Commit Graph

476 Commits

Author SHA1 Message Date
Kuninori Morimoto
9503e891d2 sh: mach-ecovec24: setup.c detailed correction
o remove unused define
o add device name comment

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-24 14:59:51 +09:00
Linus Torvalds
9b2831704e Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (33 commits)
  sh: Fix test of unsigned in se7722_irq_demux()
  sh: mach-ecovec24: Add FSI sound support
  sh: mach-ecovec24: Add mt9t112 camera support
  sh: mach-ecovec24: Add tw9910 support
  sh: MSIOF/mmc_spi platform data for the Ecovec24 board
  sh: ms7724se: Add ak4642 support
  sh: Fix up FPU build for SH5
  sh: Remove old early serial console code V2
  sh: sh5 scif pdata (sh5-101/sh5-103)
  sh: sh4a scif pdata (sh7757/sh7763/sh7770/sh7780/sh7785/sh7786/x3)
  sh: sh4a scif pdata (sh7343/sh7366/sh7722/sh7723/sh7724)
  sh: sh4 scif pdata (sh7750/sh7760/sh4-202)
  sh: sh3 scif pdata (sh7705/sh770x/sh7710/sh7720)
  sh: sh2a scif pdata (sh7201/sh7203/sh7206/mxg)
  sh: sh2 scif pdata (sh7616)
  sh-sci: Extend sh-sci driver with early console V2
  sh: Stub in P3 ioremap support for nommu parts.
  sh: wire up vmallocinfo support in ioremap() implementations.
  sh: Make the unaligned trap handler always obey notification levels.
  sh: Couple kernel and user write page perm bits for CONFIG_X2TLB
  ...
2009-12-16 10:29:52 -08:00
Guennadi Liakhovetski
a6b5f2008a V4L/DVB (13661): rj54n1cb0c: Add cropping, auto white balance, restrict sizes, add platform data
It has been experimentally found out, that the sensor only supports up to
512x384 video output and also has some restrictions on minimum scale. We
disable non-working size ranges until, maybe, someone finds out how to properly
set them up. Also add cropping support, an auto white balance control, platform
data to specify master clock frequency and polarity of the IOCTL pin.

 create mode 100644 include/media/rj54n1cb0c.h

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:30 -02:00
Guennadi Liakhovetski
760697beca V4L/DVB (13659): soc-camera: convert to the new mediabus API
Convert soc-camera core and all soc-camera drivers to the new mediabus
API. This also takes soc-camera client drivers one step closer to also be
usable with generic v4l2-subdev host drivers.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:29 -02:00
Guennadi Liakhovetski
0f4482940a V4L/DVB (13650): soc-camera: switch drivers and platforms to use .priv in struct soc_camera_link
After this change drivers can be further extended to not fail, if they don't
get platform data, but to use defaults.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16 09:27:19 -02:00
Roel Kluin
204fc390d8 sh: Fix test of unsigned in se7722_irq_demux()
se7722_fpga_irq[] is unsigned so the test does not work.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-16 13:26:53 +09:00
Kuninori Morimoto
1980fdc4df sh: mach-ecovec24: Add FSI sound support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15 22:03:08 +09:00
Kuninori Morimoto
9aa25d6449 sh: mach-ecovec24: Add mt9t112 camera support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15 22:03:07 +09:00
Kuninori Morimoto
207efd07e8 sh: mach-ecovec24: Add tw9910 support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15 22:02:46 +09:00
Magnus Damm
1ce4da7a50 sh: MSIOF/mmc_spi platform data for the Ecovec24 board
This patch adds MSIOF and mmc_spi platform data for
the CN11 port on the SuperH Ecovec24 board. No card
detect interrupt is available so the MMC code is
configured to poll. The WP signal is implemented
together with CD and power control. The board only
supports 3.3V power.

