Commit Graph

25 Commits

Author SHA1 Message Date
Prarit Bhargava
5fda1bd5b8 mm: notifier_from_errno() cleanup
While looking at some other notifier callbacks I noticed this code could
use a simple cleanup.

notifier_from_errno() no longer needs the if (ret)/else conditional.  That
same conditional is now done in notifier_from_errno().

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:01 -07:00
Catalin Marinas
7952f98818 kmemleak: Annotate false positive in init_section_page_cgroup()
The pointer to the page_cgroup table allocated in
init_section_page_cgroup() is stored in section->page_cgroup as (base -
pfn). Since this value does not point to the beginning or inside the
allocated memory block, kmemleak reports a false positive.

This was reported in bugzilla.kernel.org as #16297.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Adrien Dessemond <adrien.dessemond@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Andrew Morton <akpm@linux-foundation.org>
2010-07-19 11:54:14 +01:00
KAMEZAWA Hiroyuki
e9e58a4ec3 memcg: avoid use cmpxchg in swap cgroup maintainance
swap_cgroup uses 2bytes data and uses cmpxchg in a new operation.  2byte
cmpxchg/xchg is not available on some archs.  This patch replaces
cmpxchg/xchg with operations under lock.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reported-by: Sachin Sant <sachinp@in.ibm.com> wrote:
Acked-by: Balbir Singh <balbir@in.ibm.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-17 18:43:47 -07:00
Daisuke Nishimura
024914477e memcg: move charges of anonymous swap
This patch is another core part of this move-charge-at-task-migration
feature.  It enables moving charges of anonymous swaps.

To move the charge of swap, we need to exchange swap_cgroup's record.

In current implementation, swap_cgroup's record is protected by:

  - page lock: if the entry is on swap cache.
  - swap_lock: if the entry is not on swap cache.

This works well in usual swap-in/out activity.

But this behavior make the feature of moving swap charge check many
conditions to exchange swap_cgroup's record safely.

So I changed modification of swap_cgroup's recored(swap_cgroup_record())
to use xchg, and define a new function to cmpxchg swap_cgroup's record.

This patch also enables moving charge of non pte_present but not uncharged
swap caches, which can be exist on swap-out path, by getting the target
pages via find_get_page() as do_mincore() does.

[kosaki.motohiro@jp.fujitsu.com: fix ia64 build]
[akpm@linux-foundation.org: fix typos]
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:36 -08:00
Shaohua Li
f52407ce2d memory hotplug: alloc page from other node in memory online
To initialize hotadded node, some pages are allocated.  At that time, the
node hasn't memory, this makes the allocation always fail.  In such case,
let's allocate pages from other nodes.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Yakui Zhao <yakui.zhao@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:26 -07:00
Li Zefan
338c843108 memcg: remove some redundant checks
We don't need to check do_swap_account in the case that the function which
checks do_swap_account will never get called if do_swap_account == 0.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:47 -07:00
Balbir Singh
d69b042f3d memcg: add file-based RSS accounting
Add file RSS tracking per memory cgroup

We currently don't track file RSS, the RSS we report is actually anon RSS.
 All the file mapped pages, come in through the page cache and get
accounted there.  This patch adds support for accounting file RSS pages.
It should

1. Help improve the metrics reported by the memory resource controller
2. Will form the basis for a future shared memory accounting heuristic
   that has been proposed by Kamezawa.

Unfortunately, we cannot rename the existing "rss" keyword used in
memory.stat to "anon_rss".  We however, add "mapped_file" data and hope to
educate the end user through documentation.

[hugh.dickins@tiscali.co.uk: fix mem_cgroup_update_mapped_file_stat oops]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.cn>
Cc: Paul Menage <menage@google.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:47 -07:00
Randy Dunlap
8ca739e369 cgroups: make messages more readable
Fix some cgroup messages to read better.
Update MAINTAINERS to include mm/*cgroup* files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:46 -07:00
KAMEZAWA Hiroyuki
ca371c0d7e memcg: fix page_cgroup fatal error in FLATMEM
Now, SLAB is configured in very early stage and it can be used in
init routine now.

