Commit Graph

23 Commits

Author SHA1 Message Date
Kay Sievers
1901fb2604 Driver core: fix "driver" symlink timing
Create the "driver" link before the child device may be created by
the probing logic. This makes it possible for userspace (udev), to
determine the driver property of the parent device, at the time the
child device is created.

Signed-off-by: Kay Sievers <kay.sievers@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:51:58 -08:00
Benjamin Herrenschmidt
116af37820 Driver core: add notification of bus events
I finally did as you suggested and added the notifier to the struct
bus_type itself. There are still problems to be expected is something
attaches to a bus type where the code can hook in different struct
device sub-classes (which is imho a big bogosity but I won't even try to
argue that case now) but it will solve nicely a number of issues I've
had so far.

That also means that clients interested in registering for such
notifications have to do it before devices are added and after bus types
are registered. Fortunately, most bus types that matter for the various
usage scenarios I have in mind are registerd at postcore_initcall time,
which means I have a really nice spot at arch_initcall time to add my
notifiers.

There are 4 notifications provided. Device being added (before hooked to
the bus) and removed (failure of previous case or after being unhooked
from the bus), along with driver being bound to a device and about to be
unbound.

The usage I have for these are:

 - The 2 first ones are used to maintain a struct device_ext that is
hooked to struct device.firmware_data. This structure contains for now a
pointer to the Open Firmware node related to the device (if any), the
NUMA node ID (for quick access to it) and the DMA operations pointers &
iommu table instance for DMA to/from this device. For bus types I own
(like IBM VIO or EBUS), I just maintain that structure directly from the
bus code when creating the devices. But for bus types managed by generic
code like PCI or platform (actually, of_platform which is a variation of
platform linked to Open Firmware device-tree), I need this notifier.

 - The other two ones have a completely different usage scenario. I have
cases where multiple devices and their drivers depend on each other. For
example, the IBM EMAC network driver needs to attach to a MAL DMA engine
which is a separate device, and a PHY interface which is also a separate
device. They are all of_platform_device's (well, about to be with my
upcoming patches) but there is no say in what precise order the core
will "probe" them and instanciate the various modules. The solution I
found for that is to have the drivers for emac to use multithread_probe,
and wait for a driver to be bound to the target MAL and PHY control
devices (the device-tree contains reference to the MAL and PHY interface
nodes, which I can then match to of_platform_devices). Right now, I've
been polling, but with that notifier, I can more cleanly wait (with a
timeout of course).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:51:58 -08:00
Andrew Morton
735a7ffb73 [PATCH] drivers: wait for threaded probes between initcall levels
The multithreaded-probing code has a problem: after one initcall level (eg,
core_initcall) has been processed, we will then start processing the next
level (postcore_initcall) while the kernel threads which are handling
core_initcall are still executing.  This breaks the guarantees which the
layered initcalls previously gave us.

IOW, we want to be multithreaded _within_ an initcall level, but not between
different levels.

Fix that up by causing the probing code to wait for all outstanding probes at
one level to complete before we start processing the next level.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-27 15:34:51 -07:00
Akinobu Mita
4d66423820 driver core: kmalloc() failure check in driver_probe_device
driver_probe_device() is missing kmalloc() failure check.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18 12:49:56 -07:00
Duncan Sands
0fbf116d12 Driver core: plug device probe memory leak
Make sure data is freed if the kthread fails to start.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18 12:49:54 -07:00
Alan Stern
f2eaae197f Driver core: Fix potential deadlock in driver core
There is a potential deadlock in the driver core.  It boils down to
the fact that bus_remove_device() calls klist_remove() instead of
klist_del(), thereby waiting until the reference count of the
klist_node in the bus's klist of devices drops to 0.  The refcount
can't reach 0 so long as a modprobe process is trying to bind a new
driver to the device being removed, by calling __driver_attach().  The
problem is that __driver_attach() tries to acquire the device's
parent's semaphore, but the caller of bus_remove_device() is quite
likely to own that semaphore already.

It isn't sufficient just to replace klist_remove() with klist_del().
Doing so runs the risk that the device would remain on the bus's klist
of devices for some time, and so could be bound to another driver even
after it was unregistered.  What's needed is a new way to distinguish
whether or not a device is registered, based on a criterion other than
whether its klist_node is linked into the bus's klist of devices.  That
way driver binding can fail when the device is unregistered, even if
it is still linked into the klist.

This patch (as782) implements the solution, by adding a new bitflag to
indiate when a struct device is registered, by testing the flag before
allowing a driver to bind a device, and by changing the definition of
the device_is_registered() inline.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25 21:08:40 -07:00
Greg Kroah-Hartman
d779249ed4 Driver Core: add ability for drivers to do a threaded probe
This adds the infrastructure for drivers to do a threaded probe, and
waits at init time for all currently outstanding probes to complete.

A new kernel thread will be created when the probe() function for the
driver is called, if the multithread_probe bit is set in the driver
saying it can support this kind of operation.

