Commit Graph

246 Commits

Author SHA1 Message Date
Marcelo Tosatti
46a47b1ed1 KVM: convert ioapic lock to spinlock
kvm_set_irq is used from non sleepable contexes, so convert ioapic from
mutex to spinlock.

KVM-Stable-Tag.
Tested-by: Ralf Bonenkamp <ralf.bonenkamp@swyx.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-13 01:23:55 -03:00
Lai Jiangshan
eda2beda83 KVM: Add missing srcu_read_lock() for kvm_mmu_notifier_release()
I got this dmesg due to srcu_read_lock() is missing in
kvm_mmu_notifier_release().

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
arch/x86/kvm/x86.h:72 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
2 locks held by qemu-system-x86/3100:
 #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff810d73dc>] __mmu_notifier_release+0x38/0xdf
 #1:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa0130a6a>] kvm_mmu_zap_all+0x21/0x5e [kvm]

stack backtrace:
Pid: 3100, comm: qemu-system-x86 Not tainted 2.6.34-rc3-22949-gbc8a97a-dirty #2
Call Trace:
 [<ffffffff8106afd9>] lockdep_rcu_dereference+0xaa/0xb3
 [<ffffffffa0123a89>] unalias_gfn+0x56/0xab [kvm]
 [<ffffffffa0119600>] gfn_to_memslot+0x16/0x25 [kvm]
 [<ffffffffa012ffca>] gfn_to_rmap+0x17/0x6e [kvm]
 [<ffffffffa01300c1>] rmap_remove+0xa0/0x19d [kvm]
 [<ffffffffa0130649>] kvm_mmu_zap_page+0x109/0x34d [kvm]
 [<ffffffffa0130a7e>] kvm_mmu_zap_all+0x35/0x5e [kvm]
 [<ffffffffa0122870>] kvm_arch_flush_shadow+0x16/0x22 [kvm]
 [<ffffffffa01189e0>] kvm_mmu_notifier_release+0x15/0x17 [kvm]
 [<ffffffff810d742c>] __mmu_notifier_release+0x88/0xdf
 [<ffffffff810d73dc>] ? __mmu_notifier_release+0x38/0xdf
 [<ffffffff81040848>] ? exit_mm+0xe0/0x115
 [<ffffffff810c2cb0>] exit_mmap+0x2c/0x17e
 [<ffffffff8103c472>] mmput+0x2d/0xd4
 [<ffffffff81040870>] exit_mm+0x108/0x115
[...]

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-21 11:17:43 +03:00
Takuya Yoshikawa
87bf6e7de1 KVM: fix the handling of dirty bitmaps to avoid overflows
Int is not long enough to store the size of a dirty bitmap.

This patch fixes this problem with the introduction of a wrapper
function to calculate the sizes of dirty bitmaps.

Note: in mark_page_dirty(), we have to consider the fact that
  __set_bit() takes the offset as int, not long.

Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-04-20 13:06:55 +03:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Avi Kivity
70e335e168 KVM: Convert kvm->requests_lock to raw_spinlock_t
The code relies on kvm->requests_lock inhibiting preemption.

Noted by Jan Kiszka.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:13 -03:00
Michael S. Tsirkin
8b97fb0fcb KVM: do not store wqh in irqfd
wqh is unused, so we do not need to store it in irqfd anymore

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:10 -03:00
Wei Yongjun
72bb2fcd23 KVM: cleanup the failure path of KVM_CREATE_IRQCHIP ioctrl
If we fail to init ioapic device or the fail to setup the default irq
routing, the device register by kvm_create_pic() and kvm_ioapic_init()
remain unregister. This patch fixed to do this.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:10 -03:00
Wei Yongjun
1ae77badc2 KVM: kvm->arch.vioapic should be NULL if kvm_ioapic_init() failure
kvm->arch.vioapic should be NULL in case of kvm_ioapic_init() failure
due to cannot register io dev.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:09 -03:00
Jochen Maes
43db669730 KVM: Fix Codestyle in virt/kvm/coalesced_mmio.c
Fixed 2 codestyle issues in virt/kvm/coalesced_mmio.c

