Commit Graph

110 Commits

Author SHA1 Message Date
Russell King
be37030274 ARM: Remove DISCONTIGMEM support
Everything should now be using sparsemem rather than discontigmem, so
remove the code supporting discontigmem from ARM.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 10:57:35 +01:00
Linus Torvalds
7f06a8b26a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (250 commits)
  ALSA: hda: Storage class should be before const qualifier
  ASoC: tpa6130a2: Remove CPVSS and HPVdd supplies
  ASoC: tpa6130a2: Define output pins with SND_SOC_DAPM_OUTPUT
  ASoC: sdp4430 - add sdp4430 pcm ops to DAI.
  ASoC: TWL6040: Enable earphone path in codec
  ASoC: SDP4430: Add support for Earphone speaker
  ASoC: SDP4430: Add sdp4430 machine driver
  ASoC: tlv320dac33: Avoid powering off while in BIAS_OFF
  ASoC: tlv320dac33: Use dev_dbg in dac33_hard_power function
  ALSA: sound/pci/asihpi: Use kzalloc
  ALSA: hdmi - dont fail on extra nodes
  ALSA: intelhdmi - add id for the CougarPoint chipset
  ALSA: intelhdmi - user friendly codec name
  ALSA: intelhdmi - add dependency on SND_DYNAMIC_MINORS
  ALSA: asihpi: incorrect range check
  ALSA: asihpi: testing the wrong variable
  ALSA: es1688: add pedantic range checks
  ARM: McBSP: Add support for omap4 in McBSP driver
  ARM: McBSP: Fix request for irq in OMAP4
  OMAP: McBSP: Add 32-bit mode support
  ...
2010-05-20 09:41:44 -07:00
Ben Dooks
32457942b9 ARM: Merge for-2635/fb-updates1
Merge branch 'for-2635/fb-updates1' into for-linus/samsung2
2010-05-19 18:04:11 +09:00
Ben Dooks
ff1b8ba01d ARM: Merge for-2635/gpio2
Merge branch 'for-2635/gpio2' into for-linus/samsung2
2010-05-19 18:04:08 +09:00
Ben Dooks
7987bd7a70 ARM: S3C24XX: Update missed gpio calls to use gpiolib
Update a couple of S3C24XX and S3C2412 files that are still
using the GPIO number to register mapping calls to get the
s3c_gpio_chip and use the base field from that.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18 19:06:33 +09:00
Ben Dooks
2c8fcfbf73 ARM: S3C24XX: Start cleanup of GPIO numbering
Start cleaning up the numbering of GPIO banks by removing the old
bank start definitions currently being used by some of the header
files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18 19:06:32 +09:00
Ben Dooks
afdd225d0f ARM: SAMSUNG: Remove old email address for ben-linux@fluff.org
The address ben@fluff.org is old, ben-linux@fluff.org has been in use
for a long time, and we should fixup all the occasions of the older
address to avoid confusion.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-12 10:06:28 +09:00
Yauhen Kharuzhy
f1290a49c5 ARM: S3C2416: Add arch support
Add arch/arm/mach-s3c2416 for support of the Samsung S3C2416 SoC.

This patch adds support of the S3C2416 SoC, clocks, timers,
and initial IRQ support (without support of secondary set of registers).

Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
[ben-linux@fluff.org: removed files to be reworked, fixed conflicts]
[ben-linux@fluff.org: use s3c2443 reset instead of specific reset code]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-10 11:44:39 +09:00
Jassi Brar
c4806174c5 ARM: S3C2412: DMA: Remove I2S FIFO address
The S3C DMA API doesn't make use of hw_addr.to/from and also
the FIFO addresses are provided from the I2S drivers. So these
fields are redundant.
This patch removes the hw_addr.to/from fields for I2S and the
inclusion of header, paving way for the header to be moved closer
to the I2S controller drivers.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-05-07 16:35:44 +01:00
Ben Dooks
40b956f026 ARM: S3C24XX: Drop s3c2410 specific s3c2410_gpio_cfgpin()
The s3c_gpio_cfgpin() call should be functionally equivalent, so replace
the s3c2410_gpio_cfgpin() calls in the s3c24xx code with s3c_gpio_cfgpin
to allow moving away from a fixed GPIO number to register address mapping

