Commit Graph

32 Commits

Author SHA1 Message Date
David Gibson
e58923ed14 [POWERPC] Add arch/powerpc driver for UIC, PPC4xx interrupt controller
This patch adds a driver to arch/powerpc/sysdev for the UIC, the
on-chip interrupt controller from IBM/AMCC 4xx chips.  It uses the new
irq host mapping infrastructure.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 21:32:01 +10:00
Jon Loeliger
3e4e97f42e [POWERPC] 86xx/85xx: Move 8641 PCI-Express to arch/powerpc/sysdev/fsl_pcie.c.
This move sets the stage for the use of generic PCI Express
code in 85xx and 86xx parts from FSL.  Subsequent patches
for 8548 and 8544 will be able to use this shared code.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-03-26 17:03:25 -05:00
Johannes Berg
17e638bc28 [POWERPC] Generic time suspend/resume code
This removes the time suspend/restore code that was done through
a PMU notifier in arch/platforms/powermac/time.c.

Instead, introduce arch/powerpc/sysdev/timer.c which creates a sys
device and handles time of day suspend/resume through that.

This should probably be replaced by using the generic RTC framework
but for now it gets rid of the arcane powermac specific hack.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26 12:35:14 +10:00
Christian Krafft
0e8266437c [POWERPC] Add PMI driver for cell blade
This adds driver code for the PMI device found in future IBM products.
PMI stands for "Platform Management Interrupt" and is a way to
communicate with the BMC (Baseboard Management Controller).
It provides bidirectional communication with a low latency.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Heiko J Schick <schickhj@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-16 14:00:19 +11:00
Vitaly Bordug
f2a0bd3753 [POWERPC] 8xx: powerpc port of core CPM PIC
This covers common CPM access functions, CPM interrupt controller code,
micropatch and a few compatibility things to kee the same driver base
working with arch/ppc. This version is refined with all the comments
(mostly PIC-related) addressed.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Grant Likely
9b3a6f4ab9 [POWERPC] Don't include powerpc/sysdev/rom.o for arch/ppc builds
sysdev/rom.c is for arch/powerpc only.  Don't compile it when building
an arch/ppc kernel.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-09 17:03:02 +11:00
Kumar Gala
45d8e7aaf4 [POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set
On 85xx we don't build in dcr support because the core doesn't implement the
instructions.  This caused problems when building an 85xx kernel.  Additionally
made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE.

The 85xx build issue wasPointed out by Dai Haruki.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-10 23:15:47 -06:00
Grant Likely
39d074b2e4 [POWERPC] Move MPC52xx PIC driver into arch/powerpc/platforms/52xx
No other chips use this device, it belongs in a 52xx-specific path.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:41:36 +11:00
Vitaly Wool
28f9ec349a [POWERPC] Add of_platform support for ROM devices
This adds support for flash device descriptions to the OF device tree.
It's inspired by and partially borrowed from Sergei's patch "[RFC]
Adding MTD to device tree.patch".

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:41:24 +11:00
Grant Likely
4687522c0d [POWERPC] Don't compile arch/powerpc mpc52xx_pic driver for ARCH=ppc
arch/powerpc/sysdev/mpc52xx_pic.c breaks the ppc build

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:37 +11:00
Benjamin Herrenschmidt
4c75a6f441 [POWERPC] Generic DCR infrastructure
This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that
can be used by drivers to transparently address either native DCRs or
memory mapped DCRs. The implementation for memory mapped DCRs is done
after the binding being currently worked on for SLOF and the Axon
chipset. This patch enables it for the cell native platform

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 16:08:25 +11:00
Nicolas DET
0f6c95dcab [PATCH] Add MPC5200 Interrupt Controller support.
This adds support for the MPC52xx Interrupt controller for
ARCH=powerpc.

It includes the main code in arch/powerpc/sysdev/ as well as a header
file in include/asm-powerpc.

Signed-off-by: Nicolas DET <nd@bplan-gmbh.de>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-13 14:45:02 +11:00
David Gibson
0f03a43b8f [POWERPC] Remove todc code from ARCH=powerpc
Apparently we've copied the todc drivers, for various RTCs used in
embedded machines from ARCH=ppc to ARCH=powerpc, despite the fact that
it's never used in the latter.  This patch removes it.