I have tested this with USB and PCI, and it works, and shaves off a lot
of time in the boot process, but there are issues with finding root boot
disks, and some USB drivers assume that this can never happen, so it is
currently not enabled for any bus type.  Individual drivers can enable
this right now if they wish, and bus authors can selectivly turn it on
as well, once they determine that their subsystem will work properly
with it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25 21:08:40 -07:00
Andrew Morton
f86db396ff drivers/base: check errors
Add lots of return-value checking.

<pcornelia.huck@de.ibm.com>: fix bus_rescan_devices()]
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25 21:08:39 -07:00
Alan Stern
0f836ca4c1 [PATCH] driver core: safely unbind drivers for devices not on a bus
This patch (as667) changes the __device_release_driver() routine to
prevent it from crashing when it runs across a device not on any bus.
This seems logical, inasmuch as the corresponding bus_add_device()
routine has an explicit check allowing it to accept such devices.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-14 11:41:24 -07:00
Russell King
594c8281f9 [PATCH] Add bus_type probe, remove, shutdown methods.
Add bus_type probe, remove and shutdown methods to replace the
corresponding methods in struct device_driver.  This matches
the way we handle the suspend/resume methods.

Since the bus methods override the device_driver methods, warn
if a device driver is registered whose methods will not be
called.

The long-term idea is to remove the device_driver methods entirely.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-13 11:26:04 -08:00
Alan Stern
bf74ad5bc4 [PATCH] Hold the device's parent's lock during probe and remove
This patch (as604) makes the driver core hold a device's parent's lock
as well as the device's lock during calls to the probe and remove
methods in a driver.  This facility is needed by USB device drivers,
owing to the peculiar way USB devices work:

	A device provides multiple interfaces, and drivers are bound
	to interfaces rather than to devices;

	Nevertheless a reset, reset-configuration, suspend, or resume
	affects the entire device and requires the caller to hold the
	lock for the device, not just a lock for one of the interfaces.

Since a USB driver's probe method is always called with the interface
lock held, the locking order rules (always lock parent before child)
prevent these methods from acquiring the device lock.  The solution
provided here is to call all probe and remove methods, for all devices
(not just USB), with the parent lock already acquired.

Although currently only the USB subsystem requires these changes, people
have mentioned in prior discussion that the overhead of acquiring an
extra semaphore in all the prove/remove sequences is not overly large.

Up to now, the USB core has been using its own set of private
semaphores.  A followup patch will remove them, relying entirely on the
device semaphores provided by the driver core.

The code paths affected by this patch are:

	device_add and device_del: The USB core already holds the parent
	lock, so no actual change is needed.

	driver_register and driver_unregister: The driver core will now
	lock both the parent and the device before probing or removing.

	driver_bind and driver_unbind (in sysfs): These routines will
	now lock both the parent and the device before binding or
	unbinding.

	bus_rescan_devices: The helper routine will lock the parent
	before probing a device.

I have not tested this patch for conflicts with other subsystems.  As
far as I can see, the only possibility of conflict would lie in the
bus_rescan_devices pathway, and it seems pretty remote.  Nevertheless,
it would be good for this to get a lot of testing in -mm.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Alan Stern
2b08c8d046 [PATCH] Small fixes to driver core
This patch (as603) makes a few small fixes to the driver core:

Change spin_lock_irq for a klist lock to spin_lock;

Fix reference count leaks;

Minor spelling and formatting changes.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23 23:03:06 -08:00
Daniel Ritz
4c898c7f2f [PATCH] Driver Core: fis bus rescan devices race
bus_rescan_devices_helper() does not hold the dev->sem when it checks for
!dev->driver().  device_attach() holds the sem, but calls again
device_bind_driver() even when dev->driver is set.

What happens is that a first device_attach() call (module insertion time)
is on the way binding the device to a driver.  Another thread calls
bus_rescan_devices().  Now when bus_rescan_devices_helper() checks for
dev->driver it is still NULL 'cos the the prior device_attach() is not yet
finished.  But as soon as the first one releases the dev->sem the second
device_attach() tries to rebind the already bound device again.
device_bind_driver() does this blindly which leads to a corrupt
driver->klist_devices list (the device links itself, the head points to the
device).  Later a call to device_release_driver() sets dev->driver to NULL
and breaks the link it has to itself on knode_driver.  Rmmoding the driver
later calls driver_detach() which leads to an endless loop 'cos the list
head in klist_devices still points to the device.  And since dev->driver is
NULL it's stuck with the same device forever.  Boom.  And rmmod hangs.

Very easy to reproduce with new-style pcmcia and a 16bit card.  Just loop
modprobe <pcmcia-modules> ;cardctl eject; rmmod <card driver, pcmcia
modules>.

Easiest fix is to check if the device is already bound to a driver in
device_bind_driver().  This avoids the double binding.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-22 07:58:24 -07:00
James Bottomley
d856f1e337 [PATCH] klist: fix klist to have the same klist_add semantics as list_head
at the moment, the list_head semantics are

list_add(node, head)

whereas current klist semantics are

klist_add(head, node)

This is bound to cause confusion, and since klist is the newcomer, it
should follow the list_head semantics.

