Commit Graph

80 Commits

Author SHA1 Message Date
Steven Whitehouse
37fde8ca6c [GFS2] Uncomment sprintf_symbol calling code
Now that the patch from -mm has gone upstream, we can uncomment the code
in GFS2 which uses sprintf_symbol.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Robert Peterson <rpeterso@redhat.com>
2007-05-01 09:51:39 +01:00
Robert Peterson
5f8820960c [GFS2] lockdump improvements
The patch below consists of the following changes (in code order):

1. I fixed a minor compiler warning regarding the printing of
   a kernel symbol address.
2. I implemented a suggestion from Dave Teigland that moves
   the debugfs information for gfs2 into a subdirectory so
   we can easily expand our use of debugfs in the future.
   The current code keeps the glock information in:
   /debug/gfs2/<fs>
   With the patch, the new code keeps the glock information in:
   /debug/gfs2/<fs>/glock
   That will allow us to create more debugfs files in the future.
3. This fixes a bug whereby a failed mount attempt causes the
   debugfs file to not be deleted.  Failed mount attempts should
   always clean up after themselves, including deleting the
   debugfs file and/or directory.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:33 +01:00
Robert Peterson
7a0079d9e3 [GFS2] bz 236008: Kernel gpf doing cat /debugfs/gfs2/xxx (lock dump)
This is for Bugzilla Bug 236008: Kernel gpf doing cat /debugfs/gfs2/xxx
(lock dump) seen at the "gfs2 summit".  This also fixes the bug that caused
garbage to be printed by the "initialized at" field.  I apologize for the
kludge, but that code will all be ripped out anyway when the official
sprint_symbol function becomes available in the Linux kernel.  I also
changed some formatting so that spaces are replaced by proper tabs.

Signed-off-by: Robert Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:11:28 +01:00
Robert Peterson
04b933f27b [GFS2] Red Hat bz 228540: owner references
In Testing the previously posted and accepted patch for
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=228540
I uncovered some gfs2 badness.  It turns out that the current
gfs2 code saves off a process pointer when glocks is taken
in both the glock and glock holder structures.  Those
structures will persist in memory long after the process has
ended; pointers to poisoned memory.

This problem isn't caused by the 228540 fix; the new capability
introduced by the fix just uncovered the problem.

I wrote this patch that avoids saving process pointers
and instead saves off the process pid.  Rather than
referencing the bad pointers, it now does process lookups.
There is special code that makes the output nicer for
printing holder information for processes that have ended.

This patch also adds a stub for the new "sprint_symbol"
function that exists in Andrew Morton's -mm patch set, but
won't go into the base kernel until 2.6.22, since it adds
functionality but doesn't fix a bug.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:55 +01:00
Steven Whitehouse
420d2a1028 [GFS2] Fix a bug on i386 due to evaluation order
Since gcc didn't evaluate the last two terms of the expression in
glock.c:1881 as a constant expression, it resulted in an error on
i386 due to the lack of a 64bit divide instruction. This adds some
brackets to fix the problem.

This was reported by Andrew Morton.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
2007-05-01 09:10:42 +01:00
Steven Whitehouse
3b8249f617 [GFS2] Fix bz 224480 and cleanup glock demotion code
This patch prevents the printing of a warning message in cases where
the fs is functioning normally by handing off responsibility for
unlinked, but still open inodes, to another node for eventual deallocation.
Also, there is now an improved system for ensuring that such requests
to other nodes do not get lost. The callback on the iopen lock is
only ever called when i_nlink == 0 and when a node is unable to deallocate
it due to it still being in use on another node. When a node receives
the callback therefore, it knows that i_nlink must be zero, so we mark
it as such (in gfs2_drop_inode) in order that it will then attempt
deallocation of the inode itself.

As an additional benefit, queuing a demote request no longer requires
a memory allocation. This simplifies the code for dealing with gfs2_holders
as it removes one special case.

There are two new fields in struct gfs2_glock. gl_demote_state is the
state which the remote node has requested and gl_demote_time is the
time when the request came in. Both fields are only valid when the
GLF_DEMOTE flag is set in gl_flags.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:39 +01:00
Josef Whiter
5c7342d894 [GFS2] fix bz 231369, gfs2 will oops if you specify an invalid mount option
If you specify an invalid mount option when trying to mount a gfs2 filesystem,
gfs2 will oops.  The attached patch resolves this problem.

