Current kernel has no support for autocentering for Logitech wheels. By
default autocentering enabled in wheel and constant effect does not work
properly. Using USB sniffer I found command which change autocentering
settings: 0xFE, 0x0D, 0x0R, 0x0L, 0x80, 0x00, 0x00, where R - clockwise force,
L - counter-clockwise (0x0-0xF, 0xC = 100%).
Signed-off-by: Sergey Belyashov <Sergey.Belyashov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Kconfig option for HID_COMPAT should read "lose", not "loose".
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This seems to be the very same device, as already supported Smartjoy
dual Plus, but with slightly different vendor ID. Let's support this
one too.
Reported-by: David Ashley <dashxdr@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch reverts the change made four years ago here:
http://www.vg.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-hid-2.4.25-pre7.patch
UPS's made by MGE can be used with usbhid just fine, and by removing the
ignore quirk allows them to be used with HAL so they just work when plugged
in, without needing to be manually configured.
With the ignore quirk in place a user would have to configure NUT before the
UPS could be used, as NUT uses it's own internal USB matching framework
to match against the USB devices, do low level control messages on the
device and then parse the HID tables all in userspace.
This is not needed, as allowing the device to be claimed as a usbhid device
allows it to be used like any other USB UPS device. The devices correctly
advertise the power device page which can be queried for the device state.
I assume the quirk was changed so that people using < libusb 0.1.8 could
still use NUT's internal HID code to manage the UPS.
libusb 0.1.8 was released quite some time ago: 2004-02-11.
This patch does not break NUT as in drivers/libusb.c the device is force
unbound from the kernel driver using usb_detach_kernel_driver_np () where
it can be controlled like normal.
[jkosina@suse.cz: adapt to the new hidbus code]
Signed-off-by: Richard Hughes <rhughes@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Introduce a list of devices for which there is need to
force a creation of the hiddev interface, but still they
are operated by generic driver (i.e. certain UPS).
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Merge the logitech force feedback processing directly into logitech
driver from the usbhid core.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move the handling of the leds resetting from the core to
the dell and logitech drivers.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move connecting from usbhid to the hid layer and fix also hidp in
that manner.
This removes all the ignore/force hidinput/hiddev connecting quirks.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Remove support for both dynamic and static report descriptor
quirks. There is no longer rdesc code which it would support,
so it's useless.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Bring switch and cases into coding style and save thus some
indentation to make the code tighter.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add compat option to hid code to allow loading of all modules on
systems which don't allow autoloading because of old userspace.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move ignore quirks from usbhid-quirks into hid-core code. Also don't output
warning when ENODEV is error code in usbhid and try ordinal input in hidp
when that error is returned.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This mapping are currently used on 2 placces and will be needed by more
quirk drivers, so move them to hid.h to allow them to use it.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move ids from hid-quirks.c into separate file, since it will be needed in
more than one place.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Next step for complete hid bus, this patch includes:
- call parser either from probe or from hid-core if there is no probe.
- add ll_driver structure and centralize some stuff there (open, close...)
- split and merge usb_hid_configure and hid_probe into several functions
to allow hooks/fixes between them
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make a bus from hid core. This is the first step for converting all the
quirks and separate almost-drivers into real drivers attached to this bus.
It's implemented to change behaviour in very tiny manner, so that no driver
needs to be changed this time.
Also add generic drivers for both usb and bt into usbhid or hidp
respectively which will bind all non-blacklisted device. Those blacklisted
will be either grabbed by special drivers or by nobody if they are broken at
the very rude base.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This driver adds support for the multitouch trackpad on the new
Apple Macbook Air and Macbook Pro Penryn laptops. It replaces the
appletouch driver on those computers, and integrates well with the
synaptics driver of the Xorg system.
[dtor@mail.ru: various cleanups]
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
In drivers/hid/hid-input.c, the apple_fn_keys translation table
contains no entries for the F5 and F6 keys. This patch maps the F5 and
F6 keys to KBDILLUMDOWN and KBDILLUMUP, respektively, which make them
work as keyboard backlight control keys.
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch completely removes the dependency of usbkbd and usbmouse drivers
on usbhid code.
usbkbd/usbmouse drivers are not needed in the vast majority of cases anyway,
and they shouldn't be loaded in standard configurations at all. They are supposed
to be as trivial as possible, and searching for HID_QUIRK_IGNORE can even be
bad in some cases.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds in a quirk for the additional un-mapped buttons on the
gyration MCE remote.
Defines are now alphabetical.
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch is based on one provided by Jiri Kosina to handle the sleep
button. I just added some cleanup and integrated it into my series.
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Logitech DiNovo desktop needs the same quirk as other DiNovo
devices.
Reported-by: Farid Benamrouche <farid.benamrouche@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When usbmouse/kbd is set to build, USB_HID is never defined due to
the USB_HID!=y Kconfig rule. Test CONFIG_USB_HID_MODULE in both
drivers instead.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some Logitech mice have a tilt wheel which register as HWHEEL buttons.
The events are positive for a click to the right and negative for a
click to the left. Applications expect the opposite, though.
I suspect this affects a lot more Logitech mice, but these are the only
two I have. I tested this using evtest and a GTK application. A similar
Microsoft Intellimouse I have works correctly.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Added device ids to hid-quriks for detection of keyboards on 4th
generation Macbook Pro and Macbook Air
The naming scheme is consistent with past Apple keyboards in hid-quirks;
as defined by Apple (including device ids) in:
/System/Library/Extensions/AppleUSBTopCase.kext/Contents/PlugIns/AppleUSBTCKeyboard.kext/Co
ntents/Info.plist
Patch was originally posted and tested at:
https://bugs.launchpad.net/mactel-support/+bug/207127
Signed-off-by: Alexandre Karpenko <alexander@comm.utoronto.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix build failure introduced by Alan's ioctl -> unlocked_ioctl
(pushing BKL down to the driver) conversion patch for hiddev.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In this case I simply wrapped it as code review suggests the locking
already terminally broken and I didn't want to make it first. See added
comment
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Push down the BKL. In some cases compat_ioctl already doesn't take the
BKL so we don't either. Some of the locking here seems already dubious
and object lifetimes want documenting
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch renames the existing usb_reset_device in hub.c to
usb_reset_and_verify_device and renames the existing
usb_reset_composite_device to usb_reset_device. Also the new
usb_reset_and_verify_device does't need to be EXPORTED .
The idea of the patch is that external interface driver
should warn the other interfaces' driver of the same
device before and after reseting the usb device. One interface
driver shoud call _old_ usb_reset_composite_device instead of
_old_ usb_reset_device since it can't assume the device contains
only one interface. The _old_ usb_reset_composite_device
is safe for single interface device also. we rename the two
functions to make the change easily.
