Commit Graph

12 Commits

Author SHA1 Message Date
Fabio Estevam
78c73591a9 ARM: mx5: Add watchdog support for MX53
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18 10:57:56 +01:00
Uwe Kleine-König
ab13042126 ARM: mx5: use .init_early to initialize cpu type, reset address and iomuxer
This used to be done in .map_io which is supposed to only setup the
memory mapping.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10 14:23:49 +01:00
Fabio Estevam
8c2efec3cd ARM: mx5: add support for the two watchdog modules
MX51 has two watchdog modules.

Add support for both of them.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-07 20:03:11 +01:00
Dinh Nguyen
9ab4650f71 ARM: imx: Get the silicon version from the IIM module
Instead of reading the silicon version from ROM, we should
read the SREV register from the IIM.

Freescale has dropped all support for MX51 REV1.0, only MX51
REV 2.0 and 3.0 are valid.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-28 19:51:47 +01:00
Dinh Nguyen
b66ff7a2cd ARM: imx: Add mx53 support to common msl functions.
Add mx53 support to cpu.c and mm.c.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24 10:09:06 +01:00
Dinh Nguyen
c0abefd30b ARM: imx: Add core definitions for MX53
Add iomux, clocks,  and memory map for Freescale's MX53 SoC.
Add cpu_is_mx53 function to common.h.
Add 3 more banks of gpio's to mxc_gpio_ports.
Add MX53 phys offset address.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24 10:09:04 +01:00
Uwe Kleine-König
08ff97b521 ARM: imx: use MXxy_IO_P2V macros to setup static mappings
This makes less code rely on the virtual constants.

To further simplify code and reduce the needed boilerplate when
defining the static mappings a new helper macro is defined in
mach/hardware.h.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-11-17 08:58:09 +01:00
Jason Wang
84659ab585 imx: move gpio init after to irq init
The commit 9a763bf "get rid of mxc_gpio_init" changed gpio_init
and irq_init sequence. Usually we will call set_irq_chained_handler
in gpio_init functions, this should be called after the irq_init
called, otherwise the chained irq can't get propoer irq_chip and this
irq will remain masked even we called set_irq_chained_handler.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26 15:05:35 +02:00
Uwe Kleine-König
9a763bfbe4 ARM: imx: get rid of mxc_gpio_init
This function is defined once for each imx family and so is in the way
when compiling a kernel for more than one SoC.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-24 15:40:40 +02:00
Sascha Hauer
fc300206ad i.MX51: remove NFC AXI static mapping
This area contains the Nand Flash controller registers. There
is no need to map them statically as the Nand driver uses ioremap().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:18:27 +01:00
Sascha Hauer
3d1bc8626c i.MX51: map TZIC dynamically
This looks cleaner and allows us to call mx51_revision
later when we can use ioremap to determine the silicon
revision dynamically.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:05:40 +01:00
Amit Kucheria
a329b48c43 mxc: Core support for Freescale i.MX5 series
Add basic clock support, cpu identification, I/O mapping, interrupt
controller, serial port and ethernet.

Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-09 18:32:16 +02:00