Commit Graph

103 Commits

Author SHA1 Message Date
Ksenija Stanojevic
305b37bd01 misc: Move panel driver out of staging
Move panel driver from drivers/staging/panel to drivers/misc.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-03 14:14:22 -08:00
Tim Bird
1f26d1c105 ARM: qcom: Add coincell charger driver
This driver is used to configure the coincell charger found in
Qualcomm PMICs.

The driver allows configuring the current-limiting resistor for
the charger, as well as the voltage to apply to the coincell
(or capacitor) when charging.

Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-29 13:37:18 -07:00
Ira Snyder
0d09f1a54d misc: remove drivers for CARMA hardware
The CARMA project has ended, and the hardware has all been moved into
storage. It is unlikely to ever be used again.

Remove the drivers so that there is no more maintenance burden from
ongoing upstream kernel changes.

Signed-off-by: Ira W. Snyder <ira.snyder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24 12:11:55 -07:00
Ian Munsie
10542ca015 cxl: Add base builtin support
This adds the base cxl support that cannot be built as a module. Specifically
it adds the cxl callbacks that are called from the core powerpc mm code which
must always exist irrespective of if the cxl module is loaded or not. This is
similar to how cell works with CONFIG_SPU_BASE.

This adds a cxl_slbia() call (similar to spu_flush_all_slbs()) which checks if
the cxl module is loaded and in use, returning immediately if it is not. If it
is in use it calls into the cxl SLB invalidation code.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-08 20:15:56 +11:00
Alexandre Belloni
f2a70e1fc1 misc: atmel_pwm: remove obsolete driver
The misc/atmel_pwm is not used by any mainlined boards and has been replaced by
the pwm-driver using the generic PWM framework.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09 15:14:35 +02:00
Pawel Moll
974cc7b934 mfd: vexpress: Define the device as MFD cells
This patch - finally, after over 6 months! :-( - addresses
Samuel's request to split the vexpress-sysreg driver into
smaller portions and define the device in a form of MFD
cells:

* LEDs code has been completely removed and replaced with
  "gpio-leds" nodes in the tree (referencing dedicated
  GPIO subnodes in sysreg - bindings documentation updated);
  this also better fits the reality as some variants of the
  motherboard don't have all the LEDs populated

* syscfg bridge code has been extracted into a separate
  driver (placed in drivers/misc for no better place)

* all the ID & MISC registers are defined as sysconf
  making them available for other drivers should they need
  to use them (and also to the user via /sys/kernel/debug/regmap
  which can be helpful in platform debugging)

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15 17:02:19 +01:00
Greg Kroah-Hartman
6e2055a9e5 staging: echo: move to drivers/misc/
The code is clean, there are users of it, so it doesn't belong in
staging anymore, move it to drivers/misc/.

Cc: Steve Underwood <steveu@coppice.org>
Cc: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 14:08:42 -08:00
Frank Haverkamp
76f5adbcb3 GenWQE Enable driver
Enable possiblity to configure and build this driver.

Signed-off-by: Frank Haverkamp <haver@linux.vnet.ibm.com>
Co-authors: Joerg-Stephan Vogt <jsvogt@de.ibm.com>,
            Michael Jung <MIJUNG@de.ibm.com>,
            Michael Ruettger <michael@ibmra.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-18 16:51:15 -08:00
Linus Torvalds
0bde7294e2 pwm: Changes for v3.13-rc1
Mostly bug fixes and clean up. There is a new driver, which is actually
 moving a custom PWM driver from drivers/misc.
 