Signed-off-by: Jochen Maes <jochen.maes@sejo.be>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:09 -03:00
Joerg Roedel
8f0b1ab6fb KVM: Introduce kvm_host_page_size
This patch introduces a generic function to find out the
host page size for a given gfn. This function is needed by
the kvm iommu code. This patch also simplifies the x86
host_mapping_level function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:36:08 -03:00
Zhai, Edwin
ab9f4ecbb6 KVM: enable PCI multiple-segments for pass-through device
Enable optional parameter (default 0) - PCI segment (or domain) besides
BDF, when assigning PCI device to guest.

Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:06 -03:00
Sheng Yang
f0f4b93090 KVM: Fix kvm_coalesced_mmio_ring duplicate allocation
The commit 0953ca73 "KVM: Simplify coalesced mmio initialization"
allocate kvm_coalesced_mmio_ring in the kvm_coalesced_mmio_init(), but
didn't discard the original allocation...

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:36:03 -03:00
Marcelo Tosatti
6474920477 KVM: fix cleanup_srcu_struct on vm destruction
cleanup_srcu_struct on VM destruction remains broken:

BUG: unable to handle kernel paging request at ffffffffffffffff
IP: [<ffffffff802533d2>] srcu_read_lock+0x16/0x21
RIP: 0010:[<ffffffff802533d2>]  [<ffffffff802533d2>] srcu_read_lock+0x16/0x21
Call Trace:
 [<ffffffffa05354c4>] kvm_arch_vcpu_uninit+0x1b/0x48 [kvm]
 [<ffffffffa05339c6>] kvm_vcpu_uninit+0x9/0x15 [kvm]
 [<ffffffffa0569f7d>] vmx_free_vcpu+0x7f/0x8f [kvm_intel]
 [<ffffffffa05357b5>] kvm_arch_destroy_vm+0x78/0x111 [kvm]
 [<ffffffffa053315b>] kvm_put_kvm+0xd4/0xfe [kvm]

Move it to kvm_arch_destroy_vm.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
2010-03-01 12:36:01 -03:00
Avi Kivity
46a929bc15 KVM: avoid taking ioapic mutex for non-ioapic EOIs
When the guest acknowledges an interrupt, it sends an EOI message to the local
apic, which broadcasts it to the ioapic.  To handle the EOI, we need to take
the ioapic mutex.

On large guests, this causes a lot of contention on this mutex.  Since large
guests usually don't route interrupts via the ioapic (they use msi instead),
this is completely unnecessary.

Avoid taking the mutex by introducing a handled_vectors bitmap.  Before taking
the mutex, check if the ioapic was actually responsible for the acked vector.
If not, we can return early.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:46 -03:00
Marcelo Tosatti
79fac95ecf KVM: convert slots_lock to a mutex
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:45 -03:00
Marcelo Tosatti
e93f8a0f82 KVM: convert io_bus to SRCU
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:45 -03:00
Marcelo Tosatti
a983fb2387 KVM: x86: switch kvm_set_memory_alias to SRCU update
Using a similar two-step procedure as for memslots.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:45 -03:00
Marcelo Tosatti
bc6678a33d KVM: introduce kvm->srcu and convert kvm_set_memory_region to SRCU update
Use two steps for memslot deletion: mark the slot invalid (which stops
instantiation of new shadow pages for that slot, but allows destruction),
then instantiate the new empty slot.

Also simplifies kvm_handle_hva locking.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti
3ad26d8139 KVM: use gfn_to_pfn_memslot in kvm_iommu_map_pages
So its possible to iommu map a memslot before making it visible to
kvm.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti
506f0d6f9c KVM: introduce gfn_to_pfn_memslot
Which takes a memslot pointer instead of using kvm->memslots.

To be used by SRCU convertion later.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti
f7784b8ec9 KVM: split kvm_arch_set_memory_region into prepare and commit
Required for SRCU convertion later.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:44 -03:00
Marcelo Tosatti
46a26bf557 KVM: modify memslots layout in struct kvm
Have a pointer to an allocated region inside struct kvm.

