Commit Graph

127 Commits

Author SHA1 Message Date
Russell King
ddd559b13f Merge branch 'devel-stable' into devel
Conflicts:
	MAINTAINERS
	arch/arm/mm/fault.c
2009-09-12 12:02:26 +01:00
Russell King
98b0979f02 MMC: MMCI: convert realview MMC to use gpiolib
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-02 11:21:14 +01:00
Catalin Marinas
0e0fe9219d nommu: Do not allow REALVIEW_HIGH_PHYS_OFFSET if !MMU
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:35:05 +01:00
Catalin Marinas
5d57795e26 nommu: Add MMU-less support for the RealView boards
This patch defines the IO_ADDRESS macro for the !CONFIG_MMU case.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:34:57 +01:00
Catalin Marinas
dff2ab16ac Thumb-2: Pass a Thumb-2 address to the secondary CPUs to jump to
This patch sets bit 0 in the startup address passed to the secondary
CPUs so that they branch into Thumb-2 mode.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:33:00 +01:00
Russell King
64e8be6ebd ARM: Realview & Versatile: Fix i2c_board_info definitions
Fix i2c_board_info definitions - we were defining the 'type' field
of these structures twice since the first argument of I2C_BOARD_INFO
sets this field.  Move the second definition into I2C_BOARD_INFO().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
2009-07-18 17:08:59 +01:00
Russell King
7fb2bbf4d9 MMC: MMCI: allow GPIOs to be passed
Add and initialize the gpio_wp and gpio_cd members.  We need to
ensure that all users are covered, because GPIO 0 may be valid.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2009-07-09 15:15:12 +01:00
Russell King
eb7fffa39a [ARM] realview: add PL061 gpiolib support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-06 17:00:43 +01:00
Catalin Marinas
c3c2174031 [ARM] 5555/1: RealView: Include asm/smp_twd.h in realview-pbx.c
This header file is needed for twd_base.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-19 15:10:58 +01:00
Russell King
42578c82e0 Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/kernel/smp.c
	arch/arm/mach-realview/Makefile
	arch/arm/mach-realview/platsmp.c
2009-06-11 15:35:00 +01:00
Russell King
c7f7ff179c Merge branch 'smp' into devel 2009-06-01 18:35:26 +01:00
Russell King
a22f277bba [ARM] Kconfig: remove 'default n'
Kconfig entries default to n, so there's no need for this to be
explicitly specified.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-31 15:12:25 +01:00
Catalin Marinas
ee8c957119 RealView: Move the IRQ_* definitions out of the board-*.h files
The IRQ_* macros need to be made visible via the mach/irqs.h file but
without the additional macros defined in the board-*.h files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-05-30 14:00:17 +01:00
Catalin Marinas
da055eb52e RealView: Toggle one LED per CPU
If CONFIG_LEDS is enabled, it makes more sense to toggle one LED per CPU
in SMP systems rather than a single LED for all the CPUs.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-05-30 13:56:16 +01:00
Catalin Marinas
af607747de RealView: Allow access to the secure flash memory block on PB1176
This patch adds a Kconfig option for specifying whether Linux will only
be run in secure mode on the RealView PB1176 platform. Enabling it will
make the secure flash memory block (64MB @ 0x3c000000) available to
Linux.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-05-30 13:56:13 +01:00
Colin Tuckley
1b504bbe7a RealView: Add support for the RealView/PBX platform
This is a RealView platform supporting core tiles with ARM11MPCore,
Cortex-A8 or Cortex-A9 (multicore) processors. It has support for MMC,
CompactFlash, PCI-E.

Signed-off-by: Colin Tuckley <colin.tuckley@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-05-30 13:56:12 +01:00
Russell King
e03cdade0c [ARM] smp: use new cpumask functions
Convert cpu_*_mask bit twiddling to the new set_cpu_*() API.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-28 14:16:52 +01:00
Russell King
f32f4ce257 [ARM] smp: allow re-use of realview localtimer TWD support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17 19:16:41 +01:00
Russell King
a8cbcd92bd [ARM] smp: separate SCU support code from realview
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17 19:00:37 +01:00
Russell King
49613d4d9a [ARM] smp: SCU is used on non-realview platforms
The SCU can be used by non-realview platforms, so make it visible
for other people to use rather than having them copy the header file.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17 18:59:57 +01:00
Russell King
bc28248ee2 [ARM] smp: move core localtimer support out of platform specific files
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17 18:58:34 +01:00
Russell King
ee348d5a1d [ARM] realview: fix broadcast tick support
Having discussed broadcast tick support with Thomas Glexiner, the
broadcast tick devices should be registered with a higher rating
than the global tick device, and it should have the ONESHOT and
PERIODIC feature flags set.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Thomas Glexiner <tglx@linutronix.de>
2009-05-17 17:11:35 +01:00
Russell King
78d236c2b3 [ARM] realview: remove useless smp_cross_call_done()
smp_cross_call_done() is a no-op for MPCore, and since it's only
used by platform code, there's no point in having it unless it's
doing something.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17 16:23:45 +01:00
Russell King
826681043d [ARM] smp: fix cpumask usage in ARM SMP code
The ARM SMP code wasn't properly updated for the cpumask changes, which
results in smp_timer_broadcast() broadcasting ticks to non-online CPUs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17 16:22:46 +01:00
Magnus Damm
8e19608e8b clocksource: pass clocksource to read() callback
Pass clocksource pointer to the read() callback for clocksources.  This
allows us to share the callback between multiple instances.

[hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods]
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 13:41:47 -07:00
Russell King
cd02938a82 Merge branch 'smsc911x-armplatforms' of git://github.com/steveglen/linux-2.6 2009-04-02 23:22:11 +01:00
Steve Glendinning
c5142e84f3 arm: convert realview platform to use smsc911x
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
2009-04-02 18:22:50 +01:00
Santosh Shilimkar
9d681f3a1b [ARM] 5444/1: ARM: Realview: Fix event-device multiplicators in localtimer.c
Set the "mult" to finite value in the local_timer_setup in case
of CONFIG_LOCAL_TIMERS not enabled. Othewise this throws warning
in the boot log because of detect zero event-device multiplicators.
This can cause division-by-zero crashes.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-02 15:53:17 +01:00
Russell King
be093beb60 [ARM] pass reboot command line to arch_reset()
OMAP wishes to pass state to the boot loader upon reboot in order to
instruct it whether to wait for USB-based reflashing or not.  There is
already a facility to do this via the reboot() syscall, except we ignore
the string passed to machine_restart().

This patch fixes things to pass this string to arch_reset().  This means
that we keep the reboot mode limited to telling the kernel _how_ to
perform the reboot which should be independent of what we request the
boot loader to do.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-19 16:20:24 +00:00
Catalin Marinas
7db21712ae [ARM] 5397/1: RealView: Add support for the ISP1761 USB chip
This patch adds the platform_device and resource structures for the USB
ISP1761 chip, usable with the in-kernel isp1760 driver.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:30:27 +00:00
Catalin Marinas
6be62ba215 [ARM] 5396/1: RealView: Use PATA_PLATFORM to access the CompactFlash
This driver adds the platform_device definitions to allow the use of
CompactFlash on the RealView PB11MPCore and PB-A8 platforms. Note that
the CompactFlash controller is expected to be initialised by the Boot
Monitor and support the True IDE mode.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:30:26 +00:00
Catalin Marinas
533ad5e60c [ARM] 5395/1: RealView: Add support for the DS1338 RTC chip
This chip is on the I2C bus on the RealView and Versatile boards. The
patch adds the i2c_board_info definition for this device and registers
it with the I2C subsystem.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19 11:30:25 +00:00
Russell King
934848daa3 [ARM] Fix realview build
arch/arm/mach-realview/platsmp.c:140: error: 'jiffies' undeclared (first use in this function)
drivers/amba/bus.c:246: error: 'NO_IRQ' undeclared (first use in this function)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-08 16:29:41 +00:00
Kay Sievers
1d559e2913 arm: struct device - replace bus_id with dev_name(), dev_set_name()
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:43 -08:00
Linus Torvalds
b840d79631 Merge branch 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits)
  x86: export vector_used_by_percpu_irq
  x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and()
  sched: nominate preferred wakeup cpu, fix
  x86: fix lguest used_vectors breakage, -v2
  x86: fix warning in arch/x86/kernel/io_apic.c
  sched: fix warning in kernel/sched.c
  sched: move test_sd_parent() to an SMP section of sched.h
  sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0
  sched: activate active load balancing in new idle cpus
  sched: bias task wakeups to preferred semi-idle packages
  sched: nominate preferred wakeup cpu
  sched: favour lower logical cpu number for sched_mc balance
  sched: framework for sched_mc/smt_power_savings=N
  sched: convert BALANCE_FOR_xx_POWER to inline functions
  x86: use possible_cpus=NUM to extend the possible cpus allowed
  x86: fix cpu_mask_to_apicid_and to include cpu_online_mask
  x86: update io_apic.c to the new cpumask code
  x86: Introduce topology_core_cpumask()/topology_thread_cpumask()
  x86: xen: use smp_call_function_many()
  x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c
  ...

Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-02 11:44:09 -08:00
Rusty Russell
320ab2b0b1 cpumask: convert struct clock_event_device to cpumask pointers.
Impact: change calling convention of existing clock_event APIs

struct clock_event_timer's cpumask field gets changed to take pointer,
as does the ->broadcast function.

