Commit Graph

914 Commits

Author SHA1 Message Date
Jens Axboe
1eff9d322a block: rename bio bi_rw to bi_opf
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07 14:41:02 -06:00
Shaohua Li
3f35e210ed Merge branch 'mymd/for-next' into mymd/for-linus 2016-07-28 09:34:14 -07:00
Shaohua Li
5d8817833c MD: fix null pointer deference
The md device might not have personality (for example, ddf raid array). The
issue is introduced by 8430e7e0af9a15(md: disconnect device from personality
before trying to remove it)

Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-07-28 09:06:34 -07:00
Tomasz Majchrzak
573275b58e md: add missing sysfs_notify on array_state update
Changeset 6791875e2e has added early return from a function so there is no
sysfs notification for 'active' and 'clean' state change.

Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-07-19 11:28:39 -07:00
Alexey Obitotskiy
4cb9da7d9c Fix kernel module refcount handling
md loads raidX modules and increments module refcount each time level
has changed but does not decrement it. You are unable to unload raid0
module after reshape because raid0 reshape changes level to raid4
and back to raid0.

Signed-off-by: Aleksey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-07-19 11:17:31 -07:00
Arnd Bergmann
0e3ef49eda md: use seconds granularity for error logging
The md code stores the exact time of the last error in the
last_read_error variable using a timespec structure. It only
ever uses the seconds portion of that though, so we can
use a scalar for it.

There won't be an overflow in 2038 here, because it already
used monotonic time and 32-bit is enough for that, but I've
decided to use time64_t for consistency in the conversion.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-07-19 11:00:47 -07:00
NeilBrown
d787be4092 md: reduce the number of synchronize_rcu() calls when multiple devices fail.
Every time a device is removed with ->hot_remove_disk() a synchronize_rcu() call is made
which can delay several milliseconds in some case.
If lots of devices fail at once - as could happen with a large RAID10 where one set
of devices are removed all at once - these delays can add up to be very inconcenient.

As failure is not reversible we can check for that first, setting a
separate flag if it is found, and then all synchronize_rcu() once for
all the flagged devices.  Then ->hot_remove_disk() function can skip the
synchronize_rcu() step if the flag is set.

fix build error(Shaohua)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-13 11:54:22 -07:00
NeilBrown
8430e7e0af md: disconnect device from personality before trying to remove it.
When the HOT_REMOVE_DISK ioctl is used to remove a device, we
call remove_and_add_spares() which will remove it from the personality
if possible.  This improves the chances that the removal will succeed.

When writing "remove" to dev-XX/state, we don't.  So that can fail more easily.

So add the remove_and_add_spares() into "remove" handling.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-13 11:54:12 -07:00
Xiao Ni
4ba1e78891 MD:Update superblock when err == 0 in size_store
This is a simple check before updating the superblock. It should update
the superblock when update_size return 0.

Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-13 11:54:11 -07:00
Cong Wang
5b1f5bc332 md: use a mutex to protect a global list
We saw a list corruption in the list all_detected_devices:

 WARNING: CPU: 16 PID: 226 at lib/list_debug.c:29 __list_add+0x3c/0xa9()
 list_add corruption. next->prev should be prev (ffff880859d58320), but was ffff880859ce74c0. (next=ffffffff81abfdb0).
 Modules linked in: ahci libahci libata sd_mod scsi_mod
 CPU: 16 PID: 226 Comm: kworker/u241:4 Not tainted 4.1.20 #1
 Hardware name: Dell Inc. PowerEdge C6220/04GD66, BIOS 2.2.3 11/07/2013
 Workqueue: events_unbound async_run_entry_fn
  0000000000000000 ffff880859a5baf8 ffffffff81502872 ffff880859a5bb48
  0000000000000009 ffff880859a5bb38 ffffffff810692a5 ffff880859ee8828
  ffffffff812ad02c ffff880859d58320 ffffffff81abfdb0 ffff880859eb90c0
 Call Trace:
  [<ffffffff81502872>] dump_stack+0x4d/0x63
  [<ffffffff810692a5>] warn_slowpath_common+0xa1/0xbb
  [<ffffffff812ad02c>] ? __list_add+0x3c/0xa9
  [<ffffffff81069305>] warn_slowpath_fmt+0x46/0x48
  [<ffffffff812ad02c>] __list_add+0x3c/0xa9
  [<ffffffff81406f28>] md_autodetect_dev+0x41/0x62
  [<ffffffff81285862>] rescan_partitions+0x25f/0x29d
  [<ffffffff81506372>] ? mutex_lock+0x13/0x31
  [<ffffffff811a090f>] __blkdev_get+0x1aa/0x3cd
  [<ffffffff811a0b91>] blkdev_get+0x5f/0x294
  [<ffffffff81377ceb>] ? put_device+0x17/0x19
  [<ffffffff8128227c>] ? disk_put_part+0x12/0x14
  [<ffffffff812836f3>] add_disk+0x29d/0x407
  [<ffffffff81384345>] ? __pm_runtime_use_autosuspend+0x5c/0x64
  [<ffffffffa004a724>] sd_probe_async+0x115/0x1af [sd_mod]
  [<ffffffff81083177>] async_run_entry_fn+0x72/0x12c
  [<ffffffff8107c44c>] process_one_work+0x198/0x2ce
  [<ffffffff8107cac7>] worker_thread+0x1dd/0x2bb
  [<ffffffff8107c8ea>] ? cancel_delayed_work_sync+0x15/0x15
  [<ffffffff8107c8ea>] ? cancel_delayed_work_sync+0x15/0x15
  [<ffffffff81080d9c>] kthread+0xae/0xb6
  [<ffffffff81080000>] ? param_array_set+0x40/0xfa
  [<ffffffff81080cee>] ? __kthread_parkme+0x61/0x61
  [<ffffffff81508152>] ret_from_fork+0x42/0x70
  [<ffffffff81080cee>] ? __kthread_parkme+0x61/0x61

I suspect it is because there is no lock protecting this
global list, autostart_arrays() is called in ioctl() path
where there is no lock.

Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-09 09:37:23 -07:00
Mike Christie
28a8f0d317 block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH
To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie
796a5cf083 md: use bio op accessors
Separate the op from the rq_flag_bits and have md
set/get the bio using bio_set_op_attrs/bio_op.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Mike Christie
4e49ea4a3d block/fs/drivers: remove rw argument from submit_bio
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.

Signed-off-by: Mike Christie <mchristi@redhat.com>

Fixed up fs/ext4/crypto.c

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Guoqing Jiang
db76767213 md: simplify the code with md_kick_rdev_from_array
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-03 16:23:02 -07:00
Guoqing Jiang
bb8bf15bd6 md-cluster: fix deadlock issue when add disk to an recoverying array
Add a disk to an array which is performing recovery
is a little complicated, we need to do both reap the
sync thread and perform add disk for the case, then
it caused deadlock as follows.

linux44:~ # ps aux|grep md|grep D
root      1822  0.0  0.0      0     0 ?        D    16:50   0:00 [md127_resync]
root      1848  0.0  0.0  19860   952 pts/0    D+   16:50   0:00 mdadm --manage /dev/md127 --re-add /dev/vdb
linux44:~ # cat /proc/1848/stack
[<ffffffff8107afde>] kthread_stop+0x6e/0x120
[<ffffffffa051ddb0>] md_unregister_thread+0x40/0x80 [md_mod]
[<ffffffffa0526e45>] md_reap_sync_thread+0x15/0x150 [md_mod]
[<ffffffffa05271e0>] action_store+0x260/0x270 [md_mod]
[<ffffffffa05206b4>] md_attr_store+0xb4/0x100 [md_mod]
[<ffffffff81214a7e>] sysfs_write_file+0xbe/0x140
[<ffffffff811a6b98>] vfs_write+0xb8/0x1e0
[<ffffffff811a75b8>] SyS_write+0x48/0xa0
[<ffffffff8152a5c9>] system_call_fastpath+0x16/0x1b
[<00007f068ea1ed30>] 0x7f068ea1ed30
linux44:~ # cat /proc/1822/stack
[<ffffffffa05251a6>] md_do_sync+0x846/0xf40 [md_mod]
[<ffffffffa052402d>] md_thread+0x16d/0x180 [md_mod]
[<ffffffff8107ad94>] kthread+0xb4/0xc0
[<ffffffff8152a518>] ret_from_fork+0x58/0x90

                        Task1848                                Task1822
md_attr_store (held reconfig_mutex by call mddev_lock())
                        action_store
			md_reap_sync_thread
			md_unregister_thread
			kthread_stop                    md_wakeup_thread(mddev->thread);
						wait_event(mddev->sb_wait, !test_bit(MD_CHANGE_PENDING))

md_check_recovery is triggered by wakeup mddev->thread,
but it can't clear MD_CHANGE_PENDING flag since it can't
get lock which was held by md_attr_store already.

To solve the deadlock problem, we move "->resync_finish()"
from md_do_sync to md_reap_sync_thread (after md_update_sb),
also MD_HELD_RESYNC_LOCK is introduced since it is possible
that node can't get resync lock in md_do_sync.

Then we do not need to wait for MD_CHANGE_PENDING is cleared
or not since metadata should be updated after md_update_sb,
so just call resync_finish if MD_HELD_RESYNC_LOCK is set.

We also unified the code after skip label, since set PENDING
for non-clustered case should be harmless.

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-06-03 16:22:59 -07:00
Linus Torvalds
feaa7cb5c5 Merge tag 'md/4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull MD updates from Shaohua Li:
 "Several patches from Guoqing fixing md-cluster bugs and several
  patches from Heinz fixing dm-raid bugs"

* tag 'md/4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md-cluster: check the return value of process_recvd_msg
  md-cluster: gather resync infos and enable recv_thread after bitmap is ready
  md: set MD_CHANGE_PENDING in a atomic region
  md: raid5: add prerequisite to run underneath dm-raid
  md: raid10: add prerequisite to run underneath dm-raid
  md: md.c: fix oops in mddev_suspend for raid0
  md-cluster: fix ifnullfree.cocci warnings
  md-cluster/bitmap: unplug bitmap to sync dirty pages to disk
  md-cluster/bitmap: fix wrong page num in bitmap_file_clear_bit and bitmap_file_set_bit
  md-cluster/bitmap: fix wrong calcuation of offset
  md-cluster: sync bitmap when node received RESYNCING msg
  md-cluster: always setup in-memory bitmap
  md-cluster: wakeup thread if activated a spare disk
  md-cluster: change array_sectors and update size are not supported
  md-cluster: fix locking when node joins cluster during message broadcast
  md-cluster: unregister thread if err happened
  md-cluster: wake up thread to continue recovery
  md-cluser: make resync_finish only called after pers->sync_request
  md-cluster: change resync lock from asynchronous to synchronous
2016-05-19 17:25:13 -07:00
Linus Torvalds
24b9f0cf00 Merge branch 'for-4.7/drivers' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
 "On top of the core pull request, this is the drivers pull request for
  this merge window.  This contains:

   - Switch drivers to the new write back cache API, and kill off the
     flush flags.  From me.

   - Kill the discard support for the STEC pci-e flash driver.  It's
     trivially broken, and apparently unmaintained, so it's safer to
     just remove it.  From Jeff Moyer.

