Commit Graph

76 Commits

Author SHA1 Message Date
Johannes Berg
e174961ca1 net: convert print_mac to %pM
This converts pretty much everything to print_mac. There were
a few things that had conflicts which I have just dropped for
now, no harm done.

I've built an allyesconfig with this and looked at the files
that weren't built very carefully, but it's a huge patch.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27 17:06:18 -07:00
Bryan Wu
93fbaae188 netdev: DM9000: remove BLACKFIN hacking in DM9000 netdev driver
remove integer casting in the read/write IO accessors,
because Blackfin now provides those functions

Tested-by: Javier Herrero <jherrero@hvsistemas.es>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-22 06:22:15 -04:00
Laurent Pinchart
fe41424855 dm9000: Support MAC address setting through platform data.
The dm9000 driver reads the chip's MAC address from the attached EEPROM. When
no EEPROM is present, or when the MAC address is invalid, it falls back to
reading the address from the chip.

This patch lets platform code set the desired MAC address through platform
data.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 02:22:54 -04:00
Ben Dooks
f8e5e776a3 DM9000: Remove magic numbers
Remove magic numbers for items that we already have
defined in the register header file.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-22 17:54:07 -04:00
Ben Dooks
6ff4ff06d2 DM9000: Remove DEFAULT_TRIGGER for request_irq() flags.
Currently all but one user (AT91SAM9261EK) of the dm9000
driver passes their IRQ flags through the resources attached
to the platform device. This means we can remove the use
of DEFAULT_TRIGGER as the blackfin machines all seem to
have their triggers set properly.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-24 22:58:36 -04:00
Ben Dooks
2fcf06ca67 DM9000: Add missing msleep() in EEPROM wait code.
The msleep() call in the code that checks for the
EEPROM controller's busy status was missing.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-24 22:58:17 -04:00
Ben Dooks
f8dd0ecbb7 DM9000: Allow the use of the NSR register to get link status.
The DM9000's internal PHY reports a copy of the link status
in the NSR register of the chip. Reading the status when
polling for link status is faster as it eliminates the need
to sleep, but does not print as much information.

Add an platform flag to force this behaviour, and a Kconfig
option to allow it to be forced to the faster method always.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-24 22:58:07 -04:00
Ben Dooks
aa1eb452e8 DM9000: Use NSR to determine link-status on internal PHY
The DM9000_NSR register contains a copy of the internal PHY's
link status which we can use to determine if the link is up
or down. This eliminates the more costly (and sleeping) PHY
read when using the DM9000's own PHY.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-24 22:57:58 -04:00
Ben Dooks
f8d79e79a1 DM9000: Cleanup source code - remove forward declerations
Cleanup the source code by moving the code around to avoid
having to declare the functions before they are used.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-24 22:57:51 -04:00
Ben Dooks
59eae1fa3b DM9000: Cleanup source code
Cleanup bits of the DM9000 driver to make the code
neater and easier to read. This is includes removing
some old definitions, re-indenting areas, etc.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-24 22:57:42 -04:00
Ben Dooks
9088fa4fa2 DM9000: Cleanups after the resource changes
Remove the now extraneous checks in dm9000_release_board()
now that the two-resource case is removed. Also remove the
check on pdev->num_resources, as we check the return data
from platform_get_resource() to ensure we have not only
the right number but the right type of resources as well.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-24 22:57:28 -04:00
Ben Dooks
6d406b3c76 DM9000: Add support for DM9000A and DM9000B chips
Add support for both the DM9000A and DM9000B versions of
the DM9000 networking chip. This includes adding support
for the Link-Change IRQ which is used instead of polling
the PHY every 2 seconds.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-24 22:57:16 -04:00
Laurent Pinchart
08c3f57caa DM9000: Remove the 2 resources probe scheme.
The dm9000 driver accepts either 2 or 3 resources to describe the platform
devices. The 2 resources case abuses the ioresource mechanism by passing
ioremap()ed memory through the platform device resources. This patch removes
that case and converts boards that were using it to the 3 resources scheme.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-24 22:56:43 -04:00
David S. Miller
43154d08d6 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/cpmac.c
	net/mac80211/mlme.c
2008-05-25 23:26:10 -07:00
Andrew Morton
5bceeda325 [netdrvr] dm9000: use delayed work to update mii phy state fix
use cancel_delayed_work_sync()

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-22 06:03:28 -04:00
David S. Miller
63fe46da9c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/iwlwifi/iwl-4965-rs.c
	drivers/net/wireless/rt2x00/rt61pci.c
2008-05-15 00:34:44 -07:00
Jeff Garzik
7d2e3cb700 [netdrvr] Trim trailing whitespace for several drivers
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:41:58 -04:00
Ben Dooks
8f5bf5f25c DM9000: Use delayed work to update MII PHY state
Periodically check the MII PHY status to ensure that the
network layer's link status is updated and the user informed
of any changes.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:47 -04:00
Enrico Scholz
37d5dca6af DM9000: Update and fix driver debugging messages
There was a missing newline in a dev_dbg() message.  Values read
from/written into PHY registers might be for interest too, so I added
new dbg messages there.