Another single-patch change.  For safety, we BUG_ON() in
clockevents_register_device() if it's not set.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2008-12-13 21:20:26 +10:30
Russell King
657e1de8e7 Merge branch 'for-rmk-realview' of git://linux-arm.org/linux-2.6 into devel 2008-12-01 17:53:45 +00:00
Catalin Marinas
6f13d27883 RealView: Select CPU_V6 for MACH_REALVIEW_PB11MP
This seems to be missing from the arm:devel branch, though the other
RealView configurations were modified accordingly.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01 14:55:00 +00:00
Catalin Marinas
0a5b2f6be7 RealView: Allow the in-kernel smc911x.c driver on RealView
This patch adds smc911x.c device configuration to the RealView
platforms. At some point it may be changed to the new smsc911x.c driver
(once complete testing was done).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01 14:54:59 +00:00
Catalin Marinas
0a3813306f RealView: Refactor the Ethernet device registration
This patch moves the Ethernet device registration from individual
realview_*.c files to core.c.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01 14:54:58 +00:00
Catalin Marinas
1bbdf637ba RealView: Clean up the machine_is_*() calls in platsmp.c
Some of the calls weren't necessary and some others were duplicated.
This patch tidies up the platsmp.c file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01 14:54:58 +00:00
Catalin Marinas
ebac6546df RealView: Use only the shadow mapping of ARM11MPCore local timers
All the cases where the local timer for a CPU is accessed happen on the
corresponding current CPU, hence no need to access the per-CPU local
timer mappings.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01 14:54:57 +00:00
Jon Callan
4c3ea37171 RealView: Add Cortex-A9 support to the EB board
This patch adds the necessary definitions and Kconfig entries to enable
Cortex-A9 (ARMv7 SMP) tiles on the RealView/EB board.

Signed-off-by: Jon Callan <Jon.Callan@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01 14:54:56 +00:00
Harry Fearnhamm
8aa2da872a RealView: Use flush_cache_all() rather than MCR in cpu_enter_lowpower()
The MCR for flushing the whole D cache is undefined on ARMv7 CPUs.

Signed-off-by: Harry Fearnhamm <Harry.Fearnhamm@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01 14:54:56 +00:00
Bahadir Balban
e7c70825a7 RealView: Add support for the Cortex-A8 Platform Baseboard
This patch adds support for RealView/PB-A8, a platform based on
Cortex-A8 with support for PCI-E and compact flash.

Signed-off-by: Bahadir Balban <bahadir.balban@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01 14:54:55 +00:00
Catalin Marinas
70bb62f8ec RealView: Allow PHYS_OFFSET at 0x70000000
RealView boards like PB11MPCore have 512MB of RAM available contiguously
at 0x70000000. Half of the memory is mirrored at 0x00000000 for
backwards compatibility. This patch adds the
CONFIG_REALVIEW_HIGH_PHYS_OFFSET option option to change the physical
base address so that the full amount of RAM is available to Linux. Note
that the EB board has 256MB of RAM also mirrored at 0x70000000, the only
board without this feature being PB1176.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-12-01 14:54:55 +00:00
Russell King
0560cf5aa5 [ARM] Add a common typesafe __io implementation
As Al did for Versatile in 2ad4f86b60,
add a typesafe __io implementation for platforms to use.  Convert
platforms to use this new simple typesafe implementation.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-30 11:45:54 +00:00
Russell King
dcea83adc6 [ARM] Hide ISA DMA API when ISA_DMA_API is unset
When ISA_DMA_API is unset, we're not implementing the ISA DMA API,
so there's no point in publishing the prototypes via asm/dma.h, nor
including the machine dependent parts of that API.

This allows us to remove a lot of mach/dma.h files which don't contain
any useful code.  Unfortunately though, some platforms put their own
private non-ISA definitions into mach/dma.h, so we leave these behind
and fix the appropriate #include statments.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29 18:42:40 +00:00
Russell King
7ef4de17cc Merge branch 'highmem' into devel
Conflicts:

	arch/arm/mach-clps7500/include/mach/memory.h
2008-11-28 15:39:02 +00:00
Nicolas Pitre
b5ee900258 [ARM] remove a common set of __virt_to_bus definitions
Let's provide an overridable default instead of having every machine
class define __virt_to_bus and __bus_to_virt to the same thing.  What
most platforms are using is bus_addr == phys_addr so such is the default.

One exception is ebsa110 which has no DMA what so ever, so the actual
definition is not important except only for proper compilation.  Also
added a comment about the special footbridge bus translation.

Let's also remove comments alluding to set_dma_addr which is not
(and should not) be commonly used.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28 15:36:49 +00:00