This patch is under guideline from Alan Stern.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
From the current implementation of usb_reset_composite_device
function, the iface parameter is no longer useful. This function
doesn't do something special for the iface usb_interface,compared
with other interfaces in the usb_device. So remove the parameter
and fix the related caller.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The new iMON LCDs from SoundGraph need to be blacklisted from HID in order to
be used by lirc.
Signed-off-by: Dylan R Semler <dylan.semler@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since 2.6.25 the HID_QUIRK_APPLE_HAS_FN quirk is enabled even for
non-laptop Apple keyboards of the Aluminium series. The USB version of
these don't need Numlock emulation, like the laptop (and Aluminium
Wireless) do, as they have a proper keypad.
This patch splits the Numlock emulation for Apple keyboards in a
different quirk flag, so that it can be enabled for all the keyboards
but the Aluminium USB ones.
If the Numlock emulation is enabled for Aluminium USB keyboards, the
JKL and UIO keys become the numeric pad, and the rest of the keyboard
is disabled, included the key used to disable Numlock.
Additionally, these keyboard should not have a Numlock at all, as the
Numlock key is instead replaced by the 'Clear' key as usual for Apple
USB keyboards.
Signed-off-by: Diego 'Flameeyes' Petteno <flameeyes@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
usb_control_msg() converts arguments to little-endian itself,
doing that in caller means breakage on big-endian boxen.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a typo in report descriptor fixup, which results in improper
substitution and leaving old value in place.
Reported-by: Juha Motorsportcom <juha_motorsportcom@luukku.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Samsung USB remotes (0419:0001) report six keys via standard HID usage pages
(arrow keys, OK, Power). Kernel 2.6.25 maps those to input events (in addition
to the hiddev report). The remaining 43 keys are reported via proprietary HID
report page and therefore by hiddev only.
Applications using hiddev and input device might process the 6 standard keys
twice. To avoid this, the input device will be suppressed for the Samsung
remote with a quirk entry, forcing to use the hiddev device only.
LIRC already contains the proper support.
Signed-off-by: Robert Schedel <r.schedel@yahoo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jeremy Robertson reports that GTCO engineers made a mistake and we don't
need 0x60x GTCO product ids blacklisted.
This mostly reverts dda3fd35, but leaves PID 0x1007 intact.
Reported-by: Jeremy Roberson <jeremy.roberson@einstruction.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is no need to keep a few years old ThrustMaster force-feedback
driver as experimental.
HID_FF is currently marked experimental anyway, so this is even redundant.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a window:
task A task B
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
usb_set_intfdata(intf, NULL);
spin_unlock_irq(&usbhid->inlock);
usb_kill_urb(usbhid->urbin);
usb_kill_urb(usbhid->urbout);
usb_kill_urb(usbhid->urbctrl);
del_timer_sync(&usbhid->io_retry);
cancel_work_sync(&usbhid->reset_work);
if (!hid->open++) {
res = usb_autopm_get_interface(usbhid->intf);
if (res < 0) {
hid->open--;
return -EIO;
}
}
if (hid_start_in(hid))
if (hid->claimed & HID_CLAIMED_INPUT)
hidinput_disconnect(hid);
in which an open() to an already disconnected device will submit an URB
to an undead device. In case disconnect() was called by an ioctl, this'll
oops. Fix by introducing a new flag and checking it in hid_start_in().
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch makes the following needlessly global functions static:
- hid-core.c:hid_input_field()
- usbhid/hid-quirks.c:usbhid_modify_dquirk()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The numbered reports need to be passed properly to hidraw (i.e. with the first
data field indicating the report number), otherwise userspace has no idea
about the identification of the report.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This moves the misplaced rdesc quirk to the place where it belongs.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add force feedback support for Logitech Rumblepad 2.
Tested-By: Edgar Simo <bobbens@gmail.com>
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix these sparse warnings:
.../hid/hid-core.c💯15: warning: incorrect type in assignment (different signedness)
.../hid/hid-core.c💯15: expected signed int [usertype] *value
.../hid/hid-core.c💯15: got unsigned int *<noident>
by unsigned -> s32
.../hid/hid-input-quirks.c:336:10: warning: Using plain integer as NULL pointer
by 0 -> NULL
.../hid/usbhid/hid-core.c:786:46: warning: incorrect type in argument 3 (different signedness)
.../hid/usbhid/hid-core.c:786:46: expected int *max
.../hid/usbhid/hid-core.c:786:46: got unsigned int *<noident>
.../hid/usbhid/hid-core.c:787:47: warning: incorrect type in argument 3 (different signedness)
.../hid/usbhid/hid-core.c:787:47: expected int *max
.../hid/usbhid/hid-core.c:787:47: got unsigned int *<noident>
.../hid/usbhid/hid-core.c:788:48: warning: incorrect type in argument 3 (different signedness)
.../hid/usbhid/hid-core.c:788:48: expected int *max
.../hid/usbhid/hid-core.c:788:48: got unsigned int *<noident>
by int -> unsigned int
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently using debug=1 with hid module prints out all sent and received
reports to the kernel log, while in many cases we only want to see the
report descriptors and hid-input mappings that are printed when a device
is probed.
Add new level debug=2, and only dump the report traffic with that level.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This must be the weirdest failure yet. My external disk stops processing
the storage commands the moment it receives a GET_REPORT. The firmware
does not crash; if I do rmmod hid, then SET-INTERFACE restores normal
operations. Still, I cannot live without the keyboard when I want backup
my files. Adding the NOGET quirk fixes this problem for me.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This device has reports lower logical maximum compared to the real
usages for Zoom+ and Zoom- it emits.
This patch bumps the values in the report descriptor up, and also
adjusts HID_MAX_USAGE accordingly.
Reported-by: Khelben Blackstaff <eye.of.the.8eholder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Microsoft's wireless desktop receiver (Model 1028) has a bug in the report
descriptor -- namely, in four seperate places it uses USAGE_MIN and _MAX when
it quite obviously doesn't intend to.
In other words, it reports that it has pretty much _everything_ in 'consumer'
and 'generic desktop'. And then the X evdev driver believes I have a mouse
with 36 absolute axes and a huge pile of keys and buttons, when I in fact,
should have zero. 255/256 in three of the cases, and 0-1024 in another.
This patch fixes the report descriptor of this device before it enters the HID
parser.
Signed-off-by: Jim Duchek <jim.duchek@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Many vendors highspeed devices give erroneously fullspeed interval value in
endpoint descriptor for interrupt endpoints. This quirk fixes up that by
recalculating the right value for highspeed device.
At the time of hid configuration this quirk calculates which highspeed interval
value gives same interval delay as, or next smaller then, what it would be if
the original value would be interpreted as fullspeed value. In subsequent urbs
that new value is used instead.
