Commit Graph

1344 Commits

Author SHA1 Message Date
Becky Bruce
b64f87c16f [POWERPC] Avoid unpaired stwcx. on some processors
The context switch code in the kernel issues a dummy stwcx. to clear the
reservation, as recommended by the architecture.  However, some processors
can have issues if this stwcx to address A occurs while the reservation
is already held to a different address B.  To avoid this problem, the dummy
stwcx. needs to be paired with a dummy lwarx to the same address.

This adds the dummy lwarx, and creates a cpu feature bit to indicate
which cpus are affected.  Tested on mpc8641_hpcn_defconfig in
arch/powerpc; build tested in arch/ppc.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-13 16:22:43 +11:00
Paul Mackerras
64c911a3f7 Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge 2007-11-13 14:28:40 +11:00
Linus Torvalds
c4888f9ffa Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (37 commits)
  [POWERPC] EEH: Make sure warning message is printed
  [POWERPC] Make altivec code in swsusp_32.S depend on CONFIG_ALTIVEC
  [POWERPC] windfarm: Fix windfarm thread freezer interaction
  [POWERPC] Fix si_addr value on low level hash failures
  [POWERPC] Refresh ppc64_defconfig and enable pasemi-related options
  [POWERPC] pasemi: Update defconfig
  [POWERPC] iSeries: Fix ref counting in vio setup
  [POWERPC] ] Fix memset size error
  [POWERPC] Fix link errors for allyesconfig
  [POWERPC] iSeries_init_IRQ non-PCI tidy
  [POWERPC] Change fallocate to match unistd.h on powerpc
  [POWERPC] EEH: Avoid crash on null device
  [POWERPC] EEH: Drivers that need reset trump others
  [POWERPC] EEH: Clean up comments
  [POWERPC] Fix off-by-one error in setting decrementer on Book E/4xx (v2)
  [POWERPC] Fix switch_slb handling of 1T ESID values
  [POWERPC] Fix build failure when CONFIG_VIRT_CPU_ACCOUNTING is not defined
  [POWERPC] Include udbg.h when using udbg_printf
  [POWERPC] Fix cache line vs. block size confusion
  [POWERPC] Fix sysctl table check failure on PowerMac
  ...
2007-11-09 15:16:52 -08:00
Kumar Gala
725fb29fd4 [POWERPC] Fix oops related to 4xx flush_tlb_page modification
kmap_atomic calls flush_tlb_page with a NULL VMA and thus we end
up dereferencing a NULL pointer to try and get the context.id.

If the VMA is null use the global pid value of 0.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-11-09 03:51:14 -06:00
Paul Mackerras
688016f4e2 Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge 2007-11-08 14:28:14 +11:00
Patrick Mansfield
f2205fbb5a [POWERPC] Change fallocate to match unistd.h on powerpc
Fix the fallocate system call on powerpc to match its unistd.h.

This implies none of these system calls are currently working with the
unistd.h sys call values:
	fallocate
	signalfd
	timerfd
	eventfd
	sync_file_range2

Signed-off-by: Patrick Mansfield <patmans@us.ibm.com>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:32 +11:00
Paul Mackerras
43875cc0a5 [POWERPC] Fix off-by-one error in setting decrementer on Book E/4xx (v2)
The decrementer in Book E and 4xx processors interrupts on the
transition from 1 to 0, rather than on the 0 to -1 transition as on
64-bit server and 32-bit "classic" (6xx/7xx/7xxx) processors.  At the
moment we subtract 1 from the count of how many decrementer ticks are
required before the next interrupt before putting it into the
decrementer, which is correct for server/classic processors, but could
possibly cause the interrupt to happen too early on Book E and 4xx if
the timebase/decrementer frequency is low.

This fixes the problem by making set_dec subtract 1 from the count for
server and classic processors, instead of having the callers subtract
1.  Since set_dec already had a bunch of ifdefs to handle different
processor types, there is no net increase in ugliness. :)

Note that calling set_dec(0) may not generate an interrupt on some
processors.  To make sure that decrementer_set_next_event always calls
set_dec with an interval of at least 1 tick, we set min_delta_ns of
the decrementer_clockevent to correspond to 2 ticks (2 rather than 1
to compensate for truncations in the conversions between ticks and
ns).

This also removes a redundant call to set the decrementer to
0x7fffffff - it was already set to that earlier in timer_interrupt.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:31 +11:00
Kamalesh Babulal
4d20826ffb cpm_load_patch() - declartion conflict
Commit f2a0bd3753 defines the function
with "void cpm_load_patch(cpm8xx_t *cp)" prtotype and is declared as
"extern void cpm_load_patch(volatile immap_t *immr)" in the header file.

Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05 11:38:29 -08:00
Benjamin Herrenschmidt
b98ac05d5e [POWERPC] 4xx: Deal with 44x virtually tagged icache
The 44x family has an interesting "feature" which is a virtually
tagged instruction cache (yuck !). So far, we haven't dealt with
it properly, which means we've been mostly lucky or people didn't
report the problems, unless people have been running custom patches
in their distro...

This is an attempt at fixing it properly. I chose to do it by
setting a global flag whenever we change a PTE that was previously
marked executable, and flush the entire instruction cache upon
return to user space when that happens.

This is a bit heavy handed, but it's hard to do more fine grained
flushes as the icbi instruction, on those processor, for some very
strange reasons (since the cache is virtually mapped) still requires
a valid TLB entry for reading in the target address space, which
isn't something I want to deal with.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-11-01 07:15:30 -05:00
Benjamin Herrenschmidt
e701d269aa [POWERPC] 4xx: Fix 4xx flush_tlb_page()
On 4xx CPUs, the current implementation of flush_tlb_page() uses
a low level _tlbie() assembly function that only works for the
current PID. Thus, invalidations caused by, for example, a COW
fault triggered by get_user_pages() from a different context will
not work properly, causing among other things, gdb breakpoints
to fail.

This patch adds a "pid" argument to _tlbie() on 4xx processors,
and uses it to flush entries in the right context. FSL BookE
also gets the argument but it seems they don't need it (their
tlbivax form ignores the PID when invalidating according to the
document I have).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-11-01 07:15:09 -05:00
Olof Johansson
5edadbd0ae powerpc: Fix fallout from sg_page() changes
Fix fallout from 18dabf473e:

In file included from include/linux/dma-mapping.h:52,
                 from drivers/base/dma-mapping.c:10:
include/asm/dma-mapping.h: In function 'dma_map_sg':
include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page'
include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page'
include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page'
include/asm/dma-mapping.h:289: error: 'struct scatterlist' has no member named 'page'
include/asm/dma-mapping.h:290: error: 'struct scatterlist' has no member named 'page'
include/asm/dma-mapping.h: In function 'dma_sync_sg_for_cpu':
include/asm/dma-mapping.h:331: error: 'struct scatterlist' has no member named 'page'

drivers/scsi/ps3rom.c: In function 'fetch_to_dev_buffer':
drivers/scsi/ps3rom.c:150: error: 'struct scatterlist' has no member named 'page'

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-23 09:13:14 +02:00
Linus Torvalds
8b0eaccab4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Enable restart support for lite5200 board
  [POWERPC] Add restart support for mpc52xx based platforms
  [POWERPC] Update device tree binding for mpc5200 gpt
  [POWERPC] Add mpc52xx_find_and_map_path(), refactor utility functions
  [POWERPC] bestcomm: Restrict bus prefetch bugfix to original mpc5200 silicon.
2007-10-22 19:21:54 -07:00
Jens Axboe
d6ec084200 Add CONFIG_DEBUG_SG sg validation
Add a Kconfig entry which will toggle some sanity checks on the sg
entry and tables.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:20:03 +02:00
Jens Axboe
18dabf473e Change table chaining layout
Change the page member of the scatterlist structure to be an unsigned
long, and encode more stuff in the lower bits:

- Bits 0 and 1 zero: this is a normal sg entry. Next sg entry is located
  at sg + 1.
- Bit 0 set: this is a chain entry, the next real entry is at ->page_link
  with the two low bits masked off.
- Bit 1 set: this is the final entry in the sg entry. sg_next() will return
  NULL when passed such an entry.

It's thus important that sg table users use the proper accessors to get
and set the page member.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:20:01 +02:00
Marian Balakowicz
86b92cdda9 [POWERPC] Add restart support for mpc52xx based platforms
Add common helper routines: mpc52xx_map_wdt() and mpc52xx_restart().

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-21 12:43:04 -06:00
Marian Balakowicz
c5c01c9700 [POWERPC] Add mpc52xx_find_and_map_path(), refactor utility functions
Add helper routine mpc52xx_find_and_map_path(). Extract common code to
mpc52xx_map_node() and refactor mpc52xx_find_and_map().

Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-21 12:42:47 -06:00
Grant Likely
c052a22e80 [POWERPC] bestcomm: Restrict bus prefetch bugfix to original mpc5200 silicon.
Only the MPC5200 needs this bug fix.  MPC5200B is okay.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-10-21 10:52:02 -06:00
Linus Torvalds
c00046c279 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (74 commits)
  fix do_sys_open() prototype
  sysfs: trivial: fix sysfs_create_file kerneldoc spelling mistake
  Documentation: Fix typo in SubmitChecklist.
  Typo: depricated -> deprecated
  Add missing profile=kvm option to Documentation/kernel-parameters.txt
  fix typo about TBI in e1000 comment
  proc.txt: Add /proc/stat field
  small documentation fixes
  Fix compiler warning in smount example program from sharedsubtree.txt
  docs/sysfs: add missing word to sysfs attribute explanation
  documentation/ext3: grammar fixes
  Documentation/java.txt: typo and grammar fixes
  Documentation/filesystems/vfs.txt: typo fix
  include/asm-*/system.h: remove unused set_rmb(), set_wmb() macros
  trivial copy_data_pages() tidy up
  Fix typo in arch/x86/kernel/tsc_32.c
  file link fix for Pegasus USB net driver help
  remove unused return within void return function
  Typo fixes retrun -> return
  x86 hpet.h: remove broken links
  ...
2007-10-19 20:36:17 -07:00
Julio M. Merino Vidal
568e0c1119 powerpc: Remove obsolete prototype
The include/asm-powerpc/paca.h file has a prototype for a function that
does not exist any more; its name is setup_boot_paca.  This function was
removed in commit 4ba99b97da, so its
prototype should have been removed at that time too.

Signed-off-by: Julio M. Merino Vidal <jmerino@ac.upc.edu>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 00:36:33 +02:00
Bartlomiej Zolnierkiewicz
18e181fe13 ide: add hwif->ack_intr hook
* Add hwif->ack_intr hook and use it instead of hwif->hw.ack_intr.