 The majority of the patches are enhancements to the device tree support
 in the pwm-backlight driver. Backlights can now additionally be powered
 using a regulator and enabled using a GPIO in addition to just the PWM
 input.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSh1s7AAoJEN0jrNd/PrOhdS4P/1A/Tx05pP0ACsizhkB4Ro02
 XgjIusWw/jp+3LWXrlaReVNb5H6GlahDT5+2/ApAw06o7INGvpSzyI1fuFQ2DU6K
 L7MgWDSifeL7jiwfUq5f3Qv4Vccjgii0z4BBQI5ZpPluIzKpo2uhz7gIjBR3wPu9
 i34bc902SL/DrlvbMUsRHlYT9Ok3TpsPynk0pmw8xrUZDqRAX7DZH0EmvMkVsDo2
 T1vt9gQVTFVgIwlRUBcbrjbu1GnYaV20s+piQhYm1RMSUqY+ArldWKzEzlN3tLYc
 XdnkaLikdHDRBA4DeNPJGbPU8LQax8wCTaZa1PgT0PqjNX/dCkg3hsc1Em0dH9Zh
 PKvyX8R6iPdOcakkRm4qdVIacblqE1HYM7T+lyVhu6XP7MWkUmNr05HQBFjhOMcm
 whv1gS/EeB4y/FcSzn7S23UAmOvxiWfGnOMlnazrOgS00FrbC4accgSB/iXi2lDC
 szO9MHwfbwDTp8WBLEw8iTPODpq7pnFcBCw80pzblMFqC8v1MAFyriwT7BUmKcR/
 h/V75Q95VPAKq+uKsfb5Ruwa9CGKs8ACagLR0BuErT/J83Q7Q4Ezf56FUCvrGDtz
 5AWpGUakotwHtJPx6TAOgI+237MFh/GpIOrlEtz+2b5SP6ftHxr8rj+wg1sxmI2y
 JohOUIFjHtcA4UifhlTU
 =CB+z
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm changes from Thierry Reding:
 "Mostly bug fixes and clean up.  There is a new driver, which is
  actually moving a custom PWM driver from drivers/misc.

  The majority of the patches are enhancements to the device tree
  support in the pwm-backlight driver.  Backlights can now additionally
  be powered using a regulator and enabled using a GPIO in addition to
  just the PWM input"

* tag 'pwm/for-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (30 commits)
  Documentation/pwm: Update supported SoC name for pwm-samsung
  pwm: samsung: Fix kernel warning while unexporting a channel
  MAINTAINERS: Move PWM subsystem tree to kernel.org
  Documentation/pwm: Fix trivial typos
  pwm-backlight: Remove unused variable
  pwm_backlight: avoid short blank screen while doing hibernation
  pwm-backlight: Fix brightness adjustment
  pwm: add ep93xx PWM support
  pwm-backlight: Allow for non-increasing brightness levels
  pwm-backlight: Add power supply support
  pwm-backlight: Use new enable_gpio field
  unicore32: Initialize PWM backlight enable_gpio field
  ARM: shmobile: Initialize PWM backlight enable_gpio field
  ARM: SAMSUNG: Initialize PWM backlight enable_gpio field
  ARM: pxa: Initialize PWM backlight enable_gpio field
  ARM: OMAP: Initialize PWM backlight enable_gpio field
  pwm-backlight: Add optional enable GPIO
  pwm-backlight: Track enable state
  pwm-backlight: Refactor backlight power on/off
  pwm-backlight: Improve readability
  ...
2013-11-16 12:21:40 -08:00
H Hartley Sweeten
a230869817 pwm: add ep93xx PWM support
Remove the non-standard EP93xx PWM driver in drivers/misc and add
a new driver for the PWM controllers on the EP93xx platform based
on the PWM framework.

These PWM controllers each support 1 PWM channel with programmable
duty cycle, frequency, and polarity inversion.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-17 16:07:19 +02:00
Sudeep Dutt
b170d8ce3f Intel MIC Host Driver for X100 family.
This patch enables the following:
a) Initializes the Intel MIC X100 PCIe devices.
b) Provides sysfs entries for family and stepping information.

