Commit Graph

239 Commits

Author SHA1 Message Date
Linus Torvalds
6072d13c42 Call the filesystem back whenever a page is removed from the page cache
NFS needs to be able to release objects that are stored in the page
cache once the page itself is no longer visible from the page cache.

This patch adds a callback to the address space operations that allows
filesystems to perform page cleanups once the page has been removed
from the page cache.

Original patch by: Linus Torvalds <torvalds@linux-foundation.org>
[trondmy: cover the cases of invalidate_inode_pages2() and
          truncate_inode_pages()]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-02 09:55:21 -05:00
Nick Piggin
27d20fddc8 radix-tree: fix RCU bug
Salman Qazi describes the following radix-tree bug:

In the following case, we get can get a deadlock:

0.  The radix tree contains two items, one has the index 0.
1.  The reader (in this case find_get_pages) takes the rcu_read_lock.
2.  The reader acquires slot(s) for item(s) including the index 0 item.
3.  The non-zero index item is deleted, and as a consequence the other item is
    moved to the root of the tree. The place where it used to be is queued for
    deletion after the readers finish.
3b. The zero item is deleted, removing it from the direct slot, it remains in
    the rcu-delayed indirect node.
4.  The reader looks at the index 0 slot, and finds that the page has 0 ref
    count
5.  The reader looks at it again, hoping that the item will either be freed or
    the ref count will increase. This never happens, as the slot it is looking
    at will never be updated. Also, this slot can never be reclaimed because
    the reader is holding rcu_read_lock and is in an infinite loop.

The fix is to re-use the same "indirect" pointer case that requires a slot
lookup retry into a general "retry the lookup" bit.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Reported-by: Salman Qazi <sqazi@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:32 -08:00
Dave Hansen
8d056cb965 mm/vfs: revalidate page->mapping in do_generic_file_read()
70 hours into some stress tests of a 2.6.32-based enterprise kernel, we
ran into a NULL dereference in here:

	int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
	                                        unsigned long from)
	{
---->		struct inode *inode = page->mapping->host;

It looks like page->mapping was the culprit.  (xmon trace is below).
After closer examination, I realized that do_generic_file_read() does a
find_get_page(), and eventually locks the page before calling
block_is_partially_uptodate().  However, it doesn't revalidate the
page->mapping after the page is locked.  So, there's a small window
between the find_get_page() and ->is_partially_uptodate() where the page
could get truncated and page->mapping cleared.

We _have_ a reference, so it can't get reclaimed, but it certainly
can be truncated.

I think the correct thing is to check page->mapping after the
trylock_page(), and jump out if it got truncated.  This patch has been
running in the test environment for a month or so now, and we have not
seen this bug pop up again.

xmon info:

