Commit Graph

15 Commits

Author SHA1 Message Date
Maciej W. Rozycki
043ebd6c9d [MIPS] DECstation: Document more MB ASIC register bits
Document a few more register bits provided by the MB ASIC used on R4000SC
(KN04) and R4400SC (KN05) CPU daughtercards with the DECstation.  

 Reverse-engineered and not documented anywhere else to the best of my
knowledge.  Bit names appended to the last underscore the same as reported
by the firmware in register dumps.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-07-15 18:44:30 +01:00
Yoichi Yuasa
4247417d84 [MIPS] add DECstation I/O ASIC clocksource
Add DECstation I/O ASIC clocksource

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-04-28 17:14:32 +01:00
Maciej W. Rozycki
8b4a40809e zs: move to the serial subsystem
This is a reimplementation of the zs driver for the serial subsystem.  Any
resemblance to the old driver is purely coincidential.  ;-) I do hope I got
the handling of modem lines right -- better do not tackle me about the
issue unless you feel too good...

Any users of the old driver: please note the numbers of the serial lines
have now been swapped, i.e.  ttyS0 <-> ttyS1 and ttyS2 <-> ttyS3.  It has
to do with the modem lines mentioned above; basically the port A in a given
chip has to be initialised before the port B if you want to use the latter
as the serial console (which is usually the case), as operations on modem
lines of the serial line associated with the port B access both ports (see
the comment at the top of the driver for the details of wiring used).
Please update your scripts.

This is also the reason each SCC now requests an IRQ once only (as seen in
"/proc/interrupts") -- the handler takes care of both ports at once as the
line associated with the port B has to take status update interrupts from
both ports (and yet the line of the port A takes its own for itself too).
The old driver never got it right...

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18 08:38:22 -07:00
Maciej W. Rozycki
33cf45b90e [TC] TURBOchannel support for the DECstation
This is the platform-specific part of TURBOchannel bus support for the
DECstation.  It implements determining whether the bus is actually there,
getting bus parameters, IRQ assignments for devices and protected accesses
to possibly unoccupied slots that may trigger bus error exceptions.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-09 16:23:16 +00:00
Maciej W. Rozycki
b454cc6636 [TC] MIPS: TURBOchannel update to the driver model
This is a set of changes to convert support for the TURBOchannel bus to the
driver model.  It implements the usual set of calls similar to what other bus
drivers have: tc_register_driver(), tc_unregister_driver(), etc.  All the
platform-specific bits have been removed and headers from asm-mips/dec/ have
been merged into linux/tc.h, which should be included by drivers.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-09 16:23:15 +00:00
Atsushi Nemoto
97dcb82de6 [MIPS] Define MIPS_CPU_IRQ_BASE in generic header
The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all
platforms and are same value on most platforms (0 or 16, depends on
CONFIG_I8259).  Define them in asm-mips/mach-generic/irq.h and make
them customizable.  This will save a few cycle on each CPU interrupt.

A good side effect is removing some dependencies to MALTA in generic
SMTC code.

Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq
mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing
them might cause some header dependency problem and there seems no
good reason to customize it.  So currently only VR41XX is using custom
MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259.

Testing this patch on those platforms is greatly appreciated.  Thank
you.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06 16:53:08 +00:00
Atsushi Nemoto
1603b5aca4 [MIPS] IRQ cleanups
This is a big irq cleanup patch.

* Use set_irq_chip() to register irq_chip.
* Initialize .mask, .unmask, .mask_ack field.  Functions for these
  method are already exist in most case.
* Do not initialize .startup, .shutdown, .enable, .disable fields if
  default routines provided by irq_chip_set_defaults() were suitable.
* Remove redundant irq_desc initializations.
* Remove unnecessary local_irq_save/local_irq_restore, spin_lock.

With this cleanup, it would be easy to switch to slightly lightwait
irq flow handlers (handle_level_irq(), etc.) instead of __do_IRQ().

Though whole this patch is quite large, changes in each irq_chip are
not quite simple.  Please review and test on your platform.  Thanks.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30 01:14:46 +00:00
Ralf Baechle
6dab2f4564 [MIPS] DEC: pt_regs fixes for buserror handlers
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:15:28 +01:00
David Woodhouse
62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Maciej W. Rozycki
a5fc9c0bbe Use physical addresses at the interface level, letting drivers remap
them as appropriate.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:35 +01:00
Maciej W. Rozycki
64dac503e8 System-specific handling of bus errors for DECstation variations
supporting parity errors only for memory (Pmax/3min/Maxine).
Fixes for resources decoded by the KN04/KN05 MB ASIC.  Additional
clean-ups for the ECC handler.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:30 +01:00
Maciej W. Rozycki
a76f9fe122 GCC 4.0.0 broke `attribute(("alias"))' -- resort to an assembly variant.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:24 +01:00
Maciej W. Rozycki
3bd4c902da Deal with the bloody KSEG vs CKSEG horror...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:23 +01:00
Ralf Baechle
875d43e72b [PATCH] mips: clean up 32/64-bit configuration
Start cleaning 32-bit vs. 64-bit configuration.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:06 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00