Commit Graph

1538 Commits

Author SHA1 Message Date
Stephen M. Cameron
2521610942 cciss: factor out cciss_getnodename
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:31 +02:00
Stephen M. Cameron
4c800eed9a cciss: factor out cciss_setintinfo
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:30 +02:00
Stephen M. Cameron
576e661c65 cciss: factor out cciss_getintinfo
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:29 +02:00
Stephen M. Cameron
0a25a5aee7 cciss: factor out cciss_getpciinfo
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:12:28 +02:00
Milan Broz
ee86273062 loop: add some basic read-only sysfs attributes
Create /sys/block/loopX/loop directory and provide these attributes:
 - backing_file
 - autoclear
 - offset
 - sizelimit

This loop directory is present only if loop device is configured.

To be used in util-linux-ng (and possibly elsewhere like udev rules)
where code need to get loop attributes from kernel (and not store
duplicate info in userspace).

Moreover loop ioctls are not even able to provide full backing
file info because of buffer limits.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-23 15:18:10 +02:00
Graeme Smecher
7a50d06e24 of: fix missing headers for of_address_to_resource() in MTD and SysACE drivers
The drivers for Xilinx' SystemACE and physically mapped MTDs were missing
prototypes for of_address_to_resource(). This patch adds the necessary
headers.

Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-17 13:16:47 -06:00
Linus Torvalds
58d4ea65b9 Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  mmc_spi: Fix unterminated of_match_table
  of/sparc: fix build regression from of_device changes
  of/device: Replace struct of_device with struct platform_device
2010-08-12 09:11:31 -07:00
Linus Torvalds
2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
Jens Axboe
a4cc14ec9f xen-blkfront: fix missing out label
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-08 21:50:05 -04:00
Lars Ellenberg
e7f52dfb4f drbd: revert "delay probes", feature is being re-implemented differently
It was a now abandoned attempt to throttle resync bandwidth
based on the delay it causes on the bulk data socket.
It has no userbase yet, and has been disabled by
9173465ccb51c09cc3102a10af93e9f469a0af6f already.
This removes the now unused code.

The basic feature, namely using up "idle" bandwith
of network and disk IO subsystem, with minimal impact
to application IO, is being reimplemented differently.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:53:57 +02:00
Philipp Reisner
85f4cc17a6 drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:53:57 +02:00
Philipp Reisner
6710a57603 drbd: Disable delay probes for the upcomming release
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:53:57 +02:00
Kulikov Vasiliy
f6c4c8e19a cpqarray: check put_user() result
put_user() may fail, if so return -EFAULT.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:53:03 +02:00
Jeremy Fitzhardinge
7901d14144 xen/blkfront: Use QUEUE_ORDERED_DRAIN for old backends
If there's no feature-barrier key in xenstore, then it means its a fairly
old backend which does uncached in-order writes, which means ORDERED_DRAIN
is appropriate.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07 18:52:53 +02:00
Jeremy Fitzhardinge
4dab46ff26 xen/blkfront: use tagged queuing for barriers
When barriers are supported, then use QUEUE_ORDERED_TAG to tell the block
subsystem that it doesn't need to do anything else with the barriers.
Previously we used ORDERED_DRAIN which caused the block subsystem to
drain all pending IO before submitting the barrier, which would be
very expensive.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07 18:52:53 +02:00
Stephen Hemminger
3b06c21e84 floppy: make controller const
The struct cont_t is just a set of virtual function pointers.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:31 +02:00
Julia Lawall
ad96a7a7ea drivers/block: use memdup_user
Use memdup_user when user data is immediately copied into the
allocated region.  Some checkpatch cleanups in nearby code.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@

