Commit Graph

67 Commits

Author SHA1 Message Date
David Gibson
30437b3e74 [POWERPC] Automatically lmb_reserve() initrd
At present, when an initrd is passed to the kernel used flat device
tree properties, the memory the initrd occupies must also be reserved
in the flat tree's reserve map, or the kernel may overwrite it.  That
makes life more complicated than it could be for the bootwrapper.

This patch makes the kernel automatically reserve the initrd's space.
That in turn requires parsing the initrd parameters earlier than they
are currently, in early_init_dt_scan_chosen() instead of
check_for_initrd().

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-08 15:43:35 +11:00
David Gibson
eb6de28637 [POWERPC] Allow duplicate lmb_reserve() calls
At present calling lmb_reserve() (and hence lmb_add_region()) twice
for exactly the same memory region will cause strange behaviour.

This makes life difficult when booting from a flat device tree with
memory reserve map.  Which regions are automatically reserved by the
kernel has changed over time, so it's quite possible a newer kernel
could attempt to auto-reserve a region which is also explicitly listed
in the device tree's reserve map, leading to trouble.

This patch avoids the problem by making lmb_reserve() ignore a call to
reserve a previously reserved region.  It also removes a now redundant
test designed to avoid one specific case of the problem noted above.

At present, this patch deals only with duplicate reservations of an
identical region.  Attempting to reserve two different, but
overlapping regions will still cause problems.  I might post another
patch later dealing with this case, but I'm avoiding it now since it
is substantially more complicated to deal with, less likely to occur
and more likely to indicate a genuine bug elsewhere if it does occur.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-08 15:43:28 +11:00
Dave Jones
ae50517ef1 [POWERPC] Export of_find_property
Without this, building drivers/serial/of_serial.c as a module fails.

WARNING: ".of_find_property" [drivers/serial/of_serial.ko] undefined!

Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-16 14:00:20 +11:00
Alon Bar-Lev
b8757b21f7 [PATCH] Dynamic kernel command-line: powerpc
Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:38 -08:00
Mariusz Kozlowski
b137405143 [POWERPC] arch/ppc/kernel/prom.c of_node_(get|put) cleanup
Remove redundant argument checks for of_node_get() and of_node_put().

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:57 +11:00
Paul Mackerras
0204568a08 [POWERPC] Support ibm,dynamic-reconfiguration-memory nodes
For PAPR partitions with large amounts of memory, the firmware has an
alternative, more compact representation for the information about the
memory in the partition and its NUMA associativity information.  This
adds the code to the kernel to parse this alternative representation.

The other part of this patch is telling the firmware that we can
handle the alternative representation.  There is however a subtlety
here, because the firmware will invoke a reboot if the memory
representation we request is different from the representation that
firmware is currently using.  This is because firmware can't change
the representation on the fly.  Further, some firmware versions used
on POWER5+ machines have a bug where this reboot leaves the machine
with an altered value of load-base, which will prevent any kernel
booting until it is reset to the normal value (0x4000).  Because of
this bug, we do NOT set fake_elf.rpanote.new_mem_def = 1, and thus we
do not request the new representation on POWER5+ and earlier machines.
We do request the new representation on POWER6, which uses the
ibm,client-architecture-support call.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-11 13:49:49 +11:00
Paul Mackerras
974a76f513 [POWERPC] Distinguish POWER6 partition modes and tell userspace
This adds code to look at the properties firmware puts in the device
tree to determine what compatibility mode the partition is in on
POWER6 machines, and set the ELF aux vector AT_HWCAP and AT_PLATFORM
entries appropriately.

Specifically, we look at the cpu-version property in the cpu node(s).
If that contains a "logical" PVR value (of the form 0x0f00000x), we
call identify_cpu again with this PVR value.  A value of 0x0f000001
indicates the partition is in POWER5+ compatibility mode, and a value
of 0x0f000002 indicates "POWER6 architected" mode, with various
extensions disabled.  We also look for various other properties:
ibm,dfp, ibm,purr and ibm,spurr.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:40:16 +11:00
Paul Mackerras
79acbb3ff2 Merge branch 'linux-2.6' into for-linus 2006-12-04 15:59:07 +11:00
Christian Krafft
36ca4ba4b9 [POWERPC] cell: add cpufreq driver for Cell BE processor
This patch adds a cpufreq backend driver to enable frequency scaling on cell.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 14:20:22 +10:00
Benjamin Herrenschmidt
e2100efb26 [POWERPC] Fix device_is_compatible() const warning
Fix a const'ification related warning with device_is_compatible()
and friends related to get_property() not properly having const
on it's input device node argument.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 11:54:24 +10:00
Geoff Levand
c1ce464d29 [POWERPC] Minor fix for bootargs property
Avoid the use of an uninitialized stack variable when the powerpc device tree
bootargs property is either missing or incorrectly defined.  This also makes
CONFIG_CMDLINE work properly under these conditions.  This change adds a test
for the existence of the bootargs property.