* Add missing brackets to cris-v32 and powerpc ide_ack_intr() macros.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:32 +02:00
Bartlomiej Zolnierkiewicz
847ddd2bbe ide: add CONFIG_IDE_ARCH_OBSOLETE_INIT
Add CONFIG_IDE_ARCH_OBSOLETE_INIT to drivers/ide/Kconfig and use it instead
of defining IDE_ARCH_OBSOLETE_INIT in <arch/ide.h>.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:32 +02:00
Jean Delvare
c03983ac9b Spelling fix: explicitly
From: Jean Delvare <khali@linux-fr.org>

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:22:55 +02:00
Jiri Slaby
0624517d80 forbid asm/bitops.h direct inclusion
forbid asm/bitops.h direct inclusion

Because of compile errors that may occur after bit changes if asm/bitops.h is
included directly without e.g.  linux/kernel.h which includes linux/bitops.h,
forbid direct inclusion of asm/bitops.h.  Thanks to Adrian Bunk.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:41 -07:00
Jiri Slaby
1977f03272 remove asm/bitops.h includes
remove asm/bitops.h includes

including asm/bitops directly may cause compile errors. don't include it
and include linux/bitops instead. next patch will deny including asm header
directly.

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:41 -07:00
Benjamin Herrenschmidt
1c7037db50 remove unused flush_tlb_pgtables
Nobody uses flush_tlb_pgtables anymore, this patch removes all remaining
traces of it from all archs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:34 -07:00
Nick Piggin
66ffb04ca5 powerpc: lock bitops
Add non-trivial lock bitops implementation for powerpc.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:29 -07:00
Nick Piggin
26333576fd bitops: introduce lock ops
Introduce test_and_set_bit_lock / clear_bit_unlock bitops with lock semantics.
Convert all architectures to use the generic implementation.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-By: David Howells <dhowells@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Andi Kleen <ak@muc.de>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:29 -07:00
Michael Neuling
4603ac180a powerpc: add scaled time accounting
This adds POWERPC specific hooks for scaled time accounting.

POWER6 includes a SPURR register.  The SPURR is based off the PURR register
but is scaled based on CPU frequency and issue rates.  This gives a more
accurate account of the instructions used per task.  The PURR and timebase
will be constant relative to the wall clock, irrespective of the CPU
frequency.

This implementation reads the SPURR register in account_system_vtime which
is only call called on context witch and hard and soft irq entry and exit.
The percentage of user and system time is then estimated using the ratio of
these accounted by the PURR.  If the SPURR is not present, the PURR read.

An earlier implementation of this patch read the SPURR whenever the PURR
was read, which included the system call entry and exit path.
Unfortunately this showed a performance regression on lmbench runs, so was
re-implemented.

I've included the lmbench results here when run bare metal on POWER6.  1st
column is the unpatch results.  2nd column is the results using the below
patch and the 3rd is the % diff of these results from the base.  4th and
5th columns are the results and % differnce from the base using the older
patch (SPURR read in syscall entry/exit path).

                              Base        Scaled-Acct     SPURR-in-syscall
                             Result      Result  % diff    Result % diff
Simple syscall:              0.3086      0.3086  0.0000    0.3452 11.8600
Simple read:                 0.4591      0.4671  1.7425    0.5044 9.86713
Simple write:                0.4364      0.4366  0.0458    0.4731 8.40971
Simple stat:                 2.0055      2.0295  1.1967    2.0669 3.06158
Simple fstat:                0.5962      0.5876  -1.442    0.6368 6.80979
Simple open/close:           3.1283      3.1009  -0.875    3.2088 2.57328
Select on 10 fd's:           0.8554      0.8457  -1.133    0.8667 1.32101
Select on 100 fd's:          3.5292      3.6329  2.9383    3.6664 3.88756
Select on 250 fd's:          7.9097      8.1881  3.5197    8.2242 3.97613
Select on 500 fd's:          15.2659     15.836  3.7357    15.873 3.97814
Select on 10 tcp fd's:       0.9576      0.9416  -1.670    0.9752 1.83792
Select on 100 tcp fd's:      7.248       7.2254  -0.311    7.2685 0.28283
Select on 250 tcp fd's:      17.7742     17.707  -0.375    17.749 -0.1406
Select on 500 tcp fd's:      35.4258     35.25   -0.496    35.286 -0.3929
Signal handler installation: 0.6131      0.6075  -0.913    0.647  5.52927
Signal handler overhead:     2.0919      2.1078  0.7600    2.1831 4.35967
Protection fault:            0.7345      0.7478  1.8107    0.8031 9.33968
Pipe latency:                33.006      16.398  -50.31    33.475 1.42368
AF_UNIX sock stream latency: 14.5093     30.910  113.03    30.715 111.692
Process fork+exit:           219.8       222.8   1.3648    229.37 4.35623
Process fork+execve:         876.14      873.28  -0.32     868.66 -0.8533
Process fork+/bin/sh -c:     2830        2876.5  1.6431    2958   4.52296
File /var/tmp/XXX write bw:  1193497     1195536 0.1708    118657 -0.5799
Pagefaults on /var/tmp/XXX:  3.1272      3.2117  2.7020    3.2521 3.99398

Also, kernel compile times show no difference with this patch applied.

[pbadari@us.ibm.com: Avoid unnecessary PURR reading]
Signed-off-by: Michael Neuling <mikey@neuling.org>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:28 -07:00
Rafael J. Wysocki
e6c5eb9541 PM: Rework struct platform_suspend_ops
There is no reason why the .prepare() and .finish() methods in 'struct
platform_suspend_ops' should take any arguments, since architectures don't use
these methods' argument in any practically meaningful way (ie.  either the
target system sleep state is conveyed to the platform by .set_target(), or
there is only one suspend state supported and it is indicated to the PM core
by .valid(), or .prepare() and .finish() aren't defined at all).   There also
is no reason why .finish() should return any result.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:18 -07:00
Linus Torvalds
c548f08a4f Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (24 commits)
  [POWERPC] Fix vmemmap warning in init_64.c
  [POWERPC] Fix 64 bits vDSO DWARF info for CR register
  [POWERPC] Add 1TB workaround for PA6T
  [POWERPC] Enable NO_HZ and high res timers for pseries and ppc64 configs
  [POWERPC] Quieten cache information at boot
  [POWERPC] Quieten clockevent printk
  [POWERPC] Enable SLUB in *_defconfig
  [POWERPC] Fix 1TB segment detection
  [POWERPC] Fix iSeries_hpte_insert prototype
  [POWERPC] Fix copyright symbol
  [POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and eHEA drivers
  [POWERPC] ibmebus: Add device creation and bus probing based on of_device
  [POWERPC] ibmebus: Remove bus match/probe/remove functions
  [POWERPC] Move of_device allocation into of_device.[ch]
  [POWERPC] mpc52xx: device tree changes for FEC and MDIO
  [POWERPC] bestcomm: GenBD task support
  [POWERPC] bestcomm: FEC task support
  [POWERPC] bestcomm: ATA task support
  [POWERPC] bestcomm: core bestcomm support for Freescale MPC5200
  [POWERPC] mpc52xx: Update mpc52xx_psc structure with B revision changes
  ...
2007-10-17 09:05:55 -07:00
Olaf Hering
4f9a58d75b increase AT_VECTOR_SIZE to terminate saved_auxv properly
include/asm-powerpc/elf.h has 6 entries in ARCH_DLINFO.  fs/binfmt_elf.c
has 14 unconditional NEW_AUX_ENT entries and 2 conditional NEW_AUX_ENT
entries.  So in the worst case, saved_auxv does not get an AT_NULL entry at
the end.

The saved_auxv array must be terminated with an AT_NULL entry.  Make the
size of mm_struct->saved_auxv arch dependend, based on the number of
ARCH_DLINFO entries.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: Roland McGrath <roland@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:00 -07:00
Ralf Baechle
622a9edd91 Remove dma_cache_(wback|inv|wback_inv) functions
dma_cache_(wback|inv|wback_inv) were the earliest attempt on a generalized
cache managment API for I/O purposes.  Originally it was basically the raw
MIPS low level cache API exported to the entire world.  The API has
suffered from a lack of documentation, was not very widely used unlike it's
more modern brothers and can easily be replaced by dma_cache_sync.  So
remove it rsp.  turn the surviving bits back into an arch private API, as
discussed on linux-arch.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:57 -07:00
Adrian Bunk
cba4fbbff2 remove include/asm-*/ipc.h
All asm/ipc.h files do only #include <asm-generic/ipc.h>.

This patch therefore removes all include/asm-*/ipc.h files and moves the
contents of include/asm-generic/ipc.h to include/linux/ipc.h.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Jan Beulich
9c6cdad7fe cleanup floppy.h
AUTO_DMA and FLOPPY_MOTOR_MASK in include/asm-*/floppy.h are dead symbols -
remove them.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:55 -07:00
Olaf Hering
68a9bd0cd5 remove strict ansi check from __u64 in asm/types.h
Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
32bit targets.

GCC can be made to warn about usage of long long types with ISO C90
(-ansi), but only with -pedantic.  You can write this in a way that even
then it doesn't cause warnings, namely by:

#ifdef __GNUC__
__extension__ typedef __signed__ long long __s64;
__extension__ typedef unsigned long long __u64;
#endif

The __extension__ keyword in front of this switches off any pedantic
warnings for this expression.

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:53 -07:00
Roland McGrath
5f149cf0ac powerpc: Use linux/elfcore-compat.h
This makes powerpc64's compat code use the new linux/elfcore-compat.h,
reducing some hand-copied duplication.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Andi Kleen <ak@suse.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:51 -07:00
Christoph Hellwig
04fc8bbcf5 kill DECLARE_MUTEX_LOCKED
DECLARE_MUTEX_LOCKED was used for semaphores used as completions and we've
got rid of them.  Well, except for one in libusual that the maintainer
explicitly wants to keep as semaphore.  So convert that useage to an
explicit sema_init and kill of DECLARE_MUTEX_LOCKED so that new code is
reminded to use a completion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: "Satyam Sharma" <satyam.sharma@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:47 -07:00
Olaf Hering
4029a9177f unexport asm/shmparam.h
SHMLBA cant possible be used in userspace, see sparc versions of that header.

Do not export asm/shmparam.h during make headers_install_all
This removes another uservisible place of PAGE_SIZE

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:47 -07:00
Mark Nelson
1f7d6668c2 powerpc: add Altivec/VMX state to coredumps
Update dump_task_altivec() (which has so far never been put to use) so that
it dumps the Altivec/VMX registers (VR[0] - VR[31], VSCR and VRSAVE) in the
same format as the ptrace get_vrregs(), and add the appropriate glue
typedef and #defines to make it work.

A new note type of NT_PPC_VMX was chosen to be 0x100 (arbitrarily) because
it allows the low range values to be used for more generic purposes and
0x100 seems an adequate starting point for PowerPC extensions.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:44 -07:00
Olof Johansson
f66bce5e6a [POWERPC] Add 1TB workaround for PA6T
PA6T has a bug where the slbie instruction does not honor the large
segment bit.  As a result, we have to always use slbia when switching
context.