[alex: fix ppc book 3s]

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-03-01 12:35:43 -03:00
Avi Kivity
980da6ce57 KVM: Simplify coalesced mmio initialization
- add destructor function
- move related allocation into constructor
- add stubs for !CONFIG_KVM_MMIO

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:41 -03:00
Avi Kivity
50eb2a3cd0 KVM: Add KVM_MMIO kconfig item
s390 doesn't have mmio, this will simplify ifdefing it out.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:41 -03:00
Avi Kivity
4c07b0a4b6 KVM: Remove ifdefs from mmu notifier initialization
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:41 -03:00
Avi Kivity
3f0852e0ac KVM: Add include guards for coalesced_mmio.h
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:41 -03:00
Avi Kivity
283d0c65e4 KVM: Disentangle mmu notifiers and coalesced_mmio registration
They aren't related.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-03-01 12:35:41 -03:00
Michael S. Tsirkin
b6a114d272 KVM: fix spurious interrupt with irqfd
kvm didn't clear irqfd counter on deassign, as a result we could get a
spurious interrupt when irqfd is assigned back. this leads to poor
performance and, in theory, guest crash.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-25 12:26:39 -02:00
Marcelo Tosatti
d72118ceca KVM: properly check max PIC pin in irq route setup
Otherwise memory beyond irq_states[16] might be accessed.

Noticed by Juan Quintela.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-25 12:26:38 -02:00
Michael S. Tsirkin
f1d1c309f3 KVM: only allow one gsi per fd
Looks like repeatedly binding same fd to multiple gsi's with irqfd can
use up a ton of kernel memory for irqfd structures.

A simple fix is to allow each fd to only trigger one gsi: triggering a
storm of interrupts in guest is likely useless anyway, and we can do it
by binding a single gsi to many interrupts if we really want to.

Cc: stable@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Acked-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-01-25 12:26:37 -02:00
Heiko Carstens
b4329db0d7 KVM: get rid of kvm_create_vm() unused label warning on s390
arch/s390/kvm/../../../virt/kvm/kvm_main.c: In function 'kvm_create_vm':
arch/s390/kvm/../../../virt/kvm/kvm_main.c:409: warning: label 'out_err' defined but not used

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-27 13:36:34 -02:00
Sheng Yang
fae3a3536a KVM: Fix possible circular locking in kvm_vm_ioctl_assign_device()
One possible order is:

KVM_CREATE_IRQCHIP ioctl(took kvm->lock) -> kvm_iobus_register_dev() ->
down_write(kvm->slots_lock).

The other one is in kvm_vm_ioctl_assign_device(), which take kvm->slots_lock
first, then kvm->lock.

Update the comment of lock order as well.

Observe it due to kernel locking debug warnings.

Cc: stable@kernel.org
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-27 13:36:31 -02:00
Roland Dreier
628ff7c1d8 anonfd: Allow making anon files read-only
It seems a couple places such as arch/ia64/kernel/perfmon.c and
drivers/infiniband/core/uverbs_main.c could use anon_inode_getfile()
instead of a private pseudo-fs + alloc_file(), if only there were a way
to get a read-only file.  So provide this by having anon_inode_getfile()
create a read-only file if we pass O_RDONLY in flags.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-22 12:27:34 -05:00
Benjamin Herrenschmidt
bcd6acd51f Merge commit 'origin/master' into next
Conflicts:
	include/linux/kvm.h
2009-12-09 17:14:38 +11:00
Avi Kivity
a9c7399d6c KVM: Allow internal errors reported to userspace to carry extra data
Usually userspace will freeze the guest so we can inspect it, but some
internal state is not available.  Add extra data to internal error
reporting so we can expose it to the debugger.  Extra data is specific
to the suberror.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:24 +02:00
Marcelo Tosatti
e50212bb51 KVM: only clear irq_source_id if irqchip is present
Otherwise kvm might attempt to dereference a NULL pointer.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:23 +02:00
Arnd Bergmann
6ff5894cdf KVM: Enable 32bit dirty log pointers on 64bit host
With big endian userspace, we can't quite figure out if a pointer
is 32 bit (shifted >> 32) or 64 bit when we read a 64 bit pointer.

