Commit Graph

88 Commits

Author SHA1 Message Date
Linus Torvalds
de481ba925 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (27 commits)
  parisc: use generic atomic64 on 32-bit
  parisc: superio: fix build breakage
  parisc: Fix PCI resource allocation on non-PAT SBA machines
  parisc: perf: wire up sys_perf_counter_open
  parisc: add task_pt_regs macro
  parisc: wire sys_perf_counter_open to sys_ni_syscall
  parisc: inventory.c, fix bloated stack frame
  parisc: processor.c, fix bloated stack frame
  parisc: fix compile warning in mm/init.c
  parisc: remove dead code from sys_parisc32.c
  parisc: wire up rt_tgsigqueueinfo
  parisc: ensure broadcast tlb purge runs single threaded
  parisc: fix "delay!" timer handling
  parisc: fix mismatched parenthesis in memcpy.c
  parisc: Fix gcc 4.4 warning in lba_pci.c
  parisc: add parameter to read_cr16()
  parisc: decode_exc.c should include kernel.h
  parisc: remove obsolete hw_interrupt_type
  parisc: fix irq compile bugs in arch/parisc/kernel/irq.c
  parisc: advertise PCI devs after "assign_resources"
  ...

Manually fixed up trivial conflicts in tools/perf/perf.h due to addition
of SH vs HPPA perf-counter support.
2009-07-04 10:35:12 -07:00
Kyle McMartin
2d4618dce6 parisc: perf: wire up sys_perf_counter_open
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03 03:34:12 +00:00
Linus Torvalds
5a475ce469 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: LCDC dcache flush for deferred io
  sh: Fix compiler error and include the definition of IS_ERR_VALUE
  sh: re-add LCDC fbdev support to the Migo-R defconfig
  sh: fix se7724 ceu names
  sh: ms7724se: Enable sh_eth in defconfig.
  arch/sh/boards/mach-se/7206/io.c: Remove unnecessary semicolons
  sh: ms7724se: Add sh_eth support
  nommu: provide follow_pfn().
  sh: Kill off unused DEBUG_BOOTMEM symbol.
  perf_counter tools: add cpu_relax()/rmb() definitions for sh.
  sh64: Hook up page fault events for software perf counters.
  sh: Hook up page fault events for software perf counters.
  sh: make set_perf_counter_pending() static inline.
  clocksource: sh_tmu: Make undefined TCOR behaviour less undefined.
2009-07-01 11:46:30 -07:00
Linus Torvalds
55bcab4695 Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (47 commits)
  perf report: Add --symbols parameter
  perf report: Add --comms parameter
  perf report: Add --dsos parameter
  perf_counter tools: Adjust only prelinked symbol's addresses
  perf_counter: Provide a way to enable counters on exec
  perf_counter tools: Reduce perf stat measurement overhead/skew
  perf stat: Use percentages for scaling output
  perf_counter, x86: Update x86_pmu after WARN()
  perf stat: Micro-optimize the code: memcpy is only required if no event is selected and !null_run
  perf stat: Improve output
  perf stat: Fix multi-run stats
  perf stat: Add -n/--null option to run without counters
  perf_counter tools: Remove dead code
  perf_counter: Complete counter swap
  perf report: Print sorted callchains per histogram entries
  perf_counter tools: Prepare a small callchain framework
  perf record: Fix unhandled io return value
  perf_counter tools: Add alias for 'l1d' and 'l1i'
  perf-report: Add bare minimum PERF_EVENT_READ parsing
  perf-report: Add modes for inherited stats and no-samples
  ...
2009-06-30 19:02:59 -07:00
Arnaldo Carvalho de Melo
7bec7a9134 perf report: Add --symbols parameter
So that we can filter by symbol name.

The 'pfunct' utility in the 'dwarves' package can be used to
create a file with the functions one wants.

