Broadwell (BDW) is similar to Haswell (HSW), the preceding processor generation.
Currently, the only difference in their C-state tables is that PC3 max exit latency
is 33usec on HSW and 40usec on BDW.
Signed-off-by: Len Brown <len.brown@intel.com>
Power efficiency improves on Baytrail (Intel Atom Processor E3000)
when Linux disables C6 auto-demotion.
Based on work by Srinidhi Kasagar <srinidhi.kasagar@intel.com>.
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: x86@kernel.org
If a scsi host driver specifies .cmd_len in it's scsi_host_template, a driver's
private command pool is needed. scsi_find_host_cmd_pool() will locate it, but
scsi_alloc_host_cmd_pool() isn't saving the pool address in the host template.
This will result in an access error when the host is removed.
Avoid the problem by saving the address of a new allocated command pool where
it is expected.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 89d9a56795
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
The latest kernel fails to boot qemu arm images when using scsi
for disk access. Boot gets stuck after the following messages.
brd: module loaded
sym53c8xx 0000:00:0c.0: enabling device (0100 -> 0103)
sym0: <895a> rev 0x0 at pci 0000:00:0c.0 irq 93
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi host0: sym-2.2.3
Bisect points to commit 71e75c97f9 ("scsi: convert device_busy to
atomic_t"). Code inspection shows the following suspicious change
in scsi_request_fn.
out_delay:
- if (sdev->device_busy == 0 && !scsi_device_blocked(sdev))
+ if (atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
blk_delay_queue(q, SCSI_QUEUE_DELAY);
}
'sdev->device_busy == 0' was replaced with 'atomic_read(&sdev->device_busy)',
meaning the logic was reversed. Changing this expression to
'!atomic_read(&sdev->device_busy)' fixes the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 71e75c97f9
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
The commit
4982223e51 module: set nx before marking module MODULE_STATE_COMING.
introduced a regression: if a module fails to parse its arguments or
if mod_sysfs_setup fails, then the module's memory will be freed
while still read-only. Anything that reuses that memory will crash
as soon as it tries to write to it.
Cc: stable@vger.kernel.org # v3.16
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Truncates and renames are often used to replace old versions of a file
with new versions. Applications often expect this to be an atomic
replacement, even if they haven't done anything to make sure the new
version is fully on disk.
Btrfs has strict flushing in place to make sure that renaming over an
old file with a new file will fully flush out the new file before
allowing the transaction commit with the rename to complete.
This ordering means the commit code needs to be able to lock file pages,
and there are a few paths in the filesystem where we will try to end a
transaction with the page lock held. It's rare, but these things can
deadlock.
This patch removes the ordered flushes and switches to a best effort
filemap_flush like ext4 uses. It's not perfect, but it should fix the
deadlocks.
Signed-off-by: Chris Mason <clm@fb.com>
Under rare circumstances we can end up leaving 2 versions of a checksum
for the same file extent range.
The reason for this is that after calling btrfs_next_leaf we process
slot 0 of the leaf it returns, instead of processing the slot set in
path->slots[0]. Most of the time (by far) path->slots[0] is 0, but after
btrfs_next_leaf() releases the path and before it searches for the next
leaf, another task might cause a split of the next leaf, which migrates
some of its keys to the leaf we were processing before calling
btrfs_next_leaf(). In this case btrfs_next_leaf() returns again the
same leaf but with path->slots[0] having a slot number corresponding
to the first new key it got, that is, a slot number that didn't exist
before calling btrfs_next_leaf(), as the leaf now has more keys than
it had before. So we must really process the returned leaf starting at
path->slots[0] always, as it isn't always 0, and the key at slot 0 can
have an offset much lower than our search offset/bytenr.
