Commit Graph

1124 Commits

Author SHA1 Message Date
Linus Torvalds
ada3fa1505 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
  powerpc64: convert to dynamic percpu allocator
  sparc64: use embedding percpu first chunk allocator
  percpu: kill lpage first chunk allocator
  x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
  percpu: update embedding first chunk allocator to handle sparse units
  percpu: use group information to allocate vmap areas sparsely
  vmalloc: implement pcpu_get_vm_areas()
  vmalloc: separate out insert_vmalloc_vm()
  percpu: add chunk->base_addr
  percpu: add pcpu_unit_offsets[]
  percpu: introduce pcpu_alloc_info and pcpu_group_info
  percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
  percpu: add @align to pcpu_fc_alloc_fn_t
  percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
  percpu: drop @static_size from first chunk allocators
  percpu: generalize first chunk allocator selection
  percpu: build first chunk allocators selectively
  percpu: rename 4k first chunk allocator to page
  percpu: improve boot messages
  percpu: fix pcpu_reclaim() locking
  ...

Fix trivial conflict as by Tejun Heo in kernel/sched.c
2009-09-15 09:39:44 -07:00
Linus Torvalds
c91d7d54ea Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
  kconfig: add missing dependency of conf to localyesconfig
  kconfig: test if a .config already exists
  kconfig: make local .config default for streamline_config
  kconfig: test for /boot/config-uname after /proc/config.gz in localconfig
  kconfig: unset IKCONFIG_PROC and clean up nesting
  kconfig: search for a config to base the local(mod|yes)config on
  kconfig: keep config.gz around even if CONFIG_IKCONFIG_PROC is not set
  kconfig: have extract-ikconfig read ELF files
  kconfig: add check if end exists in extract-ikconfig
  kconfig: enable CONFIG_IKCONFIG from streamline_config.pl
  kconfig: do not warn about modules built in
  kconfig: streamline_config.pl do not stop with no depends
  kconfig: add make localyesconfig option
  kconfig: make localmodconfig to run streamline_config.pl
  kconfig: add streamline_config.pl to scripts
2009-09-14 19:59:37 -07:00
Steven Rostedt
48586218b6 kconfig: add missing dependency of conf to localyesconfig
There's a dependency missing.

$ make localyesconfig
  HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/basic/docproc
  HOSTCC  scripts/basic/hash
using config: '/boot/config-2.6.27.25-78.2.56.fc9.x86_64'
/bin/sh: line 8: scripts/kconfig/conf: No such file or directory
make[1]: *** [localyesconfig] Error 127
make: *** [localyesconfig] Error 2

Thus the script failed to run. But the sed command that converts the '=m'
to '=y' still ran. This gives us a distro config with all modules
converted to built in!

The missing dependency was for conf for localyesconfig. This
dependency was already set for localmodconfig.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-21 12:42:20 -04:00
Steven Rostedt
a7c02602a8 kconfig: test if a .config already exists
If one were to run localmodconfig or localyesconfig without having
a .config already in the file, then the end of the process would give
a warning when it tries to move the old .config to .config.old.

This patch adds a test to check if .config exists and avoid the moves
if it does not.

[ Impact: remove warning after make localmodconfig ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 22:15:55 -04:00
Steven Rostedt
a9024838d0 kconfig: make local .config default for streamline_config
As Andi Kleen pointed out, most people would expect that the local .config
file to be based for a streamline config. This patch changes the order
of searching for a config file to consider the .config in the local
directory first.

Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 22:04:05 -04:00
Steven Rostedt
810b2be656 kconfig: test for /boot/config-uname after /proc/config.gz in localconfig
Many distros put their config in /boot/config-`uname -r`, add a check
for that right after /proc/config.gz

Reported-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 22:03:45 -04:00
Steven Rostedt
d08ca2771e kconfig: unset IKCONFIG_PROC and clean up nesting
Due to cut and paste error IKCONFIG was both set and cleared.
It was suppose to be IKCONFIG_PROC to be cleared.

