* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
scripts/extract-ikconfig: add xz compression support
kbuild: add GNU GLOBAL tags generation
setlocalversion: update mercurial tag parsing
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c-i801: SMBus patch for Intel DH89xxCC DeviceIDs
i2c: Drop i2c_adapter.id
i2c: Deprecate i2c_driver.attach_adapter and .detach_adapter
i2c-dev: Use standard bus notification mechanism
i2c: Export i2c_for_each_dev
i2c: Get rid of <linux/i2c-id.h>
i2c: Minor fixes to upgrading-clients document
i2c: make i2c_get_adapter prototype clearer
i2c: Fix typo in instantiating-devices document
i2c-boardinfo: Fix typo in comment
commit 54405cde76 (r8169: support control of advertising.)
introduced a bug in rtl8169_init_phy()
Reported-and-tested-by: Piotr Hosowicz <piotr@hosowicz.com>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by:: Oliver Neukum <oliver@neukum.org>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Anca Emanuel <anca.emanuel@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In some cases during a threaded core dump not all the threads will have
a full register set. This happens when the signal causing the core dump
races with a thread exiting. The race happens when the exiting thread
has entered the kernel for the last time before the signal arrives, but
doesn't get far enough through the exit code to avoid being included
in the core dump.
So we get a thread included in the core dump which is never going to go
out to userspace again and only has a partial register set recorded
Normally we would catch each thread as it is about to go into userspace
and capture the full register set then.
However, this exiting thread is never going to go out to userspace
again, so we have no way to capture its full register set. It doesn't
really matter, though, as this is a thread which is effectively
already dead.
So instead of hitting a BUG() in this case (a really bad choice of
action in the first place), we use a poison value for the register
values.
[BenH]: Some cosmetic/stylistic changes and fix build on ppc32
Signed-off-by: Mike Wolf <mjw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The following code snippet:
unsigned int cpu = 0;
if (mpic->flags & MPIC_PRIMARY)
cpu = hard_smp_processor_id();
is seen in several places in the 'mpic.c' code. This changeset factors
that pattern out into a helper function called 'mpic_processor_id'.
Signed-off-by: Meador Inge <meador_inge@mentor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This property, defined in the Open PIC binding, tells the kernel not to use
the reset bit in the global configuration register. Additionally, its
presence mandates that only sources which are actually used (i.e. appear in
the device tree) should have their VECPRI bits initialized.
Although, "pic-no-reset" can be used for the same use cases that
"protected-sources" is covering, the "protected-sources" implementation was
left completely intact. This is a more pragmatic approach as there are
already several existing systems which use protected sources. If
"pic-no-reset" *and* "protected-sources" are both used, however, then
"pic-no-reset" takes precedence in terms of the init behavior and the
sanity checks done by protected sources will still take place.
Signed-off-by: Meador Inge <meador_inge@mentor.com>
Cc: Hollis Blanchard <hollis_blanchard@mentor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This binding documents several properties that have been in use for quite
some time, and adds one new property 'pic-no-reset', which controls the
runtime initialization behavior of the PIC. More specifically, the presence
of 'pic-no-reset' mandates that the PIC shall not be reset during runtime
initialization and that any initialization related to interrupt sources
shall be limited to sources explicitly referenced in the device tree. This
functionality is useful in AMP systems where multiple OSes are sharing the
PIC and the reinitialization of the PIC can interfere with OSes that are
already up and running.
The interrupt specifier definition is based off of Stuart Yoder's FSL MPIC
binding.
Signed-off-by: Meador Inge <meador_inge@mentor.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Cc: Hollis Blanchard <hollis_blanchard@mentor.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Commit b5d937de03 has a bug which causes
basically a NULL dereference in the PCI code during boot on ppc64
machines.
fetch_dev_dn() is called when dev->dev.of_node is NULL, so using that
as the starting point for the search makes no sense. It should instead
start from the device node of the PHB.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
mxs_reset_block() clears the PIO_QUEUE_MODE bit. So we have
to set it again after a controller reset.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Add .gpio_set_blink callback to support HW blinking
available on RX1950
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
s3c_adc_battery uses LEDs to indicate charging process,
retain LEDs state in suspend, otherwise user have no information if PDA
battery is charging after he put it to suspend.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Current implementation of lcd_power_set is not reliable, sometimes
it does not enable LCD at all.
Mimic WinCE behavior to fix this issue.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Add battery monitoring/charging support via pda_power and
s3c_adc_battery drivers
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
We can use generic leds-gpio driver, as latch api was converted
to gpiolib.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
It was broken by removal of rfkill_set_led_trigger_name function,
and now compiler complains about implicit declaration.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The redo label needs #ifdeffery. Fixes the following problem introduced by
commit 8a5ec0ba42 ("Lockless (and preemptless) fastpaths for slub"):
mm/slub.c: In function 'slab_free':
mm/slub.c:2124: warning: label 'redo' defined but not used
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Like the older ieee1394 core driver, firewire-core skipped scanning of
any new node whose PHY sent a self ID without "link active" bit. If a
device had this bit off mistakenly, it meant that it was inaccessible to
kernel drivers with the old IEEE 1394 driver stack but could still be
accessed by userspace drivers through the raw1394 interface.
