Commit Graph

387 Commits

Author SHA1 Message Date
Kulikov Vasiliy
fa95a6471f ALSA: msnd: check request_region() return value
request_region() may fail, if so return -EBUSY.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29 13:48:39 +02:00
Kulikov Vasiliy
5157cc8113 ALSA: sb: check get_user() return value
get_user() may fail, if so return -EFAULT.

[Fixed one missing place by tiwai]

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-07-29 12:24:22 +02:00
Takashi Iwai
5e8aa85253 Merge branch 'topic/misc' into for-linus 2010-05-20 11:59:29 +02:00
Takashi Iwai
3374cd1abd Merge branch 'topic/core-cleanup' into for-linus 2010-05-20 11:58:57 +02:00
Dan Carpenter
b0fb75ad5c ALSA: es1688: add pedantic range checks
Smatch complains that if (dev == SNDRV_CARDS) we're one past the end of
the array.  That's unlikely to happen in real life, I suppose.

Also smatch complains about "strcpy(card->shortname, pcm->name);"
The "pcm->name" buffer is 80 characters and "card->shortname" is 32
characters.  If you follow the call paths it turns out we never actually
use more than 16 characters so it's not a problem.  But anyway, let's
make it easy for people auditing this in the future.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-17 08:09:51 +02:00
Krzysztof Helt
a20971b201 ALSA: Merge es1688 and es968 drivers
The ESS ES968 chip is nothing more then a PnP companion
for a non-PnP audio chip. It was paired with non-PnP ESS' chips:
ES688 and ES1688. The ESS' audio chips are handled by the es1688
driver in native mode. The PnP cards are handled by the ES968
driver in SB compatible mode.

Move the ES968 chip handling to the es1688 driver so the driver
can handle both PnP and non-PnP cards. The es968 is removed.

Also, a new PnP id is added for the card I acquired (the change
was tested on this card).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-10 09:49:30 +02:00
Krzysztof Helt
396fa82726 ALSA: es1688: allocate snd_es1688 structure as a part of snd_card structure
Allocate the snd_es1688 during the snd_card allocation.
This allows to remove the card pointer from the snd_es1688 structure.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-10 09:48:59 +02:00
Krzysztof Helt
867f1845c5 ALSA: es968: fix wrong PnP dma index
There is only one dma for the ESS ES968 based board.
Its index is 0 and not 1.

This make the es968 card working.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-26 09:05:44 +02:00
Takashi Iwai
73029e0ff1 ALSA: info - Implement common llseek for binary mode
The llseek implementation is identical for existing driver implementations,
so let's merge to the common layer.  The same code for the text proc file
can be used even for the binary proc file.

The driver can provide its own llseek method if needed.  Then the common
code will be skipped.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-13 12:01:20 +02:00
Takashi Iwai
d97e1b7823 ALSA: info - Check file position validity in common layer
Check the validity of the file position in the common info layer before
calling read or write callbacks in assumption that entry->size is set up
properly to indicate the max file size.

Removed the redundant checks from the callbacks as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-13 12:01:14 +02:00
Takashi Iwai
24e4a1211f ALSA: info - Use standard types for info callbacks
Use loff_t, size_t and ssize_t for arguments of info callbacks
to follow the standard procfs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-13 11:57:14 +02:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Randy Dunlap
89c0ac7cab sound: fix opti92x-ad1848 build
Fix 'else' placement in ifdef block so that build succeeds:

sound/isa/opti9xx/opti92x-ad1848.c:221: error: 'else' without a previous 'if'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-08 18:36:17 +01:00
Meelis Roos
50152dfaa7 ALSA: fix jazz16 compile (udelay)
While trying to compile jazz16 isa sound driver on alpha (2.6.33+git), I
found a compile failure in jazz16.c (udelay is unknown). Fix it by
including delay.h.

Signed-foo-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-05 08:13:20 +01:00
Krzysztof Helt
fd8d47351d ALSA: opti92x: use PnP data to select Master Control port
The Master Control port (MC) is available as the last
PnP resource (OPT005). Use this value instead fo guessing.

Also, add some comments to the code.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-03 22:36:18 +01:00
Jaroslav Kysela
b8f1f5983f Merge branch 'topic/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into devel 2010-02-16 11:25:03 +01:00
Krzysztof Helt
edf12b4af6 sbawe: fix memory detection part 2
The patch "sbawe: fix memory detection" fixed detection
for memoryless SB32 cards but broke detection of memory
above 512KB. This patch fixes the regression.

The patch has been tested on the SB32 card (CT3670) with
0MB, 2MB and 8MB memory installed.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-08 09:27:23 +01:00
Krzysztof Helt
44eba3e82b ALSA: jazz16: refine dma and irq selection
Narrow the dma and irq selection after the DOS driver.

Add ALSA configuration description as well.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-25 14:15:41 +01:00
Takashi Iwai
cb3b04debb Merge branch 'fix/misc' into topic/misc 2009-12-22 07:57:54 +01:00
Krzysztof Helt
ad8decb7f5 ALSA: jazz16: Add support for Media Vision Jazz16 chipset
This is one of Sound Blaster Pro compatible chipsets which is supported
by Linux OSS driver and was missing native supoort for ALSA.