For example, consider the following scenario, where we have:
sums->bytenr: 40157184, sums->len: 16384, sums end: 40173568
four 4kb file data blocks with offsets 40157184, 40161280, 40165376, 40169472
Leaf N:
slot = 0 slot = btrfs_header_nritems() - 1
|-------------------------------------------------------------------|
| [(CSUM CSUM 39239680), size 8] ... [(CSUM CSUM 40116224), size 4] |
|-------------------------------------------------------------------|
Leaf N + 1:
slot = 0 slot = btrfs_header_nritems() - 1
|--------------------------------------------------------------------|
| [(CSUM CSUM 40161280), size 32] ... [((CSUM CSUM 40615936), size 8 |
|--------------------------------------------------------------------|
Because we are at the last slot of leaf N, we call btrfs_next_leaf() to
find the next highest key, which releases the current path and then searches
for that next key. However after releasing the path and before finding that
next key, the item at slot 0 of leaf N + 1 gets moved to leaf N, due to a call
to ctree.c:push_leaf_left() (via ctree.c:split_leaf()), and therefore
btrfs_next_leaf() will returns us a path again with leaf N but with the slot
pointing to its new last key (CSUM CSUM 40161280). This new version of leaf N
is then:
slot = 0 slot = btrfs_header_nritems() - 2 slot = btrfs_header_nritems() - 1
|----------------------------------------------------------------------------------------------------|
| [(CSUM CSUM 39239680), size 8] ... [(CSUM CSUM 40116224), size 4] [(CSUM CSUM 40161280), size 32] |
|----------------------------------------------------------------------------------------------------|
And incorrecly using slot 0, makes us set next_offset to 39239680 and we jump
into the "insert:" label, which will set tmp to:
tmp = min((sums->len - total_bytes) >> blocksize_bits,
(next_offset - file_key.offset) >> blocksize_bits) =
min((16384 - 0) >> 12, (39239680 - 40157184) >> 12) =
min(4, (u64)-917504 = 18446744073708634112 >> 12) = 4
and
ins_size = csum_size * tmp = 4 * 4 = 16 bytes.
In other words, we insert a new csum item in the tree with key
(CSUM_OBJECTID CSUM_KEY 40157184 = sums->bytenr) that contains the checksums
for all the data (4 blocks of 4096 bytes each = sums->len). Which is wrong,
because the item with key (CSUM CSUM 40161280) (the one that was moved from
leaf N + 1 to the end of leaf N) contains the old checksums of the last 12288
bytes of our data and won't get those old checksums removed.
So this leaves us 2 different checksums for 3 4kb blocks of data in the tree,
and breaks the logical rule:
Key_N+1.offset >= Key_N.offset + length_of_data_its_checksums_cover
An obvious bad effect of this is that a subsequent csum tree lookup to get
the checksum of any of the blocks with logical offset of 40161280, 40165376
or 40169472 (the last 3 4kb blocks of file data), will get the old checksums.
Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We've got bug reports that btrfs crashes when quota is enabled on
32bit kernel, typically with the Oops like below:
BUG: unable to handle kernel NULL pointer dereference at 00000004
IP: [<f9234590>] find_parent_nodes+0x360/0x1380 [btrfs]
*pde = 00000000
Oops: 0000 [#1] SMP
CPU: 0 PID: 151 Comm: kworker/u8:2 Tainted: G S W 3.15.2-1.gd43d97e-default #1
Workqueue: btrfs-qgroup-rescan normal_work_helper [btrfs]
task: f1478130 ti: f147c000 task.ti: f147c000
EIP: 0060:[<f9234590>] EFLAGS: 00010213 CPU: 0
EIP is at find_parent_nodes+0x360/0x1380 [btrfs]
EAX: f147dda8 EBX: f147ddb0 ECX: 00000011 EDX: 00000000
ESI: 00000000 EDI: f147dda4 EBP: f147ddf8 ESP: f147dd38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 00000004 CR3: 00bf3000 CR4: 00000690
Stack:
00000000 00000000 f147dda4 00000050 00000001 00000000 00000001 00000050
00000001 00000000 d3059000 00000001 00000022 000000a8 00000000 00000000
00000000 000000a1 00000000 00000000 00000001 00000000 00000000 11800000
Call Trace:
[<f923564d>] __btrfs_find_all_roots+0x9d/0xf0 [btrfs]
[<f9237bb1>] btrfs_qgroup_rescan_worker+0x401/0x760 [btrfs]
[<f9206148>] normal_work_helper+0xc8/0x270 [btrfs]
[<c025e38b>] process_one_work+0x11b/0x390
[<c025eea1>] worker_thread+0x101/0x340
[<c026432b>] kthread+0x9b/0xb0
[<c0712a71>] ret_from_kernel_thread+0x21/0x30
[<c0264290>] kthread_create_on_node+0x110/0x110
This indicates a NULL corruption in prefs_delayed list. The further
investigation and bisection pointed that the call of ulist_add_merge()
results in the corruption.