Co-author: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Caz Yokoyama <Caz.Yokoyama@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Harshavardhan R Kharche <harshavardhan.r.kharche@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Reviewed-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26 13:49:23 -07:00
Philipp Zabel
4984c6f5e5 misc: generic on-chip SRAM allocation driver
This driver requests and remaps a memory region as configured in the
device tree.  It serves memory from this region via the genalloc API.  It
optionally enables the SRAM clock.

Other drivers can retrieve the genalloc pool from a phandle pointing to
this drivers' device node in the device tree.

The allocation granularity is hard-coded to 32 bytes for now, to make the
SRAM driver useful for the 6502 remoteproc driver.  There is overhead for
bigger SRAMs, where only a much coarser allocation granularity is needed:
At 32 bytes minimum allocation size, a 256 KiB SRAM needs a 1 KiB bitmap
to track allocations.

[akpm@linux-foundation.org: fix Kconfig text, make sram_init static]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Michal Simek <monstr@monstr.eu>
Cc: Dong Aisheng <dong.aisheng@linaro.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Shijie <shijie8@gmail.com>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Matt Porter <mporter@ti.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:13 -07:00
Jiri Kosina
54f69b92f0 dummy-irq: introduce a dummy IRQ handler driver
This module accepts a single 'irq' parameter, which it should register for.

Its sole purpose is to help with debugging of IRQ sharing problems, by
force-enabling IRQ that would otherwise be disabled.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25 13:22:32 -07:00
Paul Bolle
61084d9927 misc: Remove max8997-muic.o Makefile line again
Commit 20259849bb ("VMCI: Some header and
config files.") readded this Makefile line. Remove it again.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15 11:12:38 -07:00
Stefan Roese
781551df57 misc: Add Lattice ECP3 FPGA configuration via SPI
This patch adds support for bitstream configuration (programming /
loading) of the Lattice ECP3 FPGA's via the SPI bus.

Here an example on my custom MPC5200 based board:

$ echo 1 > /sys/class/firmware/spi0.0/loading
$ cat fpga_a4m2k.bit > /sys/class/firmware/spi0.0/data
$ echo 0 > /sys/class/firmware/spi0.0/loading

leads to these messages:

lattice-ecp3 spi0.0: FPGA Lattice ECP3-35 detected
lattice-ecp3 spi0.0: Configuring the FPGA...
lattice-ecp3 spi0.0: FPGA succesfully configured!

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 10:25:03 -08:00
George Zhang
20259849bb VMCI: Some header and config files.
VMCI head config patch Adds all the necessary files to enable building of the VMCI
module with the Linux Makefiles and Kconfig systems. Also adds the header files used
for building modules against the driver.

Signed-off-by: George Zhang <georgezhang@vmware.com>
Acked-by: Andy king <acking@vmware.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-08 16:15:57 -08:00
Thierry Reding
6173f8f4ed pwm: Move AB8500 PWM driver to PWM framework
This commit moves the driver to drivers/pwm and converts it to the new
PWM framework.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arun Murthy <arun.murthy@stericsson.com>
2012-09-20 12:52:03 +02:00
John W. Linville
ce8126c334 iwmc3200top: remove driver for unavailable hardware
This hardware never became available to normal humans.  Leaving this
driver imposes unwelcome maintenance costs for no clear benefit.

Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-07-11 15:40:22 -04:00
Linus Torvalds
fb09bafda6 Staging tree pull request for 3.5-rc1
Here is the big staging tree pull request for the 3.5-rc1 merge window.
 
 Loads of changes here, and we just narrowly added more lines than we
 added:
  622 files changed, 28356 insertions(+), 26059 deletions(-)
 
 But, good news is that there is a number of subsystems that moved out of
 the staging tree, to their respective "real" portions of the kernel.
 