early_init_dt_scan_chosen() tests for a zero length bootargs property in its
CONFIG_CMDLINE processing, but the current implementation of
of_get_flat_dt_prop() doesn't assign a value to the length when no property is
found.  Since an automatic variable is used, a stale value from the stack will
be used in the test.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-06 21:10:41 +10:00
Paul Mackerras
a4dc7ff089 [POWERPC] Define of_read_ulong helper
There are various places where we want to extract an unsigned long
value from a device-tree property that can be 1 or 2 cells in length.
This replaces some open-coded calculations, and one place where we
assumed without checking that properties were the length we wanted,
with a little of_read_ulong() helper.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-20 15:09:48 +10:00
Jeremy Kerr
931b261f44 [POWERPC] Make get_property() return a const void *
Previous changes have treated the return values of get_property as
const, so now we can make the actual change to get_property(). There
shouldn't be a need to cast the return values anymore.

We will now get compiler warnings when property values are assigned to
a non-const variable.

If properties need to be updated, there's still the of_find_property
function.

Built for cell_defconfig, chrp32_defconfig, g5_defconfig,
iseries_defconfig, maple_defconfig, pmac32_defconfig, ppc64_defconfig
and pseries_defconfig.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-31 15:55:06 +10:00
Jeremy Kerr
a7f67bdf2c [POWERPC] Constify & voidify get_property()
Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.

powerpc core changes.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-31 15:55:04 +10:00
Benjamin Herrenschmidt
0ebfff1491 [POWERPC] Add new interrupt mapping core and change platforms to use it
This adds the new irq remapper core and removes the old one.  Because
there are some fundamental conflicts with the old code, like the value
of NO_IRQ which I'm now setting to 0 (as per discussions with Linus),
etc..., this commit also changes the relevant platform and driver code
over to use the new remapper (so as not to cause difficulties later
in bisecting).

This patch removes the old pre-parsing of the open firmware interrupt
tree along with all the bogus assumptions it made to try to renumber
interrupts according to the platform. This is all to be handled by the
new code now.

For the pSeries XICS interrupt controller, a single remapper host is
created for the whole machine regardless of how many interrupt
presentation and source controllers are found, and it's set to match
any device node that isn't a 8259.  That works fine on pSeries and
avoids having to deal with some of the complexities of split source
controllers vs. presentation controllers in the pSeries device trees.

The powerpc i8259 PIC driver now always requests the legacy interrupt
range. It also has the feature of being able to match any device node
(including NULL) if passed no device node as an input. That will help
porting over platforms with broken device-trees like Pegasos who don't
have a proper interrupt tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 21:36:01 +10:00
Jeremy Kerr
a1af5b2fd4 [POWERPC] change get_property to return void *
Change the get_property() function to return a void *. This allows us
to later remove the cast done in the majority of callers.

Built for pseries, iseries, pmac32, cell, cbesim, g5, systemsim, maple,
and mpc* defconfigs

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 08:56:33 +10:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Paul Mackerras
339d76c543 [POWERPC] Use little-endian bit from firmware ibm,pa-features property
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-29 17:12:30 +10:00
Michael Ellerman
458148c00b [POWERPC] Setup RTAS values earlier, to enable rtas_call() earlier
Althought RTAS is instantiated when we enter the kernel, we can't actually
call into it until we know its entry point address. Currently we grab that
in rtas_initialize(), however that's quite late in the boot sequence.

To enable rtas_call() earlier, we can grab the RTAS entry etc. values while
we're scanning the flattened device tree. There's existing code to retrieve
the values from /chosen, however we don't store them there anymore, so remove
that code.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 11:59:48 +10:00
Michael Ellerman
7a4571ae55 [POWERPC] Export flat device tree via debugfs for debugging
If DEBUG is turned on in prom.c, export the flat device tree via debugfs.
This has been handy on several occasions.

