Commit Graph

2018 Commits

Author SHA1 Message Date
Eric Miao
e09d02e123 [ARM] 4480/1: pxa: change the pxa device naming scheme
1. for common devices across all the pxa variants, the names
   are changed to be:
     "pxa_device_xxx"

2. for pxa25x or pxa27x specific devices, the names are
   changed to be:
     "pxa25x_device_xxx", or
     "pxa27x_device_xxx"

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 09:57:18 +01:00
Tim Harvey
5c9b9123b3 [ARM] ixp4xx: fix IRQ GPIO direction configuration for GPIOs >= 8
I believe that the following patch is necessary to properly configure
GPIO line configuration for IRQ's which are mapped to a GPIO line >= 8
(without this patch the wrong GPIO is configured as an input.)

Signed-off-by: Tim Harvey <tim_harvey@yahoo.com>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 09:51:52 +01:00
Russell King
3be20cad15 [ARM] ks8695: no need to include linux/ptrace.h
arch/arm/mach-ks8695/irq.c doesn't need to include linux/ptrace.h
so remove it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 09:47:53 +01:00
Andrew Victor
c06911c00b [ARM] 4478/1: AT91: Convert AT91RM9200 to use atmel_spi driver
Convert the AT91RM9200 platform-setup code to use the new atmel_spi
driver (and manually-driven chip-selects), instead of the legacy
AT91-only SPI stack.

The AT91SAM9 processors are already using the atmel_spi driver.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 09:43:28 +01:00
Russell King
228adef16d [ARM] vfp: make fpexc bit names less verbose
Use the fpexc abbreviated names instead of long verbose names
for fpexc bits.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 09:39:57 +01:00
Dan Williams
70c14ff0e9 [ARM] 4495/1: iop: combined watchdog timer driver for iop3xx and iop13xx
In order for this driver to be shared across the iop architectures the
iop3xx and iop13xx header files are modified to present a common interface
for the iop_wdt driver.

Details:
* iop13xx supports disabling the timer while iop3xx does not.  This requires
  a few 'compatibility' definitions in include/asm-arm/hardware/iop3xx.h to
  preclude adding #ifdef CONFIG_ARCH_IOP13XX blocks to the driver code.
* The heartbeat interval is derived from the internal bus clock rate, so this
  this patch also exports the tick rate to the iop_wdt driver.

Cc: Curt Bruns <curt.e.bruns@intel.com>
Cc: Peter Milne <peter.milne@d-tacq.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 09:35:42 +01:00
Arnaud Patard
a8135fcfd0 [ARM] 4476/1: EM7210/SS4000E support
This patch adds the basic support for the em7210 board. It is similar to
the iq31244 board and can be found on Intel "Baxter Creek" ss4000e nas.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 09:35:35 +01:00
Paul Mundt
20c2df83d2 mm: Remove slab destructors from kmem_cache_create().
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 10:11:58 +09:00
Linus Torvalds
40b42f1ebf Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits)
  i2c: Delete the i2c-isa pseudo bus driver
  hwmon: refuse to load abituguru driver on non-Abit boards
  hwmon: fix Abit Uguru3 driver detection on some motherboards
  hwmon/w83627ehf: Be quiet when no chip is found
  hwmon/w83627ehf: No need to initialize fan_min
  hwmon/w83627ehf: Export the thermal sensor types
  hwmon/w83627ehf: Enable VBAT monitoring
  hwmon/w83627ehf: Add support for the VID inputs
  hwmon/w83627ehf: Fix timing issues
  hwmon/w83627ehf: Add error messages for two error cases
  hwmon/w83627ehf: Convert to a platform driver
  hwmon/w83627ehf: Update the Kconfig entry
  make coretemp_device_remove() static
  hwmon: Add LM93 support
  hwmon: Improve the pwmN_enable documentation
  hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM
  hwmon: Add support for newer uGuru's
  hwmon/f71805f: Add temperature-tracking fan control mode
  hwmon/w83627ehf: Preserve speed reading when changing fan min
  hwmon: fix detection of abituguru volt inputs
  ...

Manual fixup of trivial conflict in MAINTAINERS file
2007-07-19 14:24:57 -07:00
Jean Delvare
e24b8cb4fa i2c: Delete the i2c-isa pseudo bus driver
There are no users of i2c-isa left, so we can finally get rid of it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19 14:25:20 -04:00
Yoann Padioleau
dd00cc486a some kmalloc/memset ->kzalloc (tree wide)
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).

Here is a short excerpt of the semantic patch performing
this transformation:

@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@

 x =
- kmalloc
+ kzalloc
  (E1,E2)
  ...  when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);

@@
expression E1,E2,E3;
@@

- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)

[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:50 -07:00
Fenghua Yu
5fb7dc37dc define new percpu interface for shared data
per cpu data section contains two types of data.  One set which is
exclusively accessed by the local cpu and the other set which is per cpu,
but also shared by remote cpus.  In the current kernel, these two sets are
not clearely separated out.  This can potentially cause the same data
cacheline shared between the two sets of data, which will result in
unnecessary bouncing of the cacheline between cpus.

One way to fix the problem is to cacheline align the remotely accessed per
cpu data, both at the beginning and at the end.  Because of the padding at
both ends, this will likely cause some memory wastage and also the
interface to achieve this is not clean.

This patch:

Moves the remotely accessed per cpu data (which is currently marked
as ____cacheline_aligned_in_smp) into a different section, where all the data
elements are cacheline aligned. And as such, this differentiates the local
only data and remotely accessed data cleanly.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00
Nick Piggin
83c54070ee mm: fault feedback #2
This patch completes Linus's wish that the fault return codes be made into
bit flags, which I agree makes everything nicer.  This requires requires
all handle_mm_fault callers to be modified (possibly the modifications
should go further and do things like fault accounting in handle_mm_fault --
however that would be for another patch).

