extern should not appear in C files. Also, the definitions
do not match the prototype currently, not sure what way you
want to go with this, I've switched the prototype to return
int, but I can see going to the void return as well.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
dump_pagetable() can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jakub Jelinek reported that some user-space code that relies on
kernel headers has built dependency on the sigcontext->eip/rip
register names - which have been unified in commit:
commit 742fa54a62
Author: H. Peter Anvin <hpa@zytor.com>
Date: Wed Jan 30 13:30:56 2008 +0100
x86: use generic register names in struct sigcontext
so give the old layout to user-space. This is not particularly
pretty, but it's an ABI so there's no danger of the two definitions
getting out of sync.
Reported-by: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
DEBUG_PAGEALLOC was not possible on 64-bit due to its early-bootup
hardcoded reliance on PSE pages, and the unrobustness of the runtime
splitup of large pages. The splitup ended in recursive calls to
alloc_pages() when a page for a pte split was requested.
Avoid the recursion with a preallocated page pool, which is used to
split up large mappings and gets refilled in the return path of
kernel_map_pages after the split has been done. The size of the page
pool is adjusted to the available memory.
This part just implements the page pool and the initialization w/o
using it yet.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Specifically the boot time page tables in a CONFIG_X86_PAE=y enabled
kernel are in PAE format.
early_ioremap is updated to use the standard page table accessors.
Clear any mappings beyond max_low_pfn from the boot page tables in
native_pagetable_setup_start because the initial mappings can extend
beyond the range of physical memory and into the vmalloc area.
Derived from patches by Eric Biederman and H. Peter Anvin.
[ jeremy@goop.org: PAE swapper_pg_dir needs to be page-sized fix ]
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika Penttilä <mika.penttila@kolumbus.fi>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add function definition and extern variables to asm-x86/acpi.h.
All of these are used in bus.c in ifdef(CONFIG_X86) sections, so are
only added to the x86 include headers. boot.c already includes acpi.h
so no changes are needed there.
Fixes the following:
arch/x86/kernel/acpi/boot.c:83:4: warning: symbol 'acpi_sci_flags' was not declared. Should it be static?
arch/x86/kernel/acpi/boot.c:84:5: warning: symbol 'acpi_sci_override_gsi' was not declared. Should it be static?
arch/x86/kernel/acpi/boot.c:421:13: warning: symbol 'acpi_pic_sci_set_trigger' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Adjust the definition of lookup_address to take an unsigned long
level argument. Adjust callers in xen/mmu.c that pass in a
dummy variable.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There isn't much value to always detecting the MFGPT timers on
Geode platforms; detection is only needed when something wants
to use the timers. Move the detection code so that it gets
called the first time a timer is allocated.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We need to be called from elsewhere, and this gets some #ifdefs out
of the .c file.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We had planned to use the 'owner' field for allowing re-allocation of
MFGPTs; however, doing it by module owner name isn't flexible enough. So,
drop this for now. If it turns out that we need timers in modules, we'll
need to come up with a scheme that matches the write-once fields of the
MFGPTx_SETUP register, and drops ponies from the sky.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Commit 2f569afd9c ("CONFIG_HIGHPTE vs.
sub-page page tables") caused some build breakage due to pgtable_t only
getting declared in the CONFIG_X86_PAE case.
Move the declaration outside the PAE section.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Background: I've implemented 1K/2K page tables for s390. These sub-page
page tables are required to properly support the s390 virtualization
instruction with KVM. The SIE instruction requires that the page tables
have 256 page table entries (pte) followed by 256 page status table entries
(pgste). The pgstes are only required if the process is using the SIE
instruction. The pgstes are updated by the hardware and by the hypervisor
for a number of reasons, one of them is dirty and reference bit tracking.
To avoid wasting memory the standard pte table allocation should return
1K/2K (31/64 bit) and 2K/4K if the process is using SIE.