We don't have to worry about changing the slbie's during fault processing,
since they should never be replacing one VSID with another using the
same ESID.  I.e. there's no risk for inserting duplicate entries due to a
failed slbie of the old entry.  So as long as we clear it out on context
switch we should be fine.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17 22:30:09 +10:00
Joachim Fenkes
6b08f3ae8e [POWERPC] ibmebus: Move to of_device and of_platform_driver, match eHCA and eHEA drivers
Replace struct ibmebus_dev and struct ibmebus_driver with struct of_device
and struct of_platform_driver, respectively.  Match the external ibmebus
interface and drivers using it.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17 22:30:08 +10:00
Joachim Fenkes
fec738dd48 [POWERPC] Move of_device allocation into of_device.[ch]
Extract generic of_device allocation code from of_platform_device_create()
and move it into of_device.[ch], called of_device_alloc(). Also, there's now
of_device_free() which puts the device node.

This way, bus drivers that build on of_platform (like ibmebus will) can
build upon this code instead of reinventing the wheel.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-17 22:30:07 +10:00
Anton Blanchard
33ff910f0f Fix powerpc breakage in sg chaining code
Commit 78bdc3106a ("PPC: sg chaining
support") looks to have removed some unrelated ppc code.  Lets put it
back in.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 13:10:58 -07:00
Linus Torvalds
92d15c2ccb Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits)
  Fix memory leak in dm-crypt
  SPARC64: sg chaining support
  SPARC: sg chaining support
  PPC: sg chaining support
  PS3: sg chaining support
  IA64: sg chaining support
  x86-64: enable sg chaining
  x86-64: update pci-gart iommu to sg helpers
  x86-64: update nommu to sg helpers
  x86-64: update calgary iommu to sg helpers
  swiotlb: sg chaining support
  i386: enable sg chaining
  i386 dma_map_sg: convert to using sg helpers
  mmc: need to zero sglist on init
  Panic in blk_rq_map_sg() from CCISS driver
  remove sglist_len
  remove blk_queue_max_phys_segments in libata
  revert sg segment size ifdefs
  Fixup u14-34f ENABLE_SG_CHAINING
  qla1280: enable use_sg_chaining option
  ...
2007-10-16 10:09:16 -07:00
Geert Uytterhoeven
ce4c371a9d ps3av: dont distinguish between boot' and non-boot' autodetection
don't distinguish between `boot' and `non-boot' autodetection now the
autodetection code has been improved

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:21 -07:00
Geert Uytterhoeven
466c449e5f ps3av: remove unused ps3av_set_mode()
remove unused ps3av_set_mode()

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:21 -07:00
Geert Uytterhoeven
fd5621129b ps3av: add autodetection for VESA modes
add autodetection for VESA modes

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:20 -07:00
Geert Uytterhoeven
101aa56d02 ps3av: treat DVI-D like HDMI in autodetect
treat DVI-D monitors like HDMI monitors when autodetecting the best video mode

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:20 -07:00
Geert Uytterhoeven
71a27fecaf ps3av: use PS3 video mode ids in autodetect code
It doesn't make much sense to use the PS3AV_CMD_VIDEO_VID_* values in the
autodetection code, just to convert them to PS3 video mode ids afterwards.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:20 -07:00
Geert Uytterhoeven
eea820ab0b ps3av: eliminate PS3AV_DEBUG
ps3av: eliminate PS3AV_DEBUG
  - Move ps3av_cmd_av_monitor_info_dump from ps3av_cmd.c to ps3av.c, as
it's
    used there only
  - Integrate ps3av_cmd_av_hw_conf_dump() into its sole user
  - Use pr_debug() for printing debug info

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:20 -07:00
Masami Hiramatsu
f438d914b2 kprobes: support kretprobe blacklist
Introduce architecture dependent kretprobe blacklists to prohibit users
from inserting return probes on the function in which kprobes can be
inserted but kretprobes can not.

This patch also removes "__kprobes" mark from "__switch_to" on x86_64 and
registers "__switch_to" to the blacklist on x86-64, because that mark is to
prohibit user from inserting only kretprobe.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:10 -07:00
Andy Whitcroft
d29eff7bca ppc64: SPARSEMEM_VMEMMAP support
Enable virtual memmap support for SPARSEMEM on PPC64 systems.  Slice a 16th
off the end of the linear mapping space and use that to hold the vmemmap.
Uses the same size mapping as uses in the linear 1:1 kernel mapping.

[pbadari@gmail.com: fix warning]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:51 -07:00
Christoph Hellwig
74a0b57627 x86: optimize page faults like all other achitectures and kill notifier cruft
x86(-64) are the last architectures still using the page fault notifier
cruft for the kprobes page fault hook.  This patch converts them to the
proper direct calls, and removes the now unused pagefault notifier bits
aswell as the cruft in kprobes.c that was related to this mess.

I know Andi didn't really like this, but all other architecture maintainers
agreed the direct calls are much better and besides the obvious cruft
removal a common way of dealing with kprobes across architectures is
important aswell.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix sparc64]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Andi Kleen <ak@suse.de>
Cc: <linux-arch@vger.kernel.org>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:50 -07:00
Mike Travis
d5a7430ddc Convert cpu_sibling_map to be a per cpu variable
Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu
variable.  This saves sizeof(cpumask_t) * NR unused cpus.  Access is mostly
from startup and CPU HOTPLUG functions.

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:42:50 -07:00
Jens Axboe
78bdc3106a PPC: sg chaining support
This updates the ppc iommu/pci dma mappers to sg chaining. Includes
further fixes from FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:27:32 +02:00
Jens Axboe
d1ed455e30 PS3: sg chaining support
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:27:31 +02:00
Michael Ellerman
cdbd3865ac Use dcr_host_t.base in dcr_unmap()
With the base stored in dcr_host_t, there's no need for callers to pass
the dcr_n into dcr_unmap(). In fact this removes the possibility of them
passing the incorrect value, which would then be iounmap()'ed.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15 14:29:49 -04:00
Michael Ellerman
83f34df4e7 Add dcr_host_t.base in dcr_read()/dcr_write()
Now that all users of dcr_read()/dcr_write() add the dcr_host_t.base, we
can save them the trouble and do it in dcr_read()/dcr_write().

As some background to why we just went through all this jiggery-pokery,
benh sayeth:

 Initially the goal of the dcr_read/dcr_write routines was to operate like
 mfdcr/mtdcr which take absolute DCR numbers. The reason is that on 4xx
 hardware, indirect DCR access is a pain (goes through a table of
 instructions) and it's useful to have the compiler resolve an absolute DCR
 inline.

 We decided that wasn't worth the API bastardisation since most places
 where absolute DCR values are used are low level 4xx-only code which may
 as well continue using mfdcr/mtdcr, while the new API is designed for
 device "instances" that can exist on 4xx and Axon type platforms and may
 be located at variable DCR offsets.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15 14:29:49 -04:00
Al Viro
bda76dd160 endian-clean in_le64/out_le64
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 12:41:51 -07:00
Kay Sievers
7eff2e7a8b Driver core: change add_uevent_var to use a struct
This changes the uevent buffer functions to use a struct instead of a
long list of parameters. It does no longer require the caller to do the
proper buffer termination and size accounting, which is currently wrong
in some places. It fixes a known bug where parts of the uevent
environment are overwritten because of wrong index calculations.

Many thanks to Mathieu Desnoyers for finding bugs and improving the
error handling.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00
Paul Mackerras
1189be6508 [POWERPC] Use 1TB segments
This makes the kernel use 1TB segments for all kernel mappings and for
user addresses of 1TB and above, on machines which support them
(currently POWER5+, POWER6 and PA6T).

We detect that the machine supports 1TB segments by looking at the
ibm,processor-segment-sizes property in the device tree.

We don't currently use 1TB segments for user addresses < 1T, since
that would effectively prevent 32-bit processes from using huge pages
unless we also had a way to revert to using 256MB segments.  That
would be possible but would involve extra complications (such as
keeping track of which segment size was used when HPTEs were inserted)
and is not addressed here.

Parts of this patch were originally written by Ben Herrenschmidt.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12 14:05:17 +10:00
Valentine Barshak
d94bad827d [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci
Add 64-bit physical address support to setup_indirect_pci().

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-12 14:05:17 +10:00
Paul Mackerras
8087ebd5a1 Merge branch 'for-2.6.24' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.24 2007-10-12 09:06:32 +10:00
Paul Mackerras
895532a166 Merge branch 'for-2.6.24' of git://git.secretlab.ca/git/linux-2.6-mpc52xx into for-2.6.24 2007-10-12 08:40:13 +10:00
Kumar Gala
0bfd5df53a [POWERPC] 85xx: Killed <asm/mpc85xx.h>
asm-powerpc/mpc85xx.h was really a hold over from arch/ppc.  Now that
more decoupling has occurred we can remove <asm/mpc85xx.h> and some of
its legacy.

As part of this we moved the definition of CPM_MAP_ADDR into cpm2.h
for 85xx platforms.  This is a stop gap until drivers stop using
CPM_MAP_ADDR.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-11 09:14:31 -05:00
Paul Mackerras
87a72f9e17 [POWERPC] Fix performance monitor on machines with logical PVR
Some IBM machines supply a "logical" PVR (processor version register)
value in the device tree in the cpu nodes rather than the real PVR.
This is used for instance to indicate that the processors in a POWER6
partition have been configured by the hypervisor to run in POWER5+
mode rather than POWER6 mode.  To cope with this, we call identify_cpu
a second time with the logical PVR value (the first call is with the
real PVR value in the very early setup code).

However, POWER5+ machines can also supply a logical PVR value, and use
the same value (the value that indicates a v2.04 architecture
compliant processor).  This causes problems for code that uses the
performance monitor (such as oprofile), because the PMU registers are
different in POWER6 (even in POWER5+ mode) from the real POWER5+.

This change works around this problem by taking out the PMU
information from the cputable entries for the logical PVR values, and
changing identify_cpu so that the second call to it won't overwrite
the PMU information that was established by the first call (the one
with the real PVR), but does update the other fields.  Specifically,
if the cputable entry for the logical PVR value has num_pmcs == 0,
none of the PMU-related fields get used.

So that we can create a mixed cputable entry, we now make cur_cpu_spec
point to a single static struct cpu_spec, and copy stuff from
cpu_specs[i] into it.  This has the side-effect that we can now make
cpu_specs[] be initdata.