Example:

[acme@doppio pahole]$ pfunct /usr/lib/debug/usr/lib64/libdw-0.141.so.debug | grep dwarf > /tmp/dwarf.symbols
[acme@doppio pahole]$ wc -l /tmp/dwarf.symbols
93 /tmp/dwarf.symbols
[acme@doppio pahole]$ head -3 /tmp/dwarf.symbols
dwfl_addrdwarf
dwfl_module_getdwarf
dwfl_getdwarf
[acme@doppio pahole]$ perf report --sort comm,dso,symbol --comms pahole --dsos /usr/lib64/libdw-0.141.so --symbols file:///tmp/dwarf.symbols

    33.99%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_tag
    29.07%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_decl_file
    27.71%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_getsrclines
     4.54%            pahole  /usr/lib64/libdw-0.141.so  0x00000000007400
     3.93%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_decl_line
     0.46%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_getlocation
     0.18%            pahole  /usr/lib64/libdw-0.141.so  [.] __libdwarf_next_prime
     0.13%            pahole  /usr/lib64/libdw-0.141.so  [.] dwarf_diecu

[acme@doppio pahole]$

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-4-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 00:07:10 +02:00
Arnaldo Carvalho de Melo
cc8b88b15a perf report: Add --comms parameter
So that we can filter by comm. Symbols in other comms won't be
accounted for.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-3-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 00:07:10 +02:00
Arnaldo Carvalho de Melo
25903407da perf report: Add --dsos parameter
So that we can filter by dso. Symbols in other dsos won't be
accounted for.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246399282-20934-2-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-01 00:07:09 +02:00
Arnaldo Carvalho de Melo
f5812a7a33 perf_counter tools: Adjust only prelinked symbol's addresses
I.e. we can't handle these two kinds of files in the same way:

1) prelinked system library:

[acme@doppio pahole]$ readelf -s /usr/lib64/libdw-0.141.so | egrep 'FUNC.+GLOBAL.+dwfl_report_elf'
   278: 00000030450105a0   261 FUNC    GLOBAL DEFAULT   12 dwfl_report_elf@@ELFUTILS_0.122

2) not prelinked library with debug information from a -debuginfo package:

[acme@doppio pahole]$ readelf -s /usr/lib/debug/usr/lib64/libdw-0.141.so.debug | egrep 'FUNC.+GLOBAL.+dwfl_report_elf'
   629: 00000000000105a0   261 FUNC    GLOBAL DEFAULT   12 dwfl_report_elf
[acme@doppio pahole]$

Now the numbers I got for a pahole perf run are in line with
the numbers I get from oprofile.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090630144317.GB12663@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-30 17:09:30 +02:00
Paul Mackerras
57e7986ed1 perf_counter: Provide a way to enable counters on exec
This provides a way to mark a counter to be enabled on the next
exec. This is useful for measuring the total activity of a
program without including overhead from the process that
launches it.

This also changes the perf stat command to use this new
facility.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19017.43927.838745.689203@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-30 12:00:16 +02:00
Paul Mackerras
051ae7f734 perf_counter tools: Reduce perf stat measurement overhead/skew
Vince Weaver reported a 'perf stat' measurement overhead in the
count of retired instructions, which can amount to a +6000
instructions inflated count in the reported count.

At present, perf stat creates its counters on the perf process.  Thus
the counters count the fork and various other activity in both the
parent and child, such as the resolver overhead for resolving PLT
entries for any libc functions that haven't been called before, such
as execvp.

This reduces the overhead by creating the counters on the child process
after the fork, using a couple of pipes to synchronize so that the
child process waits until the parent has created the counters before
doing the exec.  To eliminate the PLT resolution overhead on calling
execvp, this does a dummy execvp first which will always fail.

With this, the overhead of executing a program goes down from over
4800 instructions to about 90 instructions on powerpc (32-bit).
This was measured with a statically-linked program written in
assembler which only does the 3 instructions needed to call _exit(0).

Before:

$ perf stat -e 0:1:u ./three

 Performance counter stats for './three':

           4858  instructions

    0.001274523  seconds time elapsed

After:

$ perf stat -e 0:1:u ./three

 Performance counter stats for './three':

             92  instructions

    0.000468153  seconds time elapsed

Reported-by: Vince Weaver <vince@deater.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 22:38:09 +02:00
Ingo Molnar
210ad39fb7 perf stat: Use percentages for scaling output
Peter expressed a strong preference for percentage based
display of scaled values - so revert to that from the
recently introduced multiplication-factor unit.

Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 21:50:54 +02:00
Jaswinder Singh Rajput
c3043569dc perf stat: Micro-optimize the code: memcpy is only required if no event is selected and !null_run
Set attrs and nr_counters if no event is selected and !null_run.

Setting of attrs should depend on number of counters,
so we need to memcpy only for sizeof(default_attrs)

Also set nr_counters as ARRAY_SIZE(default_attrs) in place of
hardcoded value.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1246126749.32198.16.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-28 15:22:47 +02:00
Jaswinder Singh Rajput
6e750a8fc0 perf stat: Improve output
Increase size for event name to handle bigger names like
'L1-d$-prefetch-misses'

Changed scaled counters from percentage to a multiplicative
factor because the latter is more expressive.

Also aligned the scaling factor, otherwise sometimes it looks
like:

            384  iTLB-load-misses           (4.74x scaled)
         452029  branch-loads               (8.00x scaled)
           5892  branch-load-misses         (20.39x scaled)
         972315  iTLB-loads                 (3.24x scaled)

Before:
         150708  L1-d$-stores          (scaled from 23.57%)
         428804  L1-d$-prefetches      (scaled from 23.47%)
         314446  L1-d$-prefetch-misses  (scaled from 23.42%)
      252626137  L1-i$-loads           (scaled from 23.24%)
        5297550  dTLB-load-misses      (scaled from 23.96%)
      106992392  branch-loads          (scaled from 23.67%)
        5239561  branch-load-misses    (scaled from 23.43%)

After:
        1731713  L1-d$-loads               (  14.25x scaled)
          44241  L1-d$-prefetches          (   3.88x scaled)
          21076  L1-d$-prefetch-misses     (   3.40x scaled)
        5789421  L1-i$-loads               (   3.78x scaled)
          29645  dTLB-load-misses          (   2.95x scaled)
         461474  branch-loads              (   6.52x scaled)
           7493  branch-load-misses        (  26.57x scaled)

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1246051927.2988.10.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-27 18:39:41 +02:00
Ingo Molnar
566747e629 perf stat: Fix multi-run stats
In multi-run (-r/--repeat) printouts, print out the noise of
the wall-clock average as well.

Also, fix a bug in printing out scaled counters: if it was not
scaled then we should not update the average with -1.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-27 06:34:37 +02:00
Ingo Molnar
0cfb7a13b8 perf stat: Add -n/--null option to run without counters
Allow a no-counters run. This can be useful to measure just
elapsed wall-clock time - or to assess the raw overhead of perf
stat itself, without running any counters.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-27 06:11:24 +02:00
Ingo Molnar
fde953c1c6 perf_counter tools: Remove dead code
Vince Weaver reported that there's a handful of #ifdef __MINGW32__
sections in the code.

Remove them as they are in essence dead code - as unlike upstream
Git, the perf tool is unlikely to be ported to Windows.

Reported-by: Vince Weaver <vince@deater.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-27 06:06:39 +02:00
Frederic Weisbecker
f55c555226 perf report: Print sorted callchains per histogram entries
Use the newly created callchains radix tree to gather the chains stats
from the recorded events and then print the callchains for all of them,
sorted by hits, using the "-c" parameter with perf report.

Example:

 66.15%  [k] atm_clip_exit
            63.08%
                0xffffffffffffff80
                0xffffffff810196a8
                0xffffffff810c14c8
                0xffffffff8101a79c
                0xffffffff810194f3
                0xffffffff8106ab7f
                0xffffffff8106abe5
                0xffffffff8106acde
                0xffffffff8100d94b
                0xffffffff8153e7ea
                [...]

             1.54%
                0xffffffffffffff80
                0xffffffff810196a8
                0xffffffff810c14c8
                0xffffffff8101a79c
		[...]

