Commit Graph

6 Commits

Author SHA1 Message Date
Helmut Schaa
8de394f602 ath5k: remove obsolete declaration of struct ieee80211_hw_mode
Signed-off-by: Helmut Schaa <hschaa@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01 15:31:33 -04:00
Bruno Randolf
b47f407bef ath5k: move rx and tx status structures out of hardware descriptor
move ath5k_tx_status and ath5k_rx_status structures out of the hardware
descriptor since they are not accessed by the hardware at all. they just
contain converted information from the hardware descriptor. since they are only
used in the rx and tx tasklets there is also no use to keep them for each
descriptor.

drivers/net/wireless/ath5k/ath5k.h:     Changes-licensed-under: ISC
drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/debug.c:     Changes-licensed-under: GPL
drivers/net/wireless/ath5k/debug.h:     Changes-licensed-under: GPL
drivers/net/wireless/ath5k/hw.c:        Changes-licensed-under: ISC

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-07 16:07:49 -05:00
Jiri Slaby
6cd74e3b99 WDEV: ath5k, typecheck on nonDEBUG
At least type check the ATH5K_TRACE paramter on !ATH5K_DEBUG configs.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Acked-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29 15:37:11 -05:00
Luis R. Rodriguez
b446197cc1 ath5k: Port debug.c over to the new band API and enable as build option
This patch finishes the port and enables debug as an build option.
This was tested on:

Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
RF5112A multiband radio found (0x36)

Note:

For 2 GHz band on the above card I noticed we get negative channel
numbers. Will look into this unless someone beats me to it.

Example out put when loading using:

sudo modprobe ath5k debug=0x00000400

 Band 2 GHz: channels 26, rates 12
  channels:
     1 2412 00c0 0000
     2 2417 00c0 0000
     3 2422 00c0 0000
     4 2427 00c0 0000
     5 2432 00c0 0000
     6 2437 00c0 0000
     7 2442 00c0 0000
     8 2447 00c0 0000
     9 2452 00c0 0000
    10 2457 00c0 0000
    11 2462 00c0 0000
    12 2467 00c0 0000
    13 2472 00c0 0000
    14 2484 00c0 0000
   -498 2512 00c0 0000
   -494 2532 00c0 0000
   -490 2552 00c0 0000
   -486 2572 00c0 0000
   -482 2592 00c0 0000
   -478 2612 00c0 0000
   -474 2632 00c0 0000
   -470 2652 00c0 0000
   -466 2672 00c0 0000
   -462 2692 00c0 0000
   -458 2712 00c0 0000
   -454 2732 00c0 0000
 Band 5 GHz: channels 194, rates 8
  channels:
    27 5135 0140 0000
    28 5140 0140 0000
[... etc ]
   219 6095 0140 0000
   220 6100 0140 0000
  rates:
     60 000b 0000 0000
     90 000f 0000 0000
    120 000a 0000 0000
    180 000e 0000 0000
    240 0009 0000 0000
    360 000d 0000 0000
    480 0008 0000 0000
    540 000c 0000 0000

Changes to base.c, base.h
Changes-licensed-under: 3-Clause-BSD

Changes to debug.c, debug.h
Changes-licensed-under: GPL

Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-29 15:19:37 -05:00
Bruno Randolf
be9b72590c ath5k: debug level improvements
* use only one debug level for beacon debugging: unify ATH5K_DEBUG_BEACON and
ATH5K_DEBUG_BEACON_PROC.

* remove debug level ATH5K_DEBUG_FATAL. doesn't make sense as a debug level -
if it's fatal it should be logged as an error.

* fancier printing of debug levels. cat /debugfs/ath5k/phy0/debug.

* allow debug levels to be changed by echoing their name into
/debugfs/ath5k/phy0/debug. this will toggle the state, when it was off it will
be turned on and vice versa.

* use copy_from_user() when reading from the debug files. use unsigned int for
better optimization. reduce buffer sizes on stack.

drivers/net/wireless/ath5k/base.c:      Changes-licensed-under: 3-Clause-BSD
drivers/net/wireless/ath5k/debug.c:     Changes-licensed-under: GPL
drivers/net/wireless/ath5k/debug.h:     Changes-licensed-under: GPL

Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Acked-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:26:35 -08:00
Jiri Slaby
fa1c114fda [PATCH] Net: add ath5k wireless driver
add ath5k wireless driver

Portions of this driver are covered by one or both of the ISC and
3-clause BSD licenses.  Specific license information is cited at the top
of each file.

Acked-by and Signed-off-by information is collected from individual
patches as collected in the wireless-2.6 tree prior to upstream
submission.

Acked-by: Matthew W. S. Bell  <mentor@madwifi.org>
Acked-by: Michael Taylor <mike.taylor@apprion.com>
Acked-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bradley M. Kuhn <bkuhn@softwarefreedom.org>
Signed-off-by: Bruno Randolf <bruno@thinktube.com>
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Francesco Gringoli <francesco.gringoli@ing.unibs.it>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Karen Sandler <karen@softwarefreedom.org>
Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: Matt Norwood <norwood@softwarefreedom.org>
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: Richard Fontana <fontana@softwarefreedom.org>
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Ulrich Meis <meis@nets.rwth-aachen.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:35 -08:00