   - A set of lightnvm updates from the usual suspects (Matias/Javier,
     and Simon), and fixes from Arnd, Jeff Mahoney, Sagi, and Wenwei
     Tao.

   - A set of updates for NVMe:

        - Turn the controller state management into a proper state
          machine.  From Christoph.

        - Shuffling of code in preparation for NVMe-over-fabrics, also
          from Christoph.

        - Cleanup of the command prep part from Ming Lin.

        - Rewrite of the discard support from Ming Lin.

        - Deadlock fix for namespace removal from Ming Lin.

        - Use the now exported blk-mq tag helper for IO termination.
          From Sagi.

        - Various little fixes from Christoph, Guilherme, Keith, Ming
          Lin, Wang Sheng-Hui.

   - Convert mtip32xx to use the now exported blk-mq tag iter function,
     from Keith"

* 'for-4.7/drivers' of git://git.kernel.dk/linux-block: (74 commits)
  lightnvm: reserved space calculation incorrect
  lightnvm: rename nr_pages to nr_ppas on nvm_rq
  lightnvm: add is_cached entry to struct ppa_addr
  lightnvm: expose gennvm_mark_blk to targets
  lightnvm: remove mgt targets on mgt removal
  lightnvm: pass dma address to hardware rather than pointer
  lightnvm: do not assume sequential lun alloc.
  nvme/lightnvm: Log using the ctrl named device
  lightnvm: rename dma helper functions
  lightnvm: enable metadata to be sent to device
  lightnvm: do not free unused metadata on rrpc
  lightnvm: fix out of bound ppa lun id on bb tbl
  lightnvm: refactor set_bb_tbl for accepting ppa list
  lightnvm: move responsibility for bad blk mgmt to target
  lightnvm: make nvm_set_rqd_ppalist() aware of vblks
  lightnvm: remove struct factory_blks
  lightnvm: refactor device ops->get_bb_tbl()
  lightnvm: introduce nvm_for_each_lun_ppa() macro
  lightnvm: refactor dev->online_target to global nvm_targets
  lightnvm: rename nvm_targets to nvm_tgt_type
  ...
2016-05-17 16:03:32 -07:00
Guoqing Jiang
85ad1d13ee md: set MD_CHANGE_PENDING in a atomic region
Some code waits for a metadata update by:

1. flagging that it is needed (MD_CHANGE_DEVS or MD_CHANGE_CLEAN)
2. setting MD_CHANGE_PENDING and waking the management thread
3. waiting for MD_CHANGE_PENDING to be cleared

If the first two are done without locking, the code in md_update_sb()
which checks if it needs to repeat might test if an update is needed
before step 1, then clear MD_CHANGE_PENDING after step 2, resulting
in the wait returning early.

So make sure all places that set MD_CHANGE_PENDING are atomicial, and
bit_clear_unless (suggested by Neil) is introduced for the purpose.

Cc: Martin Kepplinger <martink@posteo.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: <linux-kernel@vger.kernel.org>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-09 09:24:02 -07:00
Heinz Mauelshagen
092398dce8 md: md.c: fix oops in mddev_suspend for raid0
Introduced by upstream commit 70d9798b95

The raid0 personality does not create mddev->thread as oposed to
other personalities leading to its unconditional access in
mddev_suspend() causing an oops.

Patch checks for mddev->thread in order to keep the
intention of aforementioned commit.

Fixes: 70d9798b95 ("MD: warn for potential deadlock")
Cc: stable@vger.kernel.org (4.5+)
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-09 09:23:23 -07:00
Guoqing Jiang
a578183ed9 md-cluster: wakeup thread if activated a spare disk
When a device is re-added, it will ultimately need
to be activated and that happens in md_check_recovery,
so we need to set MD_RECOVERY_NEEDED right after
remove_and_add_spares.

A specifical issue without the change is that when
one node perform fail/remove/readd on a disk, but
slave nodes could not add the disk back to array as
expected (added as missed instead of in sync). So
give slave nodes a chance to do resync.

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-04 12:39:35 -07:00
Guoqing Jiang
ab5a98b132 md-cluster: change array_sectors and update size are not supported
Currently, some features are not supported yet,
such as change array_sectors and update size, so
return EINVAL for them and listed it in document.

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-04 12:39:35 -07:00
Guoqing Jiang
2c97cf1385 md-cluser: make resync_finish only called after pers->sync_request
It is not reasonable that cluster raid to release resync
lock before the last pers->sync_request has finished.

As the metadata will be changed when node performs resync,
we need to inform other nodes to update metadata, so the
MD_CHANGE_PENDING flag is set before finish resync.

Then metadata_update_finish is move ahead to ensure that
METADATA_UPDATED msg is sent before finish resync, and
metadata_update_start need to be run after "repeat:" label
accordingly.

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-04 12:39:35 -07:00
Guoqing Jiang
41a9a0dcf8 md-cluster: change resync lock from asynchronous to synchronous
If multiple nodes choose to attempt do resync at the same time
they need to be serialized so they don't duplicate effort. This
serialization is done by locking the 'resync' DLM lock.

Currently if a node cannot get the lock immediately it doesn't
request notification when the lock becomes available (i.e.
DLM_LKF_NOQUEUE is set), so it may not reliably find out when it
is safe to try again.

Rather than trying to arrange an async wake-up when the lock
becomes available, switch to using synchronous locking - this is
a lot easier to think about.  As it is not permitted to block in
the 'raid1d' thread, move the locking to the resync thread.  So
the rsync thread is forked immediately, but it blocks until the
resync lock is available. Once the lock is locked it checks again
if any resync action is needed.