But replacing alloc_bootmem() in FLAT/DISCONTIGMEM's page_cgroup()
initialization breaks the allocation, now.
(Works well in SPARSEMEM case...it supports MEMORY_HOTPLUG and
 size of page_cgroup is in reasonable size (< 1 << MAX_ORDER.)

This patch revive FLATMEM+memory cgroup by using alloc_bootmem.

In future,
We stop to support FLATMEM (if no users) or rewrite codes for flatmem
completely.But this will adds more messy codes and overheads.

Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-12 11:00:54 +03:00
Yinghai Lu
959982fee4 memcg: don't use bootmem allocator in setup code
The bootmem allocator is no longer available for page_cgroup_init() because we
set up the kernel slab allocator much earlier now.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-06-11 19:27:10 +03:00
KAMEZAWA Hiroyuki
627991a20b memcg: remove redundant message at swapon
It's pointed out that swap_cgroup's message at swapon() is nonsense.
Because

  * It can be calculated very easily if all necessary information is
    written in Kconfig.

  * It's not necessary to annoying people at every swapon().

In other view, now, memory usage per swp_entry is reduced to 2bytes from
8bytes(64bit) and I think it's reasonably small.

Reported-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:56 -07:00
KAMEZAWA Hiroyuki
a3b2d69269 cgroups: use css id in swap cgroup for saving memory v5
Try to use CSS ID for records in swap_cgroup.  By this, on 64bit machine,
size of swap_cgroup goes down to 2 bytes from 8bytes.

This means, when 2GB of swap is equipped, (assume the page size is 4096bytes)

	From size of swap_cgroup = 2G/4k * 8 = 4Mbytes.
	To   size of swap_cgroup = 2G/4k * 2 = 1Mbytes.

Reduction is large.  Of course, there are trade-offs.  This CSS ID will
add overhead to swap-in/swap-out/swap-free.

But in general,
  - swap is a resource which the user tend to avoid use.
  - If swap is never used, swap_cgroup area is not used.
  - Reading traditional manuals, size of swap should be proportional to
    size of memory. Memory size of machine is increasing now.

I think reducing size of swap_cgroup makes sense.

Note:
  - ID->CSS lookup routine has no locks, it's under RCU-Read-Side.
  - memcg can be obsolete at rmdir() but not freed while refcnt from
    swap_cgroup is available.

Changelog v4->v5:
 - reworked on to memcg-charge-swapcache-to-proper-memcg.patch
Changlog ->v4:
 - fixed not configured case.
 - deleted unnecessary comments.
 - fixed NULL pointer bug.
 - fixed message in dmesg.

[nishimura@mxp.nes.nec.co.jp: css_tryget can be called twice in !PageCgroupUsed case]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:56 -07:00
KAMEZAWA Hiroyuki
2e9c237243 memcg: use __GFP_NOWARN in page cgroup allocation
page_cgroup's page allocation at init/memory hotplug uses kmalloc() and
vmalloc(). If kmalloc() failes, vmalloc() is used.

This is because vmalloc() is very limited resource on 32bit systems.
We want to use kmalloc() first.

But in this kind of call, __GFP_NOWARN should be specified.

Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-11 14:25:35 -08:00
Hirokazu Takahashi
f8d6654226 memcg: add mem_cgroup_disabled()
We check mem_cgroup is disabled or not by checking
mem_cgroup_subsys.disabled.  I think it has more references than expected,
now.

replacing
   if (mem_cgroup_subsys.disabled)
with
   if (mem_cgroup_disabled())

give us good look, I think.

[kamezawa.hiroyu@jp.fujitsu.com: fix typo]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:05 -08:00
KAMEZAWA Hiroyuki
08e552c69c memcg: synchronized LRU
A big patch for changing memcg's LRU semantics.

Now,
  - page_cgroup is linked to mem_cgroup's its own LRU (per zone).

  - LRU of page_cgroup is not synchronous with global LRU.

  - page and page_cgroup is one-to-one and statically allocated.

  - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as
    - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc);

  - SwapCache is handled.