  1f:mon> e
  cpu 0x1f: Vector: 300 (Data Access) at [c0000002ae36f770]
      pc: c0000000001e7a6c: .block_is_partially_uptodate+0xc/0x100
      lr: c000000000142944: .generic_file_aio_read+0x1e4/0x770
      sp: c0000002ae36f9f0
     msr: 8000000000009032
     dar: 0
   dsisr: 40000000
    current = 0xc000000378f99e30
    paca    = 0xc000000000f66300
      pid   = 21946, comm = bash
  1f:mon> r
  R00 = 0025c0500000006d   R16 = 0000000000000000
  R01 = c0000002ae36f9f0   R17 = c000000362cd3af0
  R02 = c000000000e8cd80   R18 = ffffffffffffffff
  R03 = c0000000031d0f88   R19 = 0000000000000001
  R04 = c0000002ae36fa68   R20 = c0000003bb97b8a0
  R05 = 0000000000000000   R21 = c0000002ae36fa68
  R06 = 0000000000000000   R22 = 0000000000000000
  R07 = 0000000000000001   R23 = c0000002ae36fbb0
  R08 = 0000000000000002   R24 = 0000000000000000
  R09 = 0000000000000000   R25 = c000000362cd3a80
  R10 = 0000000000000000   R26 = 0000000000000002
  R11 = c0000000001e7b60   R27 = 0000000000000000
  R12 = 0000000042000484   R28 = 0000000000000001
  R13 = c000000000f66300   R29 = c0000003bb97b9b8
  R14 = 0000000000000001   R30 = c000000000e28a08
  R15 = 000000000000ffff   R31 = c0000000031d0f88
  pc  = c0000000001e7a6c .block_is_partially_uptodate+0xc/0x100
  lr  = c000000000142944 .generic_file_aio_read+0x1e4/0x770
  msr = 8000000000009032   cr  = 22000488
  ctr = c0000000001e7a60   xer = 0000000020000000   trap =  300
  dar = 0000000000000000   dsisr = 40000000
  1f:mon> t
  [link register   ] c000000000142944 .generic_file_aio_read+0x1e4/0x770
  [c0000002ae36f9f0] c000000000142a14 .generic_file_aio_read+0x2b4/0x770 (unreliable)
  [c0000002ae36fb40] c0000000001b03e4 .do_sync_read+0xd4/0x160
  [c0000002ae36fce0] c0000000001b153c .vfs_read+0xec/0x1f0
  [c0000002ae36fd80] c0000000001b1768 .SyS_read+0x58/0xb0
  [c0000002ae36fe30] c00000000000852c syscall_exit+0x0/0x40
  --- Exception: c00 (System Call) at 00000080a840bc54
  SP (fffca15df30) is in userspace
  1f:mon> di c0000000001e7a6c
  c0000000001e7a6c  e9290000      ld      r9,0(r9)
  c0000000001e7a70  418200c0      beq     c0000000001e7b30        # .block_is_partially_uptodate+0xd0/0x100
  c0000000001e7a74  e9440008      ld      r10,8(r4)
  c0000000001e7a78  78a80020      clrldi  r8,r5,32
  c0000000001e7a7c  3c000001      lis     r0,1
  c0000000001e7a80  812900a8      lwz     r9,168(r9)
  c0000000001e7a84  39600001      li      r11,1
  c0000000001e7a88  7c080050      subf    r0,r8,r0
  c0000000001e7a8c  7f805040      cmplw   cr7,r0,r10
  c0000000001e7a90  7d6b4830      slw     r11,r11,r9
  c0000000001e7a94  796b0020      clrldi  r11,r11,32
  c0000000001e7a98  419d00a8      bgt     cr7,c0000000001e7b40    # .block_is_partially_uptodate+0xe0/0x100
  c0000000001e7a9c  7fa55840      cmpld   cr7,r5,r11
  c0000000001e7aa0  7d004214      add     r8,r0,r8
  c0000000001e7aa4  79080020      clrldi  r8,r8,32
  c0000000001e7aa8  419c0078      blt     cr7,c0000000001e7b20    # .block_is_partially_uptodate+0xc0/0x100

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <arunabal@in.ibm.com>
Cc: <sbest@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 07:55:31 -08:00
Michel Lespinasse
d88c0922fa Release page reference during page fault retry
This slipped by when unifying the filemap and swap versions of
lock_page_or_retry()...

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-02 17:02:31 -04:00
Namhyung Kim
0116651c85 mm: remove temporary variable on generic_file_direct_write()
'end' shadows earlier one and is not necessary at all.  Remove it and use
'pos' instead.  This removes following sparse warnings:

 mm/filemap.c:2180:24: warning: symbol 'end' shadows an earlier one
 mm/filemap.c:2132:25: originally declared here

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:09 -07:00
Michel Lespinasse
d065bd810b mm: retry page fault when blocking on disk transfer
This change reduces mmap_sem hold times that are caused by waiting for
disk transfers when accessing file mapped VMAs.

It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call
site wants mmap_sem to be released if blocking on a pending disk transfer.
In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and
do_page_fault() will then re-acquire mmap_sem and retry the page fault.

It is expected that the retry will hit the same page which will now be
cached, and thus it will complete with a low mmap_sem hold time.

Tests:

- microbenchmark: thread A mmaps a large file and does random read accesses
  to the mmaped area - achieves about 55 iterations/s. Thread B does
  mmap/munmap in a loop at a separate location - achieves 55 iterations/s
  before, 15000 iterations/s after.

- We are seeing related effects in some applications in house, which show
  significant performance regressions when running without this change.