Also cleaned up if nesting.

Reported-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 22:02:40 -04:00
Steven Rostedt
cdfc47950a kconfig: search for a config to base the local(mod|yes)config on
Instead of using the .config in the local directory. This patch
changes streamline_config.pl to search various locations for a config.

Here's the list and order of search:

  /proc/config.gz
  /boot/vmlinuz-`uname -r`
  vmlinux  # local to the directory
  /lib/modules/`uname -r`/kernel/kernel/configs.ko
  kernel/configs.ko
  kernel/configs.o
  .config

Once it finds a file that contains a config (it checks if the binary
objects have configs first) it then uses it to create the .config
with minimum modules needed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 22:02:00 -04:00
Steven Rostedt
6be51ffc17 kconfig: have extract-ikconfig read ELF files
It would be nice to use extract-ikconfig to find the congfig.gz
in either vmlinux (not vmlinuz) or configs.ko.

This patch changes the script to also be able to read ELF files directly.

[ Impact: find config.gz in vmlinux and configs.ko ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 22:00:18 -04:00
Steven Rostedt
fd3132d581 kconfig: add check if end exists in extract-ikconfig
Both start and end should be tested for existence before continuing
to parse the config.gz file.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:59:26 -04:00
Steven Rostedt
744ffcbe86 kconfig: enable CONFIG_IKCONFIG from streamline_config.pl
Ingo Molnar suggested that the streamline_config.pl should enable
CONFIG_IKCONFIG to keep the current config in the kernel.
Then we can use scripts/extract-ikconfig to find the current
modules.

This patch changes streamline_config.pl to check if CONFIG_IKCONFIG
is not set, and if it is not, it enables it to be a module.

[ Impact: make current config options easier to find ]

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:58:54 -04:00
Steven Rostedt
ea2c1894b6 kconfig: do not warn about modules built in
The streamline_config.pl finds all the configs that are needed to
compile the currently loaded modules. After it creates the .config
file, it tests to make sure all the configs that are needed were
set.

It only looks at the configs that are modules, it does not look
at the builtin configs. This causes unnecessary warnings about modules
not being covered.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:58:41 -04:00
Steven Rostedt
74398d3224 kconfig: streamline_config.pl do not stop with no depends
If a config does not have a prompt, it must be selected.
streamline_config.pl keeps track of all configs that select other configs.
If a config that does not have a prompt needs to be set to enable a
current module, it will include all configs that select it.
Note, streamline_config.pl does not enable modules that are not already
enabled. It only keeps enabled those that were enabled and might be
needed to compile the current modules.

The code to find the selects of a config is after the code that
adds the depends. But if a config needed selects but had no dependencies,
it would not be set. Because the code would stop before getting to
the select.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:56:31 -04:00
Steven Rostedt
281c9dadc3 kconfig: add make localyesconfig option
This adds the option localyesconfig to make. This is similar to
localmodconfig, but after it removes unnecessary modules it runs

  sed -i s/=m/=y/

on the .config file. It then runs "make silentoldconfig" to fix any
wholes that were created by the conversion of modules to core.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:55:49 -04:00
Steven Rostedt
03fa25da83 kconfig: make localmodconfig to run streamline_config.pl
Running the streamline_config.pl script manually can still be confusing
for some users. This patch adds the localmodconfig option. This will
automatically run streamline_config.pl on the current .config and
then run "make silentoldconfig" to fix any wholes that might have been
created.

 $ make localmodconfig

This will remove any module configurations in .config that are not needed
to compile the modules that are loaded.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:54:28 -04:00
Steven Rostedt
dcc60243e7 kconfig: add streamline_config.pl to scripts
streamline_config.pl is a very powerful tool. For those that install
a kernel to a new box using the config file from the distribution know that
it can take forever to compile the kernel.

Making a custom config file that will still boot your box, but bring
down the compile time of the kernel can be quit painful, and to ask
someone that reported a bug to do this can be a large burdon since that
person may not even know how to build a kernel.