ulist_add_merge() takes u64 as aux and writes a 64bit value into
old_aux. The callers of this function in backref.c, however, pass a
pointer of a pointer to old_aux. That is, the function overwrites
64bit value on 32bit pointer. This caused a NULL in the adjacent
variable, in this case, prefs_delayed.
Here is a quick attempt to band-aid over this: a new function,
ulist_add_merge_ptr() is introduced to pass/store properly a pointer
value instead of u64. There are still ugly void ** cast remaining
in the callers because void ** cannot be taken implicitly. But, it's
safer than explicit cast to u64, anyway.
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=887046
Cc: <stable@vger.kernel.org> [v3.11+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
When failing to allocate space for the whole compressed extent, we'll
fallback to uncompressed IO, but we've forgotten to redirty the pages
which belong to this compressed extent, and these 'clean' pages will
simply skip 'submit' part and go to endio directly, at last we got data
corruption as we write nothing.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Tested-By: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Chris Mason <clm@fb.com>
ulist_add() can return '1' on sucess, which qgroup_subtree_accounting()
doesn't take into account. As a result, that value can be bubbled up to
callers, causing an error to be printed. Fix this by only returning the
value of ulist_add() when it indicates an error.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
During its tree walk, btrfs_drop_snapshot() will skip any shared
subtrees it encounters. This is incorrect when we have qgroups
turned on as those subtrees need to have their contents
accounted. In particular, the case we're concerned with is when
removing our snapshot root leaves the subtree with only one root
reference.
In those cases we need to find the last remaining root and add
each extent in the subtree to the corresponding qgroup exclusive
counts.
This patch implements the shared subtree walk and a new qgroup
operation, BTRFS_QGROUP_OPER_SUB_SUBTREE. When an operation of
this type is encountered during qgroup accounting, we search for
any root references to that extent and in the case that we find
only one reference left, we go ahead and do the math on it's
exclusive counts.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Before processing the extent buffer, acquire a read lock on it, so
that we're safe against concurrent updates on the extent buffer.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Before I extended the no_quota arg to btrfs_dec/inc_ref because I didn't
understand how snapshot delete was using it and assumed that we needed the
quota operations there. With Mark's work this has turned out to be not the
case, we _always_ need to use no_quota for btrfs_dec/inc_ref, so just drop the
argument and make __btrfs_mod_ref call it's process function with no_quota set
always. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
This has been discussed in thread:
http://thread.gmane.org/gmane.comp.file-systems.btrfs/32528
and this patch implements this proposal:
http://thread.gmane.org/gmane.comp.file-systems.btrfs/32536
Works fine for "clean" raid profiles where the raid factor correction
does the right job. Otherwise it's pessimistic and may show low space
although there's still some left.
The df nubmers are lightly wrong in case of mixed block groups, but this
is not a major usecase and can be addressed later.
The RAID56 numbers are wrong almost the same way as before and will be
addressed separately.
CC: Hugo Mills <hugo@carfax.org.uk>
CC: cwillu <cwillu@cwillu.com>
CC: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
alpha2 is defined as 2-chars array, but is used in multiple
places as string (e.g. with nla_put_string calls), which
might leak kernel data.
Solve it by simply adding an extra char for the NULL
terminator, making such operations safe.
Cc: stable@vger.kernel.org
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This has been a pretty exciting release in terms of the framework, we've
finally got support for multiple CODECs attached to a single DAI link
which has been something there's been interest in as long as I've been
working on ASoC. A big thanks to Benoit and Misael for their work on
this.
