Commit Graph

4233 Commits

Author SHA1 Message Date
Vinicius Costa Gomes
34918cd71b Bluetooth: Add new structures for supporting SM key distribution
We need these changes because SMP keys may have more information
associated with them, for example, in the LTK case, it has an
encrypted diversifier (ediv) and a random number (rand).

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-08 17:36:25 -03:00
Vinicius Costa Gomes
7034b911af Bluetooth: Add support for SMP phase 3 (key distribution)
This adds support for generating and distributing all the keys
specified in the third phase of SMP.

This will make possible to re-establish secure connections, resolve
private addresses and sign commands.

For now, the values generated are random.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-08 17:07:43 -03:00
Mat Martineau
fadd192e81 Bluetooth: Remove L2CAP busy queue
The ERTM receive buffer is now handled in a way that does not require
the busy queue and the associated polling code.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-07 15:29:06 -03:00
Mat Martineau
e328140fda Bluetooth: Use event-driven approach for handling ERTM receive buffer
This change moves most L2CAP ERTM receive buffer handling out of the
L2CAP core and in to the socket code.  It's up to the higher layer
(the socket code, in this case) to tell the core when its buffer is
full or has space available.  The recv op should always accept
incoming ERTM data or else the connection will go down.

Within the socket layer, an skb that does not fit in the socket
receive buffer will be temporarily stored.  When the socket is read
from, that skb will be placed in the receive buffer if possible.  Once
adequate buffer space becomes available, the L2CAP core is informed
and the ERTM local busy state is cleared.

Receive buffer management for non-ERTM modes is unchanged.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-07 15:28:56 -03:00
Andre Guedes
eead27da60 Bluetooth: Add lmp_host_le_capable() macro
Since we have the extended LMP features properly implemented, we
should check the LMP_HOST_LE bit to know if the host supports LE.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-06 19:10:41 -03:00
Andre Guedes
e6100a2541 Bluetooth: Add enable_le module parameter
This patch adds a new module parameter to enable/disable host LE
support. By default host LE support is disabled.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-06 19:10:37 -03:00
Andre Guedes
f9b49306dc Bluetooth: Write LE Host Supported command
This patch adds a handler to Write LE Host Supported command complete
events. Once this commands has completed successfully, we should
read the extended LMP features and update the extfeatures field in
hci_dev.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-06 19:10:32 -03:00
Andre Guedes
971e3a4bbc Bluetooth: Add extfeatures to struct hci_dev
This new field holds the extended LMP features value. Some LE
mechanism such as discovery procedure needs to read the extended
LMP features to work properly.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-06 19:10:27 -03:00
Gustavo F. Padovan
f8c1fbdb76 Bluetooth: Clean up unused struct hci_conn items
priv and lock are never used

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-07-01 16:10:06 -03:00
Joe Perches
e1447d8d8d Bluetooth: Add bt_printk
Add a local logging function to emit bluetooth specific
messages.  Using vsprintf extension %pV saves code/text
space.

Convert the current BT_INFO and BT_ERR macros to use bt_printk.
Remove __func__ from BT_ERR macro (and the uses).
Prefix "Bluetooth: " to BT_ERR
Remove __func__ from BT_DBG as function can be prefixed when
using dynamic_debug.

With allyesconfig:

   text    data     bss     dec     hex filename
 129956    8632   36096  174684   2aa5c drivers/bluetooth/built-in.o.new2
 134402    8632   36064  179098   2bb9a drivers/bluetooth/built-in.o.old
  14778    1012    3408   19198    4afe net/bluetooth/bnep/built-in.o.new2
  15067    1012    3408   19487    4c1f net/bluetooth/bnep/built-in.o.old
 346595   19163   86080  451838   6e4fe net/bluetooth/built-in.o.new2
 353751   19163   86064  458978   700e2 net/bluetooth/built-in.o.old
  18483    1172    4264   23919    5d6f net/bluetooth/cmtp/built-in.o.new2
  18927    1172    4264   24363    5f2b net/bluetooth/cmtp/built-in.o.old
  19237    1172    5152   25561    63d9 net/bluetooth/hidp/built-in.o.new2
  19581    1172    5152   25905    6531 net/bluetooth/hidp/built-in.o.old
  59461    3884   14464   77809   12ff1 net/bluetooth/rfcomm/built-in.o.new2
  61206    3884   14464   79554   136c2 net/bluetooth/rfcomm/built-in.o.old

with x86 defconfig (and just bluetooth):