This script will perform "lsmod" to find all the modules loaded on the
current running system. It will read all the Makefiles to map which
CONFIG enables a module. It will read the Kconfig files to find the
dependencies and selects that may be needed to support a CONFIG.
Finally, it reads the .config file and removes any module "=m" that is
not needed to enable the currently loaded modules. The output goes to
standard out.

Here's a way to run the script. From the Linux directory that holds
a distribution .config.

 $ scripts/kconfig/streamline_config.pl arch/x86/Kconfig > config-sl
 $ mv .config config-save
 $ mv config-sl .config
 $ make oldconfig

Now you have a .config that will still build all your modules, but also
take much less time to build the kernel.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:49:43 -04:00
Tejun Heo
384be2b18a Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
	arch/sparc/kernel/smp_64.c
	arch/x86/kernel/cpu/perf_counter.c
	arch/x86/kernel/setup_percpu.c
	drivers/cpufreq/cpufreq_ondemand.c
	mm/percpu.c

Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids.  As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 14:45:31 +09:00
Ingo Molnar
89034bc2c7 Merge branch 'linus' into tracing/core
Conflicts:
	kernel/trace/trace_events_filter.c

We use the tracing/core version.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-11 14:19:09 +02:00
Ingo Molnar
e3560336be Merge branch 'linus' into tracing/urgent
Merge reason: Merge up to almost-rc6 to pick up latest perfcounters
              (on which we'll queue up a dependent fix)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09 12:46:49 +02:00
Steven Rostedt
7dbdee2e9a tracing: Fix recordmcount.pl to handle sections with only weak functions
Roland Dreier found that a section that contained only a weak
function in one of the staging drivers and this caused
recordmcount.pl to spit out a warning and fail.

Although it is strange that a driver would have a weak function, and
this function only be used in one place, it should not be something
to make recordmcount.pl fail.

This patch fixes the issue in a simple manner: if only weak
functions exist in a section, then that section will not be
recorded.

Reported-by: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-07 08:50:29 +02:00
Steven Rostedt
3f6e968ef4 tracing: do not use functions starting with .L in recordmcount.pl
On Wed, 5 Aug 2009, Ingo Molnar wrote:
> * Dave Airlie <airlied@gmail.com> wrote:
>
> > Hey,
> >
> > So I spent 3-4 hrs today (I'm stupid yes) tracking down a .o
> > breakage by blaming rawhide gcc/binutils as I was using make
> > V=1and seeing only the compiler chain running,
>
> Hm, is this that powerpc related build bug you just reported?

Well we tracked it down and it is powerpc64 specific.

Seems that in drivers/hwmon/lm93.c there's a function called:

   LM93_IN_FROM_REG()

But PPC64 has function descriptors and the real function names (the ones
you see in objdump) start with a '.'. Thus this in objdump you have:

 Disassembly of section .text:

 0000000000000000 <.LM93_IN_FROM_REG>:
       0:       7c 08 02 a6     mflr    r0
       4:       fb 81 ff e0     std     r28,-32(r1)

The function name used is .LM93_IN_FROM_REG. But gcc considers symbols
that start with ".L" as a special symbol that is used inside the assembly
stage.

The nm passed into recordmcount uses the --synthetic option which shows
the ".L" symbols (my runs outside of the build did not include the
--synthetic option, so my older patch worked). We see the function as a
local.

Now to capture all the locations that use "mcount" we need to have a
reference to link into the object file a list of mcount callers. We need a
reference that will not disappear. We try to use a global function and if
that does not work, we use a local function as a reference. But to relink
the section back into the object, we need to make it global. In this case,
we run objcopy using --globalize-symbol and --localize-symbol to convert
the symbol into a global symbol, link the mcount list, then convert it
back to a local symbol.

This works great except for this case. .L* symbols can not be converted
into a global symbol, and the mcount section referencing it will remain
unresolved.