[akpm@linux-foundation.org: fix alpha build]
[akpm@linux-foundation.org: fix s390 build]
[akpm@linux-foundation.org: fix sparc build]
[akpm@linux-foundation.org: fix sparc64 build]
[akpm@linux-foundation.org: fix ia64 build]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Still apparently needs some ARM and PPC loving - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:41 -07:00
David Brownell
b5b9068c1e csb337 supports "new style" rtc-ds1307
Update csb337 board specific init to support "new style" rtc-ds1307 code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Bill Gatliff <bgat@billgatliff.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:09 -07:00
Martin Michlmayr
c00593f6f8 Thecus N2100: register rtc-rs5c372 i2c device
Use the new i2c framework to load rtc-rs5c372 for the Thecus N2100.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Tested-by: Voipio Riku <Riku.Voipio@movial.fi>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:08 -07:00
Alexey Dobriyan
f284ce7269 PTRACE_POKEDATA consolidation
Identical implementations of PTRACE_POKEDATA go into generic_ptrace_pokedata()
function.

AFAICS, fix bug on xtensa where successful PTRACE_POKEDATA will nevertheless
return EPERM.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:03 -07:00
Alexey Dobriyan
7664732315 PTRACE_PEEKDATA consolidation
Identical implementations of PTRACE_PEEKDATA go into generic_ptrace_peekdata()
function.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:03 -07:00
Pavel Emelianov
bcdcd8e725 Report that kernel is tainted if there was an OOPS
If the kernel OOPSed or BUGed then it probably should be considered as
tainted.  Thus, all subsequent OOPSes and SysRq dumps will report the
tainted kernel.  This saves a lot of time explaining oddities in the
calltraces.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Added parisc patch from Matthew Wilson  -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Linus Torvalds
e030dbf91a Merge branch 'ioat-md-accel-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop
* 'ioat-md-accel-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop: (28 commits)
  ioatdma: add the unisys "i/oat" pci vendor/device id
  ARM: Add drivers/dma to arch/arm/Kconfig
  iop3xx: surface the iop3xx DMA and AAU units to the iop-adma driver
  iop13xx: surface the iop13xx adma units to the iop-adma driver
  dmaengine: driver for the iop32x, iop33x, and iop13xx raid engines
  md: remove raid5 compute_block and compute_parity5
  md: handle_stripe5 - request io processing in raid5_run_ops
  md: handle_stripe5 - add request/completion logic for async expand ops
  md: handle_stripe5 - add request/completion logic for async read ops
  md: handle_stripe5 - add request/completion logic for async check ops
  md: handle_stripe5 - add request/completion logic for async compute ops
  md: handle_stripe5 - add request/completion logic for async write ops
  md: common infrastructure for running operations with raid5_run_ops
  md: raid5_run_ops - run stripe operations outside sh->lock
  raid5: replace custom debug PRINTKs with standard pr_debug
  raid5: refactor handle_stripe5 and handle_stripe6 (v3)
  async_tx: add the async_tx api
  xor: make 'xor_blocks' a library routine for use with async_tx
  dmaengine: make clients responsible for managing channels
  dmaengine: refactor dmaengine around dma_async_tx_descriptor
  ...
2007-07-13 10:52:27 -07:00
Dan Williams
5816815f78 ARM: Add drivers/dma to arch/arm/Kconfig
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-07-13 08:06:19 -07:00
Dan Williams
2492c84518 iop3xx: surface the iop3xx DMA and AAU units to the iop-adma driver
Adds the platform device definitions and the architecture specific support
routines (i.e. register initialization and descriptor formats) for the
iop-adma driver.

Changelog:
* add support for > 1k zero sum buffer sizes
* added dma/aau platform devices to iq80321 and iq80332 setup
* fixed the calculation in iop_desc_is_aligned
* support xor buffer sizes larger than 16MB
* fix places where software descriptors are assumed to be contiguous, only
  hardware descriptors are contiguous for up to a PAGE_SIZE buffer size
* convert to async_tx
* add interrupt support
* add platform devices for 80219 boards
* do not call platform register macros in driver code
* remove switch() statements for compatible register offsets/layouts
* change over to bitmap based capabilities
* remove unnecessary ARM assembly statement
* checkpatch.pl fixes
* gpl v2 only correction
* phys move to dma_async_tx_descriptor

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-07-13 08:06:19 -07:00
Dan Williams
39a8d7d13c iop13xx: surface the iop13xx adma units to the iop-adma driver
Adds the platform device definitions and the architecture specific
support routines (i.e. register initialization and descriptor formats) for the
iop-adma driver.

Changelog:
* added 'descriptor pool size' to the platform data
* add base support for buffer sizes larger than 16MB (hw max)
* build error fix from Kirill A. Shutemov
* rebase for async_tx changes
* add interrupt support
* do not call platform register macros in driver code
* remove unnecessary ARM assembly statement
* checkpatch.pl fixes
* gpl v2 only correction

