Commit Graph

98 Commits

Author SHA1 Message Date
Linus Torvalds
10fdfee7f7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 "The most notable item is addition of support for Synaptics RMI4
  protocol which is native protocol for all current Synaptics devices
  (touchscreens, touchpads).  In later releases we'll switch devices
  using HID and PS/2 protocol emulation to RMI4.

  You will also get:
   - BYD PS/2 touchpad protocol support for psmouse
   - MELFAS MIP4 Touchscreen driver
   - rotary encoder was moved away from legacy platform data and to
     generic device properties API, devm_* API, and can now handle
     encoders using more than 2 GPIOs
   - Cypress touchpad driver was switched to devm_* API and device
     properties
   - other assorted driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  ARM: pxa/raumfeld: use PROPERTY_ENTRY_INTEGER to define props
  Input: synaptics-rmi4 - using logical instead of bitwise AND
  Input: powermate - fix oops with malicious USB descriptors
  Input: snvs_pwrkey - fix returned value check of syscon_regmap_lookup_by_phandle()
  MAINTAINERS: add devicetree bindings to Input Drivers section
  Input: synaptics-rmi4 - add device tree support to the SPI transport driver
  Input: synaptics-rmi4 - add SPI transport driver
  Input: synaptics-rmi4 - add support for F30
  Input: synaptics-rmi4 - add support for F12
  Input: synaptics-rmi4 - add device tree support for 2d sensors and F11
  Input: synaptics-rmi4 - add support for 2D sensors and F11
  Input: synaptics-rmi4 - add device tree support for RMI4 I2C devices
  Input: synaptics-rmi4 - add I2C transport driver
  Input: synaptics-rmi4 - add support for Synaptics RMI4 devices
  Input: ad7879 - add device tree support
  Input: ad7879 - fix default x/y axis assignment
  Input: ad7879 - move header to platform_data directory
  Input: ts4800 - add hardware dependency
  Input: cyapa - fix for losing events during device power transitions
  Input: sh_keysc - remove dependency on SUPERH
  ...
2016-03-17 21:51:52 -07:00
Stefan Agner
4774f40093 Input: ad7879 - move header to platform_data directory
The header file is used by the SPI and I2C variant of the driver.
Therefore, move it to a more generic place under platform_data.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-03-08 10:51:10 -08:00
Linus Walleij
e0958405bc blackfin: extgpio: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: Sonic Zhang <sonic.zhang@analog.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: adi-buildroot-devel@lists.sourceforge.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19 09:51:43 +01:00
Bjorn Helgaas
288e6eaa06 gpio: Include linux/gpio.h instead of asm/gpio.h
Most arches have an asm/gpio.h that merely includes linux/gpio.h.  The
others select ARCH_HAVE_CUSTOM_GPIO_H, and when that's selected,
linux/gpio.h includes asm/gpio.h.

Therefore, code should include linux/gpio.h instead of including asm/gpio.h
directly.

Remove includes of asm/gpio.h, adding an include of linux/gpio.h when
necessary.

This is a follow-on to 7563bbf89d ("gpiolib/arches: Centralise
bolierplate asm/gpio.h").

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-16 00:20:03 +01:00
Steven Miao
c4a2c58d20 blackfin: cleanup board files
using IS_ENABLED() macro instead of defined(CONFIG_XXX) || defined(CONFIG_XXX_MODULE)

Signed-off-by: Steven Miao <realmz6@gmail.com>
2014-04-12 08:48:01 +08:00
Geert Uytterhoeven
7b779f0add blackfin: twi: Remove bogus #endif
arch/blackfin/mach-bf538/boards/ezkit.c:768:2: error: #endif without #if