Reported-by: Dave Airlie <airlied@gmail.com>
LKML-Reference: <alpine.DEB.2.00.0908052011590.5010@gandalf.stny.rr.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-05 22:45:07 -04:00
Linus Torvalds
9c66812b6b Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Fix missing function_graph events when we splice_read from trace_pipe
  tracing: Fix invalid function_graph entry
  trace: stop tracer in oops_enter()
  ftrace: Only update $offset when we update $ref_func
  ftrace: Fix the conditional that updates $ref_func
  tracing: only truncate ftrace files when O_TRUNC is set
  tracing: show proper address for trace-printk format
2009-08-04 15:31:51 -07:00
Ingo Molnar
e16852cfc5 Merge branch 'tracing/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into tracing/urgent 2009-08-04 13:58:28 +02:00
Joe Perches
3d202aeb7b get_maintainerpl-add-git-min-percent-option-fix
Allow an option to control the minimum percentage of sign-offs required
before being considered a maintainer.

git-min-percent has a default value of 5

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:41 -07:00
Joe Perches
afa81ee130 get_maintainer.pl: Add git-min-percent option
Allow an option to control the minimum percentage of sign-offs required
before being considered a maintainer.

git-min-percent has a default value of 5

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:41 -07:00
Joe Perches
870020f93a scripts/get_maintainer.pl: Add -f directory use
Don't require a specific file in a directory to be tested.

Also Arnd Bergmann pointed out that the MAINTAINERS pattern requirement
that directory patterns have a trailing slash was unnecessary and was
likely to be error prone.  Removed that requirement.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:40 -07:00
Matthew Wilcox
51fbb4bab6 markup_oops: fix it with 32-bit userspace on a 64-bit kernel
A 32-bit perl can't handle 64-bit addresses without using the BigInt
package.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29 19:10:34 -07:00
Matt Fleming
bd171d5ffc ftrace: Only update $offset when we update $ref_func
The value of $offset should be the offset of $ref_func from the
beginning of the object file. Therefore, we should set both variables
together.

This fixes a bug I was hitting on sh where $offset (which is used to
calcualte the addends for the __mcount_loc entries) was being set
multiple times and didn't correspond to $ref_func's offset in the object
file. The addends in __mcount_loc were calculated incorrectly, resulting
in ftrace dynamically modifying addresses that weren't mcount call
sites.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
LKML-Reference: <1248365775-25196-2-git-send-email-matt@console-pimps.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-07-23 12:20:30 -04:00
Matt Fleming
fc4c73554c ftrace: Fix the conditional that updates $ref_func
Fix the conditional that checks if we already have a $ref_func and that
the new function is weak. The code as previously checking whether either
condition was false, and we really need to only update $ref_func is both
cconditions are false.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
LKML-Reference: <1248365775-25196-1-git-send-email-matt@console-pimps.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-07-23 12:20:08 -04:00
jolsa@redhat.com
d34a4debef tracing: Remove .globl in the scripts/recordmcount.pl doc
I was reading throught the recordmcount.pl starting comment,
and spotted a tiny discrepancy.

The second example is about my_func not being global, but the
example code has the ".globl my_func" statement just moved.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: rostedt@goodmis.org
LKML-Reference: <1247773468-11594-4-git-send-email-jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-18 12:21:17 +02:00
Arnaud Lacombe
d0e1e09568 kconfig: initialize the screen before using curses(3) functions
This is needed on non ncurses based implementation to get a properly
initialized `stdscr' in main().

Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-07-17 23:06:08 +02:00
Arnaud Lacombe
668cdedfdb kconfig: variable argument lists needs `stdarg.h'
Fix build on non GNU based platforms.

Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-07-17 23:05:05 +02:00
maximilian attems
241ad11f2d kbuild, deb-pkg: fix install scripts for posix sh
bash versus dash and posh disagree on expanding $@ within double quotes:
export x="$@"
see http://bugs.debian.org/381091 for details
just use the arglist with $*.

dpkg: error processing linux-image-2.6.31-rc1_2.6.31-rc1-18_i386.deb (--install):
 subprocess pre-installation script returned error exit status 2
export: 6: 2.6.31-rc1-18: bad variable name
fixes http://bugzilla.kernel.org/show_bug.cgi?id=13567

seen on Ubuntu as there dash is the default sh,
versus bash on Debian.

Reported-by: Pauli <suokkos@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Signed-off-by: maximilian attems <max@stro.at>
Acked-By: Andres Salomon <dilinger@collabora.co.uk>
2009-07-17 23:02:57 +02:00
Linus Torvalds
29f31773e0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: finally remove the obsolete variable $TOPDIR
  gitignore: ignore scripts/ihex2fw
  Kbuild: Disable the -Wformat-security gcc flag
  gitignore: ignore gcov output files
  kbuild: deb-pkg ship changelog
  Add new __init_task_data macro to be used in arch init_task.c files.
  asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in vmlinux.lds.h
  Add new macros for page-aligned data and bss sections.
  asm-generic/vmlinux.lds.h: Fix up RW_DATA_SECTION definition.
2009-07-04 09:46:01 -07:00
Tejun Heo
c43768cbb7 Merge branch 'master' into for-next
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes.  As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.

Conflicts:
	arch/alpha/include/asm/percpu.h
	arch/mn10300/kernel/vmlinux.lds.S
	include/linux/percpu-defs.h
2009-07-04 07:13:18 +09:00
Randy Dunlap
d960eea974 kernel-doc: move ignoring kmemcheck
Somehow I managed to generate a diff that put these 2 lines
into the wrong function:  should have been in dump_struct()
instead of in dump_enum().

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-01 11:26:40 -07:00
Stephen Rothwell
15e3252464 fbdev: work around old compiler bug
When building with a 4.1.x compiler on powerpc64 (at least) we get this
error:

drivers/video/logo/logo_linux_mono.c:81: error: logo_linux_mono causes a section type conflict

This was introduced by commit ae52bb2384
("fbdev: move logo externs to header file").  This is a partial revert of
that commit sufficient to not hit the compiler bug.

Also convert _clut arrays from __initconst to __initdata.

Sam said:

  Al analysed this some time ago.  When we say something is const then
  _sometimes_ gcc annotate the section as const(?) - sometimes not.  So if
  we have two variables/functions annotated __*const and gcc decides to
  annotate the section const only in one case we get a section type
  conflict.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:55:59 -07:00
Jaswinder Singh Rajput
c512d2544c gitignore: ignore scripts/ihex2fw
scripts/ihex2fw is a generated binary and should be ignored

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-27 00:17:48 +02:00
maximilian attems
1ab18486e4 kbuild: deb-pkg ship changelog
In the series for 2.6.31 it was noticed to ship the copyright,
but the generated changelog got lost somehow.

As bonus the generated linux-image deb packages are Lenny lintian clean.

Cc: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-27 00:07:27 +02:00
Jon Smirl
b810c6ec5c powerpc: Have git ignore generated files from dtc compile
Have git ignore generated files from dtc compile

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26 14:37:23 +10:00
Tejun Heo
405d967dc7 linker script: throw away .discard section
x86 throws away .discard section but no other archs do.  Also,
.discard is not thrown away while linking modules.  Make every arch
and module linking throw it away.  This will be used to define dummy
variables for percpu declarations and definitions.

This patch is based on Ivan Kokshaysky's alpha percpu patch.

