Commit Graph

22 Commits

Author SHA1 Message Date
Richard Cochran
2b8f0119b8 ixp4xx: support omicron ixp425 based boards
This patch adds board support for the DEVIXP, the MICCPT, and the
MIC256, which are three IXP425 based boards produced by OMICRON
electronics, GmbH.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-30 22:18:42 +02:00
Marc Zyngier
4d9be47f3d ixp4xx: base support for Arcom Vulcan
This patch adds some basic support for the Arcom Vulcan (ixp425 based).

Supported devices include:
- XR16L551 serial ports
- External watchdog
- Flash
- SRAM
- 1-wire id

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2010-05-27 13:02:42 +02:00
Krzysztof Hałasa
ed5b9fa0d1 IXP4xx: Extend PCI MMIO indirect address space to 1 GB.
IXP4xx CPUs can indirectly access the whole 4 GB PCI MMIO address space (using
the non-prefetch registers). Previously the available space depended on the CPU
variant, since one of the IXP43x platforms needed more than the usual 128 MB.
1 GB should be enough for everyone, and if not, we can trivially increase it.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-12-05 16:58:39 +01:00
Krzysztof Hałasa
11c79740d3 IXP4xx: support for Goramo MultiLink router platform.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-23 23:58:30 +02:00
Russell King
485bdde787 [ARM] dmabounce requires ZONE_DMA
Rather than having everything that needs DMABOUNCE also select
ZONE_DMA, arrange for DMABOUNCE to select it instead.  This is
far more sensible.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-17 14:00:43 +01:00
Rod Whitby
7e36e2f535 [ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board
The Freecom-FSG3 is a small network-attached-storage device with the
following feature set:

* Intel IXP422
* 4MB Flash (ixp4xx flash driver)
* 64MB RAM
* 4 USB 2.0 host ports (ehci and ohci drivers)
* 1 WAN (eth1) and 3 LAN (eth0) ethernet ports
  * Supported by the open source ixp4xx ethernet driver
* Via VT6421 disk controller (libata and sata-via drivers)
  * Internal hard disk (PATA supported, SATA not yet supported)
  * External SATA port (not yet supported)
* ISL1208 RTC chip
* Winbond 83782 temp sensor and fan controller
* MiniPCI slot

The ixp4xx_defconfig is also updated to support this device (the
leds-fsg driver is to be submitted separately via the leds tree after
this initial support is merged, as it depends on header gpio defines).

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04 10:03:59 +01:00
Krzysztof Halasa
82a96f5790 [ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features
This patch adds drivers for IXP4xx hardware Queue Manager and for
Network Processor Engines. Requires patch #4712 (reading/writing
CPU feature (aka fuse) bits).

Posted to linux-arm-kernel on 2 Dec 2007 and revised.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:15:25 +00:00
Imre Kaloz
dcdeeb21c0 [ARM] 4426/2: Netgear WG302 v2 and WAG302 v2 support
This patch provides support for the Netgear WG302 v2 and WAG302 v2 AccessPoint series.

This patch relies on the patch "Gateway 7001 series support" minimally, as they only have UART2 connected.

Updated to stay below the 80 char limit in uncompress.h

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Imre Kaloz
46918bd13b [ARM] 4425/2: Gateway 7001 series support
This patch provides support for the Gateway 7001 AccessPoint series.

Updated to stay below the 80 char limit in uncompress.h

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Deepak Saxena <dsaxena@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:12:15 +01:00
Michael-Luke Jones
e87a8e85e9 [ARM] 4404/1: Trivial IXP42x Kconfig cleanup
Avila and IXDP4xx support were separated in 2.6.21 so this comment
isn't correct any more.

Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-26 10:09:39 +01:00
Michael-Luke Jones
28bd3a0dcc [ARM] 4318/2: DSM-G600 Board Support
This patch adds support for the D-Link DSM-G600 Rev A.
This is an ARM XScale IXP4xx system relatively similar to
the NSLU2 and NAS-100D already supported by mainline. An
important difference is Gigabit Ethernet support using
the Via Velocity chipset.

This patch is the combined work of Michael Westerhof and
Alessandro Zummo, with contributions from Michael-Luke
Jones. This version addresses review comments from rmk
and Deepak Saxena.

Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Michael Westerhof <mwester@dls.net>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-05 10:06:49 +01:00
Ruslan V. Sushko
45fba0846f [ARM] 4311/1: ixp4xx: add KIXRP435 platform
Add Intel KIXRP435 Reference Platform based on IXP43x processor.
Fixed after review : access to cp15 removed in identification functions,
used access to global processor_id instead

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Signed-off-by: Ruslan  Sushko <rsushko@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21 20:51:55 +01:00
Michael-Luke Jones
0f18597195 [ARM] 4033/1: Add separate Avila board setup code
This patch adds support for the Gateworks Avila Network Platform in
a separate set of setup files to the IXDP425. This is necessary now
that a driver for the Avila CF card slot is available. It also adds
support for a minor variant on the Avila board known as the Loft,
which has a different number of maximum PCI devices.

Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-06 16:46:46 +00:00
Matt LaPlante
3cb2fccc5f Fix misc Kconfig typos
Fix various Kconfig typos.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-30 05:22:59 +01:00
Milan Svoboda
689391210a [ARM] 3612/1: make pci bus optional for ixp4xx platform
Patch from Milan Svoboda

IXP4XX platform can happily live without pci bus. This patch modifies
Kconfig to support this option and modifies Makefile so pci only files
are compiled only when pci is really selected.

Patch is tested and ixdp465 runs fine with or without the pci bus.--

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>Signed-off-by: Deepak Saxena <dsaxena@plexity.net>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25 22:12:12 +01:00
Egry Gabor
c41045a43a [ARM] Trivial typo fixes
Trivial typo fixes in Kconfig files (ARM).

Signed-off-by: Egry Gabor <gaboregry@t-online.hu>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-04 21:22:11 +01:00
Deepak Saxena
76bbb00288 [ARM] 3487/1: IXP4xx: Support non-PCI systems
Patch from Deepak Saxena

This patch allows for the addition of IXP4xx systems that do not make
use of the PCI interface by moving the CONFIG_PCI symbol selection to
be platform-specific instead of for all of IXP4xx. If at least one machine
with PCI support is built, the PCI code will be compiled in, but when
building !PCI, this will drastically shrink the kernel size.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-30 15:34:29 +01:00
Alessandro Zummo
e7fcdb79ec [ARM] 3355/1: NSLU2: remove propmt depends
Patch from Alessandro Zummo

The patch that would have made the NSLU2
kernel non compatible with other ixp4xx machs
never entered the kernel. So it is actually
safe to remove the prompt dependencies.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-08 23:45:12 +00:00
Rod Whitby
3145d8a6cc [ARM] 3215/1: Iomega NAS 100d (MACH_NAS100D) machine support
Patch from Rod Whitby

This patch adds support for a new arm/ixp4xx machine - the Iomega NAS 100d network attached storage product.  The NAS100D is a consumer device containing a 266MHz Intel IXP420 processor, 16MB of flash, 64MB of RAM, a 160Gb internal IDE hard disk, and 802.11b/g wireless on an Atheros mini-PCI card.

Work on porting the latest 2.6.x kernel to this device is being done by
the NSLU2-Linux project (the same team who maintains the port to the
Linksys NSLU2 device).  In particular, the majority of this patch was
authored by Alessandro Zummo, based on the work done for MACH_NSLU2
support by the NSLU2-Linux core team of developers.

MACH_NAS100D (as implemented by this patch) can be enabled in jumbo
ixp4xx kernels without any affect on the other machines supported by
that kernel.

This patch applies cleanly against 2.6.15-rc7 and should be trivial to
apply to later kernel versions. It does not depend upon any other
patches.

Modified files (and number of lines inserted):
 arch/arm/mach-ixp4xx/Kconfig           |    8
 arch/arm/mach-ixp4xx/Makefile          |    1
 include/asm-arm/arch-ixp4xx/hardware.h |    1
 include/asm-arm/arch-ixp4xx/irqs.h     |    9
 include/asm-arm/arch-ixp4xx/nas100d.h  |   75
 arch/arm/mach-ixp4xx/nas100d-pci.c     |   77
 arch/arm/mach-ixp4xx/nas100d-power.c   |   69
 arch/arm/mach-ixp4xx/nas100d-setup.c   |  133

-- Rod Whitby (NSLU2-Linux project lead)

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04 17:17:11 +00:00
Alessandro Zummo
a7918f39bb [ARM] 3140/1: NSLU2 machine support
Patch from Alessandro Zummo

This patch adds support for the LinkSys NSLU2 running with
both big and little-endian kernels. The LinkSys NSLU2 is
a cost engineered ARM, XScale 420 based system similar to
the the Intel IXDP425 evaluation board. It uses the
IXP4XX ARCH.

While this patch applies independently of other patches
the resultant kernel requires further patches to successfully
use onboard devices, including the onboard flash. Since these
patches are independent of this one they will be submitted
separately.

A defconfig is not included here because not all of
the required drivers are actually in the kernel.
We intend to provide one as soon as the patches
will be incorporated in mainstream.

This patch is the combined work of nslu2-linux.org

Signed-off-by: John Bowler <jbowler@acm.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10 14:05:04 +00:00
akpm@osdl.org
7aa52f5128 [PATCH] arm: fix help text for ixdp465
)


From: Russell King <rmk+lkml@arm.linux.org.uk>

For some reason, this help text was missed when the file was last audited
by the documentation referencing folk.  Fix this incorrect documentation
reference.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:23:56 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00