Signed-off-by: Josef Whiter <jwhiter@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:32 +01:00
Robert Peterson
7c52b166c5 [GFS2] Add gfs2_tool lockdump support to gfs2 (bz 228540)
The attached patch resolves bz 228540.  This adds the capability
for gfs2 to dump gfs2 locks through the debugfs file system.
This used to exist in gfs1 as "gfs_tool lockdump" but it's missing from
gfs2 because all the ioctls were stripped out.  Please see the bugzilla
for more history about the fix.  This patch is also attached to the bugzilla
record.

The patch is against Steve Whitehouse's latest nmw git tree kernel
(2.6.21-rc1) and has been tested on system trin-10.

Signed-off-by: Robert Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-05-01 09:10:29 +01:00
akpm@linux-foundation.org
95d97b7dd7 [GFS2] build fix
fs/gfs2/glock.c:2198: error: 'THIS_MODULE' undeclared here (not in a function)

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-03-07 14:03:25 -05:00
Steven Whitehouse
631c42e170 [GFS2] go_drop_bh is never used, so remove it
The ->go_drop_bh function is never used, so this removes it and the single
caller,

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-03-07 14:02:53 -05:00
Steven Whitehouse
61be084efc [GFS2] Put back semaphore to avoid umount problem
Dave Teigland fixed this bug a while back, but I managed to mistakenly
remove the semaphore during later development. It is required to avoid
the list of inodes changing during an invalidate_inodes call. I have
made it an rwsem since the read side will be taken frequently during
normal filesystem operation. The write site will only happen during
umount of the file system.

Also the bug only triggers when using the DLM lock manager and only then
under certain conditions as its timing related.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: David Teigland <teigland@redhat.com>
2007-02-05 13:38:14 -05:00
Steven Whitehouse
d043e1900c [GFS2] Fix typo in glock.c
This is a one letter typo fix in glock.c, spotted by Rob Kenna.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:41 -05:00
Steven Whitehouse
90101c3186 [GFS2] Compile fix for glock.c
This one liner got missed from the previous patch.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:35 -05:00
Steven Whitehouse
12132933c4 [GFS2] Remove queue_empty() function
This function is not longer required since we do not do recursive
locking in the glock layer. As a result all its callers can be
replaceed with list_empty() calls.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:32 -05:00
Steven Whitehouse
b5d32bead1 [GFS2] Tidy up glops calls
This patch doesn't make any changes to the ordering of the various
operations related to glocking, but it does tidy up the calls to the
glops.c functions to make the structure more obvious.

The two functions: gfs2_glock_xmote_th() and gfs2_glock_drop_th() can be
made static within glock.c since they are called by every set of glock
operations. The xmote_th and drop_th glock operations are then made
conditional upon those two routines existing and called from the
previously mentioned functions in glock.c respectively.

Also it can be seen that the go_sync operation isn't needed since it can
easily be replaced by calls to xmote_bh and drop_bh respectively. This
results in no longer (confusingly) calling back into routines in glock.c
from glops.c and also reducing the glock operations by one member.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:26 -05:00
Steven Whitehouse
1c0f4872dc [GFS2] Remove local exclusive glock mode
Here is a patch for GFS2 to remove the local exclusive flag. In
the places it was used, mutex's are always held earlier in the
call path, so it appears redundant in the LM_ST_SHARED case.

Also, the GFS2 holders were setting local exclusive in any case where
the requested lock was LM_ST_EXCLUSIVE. So the other places in the glock
code where the flag was tested have been replaced with tests for the
lock state being LM_ST_EXCLUSIVE in order to ensure the logic is the
same as before (i.e. LM_ST_EXCLUSIVE is always locally exclusive as well
as globally exclusive).

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:20 -05:00
Steven Whitehouse
6bd9c8c2fb [GFS2] Remove unused go_callback operation
This is never used, so we might as well remove it.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:17 -05:00
Steven Whitehouse
e5dab552c8 [GFS2] Remove the "greedy" function from glock.[ch]
The "greedy" code was an attempt to retain glocks for a minimum length
of time when they relate to mmap()ed files. The current implementation
of this feature is not, however, ideal in that it required allocating
memory in order to do this and its overly complicated.

It also misses the mark by ignoring the other I/O operations which are
just as likely to suffer from the same problem. So the plan is to remove
this now and then add the functionality back as part of the glock state
machine at a later date (and thus take into account all the possible
users of this feature)

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:14 -05:00
Steven Whitehouse
fee852e374 [GFS2] Shrink gfs2_inode memory by half
Here is something I spotted (while looking for something entirely
different) the other day.

