Commit Graph

2506 Commits

Author SHA1 Message Date
Chuck Ebbert
ca0084fa90 [PATCH] ieee80211: TKIP requires CRC32
ieee80211_crypt_tkip will not work without CRC32.

  LD      .tmp_vmlinux1
net/built-in.o: In function `ieee80211_tkip_encrypt':
net/ieee80211/ieee80211_crypt_tkip.c:349: undefined reference to `crc32_le'

Reported by Toralf Foerster <toralf.foerster@gmx.de>

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 14:37:31 -04:00
Daniel Drake
345f6b8beb [PATCH] softmac: do shared key auth in workqueue
Johann Uhrmann reported a bcm43xx crash and Michael Buesch tracked
it down to a problem with the new shared key auth code (recursive
calls into the driver)

This patch (effectively Michael's patch with a couple of small
modifications) solves the problem by sending the authentication
challenge response frame from a workqueue entry.

I also removed a lone \n from the bcm43xx messages relating to
authentication mode - this small change was previously discussed but
not patched in.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-07-27 14:37:30 -04:00
Tetsuo Handa
f59fc7f30b [IPV4/IPV6]: Setting 0 for unused port field in RAW IP recvmsg().
From: Tetsuo Handa from-linux-kernel@i-love.sakura.ne.jp

The recvmsg() for raw socket seems to return random u16 value
from the kernel stack memory since port field is not initialized.
But I'm not sure this patch is correct.
Does raw socket return any information stored in port field?

[ BSD defines RAW IP recvmsg to return a sin_port value of zero.
  This is described in Steven's TCP/IP Illustrated Volume 2 on
  page 1055, which is discussing the BSD rip_input() implementation. ]
    
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-25 17:05:35 -07:00
Alexey Kuznetsov
7228749092 [IPV4] ipmr: ip multicast route bug fix.
IP multicast route code was reusing an skb which causes use after free
and double free.

From: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>

Note, it is real skb_clone(), not alloc_skb(). Equeued skb contains
the whole half-prepared netlink message plus room for the rest.
It could be also skb_copy(), if we want to be puristic about mangling
cloned data, but original copy is really not going to be used.  

Acked-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-25 16:45:12 -07:00
Guillaume Chazarain
d569f1d72f [IPV4]: Clear the whole IPCB, this clears also IPCB(skb)->flags.
Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 23:45:16 -07:00
Guillaume Chazarain
6b7fdc3ae1 [IPV6]: Clean skb cb on IPv6 input.
Clear the accumulated junk in IP6CB when starting to handle an IPV6
packet.

Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 23:44:44 -07:00
Patrick McHardy
d5af981e93 [NETFILTER]: Demote xt_sctp to EXPERIMENTAL
After the recent problems with all the SCTP stuff it seems reasonable
to mark this as experimental.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 22:55:29 -07:00
Patrick McHardy
10ea6ac895 [NETFILTER]: bridge netfilter: add deferred output hooks to feature-removal-schedule
Add bridge netfilter deferred output hooks to feature-removal-schedule
and disable them by default. Until their removal they will be
activated by the physdev match when needed.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 22:54:55 -07:00
Phil Oester
28658c8967 [NETFILTER]: xt_pkttype: fix mismatches on locally generated packets
Locally generated broadcast and multicast packets have pkttype set to
PACKET_LOOPBACK instead of PACKET_BROADCAST or PACKET_MULTICAST. This
causes the pkttype match to fail to match packets of either type.

The below patch remedies this by using the daddr as a hint as to
broadcast|multicast. While not pretty, this seems like the only way
to solve the problem short of just noting this as a limitation of the
match.

This resolves netfilter bugzilla #484

Signed-off-by: Phil Oester <kernel@linuxace.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 22:54:14 -07:00
Patrick McHardy
8cf8fb5687 [NETFILTER]: SNMP NAT: fix byteorder confusion
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 22:53:35 -07:00
Adrian Bunk
72b5582359 [NETFILTER]: conntrack: fix SYSCTL=n compile
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 22:53:12 -07:00
Patrick McHardy
3bc38712e3 [NETFILTER]: nf_queue: handle NF_STOP and unknown verdicts in nf_reinject
In case of an unknown verdict or NF_STOP the packet leaks. Unknown verdicts
can happen when userspace is buggy. Reinject the packet in case of NF_STOP,
drop on unknown verdicts.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 22:52:47 -07:00
Patrick McHardy
083edca05a [NETFILTER]: H.323 helper: fix possible NULL-ptr dereference
An RCF message containing a timeout results in a NULL-ptr dereference if
no RRQ has been seen before.