To look at it:
 # mount -t debugfs none /sys/kernel/debug
 # od -a /sys/kernel/debug/powerpc/flat-device-tree
 and/or
 # dtc -fI dtb /sys/kernel/debug/powerpc/flat-device-tree -O dts

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 11:59:46 +10:00
Benjamin Herrenschmidt
acf7d76827 [POWERPC] cell: add RAS support
This is a first version of support for the Cell BE "Reliability,
Availability and Serviceability" features.

It doesn't yet handle some of the RAS interrupts (the ones described in
iic_is/iic_irr), I'm still working on a proper way to expose these. They
are essentially a cascaded controller by themselves (sic !) though I may
just handle them locally to the iic driver. I need also to sync with
David Erb on the way he hooked in the performance monitor interrupt.

So that's all for 2.6.17 and I'll do more work on that with my rework of
the powerpc interrupt layer that I'm hacking on at the moment.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21 15:01:29 +10:00
Jon Loeliger
8a30088794 [POWERPC] Prevent duplicate lmb reservations for Device Tree blob.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-21 15:01:27 +10:00
Paul Mackerras
bf72aeba2f powerpc: Use 64k pages without needing cache-inhibited large pages
Some POWER5+ machines can do 64k hardware pages for normal memory but
not for cache-inhibited pages.  This patch lets us use 64k hardware
pages for most user processes on such machines (assuming the kernel
has been configured with CONFIG_PPC_64K_PAGES=y).  User processes
start out using 64k pages and get switched to 4k pages if they use any
non-cacheable mappings.

With this, we use 64k pages for the vmalloc region and 4k pages for
the imalloc region.  If anything creates a non-cacheable mapping in
the vmalloc region, the vmalloc region will get switched to 4k pages.
I don't know of any driver other than the DRM that would do this,
though, and these machines don't have AGP.

When a region gets switched from 64k pages to 4k pages, we do not have
to clear out all the 64k HPTEs from the hash table immediately.  We
use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page
was hashed in as a 64k page or a set of 4k pages.  If hash_page is
trying to insert a 4k page for a Linux PTE and it sees that it has
already been inserted as a 64k page, it first invalidates the 64k HPTE
before inserting the 4k HPTE.  The hash invalidation routines also use
the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a
set of 4k HPTEs to remove.  With those two changes, we can tolerate a
mix of 4k and 64k HPTEs in the hash table, and they will all get
removed when the address space is torn down.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 10:45:18 +10:00
Jimi Xenidis
4d1f3f25d9 [PATCH] powerpc: Auto reserve of device tree blob
A devtree compiler (dtc) generated devtree blob is "relocatable" and so
does not contain a reserved_map entry for the blob itself.  This means
that if passed to Linux, Linux will not get lmb_reserve() the blob and
it could be over.  The following patch will explicitly reserve the
"blob" as it was given to us and stops prom_init.c from creating a
reserved mapping for the blob.

NOTE: that the dtc/kexec should not generate the blob reservation entry.
Although if they do, LMB reserver handles overlaps.

Signed-off-by:  <jimix@watson.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 15:02:26 +10:00
Michael Ellerman
35dd54326e [PATCH] powerpc: Move crashkernel= handling into the kernel.
This was missing a quilt ref.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 15:02:18 +10:00
Michael Ellerman
473104134b [PATCH] powerpc: Kdump header cleanup
We need to know the base address of the kdump kernel even when we're not a
kdump kernel, so add a #define for it. Move the logic that sets the kdump
kernelbase into kdump.h instead of page.h.

Rename kdump_setup() to setup_kdump_trampoline() to make it clearer what it's
doing, and add an empty definition for the !CRASH_DUMP case to avoid a

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 15:02:16 +10:00
Michael Ellerman
2babf5c2ec [PATCH] powerpc: Unify mem= handling
We currently do mem= handling in three seperate places. And as benh pointed out
I wrote two of them. Now that we parse command line parameters earlier we can
clean this mess up.

Moving the parsing out of prom_init means the device tree might be allocated
above the memory limit. If that happens we'd have to move it. As it happens
we already have logic to do that for kdump, so just genericise it.

This also means we might have reserved regions above the memory limit, if we
do the bootmem allocator will blow up, so we have to modify
lmb_enforce_memory_limit() to truncate the reserves as well.

Tested on P5 LPAR, iSeries, F50, 44p. Tested moving device tree on P5 and
44p and F50.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 15:02:15 +10:00
Michael Ellerman
846f77b08c [PATCH] powerpc: Parse early parameters earlier
Currently we have call parse_early_param() earliyish, but not really very
early. In particular, it's not early enough to do things like mem=x or
crashkernel=blah, which is annoying.