Otherwise it's been a fairly standard release for development, including
more componentisation work from Lars-Peter and a good selection of both
CODEC and CPU drivers.
- Support for multiple CODECs attached to a single DAI, enabling
systems with for example multiple DAC/speaker drivers on a single
link, contributed by Benoit Cousson based on work from Misael Lopez
Cruz.
- Support for byte controls larger than 256 bytes based on the use of
TLVs contributed by Omair Mohammed Abdullah.
- More componentisation work from Lars-Peter Clausen.
- The remainder of the conversions of CODEC drivers to params_width()
- Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments
TAS2552.
- Lots of updates and fixes, especially to the DaVinci, Intel,
Freescale, Realtek, and rcar drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pnce
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.17' into asoc-linus
ASoC: Updates for v3.17
This has been a pretty exciting release in terms of the framework, we've
finally got support for multiple CODECs attached to a single DAI link
which has been something there's been interest in as long as I've been
working on ASoC. A big thanks to Benoit and Misael for their work on
this.
Otherwise it's been a fairly standard release for development, including
more componentisation work from Lars-Peter and a good selection of both
CODEC and CPU drivers.
- Support for multiple CODECs attached to a single DAI, enabling
systems with for example multiple DAC/speaker drivers on a single
link, contributed by Benoit Cousson based on work from Misael Lopez
Cruz.
- Support for byte controls larger than 256 bytes based on the use of
TLVs contributed by Omair Mohammed Abdullah.
- More componentisation work from Lars-Peter Clausen.
- The remainder of the conversions of CODEC drivers to params_width()
- Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments
TAS2552.
- Lots of updates and fixes, especially to the DaVinci, Intel,
Freescale, Realtek, and rcar drivers.
# gpg: Signature made Mon 04 Aug 2014 17:13:21 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
A bigger batch of changes than I would like as I didn't send any for a
few weeks without noticing how many had built up. They are almost all
driver specific though, larger changes are:
- Fixes to the newly added Baytrail/MAX98090 which look like some QA
was missed on the microphone detection.
- Deletion of some erroniously listed audio formats for Haswell.
- Fix debugfs creation in the core so that we don't try to generate
multiple directories with the same name, relatively large textually
but simple to inspect by eye and test.
- A couple of bugfixes for the rcar driver one of which which involves
a bit of code motion to move initailisation of some hardware out of
common paths into device specific ones.
- Ensure both channels are powered up for mono outputs on Arizona
devices, involving some simple data tables listing the outputs and a
loop over them.
- A couple of fixes to save and restore information on suspended and
idle Samsung I2S controllers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aqRS
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.16-rc5' into asoc-linus
ASoC: Fixes for v3.16
A bigger batch of changes than I would like as I didn't send any for a
few weeks without noticing how many had built up. They are almost all
driver specific though, larger changes are:
- Fixes to the newly added Baytrail/MAX98090 which look like some QA
was missed on the microphone detection.
- Deletion of some erroniously listed audio formats for Haswell.
- Fix debugfs creation in the core so that we don't try to generate
multiple directories with the same name, relatively large textually
but simple to inspect by eye and test.
- A couple of bugfixes for the rcar driver one of which which involves
a bit of code motion to move initailisation of some hardware out of
common paths into device specific ones.
- Ensure both channels are powered up for mono outputs on Arizona
devices, involving some simple data tables listing the outputs and a
loop over them.
- A couple of fixes to save and restore information on suspended and
idle Samsung I2S controllers.
# gpg: Signature made Tue 22 Jul 2014 00:52:53 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
Quite a few build coverage fixes in here among the usual small driver
fixes includling the sigmadsp change from Lars - moving the driver to
separate modules per bus (which is basically just code motion) avoids
issues with some combinations of buses being enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=O7yF
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.16-rc1' into asoc-linus
ASoC: Fixes for v3.16
Quite a few build coverage fixes in here among the usual small driver
fixes includling the sigmadsp change from Lars - moving the driver to
separate modules per bus (which is basically just code motion) avoids
issues with some combinations of buses being enabled.
