Commit Graph

702 Commits

Author SHA1 Message Date
Vitaly Bordug
796bcae736 USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]
A published errata for ppc440epx states, that when running Linux with
both EHCI and OHCI modules loaded, the EHCI module experiences a fatal
error when a high-speed device is connected to the USB2.0, and
functions normally if OHCI module is not loaded.

There used to be recommendation to use only hi-speed or full-speed
devices with specific conditions, when respective module was unloaded.
Later, it was observed that ohci suspend is enough to keep things
going, and it was turned into workaround, as explained below.

Quote from original descriprion:

The 440EPx USB 2.0 Host controller is an EHCI compliant controller.  In
USB 2.0 Host controllers, each EHCI controller has one or more companion
controllers, which may be OHCI or UHCI.  An USB 2.0 Host controller will
contain one or more ports.  For each port, only one of the controllers
is connected at any one time. In the 440EPx, there is only one OHCI
companion controller, and only one USB 2.0 Host port.
All ports on an USB 2.0 controller default to the companion
controller.  If you load only an ohci driver, it will have control of
the ports and any deviceplugged in will operate, although high speed
devices will be forced to operate at full speed.  When an ehci driver
is loaded, it explicitly takes control of the ports.  If there is a
device connected, and / or every time there is a new device connected,
the ehci driver determines if the device is high speed or not.  If it
is high speed, the driver retains control of the port.  If it is not,
the driver explicitly gives the companion controller control of the
port.

The is a software workaround that uses
Initial version of the software workaround was posted to
linux-usb-devel:

http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg54019.html

and later available from amcc.com:
http://www.amcc.com/Embedded/Downloads/download.html?cat=1&family=15&ins=2

The patch below is generally based on the latter, but reworked to
powerpc/of_device USB drivers, and uses a few devicetree inquiries to
get rid of (some) hardcoded defines.

Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 09:59:52 -08:00
Steven Noonan
d859bffc66 USB: EHCI pci-quirks.c: don't wait so long for BIOS handoff
Instead of waiting a painful 5000ms, quirk_usb_disable_ehci() now does a
1000ms loop to wait for the BIOS to acknowledge the handoff.

The five second delay is really quite irritating to have to deal with
every boot up, and I very seriously doubt any non-broken bios takes more
than a second to do the actual handoff.

Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 09:59:50 -08:00
Rodolfo Giometti
b92a78e582 usb host: Oxford OXU210HP HCD driver.
This driver implements the support for Oxford OXU210HP USB high-speed host,
no peripheral nor OTG.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: Kan Liu <kan.k.liu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 09:59:50 -08:00
Vikram Pandita
3a4e72cbf2 USB: Avoid 20ms delay in EHCI resume
For function ehci_bus_resume()
- Added flag resume_needed
  No need to wait for 20ms if no port was suspended

- Change mdelay to msleep

- release and reacquire the spinlock around mdelay

Signed-off-by: vikram pandita <vikram.pandita@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 09:59:50 -08:00
Arjan van de Ven
8e8ce4b642 USB: use pci_ioremap_bar() in drivers/usb
Use the newly introduced pci_ioremap_bar() function in drivers/usb.
pci_ioremap_bar() just takes a pci device and a bar number, with the goal
of making it really hard to get wrong, while also having a central place
to stick sanity checks.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 09:59:49 -08:00
roel kluin
e64a521929 USB: clean up redundant tests on unsigned
temp, bytes and param->{length,sglen,vary} are unsigned so
these tests do nothing.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 09:59:49 -08:00
David Vrabel
a5e6ced58d wusb: timeout when waiting for ASL/PZL updates in whci-hcd
Timeout if an ASL or PZL update doesn't not complete and reset the
hardware.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2009-01-07 10:54:22 +00:00
David Vrabel
b21a207141 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream
Conflicts:

	drivers/uwb/wlp/eda.c
2009-01-02 13:17:13 +00:00
Linus Torvalds
14a3c4ab0e Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...
2008-12-30 17:36:49 -08:00
David Vrabel
bce83697c5 uwb: use dev_dbg() for debug messages
Instead of the home-grown d_fnstart(), d_fnend() and d_printf() macros,
use dev_dbg() or remove the message entirely.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-12-22 18:22:50 +00:00
Paul Mundt
d6435102d4 usb: Fix up sh_mobile usbf clock framework warnings.
drivers/usb/gadget/m66592-udc.c: In function 'm66592_probe':
drivers/usb/gadget/m66592-udc.c:1672: warning: label 'clean_up2' defined but not used
drivers/usb/host/r8a66597-hcd.c: In function 'r8a66597_probe':
drivers/usb/host/r8a66597-hcd.c:2401: warning: label 'clean_up2' defined but not used

Added by commit 985fc7c81c7852f2e104c71cbe913ace683c9e6a ("sh: sh_mobile
usbf clock framework support").