$ size net/bluetooth/built-in.o.defconfig.*
   text    data     bss     dec     hex filename
  66358     933     100   67391   1073f net/bluetooth/built-in.o.defconfig.new
  66643     933     100   67676   1085c net/bluetooth/built-in.o.defconfig.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-30 19:17:12 -03:00
Joe Perches
e175072f37 Bluetooth: Rename function bt_err to bt_to_errno
Make it easier to use more normal logging styles later.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-30 18:44:08 -03:00
Johannes Berg
670dc2833d netlink: advertise incomplete dumps
Consider the following situation:
 * a dump that would show 8 entries, four in the first
   round, and four in the second
 * between the first and second rounds, 6 entries are
   removed
 * now the second round will not show any entry, and
   even if there is a sequence/generation counter the
   application will not know

To solve this problem, add a new flag NLM_F_DUMP_INTR
to the netlink header that indicates the dump wasn't
consistent, this flag can also be set on the MSG_DONE
message that terminates the dump, and as such above
situation can be detected.

To achieve this, add a sequence counter to the netlink
callback struct. Of course, netlink code still needs
to use this new functionality. The correct way to do
that is to always set cb->seq when a dumpit callback
is invoked and call nl_dump_check_consistent() for
each new message. The core code will also call this
function for the final MSG_DONE message.

To make it usable with generic netlink, a new function
genlmsg_nlhdr() is needed to obtain the netlink header
from the genetlink user header.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-22 16:09:45 -04:00
John W. Linville
1c1236e3af Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6 2011-06-22 16:06:58 -04:00
Eliad Peller
b856439b1b mac80211: add cancel_hw_scan() callback
When suspending, __ieee80211_suspend() calls ieee80211_scan_cancel(),
which will only cancel sw scan. In order to cancel hw scan, the
low-level driver has to cancel it in the suspend() callback. however,
this is too late, as a new scan_work will be enqueued (while the driver
is going into suspend).

Add a new cancel_hw_scan() callback, asking the driver to cancel an
active hw scan, and call it in ieee80211_scan_cancel().

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-17 14:22:18 -04:00
Gustavo F. Padovan
e2ab43536c Bluetooth: Use bit operations on conn_state
Instead of setting bits manually we use set_bit, test_bit, etc.
Also remove L2CAP_ prefix from macros.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16 18:57:15 -03:00
Gustavo F. Padovan
c1360a1cf3 Bluetooth: use bit operation on conf_state
Instead of making the bit operations manually, we now use set_bit,
test_bit, etc.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16 18:57:14 -03:00
Antti Julku
7fbec224cf Bluetooth: Add blacklisting support for mgmt interface
Management interface commands for blocking and unblocking devices.

Signed-off-by: Antti Julku <antti.julku@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16 18:57:04 -03:00
Antti Julku
b2a66aad86 Bluetooth: Move blacklisting functions to hci_core
Move blacklisting functions to hci_core.c, so that they can
be used by both management interface and hci socket interface.

Signed-off-by: Antti Julku <antti.julku@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16 15:19:41 -03:00
Vinicius Costa Gomes
3158c50c33 Bluetooth: Add key size checks for SMP
This patch implements a check in smp cmd pairing request and pairing
response to verify if encryption key maximum size is compatible in both
slave and master when SMP Pairing is requested. Keys are also masked to
the correct negotiated size.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-14 14:54:10 -03:00
Vinicius Costa Gomes
5d3de7df18 Bluetooth: Add support for SMP timeout
This patch adds support for disconnecting the link when SMP procedure
takes more than 30 seconds.

SMP begins when either the Pairing Request command is sent or the
Pairing Response is received, and it ends when the link is encrypted
(or terminated). Vol 3, Part H Section 3.4.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-14 14:54:05 -03:00
Vinicius Costa Gomes
88167aed0d Bluetooth: Update the security level when link is encrypted
If the pending security level is greater than the current security
level and the link is now encrypted, we should update the link
security level.

This is only useful for LE links, when the only event generated
when SMP is sucessful in the Encrypt Change event.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 16:05:35 -03:00
Vinicius Costa Gomes
a7a595f675 Bluetooth: Add support for LE Start Encryption
This adds support for starting SMP Phase 2 Encryption, when the initial
SMP negotiation is successful. This adds the LE Start Encryption and LE
Long Term Key Request commands and related events.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 15:48:25 -03:00
Anderson Briglia
7d24ddcc11 Bluetooth: Add SMP confirmation checks methods
This patch includes support for generating and sending the random value
used to produce the confirmation value.

Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 15:48:25 -03:00
Anderson Briglia
f01ead3157 Bluetooth: Add SMP confirmation structs
This patch adds initial support for verifying the confirmation value
that the remote side has sent.

Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 15:48:24 -03:00
Vinicius Costa Gomes
3a0259bb80 Bluetooth: Add support for using the crypto subsystem
This will allow using the crypto subsystem for encrypting data. As SMP
(Security Manager Protocol) is implemented almost entirely on the host
side and the crypto module already implements the needed methods
(AES-128), it makes sense to use it.

There's now a new module option to enable/disable SMP support.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 15:48:22 -03:00
Anderson Briglia
88ba43b662 Bluetooth: Add simple SMP pairing negotiation
This implementation only exchanges SMP messages between the Host and the
Remote. No keys are being generated. TK and STK generation will be
provided in further patches.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 15:48:22 -03:00
Anderson Briglia
eb492e0169 Bluetooth: Implement the first SMP commands
These simple commands will allow the SMP procedure to be started
and terminated with a not supported error. This is the first step
toward something useful.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 15:11:55 -03:00
Gustavo F. Padovan
1a09bcb97c Bluetooth: keep reference if any ERTM timer is enabled
ERTM use the generic L2CAP timer functions to keep a reference to the
channel. This is useful for avoiding crashes.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 14:55:33 -03:00
Gustavo F. Padovan
c9b6667537 Bluetooth: Make timer functions generic
We now plan to use l2cap_set_timer and l2cap_clear_timer in ERTM timers.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 14:55:33 -03:00
Gustavo F. Padovan
71ba0e569b Bluetooth: Add refcnt to struct l2cap_chan
struct l2cap_chan has now its own refcnt that is compatible with the
socket refcnt, i.e., we won't see sk_refcnt = 0 and chan->refcnt > 0.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 14:55:33 -03:00
Gustavo F. Padovan
89bc500e41 Bluetooth: Add state tracking to struct l2cap_chan
Now socket state is tracked by struct sock and channel state is tracked by
chan->state. At this point both says the same, but this is going to change
when we add AMP Support for example.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 14:55:33 -03:00
Gustavo F. Padovan
ba3bd0ee39 Bluetooth: add close() callback to l2cap_chan_ops
close() calls l2cap_sock_kill() on l2cap_sock.c

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 14:55:33 -03:00
Gustavo F. Padovan
2307049422 Bluetooth: add recv() callback to l2cap_chan_ops
This abstracts the call to sock_queue_recv_skb() into
l2cap_chan_ops->recv().

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 14:55:33 -03:00
Gustavo F. Padovan
80808e431e Bluetooth: Add l2cap_chan_ops abstraction
Add an abstraction layer between L2CAP core and its users (only
l2cap_sock.c now). The first function implemented is new_connection() that
replaces calls to l2cap_sock_alloc() in l2cap_core.c

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13 14:55:32 -03:00
Eliad Peller
1d34d108e0 mac80211: add ieee80211_get_operstate() function
Add ieee80211_get_operstate() function to get the operstate
of the netdevice.

This is needed for drivers that need to know when the interface
is IF_OPER_UP (e.g. wl12xx), and block notifiers can't be used
(e.g. because the interface is already IF_OPER_UP, like after
resuming from suspend)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-10 14:26:50 -04:00
Waldemar Rymarkiewicz
5a9d0a3ffb Bluetooth: Clean up some code style issues
Fix lines longer than 80 chars in length.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09 16:33:28 -03:00
Jaikumar Ganesh
14b12d0b98 Bluetooth: Add BT_POWER L2CAP socket option.
Add BT_POWER socket option used to control the power
characteristics of the underlying ACL link. When the remote end
has put the link in sniff mode and the host stack wants to send
data we need need to explicitly exit sniff mode to work well with
certain devices (For example, A2DP on Plantronics Voyager 855).
However, this causes problems with HID devices.

Hence, moving into active mode when sending data, irrespective
of who set the sniff mode has been made as a socket option. By
default, we will move into active mode. HID devices can set the
L2CAP socket option to prevent this from happening.