Ultimately it would be good to move the PMU-related fields out to a
separate structure, pointed to by the cputable entries, and change
identify_cpu so that it saves the PMU info pointer, copies the whole
structure, and restores the PMU info pointer, rather than identify_cpu
having to list all the fields that are *not* PMU-related.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2007-10-11 21:37:50 +10:00
Stephen Rothwell
8251b4c481 [POWERPC] iSeries: Move viodasd probing
This way we only have entries in the device tree for disks that actually
exist.  A slight complication is that disks may be attached to LPARs
at runtime.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:48 +10:00
Stephen Rothwell
7465ce0db3 [POWERPC] iSeries: Move detection of virtual tapes
Now we will only have entries in the device tree for the actual existing
devices (including their OS/400 properties).  This way viotape.c gets
all the information about the devices from the device tree.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:47 +10:00
Stephen Rothwell
b833b481c1 [POWERPC] iSeries: Move detection of virtual cdroms
Now we will only have entries in the device tree for the actual existing
devices (including their OS/400 properties).  This way viocd.c gets all
the information about the devices from the device tree.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:47 +10:00
Stephen Rothwell
dd9b67ab37 [POWERPC] Remove more iSeries-specific stuff from vio.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:46 +10:00
Stephen Rothwell
1670b2b271 [POWERPC] Remove iSeries_vio_dev
It was only being used to carry around dma_iommu_ops and vio_iommu_table
which we can use directly instead.  This also means that vio_bus_device
doesn't need to refer to them either.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:45 +10:00
Stephen Rothwell
b707f517d2 [POWERPC] Clean up vio.h
Remove vio_dma_ops declaration (since it no longer exists) and some
unused fields from struct vio_driver.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:44 +10:00
Grant Likely
38db7e740a [POWERPC] Only call ppc_md.setup_arch() if it is provided
This allows platforms which don't have anything to do at setup_arch time
(like a bunch of the 4xx platforms) to eliminate an empty setup_arch hook.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:39:36 +10:00
Grant Likely
4de3b992a6 [POWERPC] MPC5200: Don't make firmware fixups into common code
The Lite5200 u-boot image doesn't entirely configure the processor
correctly and so Linux needs to fixup the cpu setup in setup_arch.  Fixing
the CPU setup is good, but making it into common code is not a good idea.

New board ports should be encouraged not to take the lead of the lite5200
and instead get their firmware to setup the CPU the right way.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tnt.com>
2007-10-10 10:22:04 -06:00
Benjamin Herrenschmidt
d767efe30f [POWERPC] cell: Add Cell memory controller register defs and expose it
This adds definitions for the Cell memory controller registers (at
least some of them) for use by the EDAC driver for ECC error reporting.

It also expose the said MIC as a platform device that can be used
by the EDAC driver to match on.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-09 21:01:56 +10:00
Benjamin Herrenschmidt
eef686a009 [POWERPC] cell: Move cbe_regs.h to include/asm-powerpc/cell-regs.h
The new Cell EDAC driver needs that file, oprofile also does ugly
path tricks to get to it, it's time to move it to asm-powerpc. While
at it, rename it to be consistent with cell-pmu.h (and dashes look
nicer than underscores anyway).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-09 21:01:56 +10:00
Anton Vorontsov
cccd21027c [POWERPC] QEIC: Implement pluggable handlers, fix MPIC cascading
set_irq_chained_handler overwrites MPIC's handle_irq function
(handle_fasteoi_irq) thus MPIC never gets eoi event from the
cascaded IRQ. This situation hangs MPIC on MPC8568E.

To solve this problem efficiently, QEIC needs pluggable handlers,
specific to the underlaying interrupt controller.

Patch extends qe_ic_init() function to accept low and high interrupt
handlers. To avoid #ifdefs, stack of interrupt handlers specified in
the header file and functions are marked 'static inline', thus
handlers are compiled-in only if actually used (in the board file).
Another option would be to lookup for parent controller and
automatically detect handlers (will waste text size because of
never used handlers, so this option abolished).

qe_ic_init() also changed in regard to support multiplexed high/low
lines as found in MPC8568E-MDS, plus qe_ic_cascade_muxed_mpic()
handler implemented appropriately.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08 08:38:57 -05:00
Timur Tabi
090fe850f9 [POWERPC] 86xx: update immap_86xx.h for the 8610
Update the definition of the global utilities structure (ccsr_guts) in
immap_86xx.h and add some related macros for the Freescale 8610 SOC.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08 08:38:50 -05:00
Timur Tabi
6b0b594bb8 [POWERPC] qe: miscellaneous code improvements and fixes to the QE library
This patch makes numerous miscellaneous code improvements to the QE library.

1. Remove struct ucc_common and merge ucc_init_guemr() into ucc_set_type()
   (every caller of ucc_init_guemr() also calls ucc_set_type()).  Modify all
   callers of ucc_set_type() accordingly.

2. Remove the unused enum ucc_pram_initial_offset.

3. Refactor qe_setbrg(), also implement work-around for errata QE_General4.

4. Several printk() calls were missing the terminating \n.

5. Add __iomem where needed, and change u16 to __be16 and u32 to __be32 where
   appropriate.

6. In ucc_slow_init() the RBASE and TBASE registers in the PRAM were programmed
   with the wrong value.

7. Add the protocol type to struct us_info and updated ucc_slow_init() to
   use it, instead of always programming QE_CR_PROTOCOL_UNSPECIFIED.

8. Rename ucc_slow_restart_x() to ucc_slow_restart_tx()

9. Add several macros in qe.h (mostly for slow UCC support, but also to
   standardize some naming convention) and remove several unused macros.

10. Update ucc_geth.c to use the new macros.

11. Add ucc_slow_info.protocol to specify which QE_CR_PROTOCOL_xxx protcol
    to use when initializing the UCC in ucc_slow_init().

12. Rename ucc_slow_pram.rfcr to rbmr and ucc_slow_pram.tfcr to tbmr, since
    these are the real names of the registers.

13. Use the setbits, clrbits, and clrsetbits where appropriate.

14. Refactor ucc_set_qe_mux_rxtx().

15. Remove all instances of 'volatile'.

16. Simplify get_cmxucr_reg();

17. Replace qe_mux.cmxucrX with qe_mux.cmxucr[].

18. Updated struct ucc_geth because struct ucc_fast is not padded any more.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-08 08:38:15 -05:00
Scott Wood
15f8c604a7 [POWERPC] cpm: Describe multi-user ram in its own device node.
The way the current CPM binding describes available multi-user (a.k.a.
dual-ported) RAM doesn't work well when there are multiple free regions,
and it doesn't work at all if the region doesn't begin at the start of
the muram area (as the hardware needs to be programmed with offsets into
this area).  The latter situation can happen with SMC UARTs on CPM2, as its
parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't
support moving it.

It is now described with a muram node, similar to QE.  The current CPM
binding is sufficiently recent (i.e. never appeared in an official release)
that compatibility with existing device trees is not an issue.

The code supporting the new binding is shared between cpm1 and cpm2, rather
than remain separated.  QE should be able to use this code as well, once
minor fixes are made to its device trees.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 15:47:05 -05:00
Emil Medve
b6927bca24 [POWERPC] QE: Added missing CEURNR register
According to the publicly available MPC8360E RM (rev. 1 from 09/2006 and rev. 2
from 05/2007) and MPC8323E RM (rev. 1 from 09/2006), CEURNR is the QE microcode
revision number register and is located at offset 0x1b8 within the QE internal
register space

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:03:03 -05:00
Scott Wood
11af1192b7 [POWERPC] mpc82xx: Define CPU_FTR_NEED_COHERENT
The 8272 (and presumably other PCI PQ2 chips) appear to have the
same issue as the 83xx regarding PCI streaming DMA.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:21 -05:00
Scott Wood
7f21f52940 [POWERPC] cpm2: Add cpm2_set_pin().
This provides a generic way for board code to set up CPM pins, rather
than directly poking magic values into registers.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:18 -05:00
Scott Wood
2652d4ec4a [POWERPC] cpm2: Add SCCs to cpm2_clk_setup(), and cpm2_smc_clk_setup().
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:14 -05:00
Scott Wood
449012daa9 [POWERPC] cpm2: Infrastructure code cleanup.
Mostly sparse fixes (__iomem annotations, etc); also, cpm2_immr
is used rather than creating many temporary mappings.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 11:02:04 -05:00
Scott Wood
663edbd264 [POWERPC] 8xx: Add pin and clock setting functions.
These let board code set up pins and clocks without having to
put magic numbers directly into the registers.

The clock function is mostly duplicated from the cpm2 version;
hopefully this stuff can be merged at some point.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:36:36 -05:00
Scott Wood
fb533d0c5a [POWERPC] 8xx: Infrastructure code cleanup.
1. Keep a global mpc8xx_immr mapping, rather than constantly
creating temporary mappings.
2. Look for new fsl,cpm1 and fsl,cpm1-pic names.
3. Always reset the CPM when not using the udbg console;
this is required in case the firmware initialized a device
that is incompatible with one that the kernel is about to
use.
4. Remove some superfluous casts and header includes.
5. Change a usage of IMAP_ADDR to get_immrbase().
6. Use phys_addr_t, not uint, for dpram_pbase.
7. Various sparse-related fixes, such as __iomem annotations.
8. Remove mpc8xx_show_cpuinfo, which doesn't provide anything
useful beyond the generic cpuinfo handler.
9. Move prototypes for 8xx support functions from board files
to sysdev/commproc.h.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:36:35 -05:00
Scott Wood
c374e00e17 [POWERPC] Add early debug console for CPM serial ports.
This code assumes that the ports have been previously set up, with
buffers in DPRAM.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:35:43 -05:00
Grant Likely
4dc9783ea9 [POWERPC] Virtex: add xilinx interrupt controller driver
Adds support for the Xilinx opb-intc interrupt controller

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:14 -05:00
Tony Breeds
d831d0b83f [POWERPC] Implement clockevents driver for powerpc
This registers a clock event structure for the decrementer and turns
on CONFIG_GENERIC_CLOCKEVENTS, which means that we now don't need
most of timer_interrupt(), since the work is done in generic code.
For secondary CPUs, their decrementer clockevent is registered when
the CPU comes up (the generic code automatically removes the
clockevent when the CPU goes down).

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 15:44:34 +10:00
Ishizaki Kou
7f2c85777d [POWERPC] Celleb: New HTAB Guest OS Interface on Beat
This changes the Celleb code to work with new Guest OS Interface
to tweak HTAB on Beat. It detects old and new Guest OS Interfaces
automatically.

Signed-off-by: Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 13:25:28 +10:00
Michael Ellerman
0411a5e233 [POWERPC] Update mpic to use dcr_host_t.base
Now that dcr_host_t contains the base address, we can use that in the mpic
code, rather than storing it separately.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 13:25:27 +10:00
Michael Ellerman
0b94a1eeee [POWERPC] Store the base address in dcr_host_t
In its current form, dcr_map() doesn't remember the base address you passed
it, which means you need to store it somewhere else.  Rather than adding the
base to another struct it seems simpler to store it in the dcr_host_t.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 13:25:27 +10:00
Mathieu Desnoyers
d4243c175f [POWERPC] Include pagemap.h in asm/powerpc/tlb.h
Fixes this powerpc build error in 2.6.22-rc6-mm1 for powerpc 64 with
CONFIG_SWAP=n :

In file included from include2/asm/tlb.h:60,
                 from /home/compudj/git/linux-2.6-lttng/arch/powerpc/mm/init_64.
c:56:
/home/compudj/git/linux-2.6-lttng/include/asm-generic/tlb.h: In function 'tlb_flush_mmu':
/home/compudj/git/linux-2.6-lttng/include/asm-generic/tlb.h:76: error: implicit declaration of function 'release_pages'
/home/compudj/git/linux-2.6-lttng/include/asm-generic/tlb.h: In function 'tlb_remove_page':
/home/compudj/git/linux-2.6-lttng/include/asm-generic/tlb.h:105: error: implicit declaration of function 'page_cache_release'
make[2]: *** [arch/powerpc/mm/init_64.o] Error 1

release_pages is declared in linux/pagemap.h, but cannot be included in
linux/swap.h because of a sparc related comment:

/* only sparc can not include linux/pagemap.h in this file
 * so leave page_cache_release and release_pages undeclared... */
#define free_page_and_swap_cache(page) \
        page_cache_release(page)
#define free_pages_and_swap_cache(pages, nr) \
        release_pages((pages), (nr), 0);

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 12:02:43 +10:00
Hugh Dickins
048c8bc90e [POWERPC] ppc64: support CONFIG_DEBUG_PREEMPT
Add CONFIG_DEBUG_PREEMPT support to ppc64: it was useful for testing
get_paca() preemption.  Cheat a little, just use debug_smp_processor_id()
in the debug version of get_paca(): it contains all the right checks and
reporting, though get_paca() doesn't really use smp_processor_id().