Noticed by the "SATURN tool", reported by Thomas Dillig <tdillig@stanford.edu>
and Isil Dillig <isil@stanford.edu>.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 22:52:10 -07:00
Stefan Rompf
6c753c3d3b [VLAN]: Fix link state propagation
When the queue of the underlying device is stopped at initialization time
or the device is marked "not present", the state will be propagated to the
vlan device and never change. Based on an analysis by Patrick McHardy.

Signed-off-by: Stefan Rompf <stefan@loplof.de>
ACKed-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 13:52:13 -07:00
David S. Miller
a922ba5510 [IPV6] xfrm6_tunnel: Delete debugging code.
It doesn't compile, and it's dubious in several regards:

1) is enabled by non-Kconfig controlled CONFIG_* value
   (noted by Randy Dunlap)
2) XFRM6_TUNNEL_SPI_MAGIC is defined after it's first use
3) the debugging messages print object pointer addresses
   which have no meaning without context

So let's just get rid of it.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 13:49:06 -07:00
Marcel Holtmann
98bcd08b5b [Bluetooth] Correct RFCOMM channel MTU for broken implementations
Some Bluetooth RFCOMM implementations try to negotiate a bigger channel
MTU than we can support for a particular session. The maximum MTU for
a RFCOMM session is limited through the L2CAP layer. So if the other
side proposes a channel MTU that is bigger than the underlying L2CAP
MTU, we should reduce it to the L2CAP MTU of the session minus five
bytes for the RFCOMM headers.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-24 12:44:25 -07:00
Ian McDonald
4b79f0af48 [DCCP]: Fix default sequence window size
When using the default sequence window size (100) I got the following in
my logs:

Jun 22 14:24:09 localhost kernel: [ 1492.114775] DCCP: Step 6 failed for
DATA packet, (LSWL(6279674225) <= P.seqno(6279674749) <=
S.SWH(6279674324)) and (P.ackno doesn't exist or LAWL(18798206530) <=
P.ackno(1125899906842620) <= S.AWH(18798206548), sending SYNC...
Jun 22 14:24:09 localhost kernel: [ 1492.115147] DCCP: Step 6 failed for
DATA packet, (LSWL(6279674225) <= P.seqno(6279674750) <=
S.SWH(6279674324)) and (P.ackno doesn't exist or LAWL(18798206530) <=
P.ackno(1125899906842620) <= S.AWH(18798206549), sending SYNC...

I went to alter the default sysctl and it didn't take for new sockets.
Below patch fixes this.

I think the default is too low but it is what the DCCP spec specifies.

As a side effect of this my rx speed using iperf goes from about 2.8 Mbits/sec
to 3.5. This is still far too slow but it is a step in the right direction.

Compile tested only for IPv6 but not particularly complex change.

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-24 12:44:21 -07:00
Panagiotis Issaris
9df3f3d28b [TIPC]: Removing useless casts
Removing useless casts

Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 15:52:20 -07:00
Patrick McHardy
8265abc082 [IPV4]: Fix nexthop realm dumping for multipath routes
Routing realms exist per nexthop, but are only returned to userspace
for the first nexthop. This is due to the fact that iproute2 only
allows to set the realm for the first nexthop and the kernel refuses
multipath routes where only a single realm is present.

Dump all realms for multipath routes to enable iproute to correctly
display them.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 15:09:55 -07:00
Panagiotis Issaris
0da974f4f3 [NET]: Conversions from kmalloc+memset to k(z|c)alloc.
Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:51:30 -07:00
Samuel Ortiz
485fb2c998 [IrDA]: Use alloc_skb() in IrDA TX path
As pointed out by Christoph Hellwig, dev_alloc_skb() is not intended to be
used for allocating TX sk_buff. The IrDA stack was exclusively calling
dev_alloc_skb() on the TX path, and this patch fixes that.

Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:50:41 -07:00
Adrian Bunk
64d2f0855e [I/OAT]: net/core/user_dma.c should #include <net/netdma.h>
Every file should #include the headers containing the prototypes for
its global functions.

Especially in cases like this one where gcc can tell us through a
compile error that the prototype was wrong...

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:49:49 -07:00
Sridhar Samudrala
dc022a9874 [SCTP]: ADDIP: Don't use an address as source until it is ASCONF-ACKed
This implements Rules D1 and D4 of Sec 4.3 in the ADDIP draft.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:49:25 -07:00
Sridhar Samudrala
9faa730f1c [SCTP]: Set chunk->data_accepted only if we are going to accept it.
Currently there is a code path in sctp_eat_data() where it is possible
to set this flag even when we are dropping this chunk.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:49:07 -07:00
Sridhar Samudrala
ad8fec1720 [SCTP]: Verify all the paths to a peer via heartbeat before using them.
This patch implements Path Initialization procedure as described in
Sec 2.36 of RFC4460.

Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:48:50 -07:00
Vlad Yasevich
cfdeef3282 [SCTP]: Unhash the endpoint in sctp_endpoint_free().
This prevents a race between the close of a socket and receive of an
incoming packet.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:48:26 -07:00
Sridhar Samudrala
37fa6878bc [SCTP]: Check for NULL arg to sctp_bucket_destroy().
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:45:47 -07:00
Guillaume Chazarain
89e1df74f8 [PKT_SCHED] netem: Fix slab corruption with netem (2nd try)
CONFIG_DEBUG_SLAB found the following bug:
netem_enqueue() in sch_netem.c gets a pointer inside a slab object:
struct netem_skb_cb *cb = (struct netem_skb_cb *)skb->cb;
But then, the slab object may be freed:
skb = skb_unshare(skb, GFP_ATOMIC)
cb is still pointing inside the freed skb, so here is a patch to
initialize cb later, and make it clear that initializing it sooner
is a bad idea.

[From Stephen Hemminger: leave cb unitialized in order to let gcc
complain in case of use before initialization]

Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:45:25 -07:00
Herbert Xu
5d9c5a3292 [IPV4]: Get rid of redundant IPCB->opts initialisation
Now that we always zero the IPCB->opts in ip_rcv, it is no longer
necessary to do so before calling netif_rx for tunneled packets.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:29:53 -07:00
Jeff Garzik
e1b90c416d [NET] ethtool: fix oops by testing correct struct member
Noticed by Willy Tarreau.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-17 12:54:40 -04:00
Dave Jones
2724a1a55f [PATCH] sch_htb compile fix.
net/sched/sch_htb.c: In function 'htb_change_class':
net/sched/sch_htb.c:1605: error: expected ';' before 'do_gettimeofday'

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-15 11:40:20 -07:00
Stephen Hemminger
b3a6251915 [PKT_SCHED] HTB: initialize upper bound properly
The upper bound for HTB time diff needs to be scaled to PSCHED
units rather than just assuming usecs.  The field mbuffer is used
in TDIFF_SAFE(), as an upper bound.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-14 16:32:27 -07:00
Stephen Hemminger
53602f92dd [IPV4]: Clear skb cb on IP input
when data arrives at IP through loopback (and possibly other devices).
So the field needs to be cleared before it confuses the route code.
This was seen when running netem over loopback, but there are probably
other device cases. Maybe this should go into stable?

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-14 14:49:32 -07:00
Herbert Xu
27b437c8b7 [NET]: Update frag_list in pskb_trim
When pskb_trim has to defer to ___pksb_trim to trim the frag_list part of
the packet, the frag_list is not updated to reflect the trimming.  This
will usually work fine until you hit something that uses the packet length
or tail from the frag_list.

Examples include esp_output and ip_fragment.

Another problem caused by this is that you can end up with a linear packet
with a frag_list attached.

It is possible to get away with this if we audit everything to make sure
that they always consult skb->len before going down onto frag_list.  In
fact we can do the samething for the paged part as well to avoid copying
the data area of the skb.  For now though, let's do the conservative fix
and update frag_list.

Many thanks to Marco Berizzi for helping me to track down this bug.

This 4-year old bug took 3 months to track down.  Marco was very patient
indeed :)

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-13 19:26:39 -07:00
Ian McDonald
a6f157a88d [NET]: fix __sk_stream_mem_reclaim
__sk_stream_mem_reclaim is only called by sk_stream_mem_reclaim.

As such the check on sk->sk_forward_alloc is not needed and can be
removed.

Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 17:58:53 -07:00
Marcel Holtmann
fd1278d720 [Bluetooth] Fix deadlock in the L2CAP layer
The Bluetooth L2CAP layer has 2 locks that are used in softirq context,
(one spinlock and one rwlock, where the softirq usage is readlock) but
where not all usages of the lock were _bh safe. The patch below corrects
this.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-12 15:34:35 -07:00
Marcel Holtmann
0263603a01 [Bluetooth] Let BT_HIDP depend on INPUT
This patch lets BT_HIDP depend on instead of select INPUT. This fixes
the following warning during an s390 build:

net/bluetooth/hidp/Kconfig:4:warning: 'select' used by config symbol
'BT_HIDP' refer to undefined symbol 'INPUT'

A dependency on INPUT also implies !S390 (and therefore makes the
explicit dependency obsolete) since INPUT is not available on s390.