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:52 +09:00
Magnus Damm
765786e0ae sh: sh_mobile usb clock framework support
Add clock framework support to the usb/r8a66597 driver and
adjust the cpu specific code accordingly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:51 +09:00
Russell King
7e1548a597 Merge branch 'omap3-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel 2008-12-15 22:13:26 +00:00
Russell King
72aaf09fda Merge git://git.marvell.com/orion into devel 2008-12-13 09:12:51 +00:00
Jarkko Nikula
944e1bffb6 ARM: OMAP: Switch ohci-omap to gpio_request/free calls
Switch to gpio_request/free calls

Cc: linux-usb@vger.kernel.org
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10 17:35:31 -08:00
David Brownell
40e3925ba1 ARM: OMAP: switch to gpio_direction_input
More switchover to the cross-platform GPIO interface:
use gpio_direction_input(), not an OMAP-specific call.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10 17:35:26 -08:00
David Vrabel
c35fa3ea1a Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream 2008-12-08 16:18:47 +00:00
Ronen Shitrit
fb6f552930 [ARM] Orion: add the option to support different ehci phy initialization
The Orion ehci driver serves the Orion, kirkwood and DD Soc families.
Since each of those integrate a different USB phy we should have the
ability to use few initialization sequences or to leave the boot loader
phy settings as is.

Signed-off-by: Ronen Shitrit <rshitrit@marvell.com>
2008-12-04 01:28:14 -05:00
Shane Huang
0a99e8ac43 USB: fix SB600 USB subsystem hang bug
This patch is required for all AMD SB600 revisions to avoid USB subsystem hang
symptom. The USB subsystem hang symptom is observed when the system has
multiple USB devices connected to it. In some cases a USB hub may be required
to observe this symptom.

Reported in bugzilla as #11599, the similar patch for SB700 old revision is:
commit b09bc6cbae

Reported-by: raffaele <ralfconn@tele2.it>
Tested-by: Roman Mamedov <roman@rm.pp.ru>
Signed-off-by: Shane Huang <shane.huang@amd.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-30 22:24:02 -08:00
Greg Kroah-Hartman
269f053233 Revert "USB: improve ehci_watchdog's side effect in CPU power management"
This reverts commit f0d781d59c.

It was the wrong thing to do, and does not really do what it said
it did.

Cc: Yi Yang <yi.y.yang@intel.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-30 22:24:02 -08:00
Russell King
e0d8b13ae1 [ARM] pxa: don't pass a consumer clock name for devices with unique clocks
Where devices only have one consumer, passing a consumer clock ID
has no real benefit.  Remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 12:38:23 +00:00
David Vrabel
dcc7461eef wusb: add debug files for ASL, PZL and DI to the whci-hcd driver
Add asl, pzl and di debugfs files to uwb/uwbN/wusbhc for WHCI host
controller.  These dump the current ASL, PZL and DI buffer.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-11-26 13:36:59 +00:00
David Vrabel
56968d0c1a wusb: whci-hcd shouldn't do ASL/PZL updates while channel is inactive
ASL/PZL updates while the WUSB channel is inactive (i.e., the PZL and
ASL are stopped) may not complete.  This causes hangs when removing the
whci-hcd module if a device is still connected (removing the device
does an endpoint_disable which results in an ASL update to remove the
qset).

If the WUSB channel is inactive the update can simply be skipped as the
WHC doesn't care about the state of the ASL/PZL.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-11-25 14:23:40 +00:00
David Vrabel
65d76f3682 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream 2008-11-25 13:52:56 +00:00
Andiry Xu
b09bc6cbae USB: fix SB700 usb subsystem hang bug
This patch is required for AMD SB700 south bridge revision A12 and A13 to avoid
USB subsystem hang symptom. The USB subsystem hang symptom is observed when the
system has multiple USB devices connected to it. In some cases a USB hub may be
required to observe this symptom.

This patch works around the problem by correcting the internal register setting
that will help by changing the behavior of the internal logic to avoid the
USB subsystem hang issue. The change in the behavior of the logic does not
impact the normal operation of the USB subsystem.

Reported-by: Volker Armin Hemmann <volker.armin.hemmann@tu-clausthal.de>
Tested-by: Volker Armin Hemmann <volker.armin.hemmann@tu-clausthal.de>
Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Libin Yang <libin.yang@amd.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-19 22:01:34 -08:00
David Vrabel
dba0a91872 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream 2008-11-19 14:48:07 +00:00
David Vrabel
6fae35f9ce uwb: add basic radio manager
The UWB radio manager coordinates the use of the radio between the
PALs that may be using it.  PALs request use of the radio with
uwb_radio_start() and the radio manager will start beaconing if its
not already doing so.  When the last PAL has called uwb_radio_stop()
beaconing will be stopped.

In the future, the radio manager will have a more sophisticated channel
selection algorithm, probably following the Channel Selection Policy
from the WiMedia Alliance when it is finalized.  For now, channel 9
(BG1, TFC1) is selected.

The user may override the channel selected by the radio manager and may
force the radio to stop beaconing.

The WUSB Host Controller PAL makes use of this and there are two new
debug PAL commands that can be used for testing.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-11-19 14:46:33 +00:00
Alan Stern
372dd6e8ed USB: EHCI: fix divide-by-zero bug
This patch (as1164) fixes a bug in the EHCI scheduler.  The interval
value it uses is already in linear format, not logarithmically coded.
The existing code can sometimes crash the system by trying to divide
by zero.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13 14:45:06 -08:00
Alan Stern
67b2e02974 USB: EHCI: fix handling of dead controllers
This patch (as1165) makes a few small changes in the logic used by
ehci-hcd when it encounters a controller error:

	Instead of printing out the masked status, it prints the
	original status as read directly from the hardware.

	It doesn't check for the STS_HALT status bit before taking
	action.  The mere fact that the STS_FATAL bit is set means
	that something bad has happened and the controller needs to
	be reset.  With the old code this test could never succeed
	because the STS_HALT bit was masked out from the status.