-  to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+  to = memdup_user(from,size);
   if (
-      to==NULL
+      IS_ERR(to)
                 || ...) {
   <+... when != goto l1;
-  -ENOMEM
+  PTR_ERR(to)
   ...+>
   }
-  if (copy_from_user(to, from, size) != 0) {
-    <+... when != goto l2;
-    -EFAULT
-    ...+>
-  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Chirag Kantharia <chirag.kantharia@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:31 +02:00
Stephen M. Cameron
8112586063 cciss: cleanup interrupt_not_for_us
cciss: cleanup interrupt_not_for_us
In the case of MSI/MSIX interrutps, we don't need to check
if the interrupt is for us, and in the case of the intx interrupt
handler, when checking if the interrupt is for us, we don't need
to check if we're using MSI/MSIX, we know we're not.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:30 +02:00
Stephen M. Cameron
b2a4a43dba cciss: change printks to dev_warn, etc.
cciss: change printks to dev_warn, etc.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:30 +02:00
Stephen M. Cameron
6b4d96b878 cciss: separate cmd_alloc() and cmd_special_alloc()
cciss: separate cmd_alloc() and cmd_special_alloc()
cmd_alloc() took a parameter which caused it to either allocate
from a pre-allocated pool, or allocate using pci_alloc_consistent.
This parameter is always known at compile time, so this would
be better handled by breaking the function into two functions
and differentiating the cases by function names.  Same goes
for cmd_free().

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:30 +02:00
Stephen M. Cameron
f70dba8366 cciss: use consistent variable names
cciss: use consistent variable names
"h", for the hba structure and "c" for the command structures.
and get rid of trivial CCISS_LOCK macro.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:30 +02:00
Stephen M. Cameron
058a0f9f31 cciss: forbid hard reset of 640x boards
cciss: forbid hard reset of 640x boards
The 6402/6404 are two PCI devices -- two Smart Array controllers
-- that fit into one slot.  It is possible to reset them independently,
however, they share a battery backed cache module.  One of the pair
controls the cache and the 2nd one access the cache through the first
one.  If you reset the one controlling the cache, the other one will
not be a happy camper.  So we just forbid resetting this conjoined
mess.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:30 +02:00
Stephen M. Cameron
adfbc1ff34 cciss: sanitize max commands
cciss: sanitize max commands
Some controllers might try to tell us they support 0 commands
in performant mode.  This is a lie told by buggy firmware.
We have to be wary of this lest we try to allocate a negative
number of command blocks, which will be treated as unsigned,
and get an out of memory condition.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:30 +02:00
Stephen M. Cameron
a6528d0172 cciss: fix hard reset code.
cciss: Fix hard reset code.
Smart Array controllers newer than the P600 do not honor the
PCI power state method of resetting the controllers.  Instead,
in these cases we can get them to reset via the "doorbell" register.

This escaped notice until we began using "performant" mode because
the fact that the controllers did not reset did not normally
impede subsequent operation, and so things generally appeared to
"work".  Once the performant mode code was added, if the controller
does not reset, it remains in performant mode.  The code immediately
after the reset presumes the controller is in "simple" mode
(which previously, it had remained in simple mode the whole time).
If the controller remains in performant mode any code which presumes
it is in simple mode will not work.  So the reset needs to be fixed.

Unfortunately there are some controllers which cannot be reset by
either method. (eg. p800).  We detect these cases by noticing that
the controller seems to remain in performant mode even after a
reset has been attempted.  In those cases we ignore the controller,
as any commands outstanding on it will result in stale completions.
To sum up, we try to do a better job of resetting the controller if
"reset_devices" is set, and if it doesn't work, we ignore that
controller.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:30 +02:00
Stephen M. Cameron
83123cb11b cciss: factor out cciss_reset_devices()
cciss: factor out cciss_reset_devices()

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:12 +02:00
Stephen M. Cameron
8e93bf6d6c cciss: factor out cciss_find_cfg_addrs.
Rationale for this is that I will also need to use this code
in fixing kdump host reset code prior to having the hba structure.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:12 +02:00
Stephen M. Cameron
b993313540 cciss: factor out cciss_enter_performant_mode
cciss: factor out cciss_enter_performant_mode

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:12 +02:00
Stephen M. Cameron
0f8a6a1e7b cciss: factor out cciss_wait_for_mode_change_ack()
cciss: factor out cciss_wait_for_mode_change_ack()

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:11 +02:00
Stephen M. Cameron
fe3b7527db cciss: make cciss_put_controller_into_performant_mode as __devinit
cciss: make cciss_put_controller_into_performant_mode as __devinit

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:11 +02:00
Stephen M. Cameron
ff5f58f06d cciss: cleanup some debug ifdefs
cciss: cleanup some debug ifdefs

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:11 +02:00
Stephen M. Cameron
bfd63ee571 cciss: factor out cciss_p600_dma_prefetch_quirk()
cciss: factor out cciss_p600_dma_prefetch_quirk()