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-07-13 08:06:18 -07:00
Linus Torvalds
4aabab2181 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (50 commits)
  [ARM] sa1100: remove boot time RTC initialisation
  [ARM] sa1100: stop doing our own rtc management over suspend
  [ARM] 4474/1: Do not check the PSR_F_BIT in valid_user_regs
  [ARM] 4473/2:  Take the HWCAP definitions out of the elf.h file
  [ARM] pxa: move platform devices to separate header file
  [ARM] pxa: move device registration into CPU-specific file
  [ARM] pxa: remove boot time RTC initialisation
  [ARM] pxa: stop doing our own rtc management over suspend
  [ARM] 4451/1: pxa: make dma.c generic and remove cpu specific dma code
  [ARM] 4450/1: pxa: add pxa25x_init_irq() and pxa27x_init_irq()
  [ARM] 4440/1: PXA: enable the checking of ICIP2 for IRQs
  [ARM] 4438/1: PXA: remove #ifdef .. #endif from pxa_gpio_demux_handler()
  [ARM] 4437/1: PXA: move the GPIO IRQ initialization code to pxa_init_irq_gpio()
  [ARM] 4436/1: PXA: move low IRQ initialization code to pxa_init_irq_low()
  [ARM] 4435/1: PXA: remove PXA_INTERNAL_IRQS
  [ARM] 4434/1: PXA: remove PXA_IRQ_SKIP
  [ARM] pxa: Fix PXA27x suspend type validation, remove pxa_pm_prepare()
  [ARM] pxa: move pm_ops structure into CPU specific files
  [ARM] pxa: introduce cpu_is_pxaXXX macros
  [ARM] pxa: remove MMC register defines from pxa-regs.h
  ...
2007-07-12 14:17:12 -07:00
Linus Torvalds
21ba0f88ae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
  PCI: Only build PCI syscalls on architectures that want them
  PCI: limit pci_get_bus_and_slot to domain 0
  PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
  PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
  PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
  PCI: hotplug: pciehp: wait for 1 second after power off slot
  PCI: pci_set_power_state(): check for PM capabilities earlier
  PCI: cpci_hotplug: Convert to use the kthread API
  PCI: add pci_try_set_mwi
  PCI: pcie: remove SPIN_LOCK_UNLOCKED
  PCI: ROUND_UP macro cleanup in drivers/pci
  PCI: remove pci_dac_dma_... APIs
  PCI: pci-x-pci-express-read-control-interfaces cleanups
  PCI: Fix typo in include/linux/pci.h
  PCI: pci_ids, remove double or more empty lines
  PCI: pci_ids, add atheros and 3com_2 vendors
  PCI: pci_ids, reorder some entries
  PCI: i386: traps, change VENDOR to DEVICE
  PCI: ATM: lanai, change VENDOR to DEVICE
  PCI: Change all drivers to use pci_device->revision
  ...
2007-07-12 13:40:57 -07:00
Russell King
ca9ced7f67 Merge branches 'at91', 'davinci', 'imx', 'iop', 'ixp', 'ks8695', 'misc', 'pxa' and 's3c' into devel 2007-07-12 21:30:18 +01:00
Russell King
fcae8e0988 [ARM] sa1100: remove boot time RTC initialisation
The RTC library code contains everything necessary to set the
system time from the RTC; for similar reasons as the previous
commit, it's far better to let the RTC library code sort this
out rather than implement something which might not be
appropriate for everyone.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 21:29:45 +01:00
Russell King
f3ebbc20ab [ARM] sa1100: stop doing our own rtc management over suspend
Remove the RTC management over a suspend/resume cycle.  As per the
corresponding PXA patch, the RTC library code handles updating
system time on resume.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 21:29:06 +01:00
Russell King
46c41e62a1 [ARM] pxa: move platform devices to separate header file
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:21 +01:00
Russell King
34f3231f43 [ARM] pxa: move device registration into CPU-specific file
This allows individual CPU support to determine which platform
devices should be registered.  Also fix a copy-n-paste bug in
the I2C power platform device entry.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:21 +01:00
Russell King
4adb70fc1b [ARM] pxa: remove boot time RTC initialisation
The RTC library code contains everything necessary to set the
system time from the RTC; for similar reasons as the previous
commit, it's far better to let the RTC library code sort this
out rather than implement something which might not be
appropriate for everyone.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:17 +01:00
Russell King
2aca0a8657 [ARM] pxa: stop doing our own rtc management over suspend
Remove the RTC management over a suspend/resume cycle.  Firstly,
we may not be using the internal RTC for time keeping; some
platforms have an external RTC for this inspite of the PXA having
an internal RTC.  Secondly, the RTC library code handles updating
system time on resume.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:16 +01:00
Eric Miao
f53f066c25 [ARM] 4451/1: pxa: make dma.c generic and remove cpu specific dma code
Since the number of dma channels varies between pxa25x and pxa27x, it
introduces some specific code in dma.c. This patch moves the specific
code to pxa25x.c and pxa27x.c and makes dma.c more generic.

1. add pxa_init_dma() for dma initialization, the number of channels
   are passed in by the argument

2. add a "prio" field to the "struct pxa_dma_channel" for the channel
   priority, and is initialized in pxa_init_dma()

3. use a general priority comparison with the channels "prio" field so
   to remove the processor specific pxa_for_each_dma_prio macro,  this
   is not lightning fast as the original one,  but it is acceptable as
   it happens when requesting dma, which is usually not so performance
   critical

Signed-off-by: eric miao <eric.miao@marvell.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:16 +01:00
Eric Miao
cd49104d99 [ARM] 4450/1: pxa: add pxa25x_init_irq() and pxa27x_init_irq()
/* should be ok this time, I aligned this patch to your arm:pxa2.mbox */

1. move pxa25x specific IRQ initialization code to pxa25x_init_irq()
and pxa27x code to pxa27x_init_irq(), remove pxa_init_irq()

2. replace all pxa_init_irq() with their PXA25x or PXA27x specific
functions

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:15 +01:00
Eric Miao
4a3dcd35c8 [ARM] 4438/1: PXA: remove #ifdef .. #endif from pxa_gpio_demux_handler()
1. use GPIO_IRQ_mask[] to select those bits of interest, actually
   only those "unmasked" GPIO IRQs with their corresponding bits
   in GPIO_IRQ_mask[] set to "1" should be checked