I also added missing include guards to klist.h

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 16:03:13 -07:00
Greg Kroah-Hartman
afdce75f1e [PATCH] driver core: Add the ability to bind drivers to devices from userspace
This adds a single file, "bind", to the sysfs directory of every driver
registered with the driver core.  To bind a device to a driver, write
the bus id of the device you wish to bind to that specific driver to the
"bind" file (remember to not add a trailing \n).  If that bus id matches
a device on that bus, and it does not currently have a driver bound to
it, the probe sequence will be initiated with that driver and device.

Note, this requires that the driver itself be willing and able to accept
that device (usually through a device id type table).  This patch does
not make it possible to override the driver's id table.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-29 22:48:04 -07:00
Hannes Reinecke
ca2b94ba12 [PATCH] driver core: fix error handling in bus_add_device
The error handling in bus_add_device() and device_attach() is simply
non-existing. This patch propagates any error from device_attach to
the upper layers to allow for a proper recovery.

From: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:31 -07:00
Alan Stern
c95a6b057b [PATCH] driver core: Fix races in driver_detach()
This patch is intended for your "driver" tree.  It fixes several subtle
races in driver_detach() and device_release_driver() in the driver-model
core.

The major change is to use klist_remove() rather than klist_del() when
taking a device off its driver's list.  There's no other way to guarantee
that the list pointers will be updated before some other driver binds to
the device.  For this to work driver_detach() can't use a klist iterator,
so the loop over the devices must be written out in full.  In addition the
patch protects against the possibility that, when a driver and a device
are unregistered at the same time, one may be unloaded from memory before
the other is finished using it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:28 -07:00
Patrick Mochel
0d3e5a2e39 [PATCH] Driver Core: fix bk-driver-core kills ppc64
There's no check to see if the device is already bound to a driver, which
could do bad things.  The first thing to go wrong is that it will try to match
a driver with a device already bound to one.  In some cases (it appears with
USB with drivers/usb/core/usb.c::usb_match_id()), some drivers will match a
device based on the class type, so it would be common (especially for HID
devices) to match a device that is already bound.

The fun comes when ->probe() is called, it fails, then
driver_probe_device() does this:

	dev->driver = NULL;

Later on, that pointer could be be dereferenced without checking and cause
hell to break loose.

This problem could be nasty. It's very hardware dependent, since some
devices could have a different set of matching qualifiers than others.

Now, I don't quite see exactly where/how you were getting that crash.
You're dereferencing bad memory, but I'm not sure which pointer was bad
and where it came from, but it could have come from a couple of different
places.

The patch below will hopefully fix it all up for you. It's against
2.6.12-rc2-mm1, and does the following:

- Move logic to driver_probe_device() and comments uncommon returns:
  1 - If device is bound
  0 - If device not bound, and no error
  error - If there was an error.

- Move locking to caller of that function, since we want to lock a
  device for the entire time we're trying to bind it to a driver (to
  prevent against a driver being loaded at the same time).

- Update __device_attach() and __driver_attach() to do that locking.

- Check if device is already bound in __driver_attach()

- Update the converse device_release_driver() so it locks the device
  around all of the operations.

- Mark driver_probe_device() as static and remove export. It's an
  internal function, it should stay that way, and there are no other
  callers. If there is ever a need to export it, we can audit it as
  necessary.

Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-20 15:15:27 -07:00
gregkh@suse.de
b86c1df1f9 [PATCH] Driver core: Fix up the driver and device iterators to be quieter
Also stops looping over the lists when a match is found.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de
2005-06-20 15:15:27 -07:00
mochel@digitalimplant.org
0956af53af [PATCH] Call klist_del() instead of klist_remove().
- Can't wait on removing the current item in the list (the positive refcount *because*
  we are using it causes it to deadlock).

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:19 -07:00
mochel@digitalimplant.org
2287c322b6 [PATCH] Use bus_for_each_{dev,drv} for driver binding.
- Now possible, since the lists are locked using the klist lock and not the
  global rwsem.

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:17 -07:00
mochel@digitalimplant.org
94e7b1c5ff [PATCH] Add a klist to struct device_driver for the devices bound to it.
- Use it in driver_for_each_device() instead of the regular list_head and stop using
  the bus's rwsem for protection.
- Use driver_for_each_device() in driver_detach() so we don't deadlock on the
  bus's rwsem.
- Remove ->devices.
- Move klist access and sysfs link access out from under device's semaphore, since
  they're synchronized through other means.

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:16 -07:00
mochel@digitalimplant.org
07e4a3e27f [PATCH] Move device/driver code to drivers/base/dd.c
This relocates the driver binding/unbinding code to drivers/base/dd.c. This is done
for two reasons: One, it's not code related to the bus_type itself; it uses some from
that, some from devices, and some from drivers. And Two, it will make it easier to do
some of the upcoming lock removal on that code..

Signed-off-by: Patrick Mochel <mochel@digitalimplant.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:13 -07:00