I anticipate that this will prevent the occasional "irq X: nobody cared"
problem people encounter when their EHCI controllers die.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13 14:45:05 -08:00
Yoshihiro Shimoda
5863964608 usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB
When I used SuperH on-chip USB, there was the problem that accessed
r8a66597_root_hub which was not allocated.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13 14:45:04 -08:00
Sebastian Andrzej Siewior
ff30bf1ca4 USB: remove optional bus bindings in isp1760, fixing runtime warning
Roland Reported the following:
| kmem_cache_create: duplicate cache isp1760_qtd
| Pid: 461, comm: modprobe Tainted: G        W  2.6.28-rc2-git3-default #4
| Call Trace:
|  [<c017540e>] kmem_cache_create+0xc9/0x3a3
|  [<c0159a8d>] free_pages_bulk+0x16c/0x1c9
|  [<f165c05f>] isp1760_init+0x0/0xb [isp1760]
|  [<f165c018>] init_kmem_once+0x18/0x5f [isp1760]
|  [<f165c064>] isp1760_init+0x5/0xb [isp1760]
|  [<c010113d>] _stext+0x4d/0x148
|  [<c0142936>] load_module+0x12cd/0x142e
|  [<c01743c4>] kmem_cache_destroy+0x0/0xd7
|  [<c0142b1e>] sys_init_module+0x87/0x176
|  [<c01039eb>] sysenter_do_call+0x12/0x2f

The reason, is that ret is initialized with ENODEV instead of 0 _or_
the kmem cache is not freed in error case with no bus binding.

The difference between OF+PCI and OF only is
| 15148     804      32   15984    3e70 isp1760-of-pci.o
| 13748     676       8   14432    3860 isp1760-of.o

about 1.5 KiB.

Until there is a checkbox where the user *must* select atleast one item,
and may select multiple entries I don't make it selectable anymore.
Having a driver which can't be used under any circumstances is broken
anyway and I've seen distros shipping it that way.

Reported-by: Roland Kletzing <devzero@web.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>a
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13 14:45:03 -08:00
Geoff Levand
ddcb01ff9b USB: Fix PS3 USB shutdown problems
Add ehci_shutdown() or ohci_shutdown() calls to the USB
PS3 bus glue.  ehci_shutdown() and ohci_shutdown() do some
controller specific cleanups not done by usb_remove_hcd().

Fixes errors on shutdown or reboot similar to these:

  ps3-ehci-driver sb_07: HC died; cleaning up
  irq 51: nobody cared (try booting with the "irqpoll" option)

Related bugzilla reports:

  http://bugzilla.kernel.org/show_bug.cgi?id=11819
  http://bugzilla.terrasoftsolutions.com/show_bug.cgi?id=317

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13 14:45:02 -08:00
Huang Weiyi
f88518d122 wusb: remove unused #include <version.h>
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/usb/host/hwa-hc.c
  drivers/usb/host/whci/hcd.c
  drivers/usb/host/whci/int.c
  drivers/usb/host/whci/wusb.c
  drivers/usb/wusbcore/cbaf.c

This patch removes the said #include <version.h>.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-31 15:10:27 +00:00
David Vrabel
4d2bea4ca0 wusb: do a proper channel stop
When stopping the WUSB channel the host should send Channel Stop IEs giving
the WUSB Channel Time of the last MMC.  Both WHCI and HWA hosts provide a
channel stop command for this.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-28 12:08:46 +00:00
David Vrabel
b09ac64b7b wusb: release mutex in the error path of whci-hcd's whc_do_gencmd()
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-28 12:06:59 +00:00
Linus Torvalds
a27028349c Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: don't rebind drivers after failed resume or reset
  USB: fix memory leak in cdc-acm
  USB: Unusual dev for Mio moov 330 gps
  USB: cdc-wdm: make module autoload work
  USB: Fix unneeded endpoint check in pxa27x_udc
  usb/gadget: fix kernel-doc warning
  USB: Speedtouch: add pre_reset and post_reset routines
  USB: usbtest.c: length, sglen and vary are unsigned, so cannot be negative
  USB: support Huawei data card product IDs
  USB: add ZTE MF626 USB GSM modem entry
  USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA bridge
  USB: Fix debugfs_create_file's error checking method for usb/gadget/s3c2410_udc
  USB: ohci: add support for tmio-ohci cell
2008-10-23 10:09:50 -07:00
Linus Torvalds
9779a8325a Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (47 commits)
  uwb: wrong sizeof argument in mac address compare
  uwb: don't use printk_ratelimit() so often
  uwb: use kcalloc where appropriate
  uwb: use time_after() when purging stale beacons
  uwb: add credits for the original developers of the UWB/WUSB/WLP subsystems
  uwb: add entries in the MAINTAINERS file
  uwb: depend on EXPERIMENTAL
  wusb: wusb-cbaf (CBA driver) sysfs ABI simplification
  uwb: document UWB and WUSB sysfs files
  uwb: add symlinks in sysfs between radio controllers and PALs
  uwb: dont tranmit identification IEs
  uwb: i1480/GUWA100U: fix firmware download issues
  uwb: i1480: remove MAC/PHY information checking function
  uwb: add Intel i1480 HWA to the UWB RC quirk table
  uwb: disable command/event filtering for D-Link DUB-1210
  uwb: initialize the debug sub-system
  uwb: Fix handling IEs with empty IE data in uwb_est_get_size()
  wusb: fix bmRequestType for Abort RPipe request
  wusb: fix error path for wusb_set_dev_addr()
  wusb: add HWA host controller driver
  ...
2008-10-23 08:20:34 -07:00
Dmitry Baryshkov
78c73414f4 USB: ohci: add support for tmio-ohci cell
Some Toshiba Mobile I/O chips have OHCI controller built in.
E.g. the tc6393xb chip found in several Toshiba e-Series PDAs
and in Sharp Zaurus SL-6000 PDA. This adds platform glue
to support OHCI function of the chip.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Ian Molton <spyro@f2s.com>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22 10:05:27 -07:00
Linus Torvalds
a9b6148d25 USB: Fix unused label warnings in drivers/usb/host/ehci-hcd.c
This gets rid of an annoying warning in ehci-hcd.c when DEBUG isn't
enabled:

