Commit Graph

53 Commits

Author SHA1 Message Date
Eric W. Biederman
6d4561110a sysctl: Drop & in front of every proc_handler.
For consistency drop & in front of every proc_handler.  Explicity
taking the address is unnecessary and it prevents optimizations
like stubbing the proc_handlers to NULL.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-18 08:37:40 -08:00
Eric W. Biederman
ab09203e30 sysctl fs: Remove dead binary sysctl support
Now that sys_sysctl is a generic wrapper around /proc/sys  .ctl_name
and .strategy members of sysctl tables are dead code.  Remove them.

Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-12 02:04:55 -08:00
J. Bruce Fields
89996df4b5 lockd: fix list corruption on lockd restart
If lockd is signalled soon enough after restart then locks_start_grace()
will try to re-add an entry to a list and trigger a lock corruption
warning.

Thanks to Wang Chen for the problem report and diagnosis.

WARNING: at lib/list_debug.c:26 __list_add+0x27/0x5c()
...
list_add corruption. next->prev should be prev (ef8fe958), but was ef8ff128.  (next=ef8ff128).
...
Pid: 23062, comm: lockd Tainted: G        W  2.6.30-rc2 #3
Call Trace:
[<c042d5b5>] warn_slowpath+0x71/0xa0
[<c0422a96>] ? update_curr+0x11d/0x125
[<c044b12d>] ? trace_hardirqs_on_caller+0x18/0x150
[<c044b270>] ? trace_hardirqs_on+0xb/0xd
[<c051c61a>] ? _raw_spin_lock+0x53/0xfa
[<c051c89f>] __list_add+0x27/0x5c
[<ef8f6daa>] locks_start_grace+0x22/0x30 [lockd]
[<ef8f34da>] set_grace_period+0x39/0x53 [lockd]
[<c06b8921>] ? lock_kernel+0x1c/0x28
[<ef8f3558>] lockd+0x64/0x164 [lockd]
[<c044b12d>] ? trace_hardirqs_on_caller+0x18/0x150
[<c04227b0>] ? complete+0x34/0x3e
[<ef8f34f4>] ? lockd+0x0/0x164 [lockd]
[<ef8f34f4>] ? lockd+0x0/0x164 [lockd]
[<c043dd42>] kthread+0x45/0x6b
[<c043dcfd>] ? kthread+0x0/0x6b
[<c0403c23>] kernel_thread_helper+0x7/0x10

Reported-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: stable@kernel.org
2009-05-06 17:19:36 -04:00
Chuck Lever
eb16e90778 lockd: Start PF_INET6 listener only if IPv6 support is available
Apparently a lot of people need to disable IPv6 completely on their
distributor-built systems, which have CONFIG_IPV6_MODULE enabled at
build time.

They do this by blacklisting the ipv6.ko module.  This causes the
creation of the lockd service listener to fail if CONFIG_IPV6_MODULE
is set, but the module cannot be loaded.

Now that the kernel's PF_INET6 RPC listeners are completely separate
from PF_INET listeners, we can always start PF_INET.  Then lockd can
try to start PF_INET6, but it isn't required to be available.

Note this has the added benefit that NLM callbacks from AF_INET6
servers will never come from AF_INET remotes.  We no longer have to
worry about matching mapped IPv4 addresses to AF_INET when comparing
addresses.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28 16:01:16 -04:00
Chuck Lever
26298caaca NFS: Revert creation of IPv6 listeners for lockd and NFSv4 callbacks
We're about to convert over to using separate PF_INET and PF_INET6
listeners, instead of a single PF_INET6 listener that also receives
AF_INET requests and maps them to AF_INET6.

Clear the way by removing the logic in lockd and the NFSv4 callback
server that creates an AF_INET6 service listener.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28 15:55:06 -04:00
Chuck Lever
49a9072f29 SUNRPC: Remove @family argument from svc_create() and svc_create_pooled()
Since an RPC service listener's protocol family is specified now via
svc_create_xprt(), it no longer needs to be passed to svc_create() or
svc_create_pooled().  Remove that argument from the synopsis of those
functions, and remove the sv_family field from the svc_serv struct.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28 15:54:48 -04:00
Chuck Lever
9652ada3fb SUNRPC: Change svc_create_xprt() to take a @family argument
The sv_family field is going away.  Pass a protocol family argument to
svc_create_xprt() instead of extracting the family from the passed-in
svc_serv struct.