The Jazz16 audio codec is Crystal CS4216 which is capable
of playback and recording up to 48 kHz stereo.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21 12:09:22 +01:00
Krzysztof Helt
db8cf334f6 ALSA: sbawe: fix memory detection
Memory amount is increased before a successful write-read
sequence is done. Thus, 512 kB of onboard memory is detected
on memoryless cards like SB32.

Move the increasing of memory counter after successful read
is done.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21 12:03:11 +01:00
Julia Lawall
ef86f581f7 ALSA: Use kzalloc for allocating only one thing
Use kzalloc rather than kcalloc(1,...)

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
@@

- kcalloc(1,
+ kzalloc(
          ...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-19 09:40:26 +01:00
Takashi Iwai
709334c87d Merge branch 'fixes' of git://git.alsa-project.org/alsa-kernel into for-linus 2009-12-15 10:29:06 +01:00
Takashi Iwai
b89371621e Merge branch 'next/isa' into topic/misc 2009-12-14 18:01:56 +01:00
Krzysztof Helt
74c2b45b71 ALSA: sb_mixer: convert pointer tables to mixer control tables
Convert table of pointers to mixer controls into tables
of the mixer controls. It saves about 20% of the snd-sb-common
module size reported by lsmod.

The als4000 uses part of sb16's control table.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-14 11:22:25 +01:00
Julia Lawall
0d64b568fc ALSA: sound/isa/gus: Correct code taking the size of a pointer
sizeof(share_id) is just the size of the pointer.  On the other hand,
block->share_id is an array, so its size seems more appropriate.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
expression f;
type T;
@@

*f(...,(T)x,...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-14 11:16:09 +01:00
Linus Torvalds
6eb7365db6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Overwrite pin config on intel DG45ID board.
  intelhdmi - dont power off HDA link
  ALSA: hrtimer - Fix lock-up
  ALSA: intelhdmi - add channel mapping for typical configurations
  ALSA: intelhdmi - channel mapping applies to Pin
  ALSA: intelhdmi - accept DisplayPort pin
  ALSA: hda - show HBR(High Bit Rate) pin cap in procfs
  ALSA: hda - Fix LED GPIO setup for HP laptops with IDT codecs
  ASoC: Fix build of OMAP sound drivers
  ALSA: opti93x: fix irq releasing if the irq cannot be allocated
2009-12-12 11:40:50 -08:00
Krzysztof Helt
e9d0a803c1 ALSA: opti93x: use dB scale for mixer controls
Add dB scale for mixer controls. Fix dB scale for
Master Volume control.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-12 10:42:25 +01:00
Krzysztof Helt
b2e8d7dab9 ALSA: opti93x: move controls definitions to opti93x driver
Move OPTi93x controls definitions to the opti93x driver
from the common wss-lib library module. These controls
are used only by the opti93x driver.

Also, fix capture source names. They are the same as
opl3sa2 names.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-11 14:43:16 +01:00
Krzysztof Helt
14ff3e7830 ALSA: dt019x: merge into the als100 driver
The als100 driver is so similar to the dt019x/als007 driver
that one driver's source can be used for both drivers with
only few changes. Merge the dt019x driver into the als100.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-11 14:43:04 +01:00
Krzysztof Helt
5f60e49608 ALSA: opti93x: fix irq releasing if the irq cannot be allocated
Use the chip->irq to check if the irq should be released so the irq is not released
if it has not been allocated.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-10 11:39:48 +01:00
Linus Torvalds
78f1ae193d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ice1724 - aureon - modify WM8770 Master & DAC volume
  ALSA: hda/realtek: quirk for D945GCLF2 mainboard
  ALSA: hda - Terradici HDA controllers does not support 64-bit mode
  ALSA: document: Add direct git link to grub hda-analyzer
  ALSA: radio/sound/miro: fix build, cleanup depends/selects
  ALSA: hda - Generalize EAPD inversion check in patch_analog.c
  ASoC: Wrong variable returned on error
  ALSA: snd-usb-us122l: add product IDs of US-122MKII and US-144MKII
  ALSA: hda - Exclude unusable ADCs for ALC88x
  ALSA: hda - Add missing Line-Out and PCM switches as slave
  ALSA: hda - iMac 9,1 sound patch.
  ALSA: opti93x: set MC indirect registers base from PnP data
2009-12-09 19:52:13 -08:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Krzysztof Helt
e6960e194a ALSA: opti93x: set MC indirect registers base from PnP data
The PnP data on the OPTI931 and OPTI933 contains io port
range for the MC indirect registers. Use the PnP range
instead of hardwired value 0xE0E.

Also, request region of MC indirect registers so it is
marked as used to other drivers (this was missing previously).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-08 12:22:52 +01:00
Takashi Iwai
57648cd52b Merge branch 'topic/misc' into for-linus 2009-12-04 16:22:37 +01:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Krzysztof Helt
d8ea23931c ALSA: opti9xx: remove snd_opti9xx fields
Remove snd_opti9xx fields which are indirect arguments to
the snd_opti9xx_configure(). Pass these values as function
arguments.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-02 23:56:10 +01:00
Krzysztof Helt
306ecee926 ALSA: opti-miro: add PnP detection
The PCM12 and PCM20 can be set into the ISA PnP mode. The PCM12 PnP
was sold as the PnP device.
Add code to handle detection of these cards using ISA PnP framework.