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-06 09:32:29 +09:00
Ben Dooks
db61ac54c9 ARM: H1940: Change mach-h1940 to use gpiolib API
Change  mach-h1940 to use the gpiolib calls instead of s3c2410_gpio
directly.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-06 09:32:22 +09:00
Ben Dooks
afc84ad11b ARM: JIVE: Update mach-jive to use gpiolib API
Change mach-jive to use gpiolib for the GPIO lines that are directly
manipulated by it.

Note, we ignore any errors from gpio_request(), unlikely to see any.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-06 09:32:21 +09:00
Ben Dooks
992426bfe9 ARM: SAMSUNG: Remove dma-plat.h to allow plat-s3c64xx to be removed
dma-plat.h is the last file left in plat-s3c64xx, but to remove it we
must also change the use of dma-plat.h by the core code and the s3c24xx
implementation.

Rename the s3c24xx dma-plat.h in the common plat-samsung directory as it
may be used for other ports. Move the specific dma bits into the
mach-s3c64xx directory and update the build as needed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-21 23:10:35 +00:00
Ben Dooks
0f61628e37 ARM: S3C2412: Fixup commented out device in SMDK2413
The SMDK2413 has a commented out device that does not have any setup
data for it, so remove it for now.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 19:33:19 +09:00
Ben Dooks
b813248c61 ARM: S3C: Rename s3c_device_usb to s3c_device_ohci
Prepare for the forthcoming device changes by renaming s3c_device_usb to
s3c_device_ohci as this is what the device represents.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 19:33:19 +09:00
Ben Dooks
b3bf41be06 ARM: SAMSUNG: Reduce size of struct clk.
Reduce the size of struct clk by 12 bytes and make defining clocks with
common implementation functions easier by moving the set_rate, get_rate,
round_rate and set_parent calls into a new structure called 'struct clk_ops'
and using that instead.

This change does make a few clocks larger as they need their own clk_ops,
but this is outweighed by the number of clocks with either no ops or having
a common set of ops.

Update all the users of this.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:10 +09:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Ben Dooks
2a3a18045b ARM: S3C: Add NAND device platform data set call 2009-12-01 01:34:16 +00:00
Michael Roth
fa3012318b Kconfig: Remove useless and sometimes wrong comments
Additionally, some excessive newlines removed.

Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-09 09:40:56 +01:00
Ben Dooks
d23b351740 ARM: S3C: Add missing selection of S3C_DEV_NAND in machine Kconfigs.
A number of machines that need s3c_device_nand present do not select
this in their Kconfig entries. Add the necessary selection of the
configuration S3C_DEV_NAND so that we avoid the following error:

arch/arm/mach-s3c2410/built-in.o: In function `bast_map_io':
arch/arm/mach-s3c2410/mach-bast.c:634: undefined reference to `s3c_device_nand'
arch/arm/mach-s3c2412/built-in.o: In function `s3c2412_init_uarts':
arch/arm/mach-s3c2412/s3c2412.c:109: undefined reference to `s3c_device_nand'
arch/arm/mach-s3c2412/built-in.o: In function `jive_machine_init':
arch/arm/mach-s3c2412/mach-jive.c:673: undefined reference to `s3c_device_nand'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-09-17 10:12:28 +01:00
Ben Dooks
e6d197a695 ARM: S3C: CPUFREQ: Add debugfs support for cpufreq
Add debugfs support for the cpufreq driver to allow
information about the system state to be exported to
the user.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:56 +01:00
Ben Dooks
140780ab5a ARM: S3C24XX: CPUFREQ: S3C2412/S3C2443 IO timing support
Add IO bank timing support for S3C2412/S3C2443.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:55 +01:00
Ben Dooks
2540003686 ARM: S3C2412: Update memory register mapping and definitions
Update the mapping of the memory controler registers and
add the missing definitions of the register block for the
SSMC.