Use local_paca for what might have been called __raw_get_paca().
Silence harmless warnings from io.h and lparcfg.c with local_paca -
it is okay for iseries_lparcfg_data to be referencing shared_proc
with preemption enabled: all cpus should show the same value for
shared_proc.

Why do other architectures need TRACE_IRQFLAGS_SUPPORT for DEBUG_PREEMPT?
I don't know, ppc64 appears to get along fine without it.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 11:48:44 +10:00
Stephen Rothwell
5669c3cf19 [POWERPC] Limit range of __init_ref_ok somewhat
This patch introduces zalloc_maybe_bootmem and uses it so that we don't
have to mark a whole (largish) routine as __init_ref_ok.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 11:48:44 +10:00
Stephen Rothwell
6fccab26df [POWERPC] Make vio_bus_type static
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 11:48:43 +10:00
Domen Puncer
6f6682809b [POWERPC] clk.h interface for platforms
This provides an implementation of the <linux/clk.h> interface for
arch/powerpc using a set of function pointers in clk_functions.
Platforms that want to support this interface should fill
clk_functions and select CONFIG_PPC_CLOCK in Kconfig.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03 09:11:56 +10:00
Robert P. J. Day
20b31b53ea [POWERPC] Prevent direct inclusion of <asm/rwsem.h>.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22 14:49:21 +10:00
Mike Frysinger
fc624eae32 [POWERPC] Use __attribute__ in asm-powerpc
Pretty much everyone uses "__attribute__" or "attribute", no one uses
"__attribute".  This tweaks the three places in asm-powerpc where this
comes up.  While only asm-powerpc/types.h is interesting (for
userspace), I did asm-powerpc/processor.h as well for consistency.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22 14:49:21 +10:00
Paul Mackerras
0ce49a3945 Merge branch 'linux-2.6' 2007-09-20 10:09:27 +10:00
Benjamin Herrenschmidt
c27da33969 [POWERPC] Fix timekeeping on PowerPC 601
Recent changes to the timekeeping code broke support for the PowerPC 601
processor which doesn't have the usual timebase facility but a slightly
different thing called (yuck) the RTC.

This fixes it, boot tested on an old 601 based PowerMac 7200.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:26:34 +10:00
Stephen Rothwell
ee7a76da1e [POWERPC] Size swapper_pg_dir correctly
David Gibson pointed out that swapper_pg_dir actually need to be
PGD_TABLE_SIZE bytes long not PAGE_SIZE.  This actually saves 64k in
the bss for a kernel ppc64_defconfig built with CONFIG_PPC_64K_PAGES.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Stephen Rothwell
7b2c3c5b1d [POWERPC] Fix section mismatch in PCI code
Create a helper function (alloc_maybe_bootmem) that is marked __init_refok
to limit the chances of mistakenly referring to other __init routines.

WARNING: vmlinux.o(.text+0x2a9c4): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.update_dn_pci_info' and '.pci_dn_reconfig_notifier')
WARNING: vmlinux.o(.text+0x36430): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.mpic_msi_init_allocator' and '.find_ht_magic_addr')
WARNING: vmlinux.o(.text+0x5e804): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config')
WARNING: vmlinux.o(.text+0x5e8e8): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config')
WARNING: vmlinux.o(.text+0x5e968): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Domen Puncer
ee983079ce [POWERPC] MPC5200 low power mode
Low-power mode implementation for Lite5200b.
Some I/O registers are also saved here.

A recent U-Boot that supports this (lite5200b_PM_config) is needed.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:25:34 +10:00
Michael Ellerman
7af1443a9d [POWERPC] spufs: Handle errors in SPU coredump code, and support coredump to a pipe
Rework spufs_coredump_extra_notes_write() to check for and return errors.

If we're coredumping to a pipe we can't trust file->f_pos, we need to
maintain the foffset value passed to us. The cleanest way to do this is
to have the low level write routine increment foffset when we've
successfully written.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Michael Ellerman
e55014923e [POWERPC] spufs: Cleanup ELF coredump extra notes logic
To start with, arch_notes_size() etc. is a little too ambiguous a name for
my liking, so change the function names to be more explicit.

Calling through macros is ugly, especially with hidden parameters, so don't
do that, call the routines directly.

Use ARCH_HAVE_EXTRA_ELF_NOTES as the only flag, and based on it decide
whether we want the extern declarations or the empty versions.

Since we have empty routines, actually use them in the coredump code to
save a few #ifdefs.

We want to change the handling of foffset so that the write routine updates
foffset as it goes, instead of using file->f_pos (so that writing to a pipe
works).  So pass foffset to the write routine, and for now just set it to
file->f_pos at the end of writing.

It should also be possible for the write routine to fail, so change it to
return int and treat a non-zero return as failure.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Michael Ellerman
48cad41f7e [POWERPC] spufs: Combine spufs_coredump_calls with spufs_calls
Because spufs might be built as a module, we can't have other parts of the
kernel calling directly into it, we need stub routines that check first if the
module is loaded.

Currently we have two structures which hold callbacks for these stubs, the
syscalls are in spufs_calls and the coredump calls are in spufs_coredump_calls.
In both cases the logic for registering/unregistering is essentially the same,
so we can simplify things by combining the two.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:19 +10:00
Jeremy Kerr
4ec3c3d08d [POWERPC] spufs: Remove asmlinkage from spufs_calls
spu_create and spu_run are wrapped by the cell syscall layer, so
we don't need the asmlinkage.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:17 +10:00
Jeremy Kerr
98f06978ff [POWERPC] cell: Unify spufs syscall path
At present, a built-in spufs will not use the spufs_calls callbacks, but
directly call sys_spu_create.  This saves us an indirect branch, but
means we have duplicated functions - one for CONFIG_SPU_FS=y and one for
=m.

This change unifies the spufs syscall path, and provides access to the
spufs_calls structure through a get/put pair.  At present, the only user
of the spufs_calls structure is spu_syscalls.c, but this will facilitate
adding the coredump calls later.

Everyone likes numbers, right?  Here's a before/after comparison with
CONFIG_SPU_FS=y, doing spu_create(); close(); 64k times.

Before:
	[jk@cell ~]$ time ./spu_create
	performing 65536 spu_create calls

	real    0m24.075s
	user    0m0.146s
	sys     0m23.925s

After:
	[jk@cell ~]$ time ./spu_create
	performing 65536 spu_create calls

	real    0m24.777s
	user    0m0.141s
	sys     0m24.631s

So, we're adding around 11us per syscall, at the benefit of having
only one syscall path.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 15:12:16 +10:00
Adrian Bunk
e6b6e3ffb9 [POWERPC] Remove APUS support from arch/ppc
Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years

This therefore removes the remaining parts of APUS support from
arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-17 15:15:04 +10:00
Timur Tabi
82925e76db [POWERPC] 86xx: Fix definition of global-utilites structure
The current definition of struct ccsr_guts in immap_86xx.h was for 85xx.
This patch fixes that and replaces the vague integer types with sized types
of the correct endianness.  The unused struct ccsr_pci is also deleted.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:54:00 -05:00
Timur Tabi
dc967d7f5e [POWERPC] add clrsetbits macros
This patch adds the clrsetbits_xxx() macros, which are used to set and clear
multiple bits in a single read-modify-write operation.  Specify the bits to
clear in the 'clear' parameter and the bits to set in the 'set' parameter.
These macros can also be used to set a multiple-bit bit pattern using a mask,
by specifying the mask in the 'clear' parameter and the new bit pattern in the
'set' parameter.  There are big-endian and little-endian versions for 8, 16,
32, and 64 bits.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:56 -05:00
Anton Vorontsov
364f8ffc18 [POWERPC] QE: extern par_io_config_pin and par_io_data_set funcs
This is needed to configure and control QE pario pins from the kernel.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:49 -05:00
Kumar Gala
748a768384 [POWERPC] Fix modpost warnings from head*.S on ppc32
We get warnings like the following from the various ppc32 head*.S files:

WARNING: vmlinux.o(.text+0x358): Section mismatch: reference to .init.text:early_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x380): Section mismatch: reference to .init.text:machine_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x384): Section mismatch: reference to .init.text:MMU_init (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3aa): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')
WARNING: vmlinux.o(.text+0x3ae): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base')

Added a .text.head section simliar to what other architectures do since
modpost already excludes this from its warnings.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:36 -05:00
Kumar Gala
5e14d21e3f [POWERPC] Add cpu feature for SPE handling
Make it so that SPE support can be determined at runtime.  This is similiar
to how we handle AltiVec.  This allows us to have SPE support built in and
work on processors with and without SPE.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:53:30 -05:00
Geert Uytterhoeven
06462d9263 [POWERPC] PS3: Add new LV1 error codes
Add new error codes that may be returned by the LV1 hypervisor

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:25 +10:00
Olof Johansson
0d72ba930c [POWERPC] Add workaround for MPICs with broken register reads
Some versions of PWRficient 1682M have an interrupt controller in which
the first register in each pair for interrupt sources doesn't always
read with the right polarity/sense values.

To work around this, keep a software copy of the register instead.  Since
it's not modified from the mpic itself, it's a feasible solution.  Still,
keep it under a config option to avoid wasting memory on other platforms.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:25 +10:00
Olof Johansson
a416561bf7 [POWERPC] Move lowlevel runlatch calls under cpu feature control
There's no need to call the runlatch on functions on processors that
don't implement them (CPU_FTR_CTRL).

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:22 +10:00
Olof Johansson
2e1957fd47 [POWERPC] pasemi: Export more SPRs to sysfs when CONFIG_DEBUG_KERNEL=y
Export some of the implementation-specific registers via sysfs.
Useful when debugging, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:21 +10:00
Michael Ellerman
52964f87c6 [POWERPC] Add an optional device_node pointer to the irq_host
The majority of irq_host implementations (3 out of 4) are associated
with a device_node, and need to stash it somewhere. Rather than having
it somewhere different for each host, add an optional device_node pointer
to the irq_host structure.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-14 01:33:20 +10:00
Paul Mackerras
b2315372ea Merge branch 'linux-2.6' into for-2.6.24 2007-09-14 01:24:25 +10:00
Masato Noguchi
b7f90a406f [POWERPC] cell/PS3: Fix a bug that causes the PS3 to hang on the SPU Class 0 interrupt.
The Cell BE Architecture spec states that the SPU MFC Class 0 interrupt
is edge-triggered.  The current spu interrupt handler assumes this
behavior and does not clear the interrupt status.