Symbols are not yet resolved.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246026481-8314-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-26 16:47:01 +02:00
Frederic Weisbecker
8cb76d99d7 perf_counter tools: Prepare a small callchain framework
We plan to display the callchains depending on some user-configurable
parameters.

To gather the callchains stats from the recorded stream in a fast way,
this patch introduces an ad hoc radix tree adapted for callchains and also
a rbtree to sort these callchains once we have gathered every events
from the stream.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1246026481-8314-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-26 16:47:00 +02:00
Frederic Weisbecker
3928ddbe99 perf record: Fix unhandled io return value
Building latest perfcounter fails on the following error:

 builtin-record.c: In function ‘create_counter’:
 builtin-record.c:451: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result
 make: *** [builtin-record.o] Erreur 1

Just check if we successfully read the perf file descriptor.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1245961287-5327-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 22:25:55 +02:00
Jaswinder Singh Rajput
4418351f06 perf_counter tools: Add alias for 'l1d' and 'l1i'
Add 'l1d' and 'l1i' aliases again as shortcuts - just dont make them
the primary display alias.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1245945462.9157.11.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:54:53 +02:00
Peter Zijlstra
e9ea2fde7a perf-report: Add bare minimum PERF_EVENT_READ parsing
Provide the basic infrastructure to provide per task stats.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:39:09 +02:00
Peter Zijlstra
649c48a9e7 perf-report: Add modes for inherited stats and no-samples
Now that we can collect per task statistics, add modes that
make use of that facility.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:39:08 +02:00
Peter Zijlstra
e6e18ec79b perf_counter: Rework the sample ABI
The PERF_EVENT_READ implementation made me realize we don't
actually need the sample_type int the output sample, since
we already have that in the perf_counter_attr information.

Therefore, remove the PERF_EVENT_MISC_OVERFLOW bit and the
event->type overloading, and imply put counter overflow
samples in a PERF_EVENT_SAMPLE type.

This also fixes the issue that event->type was only 32-bit
and sample_type had 64 usable bits.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:39:08 +02:00
Peter Zijlstra
7c6a1c65bb perf_counter tools: Rework the file format
Create a structured file format that includes the full
perf_counter_attr and all its relevant counter IDs so that
the reporting program has full information.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 21:39:04 +02:00
Jaswinder Singh Rajput
e5c5954779 perf_counter tools: Shorten names for events
Added new alias for events.

On AMD box:

 $ ./perf stat -e l1d -e l1d-misses -e l1d-write -e l1d-prefetch -e l1d-prefetch-miss -e l1i -e l1i-misses -e l1i-prefetch -e l2 -e l2-misses -e l2-write -e dtlb -e dtlb-misses -e itlb -e itlb-misses -e bpu -e bpu-misses -- ls -lR /usr/include/ > /dev/null

Before :

 Performance counter stats for 'ls -lR /usr/include/':

      248064467  L1-data-Cache-Load-Referencees  (scaled from 23.27%)
        1001433  L1-data-Cache-Load-Misses  (scaled from 23.34%)
         153691  L1-data-Cache-Store-Referencees  (scaled from 23.34%)
         423248  L1-data-Cache-Prefetch-Referencees  (scaled from 23.33%)
         302138  L1-data-Cache-Prefetch-Misses  (scaled from 23.25%)
      251217546  L1-instruction-Cache-Load-Referencees  (scaled from 23.25%)
        5757005  L1-instruction-Cache-Load-Misses  (scaled from 23.23%)
          93435  L1-instruction-Cache-Prefetch-Referencees  (scaled from 23.24%)
        6496073  L2-Cache-Load-Referencees  (scaled from 23.32%)
         609485  L2-Cache-Load-Misses  (scaled from 23.45%)
        6876991  L2-Cache-Store-Referencees  (scaled from 23.71%)
      248922840  Data-TLB-Cache-Load-Referencees  (scaled from 23.94%)
        5828386  Data-TLB-Cache-Load-Misses  (scaled from 24.17%)
      257613506  Instruction-TLB-Cache-Load-Referencees  (scaled from 24.20%)
           6833  Instruction-TLB-Cache-Load-Misses  (scaled from 23.88%)
      109043606  Branch-Cache-Load-Referencees  (scaled from 23.64%)
        5552296  Branch-Cache-Load-Misses  (scaled from 23.42%)

    0.413702461  seconds time elapsed.