    warning: label 'err_debug' defined but not used

by moving it inside the already-existing #ifdef DEBUG, so that it
matches the goto.  And now my regular build is warning-free again.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 14:23:29 -07:00
David Vrabel
61e0e79ee3 Merge branch 'master' into for-upstream
Conflicts:

	Documentation/ABI/testing/sysfs-bus-usb
	drivers/Makefile
2008-10-20 16:07:19 +01:00
Greg Kroah-Hartman
802f389a2c USB: remove err() macro from more usb drivers
USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:14 -07:00
Greg Kroah-Hartman
5909f6ea2b USB: remove info() macro from remaining usb drivers
USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.  In the
few places that will not work out, use a basic printk().

Clean up the remaining usages of this in the drivers/usb/ directory.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:09 -07:00
Alan Stern
71b7497c07 USB: OHCI: fix endless polling behavior
This patch (as1149) fixes an obscure problem in OHCI polling.  In the
current code, if the RHSC interrupt status flag turns on at a time
when RHSC interrupts are disabled, it will remain on forever:

	The interrupt handler is the only place where RHSC status
	gets turned back off;

	The interrupt handler won't turn RHSC status off because it
	doesn't turn off status flags if the corresponding interrupt
	isn't enabled;

	RHSC interrupts will never get enabled because
	ohci_root_hub_state_changes() doesn't reenable RHSC if RHSC
	status is on!

As a result we will continue polling indefinitely instead of reverting
to interrupt-driven operation, and the root hub will not autosuspend.
This particular sequence of events is not at all unusual; in fact
plugging a USB device into an OHCI controller will usually cause it to
occur.

Of course, this is a bug.  The proper thing to do is to turn off RHSC
status just before reading the actual port status values.  That way
either a port status change will be detected (if it occurs before the
status read) or it will turn RHSC back on.  Possibly both, but that
won't hurt anything.

We can still check for systems in which RHSC is totally broken, by
re-reading RHSC after clearing it and before reading the port
statuses.  (This re-read has to be done anyway, to post the earlier
write.)  If RHSC is on but no port-change statuses are set, then we
know that RHSC is broken and we can avoid re-enabling it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:04 -07:00
Alan Stern
eafe5b99f2 USB: EHCI: fix remote-wakeup support for ARC/TDI core
This patch (as1147) fixes the remote-wakeup support for EHCI
controllers using the ARC/TDI "embedded-TT" core.  These controllers
turn off the RESUME bit by themselves when a port resume is complete;
hence we need to keep separate track of which ports are suspended or
in the process of resuming.

The patch also makes a couple of small improvements in ehci_irq(),
replacing reads of the command register with the value already stored
in a local variable.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Thomas Reitmayr <treitmayr@devbase.at>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:03 -07:00
Alan Stern
9beeee6584 USB: EHCI: log a warning if ehci-hcd is not loaded first
This patch (as1139) adds a warning to the system log whenever ehci-hcd
is loaded after ohci-hcd or uhci-hcd.  Nowadays most distributions are
pretty good about not doing this; maybe the warning will help convince
anyone still doing it wrong.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>  [2.6.27]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:03 -07:00
Alan Stern
2b70f07343 USB: EHCI, OHCI, UHCI: remove version numbers
This patch (as1145) removes the essentially useless driver-version
strings from ehci-hcd, ohci-hcd, and uhci-hcd.  It also unifies the
form of the banner lines they display upon loading and adds a missing
test for usb_disabled() to ehci-hcd.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:02 -07:00
Julien Brunel
ce5dee50ed USB: isp1760: Use an IS_ERR test rather than a NULL test
In case of error, the function isp1760_register returns an ERR
pointer, but never returns a NULL pointer. So after a call to this
function, a NULL test should be replaced by an IS_ERR test. Moreover,
we have noticed that:
(1) the result of isp1760_register is assigned through the function
pci_set_drvdata without an error test,
(2) if the call to isp1760_register fails, the current function
(isp1761_pci_probe) returns 0, and if it succeeds, it returns -ENOMEM,
which seems odd.

Thus, we suggest to move the test before the call to pci_set_drvdata
to correct (1), and to turn it into a non IS_ERR test to correct (2).

The semantic match that finds this problem is as follows: 
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@bad_null_test@
expression x,E;
statement S1, S2;
@@
x =  isp1760_register(...)
... when != x = E
* if (x == NULL)
S1 else S2
// </smpl>

Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:02 -07:00
Yi Yang
f0d781d59c USB: improve ehci_watchdog's side effect in CPU power management
ehci_watchdog will wake up CPU very frequently so that CPU
stays at C3 very short, average residence time is about 50
ms on Aspire One, but we expect it should be about 1 second
or more, so this kind of periodic timer is very bad for power
saving.