[akpm@linux-foundation.org: fix warning & crash]
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:09 -07:00
Michel Lespinasse
b522c94da5 mm: filemap_fault: unique path for locking page
Introduce a single location where filemap_fault() locks the desired page.
There used to be two such places, depending if the initial find_get_page()
was successful or not.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:09 -07:00
Andi Kleen
4e60c86bd9 gcc-4.6: mm: fix unused but set warnings
No real bugs, just some dead code and some fixups.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:44:58 -07:00
Linus Torvalds
003386fff3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  mm: export generic_pipe_buf_*() to modules
  fuse: support splice() reading from fuse device
  fuse: allow splice to move pages
  mm: export remove_from_page_cache() to modules
  mm: export lru_cache_add_*() to modules
  fuse: support splice() writing to fuse device
  fuse: get page reference for readpages
  fuse: use get_user_pages_fast()
  fuse: remove unneeded variable
2010-05-30 09:16:14 -07:00
Linus Torvalds
105a048a4f Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (27 commits)
  Btrfs: add more error checking to btrfs_dirty_inode
  Btrfs: allow unaligned DIO
  Btrfs: drop verbose enospc printk
  Btrfs: Fix block generation verification race
  Btrfs: fix preallocation and nodatacow checks in O_DIRECT
  Btrfs: avoid ENOSPC errors in btrfs_dirty_inode
  Btrfs: move O_DIRECT space reservation to btrfs_direct_IO
  Btrfs: rework O_DIRECT enospc handling
  Btrfs: use async helpers for DIO write checksumming
  Btrfs: don't walk around with task->state != TASK_RUNNING
  Btrfs: do aio_write instead of write
  Btrfs: add basic DIO read/write support
  direct-io: do not merge logically non-contiguous requests
  direct-io: add a hook for the fs to provide its own submit_bio function
  fs: allow short direct-io reads to be completed via buffered IO
  Btrfs: Metadata ENOSPC handling for balance
  Btrfs: Pre-allocate space for data relocation
  Btrfs: Metadata ENOSPC handling for tree log
  Btrfs: Metadata reservation for orphan inodes
  Btrfs: Introduce global metadata reservation
  ...
2010-05-27 10:43:44 -07:00
Jeff Moyer
91803b499c do_generic_file_read: clear page errors when issuing a fresh read of the page
I/O errors can happen due to temporary failures, like multipath
errors or losing network contact with the iSCSI server. Because
of that, the VM will retry readpage on the page.

However, do_generic_file_read does not clear PG_error.  This
causes the system to be unable to actually use the data in the
page cache page, even if the subsequent readpage completes
successfully!

The function filemap_fault has had a ClearPageError before
readpage forever.  This patch simply adds the same to
do_generic_file_read.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Larry Woodman <lwoodman@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-26 10:20:27 -07:00
Miao Xie
c0ff7453bb cpuset,mm: fix no node to alloc memory when changing cpuset's mems
Before applying this patch, cpuset updates task->mems_allowed and
mempolicy by setting all new bits in the nodemask first, and clearing all
old unallowed bits later.  But in the way, the allocator may find that
there is no node to alloc memory.

The reason is that cpuset rebinds the task's mempolicy, it cleans the
nodes which the allocater can alloc pages on, for example:

(mpol: mempolicy)
	task1			task1's mpol	task2
	alloc page		1
	  alloc on node0? NO	1
				1		change mems from 1 to 0
				1		rebind task1's mpol
				0-1		  set new bits
				0	  	  clear disallowed bits
	  alloc on node1? NO	0
	  ...
	can't alloc page
	  goto oom

This patch fixes this problem by expanding the nodes range first(set newly
allowed bits) and shrink it lazily(clear newly disallowed bits).  So we
use a variable to tell the write-side task that read-side task is reading
nodemask, and the write-side task clears newly disallowed nodes after
read-side task ends the current memory allocation.

[akpm@linux-foundation.org: fix spello]
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Paul Menage <menage@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:06:57 -07:00
KOSAKI Motohiro
e9d6c15738 tmpfs: insert tmpfs cache pages to inactive list at first
Shaohua Li reported parallel file copy on tmpfs can lead to OOM killer.
This is regression of caused by commit 9ff473b9a7 ("vmscan: evict
streaming IO first").  Wow, It is 2 years old patch!

Currently, tmpfs file cache is inserted active list at first.  This means
that the insertion doesn't only increase numbers of pages in anon LRU, but
it also reduces anon scanning ratio.  Therefore, vmscan will get totally
confused.  It scans almost only file LRU even though the system has plenty
unused tmpfs pages.

Historically, lru_cache_add_active_anon() was used for two reasons.
1) Intend to priotize shmem page rather than regular file cache.
2) Intend to avoid reclaim priority inversion of used once pages.