The PS3 hypervisor visualizes all SPU interrupts as level, and on return
from the interrupt handler the hypervisor will deliver a new virtual
interrupt for any unmasked interrupts which for which the status has not
been cleared.  This fix clears the interrupt status in the interrupt
handler.

Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-11 04:30:36 +10:00
Paul Mackerras
35438c4327 Merge branch 'linux-2.6' into for-2.6.24 2007-08-28 15:56:11 +10:00
Kumar Gala
33d71d26ba [POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need
To build arch/powerpc without including asm-ppc/ we need these files
in asm-powerpc/

Moved some headers under arch/powerpc/platforms if they were only used by
platform or driver files and fixed up the source file includes to match
the new locations

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:43:29 -05:00
Stephen Rothwell
7180e3e636 [POWERPC] Split out iSeries specific exception macros
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 16:48:35 +10:00
Stephen Rothwell
f9ff0f3048 [POWERPC] Move the exception macros into a header file
It makes head_64.S a bit more readable and will allow us to move the
iSeries exceptions elsewhere.

This also removes the last line of the comment:

 * The following macros define the code that appears as
 * the prologue to each of the exception handlers.  They
 * are split into two parts to allow a single kernel binary
 * to be used for pSeries and iSeries.
 * LOL.  One day... - paulus

Anything is possible. :-)

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 16:48:35 +10:00
Stephen Rothwell
fc68e8699f [POWERPC] Move iSeries startup code out of head_64.S
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 16:48:34 +10:00
Scott Wood
804ace8881 [POWERPC] Use strcasecmp() rather than strncasecmp() when determining device node compatibility
The current code assumes "foo-bar" must always be compatible with a node
compatible with "foo", which breaks device trees where this is not so.

The "case" part is also wrong according to Open Firmware, but it's more
likely to have drivers and/or device trees depending on it, and thus
needs to be handled more carefully.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:47 +10:00
Scott Wood
12cdac34c6 [POWERPC] Add clrbits8 and setbits8
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:47 +10:00
Stephen Rothwell
16a15a30f8 [POWERPC] iSeries: Clean up lparmap mess
We need to have xLparMap in head_64.S so that it is at a fixed address
(because the linker will not resolve (address & 0xffffffff) for us).
But the assembler miscalculates the KERNEL_VSID() expressions.  So put
the confusing expressions into asm-offsets.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:21:46 +10:00
Josh Boyer
aab69292e4 [POWERPC] 40x decrementer fixes
Allow generic_calibrate_decr to work for 40x platforms.  Given that the hardware
behavior is identical, this also changes the set_dec function to reload the PIT
on 40x to match the behavior 44x currently has.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-08-20 07:29:11 -05:00
Josh Boyer
4d922c8dc3 [POWERPC] 40x MMU
Add MMU definitions for 40x platforms.  Also fixes two warnings in 40x_mmu.c.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
2007-08-20 07:28:48 -05:00
Becky Bruce
86d7a9a9c4 [POWERPC] Fix FSL BookE machine check reporting
Reserved MCSR bits on FSL BookE parts may have spurious values
when mcheck occurs.  Mask these off when printing the MCSR to
avoid confusion.  Also, get rid of the MCSR_GL_CI bit defined
for e500 - this bit doesn't actually have any meaning.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-17 13:22:28 -05:00
Stephen Rothwell
e8ff0646e5 [POWERPC] Tidy up CONFIG_PPC_MM_SLICES code
This removes some of the #ifdefs from .c files.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:59 +10:00
Stephen Rothwell
0b8188a44d [POWERPC] Remove get_property and device_is_compatible
They were only needed for backwards compatibility and all in tree uses
have now been changed.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:58 +10:00
Becky Bruce
1ac9f1f71d [POWERPC] Update lmb.h include protection to ASM_POWERPC
This file was protected by _PPC64_LMB_H, which is confusing, as the
32-bit code also uses the lmb these days.  Changed to
_ASM_POWERPC_LMB_H.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:58 +10:00
Segher Boessenkool
9f0cbea0d8 [POWERPC] Implement atomic{, 64}_{read, write}() without volatile
Instead, use asm() like all other atomic operations already do.

Also use inline functions instead of macros; this actually
improves code generation (some code becomes a little smaller,
probably because of improved alias information -- just a few
hundred bytes total on a default kernel build, nothing shocking).

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:58 +10:00
Linas Vepstas
0f2342c85d [POWERPC] pseries: Eliminate global error_log_cnt variable
Eliminate the use of error_log_cnt as a global var shared across
different directories.  Pass it as a parameter instead.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>

----

Respin of earlier patch, with the CONFIG_PSERIES junk removed from the
header file.

 arch/powerpc/kernel/nvram_64.c         |   10 +++++-----
 arch/powerpc/platforms/pseries/rtasd.c |    7 ++++---
 include/asm-powerpc/nvram.h            |    6 ++++--
 3 files changed, 13 insertions(+), 10 deletions(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:52 +10:00
Segher Boessenkool
f774216d46 [POWERPC] Replace a few #defines with empty inline functions
...so that GCC doesn't complain about unused variables in the
callers of these.

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:01:51 +10:00
Benjamin Herrenschmidt
8f2ea1fd3f [POWERPC] Fix initialization and usage of dma_mask
powerpc has a couple of bugs in the usage of dma_masks that tend to
break when drivers explicitly try to set a 32-bit mask for example.

First, the code that generates the pci devices from the OF device-tree
doesn't initialize the mask properly, then our implementation of
set_dma_mask() was trying to validate the -previous- mask value, not the
one passed in as an argument.

This fixes these problems.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:42 +10:00
Andre Detsch
f5996449e3 [POWERPC] cell: Move SPU affinity init to spu_management_of_ops
This patch moves affinity initialization code from spu_base.c to a
new spu_management_of_ops function (init_affinity), which is empty
in the case of PS3. This fixes a linking problem that was happening
when compiling for PS3.
Also, some small code style changes were made.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-10 21:04:21 +10:00
Michael Neuling
67439b76f2 [POWERPC] Fixes for the SLB shadow buffer code
On a machine with hardware 64kB pages and a kernel configured for a
64kB base page size, we need to change the vmalloc segment from 64kB
pages to 4kB pages if some driver creates a non-cacheable mapping in
the vmalloc area.  However, we never updated with SLB shadow buffer.
This fixes it.  Thanks to paulus for finding this.

Also added some write barriers to ensure the shadow buffer contents
are always consistent.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-03 19:36:01 +10:00
Paul Mackerras
c0f7c6cb5d [POWERPC] Expand RPN field to 34 bits when using 64k pages
The real page number field in our PTEs when configured for 64kB pages
is currently 32 bits, which turns out to be not quite enough for the
resources that the eHCA driver wants to map.  This expands the RPN
field to include 2 adjacent, previously-unused bits.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2007-08-03 14:08:24 +10:00
Linus Torvalds
8d4fbcfbe0 Fix WARN_ON() on bitfield ops
Alexey Dobriyan noticed that the new WARN_ON() semantics that were
introduced by commit 684f978347 (to also
return the value to be warned on) didn't compile when given a bitfield,
because the typeof doesn't work for bitfields.

So instead of the typeof trick, use an "int" variable together with a
"!!(x)" expression, as suggested by Al Viro.

To make matters more interesting, Paul Mackerras points out that that is
sub-optimal on Power, but the old asm-coded comparison seems to be buggy
anyway on 32-bit Power if the conditional was 64-bit, so I think there
are more problems there.

Regardless, the new WARN_ON() semantics may have been a bad idea.  But
this at least avoids the more serious complications.

Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-07-31 21:12:07 -07:00
Stephane Eranian
a583f1b542 remove unused TIF_NOTIFY_RESUME flag
Remove unused TIF_NOTIFY_RESUME flag for all processor architectures.  The
flag was not used excecpt on IA-64 where the patch replaces it with
TIF_PERFMON_WORK.

Signed-off-by: stephane eranian <eranian@hpl.hp.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:38 -07:00
Linus Torvalds
9f5577d815 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (21 commits)
  [POWERPC] spusched: Fix initial timeslice calculation
  [POWERPC] spufs: Fix incorrect initialization of cbe_spu_info.spus
  [POWERPC] Fix Maple platform ISA bus
  [POWERPC] Make pci_iounmap actually unmap things
  [POWERPC] Add function to check if address is an IO port
  [POWERPC] Fix Pegasos keyboard detection
  [POWERPC] iSeries: Fix section mismatch warning in lpevents
  [POWERPC] iSeries: Fix section mismatch warnings
  [POWERPC] iSeries: We need vio_enable_interrupts
  [POWERPC] Fix RTC and device tree on linkstation machines
  [POWERPC] Add of_register_i2c_devices()
  [POWERPC] Fix loop with unsigned long counter variable
  [POWERPC] Fix register labels on show_regs() message for 4xx/Book-E
  [POWERPC] Only allow building of BootX text support on PPC_MULTIPLATFORM
  [POWERPC] Fix the ability to reset on MPC8544 DS and MPC8568 MDS boards
  [POWERPC] Fix mpc7448hpc2 tsi108 device_type bug
  [POWREPC] Fixup a number of modpost warnings on ppc32
  [POWERPC] Fix ethernet PHY support on MPC8544 DS
  [POWERPC] Don't try to allocate resources for a Freescale POWERPC PHB
  Revert "[POWERPC] Don't complain if size-cells == 0 in prom_parse()"
  ...
2007-07-26 14:00:09 -07:00
Sam Ravnborg
045e72acf1 fix 'dynreloc miscount' link error on Powerpc
Nathan Lynch <ntl@pobox.com> reported:
2.6.23-rc1 breaks the build for 64-bit powerpc for me (using
maple_defconfig):

  LD      vmlinux.o
powerpc64-unknown-linux-gnu-ld: dynreloc miscount for
kernel/built-in.o, section .opd
powerpc64-unknown-linux-gnu-ld: can not edit opd Bad value
make: *** [vmlinux.o] Error 1

However, I see a possibly related binutils patch:
http://article.gmane.org/gmane.comp.gnu.binutils/33650

It was tracked down to be caused by the weak prototype
declaration in mm.h:
__attribute__((weak)) const char *arch_vma_name(struct vm_area_struct *vma);

But there is no need to make the declaration weak - only the definition
needs to be marked weak.  So drop the weak declaration.  And in the process
drop the duplicate definition in page.h for powerpc.