We can't remove this timer because of some bad USB controller
chipset, but at least we should reduce its side effect to as
possible as low.

This patch can make CPU stay at C3 longer, average residence time
is about twice as long as original. 

Please consider to apply it, thanks

Signed-off-by: Yi Yang <yi.y.yang@intel.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:02 -07:00
Alan Stern
e58dcebcd8 USB: UHCI: improve scheduling of interrupt URBs
This patch (as1140) adds a little intelligence to the interrupt-URB
scheduler in uhci-hcd.  Right now the scheduler is stupid; every URB
having the same period is assigned to the same slot.  Thus a large
group of period-N URBs can fill their slot and cause -ENOSPC errors
even when all the lower-period slots are empty.

With the patch, if an URB doesn't fit in its assigned slot then the
scheduler will try using lower-period slots.  This will provide
greater flexibility.  As an example, the driver will be able to handle
more than just three or four mice, which the current driver cannot.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:01 -07:00
Tony Lindgren
9b466c3b82 USB: ohci-omap: handle other omap15xx chips
Sync up USB parts of the ohci-omap support in mainline with the OMAP tree.
This patch supports another first generation OMAP1 part: not just the
OMAP 1510 (and its catalog version, the OMAP 5910), but also OMAP 310.

From: Tony Lindgren <tony@atomide.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:40:59 -07:00
Kumar Gala
cede969fe2 usb: remove code associated with !CONFIG_PPC_MERGE
Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore remove
the dead code associated with !CONFIG_PPC_MERGE.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:40:57 -07:00
Ming Lei
3c4bb71f96 USB: ehci-dbg: fix reading less content of periodic file
This patch fix 2 problems about reading periodic file:

1. The "..." after a interrupt qh is missed because buffer pointer is
   not moved.

2. After setting p.ptr as NULL, its next qh or itd will be omited and
   can't be stored in debug buffer.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:40:57 -07:00
Ming Lei
3c04e20ea9 USB: ehci-dbg: increase debug buffer size for periodic file
This patch is based on the following ideas:

1. Some usb devices (such as usb video class) have endpoints of high
   interval attribute, so reading "periodic" file need more debug buffer
   to accommodate the qh or itd schedule information.  For example, 4KB
   buffer is not enough for a single interrupt qh of 2ms period.

2. print a %p need 16 byte buffer on 64-bits arch, but 8 byte on 32-bits
   arch. Add a extra bonus for 64-bits arch.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:40:57 -07:00
Alan Stern
4a511bc3f5 OHCI: Allow broken controllers to auto-stop
This patch (as1134) attempts to improve the way we handle OHCI
controllers with broken Root Hub Status Change interrupt support.  In
these controllers the RHSC interrupt bit essentially never turns off,
making RHSC interrupts useless -- they have to remain permanently
disabled.

Such controllers should still be allowed to turn off their root hubs
when no devices are attached.  Polling for new connections can
continue while the root hub is suspended.  The patch implements this
feature.  (It won't have much effect unless CONFIG_PM is enabled and
CONFIG_USB_SUSPEND is disabled, but since the overhead is very small
we may as well do it.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:40:54 -07:00
Marc Zyngier
2714021937 USB: Let some USB host controllers get IRQ flags from resource
[This version fixes a thinko in the r8a66597 driver]

This patch let a few discrete USB host controllers drivers (isp116x-hcd,
r8a66597-hcd and sl811-hcd) obtain IRQ flags from their IORESOURCE_IRQ
resource if configured as such, much like it's been done for the smc91x
driver.

It spares people writing support for specific boards the burden to
configure the interrupt controller independantly, and keeps all IRQ
related information in a single resource.

HCD that are integrally part of a SoC have been left aside, as there
is probably no "wiring" options...

Tested on an Xscale PXA-255 based platform with isp116x-hcd.

Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:40:52 -07:00
Linus Torvalds
c813b4e16e Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits)
  UIO: Fix mapping of logical and virtual memory
  UIO: add automata sercos3 pci card support
  UIO: Change driver name of uio_pdrv
  UIO: Add alignment warnings for uio-mem
  Driver core: add bus_sort_breadthfirst() function
  NET: convert the phy_device file to use bus_find_device_by_name
  kobject: Cleanup kobject_rename and !CONFIG_SYSFS
  kobject: Fix kobject_rename and !CONFIG_SYSFS
  sysfs: Make dir and name args to sysfs_notify() const
  platform: add new device registration helper
  sysfs: use ilookup5() instead of ilookup5_nowait()
  PNP: create device attributes via default device attributes
  Driver core: make bus_find_device_by_name() more robust
  usb: turn dev_warn+WARN_ON combos into dev_WARN
  debug: use dev_WARN() rather than WARN_ON() in device_pm_add()
  debug: Introduce a dev_WARN() function
  sysfs: fix deadlock
  device model: Do a quickcheck for driver binding before doing an expensive check
  Driver core: Fix cleanup in device_create_vargs().
  Driver core: Clarify device cleanup.
  ...
2008-10-16 12:40:26 -07:00
Arjan van de Ven
5172046d96 usb: turn dev_warn+WARN_ON combos into dev_WARN
dev_WARN is both compacter and gives better debug information
than just a WARN_ON, since people and tools will copy the device
information message together with the WARN_ON in bug reports.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:50 -07:00
Russell King
2502991560 Merge branch 'fixes' into for-linus
Conflicts:

	arch/arm/mach-versatile/core.c
2008-10-15 23:16:07 +01:00
Russell King
7e69a8c4d0 Merge branch 's3c-move' into devel
Conflicts:

	arch/arm/mach-versatile/core.c
2008-10-14 22:24:51 +01:00
Russell King
b6825d2df5 Merge branch 'omap-all' into devel
Conflicts:

	arch/arm/mach-omap2/gpmc.c
	arch/arm/mach-omap2/irq.c
2008-10-14 22:24:42 +01:00
Linus Torvalds
2be4ff2f08 Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits)
  pcmcia: ioctl-internal definitions
  pcmcia: cistpl header cleanup
  pcmcia: remove unused argument to pcmcia_parse_tuple()
  pcmcia: card services header cleanup
  pcmcia: device_id header cleanup
  pcmcia: encapsulate ioaddr_t
  pcmcia: cleanup device driver header file
  pcmcia: cleanup socket services header file
  pcmcia: merge ds_internal.h into cs_internal.h
  pcmcia: cleanup cs_internal.h
  pcmcia: cs_internal.h is internal
  pcmcia: use dev_printk for cs_error()
  pcmcia: remove CS_ error codes alltogether
  pcmcia: deprecate CS_BAD_TUPLE
  pcmcia: deprecate CS_BAD_ARGS
  pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE
  pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE
  pcmcia: deprecate CS_NO_MORE_ITEMS
  pcmcia: deprecate CS_IN_USE
  pcmcia: deprecate CS_CONFIGURATION_LOCKED
  ...

Fix trivial conflict in drivers/pcmcia/ds.c manually
2008-10-13 14:12:40 -07:00
Ingo Molnar
8daf14cf56 Merge branches 'x86/xen', 'x86/build', 'x86/microcode', 'x86/mm-debug-v2', 'x86/memory-corruption-check', 'x86/early-printk', 'x86/xsave', 'x86/ptrace-v2', 'x86/quirks', 'x86/setup', 'x86/spinlocks' and 'x86/signal' into x86/core-v2 2008-10-12 15:50:02 +02:00
Linus Torvalds
7cc4e87f91 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits)
  [ARM] 5300/1: fixup spitz reset during boot
  [ARM] 5295/1: make ZONE_DMA optional
  [ARM] 5239/1: Palm Zire 72 power management support
  [ARM] 5298/1: Drop desc_handle_irq()
  [ARM] 5297/1: [KS8695] Fix two compile-time warnings
  [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
  [ARM] pxa: allow multi-machine PCMCIA builds
  [ARM] pxa: add preliminary CPUFREQ support for PXA3xx
  [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
  [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c
  [ARM] pxa/zylonite: add support for USB OHCI
  [ARM] ohci-pxa27x: use ioremap() and offset for register access
  [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
  [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource
  [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
  [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
  [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
  [ARM] pxa: simplify DMA register definitions
  [ARM] pxa: make additional DCSR bits valid for PXA3xx
  [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
  ...

Fixed up conflicts in
	arch/arm/mach-versatile/core.c
	sound/soc/pxa/pxa2xx-ac97.c
	sound/soc/pxa/pxa2xx-i2s.c
manually.
2008-10-11 10:09:45 -07:00
Vladimir Barinov
d6b52039c9 ALSA: Correct Vladimir Barinov's e-mail address
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10 13:41:45 +02:00
David Vrabel
99ee3a6d45 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb into for-upstream 2008-10-10 11:47:31 +01:00
Eric Miao
0c392ed9a7 [ARM] ohci-pxa27x: use ioremap() and offset for register access
This avoid the pre-mapping of OHCI controller register space, and the
mapping is made only when necessary (OHCI is probed).

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:58 +01:00
Eric Miao
0cb0b0d3c6 [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
Direct access to pxa27x specific register PSSR in a generic ohci driver
is no good, introduce pxa27x_clear_otgph() and move the implementation
into processor specific code.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:58 +01:00
Eric Miao
84bab7393b [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource
Depending on the order of how resource is defined in the platform
device is not good, use platform_get_{irq,resource} for the IRQ
and memory resources.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:58 +01:00
Eric Miao
596050bc75 [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:57 +01:00
Eric Miao
097b53348f [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
Direct access to USB host controller registers is considered to be not
portable, and is usually a bad sign for poorly abstracted interface.
Introduce .flags and .power_on_delay to "struct pxaohci_platform_data"
so that most platforms don't bother to write their own .init/.exit()
sequences.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07 19:12:57 +01:00
David Brownell
01c1714265 USB: fix EHCI periodic transfers
As noted by Stefan Neis <Stefan.Neis@kobil.com>, we had a recent
regression with EHCI periodic transfers, in some (seemingly not
all that common) cases.

The root cause was that the schedule activation was only loosely
coupled to the addition or removal of transfers, so two different
execution contexts could both think they had to deactivate (or
conversely activate) the schedule.  So this fix tightens that
coupling, managing it more like a refcount.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23 13:58:08 -07:00
David Brownell
0bcfeb3ec9 USB: ehci: fix some ehci hangs and crashes
I noticed that the "Refactor "if (handshake()) state = HC_STATE_HALT"
patch from earlier this year perpetuated a potential problem:  it can
mark the controller as halted when it's still running (but not acting
as, perhaps wrongly, expected).