Introduced by commit cf93feb3a0 ("blackfin:
twi: Move TWI peripheral pin request array to platform data"), which
removed the #if, but forgot about the #endif.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steven Miao <realmz6@gmail.com>
2013-05-07 18:26:28 +08:00
Sonic Zhang
f1a1d52508 blackfin: anomaly: add anomaly 16000030 for bf5xx
Drivers common to both bf5xx and bf60x chip families may use this anomaly id.
So add it to bf5xx header files also.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-12-13 15:22:03 +08:00
Sonic Zhang
cf93feb3a0 blackfin: twi: Move TWI peripheral pin request array to platform data
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21 14:55:00 +08:00
Sonic Zhang
de45083831 blackfin: license: Change ADI BSD license
Change ADI BSD license to standart 3 clause BSD license for some blackfin arch
code requested by ADI Legal.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21 14:54:30 +08:00
Sonic Zhang
c55c89e939 blackfin: twi: move twi bit mask macro to twi head file
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21 14:54:21 +08:00
Paul Gortmaker
fa83af7e8f blackfin: fix ifdef fustercluck in mach-bf538/boards/ezkit.c
This file has lots and lots of ifdef, around structure decls
and structure usages.  The failure issue was that we would
build the BF538-EZKIT_defconfig and get:

 arch/blackfin/mach-bf538/boards/ezkit.c:924:3: error: 'bfin_lq035q1_device'
 undeclared here (not in a function)

even though the same ifdef _appeared_ to enable both the struct
declaration and the code that used it.  Yet cpp was telling us we
didn't have the struct, but we still had the usage of it.

However, _appeared_ is the operative word.  After marking all the
anonymous #endif with their parent #ifdef config options, it was
_then_ clear that there was a misplaced #endif that was hiding
the struct declaration.

The real guts of the patch boils down to this:

-#endif
+#endif /* CONFIG_MTD_M25P80 */
+#endif /* CONFIG_SPI_BFIN5XX */
 [...]
-#endif  /* spi master and devices */

but since I had to tag the #endif with their respective #ifdef
options to find this misplaced SPI endif, it would be silly to
then go and delete them all.  So they stay.

Cc: Sonic Zhang <sonic.zhang@analog.com>
Cc: Bob Liu <lliubbo@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26 14:46:51 -04:00
Sonic Zhang
7d157fb02b blackfin: config: update macro SPI_BFIN in board file
Macro name for spi controller driver has been modified, so update default
board file accordingly.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09 10:26:15 +08:00
Sonic Zhang
edb0a6408a Blackfin: add serial TX IRQ in individual platform resource
The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips,
so move the values to the platform resources.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-11-14 17:11:25 +08:00
Mike Frysinger
9466a0510a Blackfin: bf538: pull gpio/port logic out of core hibernate paths
Re-architect how we save/restore the gpio/port logic that only pertains
to bf538/bf539 parts by pulling it out of the core code paths and pushing
it out to bf538-specific locations.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:30 -04:00
Mike Frysinger
979365ba4e Blackfin: update anomaly lists to latest public info
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:18 -04:00
Mike Frysinger
2f7d63f909 Blackfin: boards: clean up redundant/dead spi resources
The default for the Blackfin SPI driver is 8 bits and dma disabled,
so many of the bfin5xx_spi_chip resources are redundant.  So punt
those parts.

Further, drivers should themselves be declaring 16 bit transfers,
so for those that do, and for the ones which no longer do 16 bit
transfers, drop the bfin5xx_spi_chip resources.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:41 -04:00
Mike Frysinger
63917efc4f Blackfin: mach/bfin_serial_5xx.h: punt now-unused header
Now that the serial code has been unified in bfin_serial.h, and the
Blackfin UART driver pushed its resources to the boards files, we
don't need these headers anymore.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:01:55 -04:00
Mike Frysinger
93f1742c63 Blackfin: update anomaly lists to latest public info
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:08 -04:00
Mike Frysinger
3dd666067d Blackfin: clean up style in irq defines
These files had a lot of whitespace damage, mostly due to copying and
pasting original files that had damage.