 Code that moved out was:
 	- iio core code
 	- mei driver
 	- vme core and bridge drivers
 
 There was one broken network driver that moved into staging as a step
 before it is removed from the tree (pc300), and there was a few new
 drivers added to the tree:
 	- new iio drivers
 	- gdm72xx wimax USB driver
 	- ipack subsystem and 2 drivers
 
 All of the movements around have acks from the various subsystem
 maintainers, and all of this has been in the linux-next tree for a
 while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7q8MACgkQMUfUDdst+ymjogCguo8fANFVlPWeZGeoBTL+aQfQ
 yTkAoLE0codmh+2SvhulYgyU1Wh6ZDK2
 =nJ2F
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging tree changes from Greg Kroah-Hartman:
 "Here is the big staging tree pull request for the 3.5-rc1 merge
  window.

  Loads of changes here, and we just narrowly added more lines than we
  added:
   622 files changed, 28356 insertions(+), 26059 deletions(-)

  But, good news is that there is a number of subsystems that moved out
  of the staging tree, to their respective "real" portions of the
  kernel.

  Code that moved out was:
	- iio core code
	- mei driver
	- vme core and bridge drivers

  There was one broken network driver that moved into staging as a step
  before it is removed from the tree (pc300), and there was a few new
  drivers added to the tree:
	- new iio drivers
	- gdm72xx wimax USB driver
	- ipack subsystem and 2 drivers

  All of the movements around have acks from the various subsystem
  maintainers, and all of this has been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up various trivial conflicts, along with a non-trivial one found
in -next and pointed out by Olof Johanssen: a clean - but incorrect -
merge of the arch/arm/boot/dts/at91sam9g20.dtsi file.  Fix up manually
as per Stephen Rothwell.

* tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (536 commits)
  Staging: bcm: Remove two unused variables from Adapter.h
  Staging: bcm: Removes the volatile type definition from Adapter.h
  Staging: bcm: Rename all "INT" to "int" in Adapter.h
  Staging: bcm: Fix warning: __packed vs. __attribute__((packed)) in Adapter.h
  Staging: bcm: Correctly format all comments in Adapter.h
  Staging: bcm: Fix all whitespace issues in Adapter.h
  Staging: bcm: Properly format braces in Adapter.h
  Staging: ipack/bridges/tpci200: remove unneeded casts
  Staging: ipack/bridges/tpci200: remove TPCI200_SHORTNAME constant
  Staging: ipack: remove board_name and bus_name fields from struct ipack_device
  Staging: ipack: improve the register of a bus and a device in the bus.
  staging: comedi: cleanup all the comedi_driver 'detach' functions
  staging: comedi: remove all 'default N' in Kconfig
  staging: line6/config.h: Delete unused header
  staging: gdm72xx depends on NET
  staging: gdm72xx: Set up parent link in sysfs for gdm72xx devices
  staging: drm/omap: initial dmabuf/prime import support
  staging: drm/omap: dmabuf/prime mmap support
  pstore/ram: Add ECC support
  pstore/ram: Switch to persistent_ram routines
  ...
2012-05-22 16:34:21 -07:00
Linus Torvalds
5d4e2d08e7 Driver core pull for 3.5-rc1
Here's the driver core, and other driver subsystems, pull request for
 the 3.5-rc1 merge window.
 
 Outside of a few minor driver core changes, we ended up with the
 following different subsystem and core changes as well, due to
 interdependancies on the driver core:
  - hyperv driver updates
  - drivers/memory being created and some drivers moved into it
  - extcon driver subsystem created out of the old Android staging switch
    driver code
  - dynamic debug updates
  - printk rework, and /dev/kmsg changes
 
 All of this has been tested in the linux-next releases for a few weeks
 with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7q28ACgkQMUfUDdst+ykXmwCfcPASzC+/bDkuqdWsqzxlWZ7+
 VOQAnAriySv397St36J6Hz5bMQZwB1Yq
 =SQc+
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...
2012-05-22 16:02:13 -07:00
Chanwoo Choi
6a7e2618b3 misc: MAX8997: Remove max8997-muic driver
This patch remove old max8997-muic drvier because of newly Extcon framework.
Extcon framework manages the external connector, so add extcon-max8997 driver
by using Extcon interface to support MUIC feature of Maxim 8997 PMIC instead
of max8997-muic driver(drivers/misc/max8997-muic.c).