Forming the 'hid->name' in usb_hid_config() was moved up to accommodate more
descriptive printk reporting the fixup.
In this patch the quirk is set for one such device: Afatech DVB-T 2 infrared
HID-keyboard. It reports value 16 which means 4,069s in highspeed while
obviously 16ms was intended. In this case quirk calculates new value to be 8
which gives when interpreted as highspeed value 16ms as wanted. The behavior of
the device was verified to be what expected both before and after the patch.
Signed-off-by: Pekka Sarnila <sarnila@adit.fi>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix build failure in hiddev_ioctl with gcc 3.2:
http://bugzilla.kernel.org/show_bug.cgi?id=10121
The trick is to move the handling of ioctls which need to allocate
memory to separate functions.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
USBHID driver only supports relative mode with this tablet so let aiptek
module handle it.
Signed-off-by: Dmitry Guryanov <guryanov@dgap.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
F5 and F6 have no second function printed on them. Thus their definitions have
been removed from the table.
KEY_CYCLEWINDOWS doesn't name the function of Mac OS X' Expose properly and
because we couldn't find a better key code, we decided to use KEY_FN_F4
instead.
We also changed KEY_BACK and KEY_FORWARD, which apply to browser functions, to
KEY_PREVIOUSSONG and KEY_NEXTSONG, since the keys are intended to control a
music player.
Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The hid_input_report() in debug mode of course outputs the report itself, not
the device report descriptor.
Fix this error in comment.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add quirk entry for BADPAD for the NATSU Playstation USB adapter. The
adapter is supported under Linux, but with bad direction detection.
Signed-off-by: Andrew Burton <adb@iinet.net.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) /
(d)) but is perhaps more readable.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We need to blacklist this device, as it should be handled by
ldusb driver.
Reported-by: stephen <stephen.ware@eqware.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The old code (before move) stopped further processing of the
event after it has been already processed by the quirk handler.
The new code didn't propagate the return value properly, and
therefore the processing always proceeded, which was wrong.
This patch fixes it. Pointed out in kernel.org bugzilla #9842
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Adds new GTCO CalComp USB device PIDs to the blacklist.
Signed-off-by: Jeremy A. Roberson <jroberson@gtcocalcomp.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds blacklist entries in hid-quirks.c to let the usbhid driver
ignore the si470x radio devices. They are now handled by the new radio-si470x
driver.
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Logitech Extreme 3D needs NOGET quirk, otherwise it times out at
the time of connect.
Reported-by: Mike Sharov <msharov@softhome.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Following the suggestion of Jonas, this patch maps the special keys of
the MS Presenter 8000 to targets that should allow for better re-mapping
according to individual use cases (i.e. I avoided hard-wiring to
standard keys). This time I also included the last missing key event
(switching back from presentation mode).
The optimal Xmodmap customization for using the Presenter with
OpenOffice now looks like this for me:
keycode 175 = Escape
keycode 179 = F5
keysym XF86Forward = Right
keysym XF86Back = Left
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
0x045e/0x0701 also needs the hid-input mapping quirk established by
quirk_microsoft_presenter_8k().
Reported-by: Jonas Delrue <jonas_delrue@hotmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Samsung USB remotes (0419:0001) are rejected by kernel 2.6.23, because the
report descriptor from the remote contains a 48 bit HID report field. HID 1.11
states: Fields may span at most 4 bytes.
This patch, based on 2.6.23, fixes this by modifying the internal report
descriptor in hid-quirks.c. Additional user space support (e.g. LIRC) is
required to fetch the information from the hiddev interface.
The burden to reconstruct the data is moved into userspace (lirc through hiddev).
There is no need to set HID_QUIRK_HIDDEV quirk, as the device has also output
applications, which trigger the creation of hiddev device automatically.
Signed-off-by: Robert Schedel <r.schedel@yahoo.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We can use the blacklist only if usbhid code is compiled.
Reported-by: jurriaan <thunder7@xs4all.nl>
Cc: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Gretag-Macbeth Huey display colorimeter claims to be an HID device but
isn't. As a result the linux HID device will claim it, preventing FLOSS
software like Argyll CMS from talking to it.
Tested-by: Frederic Crozat <fcrozat@mandriva.com>
Signed-off-by: Nicolas Mailhot <nicolas.mailhot@laposte.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix a panic, by changing
hidinput_mapping_quirks(,, unsigned long *bit,)
to
hidinput_mapping_quirks(,, unsigned long **bit,)
The `bit' in this function is an out parameter.
Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The WARN_ON() in implement() and extract() spit out stacktraces and
a lot of other information that might make users think that there is
something seriously wrong with the system. WARN_ON() should not be
deliberately triggerable by userspace application, which these can be.
Usually this WARN_ON() triggers when hid2hci utility is sending the
data that don't correspond to the device's report descriptor.
Convert these messages to more friendly printk().
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The device is not discoverable, and needs to be poked to set its master, the
Bluetooth device it will try to connect to when the "Home" button is pressed
without a cable plugged in.
Using libusb means disconnecting the device from its driver to get the report
descriptor. Using hiddev, we can poke it without relinquishing control over it,
so when you plug it in, it would still work as a pad.
This could be then used by sixpair program, after it is rewritten to use
hiddev instead of libusb.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This fixes wacom tablets not working if usbmouse is loaded.
Signed-off-by: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This removes ugly macros IS_* to distinguish devices that
need special handling in hid-input, and establish proper
quirks for them.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
BTC 8193 keyboard handles its scrollwheel in very non-standard way.
It produces two non-standard usages for scrolling up and down, in
both cases with postive value equaling to 1. We handle this by temporary
mapping, which we then catch in quirk event handler, and remap to
negative HWHEEL even in order to introduce correct behavior.
Also the button requires special mapping, as it triggers standard-violating
usage code.
Reported in kernel.org bugzilla #9385
Reported-by: Kir Kolyshkin <kir@sacred.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch separates also the hid-input quirks that have to be
applied at the time the event occurs, so that the generic code
handling HUT-compliant devices is not messed up by them too much.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently, the handling of mapping between hid and input for devices
that don't conform to HUT 1.12 specification is very messy -- no per-device
handling, no blacklists, conditions on idVendor and idProduct placed
all over the code.
This patch moves all the device-specific input mapping to a separate
file, and introduces a blacklist-style handling for non-standard
device-specific mappings.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make the Microsoft Wireless Optical Desktop 3.0 work as a mouse.
Microsoft Wireless Optical Desktop 3.0 doesn't properly describe its interface
class. Specifically, since it doesn't mark the second interface as a mouse
(bInterfaceSubclass = 0), it doesn't get HID_QUIRK_NOGET applied to the
interface, and then acts broken when polled.