The BF561 header also had a lot of unused CONFIG_DEF_xxx defines, so
punt them all.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger
6adc521e71 Blackfin: unify core IRQ definitions
Start a new common IRQ header and move all of the CEC pieces there.  This
lets the individual part headers worry just about its SIC defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger
a8b1988609 Blackfin: boards: add missing "static" to peripheral lists
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:25 -05:00
Sonic Zhang
e54b673081 Blackfin: sport_uart resources: remove unused secondary RX/TX pins
The SPORT/UART driver doesn't use the secondary channel pins, so don't
try and request them thus keeping other drivers from using them.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:20 -05:00
Mike Frysinger
10cdc1a78a Blackfin: unify pll.h headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:16 -05:00
Mike Frysinger
a2ce077ab3 Blackfin: drop asm/irq.h include from mach headers
These were only included because of the irq handling of the PLL funcs,
and those PLL funcs have been moved out into their own header now.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:10 -05:00
Mike Frysinger
1a5c226528 Blackfin: clean up mach header includes
The main asm/blackfin.h header will pull in mach/blackfin.h to get
all the fun Blackfin defines.  So having any of the sub-mach headers
trying to include asm/blackfin.h makes no sense -- punt it.

The mach/blackfin.h header takes care of including the part-specific
def headers which in turn will include any other needed def file.
Similarly, it takes care of pulling in the part-specific cdef header.
So move this logic out of the blackfin.h when necessary.

Further, make sure the cdef headers do not waste time including the
def headers again.

Since all parts need the common def/cdef headers, move this logic
out of the part-specific headers and into the mach/blackfin.h file.

Finally, we need to split the BF539 def header since the BF538 does
not have MXVR and we don't want to expose those MMRs.

So now all parts should have the same behavior:
	mach/blackfin.h
		asm/def_LPBlackfin.h
		part-specific def.h
		if ! asm
			asm/cdef_LPBlackfin.h
			part-specific cdef.h
And the sub def/cdef headers only tail into what they need.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:08 -05:00
Mike Frysinger
4de2bf8786 Blackfin: push gpio (port) defines into common headers
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:06 -05:00
Mike Frysinger
5e3bcf30d6 Blackfin: dma: constify MMR pointer array
The array of pointers is never written, so constify it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:05 -05:00
Mike Frysinger
9346dba556 Blackfin: standardize DMAC traffic control MMRs & MDMA MMRs
Use the same naming convention for DMA traffic MMRs (most were legacy
anyways) so we can avoid useless ifdef trees.

Same goes for MDMA names -- this actually allows us to undo a bunch of
ifdef redirects that existed for this purpose alone.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:05 -05:00
Mike Frysinger
b1524e29e3 Blackfin: bfin_serial.h: unify heavily duplicated serial code
Each Blackfin port has been duplicating UART structures and defines when
there really is no need for it.  So start a new bfin_serial.h header to
unify all these pieces and give ourselves a fresh start.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10 07:18:02 -05:00
Mike Frysinger
5d868212c4 Blackfin: bf538: add missing SIC_RVECT define
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 16:30:02 -04:00
Mike Frysinger
c5af5451fc Blackfin: boards: fix num_chipselect values for on-chip SPI buses
The num_chipselect field for on-chip Blackfin SPI buses is supposed to
be 1 larger than the number of actual CSs available.  This is because
the hardware starts counting at 1 and not 0.  There is a field for "CS0",
but it is marked as "reserved" everywhere.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:52 -04:00
Mike Frysinger
3d6437b35d Blackfin: punt short SPI MMR bit names
Now that the common header defines everything and the SPI drivers are
using it, we can drop these duplicated global namespace polluters.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22 03:48:27 -04:00
David Howells
3b139cdb37 Blackfin: Rename IRQ flags handling functions
Rename h/w IRQ flags handling functions to be in line with what is expected for
the irq renaming patch.  This renames local_*_hw() to hard_local_*() using the
following perl command:

	perl -pi -e 's/local_irq_(restore|enable|disable)_hw/hard_local_irq_\1/ or s/local_irq_save_hw([_a-z]*)[(]flags[)]/flags = hard_local_irq_save\1()/' `find arch/blackfin/ -name "*.[ch]"`

and then fixing up asm/irqflags.h manually.