Rather than using a completion in each and every struct gfs2_holder,
this removes it in favour of hashed wait queues, thus saving a
considerable amount of memory both on the stack (where a number of
gfs2_holder structures are allocated) and in particular in the
gfs2_inode which has 8 gfs2_holder structures embedded within it.

As a result on x86_64 the gfs2_inode shrinks from 2488 bytes to
1912 bytes, a saving of 576 bytes per inode (no thats not a typo!).
In actual practice we get a much better result than that since
now that a gfs2_inode is under the 2048 byte barrier, we get two
per 4k slab page effectively halving the amount of memory required
to store gfs2_inodes.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:11 -05:00
Steven Whitehouse
3699e3a44b [GFS2] Clean up/speed up readdir
This removes the extra filldir callback which gfs2 was using to
enclose an attempt at readahead for inodes during readdir. The
code was too complicated and also hurts performance badly in the
case that the getdents64/readdir call isn't being followed by
stat() and it wasn't even getting it right all the time when it
was.

As a result, on my test box an "ls" of a directory containing 250000
files fell from about 7mins (freshly mounted, so nothing cached) to
between about 15 to 25 seconds. When the directory content was cached,
the time taken fell from about 3mins to about 4 or 5 seconds.

Interestingly in the cached case, running "ls -l" once reduced the time
taken for subsequent runs of "ls" to about 6 secs even without this
patch. Now it turns out that there was a special case of glocks being
used for prefetching the metadata, but because of the timeouts for these
locks (set to 10 secs) the metadata was being timed out before it was
being used and this the prefetch code was constantly trying to prefetch
the same data over and over.

Calling "ls -l" meant that the inodes were brought into memory and once
the inodes are cached, the glocks are not disposed of until the inodes
are pushed out of the cache, thus extending the lifetime of the glocks,
and thus bringing down the time for subsequent runs of "ls"
considerably.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:37:04 -05:00
Linus Torvalds
1c1afa3c05 Merge master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
* master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (73 commits)
  [DLM] Clean up lowcomms
  [GFS2] Change gfs2_fsync() to use write_inode_now()
  [GFS2] Fix indent in recovery.c
  [GFS2] Don't flush everything on fdatasync
  [GFS2] Add a comment about reading the super block
  [GFS2] Mount problem with the GFS2 code
  [GFS2] Remove gfs2_check_acl()
  [DLM] fix format warnings in rcom.c and recoverd.c
  [GFS2] lock function parameter
  [DLM] don't accept replies to old recovery messages
  [DLM] fix size of STATUS_REPLY message
  [GFS2] fs/gfs2/log.c:log_bmap() fix printk format warning
  [DLM] fix add_requestqueue checking nodes list
  [GFS2] Fix recursive locking in gfs2_getattr
  [GFS2] Fix recursive locking in gfs2_permission
  [GFS2] Reduce number of arguments to meta_io.c:getbuf()
  [GFS2] Move gfs2_meta_syncfs() into log.c
  [GFS2] Fix journal flush problem
  [GFS2] mark_inode_dirty after write to stuffed file
  [GFS2] Fix glock ordering on inode creation
  ...
2006-12-07 09:13:20 -08:00
Randy Dunlap
0ac230699a [GFS2] lock function parameter
Fix function parameter typing:
fs/gfs2/glock.c💯 warning: function declaration isn't a prototype

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:37:18 -05:00
Steven Whitehouse
b004157ab5 [GFS2] Fix journal flush problem
This fixes a bug which resulted in poor performance due to flushing
the journal too often. The code path in question was via the inode_go_sync()
function in glops.c. The solution is not to flush the journal immediately
when inodes are ejected from memory, but batch up the work for glockd to
deal with later on. This means that glocks may now live on beyond the end of
the lifetime of their inodes (but not very much longer in the normal case).

Also fixed in this patch is a bug (which was hidden by the bug mentioned above) in
calculation of the number of free journal blocks.

The gfs2_logd process has been altered to be more responsive to the journal
filling up. We now wake it up when the number of uncommitted journal blocks
has reached the threshold level rather than trying to flush directly at the
end of each transaction. This again means doing fewer, but larger, log
flushes in general.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:36:42 -05:00
Steven Whitehouse
1a14d3a68f [GFS2] Simplify glops functions
The go_sync callback took two flags, but one of them was set on every
call, so this patch removes once of the flags and makes the previously
conditional operations (on this flag), unconditional.