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:11 +02:00
Stephen M. Cameron
322e304c4d cciss: factor out cciss_enable_scsi_prefetch()
cciss: factor out cciss_enable_scsi_prefetch()

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:11 +02:00
Stephen M. Cameron
501b92cd6b cciss: factor out CISS_signature_present()
cciss: factor out CISS_signature_present()

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:11 +02:00
Stephen M. Cameron
afadbf4b95 cciss: factor out cciss_find_board_params
cciss: factor out cciss_find_board_params

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:11 +02:00
Stephen M. Cameron
da5503217d cciss: fix leak of ioremapped memory
cciss: fix leak of ioremapped memory
in cciss_pci_init error path.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:11 +02:00
Stephen M. Cameron
4809d0988f cciss: factor out cciss_find_cfgtables
cciss: factor out cciss_find_cfgtables

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:11 +02:00
Stephen M. Cameron
e99ba13627 cciss: factor out cciss_wait_for_board_ready()
cciss: factor out cciss_wait_for_board_ready()

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:11 +02:00
Stephen M. Cameron
d474830da6 cciss: factor out cciss_find_memory_BAR()
cciss: factor out cciss_find_memory_BAR()

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:10 +02:00
Stephen M. Cameron
dac5488a9e cciss: remove board_id parameter from cciss_interrupt_mode()
cciss: remove board_id parameter from cciss_interrupt_mode()

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:10 +02:00
Stephen M. Cameron
dd9c426e92 cciss: factor out cciss_board_disabled
cciss: factor out cciss_board_disabled

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:10 +02:00
Stephen M. Cameron
6539fa9b2e cciss: factor out cciss_lookup_board_id
cciss: factor out cciss_lookup_board_id

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:10 +02:00
Stephen M. Cameron
292e50dd39 cciss: save pdev pointer in per hba structure early to avoid passing it around so much.
cciss: save pdev pointer in per hba structure early to avoid passing it around so much.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:10 +02:00
Stephen M. Cameron
373b45f7b6 cciss: Set the performant mode bit in the scsi half of the driver
cciss: Set the performant mode bit in the scsi half of the driver
In a couple of places, the performant mode bit wasn't being set in
the scsi half of the driver, causing commands to seem to hang.  Use
enqueue_cmd_and_start_io() where appropriate.  This fixes a bug that

	echo engage scsi > /proc/driver/cciss/cciss0

would hang.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:10 +02:00
Daniel Stodden
d54142c71f blkfront: Klog the unclean release path
Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:51:21 +02:00
Daniel Stodden
7b32d1044a blkfront: Remove obsolete info->users
This is just bd_openers, protected by the bd_mutex.

Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:49:20 +02:00
Daniel Stodden
acfca3c622 blkfront: Remove obsolete info->users
This is just bd_openers, protected by the bd_mutex.

Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:47:26 +02:00
Daniel Stodden
fa1bd3591a blkfront: Lock blockfront_info during xbdev removal
Same approach as blkfront_closing:
 * Grab the bdev safely, holding the info mutex.
 * Zap xbdev safely, holding the info mutex.
 * Try bdev removal safely, holding bd_mutex.

Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07 18:45:27 +02:00
Daniel Stodden
7fd152f4b6 blkfront: Fix blkfront backend switch race (bdev release)
We cannot read backend state within bdev operations, because it risks
grabbing the state change before xenbus gets to do it.

Fixed by tracking deferral with a frontend switch to Closing. State
exposure isn't strictly necessary, but the backends won't mind.

For a 'clean' deferral this seems actually a more decent protocol than
raising errors.

Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:45:12 +02:00
Daniel Stodden
139617437a blkfront: Fix blkfront backend switch race (bdev open)
We need not mind if users grab a late handle on a closing disk. We
probably even should not. But we have to make sure it's not a dead
one already

Let the bdev deal with a gendisk deleted under its feet. Takes the
info mutex to decide a race against backend closing.

Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:38:43 +02:00
Daniel Stodden
b70f5fa043 blkfront: Lock blkfront_info when closing
The bdev .open/.release fops race against backend switches to Closing,
handled by the XenBus thread.

The original code attempted to serialize block device holders and
xenbus only via bd_mutex. This is insufficient, the info->bd pointer
may already be stale (or null) while xenbus tries to bump up the
refcount.

Protect blkfront_info with a dedicated mutex.

Signed-off-by: Daniel Stodden <daniel.stodden@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-07 18:38:43 +02:00