If we ever need these drivers (which we probably shouldn't now the RTC
class stuff is in), we can transfer them one by one from ARCH=ppc,
removing from the hideous abomination which is the todc
"infrastructure".

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-16 16:32:30 +10:00
Li Yang
9865853851 [POWERPC] Add QUICC Engine (QE) infrastructure
Add QUICC Engine (QE) configuration, header files, and
QE management and library code that are used by QE devices
drivers.

Includes Leo's modifications up to, and including, the
platform_device to of_device adaptation:

"The series of patches add generic QE infrastructure called
qe_lib, and MPC8360EMDS board support.  Qe_lib is used by
QE device drivers such as ucc_geth driver.

This version updates QE interrupt controller to use new irq
mapping mechanism, addresses all the comments received with
last submission and includes some style fixes.

v2: Change to use device tree for BCSR and MURAM;
Remove I/O port interrupt handling code as it is not generic
enough.

v3: Address comments from Kumar;  Update definition of several
device tree nodes;  Copyright style change."

In addition, the following changes have been made:

o removed typedefs
o uint -> u32 conversions
o removed following defines:
  QE_SIZEOF_BD, BD_BUFFER_ARG, BD_BUFFER_CLEAR, BD_BUFFER,
  BD_STATUS_AND_LENGTH_SET, BD_STATUS_AND_LENGTH, and BD_BUFFER_SET
  because they hid sizeof/in_be32/out_be32 operations from the reader.
o fixed qe_snums_init() serial num assignment to use a const array
o made CONFIG_UCC_FAST select UCC_SLOW
o reduced NR_QE_IC_INTS from 128 to 64
o remove _IO_BASE, etc. defines (not used)
o removed irrelevant comments, added others to resemble removed BD_ defines
o realigned struct definitions in headers
o various other style fixes including things like pinMask -> pin_mask
o fixed a ton of whitespace issues
o marked ioregs as __be32/__be16
o removed platform_device code and redundant get_qe_base()
o removed redundant comments
o added cpu_relax() to qe_reset
o uncasted all get_property() assignments
o eliminated unneeded casts
o eliminated immrbar_phys_to_virt (not used)

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Shlomi Gridish <gridish@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 15:24:27 +10:00
Vitaly Bordug
b0c110b4f1 POWERPC: Move generic cpm2 stuff to powerpc
This moves the cpm2 common code and PIC stuff to the powerpc. Most of the files
were just copied from ppc/, with minor tuning to make it compile, and, subsequently, work.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-21 22:18:53 +04:00
Kim Phillips
bf4152dd7c [POWERPC] back up old school ipic.[hc] to arch/ppc
Keep from breaking 83xx arch/ppc build.  Back up old school arch/powerpc/sysdev/ipic.[hc] to arch/ppc/syslib.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30 10:34:33 +10:00
Benjamin Herrenschmidt
f63e115fb5 [POWERPC] Copy i8259 code back to arch/ppc
This copies the i8259 interrupt controller driver from arch/powerpc
to arch/ppc. It's currently shared by both architectures, but the upcoming
arch/powerpc interrupt changes will break the arch/ppc builds. The changes
are too important to just use #ifdef's in the driver.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 19:55:30 +10:00
Mark A. Greer
c220153654 [POWERPC] todc: add support for Time-Of-Day-Clock
This is a resubmit with a proper subject and with all comments addressed.
Applies cleanly to powerpc.git 649e857972

Mark
--

The todc code from arch/ppc supports many todc/rtc chips and is needed
in arch/powerpc.  This patch adds the todc code to arch/powerpc.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
--

 arch/powerpc/Kconfig         |    7
 arch/powerpc/sysdev/Makefile |    1
 arch/powerpc/sysdev/todc.c   |  392 ++++++++++++++++++++++++++++++++++
 include/asm-powerpc/todc.h   |  487 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 887 insertions(+)
--
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-29 16:22:46 +10:00
Zang Roy-r61911
2b9d7467a6 [POWERPC] Add tsi108 pci and platform device data register function
Add Tundra Semiconductor tsi108 pci and platform device data register
function support.

Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
Signed-off-by: Roy Zang	<tie-fei.zang@freescale.com>

 ---
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-29 16:20:36 +10:00
Anton Blanchard
8555a0029b [POWERPC] Optimise some TOC usage
Micro-optimisation - add no-minimal-toc to some more arch/powerpc Makefiles.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:25 +10:00
Kumar Gala
eed3200108 [PATCH] powerpc: Add FSL SOC library and setup code
Parse the flat device tree for devices on Freescale SOC's that we know
about (gianfar, gianfar_mdio, i2c, mpc83xx_wdt).  We need to setup
platform devices and platform data for these devices to match arch/ppc
usage.

Also add a helper function (get_immrbase) that reports the base
address of the MMIO registers on the SOC.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 11:13:22 +11:00
Kumar Gala
08264cbc9f [PATCH] powerpc: Updated Kconfig and Makefiles for 83xx support
Updated Kconfig & Makefiles in prep for adding support for the Freescale
MPC83xx family of processors to arch/powerpc.  Moved around some config
options that are more globally applicable to other PowerPC processors.
Added a temporary config option (83xx) to match existing arch/ppc support
for the MPC83xx line.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 15:35:29 +11:00
Benjamin Herrenschmidt
1beb6a7d6c [PATCH] powerpc: Experimental support for new G5 Macs (#2)
This adds some very basic support for the new machines, including the
Quad G5 (tested), and other new dual core based machines and iMac G5
iSight (untested). This is still experimental !  There is no thermal
control yet, there is no proper handing of MSIs, etc.. but it
boots, I have all 4 cores up on my machine. Compared to the previous
version of this patch, this one adds DART IOMMU support for the U4
chipset and thus should work fine on setups with more than 2Gb of RAM.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:03:17 +11:00
Kumar Gala
1cd8e50620 [PATCH] powerpc: moved ipic code to arch/powerpc
Moved 83xx and QUICC Engine interrupt handling code into arch/powerpc
as a precursor of getting 83xx sub-arch building in arch/powerpc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:48:57 +11:00
Arnd Bergmann
edf03c1ee8 [PATCH] powerpc: move mmio_nvram.c over to arch/powerpc
The nvram code formally known as bpa_nvram.c is rather
generic really, so it is quite likely to be useful to
future boards not based on cell.

This patch puts it into arch/powerpc/sysdev.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:03:04 +11:00
Paul Mackerras
09eee63471 powerpc: Move U3 IOMMU driver to arch/powerpc/sysdev
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 08:29:36 +10:00
Kumar Gala
4b24b01c6c [PATCH] powerpc: Moved dcr support to arch/powerpc
Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 20:51:22 +10:00
Paul Mackerras
830825d6c3 powerpc: Pull out MPC106 (grackle) initialization code into its own file
This is so that the 32-bit CHRP code can use it.  The MPC106
initialization code is now in arch/powerpc/sysdev/grackle.c and
is controlled by CONFIG_PPC_MPC106.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 17:16:38 +10:00
Paul Mackerras
f9bd170a87 powerpc: Merge i8259.c into arch/powerpc/sysdev
This changes the parameters for i8259_init so that it takes two
parameters: a physical address for generating an interrupt
acknowledge cycle, and an interrupt number offset.  i8259_init
now sets the irq_desc[] for its interrupts; all the callers
were doing this, and that code is gone now.  This also defines
a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and
makes the platforms that need it select that symbol.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:47:42 +10:00
Paul Mackerras
25635c71e4 ppc: Use the indirect_pci.c from arch/powerpc/sysdev
This defines a CONFIG_INDIRECT_PCI symbol to control whether it
gets used or not, and fixes the Kconfig to select that symbol for
platforms that need it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26 16:36:55 +10:00
Paul Mackerras
daec962e27 powerpc: Use arch/powerpc/mm and arch/powerpc/lib for 64-bit
This also puts a copy of indirect_pci.c in arch/powerpc/sysdev
so that we don't need to build in arch/ppc/syslib.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:25:26 +10:00
Paul Mackerras
14cf11af6c powerpc: Merge enough to start building in arch/powerpc.
This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 16:04:21 +10:00