The practical difference should be nearly zero, since INPUT is always
set to y unless EMBEDDED=y (or S390=y).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-12 15:34:33 -07:00
Marcel Holtmann
25ea6db04a [Bluetooth] Remaining transitions to use kzalloc()
This patch makes the remaining transitions to use kzalloc().

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-12 15:34:28 -07:00
Herbert Xu
b47b2ec198 [IPV4]: Fix error handling for fib_insert_node call
The error handling around fib_insert_node was broken because we always
zeroed the error before checking it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:59:04 -07:00
Ralf Baechle
4b260a98f1 [NETROM] lockdep: fix false positive
NETROM network devices are virtual network devices encapsulating NETROM
frames into AX.25 which will be sent through an AX.25 device, so form a
special "super class" of normal net devices; split their locks off into a
separate class since they always nest.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:59:02 -07:00
Ralf Baechle
b1d21ca83c [ROSE] lockdep: fix false positive
ROSE network devices are virtual network devices encapsulating ROSE
frames into AX.25 which will be sent through an AX.25 device, so form a
special "super class" of normal net devices; split their locks off into
a separate class since they always nest.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:58:59 -07:00
Ralf Baechle
c19c4b9c9a [AX.25]: Optimize AX.25 socket list lock
Right now all uses of the ax25_list_lock lock are _bh locks but knowing
some code is only ever getting invoked from _bh context we can better.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:58:57 -07:00
Herbert Xu
da952315c9 [IPCOMP]: Fix truesize after decompression
The truesize check has uncovered the fact that we forgot to update truesize
after pskb_expand_head.  Unfortunately pskb_expand_head can't update it for
us because it's used in all sorts of different contexts, some of which would
not allow truesize to be updated by itself.

So the solution for now is to simply update it in IPComp.

This patch also changes skb_put to __skb_put since we've just expanded
tailroom by exactly that amount so we know it's there (but gcc does not).

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:58:55 -07:00
YOSHIFUJI Hideaki
8a6ce0c083 [IPV6]: Use ipv6_addr_src_scope for link address sorting.
In the source address selection, the address must be sorted
from global to node-local.

But, ifp->scope is different from the scope for source address
selection.

                                 2001::1  fe80::1     ::1
ifp->scope                             0     0x02    0x01
ipv6_addr_src_scope(&ifp->addr)     0x0e     0x02    0x01

So, we need to use ipv6_addr_src_scope(&ifp->addr) for sorting.

And, for backward compatibility, addresses should be sorted from
new one to old one.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:58:53 -07:00
Xiaoliang (David) Wei
6150c22e2a [TCP] tcp_highspeed: Fix AI updates.
I think there is still a problem with the AIMD parameter update in
HighSpeed TCP code.

Line 125~138 of the code (net/ipv4/tcp_highspeed.c):

	/* Update AIMD parameters */
	if (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd) {
		while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd &&
		       ca->ai < HSTCP_AIMD_MAX - 1)
			ca->ai++;
	} else if (tp->snd_cwnd < hstcp_aimd_vals[ca->ai].cwnd) {
		while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd &&
		       ca->ai > 0)
			ca->ai--;

In fact, the second part (decreasing ca->ai) never decreases since the
while loop's inequality is in the reverse direction. This leads to
unfairness with multiple flows (once a flow happens to enjoy a higher
ca->ai, it keeps enjoying that even its cwnd decreases)

Here is a tentative fix (I also added a comment, trying to keep the
change clear):

Acked-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:58:50 -07:00
Stephen Hemminger
781b456a98 [MAINTAINERS]: Add proper entry for TC classifier
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:58:48 -07:00
Ralf Baechle
8bf2b7b188 [NETROM]: Drop lock before calling nr_destroy_socket
nr_destroy_socket takes the socket lock itself so it should better be
called with the socket unlocked.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:58:45 -07:00
Ralf Baechle
5cc29e3bea [NETROM]: Fix locking order when establishing a NETROM circuit.
When establishing a new circuit in nr_rx_frame the locks are taken in
a different order than in the rest of the stack.  This should be
harmless but triggers lockdep.  Either way, reordering the code a
little solves the issue.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:58:43 -07:00
Ralf Baechle
95ff9f4d3c [AX.25]: Fix locking of ax25 protocol function list.
Delivery of AX.25 frame to the layer 3 protocols happens in softirq
context so locking needs to be bh-proof.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:58:40 -07:00
Brian Haley
e55ffac601 [IPV6]: order addresses by scope
If IPv6 addresses are ordered by scope, then ipv6_dev_get_saddr() can
break-out of the device addr_list for() loop when the candidate source
address scope is less than the destination address scope.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-12 13:58:37 -07:00