2. remove #ifdef PXA_LAST_GPIO > 96 .. #endif, GPIO_IRQ_mask[]
   is used to mask out the irrelevant bits, so that even though
   the GEDR3 on PXA25x is reserved, it will be masked, and the
   following code will never run. Another point is that GPIO85-
   GPIO95 bits within GEDR2 will also be masked out on PXA25x

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:14 +01:00
Eric Miao
348f2e3b29 [ARM] 4437/1: PXA: move the GPIO IRQ initialization code to pxa_init_irq_gpio()
move the GPIO IRQ initialization code to pxa_init_irq_gpio()

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:11 +01:00
Eric Miao
53665a50fd [ARM] 4436/1: PXA: move low IRQ initialization code to pxa_init_irq_low()
1. move low IRQ initialization code to pxa_init_irq_low()

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:11 +01:00
Eric Miao
c08b7b3ef6 [ARM] 4435/1: PXA: remove PXA_INTERNAL_IRQS
1. define PXA_GPIO_IRQ_BASE to be right after the internal IRQs,
   and define PXA_GPIO_IRQ_NUM to be 128 for all PXA2xx variants

2. make the code specific to the high IRQ numbers (32..64) to be
   PXA27x specific

3. add a function pxa_init_irq_high() to initialize the internal
   high IRQ chip, the invoke of this function could be moved to
   PXA27x specific initialization code

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:10 +01:00
Eric Miao
486c955118 [ARM] 4434/1: PXA: remove PXA_IRQ_SKIP
1. PXA_IRQ_SKIP is defined to be 7 on PXA25x so that the first IRQ
   starts from zero. This makes IRQ numbering inconsistent between
   PXA25x and PXA27x. Remove this macro so that the same IRQ_XXXXX
   definition has the same value on both PXA25x and PXA27x.

2. make IRQ_SSP3..IRQ_PWRI2C valid only if PXA27x is defined, this
   avoids unintentional use of these macros on PXA25x

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:09 +01:00
Russell King
88dfe98c68 [ARM] pxa: Fix PXA27x suspend type validation, remove pxa_pm_prepare()
pxa_pm_prepare() tried to validate the suspend method type.  As
noted in previous commits:
	eb9289eb20
	9c372d06ce
	e8c9c50269

the checking of the suspend type in the 'prepare' method is the
wrong place to do this; use the 'valid' method instead.  This
means that pxa_pm_prepare() can be entirely removed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:06 +01:00
Russell King
e176bb05fe [ARM] pxa: move pm_ops structure into CPU specific files
Move the pm_ops structure into the PXA25x and PXA27x support
files.  Remove the old pxa_pm_prepare() function, and rename
the both pxa_cpu_pm_prepare() functions as pxa_pm_prepare().
We'll fix that later.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:05 +01:00
Russell King
b23170c01f [ARM] pxa: introduce cpu_is_pxaXXX macros
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:28:04 +01:00
Russell King
f4b6a0a401 [ARM] pxa: use mutexes instead of semaphores
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:27:55 +01:00
Russell King
f62c3f2c35 [ARM] pxa: remove useless pxa_pm_finish() function
pxa_pm_finish() does nothing but return zero.  The core code
does nothing with this return value, and will not try to call
the finish method in the pm_ops structure if it is NULL.

Therefore, we can remove this useless function.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 14:27:53 +01:00
George G. Davis
909d6c6c80 [ARM] 4453/1: Fully Decode ARM instruction set state in show_regs() tombstone
The ARM show_regs() tombstone only partially decodes which ARM ISA was
executing at the time a fault occurred displaying either "(T)" for the
Thumb case or nothing at all for other cases.  This patch therefore
explicitly identifies which state the processor is in at the time of
a fault: ARM, Thumb, Jazelle or JazelleEE.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:13:35 +01:00
Bill Gatliff
9d20fdd58e [ARM] 4423/1: add ATAGS support
Examines the ATAGS pointer (r2) at boot, and interprets
a nonzero value as a reference to an ATAGS structure. A
suitable ATAGS structure replaces the kernel's command line.

Signed-off-by: Bill Gatliff <bgat@billgatliff.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:13:33 +01:00
Catalin Marinas
7d09e85448 [ARM] 4393/2: ARMv7: Add uncompressing code for the new CPU Id format
The current arch/arm/boot/compressed/head.S code only supports cores
to ARMv6 with the old CPU Id format. This patch adds support for the
new ARMv6 with the new CPU Id and ARMv7 cores that no longer have the
ARMv4 cache operations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:13:33 +01:00
Russell King
6d78b5f9c6 [ARM] Fix bounding error in ioremap_pfn()
If size=16M offset=2K then we should map two supersections
rather than just one.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:13:33 +01:00
Russell King
4486b86368 [ARM] riscpc: fix decompressor font file handling
font_acorn_8x8.o was being built in drivers/video/console/ twice
during a build _in the same location_ - once for the kernel proper,
and once for the decompressor.  The result is when you came to run an
install target, the kernel was always rebuilt due to this file
apparantly having been built with different compiler arguments.

Solve this by making a local copy at build time in the decompressor's
directory.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:13:32 +01:00
Andrew Victor
8a87a996ea [ARM] 4377/1: KS8695: GPIO driver
Driver to control the GPIO pins on the KS8695 processor.
The driver natively supports the Generic GPIO interface.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:34 +01:00
Russell King
eab03b3f66 [ARM] If linux/irq.h is included, asm/irq.h is not required
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:18 +01:00
Michael-Luke Jones
d85ed59524 [ARM] 4407/1: Remove in-kernel mach id setting for gtwx5715 ixp4xx board
If MACH_GTWX5715 is set in Kconfig, this code sets the mach id
automatically. Howeber, this means that any IXP4xx kernel which
is setup to support the gtwx5715 board will not successfully boot
on any other board.