The platform data is wrapped in SDHI #ifdefs to
allow both the SDHI and the MSIOF to coexist. Only
one configuration is allowed at a time. The pin
routing is selected by a dip switch but we can
unfortunately not detect this setting at run time.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15 12:10:44 +09:00
Kuninori Morimoto
9f815a1765 sh: ms7724se: Add ak4642 support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-15 12:07:37 +09:00
Paul Mundt
b5c00a3a41 Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh/for-2.6.33 2009-12-10 15:40:31 +09:00
Linus Torvalds
3a43aaa317 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (137 commits)
  sh: include empty zero page in romImage
  sh: Make associative cache writes fatal on all SH-4A parts.
  sh: Drop associative writes for SH-4 cache flushes.
  sh: Partial revert of copy/clear_user_highpage() optimizations.
  sh: Add default uImage rule for se7724, ap325rxa, and migor.
  sh: allow runtime pm without suspend/resume callbacks
  sh: mach-ecovec24: Remove un-defined settings for VPU
  sh: mach-ecovec24: LCDC drive ability become high
  sh: fix sh7724 VEU3F resource size
  serial: sh-sci: Fix too early port disabling.
  sh: pfc: pr_info() -> pr_debug() cleanups.
  sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines.
  sh: Improve kfr2r09 serial port setup code
  sh: Break out SuperH PFC code
  sh: Move KEYSC header file
  sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file
  sh: Add CPG save/restore code for sh7724 R-standby
  sh: Add SDHI power control support to Ecovec
  mfd: Add power control platform data to SDHI driver
  sh: mach-ecovec24: modify address map
  ...
2009-12-09 19:03:16 -08:00
Kuninori Morimoto
fb2e9daffe sh: mach-ap325rxa: Add SOCAM_DATA_ACTIVE_HIGH flags for soc-camera
Current soc-camera needs SOCAM_DATA_ACTIVE_xxx flags for use.
We can not open old ncm03j camera device without this patch.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-09 12:40:47 +09:00
Magnus Damm
657bf0bd06 sh: LCDC start_transfer() for the KFR2R09 board
This patch adds a ->start_transfer() callback to the
KFR2R09 lcd handling code. The callback is used to
notify the lcd controller that a new frame of data
is about to be transferred. The callback is only used
in combination with deferred io, but the code has
been tested both with and without deferred io enabled.

Without this patch the display data on the KFR2R09
lcd panel becomes corrupted over time.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-09 12:40:45 +09:00
Takashi Iwai
baf9226667 Merge branch 'topic/asoc' into for-linus 2009-12-04 16:22:41 +01:00
Kuninori Morimoto
82b3322178 sh: mach-ecovec24: LCDC drive ability become high
Drive ability for LCDC become high for safety,
became there is strange individual specificity board in mass production

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-12-04 13:42:32 +09:00
Takashi Iwai
75639e7ee1 Merge branch 'topic/beep-rename' into topic/core-change 2009-12-01 15:58:10 +01:00
Kuninori Morimoto
d53bd80cb3 sh: ms7724se: Add runtime PM support for FSI
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-30 12:56:44 +00:00
Magnus Damm
e6d8460aca sh: Improve kfr2r09 serial port setup code
This patch improves the serial port communication quality
of port YC401 on the KFR2R09 board. With this fix serial
console is fine at 115200 - up and down keys now work as
expected. Thanks to Hirohide Yamasaki for this fix.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30 12:02:55 +09:00
Magnus Damm
fc1d003de3 sh: Move KEYSC header file
This patch moves the KEYSC header file from the
SuperH specific asm directory to a place where
it can be shared by multiple architectures.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30 12:02:51 +09:00
Magnus Damm
98779ad822 sh: Add SDHI power control support to Ecovec
This patch adds support for SDHI power control to the
Ecovec board. Platform data and power control callbacks
for SDHI0 and SDHI1 are added. Power is by default off.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30 12:02:48 +09:00
Rafael Ignacio Zurita
9dcaa7b25f ALSA: sh: add SuperH DAC audio driver for ALSA V4
This is a port of the sound/oss/sh_dac_audio.c driver.
The driver uses an on-chip 8-bit D/A converter, which has a speaker connected
to one of its channels, found in several ancient HP machines.
For interrupts it uses a high-resolution timer (hrtimer).
Tested on SH7709 based hp6xx (HP Jornada 680/690 and HP Palmtop 620lx/660lx).

Also, since OSS Emulation works, the old OSS sound/oss/sh_dac_audio.c driver
would be obsolete soon, and it could be removed.

Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-04 09:17:40 +01:00
Roel Kluin
9016332014 sh: Make sure indexes are positive
The indexes are signed, make sure they are not negative
when we read array elements.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-04 11:48:07 +09:00
Paul Mundt
a37c6c7aec sh: mach-se: Convert SE7722 FPGA to dynamic IRQ allocation.
This gets rid of the arbitrary set of vectors used by the SE7722 FPGA
interrupt controller and witches over to a completely dynamic set.
No assumptions regarding a contiguous range are made, and the platform
resources themselves need to be filled in lazily.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-04 11:44:21 +09:00
Magnus Damm
3d0de41442 sh: Remove unused WP signal for SDHI0 and KFR2R09
Get rid of the unused WP signal for SDHI0 on KFR2R09.
This because yc304 on KFR2R09 is a Micro SD slot which
does not implement the WP signal.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-02 14:19:29 +09:00
Magnus Damm
8b431a7e66 sh: Add SDHI1 support to the AP325RXA board
Update the SDHI platform data for the AP325RXA board
to include support for the CN7 Micro SD Card slot.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-02 14:19:28 +09:00
Magnus Damm
58ee987e2f sh: Add KFR2R09 specific memory pre/post R-standby code
Add R-standby support to the KFR2R09 sdram code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:38:49 +09:00
Magnus Damm
eb0cd9e88c sh: Add Ecovec24 specific memory pre/post sleep code
Add self-refresh handling code for the Ecovec24 board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:33:46 +09:00
Magnus Damm
86c7d03a0f sh: Add ap325rxa specific memory pre/post sleep code
Add self-refresh handling code for the AP325RXA board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:33:44 +09:00
Magnus Damm
53528928d1 sh: Move ap325rxa board code into separate directory
Move the AP325RXA board code from a single board file
to a separate directory. This to make it easy to add
support for sdram sleep mode code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 14:33:43 +09:00
Magnus Damm
13fa551b5e sh: Add migor specific memory pre/post sleep code
Add self-refresh handling code for the Migo-R board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:59:27 +09:00
Magnus Damm
3b9f2952a3 sh: Add ms7724se specific memory pre/post sleep code
Add self-refresh handling code for the MS7724SE board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:59:26 +09:00
Magnus Damm
67e522d0f9 sh: Add kfr2r09 specific memory pre/post sleep code
Add self-refresh handling code for the KFR2R09 board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-30 11:59:26 +09:00
Kuninori Morimoto
3714a9a026 sh: mach-ecovec24: Add USB1 gadget support
USB1 can change to host/function by checking PTB3.
This patch add USB1 gadget support and check PTB3 when boot,
and change name to usb1_common_XXX from usb1_host_XXX.

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28 16:07:19 +09:00
Magnus Damm
5b380ec11d sh: add SDHI1 support to ms7724se
Add support for cn8 and SDHI1 to the ms7724se board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28 09:18:24 +09:00
Magnus Damm
8013cc9a5d sh: mac address through private data for sh_eth on ms7724se
Convert the ms7724se board code to pass the mac
address to the sh_eth driver using platform data.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-28 09:18:24 +09:00
Magnus Damm
376abbb4b3 sh: mac address through private data for sh_eth on ecovec24
Convert the ecovec24 board code to pass the mac
address to the sh_eth driver using platform data.
Also, remove the static clock to allow Runtime PM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 19:50:47 +09:00
Magnus Damm
40e4231809 sh: add hwblk_id to sh_eth on ecovec24
Add HWBLK_ETHER to the sh_eth platform device
to allow Runtime PM of the ethernet hardware.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 19:47:36 +09:00
Paul Mundt
a384fe55c2 Merge branch 'sh/stable-updates' 2009-10-26 19:46:59 +09:00
Magnus Damm
88345411df sh: rsk7203 CONFIG_MTD=n fix
Fix the rsk7203 board code to build with CONFIG_MTD=n.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 19:46:24 +09:00
Paul Mundt
15893fb565 Merge branch 'sh/sdhi-mfd'
Conflicts:
	arch/sh/boards/mach-ecovec24/setup.c
	arch/sh/boards/mach-kfr2r09/setup.c
2009-10-26 10:47:44 +09:00
Kuninori Morimoto
96987d96f0 sh: mach-ecevec24: Add SDHI support
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:27 +09:00
Magnus Damm
d2a2fb97d1 sh: SDHI platform data to the kfr2r09 board
Add SD Card support to the kfr2r09 board using the
sh_mobile_sdhi driver hooked up to SDHI0 and yc304.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:06 +09:00
Magnus Damm
0f79af6009 sh: SDHI platform data to the SE7724 board
Add SD Card support to the se7724 board using the
sh_mobile_sdhi driver hooked up to SDHI0 and CN7.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:05 +09:00
Magnus Damm
17f81473d1 sh: SDHI platform data to the AP325RXA board
Convert the AP325 board to use sh_mobile_sdhi for the
SD Card connected to CN3 instead of mmc_spi.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:05 +09:00
Magnus Damm
2e3fc56c8d sh: SDHI platform data to the Migo-R board
Convert the Migo-R board to use sh_mobile_sdhi for the
SD Card connected to CN9 instead of mmc_spi.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-26 10:37:05 +09:00
Paul Mundt
abeaf33a41 Merge branch 'sh/stable-updates'
Conflicts:
	arch/sh/mm/cache-sh4.c
2009-10-16 15:14:50 +09:00
Thomas Gleixner
52a94909f0 sh: Remove BKL from landisk gio.
The open function got the BKL via the big push down. Replace it by
preempt_enable/disable as this is sufficient for an UP machine.

The ioctl can be unlocked because there is no functionality which
requires serialization. The usage by multiple callers is broken with
and without the BKL due to the local static variable addr.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-16 14:42:33 +09:00
Guennadi Liakhovetski
a469f627c1 SH: add support for the RJ54N1CB0C camera for the kfr2r09 platform
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:21:59 +09:00