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:47 -04:00
Enrico Scholz
e21fd4f07d DM9000: Add __devinit and __devexit attributes to probe and remove
There were missing __dev* annotations for the dm9000_probe()
and dm9000_drv_remove() functions.

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-13 01:31:45 -04:00
Kay Sievers
72abb46101 net drivers: fix platform driver hotplug/coldplug
Since 43cc71eed1, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable network
platform drivers, to re-enable auto loading.

NOTE: didn't change drivers/net/fs_enet/fs_enet-main.c "old binding" support.
That looks problematic in the first place (it even uses the ancient "struct
device_driver" binding scheme for platform_bus!) and I suspect it will vanish
soonish when arch/powerpc rules the world.  Also, drivers/net/ne.c would have
needed more thought to sort out.

[akpm@linux-foundation.org: fix sgiseeq.c]
[dbrownell@users.sourceforge.net: more drivers, registration fixes]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: Dale Farnsworth <dale@farnsworth.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-25 02:08:54 -04:00
Al Viro
8b9fc8ae65 dm9000 trivial annotation
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-30 14:20:24 -07:00
Peter Korsgaard
23d245b66e dm9000: Support promisc and all-multi modes
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 23:41:28 -04:00
Ben Dooks
179c743ff1 DM9000: Show the MAC address source after printing MAC
Show whether the MAC address was read from the EEPROM or
the onboard PAR registers.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:37 -05:00
Ben Dooks
513b6bee01 DM9000: Update retry count whilst identifying chip
Reading the ID register does not always return the correct ID
from the device, so we retry several times to see if we get
a correct value.

These failures seem to be excaserbated by the speed of the
access to the chip (possibly time between issuing the address
and then the data cycle).

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:36 -05:00
Ben Dooks
f42d8aeaf9 DM9000: Add support for MII ioctl() calls
Add entry to handle the MII ioctl() calls via the
generic_mii_ioctl call.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:36 -05:00
Ben Dooks
bb44fb70e0 DM9000: Add platform flag for no attached EEPROM
Allow the platform data to specify to the DM9000 driver
that there is no posibility of an attached EEPROM on the
device, so default all reads to 0xff and ignore any
write operations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:35 -05:00
Ben Dooks
073d3f46e5 DM9000: Remove redudant use of "& 0xff"
The writing of the data should implicitly truncate
the data to 8bits, so do not bother with the ands
in the code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:34 -05:00
Ben Dooks
d39cb7866e DM9000: Remove cal_CRC() and use ether_crc_le instead
Remove the cal_CRC as this is basically wrappering the
ether_crc_le function, and is only being used by the
multicast hash table functions.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:34 -05:00
Ben Dooks
39c341a8dc DM9000: Fix delays used by EEPROM read and write
The code was using a delay of 8ms, when it should have been
using the EEPROM status flag from the device to indicate the
EEPROM transaction had finished.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:33 -05:00
Ben Dooks
c991d168cb DM9000: Use netif_msg to enable debugging options
Use the netif_msg_*() macros to enable the debugging based
on the board's msg_enable field. The output still goes via
the dev_dbg() macros, so will be tagged and output as
appropriate.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:32 -05:00
Ben Dooks
41c340f0f8 DM9000: Remove unnecessary changelog in header comment
We have a perfectly good version control system, so we do not
need to duplicate change comments in the header for this code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:32 -05:00
Ben Dooks
621ddcb046 DM9000: Ensure spinlock held whilst accessing EEPROM registers
Ensure we hold the spinlock whilst the registers and being
modified even though we hold the overall lock. This should
protect against an interrupt happening whilst we are using
the device.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:31 -05:00
Ben Dooks
3927f1c88e DM9000: Remove EEPROM initialisation code.
Remove the old hack to program an initial EEPROM setting
into the DM9000 as we now have ethtool support for reading
and writing the EEPROM.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:30 -05:00
Ben Dooks
e662ee02cc DM9000: Add ethtool control of msg_enable value
Allow the msg_enable value to be read and written by
the ethtool interface.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:30 -05:00
Ben Dooks
29d52e545f DM9000: Add ethtool support for reading and writing EEPROM
Add ethtool support to access the configuration EEPROM
connected to the DM9000.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:29 -05:00
Ben Dooks
9a2f037cdb DM9000: Add mutex to protect access
Add a mutex to serialise access to the chip functions from
entries such as the ethtool and the MII code. This should
reduce the amount of time the spinlock is held to protect
the address register.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:28 -05:00
Ben Dooks
86c62fab5a DM9000: Remove barely used SROM array read.
The srom array in the board data is only being used in the device probe
routines. The probe also only uses the first 6 bytes of an array
we spend 512ms reading 128 bytes from. Change to reading the
MAC area directly to the MAC address structure.