Note: the arch_vma_name fix for x86_64 needs to be applied first to avoid
breaking x86_64

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Nathan Lynch <ntl@pobox.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:35:18 -07:00
Al Viro
97f1e7f7d2 make powerpc BUG_ON() OK with pointers and bitwise
Since powerpc insists on printing the _value_ of condition
and on casting it to long...  At least let's make it a force-cast.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26 11:11:57 -07:00
Benjamin Herrenschmidt
6dfbde2091 [POWERPC] Add function to check if address is an IO port
This adds a function that tells you if a given kernel virtual address
is hitting a PCI or ISA IO port permanent mapping or not. This is to
be used in the next patch to fix iomap APIs to properly unmap things.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:17:47 +10:00
Stephen Rothwell
c40b91b59d [POWERPC] iSeries: Fix section mismatch warnings
WARNING: vmlinux.o(.text+0x8124): Section mismatch: reference to .init.text:.iSeries_early_setup (between '.__start_initialization_iSeries' and '.__mmu_off')
WARNING: vmlinux.o(.text+0x8128): Section mismatch: reference to .init.text:.early_setup (between '.__start_initialization_iSeries' and '.__mmu_off')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:12:17 +10:00
Stephen Rothwell
56a4c6e31a [POWERPC] iSeries: We need vio_enable_interrupts
Commit 3d0e91f7ac introduced a requirement
for vio_enable_interrupts which iSeires has never needed.  So create a
dummy one.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-26 16:12:17 +10:00
Kumar Gala
f64fddbeac [POWERPC] Provide ability to setup P2P bridge registers from struct resource
We need the ability to set P2P bridge registers to properly setup the virtual
P2P bridges that exist in PCIe controllers for some of the embedded setups.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:30:08 -05:00
Kumar Gala
2e56ff206b [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime
Make it so we do a runtime check to know if we need to write cfg_addr
as big or little endian.  This is needed if we want to allow 86xx support
to co-exist in the same kernel as other 6xx PPCs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:29:09 -05:00
Kumar Gala
d5269966e5 [POWERPC] Removed setup_indirect_pci_nomap
We don't use setup_indirect_pci_nomap in arch/powerpc and it appears
the users that needed it from arch/ppc are now using setup_indirect_pci.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:08 -05:00
Kumar Gala
62c66c8e55 [POWERPC] Added indirect quirk to handle PCIe PHB that have issue w/no link
Added PPC_INDIRECT_TYPE_NO_PCIE_LINK flag to the indirect pci handling
code to ensure that we don't talk to any device other than the PHB
if we don't have PCIe link.  Some controllers will lockup if they try
to do a config cycle to any device on the bus except the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:07 -05:00
Kumar Gala
38805e5f09 [POWERPC] Add the ability to find PCI capabilities early on
Added early_find_capability that wraps pci_bus_find_capability and uses
fake_pci_bus() to allow us to call it before we've fully setup the
pci_controller.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:07 -05:00
Benjamin Herrenschmidt
7fd7218610 [POWERPC] MPIC protected sources
Some HW platforms, such as the new cell blades, requires some MPIC sources
to be left alone by the operating system. This implements support for
a "protected-sources" property in the mpic controller node containing a list
of source numbers to be protected against operating system interference.

For those interested in the gory details, the MPIC on the southbridge of
those blades has some of the processor outputs routed to the cell, and
at least one routed as a GPIO to the service processor. It will be used
in the GA product for routing some of the southbridge error interrupts
to the service processor which implements some of the RAS stuff, such
as checkstopping when fatal errors occurs before they can propagate.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-22 21:30:59 +10:00
Segher Boessenkool
34f329db54 [POWERPC] of_detach_node()'s device node argument cannot be const
...since it modifies it (when it sets the OF_DETACHED flag).

Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-22 21:30:59 +10:00
Christoph Hellwig
486acd4850 [CELL] spufs: rework list management and associated locking
This sorts out the various lists and related locks in the spu code.

In detail:

 - the per-node free_spus and active_list are gone.  Instead struct spu
   gained an alloc_state member telling whether the spu is free or not
 - the per-node spus array is now locked by a per-node mutex, which
   takes over from the global spu_lock and the per-node active_mutex
 - the spu_alloc* and spu_free function are gone as the state change is
   now done inline in the spufs code.  This allows some more sharing of
   code for the affinity vs normal case and more efficient locking
 - some little refactoring in the affinity code for this locking scheme

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20 21:42:28 +02:00
Bob Nelson
1474855d08 [CELL] oprofile: add support to OProfile for profiling CELL BE SPUs
From: Maynard Johnson <mpjohn@us.ibm.com>

This patch updates the existing arch/powerpc/oprofile/op_model_cell.c
to add in the SPU profiling capabilities.  In addition, a 'cell' subdirectory
was added to arch/powerpc/oprofile to hold Cell-specific SPU profiling code.
Exports spu_set_profile_private_kref and spu_get_profile_private_kref which
are used by OProfile to store private profile information in spufs data
structures.

Also incorporated several fixes from other patches (rrn).  Check pointer
returned from kzalloc.  Eliminated unnecessary cast.  Better error
handling and cleanup in the related area.  64-bit unsigned long parameter
was being demoted to 32-bit unsigned int and eventually promoted back to
unsigned long.

Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Bob Nelson <rrnelson@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
2007-07-20 21:42:24 +02:00
Arnd Bergmann
8e68e2f248 [CELL] spufs: extension of spu_create to support affinity definition
This patch adds support for additional flags at spu_create, which relate
to the establishment of affinity between contexts and contexts to memory.
A fourth, optional, parameter is supported. This parameter represent
a affinity neighbor of the context being created, and is used when defining
SPU-SPU affinity.
Affinity is represented as a doubly linked list of spu_contexts.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20 21:42:15 +02:00
Arnd Bergmann
9d92af621f [CELL] cell: add vicinity information on spus
This patch adds affinity data to each spu instance.
A doubly linked list is created, meant to connect the spus
in the physical order they are placed in the BE. SPUs
near to memory should be marked as having memory affinity.
Adjustments of the fields acording to FW properties is done
in separate patches, one for CPBW, one for Malta (patch for
Malta under testing).

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20 21:42:12 +02:00
Arnd Bergmann
aa6d5b2025 [CELL] cell: add per BE structure with info about its SPUs
Addition of a spufs-global "cbe_info" array. Each entry contains information
about one Cell/B.E. node, namelly:
* list of spus (both free and busy spus are in this list);
* list of free spus (replacing the static spu_list from spu_base.c)
* number of spus;
* number of reserved (non scheduleable) spus.

SPE affinity implementation actually requires only access to one spu per
BE node (since it implements its own pointer to walk through the other spus
of the ring) and the number of scheduleable spus (n_spus - non_sched_spus)
However having this more general structure can be useful for other
functionalities, concentrating per-cbe statistics / data.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20 21:42:11 +02:00
Masato Noguchi
1cfc0f86eb [CELL] spufs: fix decr_status meanings
The decr_status in the LSCSA is confusedly used as two meanings:
 * SPU decrementer was running
 * SPU decrementer was wrapped as a result of adjust
and the code to set decr_status is missing.

This patch fixes these problems by using the decr_status argument as a
set of flags. This requires a rebuild of the shipped spu_restore code.

Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20 21:41:55 +02:00
Andre Detsch
27ec41d3a1 [CELL] spufs: add spu stats in sysfs and ctx stat file in spufs
This patch exports per-context statistics in spufs as long as spu
statistics in sysfs.

It was formed by merging:
"spufs: add spu stats in sysfs"   From: Christoph Hellwig
"spufs: add stat file to spufs"   From: Christoph Hellwig
"spufs: fix libassist accounting" From: Jeremy Kerr
"spusched: fix spu utilization statistics" From: Luke Browning
And some adjustments by myself, after suggestions on cbe-oss-dev.

Having separate patches was making the review process harder
than it should, as we end up integrating spus and ctx statistics
accounting much more than it was on the first implementation.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20 21:41:50 +02:00
Kazunori Asayama
49776d30ae [CELL] spufs: Avoid unexpectedly restaring MFC during context save
The current SPU context saving procedure in SPUFS unexpectedly
restarts MFC when halting decrementer, because MFC_CNTL[Dh] is set
without MFC_CNTL[Sm]. This bug causes, for example, saving broken DMA
queues. Here is a patch to fix the problem.

Signed-off-by: Kazunori Asayama <asayama@sm.sony.co.jp>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20 21:41:47 +02:00
Andre Detsch
8d2655e621 [CELL] saving spus information for kexec crash
This patch adds support for investigating spus information after a
kernel crash event, through kdump vmcore file.
Implementation is based on xmon code, but the new functionality was
kept independent from xmon.

Signed-off-by: Lucio Jose Herculano Correia <luciojhc@br.ibm.com>
Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20 21:41:43 +02:00
Christian Krafft
813f90728e [CELL] pmi: remove support for mutiple devices.
The pmi driver got simplified by removing support for multiple devices.
As there is no more than one pmi device per maschine, there is no need to
specify the device for listening and sending messages.

This way the caller (cbe_cpufreq) doesn't need to scan the device tree.
When registering the handler on a board without a pmi
interface, pmi.c will just return -ENODEV.

The patch that fixed the breakage of cell_defconfig has been
broken out of the earlier version of this patch. So this is
the version that applies cleanly on top of it.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-07-20 21:41:34 +02:00
Stephen Rothwell
b41912ca34 Create linux/of_platorm.h
Move common stuff from asm-powerpc/of_platform.h to here and
move the common bits from asm-sparc*/of_device.h here as well.

Create asm-sparc*/of_platform.h and move appropriate parts of
of_device.h to them.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 14:25:22 +10:00
Stephen Rothwell
f898f8dbce Begin consolidation of of_device.h
This just moves the common stuff from the arch of_device.h files to
linux/of_device.h.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:41:56 +10:00
Stephen Rothwell
1ef4d4242d Consolidate of_find_node_by routines
This consolidates the routines of_find_node_by_path, of_find_node_by_name,
of_find_node_by_type and of_find_compatible_device.  Again, the comparison
of strings are done differently by Sparc and PowerPC and also these add
read_locks around the iterations.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:39:06 +10:00
Stephen Rothwell
581b605a83 Consolidate of_find_property
The only change here is that a readlock is taken while the property list
is being traversed on Sparc where it was not taken previously.

Also, Sparc uses strcasecmp to compare property names while PowerPC
uses strcmp.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:32:24 +10:00
Stephen Rothwell
0081cbc373 Consolidate of_device_is_compatible
The only difference here is that Sparc uses strncmp to match compatibility
names while PowerPC uses strncasecmp.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:29:51 +10:00
Stephen Rothwell
97e873e5c8 Start split out of common open firmware code
This creates drivers/of/base.c (depending on CONFIG_OF) and puts
the first trivially common bits from the prom.c files into it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:28:41 +10:00
Stephen Rothwell
76c1ce7870 Split out common parts of prom.h
This creates linux/of.h and includes asm/prom.h from it.

We also include linux/of.h from asm/prom.h while we transition.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:10:22 +10:00
Ralf Baechle
c41917df8a [PATCH] sched: sched_cacheflush is now unused
Since Ingo's recent scheduler rewrite which was merged as commit
0437e109e1 sched_cacheflush is unused.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-19 21:28:35 +02:00
Peter Zijlstra
b111757c50 arch: personality independent stack top
New arch macro STACK_TOP_MAX it gives the larges valid stack address for the
architecture in question.

