Commit Graph

20618 Commits

Author SHA1 Message Date
Thomas Hellstrom
689692e73e via: add some new chipsets
Disable 3D functionality and AGP DMA for chipsets with the DX9 3D engine.

Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-02-08 13:24:25 +11:00
Thomas Hellstrom
76f625511e via: some PCI posting flushes
Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-02-08 13:24:25 +11:00
Greg Kroah-Hartman
14719f325e Revert "PCI: remove duplicate device id from ata_piix"
This reverts commit b11056355e.

It was incorrect, the proper fix is coming through the SATA tree, sorry
about that.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 16:17:27 -08:00
Andrew Victor
0cc8674f2b AT91: MACB support
The Atmel MACB Ethernet peripheral is also integrated in the AT91SAM9260
and AT91SAM9263 processors.  The differences from the AVR32 version are:
      * Single peripheral clock.
      * MII/RMII selection bit is inverted.
      * Clock enable bit.

Original patch from Patrice Vilchez.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:50:53 -05:00
Stephen Hemminger
683349a3fa sky2: version 1.12
Updated version for WOL and new id's

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:50:50 -05:00
Stephen Hemminger
f1a0b6f56e sky2: add new chip ids
More new chip id's from vendor driver version 10.0.4.3

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:50:48 -05:00
Stephen Hemminger
9374549428 sky2: Yukon Extreme support
This is basic support for the new Yukon Extreme
chip, extracted from the new vendor driver 10.0.4.3.

Since this is untested hardware, it has a big fat warning for now.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:50:46 -05:00
Stephen Hemminger
62335ab013 sky2: safer transmit timeout
Rather than trying to be "smart" about possible transmit timeout
causes. Just clear all pending frames and reset the PHY.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:50:44 -05:00
Stephen Hemminger
4a50a876ac sky2: TSO support for EC_U
The Yukon EC_U chipset apparently supports TSO but only for non-Jumbo
frame sizes because it lacks a Ram buffer.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:50:42 -05:00
Stephen Hemminger
b02a92586d sky2: use dev_err for error reports
Use the standard dev_xxx functions instead of printk directly for
error reports. Fix a bug where the initialization would return 0
if allocation of network device failed.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:50:40 -05:00
Eric W. Biederman
f7feaca77d msi: Make MSI useable more architectures
The arch hooks arch_setup_msi_irq and arch_teardown_msi_irq are now
responsible for allocating and freeing the linux irq in addition to
setting up the the linux irq to work with the interrupt.

arch_setup_msi_irq now takes a pci_device and a msi_desc and returns
an irq.

With this change in place this code should be useable by all platforms
except those that won't let the OS touch the hardware like ppc RTAS.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:08 -08:00
Eric W. Biederman
5b912c108c msi: Kill the msi_desc array.
We need to be able to get from an irq number to a struct msi_desc.
The msi_desc array in msi.c had several short comings the big one was
that it could not be used outside of msi.c.  Using irq_data in struct
irq_desc almost worked except on some architectures irq_data needs to
be used for something else.

So this patch adds a msi_desc pointer to irq_desc, adds the appropriate
wrappers and changes all of the msi code to use them.

The dynamic_irq_init/cleanup code was tweaked to ensure the new
field is left in a well defined state.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:08 -08:00
Eric W. Biederman
1c659d61cf msi: Remove attach_msi_entry.
The attach_msi_entry has been reduced to a single simple assignment,
so for simplicity remove the abstraction and directory perform the
assignment.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:08 -08:00
Eric W. Biederman
866a8c87c4 msi: Fix msi_remove_pci_irq_vectors.
Since msi_remove_pci_irq_vectors is designed to be called during
hotplug remove it is actively wrong to query the hardware and expect
meaningful results back.

To that end remove the pci_find_capability calls.  Testing
dev->msi_enabled and dev->msix_enabled gives us all of the information
we need.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:07 -08:00
Eric W. Biederman
d40f540ce6 msi: Remove msi_lock.
With the removal of msi_lookup_irq all of the functions using msi_lock
operated on a single device and none of them could reasonably be
called on that device at the same time. 

Since what little synchronization that needs to happen needs to happen
outside of the msi functions, msi_lock could never be contended and as
such is useless and just complicates the code.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:07 -08:00
Eric W. Biederman
ded86d8d37 msi: Kill msi_lookup_irq
The function msi_lookup_irq was horrible.  As a side effect of running
it changed dev->irq, and then the callers would need to change it
back.  In addition it does a global scan through all of the irqs,
which seems to be the sole justification of the msi_lock.

To remove the neede for msi_lookup_irq I added first_msi_irq to struct
pci_dev.  Then depending on the context I replaced msi_lookup_irq with
dev->first_msi_irq, dev->msi_enabled, or dev->msix_enabled.

msi_enabled and msix_enabled were already present in pci_dev for other
reasons.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:07 -08:00
Michael Ellerman
8fed4b6523 MSI: Combine pci_(save|restore)_msi/msix_state
The PCI save/restore code doesn't need to care about MSI vs MSI-X, all
it really wants is to say "save/restore all MSI(-X) info for this device".

This is borne out in the code, we call the MSI and MSI-X save routines
side by side, and similarly with the restore routines.

So combine the MSI/MSI-X routines into pci_save_msi_state() and
pci_restore_msi_state(). It is up to those routines to decide what state
needs to be saved.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:07 -08:00
Michael Ellerman
0fcfdabbdb MSI: Remove pci_scan_msi_device()
pci_scan_msi_device() doesn't do anything anymore, so remove it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:07 -08:00
Michael Ellerman
88187dfa4d MSI: Replace pci_msi_quirk with calls to pci_no_msi()
I don't see any reason why we need pci_msi_quirk, quirk code can just
call pci_no_msi() instead.

Remove the check of pci_msi_quirk in msi_init(). This is safe as all
calls to msi_init() are protected by calls to pci_msi_supported(),
which checks pci_msi_enable, which is disabled by pci_no_msi().

The pci_disable_msi routines didn't check pci_msi_quirk, only
pci_msi_enable, but as far as I can see that was a bug not a feature.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:06 -08:00
Greg Kroah-Hartman
89298c7a41 PCI: remove duplicate device id from ipr
As pointed out by Kay Sievers <kay.sievers@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:06 -08:00
Greg Kroah-Hartman
b11056355e PCI: remove duplicate device id from ata_piix
As pointed out by Kay Sievers <kay.sievers@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:06 -08:00
Pavel Machek
e36c455c2f PCI: power management: remove noise on non-manageable hw
Return early from pci_set_power_state() if hardware does not support
power management. This way, we do not generate noise in the logs.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:06 -08:00
Satoru Takeuchi
c54c187907 PCI: cleanup MSI code
Cleanup MSI code as follows:

 - fix some types
 - fix strange local variable definition
 - delete unnecessary blank line
 - add comment to #endif which is far from corresponding #ifdef

Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:06 -08:00
Adrian Bunk
8255cf35d5 PCI: make isa_bridge Alpha-only
Since isa_bridge is neither assigned any value !NULL nor used on !Alpha, 
there's no reason for providing it.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:06 -08:00
Adrian Bunk
1863100a02 PCI: remove quirk_sis_96x_compatible()
Since 2.6.0-test10, all quirk_sis_96x_compatible() had any effect on
was a printk().

This patch therefore removes it.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:06 -08:00
Jean Delvare
2f2d39d284 PCI: Speed up the Intel SMBus unhiding quirk
Speed up the Intel SMBus PCI quirk by avoiding tests which can only
fail. This also makes the compiled code significantly smaller when
using gcc 3.2/3.4. gcc 4.x appears to optimize the code by itself so
this change doesn't make a difference there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:06 -08:00
Daniel Yeisley
15a260d53f PCI Quirk: 1k I/O space IOBL_ADR fix on P64H2
There's an existing quirk for the kernel to use 1k IO space granularity
on the Intel P64H2.  It turns out however that pci_setup_bridge() in
drivers/pci/setup-bus.c reads in the IO base and limit address register
masks it off to the nearest 4k, and writes it back.  This causes the
kernel to be on 1k boundaries and the hardware to be 4k aligned.  The
patch below fixes the problem. 

Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:05 -08:00
Kenji Kaneshige
9f593e30b3 shpchp: delete trailing whitespace
This patch deletes trailing white space in SHPCHP driver. This has no
functional change.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:05 -08:00
Kenji Kaneshige
1555b33da0 shpchp: remove DBG_XXX_ROUTINE
This patch removes DBG_ENTER_ROUTINE, DBG_LEAVE_ROUTINE and related
code.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:05 -08:00
Kenji Kaneshige
3d9c18872f shpchp: remove CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE
The CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE config option is not
needed because polling mechanism for shpc hotplug events can be
enabled through module option 'shpchp_poll_mode'. This patch removes
CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:05 -08:00
Kristen Carlson Accardi
34d03419f0 PCIEHP: Add Electro Mechanical Interlock (EMI) support to the PCIE hotplug driver.
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:05 -08:00
Kenji Kaneshige
262303fe32 pciehp: fix wait command completion
This patch fixes this problem that pciehp driver will sleep
unnecessarily long when waiting for command completion. With this
patch, modprobe pciehp driver becomes very faster as follows for
instance.

  o Without this patch
    # time /sbin/modprobe pciehp

    real    0m4.976s
    user    0m0.000s
    sys     0m0.004s

  o With this patch
    # time /sbin/modprobe pciehp

    real    0m0.640s
    user    0m0.000s
    sys     0m0.004s

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:05 -08:00
Kenji Kaneshige
44ef4cefb0 pciehp: cleanup wait command completion
This patch cleans up the code to wait for command completion.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:05 -08:00
Kenji Kaneshige
75e13178af pciehp: remove unused pcie_cap_base
This patch removes unused pcie_cap_base variable.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:05 -08:00
Kenji Kaneshige
15232ece55 pciehp: cleanup pciehp.h
This patch cleans up pciehp.h. This has no functional change.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:05 -08:00
Kenji Kaneshige
a0f018daa9 pciehp: cleanup register access
This patch cleans up register access functions. This has no functional
change.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:04 -08:00
Kenji Kaneshige
a8c2b63597 pciehp: remove unused pci_bus from struct controller
This patch removes unused pci_bus member from struct controller.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:04 -08:00
Kenji Kaneshige
48fe391517 pciehp: remove unnecessary php_ctlr
The struct php_ctlr seems to be only for complicating codes. This
patch removes struct php_ctlr and related codes.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:04 -08:00
Kenji Kaneshige
2410fa4eae pciehp: cleanup slot list
This patch cleans up slot list handling (use list_head). This has no
functional change.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:04 -08:00
Kenji Kaneshige
a0b1725720 pciehp: cleanup init_slot()
This patch cleans up init_slots() in pciehp_core.c based on
pcihp_skeleton.c. This has no functional change.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:04 -08:00
Adrian Bunk
fd9b37cc4e PCI: remove pci_find_device_reverse()
This patch removes the no longer used pci_find_device_reverse().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:04 -08:00
Adrian Bunk
c30ca1db39 PCI: quirks.c: cleanup
This patch contains the following cleanups:
- move all EXPORT_SYMBOL's directly below the code they are exporting
- move all DECLARE_PCI_FIXUP_*'s directly below the functions they
  are calling

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:04 -08:00
Linas Vepstas
81b1955eef PCI: Use newly defined PCI channel offline routine
Use newly minted routine to access the PCI channel state.

Signed-off-by: Linas Vepstas <linas@linas.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:04 -08:00
Hidetoshi Seto
c87deff776 PCI : Add selected_regions funcs
This patch adds the following changes into generic PCI code especially
for PCI legacy I/O port free drivers.

     - Added new pci_request_selected_regions() and
       pci_release_selected_regions() for PCI legacy I/O port free
       drivers in order to request/release only the selected regions.

     - Added helper routine pci_select_bars() which makes proper mask
       of BARs from the specified resource type. This would be very
       helpful for users of pci_enable_device_bars().

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:03 -08:00
Hidetoshi Seto
38cc13022e PCI : add extremely specialized __pci_reenable_device for default resume
Original patch was posted as "PCI : Move pci_fixup_device and is_enabled".
This 3 of 3 patches does:

  - add __pci_reenable_device
    (recover former change of 1st patch)

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:03 -08:00
Hidetoshi Seto
9fb625c3cc PCI : Move pci_fixup_device and is_enabled (originally intended change)
Original patch was posted as "PCI : Move pci_fixup_device and is_enabled".
This 2 of 3 patches does:

  - Move pci_fixup_device and enable_cnt
    (originally intended change)

  - relocate pci_fixup_device
    (recover latter change of 1st patch)

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:03 -08:00
Hidetoshi Seto
924b08f3ff PCI : remove too specialized __pci_enable_device for default resume
Original patch was posted as "PCI : Move pci_fixup_device and is_enabled".
This 1 of 3 patches does:

  - reverts small part of Inaky's patch
    (remove __pci_enable_device)
    This change will be recovered by 3rd patch.

  - temporarily remove pci_fixup_device.
    This change will be recovered by 2nd patch.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:03 -08:00
Yinghai Lu
07eddf3d59 PCI: check szhi when sz is 0 when 64 bit iomem bigger than 4G
For pci mem resource that size is bigger than 4G, the sz returned by
pc_size will be 0.
So that resource is skipped, and register contained hi address will be
treated as another 32bit resource. We need to use sz64 and pci_sz64 for
64 bit resource for clear logical.  Typical usages for this: Opteron
system with co-processor and the co-processor could take more than 4G
RAM as pre-fetchable mem resource.


Signed-off-by: Yinghai Lu <yinghai.lu@amd.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:03 -08:00
Stephen Hemminger
e3173832d7 sky2: add Wake On Lan support
Adds basic magic packet wake on lan support to the sky2 driver.
Note: initial WOL value is based on BIOS settings.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:49:59 -05:00
Hennerich, Michael
dde6d43d06 fix unaligned exception in /drivers/net/wireless/orinoco.c
Prevent an unaligned exception to occur.  (GCC 4.1) tmp is defined as char
pointer while it is later accessed as short.

Cc: Jean Tourrilhes <jt@hpl.hp.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:49:57 -05:00
Robert P. J. Day
f100ae2ed0 Remove unused kernel config option DLCI_COUNT
Remove the unused kernel config option DLCI_COUNT.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Krzysztof Halasa {khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:49:55 -05:00
Alan Cox
45d3ac4ec3 z85230: spinlock logic
At some point someone added a spin_lock(&dev->lock) to the IRQ handler for
the Z85230 driver.  This actually correctly fixes a bug but the necessary
changes to remove the chan->lock calls in the event handlers were not made
(c->lock is the same lock).

Simona Dascenzo reported the problem with the driver and this patch should
fix the problem he found.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:49:52 -05:00
Maciej W. Rozycki
257b346d20 mips: declance: Driver model for the PMAD-A
This is a set of changes that converts the PMAD-A support to the driver model.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:49:11 -05:00
Linas Vepstas
d9a9720eab Spidernet: Rework RX linked list
Make the hardware perceive the RX descriptor ring as a null-terminated linked
list, instead of a circular ring.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: James K Lewis <jklewis@us.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 18:48:56 -05:00
Greg Kroah-Hartman
64358164f5 USB: remove duplicate device id from zc0301
As pointed out by Kay Sievers <kay.sievers@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:40 -08:00
Greg Kroah-Hartman
ab6c41a498 USB: remove duplicate device id from usb_storage
As pointed out by Kay Sievers <kay.sievers@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:40 -08:00
Greg Kroah-Hartman
33c6b7e99f USB: remove duplicate device id from keyspan
As pointed out by Kay Sievers <kay.sievers@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:40 -08:00
Greg Kroah-Hartman
210b197579 USB: remove duplicate device id from ftdi_sio
As pointed out by Kay Sievers <kay.sievers@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:40 -08:00
Greg Kroah-Hartman
9da88d78bc USB: remove duplicate device id from visor
As pointed out by Kay Sievers <kay.sievers@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:40 -08:00
Oliver Neukum
1a68f71d4f USB: a bit more coding style cleanup
I was sitting in a train threatened to be blocked by ice. I took this
as a hint to do some more boring work for the common good. Here's
a bit more for coding style.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:40 -08:00
Oliver Neukum
9251644ab3 usbcore: trivial whitespace fixes
This patch (as844) makes some trivial whitespace fixes to a few files
in usbcore.  Oliver did most of the work and Alan added some tidying up.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:40 -08:00
Alan Stern
1096f780d0 usb-storage: use first bulk endpoints, not last
According to the Bulk-Only spec, usb-storage is supposed to use the
_first_ bulk-in and bulk-out endpoints it finds, not the _last_.  And
while we're at it, we ought to test the direction of the interrupt
endpoint as well.  This patch (as842) makes both changes.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:40 -08:00
Alan Stern
629e4427aa EHCI: fix interrupt-driven remote wakeup
Now that port status change notifications are interrupt-driven,
ehci-hcd needs to tell usbcore when a remote-wakeup resume operation
is finished -- we can no longer rely on the core to poll and find
out.  This patch (as843) uses the root-hub status timer to force a
poll after the resume is complete.