Again, as this is a listener socket and not an address, we make this
new argument an "int" protocol family, instead of an "sa_family_t."

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28 15:54:36 -04:00
Chuck Lever
0dba7c2a9e NLM: Clean up flow of control in make_socks() function
Clean up: Use Bruce's preferred control flow style in make_socks().

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-07 15:40:44 -05:00
Chuck Lever
d3fe5ea7cf NLM: Refactor make_socks() function
Clean up: extract common logic in NLM's make_socks() function
into a helper.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-07 15:40:44 -05:00
Chuck Lever
b064ec038a lockd: Enable NLM use of AF_INET6
If the kernel is configured to support IPv6 and the RPC server can register
services via rpcbindv4, we are all set to enable IPv6 support for lockd.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aime Le Rouzic <aime.le-rouzic@bull.net>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:56 -05:00
Chuck Lever
b7ba597fb9 NSM: Move nsm_use_hostnames to mon.c
Clean up.

Treat the nsm_use_hostnames global variable like nsm_local_state.
Note that the default value of nsm_use_hostnames is still zero.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:55 -05:00
Chuck Lever
e6765b8397 NSM: Remove include/linux/lockd/sm_inter.h
Clean up: The include/linux/lockd/sm_inter.h header is nearly empty
now.  Remove it.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:55 -05:00
Jeff Layton
c72a476b4b lockd: set svc_serv->sv_maxconn to a more reasonable value (try #3)
The default method for calculating the number of connections allowed
per RPC service arbitrarily limits single-threaded services to 80
connections. This is too low for services like lockd and artificially
limits the number of TCP clients that it can support.

Have lockd set a default sv_maxconn value to 1024 (which is the typical
default value for RLIMIT_NOFILE. Also add a module parameter to allow an
admin to set this to an arbitrary value.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:48 -05:00
Trond Myklebust
2de59872a7 LOCKD: Make lockd_up() and lockd_down() exported GPL-only
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-12-23 15:21:33 -05:00
J. Bruce Fields
2c5e76158f nfsd: clean up grace period on early exit
If nfsd was shut down before the grace period ended, we could end up
with a freed object still on grace_list.  Thanks to Jeff Moyer for
reporting the resulting list corruption warnings.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
2008-11-24 10:12:48 -06:00
Chuck Lever
26a4140923 NLM: Remove "proto" argument from lockd_up()
Clean up: Now that lockd_up() starts listeners for both transports, the
"proto" argument is no longer needed.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-04 17:12:27 -04:00
Chuck Lever
8c3916f4bd NLM: Always start both UDP and TCP listeners
Commit 24e36663, which first appeared in 2.6.19, changed lockd so that
the client side starts a UDP listener only if there is a UDP NFSv2/v3
mount.  Its description notes:

    This... means that lockd will *not* listen on UDP if the only
    mounts are TCP mount (and nfsd hasn't started).

    The latter is the only one that concerns me at all - I don't know
    if this might be a problem with some servers.

Unfortunately it is a problem for Linux itself.  The rpc.statd daemon
on Linux uses UDP for contacting the local lockd, no matter which
protocol is used for NFS mounts.  Without a local lockd UDP listener,
NFSv2/v3 lock recovery from Linux NFS clients always fails.

Revert parts of commit 24e36663 so lockd_up() always starts both
listeners.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-04 17:08:16 -04:00
J. Bruce Fields
af558e33be nfsd: common grace period control
Rewrite grace period code to unify management of grace period across
lockd and nfsd.  The current code has lockd and nfsd cooperate to
compute a grace period which is satisfactory to them both, and then
individually enforce it.  This creates a slight race condition, since
the enforcement is not coordinated.  It's also more complicated than
necessary.