Problem: Page size on s390 is 4K, page table size is 1K or 2K. That means
the s390 version for pte_alloc_one cannot return a pointer to a struct
page. Trouble is that with the CONFIG_HIGHPTE feature on x86 pte_alloc_one
cannot return a pointer to a pte either, since that would require more than
32 bit for the return value of pte_alloc_one (and the pte * would not be
accessible since its not kmapped).
Solution: The only solution I found to this dilemma is a new typedef: a
pgtable_t. For s390 pgtable_t will be a (pte *) - to be introduced with a
later patch. For everybody else it will be a (struct page *). The
additional problem with the initialization of the ptl lock and the
NR_PAGETABLE accounting is solved with a constructor pgtable_page_ctor and
a destructor pgtable_page_dtor. The page table allocation and free
functions need to call these two whenever a page table page is allocated or
freed. pmd_populate will get a pgtable_t instead of a struct page pointer.
To get the pgtable_t back from a pmd entry that has been installed with
pmd_populate a new function pmd_pgtable is added. It replaces the pmd_page
call in free_pte_range and apply_to_pte_range.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some arches (like alpha and ia64) already have a clean posix_types.h header.
This brings all the others in line by removing all references to __GLIBC__
(and some undocumented __USE_ALL).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set.
Not all architectures support the A.OUT binfmt, so the ELF binfmt should not
be permitted to go looking for A.OUT libraries to load in such a case. Not
only that, but under such conditions A.OUT core dumps are not produced either.
To make this work, this patch also does the following:
(1) Makes the existence of the contents of linux/a.out.h contingent on
CONFIG_ARCH_SUPPORTS_AOUT.
(2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT
core dumping code.
(3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline. This
is then included only where needed. This means that this bit of arch
code will be stored in the appropriate A.OUT binfmt module rather than
the core kernel.
(4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not
needed) and FRV.
This patch depends on the previous patch to move STACK_TOP[_MAX] out of
asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT
format is available.
[jdike@addtoit.com: uml: re-remove accidentally restored code]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're
required whether or not A.OUT format is available.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make sure that at least cmpxchg64_local is available on all architectures to use
for unsigned long long values.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Andi Kleen <ak@muc.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct user.u_ar0 is defined to contain a pointer offset on all
architectures in which it is defined (all architectures which define an
a.out format except SPARC.) However, it has a pointer type in the headers,
which is pointless -- <asm/user.h> is not exported to userspace, and it
just makes the code messy.
Redefine the field as "unsigned long" (which is the same size as a pointer
on all Linux architectures) and change the setting code to user offsetof()
instead of hand-coded arithmetic.
Cc: Linux Arch Mailing List <linux-arch@vger.kernel.org>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Håvard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
asm/elf.h, asm/page.h and asm/user.h don't export to userspace now, so we can
drop #ifdef __KERNEL__ for them.
[k.shutemov@gmail.com: remove #ifdef __KERNEL_]
Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do not export asm/user.h and linux/user.h during make headers_install.
Signed-off-by: Kirill A. Shutemov <k.shutemov@gmail.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset adds a flags variable to reserve_bootmem() and uses the
BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions
between crashkernel area and already used memory.
This patch:
Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE.
If that flag is set, the function returns with -EBUSY if the memory already
has been reserved in the past. This is to avoid conflicts.
Because that code runs before SMP initialisation, there's no race condition
inside reserve_bootmem_core().
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix powerpc build]
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: <linux-arch@vger.kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
And to go with it Dave's type checking x86 termios headers. I've updated
these as the original sent by Dave had some wrong types in it.