The patch also changes the test for detecting when the TDRSMDN resume
period has expired.  It's necessary to use time_after_eq() instead of
time_after(), since the polling is triggered precisely by a timer.
The same change is made for TDRSTR reset expiration, for consistency.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:39 -08:00
Marcelo Tosatti
1d619f128b USB: switch ehci-hcd to new polling scheme
Switch ehci-hcd to use the new polling scheme, which reports root
hub status changes via the interrupt handler, in an asynchronous
fashion. Doing so disables polling for status changes (whose handler is
rh_timer_func).

Tested on a Geode GX machine, which is now capable of running at =~ 5
timer interrupts per second (in the -rt tree), resulting in significant
power savings.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:39 -08:00
Oliver Neukum
d053218408 USB: autosuspend for usb printer driver
this implements autosuspend for usb printers. It compiles and is tested.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:39 -08:00
Jeremy Roberson
a19ceb56cb USB Input: Added kernel module to support all GTCO CalComp USB InterWrite School products
Added a kernel module (gtco) to the USB Input subsystem.  This kernel
module adds support for all GTCO CalComp USB InterWrite School products.

Signed-off-by: Jeremy A. Roberson <jroberson@gtcocalcomp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:39 -08:00
Kevin Lloyd
e43062dd20 USB: Sierra Wireless auto set D0
This patch ensures that the device is turned on when inserted into the system.
It also adds more VID/PIDs and matches the N_OUT_URB with the airprime driver.

Signed-off-by: Kevin Lloyd <linux@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:39 -08:00
Hvard Skinnemoen
ef3ff462a3 USB: usb ethernet gadget recognizes HUSB2DEV
Define DEV_CONFIG_CDC when compiling for HUSB2DEV.

From: Hvard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:39 -08:00
Hvard Skinnemoen
1f5b9cc9e4 USB: list atmel husb2_udc gadget controller
This identifies the driver for the Atmel HUSB2 Device Controller,
as integrated into the first AVR32 chip, the AT32AP700.

From: Hvard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:39 -08:00
Alan Stern
49631ca7f3 USB: gadgetfs AIO tweaks
This patch (as837) fixes several mistakes in the AIO interface of the
gadgetfs driver:

	The ki_retry method is not supposed to do a put on the kiocb.
	The extra call to aio_put_req() causes memory corruption.
	(Note: This call was removed before, by patch as691, and then
	mysteriously re-introduced later.)

	Even if a read transfer is cancelled, we can and should send
	to the user all the data that did manage to get transferred.

	Testing for AIO cancellation in the I/O completion handler
	is both racy and (now) unnecessary.  aio_complete() does its
	own checking, in a safe manner.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:39 -08:00
David Brownell
ce46794f77 USB: gadgetfs behaves better on userspace init bug
Resolve an initizlization issue that could come up if the userspace
driver wrote invalid descriptors to a dual-speed device.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:39 -08:00
David Brownell
5b89db02a5 USB: gadgetfs race fix
This resolves a race in gadgetfs associated with changing device/ep0
when processing control requests.  The fix is to change that state
earlier, when the control response is issued, so there's no window
in which userspace could see the wrong state; and enlarge the scope
of the spinlock during the ep0 request completion handler.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:38 -08:00
David Brownell
0864c7a928 USB: gadgetfs simplifications
This simplifies event reading by eliminating arithmetic and being
more direct/obvious, and tweaks some debug messages slightly.
The math elimination will change timings, sometimes enough to
allow a race to appear.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:38 -08:00
David Brownell
7489d14943 USB: gadgetfs cleanups
Minor gadgetfs cleanups:

 - EP0 state constants become consistently STATE_DEV_* rather than
   sometimes omitting the "DEV_"; STATE_EP_* were already consistent.

 - Comment that ep0 state is protected by the spinlock, and update
   code that was neglecting that rule.

None of this is expected to change behavior.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:38 -08:00
Oliver Neukum
3ff4fd94c8 USB: race fixes for usb-serial, step 3
- fix an error code returned if a device has been disconnected

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:38 -08:00
Oliver Neukum
4b10f0f3a0 USB: race fixes for usb-serial, step 2
- take BKL before looking up a driver to associate with a device to make
  sure the module is not unloaded after looking up but before association
  & bumping module count

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:38 -08:00
Oliver Neukum
34ef50e5b1 USB: race fixes for usb-serial step 1
- introduce a spinlock for serial_table to eliminate the window between
  looking up a device and getting a reference
- delay inscription of a new device into serial_table until it is fully
  initialised
- make sure disconnect() kills all URBs to avoid leckage across a soft unbind


Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:38 -08:00
Rainer Weikusat
fdcba53e2d fix for bugzilla #7544 (keyspan USB-to-serial converter)
At least the Keyspan USA-19HS USB-to-serial converter supports
two different configurations, one where the input endpoints
have interrupt transfer type and one where they are bulk endpoints.
The default UHCI configuration uses the interrupt input endpoints.
The keyspan driver, OTOH, assumes that the device has only bulk
endpoints (all URBs are initialized by calling usb_fill_bulk_urb
in keyspan.c/ keyspan_setup_urb). This causes the interval field
of the input URBs to have a value of zero instead of one, which
'accidentally' worked with Linux at least up to 2.6.17.11 but
stopped to with 2.6.18, which changed the UHCI support code handling
URBs for interrupt endpoints. The patch below modifies to driver to
initialize its input URBs either as interrupt or as bulk URBs,
depending on the transfertype contained in the associated endpoint
descriptor (only tested with the default configuration) enabling
the driver to again receive data from the serial converter.

Greg K-H reworked the patch.

Signed-off-by: Rainer Weikusat <rweikusat@sncag.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:38 -08:00
Oliver Neukum
3ede760f0e USB: total removal of multithreaded probing in usb
The whole approach is simply wrong.  Forking a thread means that
  - errors are ignored
  - locking is ignored

Doing this correctly would require major surgery for questionable benefit.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:38 -08:00
David Brownell
66e56ce75e USB: at91_udc wakeup event updates
This updates the AT91 UDC driver's handling of wakeup events:

 - Fix a bug in the original scheme, which was never updated after
   the {enable,disable}_irq_wake() semantics were updated to address
   refcounting issues (i.e. behave for shared irqs).

 - Couple handling of both type of wakeup events, to be more direct.  The
   controller can be source of wakeup events for cases like bus reset
   and USB resume.  On some boards, VBUS sensing is also IRQ driven.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:37 -08:00
Alan Stern
57e06c1137 EHCI: force high-speed devices to run at full speed
This patch (as710) adds a sysfs class-device attribute file named
"companion" for EHCI controllers.  The file contains a list of port
numbers that are dedicated to the companion controller; by writing a
port number to the file the user can force a high-speed device
attached directly to the computer to run at full speed.  (As far as I
know it is not possible to do this for a device attached to an
external hub.)  A port is removed from the file by writing the
negative of its port number.

Several users have asked for this facility and it seems like a useful
thing to have.  Every now and then one runs across a device which
behaves much better at full speed than at high speed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:37 -08:00
Alan Stern
625b5c9a00 EHCI: don't hide ports owned by the companion
This patch (as709) changes the way ehci-hcd presents port status
values for ports owned by the companion controller.  It no longer
hides the information; in particular, it allows the core to see the
disconnect event that occurs when a full- or low-speed device is
switched over to the companion.  This is required for the next patch
in this series.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:37 -08:00
Alan Stern
e6316565e5 EHCI: local variable for port status register
This patch (as708) introduces a local variable to hold the port
status-register address in ehci-hub.c.  There's not much improvement
in the object code, but it sure is a lot easier to read.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:37 -08:00
Alan Stern
896fbd7199 usbcore: remove unused bandwith-related code
This patch (as841) removes from usbcore a couple of support routines
meant to help with bandwidth allocation.  With the changes to uhci-hcd
in the previous patch, these routines are no longer used anywhere.
Also removed is the CONFIG_USB_BANDWIDTH option; it no longer does
anything and is no longer needed since the HCDs now handle bandwidth
issues correctly.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:37 -08:00
Alan Stern
3ca2a3211e UHCI: fix bandwidth allocation
This patch (as840) fixes the bandwidth allocation mechanism in
uhci-hcd.  It has never worked correctly.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:37 -08:00
Geoff Levand
6a6c957eba USB: ps3 ohci bus glue
USB OHCI driver bus glue for the PS3 game console.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:37 -08:00
Benjamin Herrenschmidt
de44743b03 USB: ohci error handling cleanup
Restructure the ohci_hcd_mod_init error handling code in to better support
the multiple platform drivers.  This does not change the functionality.


Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:37 -08:00
Geoff Levand
4a1a4d8b87 USB: ps3 controller hid quirk
Add the USB HID quirk HID_QUIRK_SONY_PS3_CONTROLLER.  This sends an
HID_REQ_GET_REPORT to the the PS3 controller to put the device into
'operational mode'.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:36 -08:00
Geoff Levand
ad75a41085 USB: ps3 ehci bus glue
USB EHCI driver bus glue for the PS3 game console.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:35 -08:00
Oliver Neukum
b3ebd52221 USB: better ethtool support for kaweth
this implements enough ethtool support to make NetworkManager happy.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:35 -08:00
Oliver Neukum
b98b98f97c USB: power management for kaweth
- implements suspend when the network interface is down
- fixes a typo in comments
- adds debugging output for power management
- fixes a compiler warning

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:35 -08:00
Phil Endecott
511779fd9e usb: gadgetfs remove delayed init mode
Gadgetfs had a mode in which endpoint descriptors were written by the user
program before connection.  This mode had some bugs, and hasn't seen much
(if any) use.  This patch removes that mode, leaving the mode of operation
where the user program waits for endpoint 0 to report a SET_CONFIGURATION,
and only then configures the endpoints.

From: "Phil Endecott" <spam_from_usb_devel@chezphil.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:35 -08:00
David Brownell
2505107def usb: gadgetfs whitespace cleanup
Remove some whitespace bugs in gadgetfs (mostly from someone's
patch updating the AIO support).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:35 -08:00
Marc Pignat
6dde896e4e USB: ohci-at91 refcount fix for irq wake enables
The attached patch fixes the unbalanced calls to enable_irq_wake() and
disable_irq_wake() in the AT91 USB Host driver.

It should resolve these kernel messages:
  Unbalanced IRQ x wake disable
  BUG: warning at kernel/irq/manage.c:167/set_irq_wake()

(The original code was debugged before a bug in the genirq wakeup irq
logic was fixed by adding the IRQ wake enable/disable refcounting.
Not all code yet uses the bugfixed model.)

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:35 -08:00
Alan Stern
f3f4906516 usb-storage: SCSI level fixes
This patch (as835) removes from usb-storage the code which sets all
devices to a SCSI level of at least SCSI-2.  The original reasons for
doing this no longer apply, and in fact it prevents certain kinds of
ATA pass-thru commands from being used.

The patch also marks CB and CBI devices that are SCSI-0 (legacy SCSI)
as being single-LUN, since the combined SCSI-over-USB transport
protocol has no way to convey LUN information to these devices.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:35 -08:00
Alan Stern
85a975d0ce UHCI: no dummy TDs for Iso QHs
Isochronous queues don't need a dummy TD because the Queue Header
isn't managed by the hardware.  This patch (as836) removes the
unnecessary dummy TDs.

The patch also fixes a long-standing typo in a comment (a "don't" was
missing -- potentially very confusing!).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:35 -08:00
Alan Stern
f3fe239b67 UHCI: improved debugging checks for the frame list
This patch (as768) improves the debugging checks for the uhci-hcd
frame list.  The number of entries displayed is limited to 10, and the
driver now checks for the correct Skeleton QH link value at the end of
each chain of Isochronous TDs.  The code to compute these link values
is now used in two spots, so it is moved into its own separate
subroutine.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:35 -08:00
Oliver Neukum
f38649fee9 USB: race on disconnect in mdc800
I overlooked one. Setting the flag and killing the URBs must be under the lock
so that no URB is submitted after usb_kill_urb()

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:34 -08:00
Pete Zaitcev
6f23ee1fef USB: add binary API to usbmon
This patch adds a new, "binary" API in addition to the old, text API usbmon
had before. The new API allows for less CPU use, and it allows to capture
all data from a packet where old API only captured 32 bytes at most. There
are some limitations and conditions to this, e.g. in case someone constructs
a URB with 1GB of data, it's not likely to be captured, because even the
huge buffers of the new reader are finite. Nonetheless, I expect this new
capability to capture all data for all real life scenarios.

The downside is, a special user mode application is required where cat(1)
worked before. I have sample code at http://people.redhat.com/zaitcev/linux/
and Paolo Abeni is working on patching libpcap.

This patch was initially written by Paolo and later I tweaked it, and
we had a little back-and-forth. So this is a jointly authored patch, but
I am submitting this I am responsible for the bugs.

Signed-off-by: Paolo Abeni <paolo.abeni@email.it>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:34 -08:00
John Daiker
7ca46b862f USB Gadget file_storage.c: remove unnecessary casts
Went looking through some usb stuff and found some unnecessary casts in
file_storage.c  This is part of the KernelJanitors TODO list.

Signed-off-by: John Daiker <daikerjohn@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:34 -08:00
Johannes Hölzl
52d67f0b5c USB: Bugfix for aircable: Add module and name to usb_serial_driver
While adding the dynamic-id support to usb serial I found a small bug in
the air cable driver:

Adds module and name information to the usb_serial_driver instance
of aircable. So the aircable driver is correctly shown under
/sys/bus/usb-serial/drivers/aircable and has the module link.

Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:34 -08:00
Johannes Hölzl
d9b1b78773 USB serial: add driver pointer to all usb-serial drivers
Every usb serial driver should have a pointer to the corresponding usb driver.
So the usb serial core can add a new id not only to the usb serial driver, but
also to the usb driver.

Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag
no_dynamic_id=1. This is added now.

Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:34 -08:00
Greg Kroah-Hartman
93bacefc4c USB serial: add dynamic id support to usb-serial core
Thanks to Johannes Hölzl <johannes.hoelzl@gmx.de> for fixing a few
things and getting it all working properly.

This adds support for dynamic usb ids to the usb serial core.  The file
"new_id" will show up under the usb serial driver, not the usb driver
associated with the usb-serial driver (yeah, it can be a bit confusing
at first glance...)

This patch also modifies the USB core to allow the usb-serial core to
reuse much of the dynamic id logic.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
2007-02-07 15:44:33 -08:00
Sylvain Munaut
495a678fc6 ohci: Add support for OHCI controller on the of_platform bus
PPC embedded systems can have a ohci controller builtin. In the
new model, it will end up as a driver on the of_platform bus,
this patches takes care of them.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:33 -08:00
Sylvain Munaut
5e16fabe5d ohci: Rework bus glue integration to allow several at once
The previous model had the module_init & module_exit function in the
bus glue .c files themselves. That's a problem if several glues need
to be selected at once and the driver is built has module. This case
is quite common in embedded system where you want to handle both the
integrated ohci controller and some extra controller on PCI.

The ohci-hcd.c file now provide the module_init & module_exit and
appropriate driver registering/unregistering is done conditionally,
using #ifdefs.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:33 -08:00
Ole Andre Vadla Ravnas
ad55d71a3d rndis_host learns ActiveSync basics
Windows Mobile 5 based devices described as supporting "ActiveSync":

 - Speak RNDIS but lack the CDC and union descriptors.  This patch
   updates the cdc ethernet code to fake ACM descriptors we need.

 - Require RNDIS_MSG_QUERY messages to include a buffer of the size the
   response should generate.  This patch updates the rndis host code to
   pass this will-be-ignored data.

The resulting RNDIS host code has been reported to work with several
WM5 based devices.

(Note that a fancier patch is available at synce.sf.net.)


Some bugfixes, affecting not just ActiveSync:
    (a)	when cleaning up after RNDS init fails, scrub the second interface
	just like cdc_ether does, so disconnect won't oops.
    (b)	handle peripherals that use the pad-to-end-of-packet option; some
	devices can't talk to us if that option doesn't work.
    (c)	when choosing configurations, don't forget about an RNDIS config
	just because the RNDIS driver is dynamically linked.

Cleanup, streamlining, bugfixes, Kconfig, and matching hub driver update.
Also for paranoia's sake, refuse to talk to something that looks like a
real modem instead of RNDIS.

Signed-off-by: Ole Andre Vadla Ravnaas <oleavr@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:33 -08:00
David Brownell
11d5489873 USB: ethernet gadget interop with MCCI Windows driver
It turns out that minor tweaks to the "CDC Subset" support in the Ethernet
gadget driver, just updating a config descriptor, let it be automagically
recognized by a Windows driver supported by MCCI.