If the bootloader sets the wrong mach id, it should be set correctly
by a kernel shim.

Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Michael-Luke Jones
ddaca4a26e [ARM] 4408/2: Fixup support for gtwx5715 ixp4xx board
This patch fixes up compiling of the gtwx5715 board setup code,
which has apparently been broken since 2.6.18 and the generic
IRQ changes. In addition it removes some unecessary extern
declarations in the gtwx5715-pci.c file.

Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Imre Kaloz
dcdeeb21c0 [ARM] 4426/2: Netgear WG302 v2 and WAG302 v2 support
This patch provides support for the Netgear WG302 v2 and WAG302 v2 AccessPoint series.

This patch relies on the patch "Gateway 7001 series support" minimally, as they only have UART2 connected.

Updated to stay below the 80 char limit in uncompress.h

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Imre Kaloz
46918bd13b [ARM] 4425/2: Gateway 7001 series support
This patch provides support for the Gateway 7001 AccessPoint series.

Updated to stay below the 80 char limit in uncompress.h

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Vladimir Barinov
4ad48b4bfa [ARM] 4385/2: ixdp425: NAND support
IXDP425 NAND support (arch specific part).

The generic platform driver that is used by ixdp425 platfrom is already
in upstream kernel in 2.6.22-rc1.

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Signed-off-by: Ruslan Sushko <rsushko@ru.mvista.com>
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Dan Williams
51198ea947 [ARM] 4429/2: iop13xx: expose the 'iop' attribute versions of the tpmi control registers
The tpmi control registers can be accessed on the internal bus via an
address with PCI attributes or IOP attributes (i.e. read-only,
read-write... etc).  The sas driver needs access to the iop-attribute
registers for initialization.

Changelog:
* use ARRAY_SIZE for num_resources, Russell King

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:55 +01:00
Pavel Pisa
89bba43514 [ARM] 4374/3: i.MX/MX1 clock event source
Support clock event source based on i.MX general purpose
timer in free running timer mode.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:39 +01:00
Pavel Pisa
b3e6a508ed [ARM] 4373/1: i.MX/MX1 GPIO support implementation
Support for generic input output for MX1 family.
The implementation prevents allocation of one pin
by two users, but does not store pointer to the user
description permanently, because this solution
would have bigger memory overhead.

The simple way to integrate code with per BSP
pins setup and allocation is required else all GPIO
registration checking is useless. The function
imx_gpio_setup_multiple_pins() can be used for this
purpose in future.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:39 +01:00
Andrew Victor
d0f9b55ece [ARM] 4420/2: AT91: GPIO buttons on SAM9261-EK board
Register the GPIO-connected buttons on the SAM9261-EK board as a
"gpio-keys" platform device.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:21 +01:00
Andrew Victor
cdf95c7369 [ARM] 4379/1: AT91: LCD support on SAM9261-EK and SAM9263-EK boards
Add board-specific setup for the LCD on the Atmel AT91SAM9261-EK and
AT91SAM9263-EK boards.

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:21 +01:00
Ben Dooks
3c3e69cd4c [ARM] 4470/2: OSIRIS: large page NAND support
Add support for the partition layout on the revision B
modules which have large page NAND fitted.

The new partition table accounts for the use of the
128KiB block parts, which means the second partition
on the device is moved to the new boundary.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:01:13 +01:00
Ben Dooks
5ce4b1fe6c [ARM] 4467/3: BAST: AX88796 device resources
Add resources for the AX88796 on the Simtec BAST.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 10:56:27 +01:00
Ben Dooks
ad3613f479 [ARM] 4469/1: ANUBIS: large page NAND support
Add support for the partition layour used on the
revision B modules which ship with large page NAND
flash as default.

The differnce between the old and new layouts is that
the large page devices use 128KiB blocks, so the
initial loader partition now ends at 128KiB boundary
pushing the begining of partition 1 up. The rest of
the partitions are in the same place as the small page
NAND devices.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 10:56:25 +01:00
Ben Dooks
8a9ccb7f18 [ARM] 4468/2: ANUBIS: Add SM501 device resources
Add resources for the SM501 present on the
Simtec Anubis board, including the framebuffer
and the I2C for DDC.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 10:56:24 +01:00
Ben Dooks
eac1d8dab0 [ARM] 4466/1: ANUBIS: Anubis AX88796 support
This patch adds the resources necessary for the
AX88796 driver to attach to the AX88796 network
controller fitted on the Simtec Anubis board.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 10:56:23 +01:00
Vladimir Barinov
83f53220f8 [ARM] 4432/5: davinci: pin mux support
Support pin multiplexing configurations driver for TI DaVinci SoC

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Acked-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 09:57:09 +01:00
Vladimir Barinov
3d9edf09d4 [ARM] 4457/2: davinci: GPIO support
Support GPIO driver for TI DaVinci SoC

Signed-off-by: Vladimir Barinov <vbarino@ru.mvista.com>
Acked-by: David Brownell <david-b@pacbell.net>
Acked-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 09:57:09 +01:00
Vladimir Barinov
3e062b07ad [ARM] 4430/1: davinci: clock control support
Support clock control driver for TI DaVinci SoC

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 09:57:09 +01:00
Rafael J. Wysocki
93160c6397 PM: do not use saved_state from struct dev_pm_info on ARM
The saved_state member of 'struct dev_pm_info' that's going to be removed
is used in arch/arm/common/locomo.c, arch/arm/common/sa1111.c and
arch/arm/mach-sa1100/neponset.c.  Change the code in there to use local
variables for saving the state of devices during suspend.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:02 -07:00
Matthew Wilcox
36e235901f PCI: Only build PCI syscalls on architectures that want them
The PCI syscalls are built on every architecture except X86, but only
a few have ever hooked them up.  Use a new Kconfig symbol to save a
couple of kB on the architectures that have never used the syscalls.
Tested on x86 and ia64 only.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:13 -07:00
Russell King
082f47a79b [ARM] always allow dump_stack() to produce a backtrace
Don't make this dependent on CONFIG_DEBUG_KERNEL - if we hit a WARN_ON
we need the stack trace to work out how we got to that point.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-05 19:59:51 +01:00
Russell King
7b9c7b4d07 [ARM] Fix non-page aligned boot time mappings
AT91SAM9260 stopped booting with the recent changes to MM
initialisation - it was asking for a non-aligned virtual address
which caused loops to be non-terminal.  Fix this by rounding
virtual addresses down, but remember to include the offset in
the length, and round the length up to the following page.