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lockdep just caught this one:
=================================
[ INFO: inconsistent lock state ]
2.6.24 #38
---------------------------------
inconsistent {in-softirq-W} -> {softirq-on-W} usage.
swapper/1 [HC0[0]:SC0[0]:HE1:SE1] takes:
(pgd_lock){-+..}, at: [<ffffffff8022a9ea>] mm_init+0x1da/0x250
{in-softirq-W} state was registered at:
[<ffffffffffffffff>] 0xffffffffffffffff
irq event stamp: 394559
hardirqs last enabled at (394559): [<ffffffff80267f0a>] get_page_from_freelist+0x30a/0x4c0
hardirqs last disabled at (394558): [<ffffffff80267d25>] get_page_from_freelist+0x125/0x4c0
softirqs last enabled at (393952): [<ffffffff80232f8e>] __do_softirq+0xce/0xe0
softirqs last disabled at (393945): [<ffffffff8020c57c>] call_softirq+0x1c/0x30
other info that might help us debug this:
no locks held by swapper/1.
stack backtrace:
Pid: 1, comm: swapper Not tainted 2.6.24 #38
Call Trace:
[<ffffffff8024e1fb>] print_usage_bug+0x18b/0x190
[<ffffffff8024f55d>] mark_lock+0x53d/0x560
[<ffffffff8024fffa>] __lock_acquire+0x3ca/0xed0
[<ffffffff80250ba8>] lock_acquire+0xa8/0xe0
[<ffffffff8022a9ea>] ? mm_init+0x1da/0x250
[<ffffffff809bcd10>] _spin_lock+0x30/0x70
[<ffffffff8022a9ea>] mm_init+0x1da/0x250
[<ffffffff8022aa99>] mm_alloc+0x39/0x50
[<ffffffff8028b95a>] bprm_mm_init+0x2a/0x1a0
[<ffffffff8028d12b>] do_execve+0x7b/0x220
[<ffffffff80209776>] sys_execve+0x46/0x70
[<ffffffff8020c214>] kernel_execve+0x64/0xd0
[<ffffffff8020901e>] ? _stext+0x1e/0x20
[<ffffffff802090ba>] init_post+0x9a/0xf0
[<ffffffff809bc5f6>] ? trace_hardirqs_on_thunk+0x35/0x3a
[<ffffffff8024f75a>] ? trace_hardirqs_on+0xba/0xd0
[<ffffffff8020c1a8>] ? child_rip+0xa/0x12
[<ffffffff8020bcbc>] ? restore_args+0x0/0x44
[<ffffffff8020c19e>] ? child_rip+0x0/0x12
turns out that pgd_lock has been used on 64-bit x86 in an irq-unsafe
way for almost two years, since commit 8c914cb704.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The declaration and implementation of __const_udelay use different
names for the parameter on a number of architectures:
include/asm-avr32/delay.h:15:extern void __const_udelay(unsigned long usecs);
arch/avr32/lib/delay.c:39:inline void __const_udelay(unsigned long xloops)
include/asm-sh/delay.h:15:extern void __const_udelay(unsigned long usecs);
arch/sh/lib/delay.c:22:inline void __const_udelay(unsigned long xloops)
include/asm-m32r/delay.h:15:extern void __const_udelay(unsigned long usecs);
arch/m32r/lib/delay.c:58:void __const_udelay(unsigned long xloops)
include/asm-x86/delay.h:16:extern void __const_udelay(unsigned long usecs);
arch/x86/lib/delay_32.c:82:inline void __const_udelay(unsigned long xloops)
arch/x86/lib/delay_64.c:46:inline void __const_udelay(unsigned long xloops)
The units of the parameter isn't usecs, so that name is definitely
wrong. It's also not exactly loops, so I suppose xloops is an OK
name.
This patch changes these names from usecs to xloops.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- All implementations can be __devinit
- The function prototypes were in asm/timex.h but they all must be the same,
so create a single declaration in linux/timex.h.
- uninline the sparc64 version to match the other architectures
- Don't bother #defining ARCH_HAS_READ_CURRENT_TIMER to a particular value.