A particular symptom of the current problem is that a node can
get stuck with "resync=pending" indefinitely.

Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-05-04 12:39:35 -07:00
Shaohua Li
9c573de328 MD: make bio mergeable
blk_queue_split marks bio unmergeable, which makes sense for normal bio.
But if dispatching the bio to underlayer disk, the blk_queue_split
checks are invalid, hence it's possible the bio becomes mergeable.

In the reported bug, this bug causes trim against raid0 performance slash
https://bugzilla.kernel.org/show_bug.cgi?id=117051

Reported-and-tested-by: Park Ju Hyung <qkrwngud825@gmail.com>
Fixes: 6ac45aeb6bca(block: avoid to merge splitted bio)
Cc: stable@vger.kernel.org (v4.3+)
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Neil Brown <neilb@suse.de>
Reviewed-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-04-25 18:21:33 -07:00
Jens Axboe
56883a7ec8 md: update to using blk_queue_write_cache()
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12 16:00:39 -06:00
Shaohua Li
ed3b98c71c MD: add rdev reference for super write
Xiao Ni reported below crash:
[26396.335146] BUG: unable to handle kernel NULL pointer dereference at 00000000000002a8
[26396.342990] IP: [<ffffffffa0425b00>] super_written+0x20/0x80 [md_mod]
[26396.349449] PGD 0
[26396.351468] Oops: 0002 [#1] SMP
[26396.354898] Modules linked in: ext4 mbcache jbd2 raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_td
[26396.408404] CPU: 5 PID: 3261 Comm: loop0 Not tainted 4.5.0 #1
[26396.414140] Hardware name: Dell Inc. PowerEdge R715/0G2DP3, BIOS 3.2.2 09/15/2014
[26396.421608] task: ffff8808339be680 ti: ffff8808365f4000 task.ti: ffff8808365f4000
[26396.429074] RIP: 0010:[<ffffffffa0425b00>]  [<ffffffffa0425b00>] super_written+0x20/0x80 [md_mod]
[26396.437952] RSP: 0018:ffff8808365f7c38  EFLAGS: 00010046
[26396.443252] RAX: ffffffffa0425ae0 RBX: ffff8804336a7900 RCX: ffffe8f9f7b41198
[26396.450371] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8804336a7900
[26396.457489] RBP: ffff8808365f7c50 R08: 0000000000000005 R09: 00001801e02ce3d7
[26396.464608] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[26396.471728] R13: ffff8808338d9a00 R14: 0000000000000000 R15: ffff880833f9fe00
[26396.478849] FS:  00007f9e5066d740(0000) GS:ffff880237b40000(0000) knlGS:0000000000000000
[26396.486922] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[26396.492656] CR2: 00000000000002a8 CR3: 00000000019ea000 CR4: 00000000000006e0
[26396.499775] Stack:
[26396.501781]  ffff8804336a7900 0000000000000000 0000000000000000 ffff8808365f7c68
[26396.509199]  ffffffff81308cd0 ffff8804336a7900 ffff8808365f7ca8 ffffffff81310637
[26396.516618]  00000000a0233a00 ffff880833f9fe00 0000000000000000 ffff880833fb0000
[26396.524038] Call Trace:
[26396.526485]  [<ffffffff81308cd0>] bio_endio+0x40/0x60
[26396.531529]  [<ffffffff81310637>] blk_update_request+0x87/0x320
[26396.537439]  [<ffffffff8131a20a>] blk_mq_end_request+0x1a/0x70
[26396.543261]  [<ffffffff81313889>] blk_flush_complete_seq+0xd9/0x2a0
[26396.549517]  [<ffffffff81313ccf>] flush_end_io+0x15f/0x240
[26396.554993]  [<ffffffff8131a22a>] blk_mq_end_request+0x3a/0x70
[26396.560815]  [<ffffffff8131a314>] __blk_mq_complete_request+0xb4/0xe0
[26396.567246]  [<ffffffff8131a35c>] blk_mq_complete_request+0x1c/0x20
[26396.573506]  [<ffffffffa04182df>] loop_queue_work+0x6f/0x72c [loop]
[26396.579764]  [<ffffffff81697844>] ? __schedule+0x2b4/0x8f0
[26396.585242]  [<ffffffff810a7812>] kthread_worker_fn+0x52/0x170
[26396.591065]  [<ffffffff810a77c0>] ? kthread_create_on_node+0x1a0/0x1a0
[26396.597582]  [<ffffffff810a7238>] kthread+0xd8/0xf0
[26396.602453]  [<ffffffff810a7160>] ? kthread_park+0x60/0x60
[26396.607929]  [<ffffffff8169bdcf>] ret_from_fork+0x3f/0x70
[26396.613319]  [<ffffffff810a7160>] ? kthread_park+0x60/0x60

md_super_write() and corresponding md_super_wait() generally are called
with reconfig_mutex locked, which prevents disk disappears. There is one
case this rule is broken. write_sb_page of bitmap.c doesn't hold the
mutex. next_active_rdev does increase rdev reference, but it decreases
the reference too early (eg, before IO finish). disk can disappear at
the window. We unconditionally increase rdev reference in
md_super_write() to avoid the race.

Reported-and-tested-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-03-31 10:04:18 -07:00
Wei Fang
466ad29223 md: fix a trivial typo in comments
Fix a trivial typo in md_ioctl().

Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-03-31 10:04:18 -07:00
Shaohua Li
70d9798b95 MD: warn for potential deadlock
The personality thread shouldn't call mddev_suspend(). Because
mddev_suspend() will for all IO finish, but IO is handled in personality
thread, so this could cause deadlock. To trigger this early, add a
warning if mddev_suspend() is called from personality thread.