This is what happens with dirty logging. To get the pointer interpreted
correctly, we thus need Arnd's patch to implement a compat layer for
the ioctl:

A better way to do this is to add a separate compat_ioctl() method that
converts this for you.

Based on initial patch from Arnd Bergmann.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:20 +02:00
Marcelo Tosatti
cd5a2685de KVM: fix irq_source_id size verification
find_first_zero_bit works with bit numbers, not bytes.

Fixes

https://sourceforge.net/tracker/?func=detail&aid=2847560&group_id=180599&atid=893831

Reported-by: "Xu, Jiajun" <jiajun.xu@intel.com>
Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-12-03 09:32:19 +02:00
Zhai, Edwin
d255f4f2ba KVM: introduce kvm_vcpu_on_spin
Introduce kvm_vcpu_on_spin, to be used by VMX/SVM to yield processing
once the cpu detects pause-based looping.

Signed-off-by: "Zhai, Edwin" <edwin.zhai@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2009-12-03 09:32:17 +02:00
Jiri Slaby
0c6ddcebd8 KVM: fix lock imbalance in kvm_*_irq_source_id()
Stanse found 2 lock imbalances in kvm_request_irq_source_id and
kvm_free_irq_source_id. They omit to unlock kvm->irq_lock on fail paths.

Fix that by adding unlock labels at the end of the functions and jump
there from the fail paths.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:12 +02:00
Alexander Graf
10474ae894 KVM: Activate Virtualization On Demand
X86 CPUs need to have some magic happening to enable the virtualization
extensions on them. This magic can result in unpleasant results for
users, like blocking other VMMs from working (vmx) or using invalid TLB
entries (svm).

Currently KVM activates virtualization when the respective kernel module
is loaded. This blocks us from autoloading KVM modules without breaking
other VMMs.

To circumvent this problem at least a bit, this patch introduces on
demand activation of virtualization. This means, that instead
virtualization is enabled on creation of the first virtual machine
and disabled on destruction of the last one.

So using this, KVM can be easily autoloaded, while keeping other
hypervisors usable.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:10 +02:00
Avi Kivity
bfd99ff5d4 KVM: Move assigned device code to own file
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:09 +02:00
Gleb Natapov
680b3648ba KVM: Drop kvm->irq_lock lock from irq injection path
The only thing it protects now is interrupt injection into lapic and
this can work lockless. Even now with kvm->irq_lock in place access
to lapic is not entirely serialized since vcpu access doesn't take
kvm->irq_lock.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:08 +02:00
Gleb Natapov
eba0226bdf KVM: Move IO APIC to its own lock
The allows removal of irq_lock from the injection path.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:08 +02:00
Gleb Natapov
280aa177dc KVM: Convert irq notifiers lists to RCU locking
Use RCU locking for mask/ack notifiers lists.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:08 +02:00
Gleb Natapov
136bdfeee7 KVM: Move irq ack notifier list to arch independent code
Mask irq notifier list is already there.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:07 +02:00
Gleb Natapov
e42bba90bf KVM: Move irq routing data structure to rcu locking
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:07 +02:00
Gleb Natapov
3e71f88bc9 KVM: Maintain back mapping from irqchip/pin to gsi
Maintain back mapping from irqchip/pin to gsi to speedup
interrupt acknowledgment notifications.

[avi: build fix on non-x86/ia64]

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:07 +02:00
Gleb Natapov
46e624b95c KVM: Change irq routing table to use gsi indexed array
Use gsi indexed array instead of scanning all entries on each interrupt
injection.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:07 +02:00
Gleb Natapov
1a6e4a8c27 KVM: Move irq sharing information to irqchip level
This removes assumptions that max GSIs is smaller than number of pins.
Sharing is tracked on pin level not GSI level.

[avi: no PIC on ia64]

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-12-03 09:32:06 +02:00