This patch adds those descriptors, so systems using PXA 255 processors
(like Gumstix etc) can interop with those commercial MS-Windows drivers.
This is a Good Thing since Microsoft's RNDIS code has bugginess issues,
which are unfortunately compounded by "won't fix" issues as well as "the
published specs are incomplete and wrong" issues.  Being able to talk to
the MCCI driver gives Windows users another connectivity option.  (MCCI
also has CDC Ethernet drivers, which can help most non-PXA processors.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:33 -08:00
Alan Stern
1737bf2c5e usbcore: remove unneeded error check
This patch (as830) removes some unnecessary error checking.  According
to the kerneldoc, schedule_work() can't fail.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:33 -08:00
David Brownell
2360e4aa64 USB: indicate active altsetting in proc/bus/usb/devices file
Update /proc/bus/usb/devices output to report active altsettings.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:33 -08:00
Dan Carpenter
316547fdfa USB: devio.c add missing INIT_LIST_HEAD()
It should hopefully fix the list corruption bug on:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=214402

Add a missing INIT_LIST_HEAD()

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:33 -08:00
Oliver Neukum
2cba72f025 USB: mutexification of rio500
this makes the rio500 misc usb driver use mutexes and turns uninterruptible
sleep into interruptible sleep where the semantics are not affected.

Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:32 -08:00
Tobias Klauser
4727810705 USB: Remove unneeded void * casts in idmouse.c
The patch removes unneeded void * casts for the following (void *) pointers:
- struct file: private_data

The patch also contains some whitespace and coding style cleanups in the
relevant areas.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:32 -08:00
David Brownell
5f84813774 USB: <linux/usb_ch9.h> becomes <linux/usb/ch9.h>
This moves <linux/usb_ch9.h> to <linux/usb/ch9.h> to reduce some of the
clutter of usb header files.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:32 -08:00
Benjamin Herrenschmidt
d728e327d4 USB: Fix EHCI warning
This patch fixes a warning introduced by the big endian MMIO EHCI
support patch on platforms that don't have readl_be/writel_be variants
(though mostly harmless as those are called in an if (0) statement,
but gcc still warns).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2007-02-07 15:44:32 -08:00
Benjamin Herrenschmidt
b32e904d54 USB: Fix OHCI warning
This patch fixes a warning introduces by the split endian OHCI support
patch on platforms that don't have readl_be/writel_be variants (though
mostly harmless as those are called in an if (0) statement, but gcc
still warns).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:32 -08:00
Benjamin Herrenschmidt
083522d766 USB: Implement support for EHCI with big endian MMIO
This patch implements supports for EHCI controllers whose MMIO
registers are big endian and enables that functionality for
the Toshiba SCC chip. It does _not_ add support for big endian
in-memory data structures as this is not needed for that chip
and I hope it will never be.

The guts of the patch are to convert readl(...) to
ehci_readl(ehci, ...) and similarly for register writes.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:32 -08:00
Benjamin Herrenschmidt
11d1a4aa8d USB: Implement support for "split" endian OHCI
This patch separates support for big endian MMIO register access
and big endian descriptors in order to support the Toshiba SCC
implementation which has big endian registers but little endian
in-memory descriptors.

It simplifies the access functions a bit in ohci.h while at it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:31 -08:00
Benjamin Herrenschmidt
4302a595cd USB: Rework the OHCI quirk mecanism as suggested by David
This patch applies David Brownell's suggestion for reworking the
OHCI quirk mechanism via a table of PCI IDs. It adapts the existing
quirks to use that mechanism.

This also moves the quirks to reset() as suggested by the comment
in there. This is necessary as we need to have the endian properly
set before we try to init the controller.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:31 -08:00
Greg Kroah-Hartman
0873c76485 USB: convert usb class devices to real devices
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:31 -08:00
Greg Kroah-Hartman
7bc3d63562 USB: move usb_device_class class devices to be real devices
This moves the usb class devices that control the usbfs nodes to show up
in the proper place in the larger device tree.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:30 -08:00
Greg Kroah-Hartman
6e8cf7751f USB: add EPIC support to the io_edgeport driver
This patch adds EPiC support to the io_edgeport driver which adds
support for a number of NCR printers:
	- NCR (Axiohm) 7401-K580 printer
	- NCR (TEC) 7401-K590 printer, 7402-K592
	- NCR (TEC) 7167, 7168 printers
	- NCR (TEC) 7197, 7198, F306, F307, F309 printers
	- NCR (Axiohm) 7194 printer
	- NCR (Axiohm) 7158 printer
and a few more.

It is based on the 2.6.19 kernel.

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2007-02-07 15:44:30 -08:00
Luiz Fernando N. Capitulino
20b2e28fc5 USB: unusual_devs.h for Sony floppy
This patch increases the range for 0x054c:0x002c devices to make
the following Sony USB floppy to work:

T:  Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=054c ProdID=002c Rev=20.00
S:  Manufacturer=SONY
S:  Product=USB Floppy
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=04 Prot=00 Driver=usb-storage
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl=127ms

Signed-off-by: Marcelo Ricardo Leitner <mrl@mandriva.com>
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:44:30 -08:00
Linus Torvalds
21d37bbc65 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (140 commits)
  ACPICA: reduce table header messages to fit within 80 columns
  asus-laptop: merge with ACPICA table update
  ACPI: bay: Convert ACPI Bay driver to be compatible with sysfs update.
  ACPI: bay: new driver is EXPERIMENTAL
  ACPI: bay: make drive_bays static
  ACPI: bay: make bay a platform driver
  ACPI: bay: remove prototype procfs code
  ACPI: bay: delete unused variable
  ACPI: bay: new driver adding removable drive bay support
  ACPI: dock: check if parent is on dock
  ACPICA: fix gcc build warnings
  Altix: Add ACPI SSDT PCI device support (hotplug)
  Altix: ACPI SSDT PCI device support
  ACPICA: reduce conflicts with Altix patch series
  ACPI_NUMA: fix HP IA64 simulator issue with extended memory domain
  ACPI: fix HP RX2600 IA64 boot
  ACPI: build fix for IBM x440 - CONFIG_X86_SUMMIT
  ACPICA: Update version to 20070126
  ACPICA: Fix for incorrect parameter passed to AcpiTbDeleteTable during table load.
  ACPICA: Update copyright to 2007.
  ...
2007-02-07 15:36:08 -08:00
Dave Jones
2f65168de7 Driver Core: Increase the default timeout value of the firmware subsystem
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=174589

The ipw driver sometimes takes a long time to load its firmware.
Whilst the ipw driver should be using the async interface of
the firmware loader to make this a non-issue, this is a minimal fix.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:14 -08:00
Kay Sievers
b7a3e813fb Driver core: allow to delay the uevent at device creation time
For the block subsystem, we want to delay all uevents until the
disk has been scanned and allpartitons are already created before
the first event is sent out.

Signed-off-by: Kay Sievers <kay.sievers@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:14 -08:00
Kay Sievers
f9f852df2f Driver core: add device_type to struct device
This allows us to add type specific attributes, uevent vars and
release funtions.

A subsystem can carry different types of devices like the "block"
subsys has disks and partitions. Both types create a different set
of attributes, but belong to the same subsystem.

This corresponds to the low level objects:
  kobject   -> device       (object/device data)
  kobj_type -> device_type  (type of object/device we are embedded in)
  kset      -> class/bus    (list of objects/devices of a subsystem)

Signed-off-by: Kay Sievers <kay.sievers@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:14 -08:00
Kay Sievers
239378f16a Driver core: add uevent vars for devices of a class
Devices converted from class_device to device should have
the same uevent keys as the original class_device had. We
search up the parents until we find the first bus device and
add the (already deprecated) PHYDEV* values.

Signed-off-by: Kay Sievers <kay.sievers@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:13 -08:00
Cornelia Huck
cb986b749c driver core: Change function call order in device_bind_driver().
Change function call order in device_bind_driver().

If we create symlinks (which might fail) before adding the device to the list
we don't have to clean up afterwards (which we didn't).

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:13 -08:00
Cornelia Huck
c578abbc20 driver core: Don't stop probing on ->probe errors.
Don't stop on the first ->probe error that is not -ENODEV/-ENXIO.