Suggested-by: NeilBrown <neilb@suse.com>
Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-02-26 09:44:57 -08:00
Sebastian Parschauer
399146b80e md: Drop sending a change uevent when stopping
When stopping an MD device, then its device node /dev/mdX may still
exist afterwards or it is recreated by udev. The next open() call
can lead to creation of an inoperable MD device. The reason for
this is that a change event (KOBJ_CHANGE) is sent to udev which
races against the remove event (KOBJ_REMOVE) from md_free().
So drop sending the change event.

A change is likely also required in mdadm as many versions send the
change event to udev as well.

Neil mentioned the change event is a workaround for old kernel
Commit: 934d9c23b4 ("md: destroy partitions and notify udev when md array is stopped.")
new mdadm can handle device remove now, so this isn't required any more.

Cc: NeilBrown <neilb@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Sebastian Parschauer <sebastian.riemer@profitbricks.com>
Signed-off-by: Shaohua Li <shli@fb.com>
2016-02-26 09:44:56 -08:00
Linus Torvalds
3c28c9ccaf md updates for 4.5
Mostly clustered-raid1 and raid5 journal updates.
 one Y2038 fix and other minor stuff.
 
 One patch removes me from the MAINTAINERS file and adds a record of
 my md maintainership to Credits.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWmJEhAAoJEDnsnt1WYoG5raQQAI9lBrHO+Q8C8RImPsemLX0X
 ypjH38XUwEwKNYYfsCVI7PKAqCl7r8ITzY054gKsU0iHAfqLQlEN8aMz0v0fJQhg
 Msb7utrEMQ0UERwNcc+3J78ffFAdWrkHVd64Ley0h/pizFPSlL0K2RuIGTBc9sGX
 Hz2Ci11Ch7FdK7C/Zl7I6tK1pkthu3hBXYEZyg1GngRRhZEJj2U7mBmy1E37NA72
 o66B5r5FSlnIA8MAo/EAViCxtMJKBPRWU/WnkMhOJ1Yyw/FwMpbM2prLBLtYFqwF
 OLZOLuDUHY5HxdX2U+3R0hBzF78aozcH6od60SWg7wOmI/IkXYiYFujlxMd132FE
 OT+aa+UHHDEkATTSyt98OmxIkQ8uqKiNsSYqBk9lpNAPtmEbhqRX4RAOdrqP0G83
 DX7iyZpAK4YhB4BkJxMtNdSIOnss1TwfOdKyvoBZYmY6bTKh7p+dpw4cvIjV4VDi
 p6+BUQdJQ7mHRLV9QI4IuG52AJO8cRGc1OVvqLEMzO8uZlpyxX9nJrSqeP/dKKfa
 pJ5pYssilXEeKCDnODGqSRdt9aU4ENDW/oIkAW2U3cnSHUwBoMLF1WJ+M3Atbm+s
 i3/iDp26SnSiHM+DVHije5v0OGOroYdJwKDIFWToElcfc9Q5IDHU+KP8oeuPqqOS
 WA08l+zj+ahfP7Yu1DUC
 =gl+r
 -----END PGP SIGNATURE-----

Merge tag 'md/4.5' of git://neil.brown.name/md

Pull md updates from Neil Brown:
 "Mostly clustered-raid1 and raid5 journal updates.  one Y2038 fix and
  other minor stuff.

  One patch removes me from the MAINTAINERS file and adds a record of my
  md maintainership to Credits"

Many thanks to Neil, who has been around for a _looong_ time.

* tag 'md/4.5' of git://neil.brown.name/md: (26 commits)
  md/raid: only permit hot-add of compatible integrity profiles
  Remove myself as MD Maintainer, and add to Credits.
  raid5-cache: handle journal hotadd in quiesce
  MD: add journal with array suspended
  md: set MD_HAS_JOURNAL in correct places
  md: Remove 'ready' field from mddev.
  md: remove unnecesary md_new_event_inintr
  raid5: allow r5l_io_unit allocations to fail
  raid5-cache: use a mempool for the metadata block
  raid5-cache: use a bio_set
  raid5-cache: add journal hot add/remove support
  drivers: md: use ktime_get_real_seconds()
  md: avoid warning for 32-bit sector_t
  raid5-cache: free meta_page earlier
  raid5-cache: simplify r5l_move_io_unit_list
  md: update comment for md_allow_write
  md-cluster: update comments for MD_CLUSTER_SEND_LOCKED_ALREADY
  md-cluster: Protect communication with mutexes
  md-cluster: Defer MD reloading to mddev->thread
  md-cluster: update the documentation
  ...
2016-01-15 12:28:00 -08:00
Linus Torvalds
d080827f85 libnvdimm for 4.5
1/ Media error handling: The 'badblocks' implementation that originated
    in md-raid is up-levelled to a generic capability of a block device.
    This initial implementation is limited to being consulted in the pmem
    block-i/o path.  Later, 'badblocks' will be consulted when creating
    dax mappings.
 
 2/ Raw block device dax: For virtualization and other cases that want
    large contiguous mappings of persistent memory, add the capability to
    dax-mmap a block device directly.
 
 3/ Increased /dev/mem restrictions: Add an option to treat all io-memory
    as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access while a driver is
    actively using an address range.  This behavior is controlled via the
    new CONFIG_IO_STRICT_DEVMEM option and can be overridden by the
    existing "iomem=relaxed" kernel command line option.
 