Currently, this has been implemented for L2CAP sockets. This has been
tested with incoming and outgoing L2CAP sockets for HID and A2DP.

Based on discussions on linux-bluetooth and patches submitted by
Andrei Emeltchenko.

Signed-off-by: Jaikumar Ganesh <jaikumar@google.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:19 -03:00
Andre Guedes
29b7988a23 Bluetooth: Add 'dst_type' field to struct hci_conn
This patch adds a new field (dst_type) to the struct hci_conn which
holds the type of the destination address (bdaddr_t dst). This
approach is needed in order to use the struct hci_conn as an
abstraction of LE connections in HCI Layer. For non-LE this field
is ignored.

This patch also set properly the 'dst_type' field after initializing
LE hci_conn structures.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:18 -03:00
Waldemar Rymarkiewicz
19f8def031 Bluetooth: Fix auth_complete_evt for legacy units
Legacy devices don't re-authenticate the link properly if a link key
already exists.  Thus, don't update sec_level for this case even if
hci_auth_complete_evt indicates success. Otherwise the sec_level will
not reflect a real security on the link.

Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:18 -03:00
Andre Guedes
3581508571 Bluetooth: Advertising entries lifetime
This patch adds a timer to clear 'adv_entries' after three minutes.

After some amount of time, the advertising entries cached during
the last LE scan should be considered expired and they should be
removed from the advertising cache.

It was chosen a three minutes timeout as an initial attempt. This
value might change in future.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:17 -03:00
Andre Guedes
eb9d91f5ae Bluetooth: Clear advertising cache before scanning
The LE advertising cache should be cleared before performing a LE
scanning. This will force the cache to contain only fresh advertising
entries.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:17 -03:00
Andre Guedes
76c8686f88 Bluetooth: LE advertising cache
This patch implements the LE advertising cache. It stores sensitive
information (bdaddr and bdaddr_type so far) gathered from LE
advertising report events.

Only advertising entries from connectables devices are added to the
cache.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:17 -03:00
Anderson Briglia
57a56fd41b Bluetooth: Add advertising report meta event structs
This patch adds definitions and a new struct for Advertising Report
Event from LE and Dual Mode controllers.

Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:17 -03:00
Gustavo F. Padovan
0f85272496 Bluetooth: Rename __l2cap_chan_close() to l2cap_chan_close()
To make it consistent with the rest of the API.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:16 -03:00
Gustavo F. Padovan
500698d3fd Bluetooth: Remove export of l2cap_chan_clear_timer()
The call to l2cap_chan_clear_timer() is not really needed in l2cap_sock.c.
This patch also adds a call to l2cap_chan_clear_timer() to the only place
in __l2cap_sock_close() that wasn't calling it. It's safe call it there
because l2cap_chan_clear_timer() check first for timer_peding().

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:16 -03:00
Gustavo F. Padovan
ab07801d28 Bluetooth: create channel timer to replace sk_timer
The new timer does not belong to struct sock, tought it still touch some
sock things, but this will be sorted out soon.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:16 -03:00
Gustavo F. Padovan
715ec005cd Bluetooth: Add chan->chan_type struct member
chan_type says if our chan is raw(direclty access to HCI),
connection less or connection oriented.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:16 -03:00
Gustavo F. Padovan
9a91a04a95 Bluetooth: Create l2cap_chan_send()
This move all the sending logic to l2cap_core.c, but we still have a
socket dependence there, struct msghdr. It will be removed in some of the
further commits.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:16 -03:00
Gustavo F. Padovan
4519de9a04 Bluetooth: Create __l2cap_chan_close()
This is actually __l2cap_sock_close() renamed to __l2cap_chan_close().
At a first look it may not make sense, but with the further cleanups that
will come it will.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08 16:58:16 -03:00
Shahar Levi
f41ccd71d8 mac80211: Stop BA session event from device
Some devices support BT/WLAN co-existence algorigthms.
In order not to harm the system performance and user experience, the device
requests not to allow any RX BA session and tear down existing RX BA sessions
based on system constraints such as periodic BT activity that needs to limit
WLAN activity (eg.SCO or A2DP).
In such cases, the intention is to limit the duration of the RX PPDU and
therefore prevent the peer device to use A-MPDU aggregation.

Adding ieee80211_stop_rx_ba_session() callback
that can be used by the driver to stop existing BA sessions.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07 14:41:36 -04:00