[ezk@cs.sunysb.edu: fix build]
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(with Martin Schwidefsky <schwidefsky@de.ibm.com>)
The pgd/pud/pmd/pte page table allocation functions get a mm_struct pointer as
first argument. The free functions do not get the mm_struct argument. This
is 1) asymmetrical and 2) to do mm related page table allocations the mm
argument is needed on the free function as well.
[kamalesh@linux.vnet.ibm.com: i386 fix]
[akpm@linux-foundation.org: coding-syle fixes]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pgtable.h does not include highmem.h but uses various constants from
highmem.h. We cannot include highmem.h because highmem.h will in turn include
many other include files that also depend on pgtable.h
So move the definitions from highmem.h into pgtable.h.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This kills unused __clear_bit_string and find_next_zero_string (they
were used by only gart and calgary IOMMUs).
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wires up the new timerfd API to the x86 family.
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Global functions should include their prototypes.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fixes sparse warning:
arch/x86/kernel/cpu/intel.c:48:15: warning: symbol 'ppro_with_ram_bug' was not declared. Should it be static?
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
A few snuck back in to x86.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Now that the only user does it on its own remove the NUMAQ support macros
in io_32.h
The next step would be to convert the preprocessor mess to actually readable
standard inlines.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
numa.c is the only user of the {in,out}*_quad functions. And it has only a few call
sites. Change them to open code the magic NUMAQ port access.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Remove bogus reference to "Pentium-II erratum A13" and point to the
actual canonical source of information about what requirements x86
processors have for PAE pagetable updates.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rather than unconditionally reloading cr3, only do so if the pud we're
updating is within the active pgd.
This eliminates TLB flushes most of the time. The
performance-critical uses of pud_clear are during execve and exit, but
in those cases cr3 is referring to some other pagetable. The only
other use of pud_clear is during a large (1Gbyte+) munmap, and those
are sufficiently rare that a couple of cr3 reloads won't hurt.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Revert "defer cr3 reload when doing pud_clear()" since I'm going to
replace it.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move the CPU feature string names to a separate file (common to 32
and 64 bits); additionally, make <asm/cpufeature.h> includable by host
code in preparation for including the CPU feature strings in the boot
code.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The volatile keyword was removed from the clflush() prototype
in commit e34907ae180f4fe6c28bb4516c679c2f81b0c9ed; the comment there
states:
x86: remove volatile keyword from clflush.
the p parameter is an explicit memory reference, and is
enough to prevent gcc to being nasty here. The volatile
seems completely not needed.
This reflects incorrect understanding of the function of the volatile
keyword there. The purpose of the volatile keyword is informing gcc
that it is safe to pass a volatile pointer to this function.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the _ASM_EXTABLE macro from <asm/asm.h>, instead of open-coding
__ex_table entires in include/asm-x86/uaccess_64.h.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the _ASM_EXTABLE macro from <asm/asm.h>, instead of open-coding
__ex_table entires in include/asm-x86/uaccess_32.h.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the _ASM_EXTABLE macro from <asm/asm.h>, instead of open-coding
__ex_table entires in include/asm-x86/system.h.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the _ASM_EXTABLE macro from <asm/asm.h>, instead of open-coding
__ex_table entires in include/asm-x86/msr.h.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the _ASM_EXTABLE macro from <asm/asm.h>, instead of open-coding
__ex_table entires in include/asm-x86/i387.h.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the _ASM_EXTABLE macro from <asm/asm.h>, instead of open-coding
__ex_table entires in include/asm-x86/futex.h.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Instead of open-coding the __ex_table information at each callsite,
construct a common macro that can work regardless of CPU size.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Function do_timer_interrupt_hook() don't take argument regs,
and structure hrtimer_sleeper don't have member cb_pending.
So delete comments refering to these symbols.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Avoid section mismatch involving arch_register_cpu.
Marking arch_register_cpu as __init and removing the export
for non-hotplug-cpu configurations makes the following warning
go away:
Section mismatch in reference from the function
arch_register_cpu() to the function .devinit.text:register_cpu()
The function arch_register_cpu() references
the function __devinit register_cpu().