Signed-off-by: Drew Fisher <drew.m.fisher@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Reuse the quirks from the Cordless Desktop LX500 - stops some of the extra
keys being reported as mouse buttons.
Signed-off-by: Carlos Corbacho <cathectic@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Genius KB-29E has broken report descriptor, which causes some of the
Consumer usages to appear incorrectly as Button usages. We fix it by
fixing the report descriptor before it is being parsed.
Also a few of the keys violate the HUT standard, so they need a special
handling. They currently fall into "Reserved" range as per HUT 1.12.
Reported-by: Szekeres Istvan <szekeres@iii.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Don't directly cast list_head * to foo *, this works only when list
is the first member of struct foo, and we should not make the assumption
how members are ordered in the structure.
i.e. struct *f = (struct *f)pos will work if:
struct foo {
struct list_head list;
int i;
};
but will fail if:
struct foo {
int i;
struct list_head list;
}
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This mouse distinguishes horizontal wheel from vertical by a special "pseudo
event" GenericDesktop.00b8, with values of 0 for vertical and 8 for horizontal
wheel. Because this event is supplied by the parser too late, we need to delay
a wheel event, wait for this one and send either REL_WHEEL or REL_HWHEEL to
input depending on the event value.
Signed-off-by: Pavel Troller <patrol@sinus.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Reuse the existing quirks for Apple laptop USB keyboards.
Signed-off-by: Michel Daenzer <michel@tungstengraphics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Preserve identifiers exposed in build and run time configuration though in
order not to break existing configurations.
This is in preparation for adding support for Apple aluminum USB keyboards.
Signed-off-by: Michel Daenzer <michel@tungstengraphics.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The MS Presenter 8000 bluetooth mouse is a "dual-use" device: If you
press a button on the top, you can turn it around and find special keys
on the other side, useful for presentations. This patch maps those three
bottom-keys that are not already detected to the intended functions. The
magic bottom on the top is mapped to F5 when we switch from mouse to
presenter mode in order to activate the presentation mode in the related
software (e.g. OpenOffice).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hidinput_connect() ignores retval from input_register_device(). Fix it
by properly undoing all the registrations that have been already done,
and return error.
Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
drivers/hid/usbhid/hiddev.c: In function 'hiddev_compat_ioctl':
drivers/hid/usbhid/hiddev.c:746: warning: passing argument 4 of 'hiddev_ioctl' makes
integer from pointer without a cast
Add cast to hiddev_compat_ioctl()
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Changed email address of Johann Deneux (myself)
Also removed CVS tags in comments (no longer using cvs)
Signed-off-by: Johann Deneux <johann.deneux@gmail.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.
The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.
[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get rid of input BIT* duplicate defines
use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <dtor@mail.ru>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: <lenb@kernel.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: <perex@suse.cz>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <vernux@us.ibm.com>
Cc: <malattia@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix bogus copying of data into userspace when HIDIOCGRDESC is issued.
HID-transport layer makes sure that dev->hid->rdesc is not larger than
HID_MAX_DESCRIPTOR_SIZE.
Noticed-by: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It looks like hidraw_connect() is leaking memory in case of failure.
Also it should return -ENOMEM when kzalloc fails.
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hidraw is an interface that is going to obsolete hiddev one
day.
Many userland applications are using libusb instead of using
kernel-provided hiddev interface. This is caused by various
reasons - the HID parser in kernel doesn't handle all the
HID hardware on the planet properly, some devices might require
its own specific quirks/drivers, etc.
hiddev interface tries to do its best to parse all the received
reports properly, and presents only parsed usages into userspace.
This is however often not enough, and that's the reason why
many userland applications just don't use hiddev at all, and
rather use libusb to read raw USB events and process them on
their own.
Another drawback of hiddev is that it is USB-specific.
hidraw interface provides userspace readers with really raw HID
reports, no matter what the low-level transport layer is (USB/BT),
and gives the userland applications all the freedom to process
the HID reports in a way they wish to.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The hiddev driver currently lacks 32bit ioctl compatibility, so
if you're running with a 64bit kernel and 32bit userspace, it won't
work.
I'm pretty sure that the only thing missing is a compat_ioctl
implementation as all structs have fixed size fields.
With this change I can use revoco to configure my MX Revolution mouse.
Signed-off-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This keyboard emits a few usages that are not handled properly by
hid-input.
Changed IS_MS_NEK4K macro to IS_MS_KB to reflect the addition
of another keyboard.
Signed-off-by: Khelben Blackstaff <eye.of.the.8eholder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HUT 1.12 defines Logoff usage 0x19c in Consumer page. There are
keyboards out there emitting this usage code (for example Microsoft
Wireless Laser Keyboard 6000). Add this key so that HID code could
map usages to it.
Signed-off-by: Khelben Blackstaff <eye.of.the.8eholder@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fixes the problem, that Japanese MacBook doesn't recognize some keys
like '\'(yen, or backslash), '|'(pipe), and '_'(underscore).
It is due to that MacBook JIS keyboard (jp106) sends wrong report descriptor.
It saids "logical maximum = 0x65", so Keyboard.0089 is mapped to Key.Unknown,
while it should be accepted as Key.Yen.
Signed-off-by: Tomoya Adachi <adachi@il.is.s.u-tokyo.ac.jp>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- added KERN_DEBUG to output lines
- fixed preffered -> preferred typo
- added const to char *'s
Also, exported symbol hid_resolv_event is unused by the current
kernel tree and perhaps should be removed.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Special keys 1-5 on Microsoft Ergonomic Keyboard were mistakenly
mapped to buttons, which doesn't make a lot of sense. Fix this
mapping to KEY_F{13,18}.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add 0e8f:0003 into the list of devices supported by the hid-plff
force feedback driver. These devices identify themselves as
"GreenAsia Inc. USB Joystick " and can be either adapters or
actual game controllers. The testing was done with a Köng Gaming
gamepad.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use HID_QUIRK_NOGET for the ELO TS2700 touch screen USB HID device in
order to avoid a timeout during initialisation.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The infrared remote receiver found in the SantaRosa MacBookPro
laptops (MacBookPro3,1) need to be forced to expose a HIDDEV
interface (instead of HIDINPUT) so that lirc can access it using
the 'macmini' driver.
The patch below adds the required quirk for forcing the HIDDEV
interface to be activated (HID_QUIRK_HIDDEV) and introduces a new
quirk which forces the HIDINPUT interface to be ignored
(HID_QUIRK_IGNORE_HIDINPUT).
Note that Apple calls this receiver 'IRController4' (info taken
from Apple's driver Info.plist). Older Mac{Book,Mini,Pro}s seem
to all use the 'IRController1' device (USB id 05ac:8240) which
doesn't need those quirks.