So do it earlier. I've checked all the early param handlers, and none of them
look like they should have any trouble with this. I haven't tested the
booke_wdt ones though.

On 32-bit we were doing the CONFIG_CMDLINE logic twice, so don't.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-19 15:02:13 +10:00
Paul Mackerras
d205819e23 [PATCH] powerpc: Use the ibm,pa-features property if available
Forthcoming IBM machines will have a "ibm,pa-features" property on CPU
nodes, that contains bits indicating which optional architecture
features are implemented by the CPU.  This adds code to use the
property, if present, to update our CPU feature bitmaps.  Note that
this means we can both set and clear feature bits based on what
the firmware tells us.

This is based on a patch by Will Schmidt <willschm@us.ibm.com>.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-03 23:06:47 +10:00
Olof Johansson
2889773131 [PATCH] powerpc: Lower threshold for DART enablement to 1GB
Turn on the DART already at 1GB. This is needed because of crippled
devices in some systems, i.e. Airport Extreme cards, only supporting
30-bit DMA addresses.

Otherwise, users with between 1 and 2GB of memory will need to manually
enable it with iommu=force, and that's no good.

Some simple performance tests show that there's a slight impact of
enabling DART, but it's in the 1-3% range (kernel build with disk I/O
as well as over NFS).

iommu=off can still be used for those who don't want to deal with the
overhead (and don't need it for any devices).

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-21 22:29:37 +10:00
Benjamin Herrenschmidt
e8222502ee [PATCH] powerpc: Kill _machine and hard-coded platform numbers
This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism.  With this,
board support files can simply declare a new machine type with a
macro, and implement a probe() function that uses the flattened
device-tree to detect if they apply for a given machine.

We now have a machine_is() macro that replaces the comparisons of
_machine with the various PLATFORM_* constants.  This commit also
changes various drivers to use the new macro instead of looking at
_machine.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 23:15:54 +11:00
Stephen Rothwell
4d177fbfda [PATCH] powerpc: a couple of trivial compile warning fixes
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 20:40:33 +11:00
Kumar Gala
10d713aef2 powerpc: use memparse() for mem= command line parsing
Use memparse() instead of our own code for handling the parsing of mem=

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-03-27 18:26:42 -06:00
Anton Blanchard
4df20460a3 [PATCH] powerpc: Allow non zero boot cpuids
We currently have a hack to flip the boot cpu and its secondary thread
to logical cpuid 0 and 1. This means the logical - physical mapping will
differ depending on which cpu is boot cpu. This is most apparent on
kexec, where we might kexec on any cpu and therefore change the mapping
from boot to boot.

The patch below does a first pass early on to work out the logical cpuid
of the boot thread. We then fix up some paca structures to match.

Ive also removed the boot_cpuid_phys variable for ppc64, to be
consistent we use get_hard_smp_processor_id(boot_cpuid) everywhere.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 14:48:48 +11:00
Paul Mackerras
6749c55073 Merge ../powerpc-merge 2006-02-28 16:35:24 +11:00
Kumar Gala
329dda083e [PATCH] powerpc: Fix mem= cmdline handling on arch/powerpc for !MULTIPLATFORM
mem= command line option was being ignored in arch/powerpc if we were not
a CONFIG_MULTIPLATFORM (which is handled via prom_init stub). The initial
command line extraction and parsing needed to be moved earlier in the boot
process and have code to actual parse mem= and do something about it.

Also, fixed a compile warning in the file.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-24 14:34:50 -08:00
Michael Ellerman
d7a5b2ffa1 [PATCH] powerpc: Always panic if lmb_alloc() fails
Currently most callers of lmb_alloc() don't check if it worked or not, if it
ever does weird bad things will probably happen. The few callers who do check
just panic or BUG_ON.

So make lmb_alloc() panic internally, to catch bugs at the source. The few
callers who did check the result no longer need to.

The only caller that did anything interesting with the return result was
careful_allocation(). For it we create __lmb_alloc_base() which _doesn't_ panic
automatically, a little messy, but passable.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 22:38:34 +11:00
Olaf Hering
090db7c86d [PATCH] powerpc: remove pointer/integer confusion in of_find_node_by_name
remove pointer/integer confusion

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:32:44 +11:00
Michael Ellerman
b68239ee74 [PATCH] powerpc: Don't overwrite flat device tree with kdump kernel
It's possible for prom_init to allocate the flat device tree inside the
kdump crash kernel region. If this happens, when we load the kdump kernel we
overwrite the flattened device tree, which is bad.