There might be a driver registered returning an unresonable return code, and
this stops probing completely even though it may make sense to try the next
possible driver. At worst, we may end up with an unbound device.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:12 -08:00
Cornelia Huck
fbfb144553 driver core fixes: device_register() retval check in platform.c
Check the return value of device_register() in platform_bus_init().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:12 -08:00
Cornelia Huck
cb360bbf63 driver core fixes: make_class_name() retval checks
Make make_class_name() return NULL on error and fixup callers in the
driver core.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:12 -08:00
Greg Kroah-Hartman
80f745fb1b USB: add the sysfs driver name to all modules
This adds the module name to all USB drivers, if they are built into the
kernel or not.  It will show up in /sys/modules/MODULE_NAME/drivers/

Cc: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:12 -08:00
Greg Kroah-Hartman
4b315627e6 SERIO: add the sysfs driver name to all modules
This adds the module name to all SERIO drivers, if they are built into
the kernel or not.  It will show up in /sys/modules/MODULE_NAME/drivers/

Cc: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:12 -08:00
Greg Kroah-Hartman
725522b545 PCI: add the sysfs driver name to all modules
This adds the module name to all PCI drivers, if they are built into the
kernel or not.  It will show up in /sys/modules/MODULE_NAME/drivers/

It also fixes up the IDE core, which was calling __pci_register_driver()
directly.

Cc: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:12 -08:00
Cornelia Huck
c744aeae9d driver core: Allow device_move(dev, NULL).
If we allow NULL as the new parent in device_move(), we need to make sure
that the device is placed into the same place as it would if it was
newly registered:

- Consider the device virtual tree. In order to be able to reuse code,
  setup_parent() has been tweaked a bit.
- kobject_move() can fall back to the kset's kobject.
- sysfs_move_dir() uses the sysfs root dir as fallback.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:11 -08:00
Cornelia Huck
717e48c29d driver core: Remove device_is_registered() in device_move().
device_is_registered() will always be false for a device with no bus. Remove
this check and trust the caller to know what they're doing.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:11 -08:00
Greg Kroah-Hartman
43cb76d91e Network: convert network devices to use struct device instead of class_device
This lets the network core have the ability to handle suspend/resume
issues, if it wants to.

Thanks to Frederik Deweerdt <frederik.deweerdt@gmail.com> for the arm
driver fixes.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:11 -08:00
Greg Kroah-Hartman
2943ecf2ed Driver core: convert SPI code to use struct device
Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.

Cc: <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:11 -08:00
Greg Kroah-Hartman
873733188a Driver core: convert pcmcia code to use struct device
Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.

Cc: <linux-pcmcia@lists.infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:11 -08:00
Andrew Morton
1e8f34f7d8 ide-acpi support warning fix
drivers/ide/ide-acpi.c: In function 'ide_acpi_get_timing':
drivers/ide/ide-acpi.c:537: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:19:42 +01:00
Hannes Reinecke
e3a59b4d93 ACPI support for IDE devices
This patch implements ACPI integration for generic IDE devices.
The ACPI spec mandates that some methods are called during suspend and
resume. And consequently there most modern Laptops cannot resume
properly without it.

According to the spec, we should call '_GTM' (Get Timing) upon suspend
to store the current IDE adapter settings.
Upon resume we should call '_STM' (Set Timing) to initialize the
adapter with the stored settings; afterwards '_GTF' (Get Taskfile)
should be called which returns a buffer with some IDE initialisation
commands. Those commands should be passed to the drive.

There are two module params which control the behaviour of this patch:

'ide=noacpi'
	Do not call any ACPI methods (Disables any ACPI method calls)
'ide=acpigtf'
	Enable execution of _GTF methods upon resume.
	Has no effect if 'ide=noacpi' is set.
'ide=acpionboot'
	Enable execution of ACPI methods during boot.
	This might be required on some machines if 'ide=acpigtf' is
	selected as some machines modify the _GTF information
	depending on the drive identification passed down with _STM.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:19:37 +01:00
Mark Lord
78281c5350 IDE Driver for Delkin/Lexar/etc.. cardbus CF adapter
On Thursday 11 January 2007 23:17, Bartlomiej Zolnierkiewicz wrote:
> 
> My working IDE tree (against Linus' tree) now resides here:
> 
> 	http://kernel.org/pub/linux/kernel/people/bart/pata-2.6/patches/

Bart, here's a driver I've been keeping out-of-tree for the past couple
of years.  This is for the Delking/Lexar/ASKA/etc.. 32-bit cardbus IDE
CompactFlash adapter card.

It's probably way out of sync with the latest driver model (??), but it
still builds/works.  I'm not interested in doing much of a rewrite, other
than for libata someday, as I no longer use the card myself.

But lots of other people do seem to use it, so it might be nice to see it
"in-tree".

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:19:32 +01:00
Bartlomiej Zolnierkiewicz
6788182602 ide: it8213 IDE driver update (version 2)
* set ATAPI/IORDY/TIME bits correctly in it8213_tuneproc()
* fix UDMA/MWDMA/SWDMA masks in it8213_init_hwif()
* in it8213_tune_chipset() SWDMA2 mode should be used instead of MWDMA0
* backport various fixes from piix/slc90e66 drivers:
  - in it8213_tuneproc() the highest possible PIO mode is PIO4 (not PIO5)
  - clear ATAPI/IORDY/TIME bits before setting them also for slave device
  - use ->speedproc in it8213_config_drive_for_dma()
  - don't try to tune PIO in config_chipset_for_pio()
  - simplify is_slave calculation in it8213_tuneproc()
  - misc cleanups
* fix it8213_ratemask() and it8213_tuneproc() comments
* simplify it8213_init_hwif()
* remove init_chipset_it8213()
* add missing Copyrights and update MODULE_AUTHOR()
* CodingStyle cleanups
* remove dead code

v2:
* PCI_DEVICE_ID_ITE_8213 is only defined in -mm kernels,
  so just use PCI Device ID (0x8213) directly
* fix ->ultra_mask incorrectly changed to 0x3f in v1 version of the patch

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:19:26 +01:00
Jack Lee
9c6712c0bc ide: add it8213 IDE driver
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:19:09 +01:00
Bartlomiej Zolnierkiewicz
a534b68da0 tc86c001: add missing __init tag for tc86c001_ide_init()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:19:09 +01:00
Andrew Morton
ba59c4b84a tc86c001: mark init_chipset_tc86c001() with __devinit tag
Signed-off-by: Andrew Morton <akpm@osdl.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:19:01 +01:00
Adrian Bunk
e8ab7f536f tc86c001: init_hwif_tc86c001() can be static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:52 +01:00
Sergei Shtylyov
33dced2ea5 ide: add Toshiba TC86C001 IDE driver (take 2)
This is the driver for the Toshiba TC86C001 GOKU-S PCI IDE controller,
completely reworked from the original brain-damaged Toshiba's 2.4 version.

This single channel UltraDMA/66 controller is very simple in programming,
yet Toshiba managed to plant many interesting bugs in it.  The particularly
nasty "limitation 5" (as they call the errata) caused me to abuse the IDE
core in a possibly most interesting way so far.  However, this is still
better than the #ifdef mess in drivers/ide/ide-io.c that the original
version included (well, it had much more mess)...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:45 +01:00
Sergei Shtylyov
d24ec426b3 pdc202xx_new: remove check_in_drive_lists abomination
Fold check_in_drive_lists() into quirkproc() handler in both PDC202xx
drivers-- this function was never called with a list other than
pdc_quirk_drives and was a bad example of code overall...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:39 +01:00
Sergei Shtylyov
272103144a pdc202xx_new: remove useless code
Remove the following useless fragments from the driver:

- the ide_dma_lostirq() and ide_dma_timeout() handlers which boil down to just
  printing the incoherent reset message and calling their default counterparts;

- check for non-NULL drive->id in the ide_dma_check() handler -- this is assumed
  to be true by all other handlers (also, get rid of unnecessary nesting of the
  conditional statements there);

- the comment before pdcnew_tune_drive() which has nothing to do with the code.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:37 +01:00
Sergei Shtylyov
24e6458d9c slc90e66: carry over fixes from piix driver
Synchronize with version 0.46 of the Intel PIIX/ICH driver:

- carry over Alan's and my own fixes in the tuneproc() method and my cleanups
  both there and in the ratemask() method;

- SLC90E66 only supports MW DMA modes 1/2 and SW DMA mode 2 (just like Intel
  chips), so don't claim support for other MW/SW DMA modes;

- don't check dor non-NULL drive->id in the ide_dma_check() method -- this is
  assumed to be true in all other drivers;

- do some coding/formatting cleanups while at it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:34 +01:00
Sergei Shtylyov
30dfd12f53 piix: tuneproc() fixes/cleanups
Fix/cleanup the driver's tuneproc() and ratemask() methods:

- PPE, IE, and TIME bits need to be cleared beforehand for the slave drive as
  well as master (Alan probably just forgot about it);

- this driver only supports PIO modes up to 4, so must pass the correct limit
  to ide_get_best_pio_mode();

- use min_t() macro instead of min();

- simplify slave vs master drive evaluation;

- do come coding and formatting cleanups...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:28 +01:00
Sergei Shtylyov
d287223973 piix: fix 82371MX enablebits
According to the datasheet, Intel 82371MX (MPIIX) actually has only a
single IDE channel mapped to the primary or secondary ports depending on
the value of the bit 14 of the IDETIM register at PCI config.  offset 0x6C
(the register at 0x6F which the driver refers to.  doesn't exist).  So,
disguise the controller as dual channel and set enablebits masks/values
such that only either primary or secondary channel is detected enabled. 
Also, preclude the IDE probing code from reading PCI BARs, this controller
just doesn't have them (it's not the separate PCI function like the other
PCI controllers), it only decodes the legacy addresses.