[ Impact: always throw away everything in .discard ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
2009-06-24 15:13:38 +09:00
Randy Dunlap
e34e7dbb35 kernel-doc: fix param matching for array params
Fix function actual parameter vs. kernel-doc description matching
so that a warning is not printed when it should not be:

Warning(include/linux/etherdevice.h:199): Excess function parameter 'addr' description in 'is_etherdev_addr'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-20 13:35:01 +02:00
Randy Dunlap
b2fd6dbf25 kernel-doc: ignore kmemcheck_bitfield_begin/end
Teach kernel-doc to ignore kmemcheck_bitfield_{begin,end} sugar
so that it won't generate warnings like this:

Warning(include/net/sock.h:297): No description found for parameter 'kmemcheck_bitfield_begin(flags)'
Warning(include/net/sock.h:297): No description found for parameter 'kmemcheck_bitfield_end(flags)'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-20 13:35:00 +02:00
Mike Frysinger
ac6ca5c86c kallsyms: fix inverted valid symbol checking
The previous commit (17b1f0de) introduced a slightly broken consolidation
of the memory text range checking.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-20 13:33:23 +02:00
Amerigo Wang
b767b9059f kbuild: fix build error during make htmldocs
Fix the following build error when do 'make htmldocs':

 DOCPROC Documentation/DocBook/debugobjects.xml
exec /scripts/kernel-doc: No such file or directory
exec /scripts/kernel-doc: No such file or directory

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-20 13:31:28 +02:00
Peter Oberparleiter
2521f2c228 gcov: add gcov profiling infrastructure
Enable the use of GCC's coverage testing tool gcov [1] with the Linux
kernel.  gcov may be useful for:

 * debugging (has this code been reached at all?)
 * test improvement (how do I change my test to cover these lines?)
 * minimizing kernel configurations (do I need this option if the
   associated code is never run?)

The profiling patch incorporates the following changes:

 * change kbuild to include profiling flags
 * provide functions needed by profiling code
 * present profiling data as files in debugfs

Note that on some architectures, enabling gcc's profiling option
"-fprofile-arcs" for the entire kernel may trigger compile/link/
run-time problems, some of which are caused by toolchain bugs and
others which require adjustment of architecture code.

For this reason profiling the entire kernel is initially restricted
to those architectures for which it is known to work without changes.
This restriction can be lifted once an architecture has been tested
and found compatible with gcc's profiling. Profiling of single files
or directories is still available on all platforms (see config help
text).

[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:57 -07:00
Linus Torvalds
517d08699b Merge branch 'akpm'
* akpm: (182 commits)
  fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
  fbdev: *bfin*: fix __dev{init,exit} markings
  fbdev: *bfin*: drop unnecessary calls to memset
  fbdev: bfin-t350mcqb-fb: drop unused local variables
  fbdev: blackfin has __raw I/O accessors, so use them in fb.h
  fbdev: s1d13xxxfb: add accelerated bitblt functions
  tcx: use standard fields for framebuffer physical address and length
  fbdev: add support for handoff from firmware to hw framebuffers
  intelfb: fix a bug when changing video timing
  fbdev: use framebuffer_release() for freeing fb_info structures
  radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
  s3c-fb: CPUFREQ frequency scaling support
  s3c-fb: fix resource releasing on error during probing
  carminefb: fix possible access beyond end of carmine_modedb[]
  acornfb: remove fb_mmap function
  mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
  mb862xxfb: restrict compliation of platform driver to PPC
  Samsung SoC Framebuffer driver: add Alpha Channel support
  atmel-lcdc: fix pixclock upper bound detection
  offb: use framebuffer_alloc() to allocate fb_info struct
  ...

Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16 19:50:13 -07:00
Geert Uytterhoeven
ae52bb2384 fbdev: move logo externs to header file
Now we have __initconst, we can finally move the external declarations for
the various Linux logo structures to <linux/linux_logo.h>.

James' ack dates back to the previous submission (way to long ago), when the
logos were still __initdata, which caused failures on some platforms with some
toolchain versions.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:57 -07:00
Joe Perches
7f29fd2748 scripts/get_maintainer.pl: change "die" to "warn" when command line file is not a patch
fixes git send-email with a cover letter

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:54 -07:00
Joe Perches
df4cc03682 scripts/get_maintainer.pl: allow 8 bit characters in email addresses
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:54 -07:00