And, when we handle LRU list of page_cgroup, we do following.

	pc = lookup_page_cgroup(page);
	lock_page_cgroup(pc); .....................(1)
	mz = page_cgroup_zoneinfo(pc);
	spin_lock(&mz->lru_lock);
	.....add to LRU
	spin_unlock(&mz->lru_lock);
	unlock_page_cgroup(pc);

But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock.
So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct.

This is a trial to remove this dirty nesting of locks.
This patch changes mz->lru_lock to be zone->lru_lock.
Then, above sequence will be written as

        spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU
	mem_cgroup_add/remove/etc_lru() {
		pc = lookup_page_cgroup(page);
		mz = page_cgroup_zoneinfo(pc);
		if (PageCgroupUsed(pc)) {
			....add to LRU
		}
        spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU

This is much simpler.
(*) We're safe even if we don't take lock_page_cgroup(pc). Because..
    1. When pc->mem_cgroup can be modified.
       - at charge.
       - at account_move().
    2. at charge
       the PCG_USED bit is not set before pc->mem_cgroup is fixed.
    3. at account_move()
       the page is isolated and not on LRU.

Pros.
  - easy for maintenance.
  - memcg can make use of laziness of pagevec.
  - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup.
  - LRU status of memcg will be synchronized with global LRU's one.
  - # of locks are reduced.
  - account_move() is simplified very much.
Cons.
  - may increase cost of LRU rotation.
    (no impact if memcg is not configured.)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:05 -08:00
KAMEZAWA Hiroyuki
27a7faa077 memcg: swap cgroup for remembering usage
For accounting swap, we need a record per swap entry, at least.

This patch adds following function.
  - swap_cgroup_swapon() .... called from swapon
  - swap_cgroup_swapoff() ... called at the end of swapoff.

  - swap_cgroup_record() .... record information of swap entry.
  - swap_cgroup_lookup() .... lookup information of swap entry.

This patch just implements "how to record information".  No actual method
for limit the usage of swap.  These routine uses flat table to record and
lookup.  "wise" lookup system like radix-tree requires requires memory
allocation at new records but swap-out is usually called under memory
shortage (or memcg hits limit.) So, I used static allocation.  (maybe
dynamic allocation is not very hard but it adds additional memory
allocation in memory shortage path.)

Note1: In this, we use pointer to record information and this means
      8bytes per swap entry. I think we can reduce this when we
      create "id of cgroup" in the range of 0-65535 or 0-255.

Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: Hugh Dickins <hugh@veritas.com>
Reported-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelianov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:05 -08:00
Fernando Luis Vazquez Cao
0753b0ef3b memcg: do not recalculate section unnecessarily in init_section_page_cgroup
In init_section_page_cgroup() the section a given pfn belongs to is
calculated at the top of the function and, despite the fact that the
pfn/section correspondence does not change, it is recalculated further
down the same function.  By computing this just once and reusing that
value we save some bytes in the object file and do not waste CPU cycles.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:04 -08:00
KOSAKI Motohiro
feb1669488 mm: make init_section_page_cgroup() static
Sparse output following warning.

mm/page_cgroup.c💯15: warning: symbol 'init_section_page_cgroup' was
not declared.  Should it be static?

cleanup here.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:04 -08:00
KAMEZAWA Hiroyuki
653d22c0f5 page_cgroup should ignore empty nodes
Fix a total bootup freeze on ia64.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-10 08:01:53 -08:00
KAMEZAWA Hiroyuki
dc19f9db38 memcg: memory hotplug fix for notifier callback
Fixes for memcg/memory hotplug.

While memory hotplug allocate/free memmap, page_cgroup doesn't free
page_cgroup at OFFLINE when page_cgroup is allocated via bootomem.
(Because freeing bootmem requires special care.)

Then, if page_cgroup is allocated by bootmem and memmap is freed/allocated
by memory hotplug, page_cgroup->page == page is no longer true.

But current MEM_ONLINE handler doesn't check it and update
page_cgroup->page if it's not necessary to allocate page_cgroup.  (This
was not found because memmap is not freed if SPARSEMEM_VMEMMAP is y.)

And I noticed that MEM_ONLINE can be called against "part of section".
So, freeing page_cgroup at CANCEL_ONLINE will cause trouble.  (freeing
used page_cgroup) Don't rollback at CANCEL.