Here instead we have lockd and nfsd each inform common code when they
enter the grace period, and when they're ready to leave the grace
period, and allow normal locking only after both of them are ready to
leave.

We also expect the locks_start_grace()/locks_end_grace() interface here
to be simpler to build on for future cluster/high-availability work,
which may require (for example) putting individual filesystems into
grace, or enforcing grace periods across multiple cluster nodes.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03 16:19:02 -04:00
J. Bruce Fields
c8ab5f2a13 lockd: don't depend on lockd main loop to end grace
End lockd's grace period using schedule_delayed_work() instead of a
check on every pass through the main loop.

After a later patch, we'll depend on lockd to end its grace period even
if it's not currently handling requests; so it shouldn't depend on being
woken up from the main loop to do so.

Also, Nakano Hiroaki (who independently produced a similar patch)
noticed that the current behavior is buggy in the face of jiffies
wraparound:

	"lockd uses time_before() to determine whether the grace period
	has expired. This would seem to be enough to avoid timer
	wrap-around issues, but, unfortunately, that is not the case.
	The time_* family of comparison functions can be safely used to
	compare jiffies relatively close in time, but they stop working
	after approximately LONG_MAX/2 ticks. nfsd can suffer this
	problem because the time_before() comparison in lockd() is not
	performed until the first request comes in, which means that if
	there is no lockd traffic for more than LONG_MAX/2 ticks we are
	screwed.

	"The implication of this is that once time_before() starts
	misbehaving any attempt from a NFS client to execute fcntl()
	will be received with a NLM_LCK_DENIED_GRACE_PERIOD message for
	25 days (assuming HZ=1000). In other words, the 50 seconds grace
	period could turn into a grace period of 50 days or more.

	"Note: This bug was analyzed independently by Oda-san
	<oda@valinux.co.jp> and myself."

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Nakano Hiroaki <nakano.hiroaki@oss.ntt.co.jp>
Cc: Itsuro Oda <oda@valinux.co.jp>
2008-09-29 18:13:10 -04:00
J. Bruce Fields
8fafa90082 locks: allow lockd to process blocked locks during grace period
The check here is currently harmless but unnecessary, since, as the
comment notes, there aren't any blocked-lock callbacks to process
during the grace period anyway.

And eventually we want to allow multiple grace periods that come and go
for different filesystems over the course of the lifetime of lockd, at
which point this check is just going to get in the way.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29 17:56:59 -04:00
Chuck Lever
e851db5b05 SUNRPC: Add address family field to svc_serv data structure
Introduce and initialize an address family field in the svc_serv structure.

This field will determine what family to use for the service's listener
sockets and what families are advertised via the local rpcbind daemon.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-29 17:56:56 -04:00
Jeff Layton
abd1ec4efd lockd: close potential race with rapid lockd_up/lockd_down cycle
If lockd_down is called very rapidly after lockd_up returns, then
there is a slim chance that lockd() will never be called. kthread()
will return before calling the function, so we'll end up never
actually calling the cleanup functions for the thread.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-06-23 13:02:50 -04:00
Linus Torvalds
563307b2fa Merge git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (80 commits)
  SUNRPC: Invalidate the RPCSEC_GSS session if the server dropped the request
  make nfs_automount_list static
  NFS: remove duplicate flags assignment from nfs_validate_mount_data
  NFS - fix potential NULL pointer dereference v2
  SUNRPC: Don't change the RPCSEC_GSS context on a credential that is in use
  SUNRPC: Fix a race in gss_refresh_upcall()
  SUNRPC: Don't disconnect more than once if retransmitting NFSv4 requests
  SUNRPC: Remove the unused export of xprt_force_disconnect
  SUNRPC: remove XS_SENDMSG_RETRY
  SUNRPC: Protect creds against early garbage collection
  NFSv4: Attempt to use machine credentials in SETCLIENTID calls
  NFSv4: Reintroduce machine creds
  NFSv4: Don't use cred->cr_ops->cr_name in nfs4_proc_setclientid()
  nfs: fix printout of multiword bitfields
  nfs: return negative error value from nfs{,4}_stat_to_errno
  NLM/lockd: Ensure client locking calls use correct credentials
  NFS: Remove the buggy lock-if-signalled case from do_setlk()
  NLM/lockd: Fix a race when cancelling a blocking lock
  NLM/lockd: Ensure that nlmclnt_cancel() returns results of the CANCEL call
  NLM: Remove the signal masking in nlmclnt_proc/nlmclnt_cancel
  ...
2008-04-24 11:46:16 -07:00
Jeff Layton
f97c650dda NLM: don't let lockd exit on unexpected svc_recv errors (try #2)
When svc_recv returns an unexpected error, lockd will print a warning
and exit. This problematic for several reasons. In particular, it will
cause the reference counts for the thread to be wrong, and can lead to a
potential BUG() call.