But we've lost both motivation because (1) Now we have separate anon and
file LRU list.  then, to insert active list doesn't help such priotize.
(2) In past, one pte access bit will cause page activation.  then to
insert inactive list with pte access bit mean higher priority than to
insert active list.  Its priority inversion may lead to uninteded lru
chun.  but it was already solved by commit 645747462 (vmscan: detect
mapped file pages used only once).  (Thanks Hannes, you are great!)

Thus, now we can use lru_cache_add_anon() instead.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:06:56 -07:00
Josef Bacik
66f998f611 fs: allow short direct-io reads to be completed via buffered IO
This is similar to what already happens in the write case.  If we have a short
read while doing O_DIRECT, instead of just returning, fallthrough and try to
read the rest via buffered IO.  BTRFS needs this because if we encounter a
compressed or inline extent during DIO, we need to fallback on buffered.  If the
extent is compressed we need to read the entire thing into memory and
de-compress it into the users pages.  I have tested this with fsx and everything
works great.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-25 10:34:55 -04:00
Miklos Szeredi
a52116aba5 mm: export remove_from_page_cache() to modules
This is needed to enable moving pages into the page cache in fuse with
splice(..., SPLICE_F_MOVE).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:06 +02:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jiri Slaby
59e99e5b97 mm: use rlimit helpers
Make sure compiler won't do weird things with limits.  E.g.  fetching them
twice may return 2 different values after writable limits are implemented.

I.e.  either use rlimit helpers added in
3e10e716ab ("resource: add helpers for
fetching rlimits") or ACCESS_ONCE if not applicable.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:24 -08:00
Christoph Hellwig
2ecdc82ef0 kill unused invalidate_inode_pages helper
No one is calling this anymore as everyone has switched to
invalidate_mapping_pages long time ago.  Also update a few
references to it in comments.  nfs has two more, but I can't
easily figure what they are actually referring to, so I left
them as-is.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-03 14:07:55 -05:00
anfei zhou
931e80e4b3 mm: flush dcache before writing into page to avoid alias
The cache alias problem will happen if the changes of user shared mapping
is not flushed before copying, then user and kernel mapping may be mapped
into two different cache line, it is impossible to guarantee the coherence
after iov_iter_copy_from_user_atomic.  So the right steps should be:

	flush_dcache_page(page);
	kmap_atomic(page);
	write to page;
	kunmap_atomic(page);
	flush_dcache_page(page);

More precisely, we might create two new APIs flush_dcache_user_page and
flush_dcache_kern_page to replace the two flush_dcache_page accordingly.

Here is a snippet tested on omap2430 with VIPT cache, and I think it is
not ARM-specific:

	int val = 0x11111111;
	fd = open("abc", O_RDWR);
	addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
	*(addr+0) = 0x44444444;
	tmp = *(addr+0);
	*(addr+1) = 0x77777777;
	write(fd, &val, sizeof(int));
	close(fd);

The results are not always 0x11111111 0x77777777 at the beginning as expected.  Sometimes we see 0x44444444 0x77777777.

Signed-off-by: Anfei <anfei.zhou@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: <linux-arch@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-02 18:11:21 -08:00
Linus Torvalds
0531b2aac5 mm: add new 'read_cache_page_gfp()' helper function
It's a simplified 'read_cache_page()' which takes a page allocation
flag, so that different paths can control how aggressive the memory
allocations are that populate a address space.

In particular, the intel GPU object mapping code wants to be able to do
a certain amount of own internal memory management by automatically
shrinking the address space when memory starts getting tight.  This
allows it to dynamically use different memory allocation policies on a
per-allocation basis, rather than depend on the (static) address space
gfp policy.

The actual new function is a one-liner, but re-organizing the helper
functions to the point where you can do this with a single line of code
is what most of the patch is all about.

Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-27 09:20:03 -08:00
Christoph Hellwig
c05c4edd87 direct I/O fallback sync simplification
In the case of direct I/O falling back to buffered I/O we sync data
twice currently: once at the end of generic_file_buffered_write using
filemap_write_and_wait_range and once a little later in
__generic_file_aio_write using do_sync_mapping_range with all flags set.