This means that asking for a mapping of 4K starting at 2K into
a page maps two pages as one would expect.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-04 21:16:33 +01:00
Richard Purdie
1f750a782c [ARM] 4458/1: pxa: Fix CKEN usage and hence fix pxa suspend/resume
The PXA CKEN changes broken syspend/resume on the pxa27x. This patch
corrects the problem and fixes another couple of bad references.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-02 13:39:37 +01:00
Andrzej Zaborowski
756813cac1 [ARM] 4454/1: Use word accesses in Versatile PCI config reads
ARM Versatile PCI config reads of one byte width have the lowest two
bits of the address cleared and result in reading from a wrong place
in the config space.  This change is to use word size accesses like it is done for halfword reads.

Byte reads are used for retrieving the IRQ number of a PCI device and the problem was not exposed until 2.6.20 because the value read was discarded in drivers/pci/setup-irq.c (recently fixed).

Signed-off-by: Andrzej Zaborowski <andrew@openedhand.com>
Acked-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-02 13:39:35 +01:00
Rafael J. Wysocki
2391dae3e3 PM: introduce set_target method in pm_ops
Commit 52ade9b3b9 changed the suspend code
ordering to execute pm_ops->prepare() after the device model per-device
.suspend() calls in order to fix some ACPI-related issues.  Unfortunately, it
broke the at91 platform which assumed that pm_ops->prepare() would be called
before suspending devices.

at91 used pm_ops->prepare() to get notified of the target system sleep state,
so that it could use this information while suspending devices.  However, with
the current suspend code ordering pm_ops->prepare() is called too late for
this purpose.  Thus, at91 needs an additional method in 'struct pm_ops' that
will be used for notifying the platform of the target system sleep state.
Moreover, in the future such a method will also be needed by ACPI.

This patch adds the .set_target() method to 'struct pm_ops' and makes the
suspend code call it, if implemented, before executing the device model
per-device .suspend() calls.  It also modifies the at91 code to use
pm_ops->set_target() instead of pm_ops->prepare().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01 12:29:44 -07:00
David Woodhouse
edd5cd4a94 Introduce fixed sys_sync_file_range2() syscall, implement on PowerPC and ARM
Not all the world is an i386.  Many architectures need 64-bit arguments to be
aligned in suitable pairs of registers, and the original
sys_sync_file_range(int, loff_t, loff_t, int) was therefore wasting an
argument register for padding after the first integer.  Since we don't
normally have more than 6 arguments for system calls, that left no room for
the final argument on some architectures.

Fix this by introducing sys_sync_file_range2(int, int, loff_t, loff_t) which
all fits nicely.  In fact, ARM already had that, but called it
sys_arm_sync_file_range.  Move it to fs/sync.c and rename it, then implement
the needed compatibility routine.  And stop the missing syscall check from
bitching about the absence of sys_sync_file_range() if we've implemented
sys_sync_file_range2() instead.

Tested on PPC32 and with 32-bit and 64-bit userspace on PPC64.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:30 -07:00
Nicolas Pitre
0c07f6115b [ARM] 4449/1: more entries in arch/arm/boot/.gitignore
Signed-off-by: Nicolas Pitre <npitre@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-25 20:37:35 +01:00
Catalin Marinas
92c83ff1ce [ARM] 4452/1: Force the literal pool dump before reloc_end
In the arch/arm/boot/compressed/head.S file, the contents of the
literal pool accumulated during the relocatable code must be dumped
before reloc_end.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-25 20:36:27 +01:00
Russell King
154c772ebf [ARM] Update show_regs/oops register format
Add the kernel release and version information to the output of
show_regs/oops.  Add the CPU PSR register.  Avoid using printk
to output partial lines; always output a complete line.

Re-combine the "Control" and "Table + DAC" lines after nommu
separated them; we don't want to waste vertical screen space
needlessly.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-18 15:04:42 +01:00
Russell King
d9202429e6 [ARM] Add support for pause_on_oops and display preempt/smp options
Add calls to oops_enter() and oops_exit() to __die(), so that
things like lockdep know when an oops occurs.

Add suffixes to the oops report to indicate whether the running
kernel has been built with preempt or smp support.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-17 13:40:39 +01:00
Ben Dooks
6c1640d52b [ARM] 4445/1: ANUBIS: Fix CPLD registers
Update the ANUBIS register definitions inline with the
specs and ensure they are registered correctly.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-11 09:09:34 +01:00
Ben Dooks
5698bd28c6 [ARM] 4444/2: OSIRIS: CPLD suspend fix
Ensure the CPLD 8bit settings are preserved over a suspend/resume
cycle as the CPU sends a hard-reset at resume time.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-11 09:09:31 +01:00
Ben Dooks
55ba86bc6c [ARM] 4443/1: OSIRIS: Add watchdog device to machine devices
Add the watchdog timer to the list of devices
the Osiris registers at startup.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-11 09:09:20 +01:00
Ben Dooks
c362aecdb5 [ARM] 4442/1: OSIRIS: Fix CPLD register definitions
Fix the CPLD register definitions to correctly mirror the
documentation

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-11 09:09:15 +01:00
Russell King
5d4cae5fe2 [ARM] VFP: fix section mismatch error
Fix a real section mismatch issue; the test code is thrown away after
initialisation, but if we do not detect the VFP hardware, it is left
hooked into the exception handler.  Any VFP instructions which are
subsequently executed risk calling the discarded exception handler.