Rather than exiting on error from svc_recv, have the thread do a 1s
sleep and then retry the loop. This is unlikely to cause any harm, and
if the error turns out to be something temporary then it may be able to
recover.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-04-23 16:13:43 -04:00
Jeff Layton
d751a7cd06 NLM: Convert lockd to use kthreads
Have lockd_up start lockd using kthread_run. With this change,
lockd_down now blocks until lockd actually exits, so there's no longer
need for the waitqueue code at the end of lockd_down. This also means
that only one lockd can be running at a time which simplifies the code
within lockd's main loop.

This also adds a check for kthread_should_stop in the main loop of
nlmsvc_retry_blocked and after that function returns. There's no sense
continuing to retry blocks if lockd is coming down anyway.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-04-23 16:13:36 -04:00
Chuck Lever
90d5b18061 NLM: LOCKD fails to load if CONFIG_SYSCTL is not set
Bruce Fields says:
"By the way, we've got another config-related nit here:

	http://bugzilla.linux-nfs.org/show_bug.cgi?id=156

You can build lockd without CONFIG_SYSCTL set, but then the module will
fail to load."

For now, disable the sysctl registration calls in lockd if CONFIG_SYSCTL
is not enabled.  This allows the kernel to build properly if PROC_FS or
SYSCTL is not enabled, but an NFS client is desired.

In the long run, we would like to be able to build the kernel with an
NFS client but without lockd.  This makes sense, for example, if you want
an NFSv4-only NFS client, as NFSv4 doesn't use NLM at all.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-19 18:00:44 -04:00
Pavel Emelyanov
5216a8e70e Wrap buffers used for rpc debug printks into RPC_IFDEBUG
Sorry for the noise, but here's the v3 of this compilation fix :)

There are some places, which declare the char buf[...] on the stack
to push it later into dprintk(). Since the dprintk sometimes (if the
CONFIG_SYSCTL=n) becomes an empty do { } while (0) stub, these buffers
cause gcc to produce appropriate warnings.

Wrap these buffers with RPC_IFDEBUG macro, as Trond proposed, to
compile them out when not needed.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-02-21 18:42:29 -05:00
Tom Tucker
a217813f90 knfsd: Support adding transports by writing portlist file
Update the write handler for the portlist file to allow creating new
listening endpoints on a transport. The general form of the string is:

<transport_name><space><port number>

For example:

echo "tcp 2049" > /proc/fs/nfsd/portlist

This is intended to support the creation of a listening endpoint for
RDMA transports without adding #ifdef code to the nfssvc.c file.

Transports can also be removed as follows:

'-'<transport_name><space><port number>

For example:

echo "-tcp 2049" > /proc/fs/nfsd/portlist

Attempting to add a listener with an invalid transport string results
in EPROTONOSUPPORT and a perror string of "Protocol not supported".

Attempting to remove an non-existent listener (.e.g. bad proto or port)
results in ENOTCONN and a perror string of
"Transport endpoint is not connected"

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-02-01 16:42:13 -05:00
Tom Tucker
7fcb98d58c svc: Add svc API that queries for a transport instance
Add a new svc function that allows a service to query whether a
transport instance has already been created. This is used in lockd
to determine whether or not a transport needs to be created when
a lockd instance is brought up.