The wait before write of the do_sync_mapping_range call does not make
any sense, so just keep the filemap_write_and_wait_range call and move
it to the right spot.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16 12:16:50 -05:00
Christoph Hellwig
94004ed726 kill wait_on_page_writeback_range
All callers really want the more logical filemap_fdatawait_range interface,
so convert them to use it and merge wait_on_page_writeback_range into
filemap_fdatawait_range.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-10 15:02:50 +01:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Alexey Dobriyan
f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Linus Torvalds
6c5daf012c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  truncate: use new helpers
  truncate: new helpers
  fs: fix overflow in sys_mount() for in-kernel calls
  fs: Make unload_nls() NULL pointer safe
  freeze_bdev: grab active reference to frozen superblocks
  freeze_bdev: kill bd_mount_sem
  exofs: remove BKL from super operations
  fs/romfs: correct error-handling code
  vfs: seq_file: add helpers for data filling
  vfs: remove redundant position check in do_sendfile
  vfs: change sb->s_maxbytes to a loff_t
  vfs: explicitly cast s_maxbytes in fiemap_check_ranges
  libfs: return error code on failed attr set
  seq_file: return a negative error code when seq_path_root() fails.
  vfs: optimize touch_time() too
  vfs: optimization for touch_atime()
  vfs: split generic_forget_inode() so that hugetlbfs does not have to copy it
  fs/inode.c: add dev-id and inode number for debugging in init_special_inode()
  libfs: make simple_read_from_buffer conventional
2009-09-24 08:32:11 -07:00
Linus Torvalds
db16826367 Merge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits)
  HWPOISON: Enable error_remove_page on btrfs
  HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs
  HWPOISON: Add madvise() based injector for hardware poisoned pages v4
  HWPOISON: Enable error_remove_page for NFS
  HWPOISON: Enable .remove_error_page for migration aware file systems
  HWPOISON: The high level memory error handler in the VM v7
  HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
  HWPOISON: shmem: call set_page_dirty() with locked page
  HWPOISON: Define a new error_remove_page address space op for async truncation
  HWPOISON: Add invalidate_inode_page
  HWPOISON: Refactor truncate to allow direct truncating of page v2
  HWPOISON: check and isolate corrupted free pages v2
  HWPOISON: Handle hardware poisoned pages in try_to_unmap
  HWPOISON: Use bitmask/action code for try_to_unmap behaviour
  HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2
  HWPOISON: Add poison check to page fault handling
  HWPOISON: Add basic support for poisoned pages in fault handler v3
  HWPOISON: Add new SIGBUS error codes for hardware poison signals
  HWPOISON: Add support for poison swap entries v2
  HWPOISON: Export some rmap vma locking to outside world
  ...
2009-09-24 07:53:22 -07:00
npiggin@suse.de
25d9e2d152 truncate: new helpers
Introduce new truncate helpers truncate_pagecache and inode_newsize_ok.
vmtruncate is also consolidated from mm/memory.c and mm/nommu.c and
into mm/truncate.c.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-09-24 08:41:47 -04:00
KOSAKI Motohiro
4b02108ac1 mm: oom analysis: add shmem vmstat
Recently we encountered OOM problems due to memory use of the GEM cache.
Generally a large amuont of Shmem/Tmpfs pages tend to create a memory
shortage problem.

We often use the following calculation to determine the amount of shmem
pages:

shmem = NR_ACTIVE_ANON + NR_INACTIVE_ANON - NR_ANON_PAGES

however the expression does not consider isolated and mlocked pages.

This patch adds explicit accounting for pages used by shmem and tmpfs.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:27 -07:00
Andi Kleen
6a46079cf5 HWPOISON: The high level memory error handler in the VM v7
Add the high level memory handler that poisons pages
that got corrupted by hardware (typically by a two bit flip in a DIMM
or a cache) on the Linux level. The goal is to prevent everyone
from accessing these pages in the future.

This done at the VM level by marking a page hwpoisoned
and doing the appropriate action based on the type of page
it is.

The code that does this is portable and lives in mm/memory-failure.c

To quote the overview comment:

High level machine check handler. Handles pages reported by the
hardware as being corrupted usually due to a 2bit ECC memory or cache
failure.

This focuses on pages detected as corrupted in the background.
When the current CPU tries to consume corruption the currently
running process can just be killed directly instead. This implies
that if the error cannot be handled for some reason it's safe to
just ignore it because no corruption has been consumed yet. Instead
when that happens another machine check will happen.

Handles page cache pages in various states. The tricky part
here is that we can access any page asynchronous to other VM
users, because memory failures could happen anytime and anywhere,
possibly violating some of their assumptions. This is why this code
has to be extremely careful. Generally it tries to use normal locking
rules, as in get the standard locks, even if that means the
error handling takes potentially a long time.