After :

 Peformance counter stats for 'ls -lR /usr/include/':

      266590464  L1-d$-loads           (scaled from 23.03%)
        1222273  L1-d$-load-misses     (scaled from 23.58%)
         146204  L1-d$-stores          (scaled from 23.83%)
         406344  L1-d$-prefetches      (scaled from 24.09%)
         283748  L1-d$-prefetch-misses (scaled from 24.10%)
      249650965  L1-i$-loads           (scaled from 23.80%)
        3353961  L1-i$-load-misses     (scaled from 23.82%)
         104599  L1-i$-prefetches      (scaled from 23.68%)
        4836405  LLC-loads             (scaled from 23.67%)
         498214  LLC-load-misses       (scaled from 23.66%)
        4953994  LLC-stores            (scaled from 23.64%)
      243354097  dTLB-loads            (scaled from 23.77%)
        6468584  dTLB-load-misses      (scaled from 23.74%)
      249719549  iTLB-loads            (scaled from 23.25%)
           5060  iTLB-load-misses      (scaled from 23.00%)
      112343016  branch-loads          (scaled from 22.76%)
        5528876  branch-load-misses    (scaled from 22.54%)

    0.427154051  seconds time elapsed.

Reported-by : Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245934522.5308.39.camel@hpdv5.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 17:30:23 +02:00
Jaswinder Singh Rajput
06813f6c74 perf_counter tools: Check for valid cache operations
Made new table for cache operartion stat 'hw_cache_stat' as:

 L1I : Read and prefetch only
 ITLB and BPU : Read-only

introduce is_cache_op_valid() for cache operation validity

And checks for valid cache operations.

Reported-by : Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245930367.5308.33.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 14:08:49 +02:00
Johannes Weiner
76c64c5e4c perf record: Fix filemap pathname parsing in /proc/pid/maps
Looking backward for the first space from the end of a line in
/proc/pid/maps does not find the start of the pathname of the mapped
file if it contains a space.

Since the only slashes we have in this file occur in the (absolute!)
pathname column of file mappings, looking for the first slash in a
line is a safe method to find the name.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090624190835.GA25548@cmpxchg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-25 11:35:58 +02:00
Paul Mundt
febe834535 perf_counter tools: add cpu_relax()/rmb() definitions for sh.
Simple cpu_relax()/rmb() stubs that perf needs, which were inadvertently
omitted from the sh HAVE_PERF_COUNTERS patch.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-25 14:41:57 +09:00
Ingo Molnar
1b173f77dd perf_counter tools: Add CREDITS file for Git contributors
Much of perf's libraries comes from the Git project. I noticed
that the files (in tools/perf/util/*.[ch] and elsewhere) are
quite spartan wrt. credits, so lets add a CREDITS file that
includes an (incomplete!) list of main contributors.

Thanks guys, these libraries are really useful. Special thanks
go to Johannes Schindelin and Junio C Hamano for coming up with
this list.

List-Composed-By: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 19:54:29 +02:00
Jaswinder Singh Rajput
3d63259583 perf stat: Remove dead code
Remove dead code and do some code alignment.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245847774.2681.2.camel@ht.satnam>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 14:55:45 +02:00
Roel Kluin
f7679dabfa perf_counter tools: Fix strbuf_fread() error path handling
size_t res cannot be less than 0 - fread returns 0 on error.