This is often because arch_register_cpu lacks a __devinit
annotation or the annotation of register_cpu is wrong.
The only external user of arch_register_cpu in the tree is
in drivers/acpi/processor_core.c where it is guarded by
ACPI_HOTPLUG_CPU (which depends on HOTPLUG_CPU).
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The exception fixup for the futex macros __futex_atomic_op1/2 and
futex_atomic_cmpxchg_inatomic() is missing an entry when the lock
prefix is replaced by a NOP via SMP alternatives.
Chuck Ebert tracked this down from the information provided in:
https://bugzilla.redhat.com/show_bug.cgi?id=429412
A possible solution would be to add another fixup after the
LOCK_PREFIX, so both the LOCK and NOP case have their own entry in the
exception table, but it's not really worth the trouble.
Simply replace LOCK_PREFIX with lock and keep those untouched by SMP
alternatives.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A userspace program may wish to set the mark for each packets its send
without using the netfilter MARK target. Changing the mark can be used
for mark based routing without netfilter or for packet filtering.
It requires CAP_NET_ADMIN capability.
Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
alpha: fix x86.git merge build error
ia64: on UP percpu variables are not small memory model
x86: fix arch/x86/kernel/test_nx.c modular build bug
s390: use generic percpu linux-2.6.git
POWERPC: use generic per cpu
ia64: use generic percpu
SPARC64: use generic percpu
percpu: change Kconfig to HAVE_SETUP_PER_CPU_AREA
modules: fold percpu_modcopy into module.c
x86: export copy_from_user_ll_nocache[_nozero]
x86: fix duplicated TIF on 64-bit
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (27 commits)
lguest: use __PAGE_KERNEL instead of _PAGE_KERNEL
lguest: Use explicit includes rateher than indirect
lguest: get rid of lg variable assignments
lguest: change gpte_addr header
lguest: move changed bitmap to lg_cpu
lguest: move last_pages to lg_cpu
lguest: change last_guest to last_cpu
lguest: change spte_addr header
lguest: per-vcpu lguest pgdir management
lguest: make pending notifications per-vcpu
lguest: makes special fields be per-vcpu
lguest: per-vcpu lguest task management
lguest: replace lguest_arch with lg_cpu_arch.
lguest: make registers per-vcpu
lguest: make emulate_insn receive a vcpu struct.
lguest: map_switcher_in_guest() per-vcpu
lguest: per-vcpu interrupt processing.
lguest: per-vcpu lguest timers
lguest: make hypercalls use the vcpu struct
lguest: make write() operation smp aware
...
Manual conflict resolved (maybe even correctly, who knows) in
drivers/lguest/x86/core.c
commit 7e9916040b
and commit eee3af4a2c
Both use the same TIF number (25) in thread_info_64.h.
This patch changes the TIF ids.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch moves kvm_fpu asm-x86/kvm.h to allow every architecture to
define an own representation used for KVM_GET_FPU/KVM_SET_FPU.
Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Acked-by: Zhang Xiantao <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
When executing a test program called "crashme", we found the KVM guest cannot
survive more than ten seconds, then encounterd kernel panic. The basic concept
of "crashme" is generating random assembly code and trying to execute it.
After some fixes on emulator insn validity judgment, we found it's hard to
get the current emulator handle the invalid instructions correctly, for the
#UD trap for hypercall patching caused troubles. The problem is, if the opcode
itself was OK, but combination of opcode and modrm_reg was invalid, and one
operand of the opcode was memory (SrcMem or DstMem), the emulator will fetch
the memory operand first rather than checking the validity, and may encounter
an error there. For example, ".byte 0xfe, 0x34, 0xcd" has this problem.
In the patch, we simply check that if the invalid opcode wasn't vmcall/vmmcall,
then return from emulate_instruction() and inject a #UD to guest. With the
patch, the guest had been running for more than 12 hours.