Some of the operations here are somewhat inefficient and have non
linear algorithmic complexity, because the data structures have not
been optimized for this case. This is in particular the case
for the mapping from a vma to a process. Since this case is expected
to be rare we hope we can get away with this.

There are in principle two strategies to kill processes on poison:
- just unmap the data and wait for an actual reference before
killing
- kill as soon as corruption is detected.
Both have advantages and disadvantages and should be used
in different situations. Right now both are implemented and can
be switched with a new sysctl vm.memory_failure_early_kill
The default is early kill.

The patch does some rmap data structure walking on its own to collect
processes to kill. This is unusual because normally all rmap data structure
knowledge is in rmap.c only. I put it here for now to keep
everything together and rmap knowledge has been seeping out anyways

Includes contributions from Johannes Weiner, Chris Mason, Fengguang Wu,
Nick Piggin (who did a lot of great work) and others.

Cc: npiggin@suse.de
Cc: riel@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
2009-09-16 11:50:15 +02:00
Jan Kara
18f2ee705d vfs: Remove generic_osync_inode() and sync_page_range{_nolock}()
Remove these three functions since nobody uses them anymore.

Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-14 17:08:17 +02:00
Jan Kara
148f948ba8 vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode
Introduce new function for generic inode syncing (vfs_fsync_range) and use
it from fsync() path. Introduce also new helper for syncing after a sync
write (generic_write_sync) using the generic function.

Use these new helpers for syncing from generic VFS functions. This makes
O_SYNC writes to block devices acquire i_mutex for syncing. If we really
care about this, we can make block_fsync() drop the i_mutex and reacquire
it before it returns.

CC: Evgeniy Polyakov <zbr@ioremap.net>
CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
CC: Anton Altaparmakov <aia21@cantab.net>
CC: linux-ntfs-dev@lists.sourceforge.net
CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
CC: linux-ext4@vger.kernel.org
CC: tytso@mit.edu
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-14 17:08:15 +02:00
Christoph Hellwig
eef9938067 vfs: Rename generic_file_aio_write_nolock
generic_file_aio_write_nolock() is now used only by block devices and raw
character device. Filesystems should use __generic_file_aio_write() in case
generic_file_aio_write() doesn't suit them. So rename the function to
blkdev_aio_write() and move it to fs/blockdev.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-14 17:08:15 +02:00
Jan Kara
c7b50db21f vfs: Remove syncing from generic_file_direct_write() and generic_file_buffered_write()
generic_file_direct_write() and generic_file_buffered_write() called
generic_osync_inode() if it was called on O_SYNC file or IS_SYNC inode. But
this is superfluous since generic_file_aio_write() does the syncing as well.
Also XFS and OCFS2 which call these functions directly handle syncing
themselves. So let's have a single place where syncing happens:
generic_file_aio_write().

We slightly change the behavior by syncing only the range of file to which the
write happened for buffered writes but that should be all that is required.

CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-14 17:08:15 +02:00
Jan Kara
e4dd9de3c6 vfs: Export __generic_file_aio_write() and add some comments
Rename __generic_file_aio_write_nolock() to __generic_file_aio_write(), add
comments to write helpers explaining how they should be used and export
__generic_file_aio_write() since it will be used by some filesystems.

CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-14 17:08:14 +02:00
Jan Kara
d3bccb6f4b vfs: Introduce filemap_fdatawait_range
This simple helper saves some filesystems conversion from byte offset
to page numbers and also makes the fdata* interface more complete.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-14 17:08:14 +02:00
Josef Bacik
c8236db9cd mm: mark page accessed before we write_end()
In testing a backport of the write_begin/write_end AOPs, a 10% re-read
regression was noticed when running iozone.  This regression was
introduced because the old AOPs would always do a mark_page_accessed(page)
after the commit_write, but when the new AOPs where introduced, the only
place this was kept was in pagecache_write_end().

This patch does the same thing in the generic case as what is done in
pagecache_write_end(), which is just to mark the page accessed before we
do write_end().

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06 13:57:03 -07:00
Mel Gorman
6484eb3e2a page allocator: do not check NUMA node ID when the caller knows the node is valid
Callers of alloc_pages_node() can optionally specify -1 as a node to mean
"allocate from the current node".  However, a number of the callers in
fast paths know for a fact their node is valid.  To avoid a comparison and
branch, this patch adds alloc_pages_exact_node() that only checks the nid
with VM_BUG_ON().  Callers that know their node is valid are then
converted.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Paul Mundt <lethal@linux-sh.org>	[for the SLOB NUMA bits]
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:32 -07:00
Wu Fengguang
7ffc59b4d0 readahead: enforce full sync mmap readahead size
Now that we do readahead for sequential mmap reads, here is a simple
evaluation of the impacts, and one further optimization.