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a separate driver cm109 for handling this device.
Signed-off-by: Alfred E. Heggestad <aeh@db.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Current HID layer does not report usage codes to the input layer. This feature
was previously removed, because it caused unnecessary storm of events in cases
of positioning devices, etc.
This patch adds reporting of usage codes as EV_MSC events only for key events.
We issue the EV_MSC event only if the state of the key corresponding to the
given code has changed, so that we don't report usages that are sent in every
report even if the state hasn't changed (for example Shift/Caps Lock/...
states as sent by various keyboards).
This functionality is required at least by KeyTouch in order to provide
convenient means for remapping the usage codes.
Cc: Marvin Raaijmakers <marvin.nospam@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We have to ignore all non-LED usages in output fields if the
report descriptor of the device specifies any. If we don't do
so, the devices which contain the same usages both in input and
output reports with different parameters will mess things up. In
hid-input, we currently care only for the input usages, with exception
for LEDs. All other output usages should be properly handled by
appropriate force-feedback driver.
Fixes auto-calibration for Saitek Cyborg Evo Force joystick.
Reported-by: Renato Golin <rengolin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rework thrustmaster force-feedback module to support devices having
different types of force feedback effects. Add signatures of
Thrustmaster FGT Rumble Force and Thrustmaster FGT Force Feedback
wheels to the list of devices dupported by the module.
Parts of the patch were lifted off a simalar patch by
Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Autosuspend for USB HID devices remains problematic as far as mice
and keyboards are concerned. While I am working on a grand solution,
here's a minimalist patch that works for those devices not continously
in use.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This keyboard emits a few usages that are not handled properly by
hid-input.
The usages from MSVENDOR page are colliding with Chicony Tactical
Pad device, so we have to distinguish in runtime. Ugly ...
Also, the buttons 1-5 have to be handled in a non-standard way,
as they are emitted by the keyboard in a bitfield-like fashion, but
the field is not presented as bit-field by the keyboard. The keys can't
be pressed simultaneously, so the handling we have is correct.
This patch also extends hid_keyboard[] with KPLeftParenthesis and
KPRightParenthesis as defined by Keyboard page in HUT 1.12. The
corresponding usages are also emitted by this keyboard.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If, in usb_hid_configure(), we fail to allocate storage for 'usbhid',
"if (!(usbhid = kzalloc(sizeof(struct usbhid_device), GFP_KERNEL)))",
then we'll jump to the 'fail:' label where we have this code:
usb_free_urb(usbhid->urbin);
usb_free_urb(usbhid->urbout);
usb_free_urb(usbhid->urbctrl);
Since we got here because we couldn't allocate storage for 'usbhid',
what we have here is a NULL pointer dereference - ouch...
This patch solves that little problem by adding a new
'fail_no_usbhid:' label after the problematic calls to
usb_free_urb() and jumps to that one instead, in the problem case.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some of ASUS' notebooks (e.g G Series) include a tiny oled display, which is
attached to an internal USB bus. Unfortunatly the device reports a wrong
DeviceDescriptor and is therefore identified as a HID device...
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds the entire range of Logitech's ProductIDs that are reserved
for their Harmony remotes. The in-kernel HID driver can't do anything with
these, and now there is a GPL user-space application that can handle them:
http://www.sf.net/projects/harmonycontrol
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The IR sensor in some newer Apple computers has no other
driver in the kernel, yet. However, the macmini driver in lirc
requires a HID device for the IR sensor.
Cc: Soeren Sonnenburg <kernel@nn7.de>
Signed-off-by: Tino Keitel <tino.keitel@tikei.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as918) introduces a new USB driver method: reset_resume.
It is called when a device needs to be reset as part of a resume
procedure (whether because of a device quirk or because of the
USB-Persist facility), thereby taking over a role formerly assigned to
the post_reset method. As a consequence, post_reset no longer needs
an argument indicating whether it is being called as part of a
reset-resume. This separation of functions makes the code clearer.
In addition, the pre_reset and post_reset method return types are
changed; they now must return an error code. The return value is
unused at present, but at some later time we may unbind drivers and
re-probe if they encounter an error during reset handling.
The existing pre_reset and post_reset methods in the usbhid,
usb-storage, and hub drivers are updated to match the new
requirements. For usbhid the post_reset routine is also used for
reset_resume (duplicate method pointers); for the other drivers a new
reset_resume routine is added. The change to hub.c looks bigger than
it really is, because mark_children_for_reset_resume() gets moved down
next to the new hub_reset_resume() routine.
A minor change to usb-storage makes the usb_stor_report_bus_reset()
routine acquire the host lock instead of requiring the caller to hold
it already.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch (as886) adds the controversial USB-persist facility,
allowing USB devices to persist across a power loss during system
suspend.
The facility is controlled by a new Kconfig option (with appropriate
warnings about the potential dangers); when the option is off the
behavior will remain the same as it is now. But when the option is
on, people will be able to use suspend-to-disk and keep their USB
filesystems intact -- something particularly valuable for small
machines where the root filesystem is on a USB device!
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are some devices (for example Dell Multimedia Keyboard SK-8135) that have
a volume control knob which generates relative events instead of absolute.
hid-input maps them to ABS_VOLUME. HUT pages don't restrict volume to absolute
values.
Adding REL_VOLUME doesn't seem feasible, nothing knows how to handle it. This
patch translates relative ABS_VOLUME events into appropriate number of series
of VOLUME_UP or VOLUME_DOWN events respectively, so that userspace sees the
correct values in the end.
kernel.org bugzilla 5233
Reported-by: Jochen Eisinger <jochen@penguin-breeder.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This keyboard has wireless mouse which has left, middle, right buttons and
2-dimensional scrolling wheel. Unfornetuly, this wheel reports side scrolling
events and 11 or 12 button events at the same time.
I've wrote a patch to fix this mapping. I'm not sure if this mapping is proper
for buttons, because , for example, there is no entry for "burn cd" in input.h.
The patch also supress 11 and 12 button events from mouse when you scroll the
wheel left and right. With this patch, only side scrolling events are
reported. (This mouse has only 4 buttons and 2D wheel. There is no such
buttons like 11 and 12.)
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When setting the autocentering of PID devices, PID_DIRECTION_ENABLE is not
being explicitely set to 1. This results in autocentering working only on the
vertical axis when this field is preset to 0.
Fix that by setting it explicitely to 1 when preparing the set_effect report
for autocentering spring effect.
Signed-off-by: Diogo Kastrup <dk@bighost.com.br>
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Lately there have been quite a lot of bug reports against broken devices
which require us to fix their report descriptor in the runtime, before it
is passed to the HID parser. Those devices have eaten quite an amount of
our quirks space, which isn't particularly necessary - the quirks are not
needed after the report descriptor is parsed, and they just consume bits.