# gpg: Signature made Thu 19 Jun 2014 11:57:31 BST using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg: aka "Mark Brown <broonie@debian.org>"
# gpg: aka "Mark Brown <broonie@kernel.org>"
# gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg: aka "Mark Brown <broonie@linaro.org>"
# gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
The receive hang detection routine was never being run when
PTP was enabled.
Change-ID: I200f35b0f3190d31b595df89d678f4c8a2131ba0
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In some functions we might be doing potential dereference
without a check. This patch puts the check in place for all these
functions. Also fix the "for loops" so that we increment VF at the
right place so that we always do it even if we are short-circuiting
the loop through continue.
Change-ID: Id4276cfb1e841031bb7b6d6790c414242f364a9f
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Whenever we get a Tx hang we issue a PFR, which means we send AQ
messages to VFS about the reset coming. Unfortunately with the recent
fix to be able to send messages to all VFS which earlier was not
happening at all we now are sending messages to not just the VFS that
are up but also to VFS that are not up. AQ complains about this and
sends us an error in ARQ called LAN overflow event for a queue. We
check if the queue belongs to a VF and if it does we try to send a
vc_notify_vf_reset message to that VF. Well if the VF is not up/enabled
we will be entering this function with a non-active VF id. In this
function we were assuming VF struct is populated but it won't be if
the VF is not active.
Change-ID: Ic6733cda4582d3609fe6d83b2872bb2dcdc73f4a
Signed-off-by: Ashish N Shah <ashish.n.shah@intel.com>
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
If the device data is not accessible for some reason, returning 0 will cause the call to be
continuously called again as none of the string has been 'consumed'.
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The khwrngd thread is started when a hwrng device of sufficient
quality is registered. The virtio-rng device is backed by the
hypervisor, and we trust the hypervisor to provide real entropy.
A malicious or badly-implemented hypervisor is a scenario that's
irrelevant -- such a setup is bound to cause all sorts of badness, and a
compromised hwrng is the least of the user's worries.
Given this, we might as well assume that the quality of randomness we
receive is perfectly trustworthy. Hence, we use 100% for the factor,
indicating maximum confidence in the source.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: H. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- Fix for an ACPI-based device hotplug regression introduced in 3.14
that causes a kernel panic to trigger when memory hot-remove is
attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen.
- Fix for a cpufreq regression introduced in 3.16 that triggers a
"sleeping function called from invalid context" bug in
dev_pm_opp_init_cpufreq_table() from Stephen Boyd.
- ACPI battery driver fix for a warning message added in 3.16 that
prints silly stuff sometimes from Mariusz Ceier.
- Hibernation fix for safer handling of mismatches in the 820 memory
map between the configurations during image creation and during
the subsequent restore from Chun-Yi Lee.
- ACPI processor driver fix to handle CPU hotplug notifications
correctly during system suspend/resume from Lan Tianyu.
- Series of four cpuidle menu governor cleanups that also should
speed it up a bit from Mel Gorman.
- Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus Pargmann
and Uwe Kleine-König.
- Version 3.0 of the analyze_suspend.py suspend profiling tool
from Todd E Brandt.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=kpiw
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
"These are a couple of regression fixes, cpuidle menu governor
optimizations, fixes for ACPI proccessor and battery drivers,
hibernation fix to avoid problems related to the e820 memory map,
fixes for a few cpufreq drivers and a new version of the suspend
profiling tool analyze_suspend.py.