The go_inval callback took three flags, each of which was set on every
call to it. This patch removes the flags and makes the operations
unconditional, which makes the logic rather more obvious.

Two now unused flags are also removed from incore.h.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:36:30 -05:00
Steven Whitehouse
ab923031ce [GFS2] Fix memory allocation in glock.c
Change from GFP_KERNEL to GFP_NOFS as this was causing a
slow down when trying to push inodes from cache.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:35:46 -05:00
Steven Whitehouse
c594d88664 [GFS2] Remove unused GL_DUMP flag
There is no way to set the GL_DUMP flag, and in any case the
same thing can be done with systemtap if required for debugging,
so this removes it.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:34:40 -05:00
Steven Whitehouse
b60623c238 [GFS2] Shrink gfs2_inode (3) - di_mode
This removes the duplicate di_mode field in favour of using the
inode->i_mode field. This saves 4 bytes.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:34:14 -05:00
David Howells
c4028958b6 WorkStruct: make allyesconfig
Fix up for make allyesconfig.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 14:57:56 +00:00
Steven Whitehouse
907b9bceb4 [GFS2/DLM] Fix trailing whitespace
As per Andrew Morton's request, removed trailing whitespace.

Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-25 09:26:04 -04:00
Fabio Massimo Di Nitto
7d308590ae [GFS2] Export lm_interface to kernel headers
lm_interface.h has a few out of the tree clients such as GFS1
and userland tools.

Right now, these clients keeps a copy of the file in their build tree
that can go out of sync.

Move lm_interface.h to include/linux, export it to userland and
clean up fs/gfs2 to use the new location.

Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-19 08:45:18 -04:00
Steven Whitehouse
a8336344a5 [GFS2] Fix glock hash clearing
A one liner bug fix to prevent the return value being
wrong when more than one superblock is mounted.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-14 13:57:38 -04:00
Steven Whitehouse
16feb9fec0 [GFS2] Use atomic_t rather than kref in glock.c
Use atomic_t as the ref count in glocks rather than a kref.
This is another step towards using RCU for the glock hash.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-13 10:43:37 -04:00
Steven Whitehouse
b6397893a5 [GFS2] Use hlist for glock hash chains
This results in smaller list heads, so that we can have more chains
in the same amount of memory (twice as many). I've multiplied the
size of the table by four though - this is because we are saving
memory by not having one lock per chain any more. So we land up
using about the same amount of memory for the hash table as we
did before I started these changes, the difference being that we
now have four times as many hash chains.

The reason that I say "about the same amount of memory" is that the
actual amount now depends upon the NR_CPUS and some of the config
variables, so that its not exact and in some cases we do use more
memory. Eventually we might want to scale the hash table size
according to the size of physical ram as measured on module load.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-12 10:10:01 -04:00
Steven Whitehouse
2426443460 [GFS2] Rewrite of examine_bucket()
The existing implementation of this function in glock.c was not
very efficient as it relied upon keeping a cursor element upon the
hash chain in question and moving it along. This new version improves
upon this by using the current element as a cursor. This is possible
since we only look at the "next" element in the list after we've
taken the read_lock() subsequent to calling the examiner function.
Obviously we have to eventually drop the ref count that we are then
left with and we cannot do that while holding the read_lock, so we
do that next time we drop the lock. That means either just before
we examine another glock, or when the loop has terminated.

The new implementation has several advantages: it uses only a
read_lock() rather than a write_lock(), so it can run simnultaneously
with other code, it doesn't need a "plug" element, so that it removes
a test not only from this list iterator, but from all the other glock
list iterators too. So it makes things faster and smaller.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-11 21:40:30 -04:00
Steven Whitehouse
94610610f1 [GFS2] Remove unused function from glock.c
The callback for iopen locks is unused, so this removes
it.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-09 18:59:27 -04:00
Steven Whitehouse
a5e08a9ef5 [GFS2] Add consts to glock sorting function
Add back the consts which were casted away in the glock sorting
function. Also add early exit code.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-09 17:07:05 -04:00
Steven Whitehouse
087efdd391 [GFS2] Make glock hash locks proportional to NR_CPUS
Make the number of locks used for hash chains in glock.c
proportional to NR_CPUS. Also move constants for the number
of hash chains into glock.c from incore.h since they are
not used outside of glock.c.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-09 16:59:11 -04:00
Steven Whitehouse
37b2fa6a24 [GFS2] Move rwlocks in glock.c into their own array
This splits the rwlocks guarding the hash chains of the glock hash
table into their own array. This will reduce memory usage in some
cases due to better alignment, although the real reason for doing it
is to allow the two tables to be different sizes in future (i.e.
the locks will be sized proportionally with the max number of CPUs
and the hash chains sized proportinally with the size of physical memory)