Therefore this patch separates the quirks for report descriptor fixup, and
moves their handling into separate code. The quirks are then forgotten as
soon as the report descriptor has been parsed.
Module parameter 'rdesc_quirks' is introduced to be able to modify these
quirks in runtime in a similar way to 'quirks' parameter for ordinary HID
quirks.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Devices manufactured by NCR have userspace hiddev-based drivers,
which do all the necessary device querying by themselves. The devices
must not be queried directly by the generic HID driver, as reported by
NCR engineers.
Cc: Petr Ostadal <postadal@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Petalynx Maxter remote control [1] 0x18b1/0x0037 emits 0xfa and 0xfc from
consumer page (reserved in HUT 1.12) for back and more keys. It also emits
a few usages from LOGIVENDOR page, which need adding.
Also, this device has broken report descriptor - the reported maximum is too
low - it doesn't contain the range for 'back' and 'more' keys, so we need to
bump it up before the report descriptor is being parsed.
Besides all this, it also requires NOGET quirk.
This patch does so.
[1] http://www.elmak.pl/index.php?option=com_phpshop&page=shop.browse&category_id=14&ext=opis&lang=en
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When comparing usb vs ps2 / testing the keycodes generated for the easy access
keys on my trust (microsoft compatible) keyboard. I noticed the search key
generated the keycode for find when connected through USB. This lead me to
check the consumer page mappings in hid-input.c . And it turns out the the
mapping for ID 0x221 deviates from the HUT standard document:
http://www.usb.org/developers/devclass_docs/Hut1_12.pdf
Currently it is incorrectly mapped to find, whereas it should be mapped to
search. I also added missing bindings for ID 0x21f, the real find and for
0x222, goto.
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch provides support for the Gameron dual psx adaptor. The
modification is to add the quirk HID_QUIRK_MULTI_INPUT for this
specific USB device.
Signed-off-by: Julien Eyries <jeyries@yahoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch (as914) replaces a call to flush_scheduled_work() with
cancel_work_sync(), in order to help avoid potential deadlocks.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
so that the user can disable all the options in that menu at once
instead of having to disable each option separately.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Microsoft SideWinder GameVoice driver is a trivial device with a few buttons
(0x09 HID usage) and an audio connector, which just forwards the audio input
into oridinary sound card present in the computer.
Despite this fact, the only interface of this device reports itself as a
Telephony/Headset type of HID device. This is apparently incorrect - the device
itself doesn't provide any audio/telephony functionality. This is achieved in
userland application which only needs to receive the button events from the HID
driver.
This patch establishes a new quirk which forces hid-input to claim a device it
will otherwise leave untouched.
Reported-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Chicony KU-0418 (aka Saitek PZ08AU gaming keyboard) has a separate
"tactical pad" with 11 non-functional buttons - they generate usage
codes from 0xff00 (MSVENDOR) usage page. Special case handling for
this keyboard added, so no later clash with MSVENDOR mappings is going
to occur.
Pointed out in bugzilla #7352
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There have been many reports recently about broken HID devices, the
diagnosis of which required users to recompile their kernels in order
to be able to provide debugging output needed for coding a quirk for
a particular device.
This patch makes CONFIG_HID_DEBUG default y if !EMBEDDED and makes it
possible to control debugging output produced by HID code by supplying
'debug=1' module parameter.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a small race window in which hiddev_release() could corrupt the
list that is being processed for new event in hiddev_send_event().
Synchronize the operations over this list.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Provide hooks for getkeycode() and setkeycode() methods to
input_dev.
Signed-off-by: Marvin Raaijmakers <marvin.raaijmakers@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In preparation for struct class_device -> struct device input
core conversion switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Logitech wheel (product id 0xc294) doesn't like to be polled for reports,
otherwise it slows down initialization of this device to ten seconds.
This patch adds HID_QUIRK_NOGET flag for this wheel.
Signed-off-by: Jan Kratochvil <honza@jikos.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Certain versions of Cypress USB barcode readers (this problem is known to
happen at least with PIDs 0xde61 and 0xde64) have report descriptor which
has swapped usage min and usage max tag. This results in HID parser failing
for report descriptor of these devices, as it (wrongly) requires allocating
more usages than HID_MAX_USAGES.
Solve this by walking through the report descriptor for such devices, and swap
the usage min and usage max items (and their values) to be in proper order.
Reported-by: Bret Towe <magnade@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.
Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: (21 commits)
USB HID: don't warn on idVendor == 0
USB HID: add 'quirks' module parameter
USB HID: add support for dynamically-created quirks
USB HID: clarify static quirk handling as squirks
USB HID: encapsulate quirk handling into hid-quirks.c
USB HID: EMS USBII device needs HID_QUIRK_MULTI_INPUT
HID: update copyright and authorship macro
HID: introduce proper zeroing of unused bits in output reports
USB HID: add support for WiseGroup MP-8800 Quad Joypad
USB HID: add FF support for Logitech Force 3D Pro Joystick
USB HID: numlock quirk for dell W7658 keyboard
USB HID: Logitech MX3000 keyboard needs report descriptor quirk
USB HID: extend quirk for Logitech S510 keyboard
USB HID: usbkbd/usbmouse - handle errors when registering devices
USB HID: add QUIRK_HIDDEV for Belkin Flip KVM
HID: enable dead keys on a belkin wireless keyboard
USB HID: Thustmaster firestorm dual power v1 support
USB HID: specify explicit size for hid_blacklist.quirks
USB HID: fix retry & reset logic
USB HID: consolidate vendor/product ids
...
It turns out that there are broken devices out there that incorrectly
report VID/PID as 0x000, see http://lkml.org/lkml/2007/4/27/496
Therefore we should not confuse users by dumping warnings and stacktraces
in such situation. It is not possible to add quirks for such horribly
broken devices, but currently that's not needed.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a 'quirks' module parameter for the usbhid module, so users can
add or modify quirks at module load time.
Signed-off-by: Paul Walmsley <paul@booyaka.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add internal support for dynamically-allocated HID quirks, "dquirks"
(for "dynamic quirks"). Includes several functions to add/modify quirks
from the list. This code is used by the next patch to implement quirk
modification upon module load.
Signed-off-by: Paul Walmsley <paul@booyaka.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Rename existing quirks handling code that operates over a static array
to "squirks" (short for static quirks) to differentiate it from the
dynamically-allocated quirks that will be introduced in the
next patch. Add an accessor function specifically for static quirks,
usbhid_exists_squirk().
Signed-off-by: Paul Walmsley <paul@booyaka.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move the USB_VENDOR* and USB_DEVICE* defines and the hid_blacklist[]
array there from hid-core.c. Add
hid-quirks.c:usbhid_lookup_any_quirks() to return quirk information to
hid-core.c. Convert __u32, __u16 types to u32, u16.