That caused some hangs and crashes, rather than more polite failure
modes of a truly halted controller.  This patch forces a true halt,
and emits a (previously missing) diagnostic.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23 13:58:06 -07:00
David Vrabel
6a7c3e464e uwb: depend on EXPERIMENTAL
The UWB stack has some sysfs APIs that will change thus it's best
marked as EXPERIMENTAL until these APIs are finalized.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:36 +01:00
Inaky Perez-Gonzalez
d09318b8ab wusb: add HWA host controller driver
Add a driver for Wireless USB host controllers connected via USB (a
Host Wire Adapter or HWA).

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:31 +01:00
David Vrabel
7e6133aa42 wusb: WHCI host controller driver
A driver for Wireless USB host controllers that comply with the
Wireless Host Controller Interface (HCI) specification as published by
Intel.

The latest publically available version of the specification (0.95) is
supported (except for isochronous transfers).

Build fixes by Randy Dunlap <rdunlap@xenotime.net>

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:31 +01:00
Russell King
55c381e489 [ARM] omap: convert OMAP drivers to use ioremap()
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05 17:02:30 +01:00
Russell King
c3df1a2685 [ARM] omap: fix build error in ohci-omap.c
drivers/usb/host/ohci-omap.c: In function 'ohci_omap_init':
drivers/usb/host/ohci-omap.c:228: error: 'start_hnp' undeclared (first use in this function)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-04 09:45:47 +01:00
Dominik Brodowski
d39bd56452 pcmcia: encapsulate ioaddr_t
By now, ioaddr_t should only be used by the deprecated ioctl, as it does not
correctly reflect the maximum ioport range at least on some architectures.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-29 09:43:14 +02:00
Dominik Brodowski
ad913c1192 pcmcia: pcmcia_config_loop() improvement by passing vcc
By passing the current Vcc setting to the pcmcia_config_loop callback
function, we can remove pcmcia_get_configuration_info() calls from many
drivers.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23 01:22:52 +02:00
Dominik Brodowski
8e2fc39dde pcmcia: pcmcia_config_loop() default CIS entry handling
Many drivers use the default CIS entry within their pcmcia_config_loop()
callback function. Therefore, factor the default CIS entry handling out.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23 01:22:00 +02:00
Dominik Brodowski
498ac1899b pcmcia: pcmcia_config_loop() ConfigIndex unification
Almost all drivers set p_dev->conf.ConfigIndex to cfg->index in
the pcmcia_config_loop() callback function. Therefore, factor it out.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23 01:21:29 +02:00
Dominik Brodowski
84e2d34004 pcmcia: use pcmcia_loop_config in misc pcmcia drivers
Use the config loop helper in misc pcmcia drivers.

CC: Harald Welte <laforge@gnumonks.org>
CC: <linux-parport@lists.infradead.org>
CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Ed Okerson <eokerson@quicknet.net>
CC: linux-serial@vger.kernel.org
CC: boti@rocketmail.com
CC: linux-usb@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23 01:21:29 +02:00
Alan Stern
b5fb454f69 USB: automatically enable RHSC interrupts
This patch (as1069c) changes the way OHCI root-hub status-change
interrupts are enabled.  Currently a special HCD method,
hub_irq_enable(), is called when the hub driver is finished using a
root hub.  This approach turns out to be subject to races, resulting
in unnecessary polling.

The patch does away with the method entirely.  Instead, the driver
automatically enables the RHSC interrupt when no more status changes
are present.  This scheme is safe with controllers using
level-triggered semantics for their interrupt flags.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21 10:26:38 -07:00
Enrico Scholz
380ec6780a USB: ISP1760: fixed trivial math in comment
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Acked-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21 10:26:32 -07:00
Linus Torvalds
9c0d2a20fe Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (38 commits)
  [ARM] 5191/1: ARM: remove CVS keywords
  [ARM] pxafb: fix the warning of incorrect lccr when lcd_conn is specified
  [ARM] pxafb: add flag to specify output format on LDD pins when base is RGBT16
  [ARM] pxafb: fix the incorrect configuration of GPIO77 as ACBIAS for TFT LCD
  [ARM] 5198/1: PalmTX: PCMCIA fixes
  [ARM] Fix a pile of broken watchdog drivers
  [ARM] update mach-types
  [ARM] 5196/1: fix inline asm constraints for preload
  [ARM] 5194/1: update .gitignore
  [ARM] add proc-macros.S include to proc-arm940 and proc-arm946
  [ARM] 5192/1: ARM TLB: add v7wbi_{possible,always}_flags to {possible,always}_tlb_flags
  [ARM] 5193/1: Wire up missing syscalls
  [ARM] traps: don't call undef hook functions with spinlock held
  [ARM] 5183/2: Provide Poodle LoCoMo GPIO names
  [ARM] dma-mapping: provide sync_range APIs
  [ARM] dma-mapping: improve type-safeness of DMA translations
  [ARM] Kirkwood: instantiate the orion_spi driver in the platform code
  [ARM] prevent crashing when too much RAM installed
  [ARM] Kirkwood: Instantiate mv_xor driver
  [ARM] Orion: Instantiate mv_xor driver for 5182
  ...
2008-08-16 16:48:45 -07:00
Libin Yang
ab1666c136 USB: quirk PLL power down mode
On some AMD 700 series southbridges, ISO OUT transfers (such as audio
playback through speakers) on the USB OHCI controller may be corrupted
when an A-Link express power saving feature is active.