Specifics:
- Fix for an ACPI-based device hotplug regression introduced in 3.14
that causes a kernel panic to trigger when memory hot-remove is
attempted with CONFIG_ACPI_HOTPLUG_MEMORY unset from Tang Chen
- Fix for a cpufreq regression introduced in 3.16 that triggers a
"sleeping function called from invalid context" bug in
dev_pm_opp_init_cpufreq_table() from Stephen Boyd
- ACPI battery driver fix for a warning message added in 3.16 that
prints silly stuff sometimes from Mariusz Ceier
- Hibernation fix for safer handling of mismatches in the 820 memory
map between the configurations during image creation and during the
subsequent restore from Chun-Yi Lee
- ACPI processor driver fix to handle CPU hotplug notifications
correctly during system suspend/resume from Lan Tianyu
- Series of four cpuidle menu governor cleanups that also should
speed it up a bit from Mel Gorman
- Fixes for the speedstep-smi, integrator, cpu0 and arm_big_little
cpufreq drivers from Hans Wennborg, Himangi Saraogi, Markus
Pargmann and Uwe Kleine-König
- Version 3.0 of the analyze_suspend.py suspend profiling tool from
Todd E Brandt"
* tag 'pm+acpi-3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / battery: Fix warning message in acpi_battery_get_state()
PM / tools: analyze_suspend.py: update to v3.0
cpufreq: arm_big_little: fix module license spec
cpufreq: speedstep-smi: fix decimal printf specifiers
ACPI / hotplug: Check scan handlers in acpi_scan_hot_remove()
cpufreq: OPP: Avoid sleeping while atomic
cpufreq: cpu0: Do not print error message when deferring
cpufreq: integrator: Use set_cpus_allowed_ptr
PM / hibernate: avoid unsafe pages in e820 reserved regions
ACPI / processor: Make acpi_cpu_soft_notify() process CPU FROZEN events
cpuidle: menu: Lookup CPU runqueues less
cpuidle: menu: Call nr_iowait_cpu less times
cpuidle: menu: Use ktime_to_us instead of reinventing the wheel
cpuidle: menu: Use shifts when calculating averages where possible
Miscellaneous
- Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jJGu
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull DEFINE_PCI_DEVICE_TABLE removal from Bjorn Helgaas:
"Part two of the PCI changes for v3.17:
- Remove DEFINE_PCI_DEVICE_TABLE macro use (Benoit Taine)
It's a mechanical change that removes uses of the
DEFINE_PCI_DEVICE_TABLE macro. I waited until later in the merge
window to reduce conflicts, but it's possible you'll still see a few"
* tag 'pci-v3.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
Commit 21d70354bb ("drm: move drm_stub.c to drm_drv.c") moves the code
from drm_stub.c into drm_drv.c. Update DocBook to include that instead.
This also came in via other people, but all the same.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
A couple of thinkos from the -next merge, some random fixes from a
coverity scan, fix for (at least) GK106 accidentally using
non-existent vram on some board configurations, and better behaviour
of the instmem allocations if vmalloc space runs out.
* 'linux-3.17' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/platform: fix compilation error
drm/nouveau/gk20a: add LTC device
drm/nouveau: warn if we fail to re-pin fb on resume
drm/nouveau/nvif: fix dac load detect method definition
drm/gf100-/gr: fix -ENOSPC detection when allocating zbc table entries
drm/nouveau/nvif: return null pointers on failure, in addition to ret != 0
drm/nouveau/ltc: fix tag base address getting truncated if above 4GiB
drm/nvc0-/fb/ram: fix use of non-existant ram if partitions aren't uniform
drm/nouveau/bar: behave better if ioremap failed
drm/nouveau/kms: nouveau_fbcon_accel_fini can be static
drm/nouveau: kill unused variable warning if !__OS_HAS_AGP
drm/nouveau/nvif: fix a number of notify thinkos
Pull Sparc fixes from David Miller:
"Hook up the memfd syscall, and properly claim all PCI resources
discovered when building the PCI device tree"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: Hook up memfd_create system call.
sparc64: Properly claim resources as each PCI bus is probed.
sparc64: Skip bogus PCI bridge ranges.
sparc64: Expand PCI bridge probing debug logging.
Pull networking fixes from David Miller:
"I'm sending this out, in particular, to get the iwlwifi fix
propagated:
1) Fix build due to missing include in i40e driver, from Lucas
Tanure.
2) Memory leak in openvswitch port allocation, from Chirstoph Jaeger.