 4/ Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
    block device shutdown crash fix, and other small libnvdimm fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWlrhjAAoJEB7SkWpmfYgCFbAQALKsQfFwT6JFS+zlPgiNpbqw
 2VMNKEH0AfGYGj96mT02j2q+vSUmXLMIDMTsbe0sDdtwFZtQbFmhmryzPWUVppSu
 KGTlLPW8vuEhQVs91+UI3BQKkvpi0+tbR8hPOh9W6QhjpRT+lyHFKnsNR5HZy5wB
 K4/VMaT5ffd5/pXRTjkYiPQYTwWyfcvNjICj0YtqhPvOwS031m77JpFsWJ8HSpEX
 K99VlzNUPMXd1pYkHmFNXWw52fhRGNhwAEomLeKMdQfKms+KnbKp8BOSA0aCqU8E
 kpujQcilDXJwykFQZOFI3Z5Dxvrv8lxFTU8HRMBvo3ESzfTWjfqcvyjGOjDUcruw
 ihESFSJtdZzhrBiMnf9RRqSpMFJvAT8MVT6Q4D3mZUHCMPbUqFJsQjMPt9hEH3ho
 4F0D2lesOCkubUKFTZmjMoDb+szuKbVhYK8TeFVVEhizinc/Aj0NKuazJqi+CXB/
 xh0ER4ZxD8wvzqFFWvS5UvR1G9I5fr7+3jGRUrqGLHlSdeXP9dkEg28ao3QbWk3x
 1dPOen6ZqQ9WJ/E7eGmXbVEz2R4Xd79hMXQzdQwmKDk/KbxRoAp7hyU8BslAyrBf
 HCdmVt+RAgrxZYfFRXuLhqwEBThJnNrgZA3qu74FUpkpFg6xRUu1bAYBiF7N+bFi
 82b5UbMkveBTtkXjJoiR
 =7V5r
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "The bulk of this has appeared in -next and independently received a
  build success notification from the kbuild robot.  The 'for-4.5/block-
  dax' topic branch was rebased over the weekend to drop the "block
  device end-of-life" rework that Al would like to see re-implemented
  with a notifier, and to address bug reports against the badblocks
  integration.

  There is pending feedback against "libnvdimm: Add a poison list and
  export badblocks" received last week.  Linda identified some localized
  fixups that we will handle incrementally.

  Summary:

   - Media error handling: The 'badblocks' implementation that
     originated in md-raid is up-levelled to a generic capability of a
     block device.  This initial implementation is limited to being
     consulted in the pmem block-i/o path.  Later, 'badblocks' will be
     consulted when creating dax mappings.

   - Raw block device dax: For virtualization and other cases that want
     large contiguous mappings of persistent memory, add the capability
     to dax-mmap a block device directly.

   - Increased /dev/mem restrictions: Add an option to treat all
     io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access
     while a driver is actively using an address range.  This behavior
     is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be
     overridden by the existing "iomem=relaxed" kernel command line
     option.

   - Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
     block device shutdown crash fix, and other small libnvdimm fixes"

* tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits)
  block: kill disk_{check|set|clear|alloc}_badblocks
  libnvdimm, pmem: nvdimm_read_bytes() badblocks support
  pmem, dax: disable dax in the presence of bad blocks
  pmem: fail io-requests to known bad blocks
  libnvdimm: convert to statically allocated badblocks
  libnvdimm: don't fail init for full badblocks list
  block, badblocks: introduce devm_init_badblocks
  block: clarify badblocks lifetime
  badblocks: rename badblocks_free to badblocks_exit
  libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h
  libnvdimm: Add a poison list and export badblocks
  nfit_test: Enable DSMs for all test NFITs
  md: convert to use the generic badblocks code
  block: Add badblock management for gendisks
  badblocks: Add core badblock management code
  block: fix del_gendisk() vs blkdev_ioctl crash
  block: enable dax for raw block devices
  block: introduce bdev_file_inode()
  restrict /dev/mem to idle io memory ranges
  arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug
  ...
2016-01-13 19:15:14 -08:00
Dan Williams
1501efadc5 md/raid: only permit hot-add of compatible integrity profiles
It is not safe for an integrity profile to be changed while i/o is
in-flight in the queue.  Prevent adding new disks or otherwise online
spares to an array if the device has an incompatible integrity profile.

The original change to the blk_integrity_unregister implementation in
md, commmit c7bfced9a6 "md: suspend i/o during runtime
blk_integrity_unregister" introduced an immediate hang regression.

This policy of disallowing changes the integrity profile once one has
been established is shared with DM.

Here is an abbreviated log from a test run that:
1/ Creates a degraded raid1 with an integrity-enabled device (pmem0s) [   59.076127]
2/ Tries to add an integrity-disabled device (pmem1m) [   90.489209]
3/ Retries with an integrity-enabled device (pmem1s) [  205.671277]

[   59.076127] md/raid1:md0: active with 1 out of 2 mirrors
[   59.078302] md: data integrity enabled on md0
[..]
[   90.489209] md0: incompatible integrity profile for pmem1m
[..]
[  205.671277] md: super_written gets error=-5
[  205.677386] md/raid1:md0: Disk failure on pmem1m, disabling device.
[  205.677386] md/raid1:md0: Operation continuing on 1 devices.
[  205.683037] RAID1 conf printout:
[  205.684699]  --- wd:1 rd:2
[  205.685972]  disk 0, wo:0, o:1, dev:pmem0s
[  205.687562]  disk 1, wo:1, o:1, dev:pmem1s
[  205.691717] md: recovery of RAID array md0

Fixes: c7bfced9a6 ("md: suspend i/o during runtime blk_integrity_unregister")
Cc: <stable@vger.kernel.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Reported-by: NeilBrown <neilb@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-14 11:49:57 +11:00
Shaohua Li
87d4d91616 MD: add journal with array suspended
Hot add journal disk in recovery thread context brings a lot of trouble
as IO could be running. Unlike spare disk hot add, adding journal disk
with array suspended makes more sense and implmentation is much easier.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-14 11:49:43 +11:00
Shaohua Li
a62ab49eb5 md: set MD_HAS_JOURNAL in correct places
Set MD_HAS_JOURNAL when a array is loaded or journal is initialized.
This is to avoid the flags set too early in journal disk hotadd.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-14 11:49:43 +11:00
Dan Williams
d3b407fb3f badblocks: rename badblocks_free to badblocks_exit
For symmetry with badblocks_init() make it clear that this path only
destroys incremental allocations of a badblocks instance, and does not
free the badblocks instance itself.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-01-09 08:39:04 -08:00
Vishal Verma
fc974ee2bf md: convert to use the generic badblocks code
Retain badblocks as part of rdev, but use the accessor functions from
include/linux/badblocks for all manipulation.

Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-01-09 08:39:03 -08:00
NeilBrown
274d8cbde1 md: Remove 'ready' field from mddev.
This field is always set in tandem with ->pers, and when it is tested
->pers is also tested.  So ->ready is not needed.

It was needed once, but code rearrangement and locking changes have
removed that needed.

Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-07 11:01:14 +11:00
Guoqing Jiang
bb9ef71646 md: remove unnecesary md_new_event_inintr
md_new_event had removed sysfs_notify since 'commit 72a23c211e
("Make sure all changes to md/sync_action are notified.")', so we
can use md_new_event and delete md_new_event_inintr.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-07 11:01:14 +11:00
Shaohua Li
f6b6ec5cfa raid5-cache: add journal hot add/remove support
Add support for journal disk hot add/remove. Mostly trival checks in md
part. The raid5 part is a little tricky. For hot-remove, we can't wait
pending write as it's called from raid5d. The wait will cause deadlock.
We simplily fail the hot-remove. A hot-remove retry can success
eventually since if journal disk is faulty all pending write will be
failed and finish. For hot-add, since an array supporting journal but
without journal disk will be marked read-only, we are safe to hot add
journal without stopping IO (should be read IO, while journal only
handles write IO).

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06 11:39:57 +11:00
Deepa Dinamani
9ebc6ef188 drivers: md: use ktime_get_real_seconds()
get_seconds() API is not y2038 safe on 32 bit systems and the API
is deprecated. Replace it with calls to ktime_get_real_seconds()
API instead. Change mddev structure types to time64_t accordingly.

32 bit signed timestamps will overflow in the year 2038.

Change the user interface mdu_array_info_s structure timestamps:
ctime and utime values used in ioctls GET_ARRAY_INFO and
SET_ARRAY_INFO to unsigned int. This will extend the field to last
until the year 2106.
The long term plan is to get rid of ctime and utime values in
this structure as this information can be read from the on-disk
meta data directly.

Clamp the tim64_t timestamps to positive values with a max of U32_MAX
when returning from GET_ARRAY_INFO ioctl to accommodate above changes
in the data type of timestamps to unsigned int.

v0.90 on disk meta data uses u32 for maintaining time stamps.
So this will also last until year 2106.
Assumption is that the usage of v0.90 will be deprecated by
year 2106.

Timestamp fields in the on disk meta data for v1.0 version already
use 64 bit data types. Remove the truncation of the bits while
writing to or reading from these from the disk.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06 11:39:53 +11:00
Arnd Bergmann
3312c951ef md: avoid warning for 32-bit sector_t
When CONFIG_LBDAF is not set, sector_t is only 32-bits wide, which
means we cannot have devices with more than 2TB, and the code that
is trying to handle compatibility support for large devices in
md version 0.90 is meaningless but also causes a compile-time warning:

drivers/md/md.c: In function 'super_90_load':
drivers/md/md.c:1029:19: warning: large integer implicitly truncated to unsigned type [-Woverflow]
drivers/md/md.c: In function 'super_90_rdev_size_change':
drivers/md/md.c:1323:17: warning: large integer implicitly truncated to unsigned type [-Woverflow]

This adds a check for CONFIG_LBDAF to avoid even getting into this
code path, and also adds an explicit cast to let the compiler know
it doesn't have to warn about the truncation.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06 11:39:48 +11:00
Guoqing Jiang
abf3508d8f md: update comment for md_allow_write
MD_CHANGE_CLEAN had been replaced with MD_CHANGE_PENDING after
commit 070dc6 ("md: resolve confusion of MD_CHANGE_CLEAN"),
so make the change accordingly.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06 11:39:26 +11:00
Guoqing Jiang
15858fa5b0 md-cluster: Defer MD reloading to mddev->thread
Reloading of superblock must be performed under reconfig_mutex. However,
this cannot be done with md_reload_sb because it would deadlock with
the message DLM lock. So, we defer it in md_check_recovery() which is
executed by mddev->thread.

This introduces a new flag, MD_RELOAD_SB, which if set, will reload the
superblock. And good_device_nr is also added to 'struct mddev' which is
used to get the num of the good device within cluster raid.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06 11:39:10 +11:00
Guoqing Jiang
f6a2dc64ee md-cluster: append some actions when change bitmap from clustered to none
For clustered raid, we need to do extra actions when change
bitmap to none.

1. check if all the bitmap lock could be get or not, if yes then
   we can continue the change since cluster raid is only active
   in current node. Otherwise return fail and unlock the related
   bitmap locks
2. set nodes to 0 and then leave cluster environment.
3. release other nodes's bitmap lock.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06 11:38:57 +11:00
Goldwyn Rodrigues
09afd2a8d6 md-cluster: Allow spare devices to be marked as faulty
If a spare device was marked faulty, it would not be reflected
in receiving nodes because it would mark it as activated and continue.
Continue the operation, so it may be set as faulty.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06 11:38:51 +11:00
Goldwyn Rodrigues
54a88392cd md-cluster: Fix the remove sequence with the new MD reload code
The remove disk message does not need metadata_update_start(), but
can be an independent message.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06 11:38:42 +11:00
Guoqing Jiang
659b254fa7 md-cluster: remove a disk asynchronously from cluster environment
For cluster raid, if one disk couldn't be reach in one node, then
other nodes would receive the REMOVE message for the disk.

