Commit Graph

73 Commits

Author SHA1 Message Date
Tracey Dent
bca364d30d drivers/dma/ioat: Use the ccflag-y instead of EXTRA_CFLAGS
Changed Makefile to use <modules>-y instead of <modules>-objs. Following
(documentation/kbuild/makefiles.txt).

Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-12-04 15:03:06 -08:00
Dan Williams
c50a898fd4 ioat2: fix performance regression
Commit 0793448 "DMAENGINE: generic channel status v2" changed the interface for
how dma channel progress is retrieved.  It inadvertently exported an internal
helper function ioat_tx_status() instead of ioat_dma_tx_status().  The latter
polls the hardware to get the latest completion state, while the helper just
evaluates the current state without touching hardware.  The effect is that we
end up waiting for completion timeouts or descriptor allocation errors before
the completion state is updated.

iperf (before fix):
[SUM]  0.0-41.3 sec   364 MBytes  73.9 Mbits/sec

iperf (after fix):
[SUM]  0.0- 4.5 sec   499 MBytes   940 Mbits/sec

This is a regression starting with 2.6.35.

Cc: <stable@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Reported-by: Richard Scobie <richard@sauce.co.nz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-13 15:43:10 -07:00
Dan Williams
556ab45f9a ioat2: catch and recover from broken vtd configurations v6
On some platforms (MacPro3,1) the BIOS assigns the ioatdma device to the
incorrect iommu causing faults when the driver initializes.  Add a quirk
to catch this misconfiguration and try falling back to untranslated
operation (which works in the MacPro3,1 case).

Assuming there are other platforms with misconfigured iommus teach the
ioatdma driver to treat initialization failures as non-fatal (just fail
the driver load and emit a warning instead of triggering a BUG_ON).

This can be classified as a boot regression since 2.6.32 on affected
platforms since the ioatdma module did not autoload prior to that
kernel.

Cc: <stable@kernel.org>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Reported-by: Chris Li <lkml@chrisli.org>
Tested-by: Chris Li <lkml@chrisli.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-04 14:18:17 -07:00
Dan Williams
0b28330e39 Merge branch 'ioat' into dmaengine 2010-05-17 16:30:58 -07:00
Minskey Guo
c86e1401c9 ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device
The memory for ioatdma_device structure is being allocated in
alloc_ioatdma()

Signed-off-by: Minskey Guo <chaohong_guo@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-02 12:52:35 -07:00
Dan Williams
2adfc550b6 ioat3: disable cacheline-unaligned transfers for raid operations
There are cases where cacheline-unaligned raid operations can hang the
dma channel.  Simply disable these operations by increasing the
alignment constraints published to async_tx.  The raid456 driver always
issues page aligned requests, so the only in-kernel user of the ioatdma
driver that is affected by this change is dmatest.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-01 15:22:56 -07:00
Dan Williams
074cc47679 ioat2,3: convert to producer/consumer locking
Use separate locks for the descriptor prep (producer) and descriptor
cleanup (consumer) paths.  Allows the producer path to run concurrently
with the cleanup path.  Inspired by Documentation/circular-buffer.txt.

Cc: David Howells <dhowells@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-01 15:22:55 -07:00
Dan Williams
abb12dfd50 ioat: convert to circ_buf
Use the common power-of-2 circular buffer macros.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-01 15:22:54 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Dan Williams
bca3469205 dmaengine: provide helper for setting txstate
Simple conditional struct filler to cut out some duplicated code.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-26 16:52:10 -07:00
Linus Walleij
0793448187 DMAENGINE: generic channel status v2
Convert the device_is_tx_complete() operation on the
DMA engine to a generic device_tx_status()operation which
can return three states, DMA_TX_RUNNING, DMA_TX_COMPLETE,
DMA_TX_PAUSED.

[dan.j.williams@intel.com: update for timberdale]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Li Yang <leoli@freescale.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Magnus Damm <damm@opensource.se>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Joe Perches <joe@perches.com>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-26 16:50:49 -07:00
Emese Revfy
52cf25d0ab Driver core: Constify struct sysfs_ops in struct kobj_type
Constify struct sysfs_ops.

This is part of the ops structure constification
effort started by Arjan van de Ven et al.

