Commit Graph

3082 Commits

Author SHA1 Message Date
Zwane Mwaikambo
f370513640 [PATCH] i386 CPU hotplug
(The i386 CPU hotplug patch provides infrastructure for some work which Pavel
is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua
<shaohua.li@intel.com> is doing)

The following provides i386 architecture support for safely unregistering and
registering processors during runtime, updated for the current -mm tree.  In
order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the
cpu_online check in do_IRQ() by modifying fixup_irqs().  The difference being
that on cpu offline, fixup_irqs() is called before we clear the cpu from
cpu_online_map and a long delay in order to ensure that we never have any
queued external interrupts on the APICs.  There are additional changes to s390
and ppc64 to account for this change.

1) Add CONFIG_HOTPLUG_CPU
2) disable local APIC timer on dead cpus.
3) Disable preempt around irq balancing to prevent CPUs going down.
4) Print irq stats for all possible cpus.
5) Debugging check for interrupts on offline cpus.
6) Hacky fixup_irqs() to redirect irqs when cpus go off/online.
7) play_dead() for offline cpus to spin inside.
8) Handle offline cpus set in flush_tlb_others().
9) Grab lock earlier in smp_call_function() to prevent CPUs going down.
10) Implement __cpu_disable() and __cpu_die().
11) Enable local interrupts in cpu_enable() after fixup_irqs()
12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus.
13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline.

Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:29 -07:00
David Woodhouse
e1b09eba26 AUDIT: Use KERN_NOTICE for printk of audit records
They aren't errors.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-24 17:24:11 +01:00
David Woodhouse
5bb289b5a0 AUDIT: Clean up user message filtering
Don't look up the task by its pid and then use the syscall filtering
helper. Just implement our own filter helper which operates solely on
the information in the netlink_skb_parms. 

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-24 14:14:05 +01:00
David Woodhouse
993e2d4106 AUDIT: Return correct result from audit_filter_rules()
When the task refcounting was added to audit_filter_rules() it became
more of a problem that this function was violating the 'only one 
return from each function' rule. In fixing it to use a variable to store 
'ret' I stupidly neglected to actually change the 'return 1;' at the 
end. This makes it not work very well.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-24 08:21:49 +01:00
Adrian Bunk
52c1da3953 [PATCH] make various thing static
Another rollup of patches which give various symbols static scope

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:06:43 -07:00
Matt Domsch
c988d2b284 [PATCH] modules: add version and srcversion to sysfs
This patch adds version and srcversion files to
/sys/module/${modulename} containing the version and srcversion fields
of the module's modinfo section (if present).

/sys/module/e1000
|-- srcversion
`-- version

This patch differs slightly from the version posted in January, as it
now uses the new kstrdup() call in -mm.

Why put this in sysfs?

a) Tools like DKMS, which deal with changing out individual kernel
   modules without replacing the whole kernel, can behave smarter if they
   can tell the version of a given module.  The autoinstaller feature, for
   example, which determines if your system has a "good" version of a
   driver (i.e.  if the one provided by DKMS has a newer verson than that
   provided by the kernel package installed), and to automatically compile
   and install a newer version if DKMS has it but your kernel doesn't yet
   have that version.

b) Because sysadmins manually, or with tools like DKMS, can switch out
   modules on the file system, you can't count on 'modinfo foo.ko', which
   looks at /lib/modules/${kernelver}/...  actually matching what is loaded
   into the kernel already.  Hence asking sysfs for this.

c) as the unbind-driver-from-device work takes shape, it will be
   possible to rebind a driver that's built-in (no .ko to modinfo for the
   version) to a newly loaded module.  sysfs will have the
   currently-built-in version info, for comparison.

d) tech support scripts can then easily grab the version info for what's
   running presently - a question I get often.

There has been renewed interest in this patch on linux-scsi by driver
authors.

As the idea originated from GregKH, I leave his Signed-off-by: intact,
though the implementation is nearly completely new.  Compiled and run on
x86 and x86_64.

From: Matthew Dobson <colpatch@us.ibm.com>

      build fix

From: Thierry Vignaud <tvignaud@mandriva.com>

      build fix

From: Matthew Dobson <colpatch@us.ibm.com>

      warning fix

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:06:40 -07:00
David Howells
3e30148c3d [PATCH] Keys: Make request-key create an authorisation key
The attached patch makes the following changes:

 (1) There's a new special key type called ".request_key_auth".