Introduce a new "null" handler which returns to the "unrecognised
fault" return address.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-10 12:22:20 +01:00
Russell King
f72267c30f [ARM] Solve buggy smp_processor_id() usage
BUG: using smp_processor_id() in preemptible [00000001] code: opcontrol/427

Resolve this bug by ensuring that we're not using smp_processor_id() in
a preemptable context (by disabling preemption.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 21:31:49 +01:00
Andrew Victor
b6b27ae5e8 [ARM] 4419/1: AT91: SAM9 USB clocks check for suspending
When suspending to slow-clock mode, at91_pm_verify_clocks() is called to
ensure that all the clocks are disabled or in the correct state.

This patch replaces the "#warning TODO" messages for the SAM9 processors
with the correct code.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 21:31:48 +01:00
Andrew Victor
1f4b49a429 [ARM] 4418/1: AT91: Number of programmable clocks differs
The number of programmable clocks available on the AT91 processors can
differ, therefore do not always display the contents of the PMC_PCKR(0)
.. PMC_PCKR(3) registers (ie, assume there are 4 clocks).

If CONFIG_AT91_PROGRAMMABLE_CLOCKS is enabled, the programmable clocks
will be registered like the other system/peripheral clocks, and the
state of the programmable clocks will be displayed like with the other
clocks.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 21:31:43 +01:00
Catalin Marinas
c7341d436a [ARM] 4392/2: Do not corrupt the SP register in compressed/head.S
ARMv7 support code requires a valid stack for saving/restoring
registers as the whole D-cache flushing function is more complex. This
patch ensures that the SP register is not corrupted.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-02 21:31:43 +01:00
Yoann Padioleau
f834368564 parse errors in ifdefs
Fix various bits of obviously-busted code which we're not happening to
compile, due to ifdefs.

Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Jan Kara <jack@ucw.cz>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 08:18:28 -07:00
Russell King
cdea460643 [ARM] Fix some section mismatch warnings
The following patch fixes these section mismatch warnings:

WARNING: arch/arm/mach-at91/built-in.o(.text+0xdf4): Section mismatch: reference to .init.data:dk_nand_partition (between 'nand_partitions' and 'at91_leds_event')
WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions')
WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (between 'nand_partitions' and 'ads7843_pendown_state')
WARNING: arch/arm/mach-at91/built-in.o(.text+0xbdc): Section mismatch: reference to .init.data:ek_nand_partition (after 'nand_partitions')
WARNING: arch/arm/mach-at91/built-in.o(.text+0xc28): Section mismatch: reference to .init.data:kb9202_nand_partition (after 'nand_partitions')
WARNING: arch/arm/mach-footbridge/built-in.o(.text+0xaa4): Section mismatch: reference to .init.data:cats_pci (between 'cats_pci_init' and 'ebsa285_leds_event')WARNING: arch/arm/mach-ixp2000/built-in.o(.text+0xb54): Section mismatch: reference to .init.text:ixp2000_init_irq (between 'ixdp2x00_init_irq' and 'ixdp2x00_irq_handler')
WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x670): Section mismatch: reference to .init.text:ixp23xx_pci_common_init (between 'ixp23xx_pci_slave_init' and 'ixp23xx_pci_scan_bus')
WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x890): Section mismatch: reference to .init.text:ixp23xx_init_irq (between 'ixdp2351_init_irq' and 'roadrunner_pci_preinit')
WARNING: arch/arm/mach-ixp23xx/built-in.o(.text+0x9a8): Section mismatch: reference to .init.text:ixp23xx_pci_preinit (after 'roadrunner_pci_preinit')
WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x80): Section mismatch: reference to .init.text:imx_set_mmc_info (between '__ksymtab_imx_set_mmc_info' and '__ksymtab_set_imx_fb_info')
WARNING: arch/arm/mach-imx/built-in.o(__ksymtab+0x88): Section mismatch: reference to .init.text:set_imx_fb_info (after '__ksymtab_set_imx_fb_info')
WARNING: arch/arm/mach-sa1100/built-in.o(.text+0x1930): Section mismatch: reference to .init.data:neponset_port_fns (between 'neponset_probe' and 'assabet_leds_event')
WARNING: drivers/built-in.o(.text+0x3f100): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted')
WARNING: drivers/built-in.o(.text+0x3f1c8): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted')
WARNING: drivers/built-in.o(.text+0x4f988): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted')
WARNING: drivers/built-in.o(.text+0x4fa50): Section mismatch: reference to .init.text:ps2_clear_input (between 'ps2_probe' and 'ps2_cmd_aborted')

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 17:48:45 +01:00
Catalin Marinas
2ccdd1e77d [ARM] 4394/1: ARMv7: Add the TLB range operations
We are currently using the ARMv6 operations but need to duplicate some
of the code because of the introduction of the new CPU barrier
instructions in ARMv7.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 14:32:07 +01:00
Michael-Luke Jones
919a842920 [ARM] 4410/1: Remove extern declarations in coyote/ixdpg425-pci.c
This patch removes apparently unnecessary extern declarations in
coyote-pci.c and ixdpg425-pci.c within arch/arm/mach-ixp4xx and
has been compile-tested without producing warnings or errors.

Kernel coding style forbids the use of extern declarations within .c
files.

Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 13:15:39 +01:00
Ben Dooks
1ff082882f [ARM] 4416/1: NWFPE: fix undeclared symbols
Fix the undeclared symbols sparse is warning about.

arch/arm/nwfpe/softfloat.c:1727:7: warning: symbol 'float64_to_uint32' was not declared. Should it be static?
arch/arm/nwfpe/softfloat.c:1753:7: warning: symbol 'float64_to_uint32_round_to_zero' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 13:15:34 +01:00
Ben Dooks
e078761a0a [ARM] 4415/1: AML5900: fix sparse warnings from map_io
The map_io function does not need to be exported
from this file, and therefore should be declared
static.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 13:15:30 +01:00
Ben Dooks
0cc69daa3e [ARM] 4414/1: S3C2443: sparse fix for clock.c
Fix sparse warnings in the arch/arm/mach-s3c2443/clock.c,
including an bug in initialising the cf clock initialiser
where two values are being set for the ctrlbit.

arch/arm/mach-s3c2443/clock.c:397:12: warning: symbol 'clk_usb_bus_host' was not declared. Should it be static?
arch/arm/mach-s3c2443/clock.c:760:4: error: Initializer entry defined twice
arch/arm/mach-s3c2443/clock.c:761:4:   also defined here

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 13:15:26 +01:00
Ben Dooks
eca8c24241 [ARM] 4412/1: S3C2412: reset errata fix
The S3C2412 has an reset-errata where the clock
may cause a glitch switching back to EXTCLK. We
force a switch to EXTCLK before writing the
reset register to force use of the CLKCON sync
logic to properly switch.

Fix problem reported by Matthieu Castet.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 13:15:23 +01:00
Russell King
28c670cb9b [ARM] oprofile: avoid lockdep warnings on mpcore oprofile init
Fix lockdep warnings, caused by 'set_affinity' being called without
the correct locks taken and local interrupts disabled:

=================================
[ INFO: inconsistent lock state ]
2.6.22-rc2 #1
---------------------------------
inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
swapper/1 [HC0[0]:SC0[0]:HE1:SE1] takes:
(irq_controller_lock){++..}, at: [<c002be50>] gic_set_cpu+0x60/0xa0
{in-hardirq-W} state was registered at:
 [<c005d9a8>] lock_acquire+0x58/0x6c
 [<c0233068>] _spin_lock+0x40/0x50
 [<c002c020>] gic_mask_irq+0x2c/0x6c
 [<c0069c64>] handle_level_irq+0x11c/0x14c
 [<c0020060>] asm_do_IRQ+0x60/0x84
 [<c0020d2c>] __irq_svc+0x4c/0xc0
 [<c000ed84>] __alloc_bootmem_nopanic+0x74/0x88
 [<c000edb0>] __alloc_bootmem+0x18/0x3c
 [<c000fa00>] alloc_large_system_hash+0x16c/0x200
 [<c00108dc>] inode_init_early+0x5c/0xa4
 [<c00106dc>] vfs_caches_init_early+0x24/0xa0
 [<c0008e54>] start_kernel+0x220/0x2fc
 [<00008078>] 0x8078
irq event stamp: 88438
hardirqs last  enabled at (88438): [<c0020dc0>] preempt_return+0x20/0x2c
hardirqs last disabled at (88436): [<c00417bc>] __do_softirq+0xb0/0x138
softirqs last  enabled at (88437): [<c0041810>] __do_softirq+0x104/0x138
softirqs last disabled at (88428): [<c0041d9c>] irq_exit+0x68/0x7c

other info that might help us debug this:
no locks held by swapper/1.

stack backtrace:
[<c0025ecc>] (dump_stack+0x0/0x14) from [<c005b1e4>] (print_usage_bug+0x138/0x168)
[<c005b0ac>] (print_usage_bug+0x0/0x168) from [<c005be80>] (mark_lock+0x484/0x6a0)
[<c005b9fc>] (mark_lock+0x0/0x6a0) from [<c005cc48>] (__lock_acquire+0x3c0/0x10c8)
[<c005c888>] (__lock_acquire+0x0/0x10c8) from [<c005d9a8>] (lock_acquire+0x58/0x6c)
[<c005d950>] (lock_acquire+0x0/0x6c) from [<c0233068>] (_spin_lock+0x40/0x50)
[<c0233028>] (_spin_lock+0x0/0x50) from [<c002be50>] (gic_set_cpu+0x60/0xa0)
[<c002bdf0>] (gic_set_cpu+0x0/0xa0) from [<c01b04cc>] (em_route_irq+0x38/0x40)
[<c01b0494>] (em_route_irq+0x0/0x40) from [<c01b04ec>] (em_setup+0x18/0xa4)
[<c01b04d4>] (em_setup+0x0/0xa4) from [<c001570c>] (oprofile_arch_init+0x24/0xe8)
[<c00156e8>] (oprofile_arch_init+0x0/0xe8) from [<c0015640>] (oprofile_init+0x1c/0x64)
[<c0015624>] (oprofile_init+0x0/0x64) from [<c0008a20>] (kernel_init+0x154/0x368)
[<c00088cc>] (kernel_init+0x0/0x368) from [<c003ef34>] (do_exit+0x0/0x904)
oprofile: using arm/mpcore

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 13:15:15 +01:00
Russell King
5b10c8e436 [ARM] Fix stacktrace FP range checking
Fix an oops in the stacktrace code, caused by improper range checking.
We subtract 12 off 'fp' before testing to see if it's below the low
bound.  However, if 'fp' were zero before, it becomes a very large
positive number, causing this test to succeed where it should fail.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 13:15:12 +01:00
David Rientjes
b91d8a1205 [ARM] use __used attribute
Use the newly introduced __used attribute in place of the deprecated
__attribute_used__.  Functionally the same.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-30 13:15:06 +01:00