It's an NFS-root debian desktop system, readahead size = 60 pages.
The numbers are grabbed after a fresh boot into console.

approach        pgmajfault      RA miss ratio   mmap IO count   avg IO size(pages)
   A            383             31.6%           383             11
   B            225             32.4%           390             11
   C            224             32.6%           307             13

case A: mmap sync/async readahead disabled
case B: mmap sync/async readahead enabled, with enforced full async readahead size
case C: mmap sync/async readahead enabled, with enforced full sync/async readahead size
or:
A = vanilla 2.6.30-rc1
B = A plus mmap readahead
C = B plus this patch

The numbers show that
- there are good possibilities for random mmap reads to trigger readahead
- 'pgmajfault' is reduced by 1/3, due to the _async_ nature of readahead
- case C can further reduce IO count by 1/4
- readahead miss ratios are not quite affected

The theory is
- readahead is _good_ for clustered random reads, and can perform
  _better_ than readaround because they could be _async_.
- async readahead size is guaranteed to be larger than readaround
  size, and they are _async_, hence will mostly behave better
However for B
- sync readahead size could be smaller than readaround size, hence may
  make things worse by produce more smaller IOs
which will be fixed by this patch.

Final conclusion:
- mmap readahead reduced major faults by 1/3 and no obvious overheads;
- mmap io can be further reduced by 1/4 with this patch.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:30 -07:00
Wu Fengguang
61b7cbdba2 readahead: remove redundant test in shrink_readahead_size_eio()
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:30 -07:00
Wu Fengguang
d30a11004e readahead: record mmap read-around states in file_ra_state
Mmap read-around now shares the same code style and data structure with
readahead code.

This also removes do_page_cache_readahead().  Its last user, mmap
read-around, has been changed to call ra_submit().

The no-readahead-if-congested logic is dumped by the way.  Users will be
pretty sensitive about the slow loading of executables.  So it's
unfavorable to disabled mmap read-around on a congested queue.

[akpm@linux-foundation.org: coding-style fixes]
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:29 -07:00
Wu Fengguang
2fad6f5dee readahead: enforce full readahead size on async mmap readahead
We need this in one particular case and two more general ones.

Now we do async readahead for sequential mmap reads, and do it with the
help of PG_readahead.  For normal reads, PG_readahead is the sufficient
condition to do a sequential readahead.  But unfortunately, for mmap
reads, there is a tiny nuisance:

[11736.998347] readahead-init0(process: sh/23926, file: sda1/w3m, offset=0:4503599627370495, ra=0+4-3) = 4
[11737.014985] readahead-around(process: w3m/23926, file: sda1/w3m, offset=0:0, ra=290+32-0) = 17
[11737.019488] readahead-around(process: w3m/23926, file: sda1/w3m, offset=0:0, ra=118+32-0) = 32
[11737.024921] readahead-interleaved(process: w3m/23926, file: sda1/w3m, offset=0:2, ra=4+6-6) = 6
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~                                                 ~~~~~~~~~~~~~

An unfavorably small readahead.  The original dumb read-around size could
be more efficient.

That happened because ld-linux.so does a read(832) in L1 before mmap(),
which triggers a 4-page readahead, with the second page tagged
PG_readahead.

L0: open("/lib/libc.so.6", O_RDONLY)        = 3
L1: read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\342"..., 832) = 832
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
L2: fstat(3, {st_mode=S_IFREG|0755, st_size=1420624, ...}) = 0
L3: mmap(NULL, 3527256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fac6e51d000
L4: mprotect(0x7fac6e671000, 2097152, PROT_NONE) = 0
L5: mmap(0x7fac6e871000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x154000) = 0x7fac6e871000
L6: mmap(0x7fac6e876000, 16984, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fac6e876000
L7: close(3)                                = 0

In general, the PG_readahead flag will also be hit in cases

- sequential reads

- clustered random reads

A full readahead size is desirable in both cases.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:29 -07:00
Wu Fengguang
70ac23cfa3 readahead: sequential mmap readahead
Auto-detect sequential mmap reads and do readahead for them.