Signed-off-by: Paul Walmsley <paul@booyaka.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add HID_QUIRK_MULTI_INPUT to the EMS USBII (0x0b43/0003) so the kernel detects both joystick
ports properly. Without it you end up with a single joystick node (js0) that combines the
two physical port signals.
Signed-off-by: Paul Zaremba <pez-gpg@treeofice.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some HID devices are looking on the unused bits in the HID reports they
receive. This is violating the specification, but we want to make those
devices work. Well-behaving devices are unaffected, as they don't care
about the unused bits.
If bitsused % 8 is 0 all bits in data[] get used and we don't need to
clear anything. Otherwise (bitsused % 8) bits of the last byte get used.
By shifting 1 for (bitsused % 8) bits and subtracting 1 we create a mask
consisting of (bitsused % 8) ones and remaining zeroes. By ANDing we
clear the upper unused bits.
Signed-off-by: Simon Budig <simon@budig.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds support for WiseGroup Quad Joypad (0x0925/0x8800). The
same quirks as for Dual Joypad (0x0925/0x8866) are needed.
Signed-off-by: Sam Liddicott <sam@liddicott.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for Logitech Force 3D Pro Joystick (0x046d/0xc286)
to hid-lgff driver.
Device ID reported by Richard Bolkey <rbolkey@cs.utexas.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On Dell W7658 keyboard, when BIOS sets NumLock LED on, it survives the
takeover by kernel and thus confuses users.
Eating of an increasibly scarce quirk bit is unfortunate. We do it for safety,
given the history of nervous input devices which crash if anything unusual
happens.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Logitech MX3000 contains report descriptor which doesn't cover usages
above 0x28c, but emits such usages. Report descriptor needs fixing
in the very same way as with receivers shipped with S510 keyboards.
This patch also adds a few mappings for multimedia keys that S510 didn't
emit.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Logitech S510 keyboard is shipped with USB receivers with various product
ids, all need their report descriptor to be fixed. This adds PID 0xc50c.
Reported by Christophe Colombier in kernel.org bugzilla #7352
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add HID_QUIRK_HIDDEV for the Belkin Flip USB KVM, which provides for software
control of switching via a HID class interface. It overloads three HID LED
usages, two of which aren't mapped in the ev_dev input subsection, and which it
doesn't make sense to map. In order to force the creation of a hiddev device
for controlling the Flip, this quirk flag is needed.
Signed-off-by: Daniel P. Engel <dengel@sourceharvest.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Belkin Wireless keyboard, model number F8E849KYBD, USB ID 1020:0006,
FCCID: K7SF8E849KYBD emits usages 0x03a-0x03c from Consumer usage page.
As of HUT v1.12, these are marked as reserved. If any conflict arises
later, the mapping could be made conditional on VID/PID.
Signed-off-by: Chris Clayton <chris2553@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds support for version 1 of Thustmaster firestorm dual power
(0x44f/0xb300).
Signed-off-by: Ronny Peine <RonnyPeine@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Explicitly specify the size of the hid_blacklist quirks member, to guard
against surprises on architectures where unsigned ints aren't 32 bits long.
Signed-off-by: Paul Walmsley <paul@booyaka.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The USB HID driver fails to reset its error-retry timeout when there
has been a long time interval between I/O errors with no successful URB
completions in the meantime. As a result, the very next error would
trigger an immediate reset, even if it was a chance event occurring
long after the previous error.
More USB keyboards and mice than one might expect end up getting I/O
errors. Almost always this results from hardware problems of one sort of
another. For example, people attach the device to a USB extension cable,
which degrades the signal. Or they simply have poor quality cables to
begin with. Or they use a KVM switch which doesn't handle USB messages
correctly. Etc...
There have been reports from several users in which these I/O
errors would occur more or less randomly, at intervals ranging from
seconds to minutes. The error-handling code in hid-core.c was originally
meant for situations where a single outage would persist for a few hundred
ms (electromagnetic interference, for example). It didn't work right when
these more sporadic errors occurred, because of a flaw in the logic
which this patch fixes.
This patch (as873) fixes that oversight.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The vendor/product IDs for the purposes of hid_blacklist got
scathered around the hid-core.c in a rather random way over the
time.
Move all the related definitions at the beginning of the file,
and make them sorted again. Sort also hid_blacklist properly.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Separate usbhid code into dedicated drivers/hid/usbhid directory as
discussed previously with Greg, so that it eases maintaineance process.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Truncated reports should not be discarded since it prevents buggy
devices from communicating with userspace.
Prior to the regession introduced in 2.6.20, a shorter-than-expected
report in hid_input_report() was passed thru after having the missing
bytes cleared. This behavior was established over a few patches in the
2.6.early-teens days, including commit
cd6104572b.
This patch restores the previous behavior and fixes the regression.
Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
HID: zeroing of bytes in output fields is bogus
HID: allocate hid_parser in a proper way
This patch removes bogus zeroing of unused bits in output reports,
introduced in Simon's patch in commit d4ae650a.
According to the specification, any sane device should not care
about values of unused bits.
What is worse, the zeroing is done in a way which is broken and
might clear certain bits in output reports which are actually
_used_ - a device that has multiple fields with one value of
the size 1 bit each might serve as an example of why this is
bogus - the second call of hid_output_report() would clear the
first bit of report, which has already been set up previously.
This patch will break LEDs on SpaceNavigator, because this device
is broken and takes into account the bits which it shouldn't touch.
The quirk for this particular device will be provided in a separate
patch.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid_parser is non-trivially large structure, so it should be allocated
using vmalloc() to avoid unsuccessful allocations when memory fragmentation
is too high.
This structue has a very short life, it's destroyed as soon as the report
descriptor has been completely parsed.
This should be considered a temporary solution, until the hid_parser is
rewritten to consume less memory during report descriptor parsing.
Acked-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Dongle shipped with Logitech DiNovo Edge (0x046d/0xc714) behaves in a weird
non-standard way - it contains multiple reports with the same usage, which
results in remapping of GenericDesktop.X and GenericDesktop.Y usages to
GenericDesktop.Z and GenericDesktop.RX respectively, thus rendering the
touchwheel unusable.
The commit 3506897691 solved this
in a way that it didn't remap certain usages. This however breaks
(at least) middle button of Logic3 / SpectraVideo (0x1267/0x0210),
which in contrary requires the remapping.
To make both of the harware work, allow remapping of these usages again,
and introduce a quirk for Logitech DiNovo Edge "touchwheel" instead - we
disable remapping for key, abs and rel events only for this hardware.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch makes extra keys (F1-F12 in special mode, zooming, rotate, shuffle)
on Logitech S510 keyboard work.