PLL power down mode in conjunction with link power management feature
L1 being enabled is the bad combination ... this patch prevents them
from being enabled when ISO transfers are pending.

Signed-off-by: Crane Cai <crane.cai@amd.com>
Signed-off-by: Libin Yang <libin.yang@amd.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13 17:32:58 -07:00
Yoshihiro Shimoda
54d0be9e3a USB: sh: r8a66597-hcd: fix disconnect regression
fix the regression in commit 29fab0cd89
that this driver executed reconnection processing when disconnected
some devices.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13 17:32:56 -07:00
Sebastian Siewior
7839b5162d usb: isp1760: don't be noisy about short packets.
According to Alan Stern, short packets are quite normal under
certain circumstances. This printk was triggered by usb to
serial converters on every packet and some usb sticks triggered
a few of those while plugging the stick.
This printks are now hidden unless USB debug mode is activated.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13 17:32:55 -07:00
Enrico Scholz
3f02a957d5 usb: ISP1760: improve pre-fetch timing
ISP1760 requires a delay of 90ns between programming the address and
reading the data.  Current driver solves this by a mdelay(1) which is
very heavy weighted and slow.  This patch applies the workaround from
the ISP1760 FAQ by using two different banks for PTD and payload data
and using a common wait for them.  This wait is done by an additional
ISP1760 access (whose timing constraints guarantee the 90ns delay).
This improves speed when reading from an USB stick from:

  $ time dd if=/dev/sda of=/dev/zero bs=65536 count=1638
  real    1m 15.43s
  user    0m 0.44s
  sys     0m 39.46s

to

  $ time dd if=/dev/sda of=/dev/zero bs=65536 count=1638
  real    0m 18.53s
  user    0m 0.16s
  sys     0m 12.97s

[bigeasy@linutronix.de: fixed comment formating, moved define into
   header file, obey 80 char rule]

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13 17:32:53 -07:00
Sebastian Siewior
a36c27dfd1 usb: return error code instead of 0 in the enqueue function.
if the enqueue function returns -ESHUTDOWN or -ENOMEM then
we return 0 instead of an error. This leads to a timeout and
then to a dequeue request of an not enqueued urb.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13 17:32:53 -07:00
Dmitry Baryshkov
e8b24450a6 USB: Hook start_hnp into ohci struct
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13 17:32:52 -07:00
Dmitry Baryshkov
1133cd8adf USB: ohci: make distrust_firmware a quirk
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13 17:32:52 -07:00
Alan Stern
38b375d961 USB: OHCI: fix system hang caused by earlier patch
This patch (as1114) fixes a problem that was revealed by an earlier
patch (as1069b).  Some broken controllers seem never to turn off their
RHCS interrupt status bit, even when told to do so.  As a result they
generate an interrupt storm and hang the system.

The patch avoids enabling RHSC interrupt requests when the RHCS status
bit is already set.  This should have no adverse affects on normal
controllers, since they won't set the status bit until a root-hub
status change actually occurs, in which case we wouldn't enable RHSC
interrupt requests anyway -- we would wait until the status change had
been processed and cleared.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13 17:32:49 -07:00
Russell King
492c71dd54 Merge branch 'for-rmk' of git://git.marvell.com/orion 2008-08-09 18:03:13 +01:00
Lennert Buytenhek
6f088f1d21 [ARM] Move include/asm-arm/plat-orion to arch/arm/plat-orion/include/plat
This patch performs the equivalent include directory shuffle for
plat-orion, and fixes up all users.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-09 13:44:58 +02:00
Linus Torvalds
49b75b87ce Merge branch 'for-linus-merged' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus-merged' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5177/1: arm/mach-sa1100/Makefile: remove CONFIG_SA1100_USB
  [ARM] 5166/1: magician: add MAINTAINERS entry
  [ARM] fix pnx4008 build errors
  [ARM] Fix SMP booting with non-zero PHYS_OFFSET
  [ARM] 5185/1: Fix spi num_chipselect for lubbock
  [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
  [ARM] Add support for arch/arm/mach-*/include and arch/arm/plat-*/include
  [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
  [ARM] Eliminate useless includes of asm/mach-types.h
  [ARM] Fix circular include dependency with IRQ headers
  avr32: Use <mach/foo.h> instead of <asm/arch/foo.h>
  avr32: Introduce arch/avr32/mach-*/include/mach
  avr32: Move include/asm-avr32 to arch/avr32/include/asm
  [ARM] sa1100_wdt: use reset_status to remember watchdog reset status
  [ARM] pxa: introduce reset_status and clear_reset_status for driver's usage
  [ARM] pxa: introduce reset.h for reset specific header information
2008-08-08 11:38:42 -07:00
Luis R. Rodriguez
7d283aee50 list.h: Add list_splice_tail() and list_splice_tail_init()
If you are using linked lists for queues list_splice() will not do what
you would expect even if you use the elements passed reversed. We need
to handle these differently. We add list_splice_tail() and
list_splice_tail_init().

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07 09:49:42 -04:00
Russell King
a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Russell King
be50972935 [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:08 +01:00
Russell King
0f8469a54f [ARM] Eliminate useless includes of asm/mach-types.h
There are 43 includes of asm/mach-types.h by files that don't
reference anything from that file.  Remove these unnecessary
includes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:40:04 +01:00