Commit Graph

184 Commits

Author SHA1 Message Date
amit salecha
b11a25aaec qlcnic: change module parameter permissions
o Updating module parameter after driver load is not supported
  except auto_fw_reset parameter. Changing these parameter after
  driver load, can have weird result.

o Update driver version to 5.0.15.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10 13:34:55 -08:00
Sony Chacko
13b93ed924 qlcnic: fix ethtool diagnostics test
IRQ diag test was getting executed only when both register test
and link test passed. The test should get executed if ETH_TEST_FL_OFFLINE
flag is set.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10 13:34:54 -08:00
amit salecha
0e5f20b656 qlcnic: fix flash fw version read
Driver is reading flash fw version from defined address, this address
may be invalid. Indeed Driver should read address for fw version through
flash layout table. Flash layout table has defined region and address for
fw version address should be read from fw image region.

Driver has check for old firmware, this bug can cause driver load fail.
This patch will try to read fw version from flash image region, if that fails,
read from defined address.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-10 13:34:54 -08:00
Joe Perches
215faf9c5f drivers/net/*/: Use static const
Using static const generally increases object text and decreases data size.
It also generally decreases overall object size.

Signed-off-by: Joe Perches <joe@perches.com>
2010-12-21 02:16:10 -08:00
Rajesh Borundia
1dc0f3c54c qlcnic: reset pci function unconditionally during probe
Some boot code drivers dont have cleanup routine, so pci function
remains in unknown state prior to driver load. So during driver load
issue FLR unconditionally.

Update driver version to 5.0.14.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:39:02 -08:00
Rajesh Borundia
b5006dcb10 qlcnic: fix ocm window register offset calculation
OCM window register offset was calculated incorrectly for
pci function greater than zero.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:39:01 -08:00
Sucheta Chakraborty
c75822a309 qlcnic: fix LED test when interface is down.
When interface is down, create temporary context to config LED.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17 11:39:01 -08:00
Anirban Chakraborty
e4d849b811 qlcnic: Updated driver version to 5.0.13
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03 09:33:22 -08:00
Sritej Velaga
40839129f7 qlcnic: LICENSE file for qlcnic
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03 09:33:21 -08:00
Amit Kumar Salecha
091056b2ad qlcnic: validate eswitch config values for PF
Currently driver set default eswitch configuration values for PF function,
instead of validating values sent by application.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03 09:33:21 -08:00
Sucheta Chakraborty
97319a270d qlcnic: Disable loopback support
Loopback mode can not be supported in CNA mode. Removing it until FW is fixed.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-03 09:33:20 -08:00
Joe Perches
f316746014 qlcnic: remove unnecessary [kv][mcz]alloc casts
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 17:26:23 -08:00
Rajesh Borundia
b0044bcfa9 qlcnic: avoid using reset_devices as it may become obsolete.
In kdump environment do not depend upon reset_devices parameter
to reset the pci function as this parameter may become obsolete.
Instead use an adapter specific mechanism to determine if the pci
function needs to be reset.

Per function refcount is maintained in driver, which is set in probe
and reset in remove handler of adapter. If the probe detects the count
as non zero then reset the function.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28 10:47:16 -08:00
Eric Dumazet
89bf67f1f0 drivers/net: use vzalloc()
Use vzalloc() and vzalloc_node() in net drivers

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-27 22:53:38 -08:00
Anirban Chakraborty
802aa9c058 qlcnic: Bumped up driver version to 5.0.12
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 11:49:26 -08:00
Sony Chacko
706f23ada6 qlcnic: lro off message log from set rx checsum
Log LRO off message while disabling rx checksum only when
LRO is already enabled.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 11:49:26 -08:00
Sritej Velaga
2679a135e6 qlcnic: Add description for CN1000Q adapter
Add description for CN1000Q adapter

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 11:49:25 -08:00
Rajesh Borundia
c21fd48c22 qlcnic: Fix for kdump
In case of kdump environment the function may be in unknown state.
Reset the function using PCI FLR before initializing it.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 11:49:25 -08:00
Sucheta Chakraborty
2abea2f0a5 qlcnic: Allow minimum bandwidth of zero
Allow minimum bandwidth to be set zero

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-17 11:49:24 -08:00
Eric Dumazet
636f8c6f68 qlcnic: fix panic on load
Its now illegal to call netif_stop_queue() before register_netdev()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-31 09:32:55 -07:00
Sony Chacko
0184bbba1c qlcnic: define valid vlan id range
4095 vlan id is reserved and should not be use.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 12:21:54 -07:00
Sony Chacko
90d1900555 qlcnic: reduce rx ring size
If eswitch is enabled, rcv ring size can be reduce, as
physical port is partition-ed.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 12:21:54 -07:00
amit salecha
e5edb7b19f qlcnic: fix mac learning
In failover bonding case, same mac address can be programmed on other slave function.
Fw will delete old entry (original func) associated with that mac address.
Need to reporgram mac address, if failover again happen to original function.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 12:21:53 -07:00
Jesse Gross
b738127dfb vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs.
Since vlan groups will soon be more of an implementation detail
for vlan devices, rename the constant to be descriptive of its
actual purpose.

Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 01:26:50 -07:00
amit salecha
3666e0b04f qlcnic: update ethtool stats
Added statistics for Nic Partition supported adapter.
These statistics are maintined in device.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18 07:22:50 -07:00
Amit Kumar Salecha
b1091fea29 qlcnic: update driver version 5.0.11
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08 13:59:11 -07:00
Sritej Velaga
ff1b1bf867 qlcnic: change all P3 references to P3P
This patch just rename all P3 #define to P3P.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08 13:59:11 -07:00
Rajesh Borundia
ee07c1a701 qlcnic: fix promiscous mode for VF
o Allow promiscous mode setting for VF's depending upon the configuration.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08 13:59:10 -07:00
Sritej Velaga
6336acd552 qlcnic: fix board description
Remove "Flex-10" from board description.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08 13:59:09 -07:00
Amit Kumar Salecha
a2152d096e qlcnic: remove private LRO flag
LRO was not getting enable after interface down/up.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08 13:59:09 -07:00
Amit Kumar Salecha
b8c1762045 qlcnic: support quiescent mode
Put device in quiescent mode during internal loopback test.
Before running test, set state to NEED_QUISCENT. After getting
ack from all function, change state to QUISCENT and perform test.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08 13:59:08 -07:00
Amit Kumar Salecha
f7ec804a3e qlcnic: driver private workqueue
Currently fw recovery usage global workqueue.
As same workqueue used by kernel for ethtool and etc., supporting
quiescent mode is not possible, without driver private workqueue.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-08 13:59:08 -07:00
stephen hemminger
debf279a81 qlcnic: remove dead code
This driver has several pieces of dead code (found by running
make namespacecheck). This patch removes them.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 00:47:37 -07:00
Sritej Velaga
0bd9e6a964 qlcnic: set mtu lower limit
Setting mtu < 68 is not supported.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:52 -07:00
Sritej Velaga
aef3d89827 qlcnic: cleanup port mode setting
Port mode setting is not required for Qlogic CNA adapters.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:51 -07:00
Sucheta Chakraborty
a1c0c45991 qlcnic: sparse warning fixes
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:51 -07:00
Sucheta Chakraborty
7e56cac4b6 qlcnic: fix vlan TSO on big endian machine
o desc->vlan_tci is in __le16 format. Doing htons and
  cpu_to_le64 again on vlan_tci, result in invalid value on ppc.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:50 -07:00
Sucheta Chakraborty
b501595cbb qlcnic: fix endianess for lro
ipaddress in ifa->ifa_address field are in big endian format.
Also device requires ip address in big endian only.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:50 -07:00
Amit Kumar Salecha
c265eb6ecb qlcnic: fix diag register
regs_buff[i] and diag_registers[j] array should use different index
variable.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:49 -07:00
Amit Kumar Salecha
ef1828058b qlcnic: fix eswitch stats
Some of the counters are not implemented in fw.
Fw return NOT AVAILABLE VALUE as (0xffffffffffffffff).
Adding these counters, result in invalid value.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:49 -07:00
Amit Kumar Salecha
31dee692e2 qlcnic: fix internal loopback test
o Loop 10 times with delay of 1 ms to rcv packet.
o Print garbage packet.
o Try send/receive MAX(16) packet, instead of exit from test,
  if a packet is not received.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:48 -07:00
David S. Miller
e40051d134 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/qlcnic/qlcnic_init.c
	net/ipv4/ip_output.c
2010-09-27 01:03:03 -07:00
Eric Dumazet
807540baae drivers/net: return operator cleanup
Change "return (EXPR);" to "return EXPR;"

return is not a function, parentheses are not required.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26 18:34:29 -07:00
Eric Dumazet
8df8fd2712 qlcnic: dont set skb->truesize
skb->truesize is set in core network.

Dont change it unless dealing with fragments.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 13:03:24 -07:00
Eric Dumazet
daebbca3ab qlcnic: dont set skb->truesize
skb->truesize is set in core network.

Dont change it unless dealing with fragments.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-20 10:10:09 -07:00
Eric Dumazet
04746ff128 qlcnic: dont assume NET_IP_ALIGN is 2
qlcnic driver allocates rx skbs and gives to hardware too bytes of extra
storage, allowing for corruption of kernel data.

NET_IP_ALIGN being 0 on some platforms (including x86), drivers should
not assume it's 2.

rds_ring->skb_size = rds_ring->dma_size + NET_IP_ALIGN;
...
skb = dev_alloc_skb(rds_ring->skb_size);
skb_reserve(skb, 2);
pci_map_single(pdev, skb->data, rds_ring->dma_size, PCI_DMA_FROMDEVICE);

(and rds_ring->skb_size == rds_ring->dma_size) -> bug


Because of extra alignment (1500 + 32) -> four extra bytes are available
before the struct skb_shared_info, so corruption is not noticed.

Note: this driver could use netdev_alloc_skb_ip_align()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 22:58:08 -07:00
Amit Kumar Salecha
457e9d2233 qlcnic: update version 5.0.10
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 11:30:55 -07:00
Amit Kumar Salecha
97f29d8236 qlcnic: remove fw version check
Don't compare flash and file fw version. Allow to load
old fw from file than flashed fw.
If file fw is present, don't skip fw re-intialization.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 11:30:55 -07:00
Amit Kumar Salecha
aec1e8452d qlcnic: vlan lro support
LRO + GRO + vlan rx accleration support, performance increases
around 20% and cpu utilization reduces around 70% on vlan interface.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 11:30:54 -07:00
Amit Kumar Salecha
5718d3b432 qlcnic: vlan gro support
GRO support + vlan rx accleration, boost around 9%
performance and reduces 25% of cpu utilization on vlan
interface.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 11:29:33 -07:00