[ Updated by: René Scharfe <rene.scharfe@lsrfire.ath.cx> ]

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Junio C Hamano <gitster@pobox.com>
LKML-Reference: <4A3FB479.2090902@lsrfire.ath.cx>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-24 10:22:06 +02:00
Jaswinder Singh Rajput
cca03c0aeb perf stat: Fix verbose for perf stat
Error message should use stderr for verbose (-v), otherwise
message will be lost for:

 $ ./perf stat -v <cmd>  > /dev/null

For example on AMD bus-cycles event is not available so now
it looks like:

 $ ./perf stat -v -e bus-cycles ls > /dev/null
Error: counter 0, sys_perf_counter_open() syscall returned with -1 (Invalid argument)

 Performance counter stats for 'ls':

  <not counted>  bus-cycles

    0.006765877  seconds time elapsed.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245757369.3776.1.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-23 21:58:44 +02:00
Ingo Molnar
b0a28589b2 perf report: Fix help text typo
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-23 16:39:53 +02:00
Peter Zijlstra
3d906ef10a perf_counter tools: Handle overlapping MMAP events
Martin Schwidefsky reported "perf report" symbol resolution
problems on S390.

Since we only report MMAP, not MUNMAP, we have to deal with
overlapping maps.

We used to simply throw out the old map on the assumption whole
maps got unmapped. This obviously doesn't deal with partial
unmaps. However it appears some dynamic linkers do fancy
partial unmaps (s390), so do something more elaborate and
truncate the old maps, only removing them when they've been
fully covered.

This resolves (part of) the S390 symbol resolution problems.

Reported-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Tested-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-23 11:42:44 +02:00
Jaswinder Singh Rajput
dee412066a perf stat: Fix command option / manpage
-l is not supported, it should be -S for scale.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245703959.6167.16.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-23 10:20:02 +02:00
Jaswinder Singh Rajput
c0c22dbfa8 perf_counter tools: Set alias for page-faults
"faults" should be alias for "page-faults"

Also fixed alignment and 80 characters issue

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245683846.12092.1.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22 17:25:53 +02:00
Peter Zijlstra
520f2c346a perf report: Output more symbol related debug data
Print more symbol relocation related info under -vv.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22 17:02:07 +02:00
Jaswinder Singh Rajput
74d5b5889e perf_counter tools: Introduce alias member in event_symbol
By introducing alias member in event_symbol :

1. duplicate lines are removed, like:
   cpu-cycles and cycles
   branch-instructions and branches
   context-switches and cs
   cpu-migrations and migrations

2. We can also add alias for another events.

Now ./perf list looks like :

List of pre-defined events (to be used in -e):

  cpu-cycles OR cycles                     [Hardware event]
  instructions                             [Hardware event]
  cache-references                         [Hardware event]
  cache-misses                             [Hardware event]
  branch-instructions OR branches          [Hardware event]
  branch-misses                            [Hardware event]
  bus-cycles                               [Hardware event]

  cpu-clock                                [Software event]
  task-clock                               [Software event]
  page-faults                              [Software event]
  faults                                   [Software event]
  minor-faults                             [Software event]
  major-faults                             [Software event]
  context-switches OR cs                   [Software event]
  cpu-migrations OR migrations             [Software event]

  rNNN                                     [raw hardware event descriptor]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245669268.17153.8.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22 13:29:58 +02:00
Jaswinder Singh Rajput
51e2684231 perf_counter tools: Define separate declarations for H/W and S/W events
Define separate declarations for H/W and S/W events to:

 1. Shorten name to save some space so that we can add more members
 2. Fix alignment
 3. Avoid declaring HARDWARE/SOFTWARE again and again.

Removed unused CR(x, y)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245669194.17153.6.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-22 13:29:57 +02:00
Martin Schwidefsky
12310e9c1b [S390] Enable tick based perf_counter on s390.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22 12:08:24 +02:00
Ingo Molnar
c1f47b454c perf_counter tools: Fix vmlinux fallback when running on a different kernel
Lucas De Marchi reported that perf report and perf annotate
displays mismatching profile if a perf.data is analyzed on
an older kernel - even if the correct vmlinux is specified
via the -k option.

The reason is the fallback path in util/symbol.c:dso__load_kernel():

int dso__load_kernel(struct dso *self, const char *vmlinux,
                     symbol_filter_t filter, int verbose)
{
        int err = -1;

        if (vmlinux)
                err = dso__load_vmlinux(self, vmlinux, filter, verbose);

        if (err)
                err = dso__load_kallsyms(self, filter, verbose);

        return err;
}

dso__load_vmlinux() returns negative on error, but on success it
returns the number of symbols loaded - which confuses the function
to load the kallsyms.