In order to allow this, the gl_bucket member of struct gfs2_glock has
now become gl_hash, so we record the hash rather than a pointer to the
bucket itself.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-08 13:35:56 -04:00
Steven Whitehouse
9b47c11d1c [GFS2] Use void * instead of typedef for locking module interface
As requested by Jan Engelhardt, this removes the typedefs in the
locking module interface and replaces them with void *. Also
since we are changing the interface, I've added a few consts
as well.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-08 10:17:58 -04:00
Steven Whitehouse
1c089c325d [GFS2] Remove one typedef
This removes one of the typedefs from the locking interface. It
is replaced by a forward declaration of the gfs2 superblock. The
other two are not so easy to solve since in their case, they
can refer to one of two possible structures.

Cc: David Teigland <teigland@redhat.com>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-07 15:50:20 -04:00
Steven Whitehouse
85d1da67f7 [GFS2] Move glock hash table out of superblock
There are several reasons why we want to do this:
 - Firstly its large and thus we'll scale better with multiple
   GFS2 fs mounted at the same time
 - Secondly its easier to scale its size as required (thats a plan
   for later patches)
 - Thirdly, we can use kzalloc rather than vmalloc when allocating
   the superblock (its now only 4888 bytes)
 - Fourth its all part of my plan to eventually be able to use RCU
   with the glock hash.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-07 14:40:21 -04:00
Steven Whitehouse
b8547856f9 [GFS2] Add gfs2 superblock to glock hash function
This is another patch preparing for sharing of the glock hash
table between different gfs2 mounts.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-07 13:12:27 -04:00
Steven Whitehouse
cd915493fc [GFS2] Change all types to uX style
This makes all fixed size types have consistent names.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04 12:49:07 -04:00
Steven Whitehouse
a91ea69ffd [GFS2] Align all labels against LH side
This makes everything consistent.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04 12:04:26 -04:00
Steven Whitehouse
5029996547 [GFS2] Tidy up locking code
As per Jan Engelhardt's second email, this removes some unused code,
and fixes up indenting in various places.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-04 09:49:55 -04:00
Steven Whitehouse
e9fc2aa091 [GFS2] Update copyright, tidy up incore.h
As per comments from Jan Engelhardt <jengelh@linux01.gwdg.de> this
updates the copyright message to say "version" in full rather than
"v.2". Also incore.h has been updated to remove forward structure
declarations which are not required.

The gfs2_quota_lvb structure has now had endianess annotations added
to it. Also quota.c has been updated so that we now store the
lvb data locally in endian independant format to avoid needing
a structure in host endianess too. As a result the endianess
conversions are done as required at various points and thus the
conversion routines in lvb.[ch] are no longer required. I've
moved the one remaining constant in lvb.h thats used into lm.h
and removed the unused lvb.[ch].

I have not changed the HIF_ constants. That is left to a later patch
which I hope will unify the gh_flags and gh_iflags fields of the
struct gfs2_holder.

Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-01 11:05:15 -04:00
Steven Whitehouse
899be4d3b7 [GFS2] Add superblock into key for glock lookups
This adds the superblock as a key for glock lookups. Since the glocks
are already stored in a per-superblock table, this has no effect at
the moment. Later on this will change though.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-30 12:50:28 -04:00
Steven Whitehouse
d6a5372768 [GFS2] Use const on glock lookup key
Use const for the glock name which is being used as a lookup key
in the glock hash table.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-30 11:16:23 -04:00
Steven Whitehouse
ec45d9f583 [GFS2] Use slab properly with glocks
We can take advantage of the slab allocator to ensure that all the list
heads and the spinlock (plus one or two other fields) are initialised
by slab to speed up allocation of glocks.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-30 10:36:52 -04:00
Steven Whitehouse
5e2b0613ed [GFS2] Remove unused code from glock layer
Remove the unused sync feature from glocks. This is currently done by
calling the required functions to sync pages/blocks directly so this
code isn't needed.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-30 09:38:30 -04:00