3) Check DMA mapping errors in myri10ge, from Stanislaw Gruszka.
4) Fix various deadlock scenerios in sunvnet driver, from Sowmini
Varadhan.
5) Fix cxgb4i build failures with incompatible Kconfig settings of
the driver vs ipv6, from Anish Bhatt.
6) Fix generation of ACK packet timestamps in the presence of TSO
which will be split up, from Willem de Bruijn.
7) Don't enable sched scan in iwlwifi driver, it causes firmware
crashes in some revisions. From Emmanuel Grumbach.
8) Revert a macvlan simplification that causes crashes.
9) Handle RTT calculations properly in the presence of repair'd SKBs,
from Andrey Vagin.
10) SIT tunnel lookup uses wrong device index in compares, from
Shmulik Ladkani.
11) Handle MTU reductions in TCP properly for ipv4 mapped ipv6
sockets, from Neal Cardwell.
12) Add missing annotations in rhashtable code, from Thomas Graf.
13) Fix false interpretation of two RTOs as being from the same TCP
loss event in the FRTO code, from Neal Cardwell"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
netlink: Annotate RCU locking for seq_file walker
rhashtable: fix annotations for rht_for_each_entry_rcu()
rhashtable: unexport and make rht_obj() static
rhashtable: RCU annotations for next pointers
tcp: fix ssthresh and undo for consecutive short FRTO episodes
tcp: don't allow syn packets without timestamps to pass tcp_tw_recycle logic
tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced()
sit: Fix ipip6_tunnel_lookup device matching criteria
net: ethernet: ibm: ehea: Remove duplicate object from Makefile
net: xgene: Check negative return value of xgene_enet_get_ring_size()
tcp: don't use timestamp from repaired skb-s to calculate RTT (v2)
net: xilinx: Remove .owner field for driver
Revert "macvlan: simplify the structure port"
iwlwifi: mvm: disable scheduled scan to prevent firmware crash
xen-netback: remove loop waiting function
xen-netback: don't stop dealloc kthread too early
xen-netback: move NAPI add/remove calls
xen-netback: fix debugfs entry creation
xen-netback: fix debugfs write length check
net-timestamp: fix missing tcp fragmentation cases
...
John W. Linville says:
====================
pull request: wireless 2014-08-14
Please pull this batch of fixes intended for the 3.17 stream...
Arend van Spriel brings two brcmfmac fixes, one which fixes a memory
leak and one which corrects some merge damage.
Emmanuel Grumbach fixes Linus's iwlwifi firmware-related log spam.
Rickard Strandqvist does some proper NULL termination after a call
to strncpy.
Ronald Wahl corrects a carl9170 problem with sending URBs with the
wrong endpoint type (resulting in log spam).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Silences the following sparse warnings:
net/netlink/af_netlink.c:2926:21: warning: context imbalance in 'netlink_seq_start' - wrong count at exit
net/netlink/af_netlink.c:2972:13: warning: context imbalance in 'netlink_seq_stop' - unexpected unlock
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Call rcu_deference_raw() directly from within rht_for_each_entry_rcu()
as list_for_each_entry_rcu() does.
Fixes the following sparse warnings:
net/netlink/af_netlink.c:2906:25: expected struct rhash_head const *__mptr
net/netlink/af_netlink.c:2906:25: got struct rhash_head [noderef] <asn:4>*<noident>
Fixes: e341694e3e ("netlink: Convert netlink_lookup() to use RCU protected hash table")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
No need to export rht_obj(), all inner to outer object translations
occur internally. It was intended to be used with rht_for_each() which
now primarily serves as the iterator for rhashtable_remove_pprev() to
effectively flush and free the full table.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Properly annotate next pointers as access is RCU protected in
the lookup path.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
nouveau_platform.c was still using the old nouveau_dev() macro,
triggering a compilation error. Fix this.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
LTC device is now required for PGRAPH to work, add it.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reported by Coverity. The intention is that the return value is
checked, but let's be more paranoid and make it extremely obvious
if something forgets to.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