One more, current memory hotplug notifier is stopped by slub because it
sets NOTIFY_STOP_MASK to return vaule.  So, page_cgroup's callback never
be called.  (low priority than slub now.)

I think this slub's behavior is not intentional(BUG). and fixes it.

Another way to be considered about page_cgroup allocation:
  - free page_cgroup at OFFLINE even if it's from bootmem
    and remove specieal handler. But it requires more changes.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=12041

Signed-off-by: KAMEZAWA Hiruyoki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Tested-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-01 19:55:24 -08:00
Al Viro
31168481c3 meminit section warnings
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-30 10:03:35 -08:00
KAMEZAWA Hiroyuki
33c5d3d645 memcg: bugfix for memory hotplug
The start pfn calculation in page_cgroup's memory hotplug notifier chain
is wrong.

Tested-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-12 17:17:17 -08:00
KAMEZAWA Hiroyuki
94b6da5ab8 memcg: fix page_cgroup allocation
page_cgroup_init() is called from mem_cgroup_init(). But at this
point, we cannot call alloc_bootmem().
(and this caused panic at boot.)

This patch moves page_cgroup_init() to init/main.c.

Time table is following:
==
  parse_args(). # we can trust mem_cgroup_subsys.disabled bit after this.
  ....
  cgroup_init_early()  # "early" init of cgroup.
  ....
  setup_arch()         # memmap is allocated.
  ...
  page_cgroup_init();
  mem_init();   # we cannot call alloc_bootmem after this.
  ....
  cgroup_init() # mem_cgroup is initialized.
==

Before page_cgroup_init(), mem_map must be initialized. So,
I added page_cgroup_init() to init/main.c directly.

(*) maybe this is not very clean but
    - cgroup_init_early() is too early
    - in cgroup_init(), we have to use vmalloc instead of alloc_bootmem().
    use of vmalloc area in x86-32 is important and we should avoid very large
    vmalloc() in x86-32. So, we want to use alloc_bootmem() and added page_cgroup_init()
    directly to init/main.c

[akpm@linux-foundation.org: remove unneeded/bad mem_cgroup_subsys declaration]
[akpm@linux-foundation.org: fix build]
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23 08:55:02 -07:00
Paul Mundt
4c8210427b mm: page_cgroup needs linux/vmalloc.h for vmalloc_node()/vfree().
mm/page_cgroup.c: In function 'init_section_page_cgroup':
mm/page_cgroup.c:111: error: implicit declaration of function 'vmalloc_node'
mm/page_cgroup.c:111: warning: assignment makes pointer from integer without a cast
mm/page_cgroup.c: In function '__free_page_cgroup':
mm/page_cgroup.c:140: error: implicit declaration of function 'vfree'

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23 08:55:01 -07:00
KAMEZAWA Hiroyuki
52d4b9ac0b memcg: allocate all page_cgroup at boot
Allocate all page_cgroup at boot and remove page_cgroup poitner from
struct page.  This patch adds an interface as

 struct page_cgroup *lookup_page_cgroup(struct page*)

All FLATMEM/DISCONTIGMEM/SPARSEMEM  and MEMORY_HOTPLUG is supported.

Remove page_cgroup pointer reduces the amount of memory by
 - 4 bytes per PAGE_SIZE.
 - 8 bytes per PAGE_SIZE
if memory controller is disabled. (even if configured.)

On usual 8GB x86-32 server, this saves 8MB of NORMAL_ZONE memory.
On my x86-64 server with 48GB of memory, this saves 96MB of memory.
I think this reduction makes sense.

By pre-allocation, kmalloc/kfree in charge/uncharge are removed.
This means
  - we're not necessary to be afraid of kmalloc faiulre.
    (this can happen because of gfp_mask type.)
  - we can avoid calling kmalloc/kfree.
  - we can avoid allocating tons of small objects which can be fragmented.
  - we can know what amount of memory will be used for this extra-lru handling.

I added printk message as

	"allocated %ld bytes of page_cgroup"
        "please try cgroup_disable=memory option if you don't want"

maybe enough informative for users.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:39 -07:00