Commit Graph

9 Commits

Author SHA1 Message Date
Anatolij Gustschin
c3e2aa8610 spi: spi-mpc512x-psc: let transmiter/receiver enabled when in xfer loop
There is no need to disable transmitter/receiver after each loop
iteration and re-enable it for next loop iteration. Enable the
transmitter/receiver before xfer loop starts and disable it when
the whole transfer is done.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-09 17:53:39 +01:00
Anatolij Gustschin
86e98743ec spi: spi-mpc512x-psc: add support for gpio chip selects
Currently the driver only uses one internal chip select.
Add support for gpio chip selects configured by cs-gpios
DT binding.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-09 17:53:19 +01:00
Anatolij Gustschin
1ad849aee5 spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts
Some SPI slave devices require asserted chip select signal across
multiple transfer segments of an SPI message. Currently the driver
always de-asserts the internal SS signal for every single transfer
segment of the message and ignores the 'cs_change' flag of the
transfer description. Disable the internal chip select (SS) only
if this is needed and indicated by the 'cs_change' flag.

Without this change, each partial transfer of a surrounding
multi-part SPI transaction might erroneously change the SS
signal, which might prevent slaves from answering the request
that was sent in a previous transfer segment because the
transaction could be considered aborted (SS was de-asserted
before reading the response).

Reported-by: Gerhard Sittig <gerhard.sittig@ifm.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2013-04-01 14:30:26 +01:00
Anatolij Gustschin
c88dd349b5 spi/spi-mpc512x-psc: init mode bits supported by the driver
The driver should setup mode bits it supports, otherwise
adding an SPI device might fail even if the driver supports
the requested SPI mode.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 14:44:12 +00:00
Anatolij Gustschin
9d15a3bac3 spi/mpc512x-psc: don't use obsolet cell-index property
Remove deprecated cell-index property and use spi alias to
obtain the SPI PSC number used for SPI bus id.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-02-05 14:44:12 +00:00
Grant Likely
fd4a319bc9 spi: Remove HOTPLUG section attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Bill Pemberton has done most of the legwork on this series. I've used
his script to purge the attributes from the drivers/gpio tree.

Reported-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-12-07 17:06:43 +00:00
Guenter Roeck
2187921365 spi/mpc512x-psc: Avoid access to freed memory in device remove function
The call to spi_unregister_master() in the device remove function frees device
memory, and with it any device local data. However, device local data is still
accessed after the call to spi_unregister_master().

Acquire a reference to the SPI master device and release it after cleanup is
complete to solve the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-22 19:26:36 +01:00
Grant Likely
940ab88962 drivercore: Add helper macro for platform_driver boilerplate
For simple modules that contain a single platform_driver without any
additional setup code then ends up being a block of duplicated
boilerplate.  This patch adds a new macro, module_platform_driver(),
which replaces the module_init()/module_exit() registrations with
template functions.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: Magnus Damm <magnus.damm@gmail.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2011-10-25 00:35:47 +02:00
Grant Likely
ca632f5566 spi: reorganize drivers
Sort the SPI makefile and enforce the naming convention spi_*.c for
spi drivers.

This change also rolls the contents of atmel_spi.h into the .c file
since there is only one user of that particular include file.

v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be
      be the predominant pattern for subsystem prefixes.
    - Clean up filenames in Kconfig and header comment blocks

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2011-06-06 01:16:30 -06:00