Specifying 0 for the address family or port is effectively a wild-card,
and will result in matching the first transport in the service's list
that has a matching class name.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-02-01 16:42:13 -05:00
Tom Tucker
7a18208383 svc: Make close transport independent
Move sk_list and sk_ready to svc_xprt. This involves close because these
lists are walked by svcs when closing all their transports. So I combined
the moving of these lists to svc_xprt with making close transport independent.

The svc_force_sock_close has been changed to svc_close_all and takes a list
as an argument. This removes some svc internals knowledge from the svcs.

This code races with module removal and transport addition.

Thanks to Simon Holm Thøgersen for a compile fix.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Simon Holm Thøgersen <odie@cs.aau.dk>
2008-02-01 16:42:11 -05:00
Tom Tucker
d7c9f1ed97 svc: Change services to use new svc_create_xprt service
Modify the various kernel RPC svcs to use the svc_create_xprt service.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Acked-by: Neil Brown <neilb@suse.de>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Greg Banks <gnb@sgi.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-02-01 16:42:09 -05:00
Marc Eshel
9a8db97e77 knfsd: lockd: nfsd4: use same grace period for lockd and nfsd4
Both lockd and (in the nfsv4 case) nfsd enforce a "grace period" after reboot,
during which clients may reclaim locks from the previous server instance, but
may not acquire new locks.

Currently the lockd and nfsd enforce grace periods of different lengths.  This
may cause problems when we reboot a server with both v2/v3 and v4 clients.
For example, if the lockd grace period is shorter (as is likely the case),
then a v3 client might acquire a new lock that conflicts with a lock already
held (but not yet reclaimed) by a v4 client.

This patch calculates a lease time that lockd and nfsd can both use.

Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:07 -07:00
Rafael J. Wysocki
8314418629 Freezer: make kernel threads nonfreezable by default
Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves.  This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.

It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.

The patch causes all kernel threads to be nonfreezable by default (ie.  to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE.  It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear.  Additionally, it updates documentation to
describe the freezing of tasks more accurately.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Trond Myklebust
f61534dfd3 SUNRPC: Remove redundant calls to rpciod_up()/rpciod_down()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:30 -04:00
Robert P. J. Day
405ae7d381 Replace remaining references to "driverfs" with "sysfs".
Globally, s/driverfs/sysfs/g.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:13:42 +01:00
Eric W. Biederman
0b4d414714 [PATCH] sysctl: remove insert_at_head from register_sysctl
The semantic effect of insert_at_head is that it would allow new registered
sysctl entries to override existing sysctl entries of the same name.  Which is
pain for caching and the proc interface never implemented.

I have done an audit and discovered that none of the current users of
register_sysctl care as (excpet for directories) they do not register
duplicate sysctl entries.

So this patch simply removes the support for overriding existing entries in
the sys_sysctl interface since no one uses it or cares and it makes future
enhancments harder.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Corey Minyard <minyard@acm.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:59 -08:00
Chuck Lever
ad06e4bd62 [PATCH] knfsd: SUNRPC: Add a function to format the address in an svc_rqst for printing
There are loads of places where the RPC server assumes that the rq_addr fields
contains an IPv4 address.  Top among these are error and debugging messages
that display the server's IP address.

Let's refactor the address printing into a separate function that's smart
enough to figure out the difference between IPv4 and IPv6 addresses.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:35 -08:00
Chuck Lever
482fb94e1b [PATCH] knfsd: SUNRPC: allow creating an RPC service without registering with portmapper
Sometimes we need to create an RPC service but not register it with the local
portmapper.  NFSv4 delegation callback, for example.

Change the svc_makesock() API to allow optionally creating temporary or
permanent sockets, optionally registering with the local portmapper, and make
it return the ephemeral port of the new socket.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:35 -08:00
Eric W. Biederman
7cc13edc13 [PATCH] sysctl: implement CTL_UNNUMBERED
This patch takes the CTL_UNNUMBERD concept from NFS and makes it available to
all new sysctl users.