But with firewire-core, userspace drivers don't get to see such buggy
devices anymore. This is effectively a driver regression since this
device bug is otherwise harmless.
We now attempt to scan all devices, even repeaters that don't have a
link or powered-down devices that have everything but their PHY shut
down when plugged in. This results in futile repeated scanning attempts
in case of such devices that really don't have an active link, but this
doesn't hurt since recent workqueue infrastructure lets us run more
concurrent scanning jobs than we can shake a stick at.
This should fix accessibility of Focusrite Saffire PRO 26 I/O:
http://sourceforge.net/mailarchive/forum.php?thread_name=20110314215622.5c751bb0%40stein&forum_name=ffado-user
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Now that firewire-core sets the local node's SPLIT_TIMEOUT to 2 seconds
per default, commit a481e97d3c is no
longer required.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
The SPLIT_TIMEOUT mechanism is intended to detect requests that somehow
got lost. However, when the timeout value is too low, transactions that
could have been completed successfully will be cancelled. Furthermore,
there are chips whose firmwares ignore the configured split timeout and
send late split response; known examples are the DM1x00 (BeBoB), TCD22x0
(DICE), and some OXUF936QSE firmwares.
This patch changes the default timeout to two seconds, which happens to
be the default on other OSes, too.
Actual lost requests are extremely rare, so there should be no practical
downside to increasing the split timeout even on devices that work
correctly.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
'buffer' string is copied from userspace. It is not checked whether it is
zero terminated. This may lead to overflow inside of simple_strtoul().
Changli Gao suggested to copy not more than user supplied 'size' bytes.
It was introduced before the git epoch. Files "ipt_CLUSTERIP/*" are
root writable only by default, however, on some setups permissions might be
relaxed to e.g. network admin user.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
commit f3c5c1bfd4 (make ip_tables reentrant) introduced a race in
handling the stackptr restore, at the end of ipt_do_table()
We should do it before the call to xt_info_rdunlock_bh(), or we allow
cpu preemption and another cpu overwrites stackptr of original one.
A second fix is to change the underflow test to check the origptr value
instead of 0 to detect underflow, or else we allow a jump from different
hooks.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The revision of the set type was not checked at the create command: if the
userspace sent a valid set type but with not supported revision number,
it'd create a loop.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The hash:*port* types with IPv4 silently ignored when address ranges
with non TCP/UDP were added/deleted from the set and used the first
address from the range only.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Add the SMBus Controller DeviceIDs for the Intel DH89xxCC PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
The last legitimate user of i2c_driver.attach_adapter and
.detach_adapter is gone, so we can finally deprecate these callbacks.
The last few drivers which still use these will have to be updated to
make use of standard I2C device instantiation ways instead.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Use the standard driver core mechanism to keep track of i2c adapters
present on the system: i2c_for_each_dev and a notifier. This will let
us deprecate and ultimately remove the legacy attach_adapter and
detach_adapter callbacks in i2c_driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Introduce i2c_for_each_dev(), an i2c device iterator with proper
locking for use by i2c-dev. This is needed so that we can get rid of
the attach_adapter and detach_adapter legacy callback functions.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
The last remaining ID in <linux/i2c-id.h> is no longer used anywhere,
so we can finally get rid of it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
* Typical legacy drivers implemented method .detach_client, not
.detach_adapter.
* Drop all references to __devexit, as i2c drivers shouldn't use it.
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Rename the parameter of i2c_get_adapter() to "nr", to make it clear we
are passing an adapter number and not an adapter ID (which have gone
away by now.)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
The struct i2c_board_info member holding the name is "type", not
"name".
Signed-off-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
When the OF device driver bits were converted over to the platform
device infrastructure in commit 74888760d4
("dt/net: Eliminate users of of_platform_{,un}register_driver") we
inadvertantly created probing problems in the OF case.
The NIU driver creates a dummy platform device to represent the
board that contains one or more child NIU devices. Unfortunately
we use the same name, "niu", as the OF device driver itself uses.