The sequential mmap readahead will be triggered when
- sync readahead: it's a major fault and (prev_offset == offset-1);
- async readahead: minor fault on PG_readahead page with valid readahead state.

The benefits of doing readahead instead of read-around:
- less I/O wait thanks to async readahead
- double real I/O size and no more cache hits

The single stream case is improved a little.
For 100,000 sequential mmap reads:

                                    user       system    cpu        total
(1-1)  plain -mm, 128KB readaround: 3.224      2.554     48.40%     11.838
(1-2)  plain -mm, 256KB readaround: 3.170      2.392     46.20%     11.976
(2)  patched -mm, 128KB readahead:  3.117      2.448     47.33%     11.607

The patched (2) has smallest total time, since it has no cache hit overheads
and less I/O block time(thanks to async readahead). Here the I/O size
makes no much difference, since there's only one single stream.

Note that (1-1)'s real I/O size is 64KB and (1-2)'s real I/O size is 128KB,
since the half of the read-around pages will be readahead cache hits.

This is going to make _real_ differences for _concurrent_ IO streams.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:29 -07:00
Linus Torvalds
ef00e08e26 readahead: clean up and simplify the code for filemap page fault readahead
This shouldn't really change behavior all that much, but the single rather
complex function with read-ahead inside a loop etc is broken up into more
manageable pieces.

The behaviour is also less subtle, with the read-ahead being done up-front
rather than inside some subtle loop and thus avoiding the now unnecessary
extra state variables (ie "did_readaround" is gone).

Fengguang: the code split in fact fixed a bug reported by Pavel Levshin:
the PGMAJFAULT accounting used to be bypassed when MADV_RANDOM is set, in
which case the original code will directly jump to no_cached_page reading.

Cc: Pavel Levshin <lpk@581.spb.su>
Cc: <wli@movementarian.org>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:29 -07:00
Wu Fengguang
f7e839dd36 readahead: move max_sane_readahead() calls into force_page_cache_readahead()
Impact: code simplification.

Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:28 -07:00
Daisuke Nishimura
e767e0561d memcg: fix deadlock between lock_page_cgroup and mapping tree_lock
mapping->tree_lock can be acquired from interrupt context.  Then,
following dead lock can occur.

Assume "A" as a page.

 CPU0:
       lock_page_cgroup(A)
		interrupted
			-> take mapping->tree_lock.
 CPU1:
       take mapping->tree_lock
		-> lock_page_cgroup(A)

This patch tries to fix above deadlock by moving memcg's hook to out of
mapping->tree_lock.  charge/uncharge of pagecache/swapcache is protected
by page lock, not tree_lock.

After this patch, lock_page_cgroup() is not called under mapping->tree_lock.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29 08:40:02 -07:00
Chris Mason
f69955855e Export filemap_write_and_wait_range
This wasn't exported before and is useful (used by the experimental ext3
data=guarded code)

Signed-off-by: Chris Mason <chris.mason@oracle.com>
Acked-by: Theodore Tso <tytso@mit.edu>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-16 07:47:49 -07:00
Randy Dunlap
697f619fc8 filemap: fix kernel-doc warnings
Fix filemap.c kernel-doc warnings:

Warning(mm/filemap.c:575): No description found for parameter 'page'
Warning(mm/filemap.c:575): No description found for parameter 'waiter'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:30 -07:00
Evgeniy Polyakov
18bc0bbd16 Staging: pohmelfs: kconfig/makefile and vfs changes.
This patch adds Kconfig and Makefile entries and exports to
VFS functions to be used by POHMELFS.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:36 -07:00
David Howells
385e1ca5f2 CacheFiles: Permit the page lock state to be monitored
Add a function to install a monitor on the page lock waitqueue for a particular
page, thus allowing the page being unlocked to be detected.

This is used by CacheFiles to detect read completion on a page in the backing
filesystem so that it can then copy the data to the waiting netfs page.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:39 +01:00
David Howells
266cf658ef FS-Cache: Recruit a page flags for cache management
Recruit a page flag to aid in cache management.  The following extra flag is
defined:

 (1) PG_fscache (PG_private_2)

     The marked page is backed by a local cache and is pinning resources in the
     cache driver.

If PG_fscache is set, then things that checked for PG_private will now also
check for that.  This includes things like truncation and page invalidation.
The function page_has_private() had been added to make the checks for both
PG_private and PG_private_2 at the same time.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:36 +01:00