At the same time the sysctl binary interface maintenance documentation is
updated to mention and to describe what is needed to successfully maintain the
sysctl binary interface.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-06 01:46:23 -08:00
Olaf Kirch
460f5cac1e [PATCH] knfsd: export nsm_local_state to user space via sysctl
Every NLM call includes the client's NSM state.  Currently, the Linux client
always reports 0 - which seems not to cause any problems, but is not what the
protocol says.

This patch exposes the kernel's internal variable to user space via a sysctl,
which can be set at system boot time by statd.

Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:18 -07:00
Olaf Kirch
abd1f50094 [PATCH] knfsd: lockd: optionally use hostnames for identifying peers
This patch adds the nsm_use_hostnames sysctl and module param.  If set, lockd
will use the client's name (as given in the NLM arguments) to find the NSM
handle.  This makes recovery work when the NFS peer is multi-homed, and the
reboot notification arrives from a different IP than the original lock calls.

Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:17 -07:00
NeilBrown
4a3ae42dc3 [PATCH] knfsd: Correctly handle error condition from lockd_up
If lockd_up fails - what should we expect?  Do we have to later call
lockd_down?

Well the nfs client thinks "no", the nfs server thinks "yes".  lockd thinks
"yes".

The only answer that really makes sense is "no" !!

So:
  Make lockd_up only increment  nlmsvc_users on success.
  Make nfsd handle errors from lockd_up properly.
  Make sure lockd_up(0) never fails when lockd is running
    so that the 'reclaimer' call to lockd_up doesn't need to
    be error checked.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:18 -07:00
NeilBrown
7dcf91ec66 [PATCH] knfsd: Move makesock failed warning into make_socks.
Thus it is printed for any path that leads to failure (make_socks is called
from two places).

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:18 -07:00
NeilBrown
6fb2b47fa1 [PATCH] knfsd: Drop 'serv' option to svc_recv and svc_process
It isn't needed as it is available in rqstp->rq_server, and dropping it allows
some local vars to be dropped.

[akpm@osdl.org: build fix]
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:18 -07:00
NeilBrown
24e36663c3 [PATCH] knfsd: be more selective in which sockets lockd listens on
Currently lockd listens on UDP always, and TCP if CONFIG_NFSD_TCP is set.

However as lockd performs services of the client as well, this is a problem.
If CONFIG_NfSD_TCP is not set, and a tcp mount is used, the server will not be
able to call back to lockd.

So:
 - add an option to lockd_up saying which protocol is needed
 - Always open sockets for which an explicit port was given, otherwise
   only open a socket of the type required
 - Change nfsd to do one lockd_up per socket rather than one per thread.

This
 - removes the dependancy on CONFIG_NFSD_TCP
 - means that lockd may open sockets other than at startup
 - means that lockd will *not* listen on UDP if the only
   mounts are TCP mount (and nfsd hasn't started).

The latter is the only one that concerns me at all - I don't know if this
might be a problem with some servers.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:17 -07:00
NeilBrown
bc591ccff2 [PATCH] knfsd: add a callback for when last rpc thread finishes
nfsd has some cleanup that it wants to do when the last thread exits, and
there will shortly be some more.  So collect this all into one place and
define a callback for an rpc service to call when the service is about to be
destroyed.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:17 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Ingo Molnar
353ab6e97b [PATCH] sem2mutex: fs/
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Cc: Robert Love <rml@tech9.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:56:55 -08:00
Tobias Klauser
e8c96f8c29 [PATCH] fs: Use ARRAY_SIZE macro
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a
duplicate of ARRAY_SIZE.  Some trailing whitespaces are also deleted.

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Cc: David Howells <dhowells@redhat.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:19 -08:00
Trond Myklebust
2bd615797e SUNRPC: Ensure that SIGKILL will always terminate a synchronous RPC call.
...and make sure that the "intr" flag also enables SIGHUP and SIGTERM to
 interrupt RPC calls too (as per the Solaris implementation).

 Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-01-06 14:58:45 -05:00