In receiving node, we can't call md_kick_rdev_from_array to remove
the disk from array synchronously since the disk might still be busy
in this node. So let's set a ClusterRemove flag on the disk, then
let the thread to do the removal job eventually.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2016-01-06 11:38:36 +11:00
NeilBrown
312045eef9 md: remove check for MD_RECOVERY_NEEDED in action_store.
md currently doesn't allow a 'sync_action' such as 'reshape' to be set
while MD_RECOVERY_NEEDED is set.

This s a problem, particularly since commit 738a273806 as that can
cause ->check_shape to call mddev_resume() which sets
MD_RECOVERY_NEEDED.  So by the time we come to start 'reshape' it is
very likely that MD_RECOVERY_NEEDED is still set.

Testing for this flag is not really needed and is in any case very
racy as it can be set at any moment - asynchronously.  Any race
between setting a sync_action and setting MD_RECOVERY_NEEDED must
already be handled properly in some locked code, probably
md_check_recovery(), so remove the test here.

The test on MD_RECOVERY_RUNNING is also racy in the 'reshape' case
so we should test it again after getting mddev_lock().

As this fixes a race and a regression which can cause 'reshape' to
fail, it is suitable for -stable kernels since 4.1

Reported-by: Xiao Ni <xni@redhat.com>
Fixes: 738a273806 ("md/raid5: fix allocation of 'scribble' array.")
Cc: stable@vger.kernel.org (v4.1+)
Signed-off-by: NeilBrown <neilb@suse.com>
2015-12-21 11:10:06 +11:00
Goldwyn Rodrigues
cb01c5496d Fix remove_and_add_spares removes drive added as spare in slot_store
Commit 2910ff17d1
introduced a regression which would remove a recently added spare via
slot_store. Revert part of the patch which touches slot_store() and add
the disk directly using pers->hot_add_disk()

Fixes: 2910ff17d1 ("md: remove_and_add_spares() to activate specific
rdev")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-12-18 15:19:16 +11:00
Mikulas Patocka
0dc10e50f2 md: fix bug due to nested suspend
The patch c7bfced9a6 committed to 4.4-rc
causes crash in LVM test shell/lvchange-raid.sh. The kernel crashes with
this BUG, the reason is that we attempt to suspend a device that is
already suspended. See also
https://bugzilla.redhat.com/show_bug.cgi?id=1283491

This patch fixes the bug by changing functions mddev_suspend and
mddev_resume to always nest.
The number of nested calls to mddev_nested_suspend is kept in the
variable mddev->suspended.
[neilb: made mddev_suspend() always nest instead of introduce mddev_nested_suspend]

kernel BUG at drivers/md/md.c:317!
CPU: 3 PID: 32754 Comm: lvm Not tainted 4.4.0-rc2 #1
task: 0000000047076040 ti: 0000000047014000 task.ti: 0000000047014000

     YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001000000000000001111 Not tainted
r00-03  000000000804000f 00000000102c5280 0000000010c7522c 000000007e3d1810
r04-07  0000000010c6f000 000000004ef37f20 000000007e3d1dd0 000000007e3d1810
r08-11  000000007c9f1600 0000000000000000 0000000000000001 ffffffffffffffff
r12-15  0000000010c1d000 0000000000000041 00000000f98d63c8 00000000f98e49e4
r16-19  00000000f98e49e4 00000000c138fd06 00000000f98d63c8 0000000000000001
r20-23  0000000000000002 000000004ef37f00 00000000000000b0 00000000000001d1
r24-27  00000000424783a0 000000007e3d1dd0 000000007e3d1810 00000000102b2000
r28-31  0000000000000001 0000000047014840 0000000047014930 0000000000000001
sr00-03  0000000007040800 0000000000000000 0000000000000000 0000000007040800
sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000

IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000102c538c 00000000102c5390
 IIR: 03ffe01f    ISR: 0000000000000000  IOR: 00000000102b2748
 CPU:        3   CR30: 0000000047014000 CR31: 0000000000000000
 ORIG_R28: 00000000000000b0
 IAOQ[0]: mddev_suspend+0x10c/0x160 [md_mod]
 IAOQ[1]: mddev_suspend+0x110/0x160 [md_mod]
 RP(r2): raid1_add_disk+0xd4/0x2c0 [raid1]
Backtrace:
 [<0000000010c7522c>] raid1_add_disk+0xd4/0x2c0 [raid1]
 [<0000000010c20078>] raid_resume+0x390/0x418 [dm_raid]
 [<00000000105833e8>] dm_table_resume_targets+0xc0/0x188 [dm_mod]
 [<000000001057f784>] dm_resume+0x144/0x1e0 [dm_mod]
 [<0000000010587dd4>] dev_suspend+0x1e4/0x568 [dm_mod]
 [<0000000010589278>] ctl_ioctl+0x1e8/0x428 [dm_mod]
 [<0000000010589518>] dm_compat_ctl_ioctl+0x18/0x68 [dm_mod]
 [<0000000040377b88>] compat_SyS_ioctl+0xd0/0x1558

Fixes: c7bfced9a6 ("md: suspend i/o during runtime blk_integrity_unregister")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.com>
2015-12-18 15:19:16 +11:00