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 15:15:59 -07:00
Greg Kroah-Hartman
ffc2825c29 Staging: mei: move the mei code out of staging
It's been cleaned up, and there's nothing else left to do, so move it
out of staging into drivers/misc/ where all can use it now.

Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Oren Weil <oren.jer.weil@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 18:23:38 -04:00
Eric Andersson
985087dbcb misc: add support for bmp18x chips to the bmp085 driver
The bmp18x chip family comes in an I2C respectively SPI variant.
Hence, the bmp085 driver was split to support both buses.

Tested-by: Zhengguang Guo <zhengguang.guo@bosch-sensortec.com>
Reviewed-by: Stefan Nilsson <stefan.nilsson@unixphere.com>
Signed-off-by: Eric Andersson <eric.andersson@unixphere.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18 14:57:14 -07:00
Donggeun Kim
99f09bebbe misc: Add driver support for MAX8997 MUIC
The MUIC function in MAX8997 device can be used as
a USB port detector and switch.
This patch supports the MUIC feature of MAX8997.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09 00:37:32 +01:00
Igor M. Liplianin
cff4fa8415 [media] altera-stapl: it is time to move out from staging
[mchehab@redhat.com: Fix a merge conflict]
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-23 15:00:57 -03:00
Linus Torvalds
d5ef642355 Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (26 commits)
  amba pl011: workaround for uart registers lockup
  n_gsm: fix the wrong FCS handling
  pch_uart: add missing comment about OKI ML7223
  pch_uart: Add MSI support
  tty: fix "IRQ45: nobody cared"
  PTI feature to allow user to name and mark masterchannel request.
  0 for o PTI Makefile bug.
  tty: serial: samsung.c remove legacy PM code.
  SERIAL: SC26xx: Fix link error.
  serial: mrst_max3110: initialize waitqueue earlier
  mrst_max3110: Change max missing message priority.
  tty: s5pv210: Add delay loop on fifo reset function for UART
  tty/serial: Fix XSCALE serial ports, e.g. ce4100
  serial: bfin_5xx: fix off-by-one with resource size
  drivers/tty: use printk_ratelimited() instead of printk_ratelimit()
  tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs
  tty: n_gsm: Add raw-ip support
  tty: n_gsm: expose gsmtty device nodes at ldisc open time
  pch_phub: Fix register miss-setting issue
  serial: 8250, increase PASS_LIMIT
  ...
2011-07-25 23:09:27 -07:00
Donggeun Kim
a1bb73d76b drivers/misc: add support the FSA9480 USB Switch
The FSA9480 is a USB port accessory detector and switch.  This patch adds
support the FSA9480 USB Switch.

[akpm@linux-foundation.org: make a couple of things static]
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:14 -07:00
J Freyensee
fc360ee7a7 0 for o PTI Makefile bug.
This patch fixes an issue where 'obj' was actually
spelled '0bj' and would skip compiling the pti driver.

Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:38:43 -07:00
Linus Torvalds
99dff58562 Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (48 commits)
  serial: 8250_pci: add support for Cronyx Omega PCI multiserial board.
  tty/serial: Fix break handling for PORT_TEGRA
  tty/serial: Add explicit PORT_TEGRA type
  n_tracerouter and n_tracesink ldisc additions.
  Intel PTI implementaiton of MIPI 1149.7.
  Kernel documentation for the PTI feature.
  export kernel call get_task_comm().
  tty: Remove to support serial for S5P6442
  pch_phub: Support new device ML7223
  8250_pci: Add support for the Digi/IBM PCIe 2-port Adapter
  ASoC: Update cx20442 for TTY API change
  pch_uart: Support new device ML7223 IOH
  parport: Use request_muxed_region for IT87 probe and lock
  tty/serial: add support for Xilinx PS UART
  n_gsm: Use print_hex_dump_bytes
  drivers/tty/moxa.c: Put correct tty value
  TTY: tty_io, annotate locking functions
  TTY: serial_core, remove superfluous set_task_state
  TTY: serial_core, remove invalid test
  Char: moxa, fix locking in moxa_write
  ...