[ Alan sayeth " MPIIX does not work with or without the change.  It needs its
  own different driver and not to use setup-pci.  Huge job and since it works
  well with libata who cares.  Ditto the early PIIX chip." ]

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:25 +01:00
Sergei Shtylyov
6273d26a5b hpt366: HPT36x PCI clock detection fix
Fix minor coding mistake in the HPT36x PCI clock detection code noticed by
Bartlomiej Zolnierkiewicz -- it always reported 33 MHz due to the missing
'break' statements.  This, however, most probably never mattered -- in fact, I
was thinking of removing the 25/40 MHz cases completely since HPT36x BIOSes
didn't seem to set any other value than 7 into the 'cmd_high_time' field, i.e.
 supported only 33 MHz PCI.

Note that in the original driver there was another bug: 25 and 40 MHz cases
were interchanged.  Since the 'cmd_high_time' field is in units of PCI clocks,
a lower clock count just *cannot* correspond to a higher frequency, i.  e.  it
should be 5 for 25 MHz PCI and 9 for 40 MHz PCI, not the other way around.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:20 +01:00
Sergei Shtylyov
7b73ee05d0 hpt366: init code rewrite
Finally, rework the driver init.  code to correctly handle all the chip
variants HighPoint has created so far.  This should cure the rest of the
timing issues in the driver (especially, on 66 MHz PCI) caused by the
HighPoint's habit of switching the base DPLL clock with every new revision
of the chips...

  - switch to using the enumeration type to differ between the numerous chip
    variants, matching PCI device/revision ID with the chip type early, at the
    init_setup stage;

  - extend the hpt_info structure to hold the DPLL and PCI clock frequencies,
    stop duplicating it for each channel by storing the pointer in the pci_dev
    structure: first, at the init_setup stage, point it to a static "template"
    with only the chip type and its specific base DPLL frequency, the highest
    supported DMA mode, and the chip settings table pointer filled, then, at
    the init_chipset stage, allocate per-chip instance  and fill it with the
    rest of the necessary information;

  - get rid of the constant thresholds in the HPT37x PCI clock detection code,
    switch  to calculating  PCI clock frequency based on the chip's base DPLL
    frequency;

  - switch to using the DPLL clock and enable UltraATA/133 mode by default on
    anything newer than HPT370/A;

  - fold PCI clock detection and DPLL setup code into init_chipset_hpt366(),
    unify the HPT36x/37x setup code and the speedproc handlers by joining the
    register setting lists into the table indexed by the clock selected;

  - add enablebits for all the chips to avoid touching disabled channels
    (though the HighPoint BIOS seem to only disable the primary one on
    HPT371/N);

  - separate the UltraDMA and MWDMA masks there to avoid changing PIO timings
    when setting an UltraDMA mode in hpt37x_tune_chipset().

This version has been tested on HPT370/302/371N.

Thanks to Alan for the inspiration. Hopefully, his libata driver will also
benefit from the work done on this "obsolete" driver...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:16 +01:00
Sergei Shtylyov
4bf63de27e hpt366: clean up DMA timeout handling for HPT370
Clean up DMA timeout handling for HPT370:

- hpt370_lostirq_timeout() cleared the DMA status which made __ide_dma_end()
   called afterwards return the incorrect result, and the DMA engine was reset
   both before and after stopping DMA while the HighPoint drivers only do it
   after (which seems logical) -- fix this and also rename the function;

- get rid of the needless mutual recursion in hpt370_ide_dma_end() and
   hpt370_ide_dma_timeout();

- get rid of hpt370_lostirq_timeout() since hwif->ide_dma_end() called from
   the driver's interrupt handler later does all its work.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:13 +01:00
Sergei Shtylyov
26ccb802ee hpt366: merge HPT37x speedproc handlers
Continue with the driver rewrite:

- move the interrupt twiddling code from the speedproc handlers into the
    init_hwif_hpt366 which allows to merge the two HPT37x speedproc handlers
    into one;

- get rid of in init_hpt366 which solely consists of the duplicate code, then
    fold init_hpt37x() into init_chipset_hpt366();

- fix hpt3xx_tune_drive() to always set the PIO mode requested, not the best
    possible one, change hpt366_config_drive_xfer_rate() accordingly, simplify
    it a bit;

- group all the DMA related code together init_hwif_hpt366(), and generally
    clean up and beautify it.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:11 +01:00
Sergei Shtylyov
abc4ad4c6b hpt366: cache channel's MCR address
Begin the real driver redesign. For the starters:

- cache the offset of the IDE channel's MISC. control registers which are used
   throughout the driver in hwif->select_data;

- only touch the relevant MCR when detecting the cable type on HPT374's
   function 1;

- make HPT36x's speedproc handler look the same way as HPT37x ones; fix the
   PIO timing register mask for HPT37x.

- rename all the HPT3xx register related variables consistently; clean up the
   whitespace.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:18:05 +01:00
Sergei Shtylyov
b4586715d7 hpt366: switch to using pci_get_slot
Switch to using pci_get_slot() to get to the function 1 of HPT36x/374 chips --
there's no need for the driver itself to walk the list of the PCI devices, and
it also forgets to check the bus number of the device found.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:17:54 +01:00
Sergei Shtylyov
90778574c9 hpt366: print the real chip name at startup
- Rework the driver setup code so that it prefixes the driver startup
  messages with the real chip name.

- Print the measured f_CNT value and the DPLL setting for non-HPT3xx
  chips as well.

- Claim the extra 240 bytes of I/O space for all chips, not only for
  those having PCI device ID of 0x0004.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:17:51 +01:00
Andrew Morton
f36702b4de hpt366: rework rate filtering tidy
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:17:37 +01:00
Sergei Shtylyov
e139b0b02f hpt366: rework rate filtering
- Rework hpt3xx_ratemask() and hpt3xx_ratefilter() so that the former
  returns the max.  mode computed at the load time and doesn't have to do
  bad Ultra33 drive list lookups anymore; remove the duplicate code from
  the latter function.  Move the quirky drive list lookup into
  hpt3xx_quirkproc() where it should have been from the start...

- Disable UltraATA/100 for HPT370 by default as the 33 MHz ATA clock
  being used does not allow for it, and this *greatly* increases the
  transfer speed.

- Save some space by using byte-wide fields in struct hpt_info; switch to
  reading the 8-bit PCI revision ID reg.  only, not the whole 32-bit reg.

- Start incrementing the driver version number with each patch (should
  have been done from the first one posted).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:17:37 +01:00
Paul Mackerras
8423200553 Merge branch 'linux-2.6' 2007-02-07 14:05:13 +11:00
Ishizaki Kou
3cdc20e517 [POWERPC] Celleb: hypervisor console driver
This patch adds hypervisor console driver for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Vitaly Bordug
5427828e83 [POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads
Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the
current kernel. Current patch fixes it, as well as other inconsistencies
expressed, that do not permit targets from working properly:

- Updated dts with a chosen node with interrupt controller,
- fixed messed device IDs among CPM2 SoC devices,
- corrected odd header name and fixed type in defines,
- Added 82xx subdir to the powerpc/platforms Makefile, missed during
  initial commit,
- new solely-powerpc header file for 8260 family (was using one from
  arch/ppc, this one cleaned up from the extra stuff), in fact for now
  a placeholder to get the board-specific includes for stuff not yet
  capable to live with devicetree peeks only
- Fixed couple of misprints in reference mpc8272 dts.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Geoff Levand
97ec167599 [POWERPC] PS3: Move vuart declarations to ps3.h
Move the structures and routines needed for PS3 vuart port device registration
to asm-powerpc/ps3.h.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Geoff Levand
2a08ea69a3 [POWERPC] PS3: Move system bus to platform directory
Move the PS3 system bus routines from drivers/ps3 to
arch/powerpc/platforms/ps3.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Robert P. J. Day
63c2f782e8 [POWERPC] Add "is_power_of_2" checking to log2.h.
Add the inline function "is_power_of_2()" to log2.h, where the value
zero is *not* considered to be a power of two.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Geoff Levand
861be32ce7 [POWERPC] ps3: bind interrupt to cpu
Change the PS3 irq allocation routines to take an argument indicating which
cpu (processor thread) the interrupt should be serviced on.