Signed-off-by: Feng (Eric) Liu <eric.e.liu@intel.com>
Signed-off-by: Sheng Yang <sheng.yang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Since gfn_to_page() is a sleeping function, and we want to make the core mmu
spinlocked, we need to pass the page from the walker context (which can sleep)
to the shadow context (which cannot).
[marcelo: avoid recursive locking of mmap_sem]
Signed-off-by: Avi Kivity <avi@qumranet.com>
Add a facility to report on accesses to the local apic tpr even if the
local apic is emulated in the kernel. This is basically a hack that
allows userspace to patch Windows which tends to bang on the tpr a lot.
Signed-off-by: Avi Kivity <avi@qumranet.com>
This paves the way for multiple architecture support. Note that while
ioapic.c could potentially be shared with ia64, it is also moved.
Signed-off-by: Avi Kivity <avi@qumranet.com>
The current cpuid management suffers from several problems, which inhibit
passing through the host feature set to the guest:
- No way to tell which features the host supports
While some features can be supported with no changes to kvm, others
need explicit support. That means kvm needs to vet the feature set
before it is passed to the guest.
- No support for indexed or stateful cpuid entries
Some cpuid entries depend on ecx as well as on eax, or on internal
state in the processor (running cpuid multiple times with the same
input returns different output). The current cpuid machinery only
supports keying on eax.
- No support for save/restore/migrate
The internal state above needs to be exposed to userspace so it can
be saved or migrated.
This patch adds extended cpuid support by means of three new ioctls:
- KVM_GET_SUPPORTED_CPUID: get all cpuid entries the host (and kvm)
supports
- KVM_SET_CPUID2: sets the vcpu's cpuid table
- KVM_GET_CPUID2: gets the vcpu's cpuid table, including hidden state
[avi: fix original KVM_SET_CPUID not removing nx on non-nx hosts as it did
before]
Signed-off-by: Dan Kenigsberg <danken@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves structures:
kvm_cpuid_entry
kvm_cpuid
from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Move structures:
kvm_sregs
kvm_msr_entry
kvm_msrs
kvm_msr_list
from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves structures:
kvm_segment
kvm_dtable
from include/linux/kvm.h to include/asm-x86/kvm.h
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves structure lapic_state from include/linux/kvm.h
to include/asm-x86/kvm.h
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves structure kvm_regs to include/asm-x86/kvm.h.
Each architecture will need to create there own version of this
structure.
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves structures:
kvm_pic_state
kvm_ioapic_state
to inclue/asm-x86/kvm.h.
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch moves sturct kvm_memory_alias from include/linux/kvm.h
to include/asm-x86/kvm.h. Also have include/linux/kvm.h include
include/asm/kvm.h.
Signed-off-by: Jerone Young <jyoung5@us.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Currently kvm provides hypercalls only for x86* architectures. To
provide hypercall infrastructure for other kvm architectures I split
kvm_para.h into a generic header file and architecture specific
definitions.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Use a standard list threaded through page->lru for maintaining the pgd
list on PAE. This is the same as 64-bit, and seems saner than using a
non-standard list via page->index.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
PAE mode requires that we reload cr3 in order to guarantee that
changes to the pgd will be noticed by the processor. This means that
in principle pud_clear needs to reload cr3 every time. However,
because reloading cr3 implies a tlb flush, we want to avoid it where
possible.
pud_clear() is only used in a couple of places:
- in free_pmd_range(), when pulling down a range of process address space, and
- huge_pmd_unshare()
In both cases, the calling code will do a a tlb flush anyway, so
there's no need to do it within pud_clear().
In free_pmd_range(), the pud_clear is immediately followed by
pmd_free_tlb(); we can hook that to make the mmu_gather do an
unconditional full flush to make sure cr3 gets reloaded.