As a side product, we rename the read_srom_word to dm9000_read_eeprom
to bring it into line with the rest of the driver. No change is made
to the delay in this function, which will be dealt with in a later
patch.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:28 -05:00
Ben Dooks
321f69a4c3 DM9000: Use msleep() instead of udelay()
We can use sleeping functions when reading and writing the
PHY registers, so let us sleep instead of busy waiting for
the PHY.

Note, this also fixes a bug reading the PHY where only 100uS
was being used instead of 150uS

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:27 -05:00
Ben Dooks
89c8b0e6cd DM9000: Do not sleep with spinlock and IRQs held
The phy read and write routines call udelay() with the board
lock held, and with the posibility of IRQs being disabled. Since
these delays can be up to 500usec, and are only required as we
have to save the chip's address register.

To improve the behaviour, hold the lock whilst we are writing
and then restore the state before the delay and then repeat
the process once the delay has happened.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:26 -05:00
Ben Dooks
7da9985917 DM9000: Add initial ethtool support
Add support for ethtool operations for the DM9000.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:25 -05:00
Ben Dooks
fcfa81aa3e DM9000: Remove old timer based poll routines
Remove the timer based MII phy polling, as this is
currently broken with the new EEPROM code that now
uses mutexes to protect the phy access.

This will need to be replaced in the future by some
form of mutex safe mechanism for reading the MII
phy status.

The replacement has not been done here as changing
this patch, which is early in the sequence has quite
a knock-on effect. Once this series is merged, then
a new presentation of an patch to poll the MII link
status can be added.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:25 -05:00
Ben Dooks
1a5f1c4ff8 DM9000: Pass IRQ flags via platform resources
Use the flags in the IRQ resource to specify the type of
IRQ being requested, so that systems which do not have
level-based interrupts, or change the interrupt in some
other way can specify this without making an #ifdef mess
in the driver.

This is specifically designed to undo the change in commit
4e4fc05a2b which hardwires the
type for everyone but blackfin to IRQT_RISING, which breaks
all a number of Simtec boards which use (and setup in the
bootloader) active low IRQs.

Note, although there where originally objections due to
the use of IORESOURCE_IRQ and IRQT_ flags not sharing the
same definition, at least <include/linux/interrupt.h> notes
these are the same.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
CC: Daniel Mack <daniel@caiaq.de>
CC: Bryan Wu <bryan.wu@analog.com>
CC: Alex Landau <landau.alex@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:24 -05:00
Ben Dooks
5b2b4ff055 DM9000 update debugging macros to use debug level
Change the debug macros to use the compiler to elide any
unnecessary debug level, and to allow device configurable
debug control.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:06:23 -05:00
Ben Dooks
a76836f95d DM9000 use dev_xxx() instead of printk for output.
Move to using dev_dbg() and friends for the output of
information to the user.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:05:23 -05:00
Ben Dooks
33ba509191 DM9000: Add platform data to specify external phy
Patch from: Laurent Pinchart <laurentp@cse-semaphore.com>

This patch adds a flag to the DM9000 platform data which, when set,
configures the device to use an external PHY.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Ben Dooks <ben-linuy@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:05:22 -05:00
Ben Dooks
931165739a DM9000: Fix endian-ness of data accesses.
Patch from: Laurent Pinchart <laurentp@cse-semaphore.com>

This patch splits the receive status in 8bit wide fields and convert the
packet length from little endian to CPU byte order.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-11 11:05:15 -05:00
Daniel Mack
4e4fc05a2b [ARM] 4762/1: Basic support for Toradex Colibri module
This patch adds support for Toradex' PXA27x based Colibri module.
It's kept as simple as possible to only provide basic functionality.
A default config is also included.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 13:13:27 +00:00
Mike Rapoport
418d6f871b DM9000 initialization fix
DM9000 driver returns success even if it is failed to detect the chip.
Below patch fixes it.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>

 drivers/net/dm9000.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-19 23:00:01 -04:00
Joe Perches
0795af5729 [NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()
This is nicer than the MAC_FMT stuff.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:42 -07:00