Benefits of this constification:

 * prevents modification of data that is shared
   (referenced) by many other structure instances
   at runtime

 * detects/prevents accidental (but not intentional)
   modification attempts on archs that enforce
   read-only kernel data at runtime

 * potentially better optimized code as the compiler
   can assume that the const data cannot be changed

 * the compiler/linker move const data into .rodata
   and therefore exclude them from false sharing

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: David Teigland <teigland@redhat.com>
Acked-by: Matt Domsch <Matt_Domsch@dell.com>
Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:49 -08:00
Akinobu Mita
984b3f5746 bitops: rename for_each_bit() to for_each_set_bit()
Rename for_each_bit to for_each_set_bit in the kernel source tree.  To
permit for_each_clear_bit(), should that ever be added.

The patch includes a macro to map the old for_each_bit() onto the new
for_each_set_bit().  This is a (very) temporary thing to ease the migration.

[akpm@linux-foundation.org: add temporary for_each_bit()]
Suggested-by: Alexey Dobriyan <adobriyan@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06 11:26:23 -08:00
Dan Williams
dd58ffcf5a Merge branch 'coh' into dmaengine 2010-03-03 21:22:21 -07:00
Dan Williams
aa4d72ae94 ioat: cleanup ->timer_fn() and ->cleanup_fn() prototypes
If the calling convention of ->timer_fn() and ->cleanup_fn() are unified
across hardware versions we can drop parameters to ioat_init_channel() and
unify ioat_is_dma_complete() implementations.

Both ->timer_fn() and ->cleanup_fn() are modified to expect a struct
dma_chan pointer.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-03 21:21:13 -07:00
Dan Williams
b9cc98697d ioat3: interrupt coalescing
The hardware automatically disables further interrupts after each event
until rearmed.  This allows a delay to be injected between the occurence
of the interrupt and the running of the cleanup routine.  The delay is
scaled by the descriptor backlog and then written to the INTRDELAY
register which specifies the number of microseconds to hold off
interrupt delivery after an interrupt event occurs.  According to
powertop this reduces the interrupt rate from ~5000 intr/s to ~150
intr/s per without affecting throughput (simple dd to a raid6 array).

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-03 21:21:13 -07:00
Dan Williams
aa75db0080 ioat: close potential BUG_ON race in the descriptor cleanup path
Since ioat_cleanup_preamble() and the update of the last completed
descriptor are not synchronized there is a chance that two cleanup threads
can see descriptors to clean.  If the first cleans up all pending
descriptors then the second will trigger the BUG_ON.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-03 21:21:10 -07:00
Dan Williams
281befa559 ioat2: kill pending flag
The pending == 2 case no longer exists in the driver so, we can use
ioat2_ring_pending() outside the lock to determine if there might be any
descriptors in the ring that the hardware has not seen.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-03 11:47:43 -07:00
Dan Williams
b372ec2d90 ioat3: use ioat2_quiesce()
Replace open coded ioat2_quiesce() call in ioat3_restart_channel

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-03 11:47:42 -07:00
Dan Williams
773d9e2d8d ioat3: cleanup, don't enable DCA completion writes
We already disallow raid operations while DCA is globally enabled, so
having it locally enabled is a nop and confusing when reading the code.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-03 11:47:42 -07:00
Dan Williams
7e55a70c5b ioat: fix infinite timeout checking in ioat2_quiesce
Fix typo in ioat2_quiesce. check 'tmo' is zero, not 'end'.  Also applies
to 2.6.32.3

Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-02 22:57:34 -07:00
Dan Williams
a6d52d7067 ioat2,3: put channel hardware in known state at init
Put the ioat2 and ioat3 state machines in the halted state with all
errors cleared.

The ioat1 init path is not disturbed for stability, there are no
reported ioat1 initiaization issues.

Cc: <stable@kernel.org>
Reported-by: Roland Dreier <rdreier@cisco.com>
Tested-by: Roland Dreier <rdreier@cisco.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-19 15:36:02 -07:00
Dan Williams
cd78809f61 ioat3: fix p-disabled q-continuation
When continuing a pq calculation the driver needs 3 extra sources.  The
driver can perform a 3 source calculation with a single descriptor, but
needs an extended descriptor to process up to 8 sources in one
operation.  However, in the p-disabled case only one extra source is
needed.  When continuing a p-disabled operation there are occasions
(i.e. 0 < src_cnt % 8 < 3) where the tail operation does not need an
extended descriptor.  Properly account for this fact otherwise invalid
'dmacount' values will be written to hardware usually causing the
channel to halt with 'invalid descriptor' errors.

Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-12-17 13:52:39 -07:00
Dan Williams
49954c1567 ioat3: fix pq completion versus channel deallocation race
The completion of a pq operation is notified with a null descriptor
appended to the end of the chain.  This descriptor needs to be visible
to dma clients otherwise the client is precluded from ensuring all
operations are quiesced before freeing channel resources, i.e. due to
descriptor polling it may get the completion notification ahead of the
interrupt delivered by the null descriptor.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 23:21:03 -07:00
Dan Williams
7b3cc2b1fc async_tx: build-time toggling of async_{syndrome,xor}_val dma support
ioat3.2 does not support asynchronous error notifications which makes
the driver experience latencies when non-zero pq validate results are
expected.  Provide a mechanism for turning off async_xor_val and
async_syndrome_val via Kconfig.  This approach is generally useful for
any driver that specifies ASYNC_TX_DISABLE_CHANNEL_SWITCH and would like
to force the async_tx api to fall back to the synchronous path for
certain operations.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 23:21:03 -07:00
Dan Williams
b57014def9 ioat2,3: report all uncorrectable errors
Modify is_ioat_bug() to catch all errors that are uncorrectable, or not
currently handled.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 23:21:03 -07:00
Dan Williams
de581b65f6 ioat3: specify valid address for disabled-Q or disabled-P
Although disabled, hardware still checks address validity, so duplicate
the known address.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 17:08:45 -07:00
Dan Williams
6f82b83b7a ioat2,3: disable asynchronous error notifications
Error interrupts and error completions may cause channel hangs, so
poll the channel status register after a timeout.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 17:07:57 -07:00
Dan Williams
228c4f5cfb ioat3: dca and raid operations are incompatible
RAID operations cause a system hang on platforms with DCA
(Direct-Cache-Access) enabled.  So turn off RAID capabilities in this
case.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 17:07:10 -07:00
Dan Williams
e22dde9904 ioat: silence "dca disabled" messages
Turning off dca is not an "error", and the dca-enabled state can be
viewed from sysfs.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-17 11:34:31 -07:00
Dan Williams
cdef57dbb6 ioat3: fix uninitialized var warnings
drivers/dma/ioat/dma_v3.c: In function 'ioat3_prep_memset_lock':
drivers/dma/ioat/dma_v3.c:439: warning: 'fill' may be used uninitialized in this function
drivers/dma/ioat/dma_v3.c:437: warning: 'desc' may be used uninitialized in this function
drivers/dma/ioat/dma_v3.c: In function '__ioat3_prep_xor_lock':
drivers/dma/ioat/dma_v3.c:489: warning: 'xor' may be used uninitialized in this function
drivers/dma/ioat/dma_v3.c:486: warning: 'desc' may be used uninitialized in this function
drivers/dma/ioat/dma_v3.c: In function '__ioat3_prep_pq_lock':
drivers/dma/ioat/dma_v3.c:631: warning: 'pq' may be used uninitialized in this function
drivers/dma/ioat/dma_v3.c:628: warning: 'desc' may be used uninitialized in this function

gcc-4.0, unlike gcc-4.3, does not see that these variables are
initialized before use.  Convert the descriptor loops to do-while make
this initialization apparent.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-21 09:22:29 -07:00
Andrew Morton
f477f5b331 drivers/dma/ioat/dma_v2.c: fix warnings
drivers/dma/ioat/dma_v2.c: In function 'ioat2_dma_prep_memcpy_lock':
drivers/dma/ioat/dma_v2.c:680: warning: 'hw' may be used uninitialized in this function
drivers/dma/ioat/dma_v2.c:681: warning: 'desc' may be used uninitialized in this function

Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-21 09:17:58 -07:00
Dan Williams
376ec37667 ioat2: clarify ring size limits
With the addition of ioat_max_alloc_order it is not clear what the
maximum allocation order is, so document that in the modinfo.  Also take
an opportunity to kill a stray semicolon.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-16 15:16:50 -07:00
Dan Williams
3208ca52f3 ioat: driver version 4.0
A new ring implementation and the addition of raid functionality
constitutes a bump in the driver major version number.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-10 11:27:36 -07:00
Maciej Sosnowski
1a5aeeecd5 dca: registering requesters in multiple dca domains
This patch enables DCA support on multiple-IOH/multiple-IIO architectures.
It modifies dca module by replacing single dca_providers list
with dca_domains list, each domain containing separate list of providers.
This approach lets dca driver manage multiple domains, i.e. sets of providers
and requesters mapped back to the same PCI root complex device.
The driver takes care to register each requester to a provider
from the same domain.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
2009-09-10 10:00:05 -07:00
Dan Williams
bbb20089a3 Merge branch 'dmaengine' into async-tx-next
Conflicts:
	crypto/async_tx/async_xor.c
	drivers/dma/ioat/dma_v2.h
	drivers/dma/ioat/pci.c
	drivers/md/raid5.c
2009-09-08 17:55:21 -07:00
Dan Williams
162b96e63e ioat2,3: cacheline align software descriptor allocations
All the necessary fields for handling an ioat2,3 ring entry can fit into
one cacheline.  Move ->len prior to ->txd in struct ioat_ring_ent, and
move allocation of these entries to a hw-cache-aligned kmem cache to
reduce the number of cachelines dirtied for descriptor management.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:53:04 -07:00
Dan Williams
ea25968a32 ioat: implement a private tx_list
Drop ioatdma's use of tx_list from struct dma_async_tx_descriptor in
preparation for removal of this field.

Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:53:02 -07:00
Roland Dreier
a6417dd58d I/OAT: Convert to PCI_VDEVICE()
Trivial cleanup to make the PCI ID table easier to read.

[dan.j.williams@intel.com: extended to v3.2 devices]
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:03 -07:00
Roland Dreier
6506cbca6b Add MODULE_DEVICE_TABLE() so ioatdma module is autoloaded
The ioatdma module is missing aliases for the PCI devices it supports,
so it is not autoloaded on boot.  Add a MODULE_DEVICE_TABLE() to get
these aliases.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:03 -07:00
Dan Williams
e3232714d4 ioat3: segregate raid engines
The cleanup routine for the raid cases imposes extra checks for handling
raid descriptors and extended descriptors.  If the channel does not
support raid it can avoid this extra overhead by using the ioat2 cleanup
path.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:02 -07:00
Tom Picard
b265b11fc1 ioat3: ioat3.2 pci ids for Jasper Forest
Jasper Forest introduces raid offload support via ioat3.2 support.  When
raid offload is enabled two (out of 8 channels) will report raid5/raid6
offload capabilities.  The remaining channels will only report ioat3.0
capabilities (memcpy).

Signed-off-by: Tom Picard <tom.s.picard@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:01 -07:00
Dan Williams
58c8649e0e ioat3: interrupt descriptor support
The async_tx api uses the DMA_INTERRUPT operation type to terminate a
chain of issued operations with a callback routine.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:00 -07:00
Dan Williams
ae786624c2 ioat3: support xor via pq descriptors
If a platform advertises pq capabilities, but not xor, then use
ioat3_prep_pqxor and ioat3_prep_pqxor_val to simulate xor support.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:43:00 -07:00
Dan Williams
d69d235b7d ioat3: pq support
ioat3.2 adds support for raid6 syndrome generation (xor sum of galois
field multiplication products) using up to 8 sources.  It can also
perform an pq-zero-sum operation to validate whether the syndrome for a
given set of sources matches a previously computed syndrome.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:59 -07:00
Dan Williams
9de6fc717b ioat3: xor self test
This adds a hardware specific self test to be called from ioat_probe.
In the ioat3 case we will have tests for all the different raid
operations, while ioat1 and ioat2 will continue to just test memcpy.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:58 -07:00
Dan Williams
b094ad3be5 ioat3: xor support
ioat3.2 adds xor offload support for up to 8 sources.  It can also
perform an xor-zero-sum operation to validate whether all given sources
sum to zero, without writing to a destination.  Xor descriptors differ
from memcpy in that one operation may require multiple descriptors
depending on the number of sources.  When the number of sources exceeds
5 an extended descriptor is needed.  These descriptors need to be
accounted for when updating the DMA_COUNT register.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:57 -07:00
Dan Williams
e61dacaeb3 ioat3: enable dca for completion writes
Tag completion writes for direct cache access to reduce the latency of
checking for descriptor completions.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:57 -07:00
Dan Williams
5669e31c5a ioat: add 'ioat' sysfs attributes
Export driver attributes for diagnostic purposes:
'ring_size': total number of descriptors available to the engine
'ring_active': number of descriptors in-flight
'capabilities': supported operation types for this channel
'version': Intel(R) QuickData specfication revision

This also allows some chattiness to be removed from the driver startup
as this information is now available via sysfs.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:56 -07:00
Dan Williams
bf40a6869c ioat3: split ioat3 support to its own file, add memset
Up until this point the driver for Intel(R) QuickData Technology
engines, specification versions 2 and 3, were mostly identical save for
a few quirks.  Version 3.2 hardware adds many new capabilities (like
raid offload support) requiring some infrastructure that is not relevant
for v2.  For better code organization of the new funcionality move v3
and v3.2 support to its own file dma_v3.c, and export some routines from
the base files (dma.c and dma_v2.c) that can be reused directly.

The first new capability included in this code reorganization is support
for v3.2 memset operations.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-09-08 17:42:55 -07:00