In huge_pmd_unshare, it is followed by flush_tlb_range, which always
results in a full cr3-reload tlb flush.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: William Irwin <wli@holomorphy.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds a new configuration option, which adds support for a new
early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch()
to decide wether OHCI-1394 FireWire controllers should be initialized and
enabled for physical DMA access to allow remote debugging of early problems
like issues ACPI or other subsystems which are executed very early.
If the config option is not enabled, no code is changed, and if the boot
paramenter is not given, no new code is executed, and independent of that,
all new code is freed after boot, so the config option can be even enabled
in standard, non-debug kernels.
With specialized tools, it is then possible to get debugging information
from machines which have no serial ports (notebooks) such as the printk
buffer contents, or any data which can be referenced from global pointers,
if it is stored below the 4GB limit and even memory dumps of of the physical
RAM region below the 4GB limit can be taken without any cooperation from the
CPU of the host, so the machine can be crashed early, it does not matter.
In the extreme, even kernel debuggers can be accessed in this way. I wrote
a small kgdb module and an accompanying gdb stub for FireWire which allows
to gdb to talk to kgdb using remote remory reads and writes over FireWire.
An version of the gdb stub fore FireWire is able to read all global data
from a system which is running a a normal kernel without any kernel debugger,
without any interruption or support of the system's CPU. That way, e.g. the
task struct and so on can be read and even manipulated when the physical DMA
access is granted.
A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt
and I've put a copy online at
ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt
It also has links to all the tools which are available to make use of it
another copy of it is online at:
ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff
Signed-Off-By: Bernhard Kaindl <bk@suse.de>
Tested-By: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In x86 PAE mode, stop treating pmds as a special case. Previously
they were always allocated and freed with the pgd. The modifies the
code to be the same as 64-bit mode, where they are allocated on
demand.
This is a step on the way to unifying 32/64-bit pagetable allocation
as much as possible.
There is a complicating wart, however. When you install a new
reference to a pmd in the pgd, the processor isn't guaranteed to see
it unless you reload cr3. Since reloading cr3 also has the
side-effect of flushing the tlb, this is an expense that we want to
avoid whereever possible.
This patch simply avoids reloading cr3 unless the update is to the
current pagetable. Later patches will optimise this further.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: William Irwin <wli@holomorphy.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Yes! A mere 120 c_p_a() fixing and rewriting patches later,
we are now confident that we can enable UC by default for
ioremap(), on x86 too.
Every other architectures was doing this already. Doing so
makes Linux more robust against MTRR mixups (which might go
unnoticed if BIOS writers test other OSs only - where PAT
might override bad MTRRs defaults).
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Latest update; I now have 4 NX tests, but 2 fail so they're #if 0'd.
I also cleaned up the NX test code quite a bit, and got rid of the ugly
exception table sorting stuff.
From: Arjan van de Ven <arjan@linux.intel.com>
This patch adds testcases for the CONFIG_DEBUG_RODATA configuration option
as well as the NX CPU feature/mappings. Both testcases can move to tests/
once that patch gets merged into mainline.
(I'm half considering moving the rodata test into mm/init.c but I'll
wait with that until init.c is unified)
As part of this I had to fix a not-quite-right alignment in the vmlinux.lds.h
for the RODATA sections, which lead to 1 page less being marked read only.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The set_memory_* and set_pages_* family of API's currently requires the
callers to do a global tlb flush after the function call; forgetting this is
a very nasty deathtrap. This patch moves the global tlb flush into
each of the callers
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
change_page_attr_add is only used in pageattr.c now, so we can
make this function static.
change_page_attr() isn't used anywere at all anymore; this function
is a really bad API anyway so just remove the bloat entirely.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
page_is_ram has a FIXME since ages, which reminds to sanity check the
BIOS area between 640k and 1M, which is sometimes falsely reported as
RAM in the e820 tables.
Implement the sanity check. Move the BIOS range defines from
pageattr.c into e820.h to avoid duplicate defines.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>