The register contents definitions can be found in the pl093
header.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:54 +01:00
Ben Dooks
22d4239973 ARM: S3C2412: CPUFREQ: Add core support.
Add core support for frequency scaling on the S3C2412 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30 23:22:54 +01:00
Russell King
547c32aeb5 Merge branch for-rmk-devel of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-06-10 22:41:06 +01:00
Ben Dooks
99ae99533a [ARM] S3C24XX: Merge devel-gpio
Merge branch 'devel-gpio' into for-rmk-devel
2009-05-21 22:10:21 +01:00
Ben Dooks
bcb8a0d6f5 [ARM] S3C: Merge next-s3c64xx-dma2 into for-rmk-devel
Merge branch 'next-s3c64xx-dma2' into for-rmk-devel

Conflicts:

	arch/arm/plat-s3c64xx/Makefile
2009-05-18 16:32:29 +01:00
Ben Dooks
070276d5d0 [ARM] S3C24XX: GPIO: Change to macros for GPIO numbering
Prepare to remove the large number of S3C2410_GPxn defines
by moving to S3C2410_GPx(n) in arch/arm.

The following perl was used to change the files:

    perl -pi~ -e 's/S3C2410_GP([A-Z])([0-9]+)([^_^0-9])/S3C2410_GP\1\(\2\)\3/g'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18 16:26:03 +01:00
Ben Dooks
ec976d6eb0 [ARM] S3C24XX: GPIO: Move gpio functions out of <mach/hardware.h>
Move all the gpio functions out of <mach/hardware.h> as
this file is for defining the generic IO base addresses
for the kernel IO calls.

Make a new header <mach/gpio-fns.h> to take this and
include it via the chain from <linux/gpio.h> which is
what most of these files should be using (and will be
changed as soon as possible).

Note, this does make minor changes to some drivers but
should not mess up any pending merges.

CC: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18 16:25:40 +01:00
Ben Dooks
eca8655ffa [ARM] S3C: Add common USB OHCI device definition
Add common definition for USB OHCI platform device, add a Kconfig
to selectively compile it and add update all the users.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07 11:04:54 +01:00
Ben Dooks
dc8fc7edef [ARM] S3C2412: Add missing cache flush in suspend code
The alterations to the suspend code missed adding a
call to the cache flushing routines during the suspend
path of the S3C2412.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01 12:28:16 +01:00
Ben Dooks
44dc94045f [ARM] S3C24XX: DMA: Split hardware regs out of <mach/dma.h>
The <mach/dma.h> is for the driver API for the DMA system and should
not have anything relying on the CPU specific registers.

Remove the registers to <plat/dma-regs.h> for the code that really
needs to know about them.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01 11:39:06 +01:00
Ben Dooks
5a9eb8da8b [ARM] S3C24XX: Move plat/dma.h
Move the platform dma.h to dma-plat.h to ensure it doen't get
confused with plat/dma.h

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01 11:39:06 +01:00
Ben Dooks
59c1ab6090 [ARM] JIVE: Fix sparse warnings about items which should be static
Make 'jive_vgg2432a4_display' and 'jive_lcd_config' static as
they are not exported, and are generating the following sparse
warnings:

mach-jive.c:280:26: warning: symbol 'jive_vgg2432a4_display' was not declared. Should it be static?
mach-jive.c:313:28: warning: symbol 'jive_lcd_config' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17 12:42:24 +01:00
Huang Weiyi
acd216a15d [ARM] S3C: remove duplicated #include
Remove duplicated #include in arch/arm/mach-s3c2412/mach-jive.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15 14:46:03 +01:00
Daniel Silverstone
c564e6ae6c i2c-s3c2410: Simplify bus frequency calculation
The platform data for the i2c-s3c2410 driver used to allow a min,
max and desired frequency for the I2C bus. This patch reduces it
to simply a desired frequency ceiling and corrects all the uses
of the platform data appropriately.