We could make prom_init try and avoid allocating inside the crash kernel
region, but then we run into issues if the crash kernel region uses all the
space inside the RMO. The easiest solution is to move the flat device tree
once we're running in the kernel.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:32:44 +11:00
Michael Ellerman
fa93895329 [PATCH] powerpc: Don't allocate zero bytes in finish_device_tree()
In prom.c we run finish_node() on allnodes twice. The first time we just
calculate how much memory we'll need, the second time we do the actual work.

If the calculation stage determines that we need 0 bytes, then we should skip
the lmb allocation. Although an alloc of zero will work, it has been seen to
lead to a BUG_ON() in reserve_bootmem() on at least one machine.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 21:28:38 +11:00
Dave C Boutcher
ecaa8b0ff3 [PATCH] powerpc: Add of_find_property function
Add an of_find_property function that returns a struct property
given a property name.  Then change the get_property function to
use that routine internally.

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 21:11:57 +11:00
Dave C Boutcher
088186ded4 [PATCH] powerpc: Add/remove/update properties in firmware device tree
Add support for updating and removing device tree
properties.  Since we hand out pointers to properties with gay
abandon, we can't just free the property storage.  Instead we
move deleted, or the old copy of an updated property, to a
"dead properties" list.

Also note, its not feasable to kref device tree properties.
we call get_property() all over the kernel in a wild variety
of contexts.

One consequence of this change is that we now take a
read_lock(&devtree_lock) when doing get_property().

Signed-off-by: Dave Boutcher <sleddog@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-13 21:02:50 +11:00
Kumar Gala
cbbcf34011 [PATCH] powerpc: Fixed memory reserve map layout
powerpc: Fixed memory reserve map layout

The memory reserve map is suppose to be a pair of 64-bit integers
to represent each region.  On ppc32 the code was treating the
pair as two 32-bit integers.  Additional the prom_init code was
producing the wrong layout on ppc32.

Added a simple check to try to provide backwards compatibility.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 20:09:29 +11:00
Adrian Bunk
943ffb587c spelling: s/retreive/retrieve/
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-10 00:10:13 +01:00
Benjamin Herrenschmidt
1beb6a7d6c [PATCH] powerpc: Experimental support for new G5 Macs (#2)
This adds some very basic support for the new machines, including the
Quad G5 (tested), and other new dual core based machines and iMac G5
iSight (untested). This is still experimental !  There is no thermal
control yet, there is no proper handing of MSIs, etc.. but it
boots, I have all 4 cores up on my machine. Compared to the previous
version of this patch, this one adds DART IOMMU support for the U4
chipset and thus should work fine on setups with more than 2Gb of RAM.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:03:17 +11:00
Benjamin Herrenschmidt
cc5d0189b9 [PATCH] powerpc: Remove device_node addrs/n_addr
The pre-parsed addrs/n_addrs fields in struct device_node are finally
gone. Remove the dodgy heuristics that did that parsing at boot and
remove the fields themselves since we now have a good replacement with
the new OF parsing code. This patch also fixes a bunch of drivers to use
the new code instead, so that at least pmac32, pseries, iseries and g5
defconfigs build.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:53:55 +11:00
Michael Ellerman
ba7594852f [PATCH] powerpc: Add support for "linux,usable-memory" on memory nodes
Milton has proposed that we should support a "linux,usable-memory" property
on memory nodes which describes, in preference to "reg", the regions of memory
Linux should use.

This facility is required for kdump to inform the second kernel which memory
it should use.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:52:38 +11:00
Michael Ellerman
dcee30361d [PATCH] powerpc: Parse crashkernel= parameter in first kernel
This patch adds code to parse and setup the crash kernel resource in the
first kernel. PPC64 ignores the @x part, we always run at 32 MB.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:52:31 +11:00
Michael Ellerman
0cc4746cad [PATCH] powerpc: Reroute interrupts from 0 + offset to PHYSICAL_START + offset
Regardless of where the kernel's linked we always get interrupts at low
addresses. This patch creates a trampoline in the first 3 pages of memory,
where interrupts land, and patches those addresses to jump into the real
kernel code at PHYSICAL_START.

We also need to reserve the trampoline code and a bit more in prom.c

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:52:21 +11:00
Paul Mackerras
1dfc677209 powerpc: Export a couple of prom functions
These are needed by the TPM driver, apparently.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 17:30:40 +11:00