Additionally, arch/hard_local_save_flags() and arch/hard_local_irq_save() both
return the flags rather than passing it through the argument list.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-07 14:08:52 +01:00
David Howells
3dcc1e7f9f Blackfin: Split PLL code from mach-specific cdef headers
Split the PLL control code from the Blackfin machine-specific cdef headers so
that the irqflags functions can be renamed without incurring a header loop.

Signed-off-by: David Howells <dhowells@redhat.com>
2010-10-07 14:08:49 +01:00
Mike Frysinger
ac0a5042be Blackfin: punt duplicate SPORT MMR defines
The common bfin_sport.h header now has unified definitions of these, so
stop polluting the global namespace.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-27 15:58:27 -04:00
Mike Frysinger
ba3f5973ce Blackfin: TWI: clean up the MMR names
The standard short name for control is CTL and not CTRL.  Use TWI0_xxx
even on parts that only have one TWI bus to keep things simple.  Drop
all the cdef helpers since the bus driver takes care of everything.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:55 -04:00
Mike Frysinger
812ae98f08 Blackfin: gpio/portmux: clean up whitespace corruption
Random tabs instead of spaces, mixes of the two, and unicode spaces
instead of ascii spaces.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:51 -04:00
Mike Frysinger
306208f40c Blackfin: add a GPIO_DEFAULT_BOOT_SPI_CS
This is parallel to the existing P_DEFAULT_BOOT_SPI_CS, but in terms of
the GPIO value so it can be used with the normal gpio API.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:49 -04:00
Mike Frysinger
dc7101bbae Blackfin: update anomaly lists to latest public info
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-08-06 12:55:46 -04:00
Mike Frysinger
def282d615 Blackfin: punt duplicated CAN MMRs
Now that there's a common header with everything unified, drop the defines
from the global namespace.  Pollution sucks.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21 09:34:37 -04:00
Michael Hennerich
f3dec78333 Blackfin: increase NR_IRQS beyond NR on-chip IRQs
This makes room for off-chip IRQ controllers.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:49 -05:00
Michael Hennerich
244d34230b Blackfin: update AD7879 resources to match the new gpiolib driver support
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Michael Hennerich
d94a1aa44e Blackfin: extend bfin-lq035q1-fb resources to include PPI mode
This lets us support the new BF527-EZKIT V2.1 via platform resources
tweaks only.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:46 -05:00
Sonic Zhang
c13ce9fd26 Blackfin: add UART/SPORT early platform resources
This lets people easily select the UART/SPORT consoles for early printk
while leveraging the pins declared in the boards file.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00
Sonic Zhang
df5de26130 Blackfin: move SPORT UART resources to boards files
Rather than keeping the pins in the actual driver and worrying about a
mess of Kconfig options, declare all the desired pin resources in the
boards file.  This lets people easily select the specific pins/ports for
the normal emulated UART as well as GPIOs for CTS/RTS.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00
Sonic Zhang
6bd1fbea2e Blackfin: move on-chip UART resources to boards files
Rather than keeping the pins in the actual driver and worrying about a
mess of Kconfig options, declare all the desired pin resources in the
boards file.  This lets people easily select the specific pins/ports for
the normal UART as well as GPIOs for CTS/RTS.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09 00:30:45 -05:00
Barry Song
706a01b1c6 Blackfin: bf537-stamp: add CAN resources
Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:16:38 -05:00
Mike Frysinger
00d2460454 Blackfin: unify DMA masks
Every Blackfin variant has the same DMA bit masks, so avoid duplicating
them over and over in each mach header.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:59 -05:00
Mike Frysinger
a8e8e49168 Blackfin: unify duplicated power masks
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:53 -05:00
Mike Frysinger
e153a97c21 Blackfin: punt unused MXVR masks
There are no MXVR device drivers, and if someday there is, we can put
these in a dedicated header rather than polluting the global namespace.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15 00:14:43 -05:00