This means, for example, that on a system with a 66MHz fclk, a
request for 100KHz will achieve 65KHz which is safe and
acceptable, rather than 378KHz which it would have achieved
without this change.

Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
[ben-linux@fluff.org: tidy subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07 10:18:33 +01:00
Russell King
ed40d0c472 Merge branch 'origin' into devel
Conflicts:
	sound/soc/pxa/pxa2xx-i2s.c
2009-03-28 20:29:51 +00:00
Ben Dooks
ef30e14420 [ARM] S3C: Rename sleep.S functions to be non-cpu specific
Rename s3c2410_cpu_resume to s3c_cpu_resume and s3c2410_cpu_save to
s3c_cpu_save to remove the CPU specific naming of these functions
which are now in the generic PM code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:37:05 +00:00
Ben Dooks
4e59c25dcb [ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init.
Since we have moved a large proportion of the PM code to the common
support area, remove the cpu specific name from the initialisation
function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:35:47 +00:00
Ben Dooks
6419711a16 [ARM] S3C: Move PM support functions to common location
Start moving the PM code by moving all the common support functions
to a common location in arch/arm/plat-s3c. With the move we rename
the functions from s3cxxx_ to s3c_ to fit the new location.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08 12:23:51 +00:00
Ben Dooks
8150bc886b S3C24XX: Move and update IIS headers
Move the IIS headers to their correct place.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-05 12:00:59 +00:00
Ben Dooks
6a148eaa20 [ARM] S3C: Remove unnecessary <linux/delay.h> includes
As per Russell King's last review comment, find and remove
all unnecessary includes of <linux/delay.h> in the files
that do not need them.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18 16:36:02 +00:00
Ben Dooks
56c035c9ce Merge branch 'next-s3c64xx-device' into next-merged
Conflicts:

	arch/arm/mach-s3c2440/mach-at2440evb.c
2008-12-18 16:17:37 +00:00
Ben Dooks
7f2754378f Merge branch 'next-s3c64xx' into next-merged 2008-12-18 14:52:04 +00:00
Ben Dooks
c6ad115876 Merge branch 'next-s3c24xx' into next-merged 2008-12-18 14:52:00 +00:00
Ben Dooks
8783b3446b [ARM] JIVE: fix spi gpio implementation
Fix the name of the driver, as well as the fact we are not
passing the number of chipselects to the driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18 14:43:03 +00:00
Ben Dooks
9d325f2341 [ARM] S3C: Update time initialisation to fix S3C64XX time problems
The S3C64XX timer is running at the wrong rate due to the
assumptions made in the timer initialisation about the way
the pwm dividers work. This means that time on the S3C64XX
runs twice as fast as it should.

Fix the problem by moving to using the clk framework to setup
the pwm timer clock muxes, as the pwm-clock code has all the
necessary knowledge of how the timer clock inputs are routed.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16 10:13:02 +00:00
Ben Dooks
3e1b776c2b [ARM] S3C: Make i2c device definition common to plat-s3c
Make the device i2c0 common to plat-s3c and move the
definitions from arch/arm/plat-s3c24xx/devs.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 23:40:26 +00:00
Ben Dooks
4b31d8b225 [ARM] S3C64XX: Add initial clock framework
Add the initial clocks definitions for the s3c6400
and s3c6410. Move the epll and ext clock from the
s3c2443 support into the common code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:53:58 +00:00
Ben Dooks
e425382ed9 [ARM] S3C24XX: Update clock data on resume
Update the clock settings on resume for suspend/resume
support so that if the boot loader changes anything or
the system's PLL is reset then we return with the correct
settings.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15 21:46:08 +00:00