Logitech S510 keyboard sends in report no. 3 keys which are far above the
logical maximum described in descriptor for given report.
This patch introduces a HID quirk for this wireless USB receiver/keyboard
in order to fix the report descriptor before it's being parsed - the logical
maximum and the number of usages is bumped up to 0x104d). The values are in the
"Reserved" area of consumer HUT, so HID_MAX_USAGE had to be changed too.
In addition to proper extracting of the values from report descriptor, proper
HID-input mapping is introduced for them.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Freeing of device->collection is properly done in hid_free_device() (as
this function is supposed to free all the device resources and could be
called from transport specific code, e.g. usb_hid_configure()).
Remove all kfree() calls preceeding the hid_free_device() call.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Every file should include the headers containing the prototypes for
it's global functions.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
d4ae650a90 introduced zeroing of the
last field byte in output reports in order to make sure the unused
bits are set to 0. This is done in a wrong way, resulting in a
wrong bits being zeroed out (not properly shifted by the field offset
in the report). Fix this.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there. Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.
To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.
Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm. I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).
Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_INPUT_DEBUG is non-existent option, so remove anything depending
on it.
Also, as we have new CONFIG_HID_DEBUG, this should be used on places
where ifdef DEBUG was used before.
Suggested by Adrian Bunk.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hidinput_{open,close}() functions do not belong to usbhid, but
to the generic HID layer. Move them, and fix hooks in struct
hid_device, so that now the callbacks are done to transport-specific
_open() functions, but not input_open() functions.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid-debug.h contains a lot of code, and should not therefore
be a header.
This patch moves the code to generic hid layer as .c source, and
introduces CONFIG_HID_DEBUG to conditionally compile it, instead
of playing with #define DEBUG and including hid-debug.h.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add new quirk HID_QUIRK_SKIP_OUTPUT_REPORTS to skip output reports
when enumerating reports on a hid-input device. Add this quirk and
HID_QUIRK_MULTI_INPUT to 0810:0001.
PantherLord Twin USB Joystick, 0810:0001 has separate input reports
for 2 distinct game controllers in the same interface, so it needs
HID_QUIRK_MULTI_INPUT. However, the device also contains one output
report per controller which is used to control the force feedback
function, and we do not want those to appear as separate input
devices as well. The simplest approach seems to be to add a quirk to
skip output reports on 0810:0001, and allow the force feedback
driver to handle those.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The apple powerbook people are used to switch the pb_fnmode
setting at runtime through writing to sysfs, altering the
module parameter value. This was broken for them in 2.6.20-rc1
when generic HID layer was introduced, as the pb_fnmode flag
was made per-hiddevice, instead of global variable.
This patch moves the pb_fnmode module parameter from usbhid module
to hid module, but apart from that retains backward compatibility
with respect to changing the mode through sysfs.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Patch adds entries to the HID consumer page for the Firefly
Mini IR remote control
Signed-off-by: Simon Bennett <simon@levanta.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid_free_device() doesn't free device->collection (but it does
free device->rdesc and device itself). This imposes memory leak.
Fix it.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is no reason for generic hid-input.c to include usb-specific
input.h.
As a sideeffect, this also fixes warning of redefinition of dbg()
macro, when hid-input.c is compiled with DEBUG (as there is a clash
between dbg() from hid.h and usb/input.h).
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid/hid-core.c references 'len' variable when DEBUG_DATA is defined,
but the actual name of the variable is 'size'. Fix it.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This change introduces a mapping for LED indicators between the HID
specification and the Linux input subsystem. The previous code properly
mapped the LEDs relevant for Keyboards, but garbeled the remaining ones.
With this change all LED enums from the input system get mapped to more
or less equivalent LED numbers from the HID specification.
This patch also ensures that the unused bits in a HID report to the
device are zeroed out. This makes the 3Dconnexion SpaceNavigator fully
usable with the linux input system.
Signed-off-by: Simon Budig <simon@budig.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
DRIVER_DESC macro is wrong in drivers/hid/hid-core.c. Its value
is legacy from original usb+hid code and clashes with current
usbhid implementation. Fix it.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
mousepoll parameter makes no sense for generic HID code. It
belongs to (and is implemented by) usbhid. This is also where
all users are expecting it.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch fixes mappings for the Logitech USB BT receiver that
ships along with Logitech's DiNovo Edge keyboard. Without these
changes, the "touchwheel" does not work as intended (a mouse)
Signed-off-by: Adrian Drzewiecki <adriand@drze.net>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The help text for CONFIG_HID might imply for someone that
it's necessary to enable it for any keyboard or mouse
attached to the system. This is obviously not correct, so
fix it to avoid confusing the users.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID it defaults to 'y'. When you have input deselected, this
causes the kernel to fail to link.
Fix it by making it depend on INPUT.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On USB keyboards lots of hot/internet keys are not working. This patch
adds support for a number of keys from the USB HID Usage Table
(http://www.usb.org/developers/devclass_docs/Hut1_12.pdf).
It also adds several new key codes. Most of them are used on real world
keyboards I know. I added some others (KEY_+ EDITOR, GRAPHICSEDITOR, DATABASE,
NEWS, VOICEMAIL, VIDEOPHONE) to avoid "holes".
I also added KEY_ZOOMRESET as it is possible to have a inet keyboard and a
remote control in parallel and it makes sense to have them behave differently.
Signed-off-by: Florian Festi <ffesti@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This modifies Makefiles and Kconfigs to properly reflect the creation of
generic HID layer.
It also removes the dependency of BROKEN, which was introduced by the
first patch in series (see the comment). Also updates credits.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pb_fnmode parameter has to be passed to usbhid, both for compatibility reasons
and also because it logically belongs there.
Also removes empty hid-input.c file in drivers/usb/input.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
hid_input_report() was needlessly USB-specific in USB HID. This patch
makes the function independent of HID implementation and fixes all
the current users. Bluetooth patches comply with this prototype.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- hiddev is USB-only (agreed with Marcel Holtmann that Bluetooth currently
doesn't need it, and future planned interface (rawhid) will be more flexible
and usable)
- both HID and USB-hid can be now compiled as modules (wasn't possible before
hiddev was fully separated from generic HID layer)
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- 'dev' in struct hid_device changed from struct usb_device to
struct device and fixed all the users
- renamed functions which are part of USB HID API from 'hid_*' to
'usbhid_*'
- force feedback initialization moved from common part into USB-specific
driver
- added usbhid.h header for USB HID API users
- removed USB-specific fields from struct hid_device and moved them
to new usbhid_device, which is pointed to by hid_device->driver_data
- fixed all USB users to use this new structure
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The "big main" split of USB HID code into generic HID code and
USB-transport specific HID handling.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