It differs from STACK_TOP in that it will not distinguish between
personalities but will always return the largest possible address.

This is used to create the initial stack on execve, which we will move down to
the proper location once the binfmt code has figured out where that is.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ollie Wild <aaw@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:45 -07:00
Fenghua Yu
5fb7dc37dc define new percpu interface for shared data
per cpu data section contains two types of data.  One set which is
exclusively accessed by the local cpu and the other set which is per cpu,
but also shared by remote cpus.  In the current kernel, these two sets are
not clearely separated out.  This can potentially cause the same data
cacheline shared between the two sets of data, which will result in
unnecessary bouncing of the cacheline between cpus.

One way to fix the problem is to cacheline align the remotely accessed per
cpu data, both at the beginning and at the end.  Because of the padding at
both ends, this will likely cause some memory wastage and also the
interface to achieve this is not clean.

This patch:

Moves the remotely accessed per cpu data (which is currently marked
as ____cacheline_aligned_in_smp) into a different section, where all the data
elements are cacheline aligned. And as such, this differentiates the local
only data and remotely accessed data cleanly.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Michael Ellerman
9e367d8592 jprobes: remove JPROBE_ENTRY()
AFAICT now that jprobe.entry is a void *, JPROBE_ENTRY doesn't do anything
useful - so remove it ..

I've left a do-nothing version so that out-of-tree jprobes code will still
compile without modifications.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Amit Arora
97ac73506c sys_fallocate() implementation on i386, x86_64 and powerpc
fallocate() is a new system call being proposed here which will allow
applications to preallocate space to any file(s) in a file system.
Each file system implementation that wants to use this feature will need
to support an inode operation called ->fallocate().
Applications can use this feature to avoid fragmentation to certain
level and thus get faster access speed. With preallocation, applications
also get a guarantee of space for particular file(s) - even if later the
the system becomes full.

Currently, glibc provides an interface called posix_fallocate() which
can be used for similar cause. Though this has the advantage of working
on all file systems, but it is quite slow (since it writes zeroes to
each block that has to be preallocated). Without a doubt, file systems
can do this more efficiently within the kernel, by implementing
the proposed fallocate() system call. It is expected that
posix_fallocate() will be modified to call this new system call first
and incase the kernel/filesystem does not implement it, it should fall
back to the current implementation of writing zeroes to the new blocks.
ToDos:
1. Implementation on other architectures (other than i386, x86_64,
   and ppc). Patches for s390(x) and ia64 are already available from
   previous posts, but it was decided that they should be added later
   once fallocate is in the mainline. Hence not including those patches
   in this take.
2. Changes to glibc,
   a) to support fallocate() system call
   b) to make posix_fallocate() and posix_fallocate64() call fallocate()

Signed-off-by: Amit Arora <aarora@in.ibm.com>
2007-07-17 21:42:44 -04:00
Antonino A. Daplas
317b3c2167 fbdev: detect primary display device
Add function helper, fb_is_primary_device().  Given struct fb_info, it will
return a nonzero value if the device is the primary display.

Currently, only the i386 is supported where the function checks for the
IORESOURCE_ROM_SHADOW flag.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:11 -07:00
Antonino A. Daplas
10eb2659cc fbdev: move arch-specific bits to their respective subdirectories
Move arch-specific bits of fb_mmap() to their respective subdirectories

[bob.picco@hp.com: efi_range_is_wc is referenced but not declared]
[bunk@stusta.de: fix include/asm-m68k/fb.h]
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:11 -07:00
Tejun Heo
9281acea6a kallsyms: make KSYM_NAME_LEN include space for trailing '\0'
KSYM_NAME_LEN is peculiar in that it does not include the space for the
trailing '\0', forcing all users to use KSYM_NAME_LEN + 1 when allocating
buffer.  This is nonsense and error-prone.  Moreover, when the caller
forgets that it's very likely to subtly bite back by corrupting the stack
because the last position of the buffer is always cleared to zero.

This patch increments KSYM_NAME_LEN by one and updates code accordingly.

* off-by-one bug in asm-powerpc/kprobes.h::kprobe_lookup_name() macro
  is fixed.

* Where MODULE_NAME_LEN and KSYM_NAME_LEN were used together,
  MODULE_NAME_LEN was treated as if it didn't include space for the
  trailing '\0'.  Fix it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Paulo Marques <pmarques@grupopie.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:03 -07:00
Martin Schwidefsky
e21ea246bc mm: remove ptep_test_and_clear_dirty and ptep_clear_flush_dirty
Nobody is using ptep_test_and_clear_dirty and ptep_clear_flush_dirty.  Remove
the functions from all architectures.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:22:59 -07:00
Linus Torvalds
489de30259 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (209 commits)
  [POWERPC] Create add_rtc() function to enable the RTC CMOS driver
  [POWERPC] Add H_ILLAN_ATTRIBUTES hcall number
  [POWERPC] xilinxfb: Parameterize xilinxfb platform device registration
  [POWERPC] Oprofile support for Power 5++
  [POWERPC] Enable arbitary speed tty ioctls and split input/output speed
  [POWERPC] Make drivers/char/hvc_console.c:khvcd() static
  [POWERPC] Remove dead code for preventing pread() and pwrite() calls
  [POWERPC] Remove unnecessary #undef printk from prom.c
  [POWERPC] Fix typo in Ebony default DTS
  [POWERPC] Check for NULL ppc_md.init_IRQ() before calling
  [POWERPC] Remove extra return statement
  [POWERPC] pasemi: Don't auto-select CONFIG_EMBEDDED
  [POWERPC] pasemi: Rename platform
  [POWERPC] arch/powerpc/kernel/sysfs.c: Move NUMA exports
  [POWERPC] Add __read_mostly support for powerpc
  [POWERPC] Modify sched_clock() to make CONFIG_PRINTK_TIME more sane
  [POWERPC] Create a dummy zImage if no valid platform has been selected
  [POWERPC] PS3: Bootwrapper support.
  [POWERPC] powermac i2c: Use mutex
  [POWERPC] Schedule removal of arch/ppc
  ...

Fixed up conflicts manually in:

	Documentation/feature-removal-schedule.txt
	arch/powerpc/kernel/pci_32.c
	arch/powerpc/kernel/pci_64.c
	include/asm-powerpc/pci.h

and asked the powerpc people to double-check the result..
2007-07-16 17:58:08 -07:00
Arnd Bergmann
4b7775870b Introduce compat_u64 and compat_s64 types
One common problem with 32 bit system call and ioctl emulation is the
different alignment rules between i386 and 64 bit machines.  A number of
drivers work around this by marking the compat structures as
'attribute((packed))', which is not the right solution because it breaks
all the non-x86 architectures that want to use the same compat code.

Hopefully, this patch improves the situation, it introduces two new types,
compat_u64 and compat_s64.  These are defined on all architectures to have
the same size and alignment as the 32 bit version of u64 and s64.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Vasily Tarasov <vtaras@openvz.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:48 -07:00
Jan Beulich
45e98cdb6d page table handling cleanup
Kill pte_rdprotect(), pte_exprotect(), pte_mkread(), pte_mkexec(), pte_read(),
pte_exec(), and pte_user() except where arch-specific code is making use of
them.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:36 -07:00
Jan Beulich
caa5171622 PCI: remove pci_dac_dma_... APIs
Based on replies to a respective query, remove the pci_dac_dma_...() APIs
(except for pci_dac_dma_supported() on Alpha, where this function is used
in non-DAC PCI DMA code).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Acked-by: David Miller <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:11 -07:00
Michael Ellerman
575e3348cb PCI: Use a weak symbol for the empty version of pcibios_add_platform_entries()
I'm not sure if this is going to fly, weak symbols work on the compilers I'm
using, but whether they work for all of the affected architectures I can't say.
I've cc'ed as many arch maintainers/lists as I could find.

But assuming they do, we can use a weak empty definition of
pcibios_add_platform_entries() to avoid having an empty definition on every
arch.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:07 -07:00
Paul Mackerras
bf22f6fe2d Merge branch 'for-2.6.23' into merge 2007-07-11 13:28:26 +10:00
Brian King
3c0c9e389b [POWERPC] Add H_ILLAN_ATTRIBUTES hcall number
Adds the number for the H_ILLAN_ATTRIBUTES hcall.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-11 13:24:40 +10:00
David Woodhouse
665f5600cb [POWERPC] Enable arbitary speed tty ioctls and split input/output speed
Adding the defines/macros activates the existing code in the tty layer and
allows this platform to use the arbitary speed ioctl setting layer

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 22:03:29 +10:00
Tony Breeds
bd67fcf9ba [POWERPC] Add __read_mostly support for powerpc
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 22:00:56 +10:00
Josh Boyer
b6f41cc830 [POWERPC] Consolidate PowerPC 750 cputable features
The 750 CPU_FTR macros have quite a bit of duplication in them.  Consolidate
them to use CPU_FTRS_750 and only list the unique features for derivatives.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 21:55:50 +10:00
will schmidt
078f194045 [POWERPC] Oprofile enhanced instruction sampling support
Oprofile enhanced instruction sampling support.

When performing instruction sampling, the mmcra[SLOT] field can be used to
more accurately identify the address of the sampled instruction.

Tested on power4, js20, power5 and power5+.

Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
cc: Maynard Johnson <maynardj@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 21:55:48 +10:00
Michael Ellerman
94a3807c2a [POWERPC] Make the debugfs "powerpc" dir globally accessible
The prom.c debugging code creates a "powerpc" directory in debugfs,
which is nice, but doesn't allow any other debugging code to stick things
under "powerpc" in debugfs. So make it global.

While we're there we should make the prom.c debugging code depend on
CONFIG_DEBUG_FS, because it doesn't work otherwise.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 21:53:50 +10:00
Michael Ellerman
6a281856c0 [POWERPC] Add a warning to help trackdown device_node refcounting bugs
When the refcount for a device node goes to 0, we call the
destructor - of_node_release(). This should only happen if we've
already detached the node from the device tree.

So add a flag OF_DETACHED which tracks detached-ness, and if we
find ourselves in of_node_release() without it set, issue a
warning and don't free the device_node. To avoid warning
continuously reinitialise the kref to a sane value.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 21:53:47 +10:00
Michael Ellerman
d3b814bb1e [POWERPC] Generalise device_node flag interface
The struct device_node currently has a _flags variable, although
it's only used for one flag - OF_DYNAMIC.  Generalise the flag
accessors so we can use them with other flags in future.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 21:53:46 +10:00
Vitaly Bordug
80128ff79d [POWERPC] 8xx: mpc885ads pcmcia support
Adds support for PowerQuicc on-chip PCMCIA.  The driver is implemented as
of_device, so only arch/powerpc stuff is capable to use it, which now implies
only mpc885ads reference board.

To cope with the code that should be hooked inside driver, but is really board
specific (like set_voltage), global structure mpc8xx_pcmcia_ops holds
necessary function pointers that are filled in the BSP code.

[akpm@linux-foundation.org: whitespace diddles]
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-10 00:33:51 -05:00