     This is an authorisation key for when one process requests a key and
     another process is started to construct it. This type of key cannot be
     created by the user; nor can it be requested by kernel services.

     Authorisation keys hold two references:

     (a) Each refers to a key being constructed. When the key being
     	 constructed is instantiated the authorisation key is revoked,
     	 rendering it of no further use.

     (b) The "authorising process". This is either:

     	 (i) the process that called request_key(), or:

     	 (ii) if the process that called request_key() itself had an
     	      authorisation key in its session keyring, then the authorising
     	      process referred to by that authorisation key will also be
     	      referred to by the new authorisation key.

	 This means that the process that initiated a chain of key requests
	 will authorise the lot of them, and will, by default, wind up with
	 the keys obtained from them in its keyrings.

 (2) request_key() creates an authorisation key which is then passed to
     /sbin/request-key in as part of a new session keyring.

 (3) When request_key() is searching for a key to hand back to the caller, if
     it comes across an authorisation key in the session keyring of the
     calling process, it will also search the keyrings of the process
     specified therein and it will use the specified process's credentials
     (fsuid, fsgid, groups) to do that rather than the calling process's
     credentials.

     This allows a process started by /sbin/request-key to find keys belonging
     to the authorising process.

 (4) A key can be read, even if the process executing KEYCTL_READ doesn't have
     direct read or search permission if that key is contained within the
     keyrings of a process specified by an authorisation key found within the
     calling process's session keyring, and is searchable using the
     credentials of the authorising process.

     This allows a process started by /sbin/request-key to read keys belonging
     to the authorising process.

 (5) The magic KEY_SPEC_*_KEYRING key IDs when passed to KEYCTL_INSTANTIATE or
     KEYCTL_NEGATE will specify a keyring of the authorising process, rather
     than the process doing the instantiation.

 (6) One of the process keyrings can be nominated as the default to which
     request_key() should attach new keys if not otherwise specified. This is
     done with KEYCTL_SET_REQKEY_KEYRING and one of the KEY_REQKEY_DEFL_*
     constants. The current setting can also be read using this call.

 (7) request_key() is partially interruptible. If it is waiting for another
     process to finish constructing a key, it can be interrupted. This permits
     a request-key cycle to be broken without recourse to rebooting.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:19 -07:00
David Howells
7888e7ff4e [PATCH] Keys: Pass session keyring to call_usermodehelper()
The attached patch makes it possible to pass a session keyring through to the
process spawned by call_usermodehelper().  This allows patch 3/3 to pass an
authorisation key through to /sbin/request-key, thus permitting better access
controls when doing just-in-time key creation.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 00:05:18 -07:00
David Woodhouse
9e94e66a5b AUDIT: No really, we don't want to audit auditd.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-23 18:33:54 +01:00
Benjamin LaHaise
c43dc2fd88 [PATCH] aio: make wait_queue ->task ->private
In the upcoming aio_down patch, it is useful to store a private data
pointer in the kiocb's wait_queue.  Since we provide our own wake up
function and do not require the task_struct pointer, it makes sense to
convert the task pointer into a generic private pointer.

Signed-off-by: Benjamin LaHaise <benjamin.c.lahaise@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:34 -07:00
Christoph Lameter
71a2224d7d [PATCH] Optimize sys_times for a single thread process
Avoid taking the tasklist_lock in sys_times if the process is single
threaded.  In a NUMA system taking the tasklist_lock may cause a bouncing
cacheline if multiple independent processes continually call sys_times to
measure their performance.

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:30 -07:00
Kirill Korotaev
4fea2838aa [PATCH] Software suspend and recalc sigpending bug fix
This patch fixes recalc_sigpending() to work correctly with tasks which are
being freezed.

The problem is that freeze_processes() sets PF_FREEZE and TIF_SIGPENDING
flags on tasks, but recalc_sigpending() called from e.g.
sys_rt_sigtimedwait or any other kernel place will clear TIF_SIGPENDING due
to no pending signals queued and the tasks won't be freezed until it
recieves a real signal or freezed_processes() fail due to timeout.

Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-Off-By: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:27 -07:00
Alan Cox
d6e7114481 [PATCH] setuid core dump
Add a new `suid_dumpable' sysctl:

This value can be used to query and set the core dump mode for setuid
or otherwise protected/tainted binaries. The modes are

0 - (default) - traditional behaviour.  Any process which has changed
    privilege levels or is execute only will not be dumped

1 - (debug) - all processes dump core when possible.  The core dump is
    owned by the current user and no security is applied.  This is intended
    for system debugging situations only.  Ptrace is unchecked.

2 - (suidsafe) - any binary which normally would not be dumped is dumped
    readable by root only.  This allows the end user to remove such a dump but
    not access it directly.  For security reasons core dumps in this mode will
    not overwrite one another or other files.  This mode is appropriate when
    adminstrators are attempting to debug problems in a normal environment.

(akpm:

> > +EXPORT_SYMBOL(suid_dumpable);
>
> EXPORT_SYMBOL_GPL?

No problem to me.

> >  	if (current->euid == current->uid && current->egid == current->gid)
> >  		current->mm->dumpable = 1;
>
> Should this be SUID_DUMP_USER?

Actually the feedback I had from last time was that the SUID_ defines
should go because its clearer to follow the numbers. They can go
everywhere (and there are lots of places where dumpable is tested/used
as a bool in untouched code)

> Maybe this should be renamed to `dump_policy' or something.  Doing that
> would help us catch any code which isn't using the #defines, too.

Fair comment. The patch was designed to be easy to maintain for Red Hat
rather than for merging. Changing that field would create a gigantic
diff because it is used all over the place.

)

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:26 -07:00
Prasanna S Panchamukhi
8b0914ea74 [PATCH] jprobes: allow a jprobe to coexist with muliple kprobes
Presently either multiple kprobes or only one jprobe could be inserted.
This patch removes the above limitation and allows one jprobe and multiple
kprobes to coexist at the same address.  However multiple jprobes cannot
coexist with multiple kprobes.  Currently I am working on the prototype to
allow multiple jprobes coexist with multiple kprobes.

Signed-off-by: Ananth N Mavinakayanhalli <amavin@redhat.com>
Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:25 -07:00
Prasanna S Panchamukhi
ea32c65cc2 [PATCH] kprobes: Temporary disarming of reentrant probe
In situations where a kprobes handler calls a routine which has a probe on it,
then kprobes_handler() disarms the new probe forever.  This patch removes the
above limitation by temporarily disarming the new probe.  When the another
probe hits while handling the old probe, the kprobes_handler() saves previous
kprobes state and handles the new probe without calling the new kprobes
registered handlers.  kprobe_post_handler() restores back the previous kprobes
state and the normal execution continues.

However on x86_64 architecture, re-rentrancy is provided only through
pre_handler().  If a routine having probe is referenced through
post_handler(), then the probes on that routine are disarmed forever, since
the exception stack is gets changed after the processor single steps the
instruction of the new probe.

This patch includes generic changes to support temporary disarming on
reentrancy of probes.

Signed-of-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:24 -07:00
Hien Nguyen
0aa55e4d7d [PATCH] kprobes: moves lock-unlock to non-arch kprobe_flush_task
This patch moves the lock/unlock of the arch specific kprobe_flush_task()
to the non-arch specific kprobe_flusk_task().

Signed-off-by: Hien Nguyen <hien@us.ibm.com>
Acked-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:21 -07:00
Rusty Lynch
7e1048b11c [PATCH] Move kprobe [dis]arming into arch specific code
The architecture independent code of the current kprobes implementation is
arming and disarming kprobes at registration time.  The problem is that the
code is assuming that arming and disarming is a just done by a simple write
of some magic value to an address.  This is problematic for ia64 where our
instructions look more like structures, and we can not insert break points
by just doing something like:

*p->addr = BREAKPOINT_INSTRUCTION;

The following patch to 2.6.12-rc4-mm2 adds two new architecture dependent
functions:

     * void arch_arm_kprobe(struct kprobe *p)
     * void arch_disarm_kprobe(struct kprobe *p)

and then adds the new functions for each of the architectures that already
implement kprobes (spar64/ppc64/i386/x86_64).