This is normally harmless, as reporting is usually performed on the
same kernel that is analyzed - but if there's a mismatch then we
load the wrong kallsyms and create a non-sensical symbol tree.

The fix is to only fall back to kallsyms on errors.

Reported-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-21 13:58:51 +02:00
Frederic Weisbecker
eadc84cc01 perfcounter: Handle some IO return values
Building perfcounter tools raises the following warnings:

 builtin-record.c: In function ‘atexit_header’:
 builtin-record.c:464: erreur: ignoring return value of ‘pwrite’, declared with attribute warn_unused_result
 builtin-record.c: In function ‘__cmd_record’:
 builtin-record.c:503: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result

 builtin-report.c: In function ‘__cmd_report’:
 builtin-report.c:1403: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result

This patch handles these IO return values.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1245456100-5477-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-20 12:30:33 +02:00
Paul Mackerras
9cffa8d533 perf_counter tools: Define and use our own u64, s64 etc. definitions
On 64-bit powerpc, __u64 is defined to be unsigned long rather than
unsigned long long.  This causes compiler warnings every time we
print a __u64 value with %Lx.

Rather than changing __u64, we define our own u64 to be unsigned long
long on all architectures, and similarly s64 as signed long long.
For consistency we also define u32, s32, u16, s16, u8 and s8.  These
definitions are put in a new header, types.h, because these definitions
are needed in util/string.h and util/symbol.h.

The main change here is the mechanical change of __[us]{64,32,16,8}
to remove the "__".  The other changes are:

* Create types.h
* Include types.h in perf.h, util/string.h and util/symbol.h
* Add types.h to the LIB_H definition in Makefile
* Added (u64) casts in process_overflow_event() and print_sym_table()
  to kill two remaining warnings.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: benh@kernel.crashing.org
LKML-Reference: <19003.33494.495844.956580@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19 18:25:47 +02:00
Peter Zijlstra
f5970550d5 perf_counter tools: Add a data file header
Add a data file header so we can transfer data between record and report.

LKML-Reference: <new-submission>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19 13:42:36 +02:00
Peter Zijlstra
2a0a50fe9d perf_counter: Update userspace callchain sampling uses
Update the tools to reflect the new callchain sampling format.

LKML-Reference: <new-submission>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-19 13:42:35 +02:00
Ingo Molnar
b8e6d82972 perf report: Filter to parent set by default
Make it easier to use parent filtering - default to a filtered
output. Also add the parent column so that we get collapsing but
dont display it by default.

add --no-exclude-other to override this.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 14:32:19 +02:00
Peter Zijlstra
9d91a6f7a4 perf_counter tools: Handle lost events
Make use of the new ->data_tail mechanism to tell kernel-space
about user-space draining the data stream. Emit lost events
(and display them) if they happen.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 14:46:11 +02:00
Paul Mackerras
e24a72c4d8 perf_counter: tools: Makefile tweaks for 64-bit powerpc
On 64-bit powerpc, perf needs to be built as a 64-bit executable.
This arranges to add the -m64 flag to CFLAGS if we are running on
a 64-bit machine, indicated by the result of uname -m ending in "64".
This means that we'll use -m64 on x86_64 machines as well.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linuxppc-dev@ozlabs.org
Cc: benh@kernel.crashing.org
LKML-Reference: <19000.55666.866148.559620@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 11:11:47 +02:00
Peter Zijlstra
a73c7d84a1 perf_counter tools: Add and use isprint()
Introduce isprint() to print out raw event dumps to ASCII, etc.

(This is an extension to upstream Git's ctype.c.)

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
[ removed openssl.h inclusion from util.h - it leaked ctype.h ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 09:46:00 +02:00
Ingo Molnar
7522060c95 perf report: Add validation of call-chain entries
Add boundary checks for call-chain events. In case of corrupted
entries we could crash otherwise.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 08:15:47 +02:00