Fix up trivial conflicts in drivers/bluetooth/hci_ldisc.c and
drivers/tty/serial/Makefile.

I did the hci_ldisc thing as an evil merge, cleaning things up.
2011-05-23 12:23:20 -07:00
Ira Snyder
c186f0e177 misc: Add CARMA DATA-FPGA Access Driver
This driver allows userspace to access the data processing FPGAs on the
OVRO CARMA board. It has two modes of operation:

1) random access

This allows users to poke any DATA-FPGA registers by using mmap to map
the address region directly into their memory map.

2) correlation dumping

When correlating, the DATA-FPGA's have special requirements for getting
the data out of their memory before the next correlation. This nominally
happens at 64Hz (every 15.625ms). If the data is not dumped before the
next correlation, data is lost.

The data dumping driver handles buffering up to 1 second worth of
correlation data from the FPGAs. This lowers the realtime scheduling
requirements for the userspace process reading the device.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-19 16:55:08 +10:00
J Freyensee
0b61d2acb1 Intel PTI implementaiton of MIPI 1149.7.
The PTI (Parallel Trace Interface) driver directs
trace data routed from various parts in the system out
through an Intel Penwell PTI port and out of the mobile
device for analysis with a debugging tool (Lauterbach or Fido).
Though n_tracesink and n_tracerouter line discipline drivers
are used to extract modem tracing data to the PTI driver
and other parts of an Intel mobile solution, the PTI driver
can be used independent of n_tracesink and n_tracerouter.

You should select this driver if the target kernel is meant for
an Intel Atom (non-netbook) mobile device containing a MIPI
P1149.7 standard implementation.

Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-13 16:31:00 -07:00
Pratyush Anand
b9500546d5 ST SPEAr: PCIE gadget suppport
This is a configurable gadget.  can be configured by configfs interface.
Any IP available at PCIE bus can be programmed to be used by host
controller.It supoorts both INTX and MSI.

By default, the gadget is configured for INTX and SYSRAM1 is mapped to
BAR0 with size 0x1000

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Viresh Kumar <viresh.kumar@st.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:10 -07:00
Jean Delvare
ff606677f6 Move lis3lv02d drivers to drivers/misc
The lis3lv02d drivers aren't hardware monitoring drivers, so the don't
belong to drivers/hwmon. Move them to drivers/misc, short of a better
home.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:36 +01:00
Arun Murthy
f0f05b1c75 misc: Add ab8500 pwm driver
This patch adds a Pulse Width Modulation driver for Analog Baseband
Chip AB8500.

Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:29:21 +02:00
Greg Kroah-Hartman
e4c5bf8e3d Merge 'staging-next' to Linus's tree
This merges the staging-next tree to Linus's tree and resolves
some conflicts that were present due to changes in other trees that were
affected by files here.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28 09:44:56 -07:00
anantha
22d96aa59c drivers/misc/apds9802als.c: ALS drivers for the apds9802als
This adds support for the ADPS9802ALS sensor.

Cleanup by Alan Cox
	- move mutexes to cover more things
	- report I/O errors back to user space
	- report range and values in LUX

Signed-off-by: Anantha Narayanan <anantha.narayanan@intel.com>
[The 4K and 64K in the hw spec actually means 4095 (12bit) and 65535 (16bit).]
Signed-off-by: Hong Liu <hong.liu@intel.com>
[Updated to match the ALS light API interface convention from Samu]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:15 -07:00
Kalhan Trisal
2e85c4ddd3 drivers/misc/isl29020.c: ambient light sensor
The LS driver will read the latest Lux measurement based upon the light
brightness and will report the LUX output through sysfs interface.