I thought arch_[dis]arm_kprobe was the most descriptive of what was really
happening, but each of the architectures already had a disarm_kprobe()
function that was really a "disarm and do some other clean-up items as
needed when you stumble across a recursive kprobe." So...  I took the
liberty of changing the code that was calling disarm_kprobe() to call
arch_disarm_kprobe(), and then do the cleanup in the block of code dealing
with the recursive kprobe case.

So far this patch as been tested on i386, x86_64, and ppc64, but still
needs to be tested in sparc64.

Signed-off-by: Rusty Lynch <rusty.lynch@intel.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:21 -07:00
Hien Nguyen
b94cce926b [PATCH] kprobes: function-return probes
This patch adds function-return probes to kprobes for the i386
architecture.  This enables you to establish a handler to be run when a
function returns.

1. API

Two new functions are added to kprobes:

	int register_kretprobe(struct kretprobe *rp);
	void unregister_kretprobe(struct kretprobe *rp);

2. Registration and unregistration

2.1 Register

  To register a function-return probe, the user populates the following
  fields in a kretprobe object and calls register_kretprobe() with the
  kretprobe address as an argument:

  kp.addr - the function's address

  handler - this function is run after the ret instruction executes, but
  before control returns to the return address in the caller.

  maxactive - The maximum number of instances of the probed function that
  can be active concurrently.  For example, if the function is non-
  recursive and is called with a spinlock or mutex held, maxactive = 1
  should be enough.  If the function is non-recursive and can never
  relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should
  be enough.  maxactive is used to determine how many kretprobe_instance
  objects to allocate for this particular probed function.  If maxactive <=
  0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 *
  NR_CPUS) else maxactive=NR_CPUS)

  For example:

    struct kretprobe rp;
    rp.kp.addr = /* entrypoint address */
    rp.handler = /*return probe handler */
    rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */
    register_kretprobe(&rp);

  The following field may also be of interest:

  nmissed - Initialized to zero when the function-return probe is
  registered, and incremented every time the probed function is entered but
  there is no kretprobe_instance object available for establishing the
  function-return probe (i.e., because maxactive was set too low).

2.2 Unregister

  To unregiter a function-return probe, the user calls
  unregister_kretprobe() with the same kretprobe object as registered
  previously.  If a probed function is running when the return probe is
  unregistered, the function will return as expected, but the handler won't
  be run.

3. Limitations

3.1 This patch supports only the i386 architecture, but patches for
    x86_64 and ppc64 are anticipated soon.

3.2 Return probes operates by replacing the return address in the stack
    (or in a known register, such as the lr register for ppc).  This may
    cause __builtin_return_address(0), when invoked from the return-probed
    function, to return the address of the return-probes trampoline.

3.3 This implementation uses the "Multiprobes at an address" feature in
    2.6.12-rc3-mm3.

3.4 Due to a limitation in multi-probes, you cannot currently establish
    a return probe and a jprobe on the same function.  A patch to remove
    this limitation is being tested.

This feature is required by SystemTap (http://sourceware.org/systemtap),
and reflects ideas contributed by several SystemTap developers, including
Will Cohen and Ananth Mavinakayanahalli.

Signed-off-by: Hien Nguyen <hien@us.ibm.com>
Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@laposte.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:21 -07:00
Alexander Nyberg
df164db5fd [PATCH] avoid resursive oopses
Prevent recursive faults in do_exit() by leaving the task alone and wait
for reboot.  This may allow a more graceful shutdown and possibly save the
original oops.

Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:20 -07:00
Christoph Hellwig
5f45f1a78f [PATCH] remove duplicate get_dentry functions in various places
Various filesystem drivers have grown a get_dentry() function that's a
duplicate of lookup_one_len, except that it doesn't take a maximum length
argument and doesn't check for \0 or / in the passed in filename.

Switch all these places to use lookup_one_len.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Greg KH <greg@kroah.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:20 -07:00
Jesper Juhl
be5b4fbd01 [PATCH] preempt_count is int - remove cast and don't assign to unsigned type
In kernel/sched.c the return value from preempt_count() is cast to an int.
That made sense when preempt_count was defined as different types on is not
needed and should go away.  The patch removes the cast.