The current system configuration favors device interrupts that are serviced
on cpu0, so that is used as the default.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:18 +11:00
Benjamin Herrenschmidt
43d80439c5 [POWERPC] ps3: system bus minor mmio fix
Fix two minor bugs in the PS3 system bus mmio region code.  First, on error or
when freeing a region, retain the bus_addr and len fields to allow subsequent
calls to create the region.  Second, correct the region address argument to the
lv1_unmap_device_mmio_region() call.

Fixes modprobe/rmmod of some drivers.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Vitaly Bordug
f25222b995 [POWERPC] cpm_uart: OF-related fix for CPM1
This makes cpm uart able to work using OF-passed parameters
in case of CPM stuff (found on most mpc8xx reference and custom
boards). The idea is to keep ppc stuff working yet making it able to be
used for powerpc.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 12:00:32 +11:00
Jiri Kosina
b7e36bfa9f NET: turn local_save_flags() + local_irq_disable() into local_irq_save()
drivers/net/amd8111e.c::amd8111e_poll() contains local_irq_disable() after
local_save_flags().  Turn it into local_irq_save().

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06 19:10:34 -05:00
Jiri Kosina
0d38ff1d3d NET-3c59x: turn local_save_flags() + local_irq_disable() into local_irq_save()
drivers/net/3c59x.c::poll_vortex() contains local_irq_disable() after
local_save_flags().  Turn it into local_irq_save().

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06 19:10:33 -05:00
Richard Knutsson
7e3e8b05a9 hp100: convert pci_module_init() to pci_register_driver()
Convert pci_module_init() to pci_register_driver().

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06 19:10:33 -05:00
Amit S. Kale
27d2ab54bd NetXen: Added ethtool support for user level tools.
NetXen: Added ethtool support for user level firmware management utilities.

Signed-off-by: Amit S. Kale <amitkale@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06 19:08:03 -05:00
Amit S. Kale
1fcca1a5fc NetXen: Firmware crb init changes.
NetXen: firmware crb init changes.

Signed-off-by: Amit S. Kale <amitkale@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06 19:08:03 -05:00
Stephen Hemminger
a407a6a085 skge: version 1.10
Mark this as 1.10 because WOL now works

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06 19:07:44 -05:00
Stephen Hemminger
a504e64ab4 skge: WOL support
Add WOL support for Yukon chipsets in skge device.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06 19:07:44 -05:00
Stephen Hemminger
1479d13cb5 skge: use dev_printk
Use dev_printk related macros for PCI related errors and warnings

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06 19:07:44 -05:00
Stephen Hemminger
fae8759228 skge: handle zero address at open
Some motherboards are broken and have no address set. Failing at probe time
prevents the device from ever being used (like to download a fixed BIOS). Instead
warn on probe and check again when device is brought up. That way the address
can be set.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06 19:07:44 -05:00
Al Viro
a7bed27dc6 b44 endian annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06 19:03:56 -05:00
Linus Torvalds
2ac04a1597 Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  USB HID: handle multi-interface devices for Apple macbook pro properly
  HID: move away from DEBUG defines in favor of CONFIG_HID_DEBUG
  USB HID: fix bogus comment in hid_get_class_descriptor()
  USB HID: remove hid_find_field_by_usage()
  HID: API - fix leftovers of hidinput API in USB HID
  HID: hid debug from hid-debug.h to hid layer
  hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter
  hid: quirk for multi-input devices with unneeded output reports
  hid: allow force feedback for multi-input devices
2007-02-06 14:56:37 -08:00
Linus Torvalds
0c7d375711 Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Remove obsolete prototypes
  IB/ehca: Remove use of do_mmap()
  RDMA/addr: Handle ethernet neighbour updates during route resolution
  IB: Make sure struct ib_user_mad.data is aligned
  IB/srp: Don't wait for response when QP is in error state.
  IB: Return qp pointer as part of ib_wc
  IB: Include <linux/kref.h> explicitly in <rdma/ib_verbs.h>
2007-02-06 14:55:33 -08:00
Linus Torvalds
2442d31099 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (32 commits)
  mmc: tifm: replace kmap with page_address
  mmc: sdhci: fix voltage ocr
  mmc: sdhci: replace kmap with page_address
  mmc: wbsd: replace kmap with page_address
  mmc: handle pci_enable_device() return value in sdhci
  mmc: Proper unclaim in mmc_block
  mmc: change wbsd mailing list
  mmc: Graceful fallback for fancy features
  mmc: Handle wbsd's stupid command list
  mmc: Allow host drivers to specify max block count
  mmc: Allow host drivers to specify a max block size
  tifm_sd: add suspend and resume functionality
  tifm_core: add suspend/resume infrastructure for tifm devices
  tifm_7xx1: prettify
  tifm_7xx1: recognize device 0xac8f as supported
  tifm_7xx1: switch from workqueue to kthread
  tifm_7xx1: Merge media insert and media remove functions
  tifm_7xx1: simplify eject function
  Add dummy_signal_irq function to save check in ISR
  Remove unused return value from signal_irq callback
  ...
2007-02-06 14:54:54 -08:00
Richard Knutsson
09cb914f09 [CRYPTO] geode: Convert pci_module_init() to pci_register_driver()
Replace uses of the obsolete pci_module_init function.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-02-07 09:21:02 +11:00
Len Brown
57e1c5c87d Pull test into release branch 2007-02-06 15:31:00 -05:00
Len Brown
76a2e849df Pull acpica into test branch 2007-02-06 15:30:03 -05:00
Len Brown
03c6d130f6 ACPICA: reduce table header messages to fit within 80 columns
Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-06 15:28:23 -05:00
Olof Johansson
f5cd787276 PA Semi PWRficient Ethernet driver
Driver for the PA Semi PWRficient on-chip Ethernet (1/10G)

Basic enablement, will be complemented with performance enhancements
over time. PHY support will be added as well.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:52 -05:00
Ralf Baechle
1ee6dd770b s2io: De-typedef driver.
Removed namespace collisions due to usage of nic_t as per Ralf's patch

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:52 -05:00
Sivakumar Subramani
a113ae066d s2io: Removed enabling of some of the unused interrupts.
Removed unused code in en_dis_able_nic_intrs(), TX_DMA_INTR, RX_DMA_INTR,
TX_XGXS_INTR, MC_INTR

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:52 -05:00
Sivakumar Subramani
372cc5972d s2io: Fixes in updating skb->truesize and code cleanup.
1. Fix for updating skb->truesize properly.
2. Disable NAPI only if more than one ring configured in case of MSI/MSI-X
   interrupts. Previously we were disabling NAPI irrespective of number of
   rings when MSI/MSI-X interrupts were used.
3. Code cleanup.

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Sivakumar Subramani
19a605220c S2IO: Fixes for reset and link handling.
1. Fix for reset and link handling.
2. Allow for promiscuos mode and multicast state be maintained through
   ifconfig up and down.
3. Support to print adapter serial number.

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Sivakumar Subramani
db874e65ae s2io: Making LRO and UFO as module loadable parameter.
This patch adds two load parameters napi and ufo. Previously NAPI was
compilation option with these changes wan enable disable NAPI using load
parameter. Also we are introducing ufo load parameter to enable/disable
ufo feature

Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Krzysztof Halasa
7517c1b787 PC300too alternative WAN driver
The attached patch adds an alternative driver "pc300too" for PCI WAN
cards PC300/RSV and PC300/X21 made by Cyclades Corp. (now Avocent Corp).

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Divy Le Ray
1d68e93d65 cxgb3 - Add dual licensing
Dual licensing, needed for OFED 1.2

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Divy Le Ray
a13fbee086 cxgb3 - Add <linux/mutex.h>
Include <linux/mutex.h> in adapter.h

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Divy Le Ray
f2aa52086f cxgb3 - Remove BUG_ON from t3b_intr_napi
In some cases, SG_DATA_INTR won't clear on read and the following
interrupt may cause us to assert because NAPI is already scheduled.
Remove the assertion, NAPI can handle attempts to rearm it while
it's already scheduled.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Divy Le Ray
f2c6879e06 cxgb3 - white space to tabs
Use tabs in comments.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00
Divy Le Ray
3b1d307b31 cxgb3 - Clean up HW init routine
Clean up the tp_config() routine.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:50 -05:00