This hardware isn't quite the same as the ISL29003 so has a different
driver.

[akpm@linux-foundation.org: put PM code under #ifdef CONFIG_PM]
Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
[Runtime power management support added]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
[Fixes to runtime PM]
Signed-off-by: Liu Hong <hong.liu@intel.com>
[Cleanups and added checks for I2C errors, reworked the API to match the
 saner one agreed for other sensors]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:15 -07:00
Samu Onkalo
92b1f84d46 drivers/misc: driver for APDS990X ALS and proximity sensors
This is a driver for Avago APDS990X combined ALS and proximity sensor.

Interface is sysfs based.  The driver uses interrupts to provide new data.
The driver supports pm_runtime and regulator frameworks.

See Documentation/misc-devices/apds990x.txt for details

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:14 -07:00
Samu Onkalo
190420ab34 drivers/misc: driver for bh1770glc / sfh7770 ALS and proximity sensor
This is a driver for ROHM BH1770GLC and OSRAM SFH7770 combined ALS and
proximity sensor.

Interface is sysfs based.  The driver uses interrupts to provide new data.
 The driver supports pm_runtime and regulator frameworks.

See Documentation/misc-devices/bh1770glc.txt for details

Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:14 -07:00
Masayuki Ohtak
cf4ece5346 add Packet hub driver for Topcliff Platform controller hub
Packet hub driver of Topcliff PCH

Topcliff PCH is the platform controller hub that is going to be used in
Intel's upcoming general embedded platform. All IO peripherals in
Topcliff PCH are actually devices sitting on AMBA bus. Packet hub is
a special converter device in Topcliff PCH that translate AMBA transactions
to PCI Express transactions and vice versa. Thus packet hub helps present
all IO peripherals in Topcliff PCH as PCIE devices to IA system.
Topcliff PCH has MAC address and Option ROM data.
These data are in SROM which is connected to PCIE bus.
Packet hub driver of Topcliff PCH can access MAC address and Option ROM data in
SROM via sysfs interface.


Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22 10:16:42 -07:00
Pavan Savoy
2bb32e84a1 misc: ti-st: Kconfig & Makefile for TI_ST
Add the Kconfig and the Makefile for the TI_ST driver.
TI_ST driver is the line discipline driver for the Texas Instrument's
WiLink chipsets.
Also add the ti-st folder to list of drivers under drivers/misc.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-06 08:27:00 -07:00
Dmitry Torokhov
d544b7a40a vmware balloon: rename module
In an effort to minimize customer confusion we want to unify naming
convention for VMware-provided kernel modules.  This change renames the
balloon driver from vmware_ballon to vmw_balloon.

We expect to follow this naming convention (vmw_<module_name>) for all
modules that are part of mainline kernel and/or being distributed by
VMware, with the sole exception of vmxnet3 driver (since the name of
mainline driver happens to match with the name used in VMware Tools).

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Acked-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-22 17:22:38 -07:00
Kalhan Trisal
cfa3b24c38 hmc6352: add driver for the HMC6352 compass
This driver will report the heading values in degrees to the sysfs
interface.  The values returned are headings .  e.g.  245.6

Alan: Cleanups requested now all folded in and a sysfs description to keep
Andrew happy. The sysfs description now resembles hwmon.

Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:10 -07:00
Christoph Mair
5bf1d290b5 drivers/misc: support for the pressure sensor BMP085 from Bosch Sensortec
This driver adds support for the BMP085 digital pressure sensor from Bosch
Sensortec.  It exposes a sysfs api to userspace where pressure and
temperature measurement results can be read from the pressure0_input and
temp0_input file.  The chip is able to calculate the average of up to
eight samples to increase the accuracy.  This feature can be controlled by
writing to the oversampling file.