The result is that we try to probe the dummy "niu" parent device we
create, and since it has a NULL ofdevice pointer etc. everything
explodes:
[783019.128243] niu: niu.c:v1.1 (Apr 22, 2010)
[783019.128810] Unable to handle kernel NULL pointer dereference
[783019.128949] tsk->{mm,active_mm}->context = 000000000000039e
[783019.129078] tsk->{mm,active_mm}->pgd = fffff803afc5a000
[783019.129206] \|/ ____ \|/
[783019.129213] "@'/ .. \`@"
[783019.129220] /_| \__/ |_\
[783019.129226] \__U_/
[783019.129378] modprobe(2004): Oops [#1]
[783019.129423] TSTATE: 0000000011001602 TPC: 0000000010052ff8 TNPC: 000000000061bbb4 Y: 00000000 Not tainted
[783019.129542] TPC: <niu_of_probe+0x3c/0x2dc [niu]>
[783019.129624] g0: 8080000000000000 g1: 0000000000000000 g2: 0000000010056000 g3: 0000000000000002
[783019.129733] g4: fffff803fc1da0c0 g5: fffff800441e2000 g6: fffff803fba84000 g7: 0000000000000000
[783019.129842] o0: fffff803fe7df010 o1: 0000000010055700 o2: 0000000000000000 o3: fffff803fbacaca0
[783019.129951] o4: 0000000000000080 o5: 0000000000777908 sp: fffff803fba866e1 ret_pc: 0000000010052ff4
[783019.130083] RPC: <niu_of_probe+0x38/0x2dc [niu]>
[783019.130165] l0: fffff803fe7df010 l1: fffff803fbacafc0 l2: fffff803fbacaca0 l3: ffffffffffffffed
[783019.130273] l4: 0000000000000000 l5: 000000007fffffff l6: fffff803fba86f40 l7: 0000000000000001
[783019.130382] i0: fffff803fe7df000 i1: fffff803fc20aba0 i2: 0000000000000000 i3: 0000000000000001
[783019.130490] i4: 0000000000000000 i5: 0000000000000000 i6: fffff803fba867a1 i7: 000000000062038c
[783019.130614] I7: <platform_drv_probe+0xc/0x20>
Fix by simply renaming the parent device to "niu-board".
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits)
Input: tsc2005 - remove 'disable' sysfs attribute
Input: tsc2005 - add open/close
Input: tsc2005 - handle read errors from SPI layer
Input: tsc2005 - do not rearm timer in hardirq handler
Input: tsc2005 - don't use work for 'pen up' handling
Input: tsc2005 - do not use 0 in place of NULL
Input: tsc2005 - use true/false for boolean variables
Input: tsc2005 - hide selftest attribute if we can't reset
Input: tsc2005 - rework driver initialization code
Input: tsc2005 - set up bus type in input device
Input: tsc2005 - set up parent device
Input: tsc2005 - clear driver data after unbinding
Input: tsc2005 - add module description
Input: tsc2005 - remove driver banner message
Input: tsc2005 - remove incorrect module alias
Input: tsc2005 - convert to using dev_pm_ops
Input: tsc2005 - use spi_get/set_drvdata()
Input: introduce tsc2005 driver
Input: xen-kbdfront - move to drivers/input/misc
Input: xen-kbdfront - add grant reference for shared page
...
A syscall was added without being added to asm-generic, which
makes tile (and presumably score and unicore32) break.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Commit 8d7718aa08 changed "int"
to "u32" in the prototypes but not the definition.
I missed this when I saw the patch go by on LKML.
We cast "u32 *" to "int *" since we are tying into the underlying
atomics framework, and atomic_t uses int as its value type.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
commit 54405cde76 (r8169: support control of advertising.)
introduced a bug in rtl8169_init_phy()
Reported-by: Piotr Hosowicz <piotr@hosowicz.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Anca Emanuel <anca.emanuel@gmail.com>
Tested-by: Piotr Hosowicz <piotr@hosowicz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After "x86-64, mm: Put early page table high" already existing kernel
page table pages can be mapped using early_ioremap too so we need to
update mask_rw_pte to make sure these pages are still mapped RO.
The reason why we have to do that is explain by the commit message of
fef5ba7979:
"Xen requires that all pages containing pagetable entries to be mapped
read-only. If pages used for the initial pagetable are already mapped
then we can change the mapping to RO. However, if they are initially
unmapped, we need to make sure that when they are later mapped, they
are also mapped RO.
..SNIP..
the pagetable setup code early_ioremaps the pages to write their
entries, so we must make sure that mappings created in the early_ioremap
fixmap area are mapped RW. (Those mappings are removed before the pages
are presented to Xen as pagetable pages.)"
We accomplish all this in mask_rw_pte by mapping RO all the pages mapped
using early_ioremap apart from the last one that has been allocated
because it is not a page table page yet (it has not been hooked into the
page tables yet).
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Do not set max_pfn_mapped to the end of the initial memory mappings,
that also contain pages that don't belong in pfn space (like the mfn
list).
Set max_pfn_mapped to the last real pfn mapped in the initial memory
mappings that is the pfn backing _end.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Now cleanup_highmap actually is in two steps: one is early in head64.c
and only clears above _end; a second one is in init_memory_mapping() and
tries to clean from _brk_end to _end.
It should check if those boundaries are PMD_SIZE aligned but currently
does not.
Also init_memory_mapping() is called several times for numa or memory
hotplug, so we really should not handle initial kernel mappings there.
This patch moves cleanup_highmap() down after _brk_end is settled so
we can do everything in one step.
Also we honor max_pfn_mapped in the implementation of cleanup_highmap.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