Tested on the PCM20 in PnP mode. The PCM12 PnP has the same MS Windows
INF file except for a card name displayed for user.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-30 11:26:30 +01:00
Krzysztof Helt
70a5f1187b ALSA: opti-miro: separate comon probing code
Separate common probing code in order to use it
for PnP probing.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-30 11:26:22 +01:00
Krzysztof Helt
8700055e0a ALSA: opti-miro: fix OOPS if hardware is not detected
If a hardware is not detected there is a kernel crash
due to not initialized snd_miro->aci pointer. This pointer
is initialized after detection of the opti (miro) chip.

This bug was introduced by patches to expose
ACI mikser outside the snd-miro driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-27 11:21:40 +01:00
Krzysztof Helt
9dc9120c77 ALSA: opti-miro: expose ACI mixer to outside drivers
The ACI mixer is used to control the radio FM module
installed on the Miro PCM20 sound card. Expose ACI mixer
outside the sound card driver.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-23 09:41:55 +01:00
Krzysztof Helt
9aeba62971 ALSA: opti-miro: make miro.h header available outside the alsa directory
Move the miro.h header to the include/sound directory. It can
be used in the Miro PCM20 radio driver (v4l).

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-23 09:41:46 +01:00
Krzysztof Helt
616ad593fe ALSA: opti-miro: remove snd_card pointer from snd_miro structure
Remove the snd_card pointer from the snd_miro structure and
do some small code improvements.

Also, move Opti chipset detection before detection of the
ACI mixer, so the mci_base value is set in one place only.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-21 19:59:49 +01:00
Krzysztof Helt
4b28dca860 ALSA: cs4236: add dB scale for all volume controls
Use db scale for all volume controls according to Crystal's datasheets.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-19 11:52:47 +01:00
Takashi Iwai
67f2db24fb ALSA: opti-miro: Fix missing semicolon
To fix a build error
  sound/isa/opti9xx/miro.c:1281: error: expected ';' before '}' token

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18 08:37:59 +01:00
Krzysztof Helt
b67cad932c ALSA: opti-miro: use variables directly in the probe function
Use the fm_port and mpu_port variables directly in a probe function.
This completely eliminates a need to copy the fm_port value to
the snd_miro structure.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18 07:23:32 +01:00
Krzysztof Helt
b753e03e5e ALSA: cs4236: update control names
Update control names to be more closer to their meaning.
Change the "Mono" name to the "Beep" as this line is usually
used to forward the PC beeper signal to sound card's output.
Update names for both cs423x and wss.

Clean up cs4235 controls according to the cs4235 doc. Rename
some of the cs4235 controls to be consistent with the cs4236's
ones.

Also, delete one misnamed cs4231 register define.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-18 07:23:16 +01:00
Krzysztof Helt
faa1242c59 ALSA: es18xx: code improvements
1. Set the third argument of the snd_device_new to not NULL, so there is
   no warning about bug during chip detection. The third argument is not
   used in this driver. It was changed in my previous patch.

2. Remove the fm_port and mpu_port fields from the snd_es18xx structure.
   They can be converted to function arguments.

3. Remove the dmaN_size fields from the snd_es18xx structure. These
   values are used only in pointer functions and can be easily calculated.

4. Remove the ctrl_lock spinlock which is used only in one read function
   which is called once during chip initialization. There are many
   writes to the same register and they are not protected on purpose
   (see the comment ina the snd_es18xx_config_write()).

5. Use the first part of the text5Sources string table as the text4Soruces
   table (they are the same).

6. Merge the same cases for the ES1887 and ES1888 when setting chip's caps.

7. Move the snd_es18xx_reset() to __devinit section.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-08 11:26:04 +01:00
Krzysztof Helt
d114cd84a1 ALSA: cs4236: detect chip in one pass
The cs4236 was two step detection with call to the snd_wss_free()
between two steps. The snd_wss_free() did not free a sound device
created in the snd_wss_create(). This caused an OOPS during module
removal as the same sound device was released twice. The same OOPS
happened if the cs4236 module loading failed.

Fix this by adapting the snd_cs4236_create() to correctly work with
chips less capable then cs4236. The snd_cs4236_create() behaves the
same as the snd_wss_create() if the chip is less capable than the cs4236.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-05 18:10:25 +01:00
Jaroslav Kysela
d355c82a01 ALSA: rename "PC Speaker" and "PC Beep" controls to "Beep"
To avoid confusion in control names for the standard analog PC Beep generator
using a small Internal PC Speaker, rename all related "PC Speaker" and "PC
Beep" controls to "Beep" only. This name is more universal and can be also
used on more platforms without confusion.

Introduce also "Internal Speaker" in ControlNames.txt for systems with
full-featured build-in internal speaker.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-05 09:00:18 +01:00