The BMP085 digital pressure sensor can measure ambient air pressure and
temperature.  Both values can be obtained from sysfs files.  The pressure
is measured by reading from pressure0_input.  Valid values range from
30000 to 110000 pascal with a resolution of 1 pascal (=0.01 millibar).

temp0_input holds the current temperature in degree celsius, multiplied by
10.  This results in a resolution of a tenth degree celsius.  Values range
from -400 to 850.

To increase the accuracy, this chip can calculate the average of 1, 2, 4
or 8 samples.  This behavior is controlled through the oversampling sysfs
file.  Two to the power of the value written to that file specifies how
many samples will be used.  Valid values: 0..3.

[akpm@linux-foundation.org: fix typo]
[shubhrajyoti@ti.com: optimize the wait time for the pressure sensor, definition of long is arch dependent so make it u32]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Mair <christoph.mair@gmail.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:05 -07:00
Hemanth V
7efe15f2a4 drivers/misc: ROHM BH1780GLI ambient light sensor driver
Add support for ROHM BH1780GLI Ambient light sensor.

BH1780 supports I2C interface.  Driver supports read/update of power state
and read of lux value (through SYSFS).  Writing value 3 to power_state
enables the sensor and current lux value could be read.

Currently this driver follows the same sysfs convention as supported by
drivers/misc/isl29003.c.

Signed-off-by: Hemanth V <hemanthv@ti.com>
Reviewed-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:05 -07:00
Linus Walleij
ce8962455e ARM: 6214/2: driver for the character LCD found in ARM refdesigns
This adds a driver for the character LCD found on the ARM Versatile
and RealView Platform Baseboards. It doesn't do very much more than
display the text "ARM Linux" on the first line and the linux banner
on the second line, but that's still useful.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Walleij <triad@df.lth.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-26 10:48:28 +01:00
Michael Hennerich
6c536e4ce8 ad525x_dpot: add support for SPI parts
Split the bus logic out into separate files so that we can handle I2C and
SPI busses independently.  The new SPI bus logic brings in support for a
lot more parts:

	AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
	AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
	AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
	AD7376, AD8400, AD8402, AD8403, ADN2850

[randy.dunlap@oracle.com: fix ad525X_dpot build]
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:04 -07:00
Benjamin Herrenschmidt
1ed31d6db9 Merge commit 'origin/master' into next 2010-05-07 11:29:25 +10:00
Dmitry Torokhov
453dc65931 VMware Balloon driver
This is a standalone version of VMware Balloon driver.  Ballooning is a
technique that allows hypervisor dynamically limit the amount of memory
available to the guest (with guest cooperation).  In the overcommit
scenario, when hypervisor set detects that it needs to shuffle some
memory, it instructs the driver to allocate certain number of pages, and
the underlying memory gets returned to the hypervisor.  Later hypervisor
may return memory to the guest by reattaching memory to the pageframes and
instructing the driver to "deflate" balloon.

We are submitting a standalone driver because KVM maintainer (Avi Kivity)
expressed opinion (rightly) that our transport does not fit well into
virtqueue paradigm and thus it does not make much sense to integrate with
virtio.

There were also some concerns whether current ballooning technique is the
right thing.  If there appears a better framework to achieve this we are
prepared to evaluate and switch to using it, but in the meantime we'd like
to get this driver upstream.

We want to get the driver accepted in distributions so that users do not
have to deal with an out-of-tree module and many distributions have
"upstream first" requirement.

The driver has been shipping for a number of years and users running on
VMware platform will have it installed as part of VMware Tools even if it
will not come from a distribution, thus there should not be additional
risk in pulling the driver into mainline.  The driver will only activate
if host is VMware so everyone else should not be affected at all.

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24 11:31:26 -07:00
Benjamin Herrenschmidt
a244b25217 Remove unused HDPU driver
This driver seems to be specific to a "Sky CPU" board for which we
don't appear to have upstream support (or not any more). No Kconfig
file in the kernel ever enables it. So remove it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-04-07 10:08:49 +10:00