In kernel/timer.c the return value from preempt_count() is assigned to a
variable of type u32 and then that unsigned value is later compared to
preempt_count().  Since preempt_count() returns an int, an int is what
should be used to store its return value.  Storing the result in an
unsigned 32bit integer made a tiny bit of sense back when preempt_count was
different types on different archs, but no more - let's not play signed vs
unsigned comparison games when we don't have to.  The patch modifies the
code to use an int to hold the value.  While I was around that bit of code
I also made two changes to a nearby (related) printk() - I modified it to
specify the loglevel explicitly and also broke the line into a few pieces
to avoid it being longer than 80 chars and clarified the text a bit.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:19 -07:00
Greg Edwards
ab4af03a40 [PATCH] CON_CONSDEV bit not set correctly on last console
According to include/linux/console.h, CON_CONSDEV flag should be set on
the last console specified on the boot command line:

     86 #define CON_PRINTBUFFER (1)
     87 #define CON_CONSDEV     (2) /* Last on the command line */
     88 #define CON_ENABLED     (4)
     89 #define CON_BOOT        (8)

This does not currently happen if there is more than one console specified
on the boot commandline.  Instead, it gets set on the first console on the
command line.  This can cause problems for things like kdb that look for
the CON_CONSDEV flag to see if the console is valid.

Additionaly, it doesn't look like CON_CONSDEV is reassigned to the next
preferred console at unregister time if the console being unregistered
currently has that bit set.

Example (from sn2 ia64):

elilo vmlinuz root=<dev> console=ttyS0 console=ttySG0

in this case, the flags on ttySG console struct will be 0x4 (should be
0x6).

Attached patch against bk fixes both issues for the cases I looked at.  It
uses selected_console (which gets incremented for each console specified on
the command line) as the indicator of which console to set CON_CONSDEV on.
When adding the console to the list, if the previous one had CON_CONSDEV
set, it masks it out.  Tested on ia64 and x86.

The problem with the current behavior is it breaks overriding the default from
the boot line.  In the ia64 case, there may be a global append line defining
console=a in elilo.conf.  Then you want to boot your kernel, and want to
override the default by passing console=b on the boot line.  elilo constructs
the kernel cmdline by starting with the value of the global append line, then
tacks on whatever else you specify, which puts console=b last.

Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:18 -07:00
Oleg Nesterov
f972be33ce [PATCH] posix-timers: use try_to_del_timer_sync()
sys_timer_settime/sys_timer_delete needs to delete k_itimer->real.timer
synchronously while holding ->it_lock, which is also locked in
posix_timer_fn.

This patch removes timer_active/set_timer_inactive which plays with
timer_list's internals in favour of using try_to_del_timer_sync(), which
was introduced in the previous patch.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:17 -07:00
Oleg Nesterov
fd450b7318 [PATCH] timers: introduce try_to_del_timer_sync()
This patch splits del_timer_sync() into 2 functions.  The new one,
try_to_del_timer_sync(), returns -1 when it hits executing timer.

It can be used in interrupt context, or when the caller hold locks which
can prevent completion of the timer's handler.

NOTE.  Currently it can't be used in interrupt context in UP case, because
->running_timer is used only with CONFIG_SMP.

Should the need arise, it is possible to kill #ifdef CONFIG_SMP in
set_running_timer(), it is cheap.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:16 -07:00
Oleg Nesterov
55c888d6d0 [PATCH] timers fixes/improvements
This patch tries to solve following problems:

1. del_timer_sync() is racy. The timer can be fired again after
   del_timer_sync have checked all cpus and before it will recheck
   timer_pending().

2. It has scalability problems. All cpus are scanned to determine
   if the timer is running on that cpu.

   With this patch del_timer_sync is O(1) and no slower than plain
   del_timer(pending_timer), unless it has to actually wait for
   completion of the currently running timer.

   The only restriction is that the recurring timer should not use
   add_timer_on().

3. The timers are not serialized wrt to itself.

   If CPU_0 does mod_timer(jiffies+1) while the timer is currently
   running on CPU 1, it is quite possible that local interrupt on
   CPU_0 will start that timer before it finished on CPU_1.

4. The timers locking is suboptimal. __mod_timer() takes 3 locks
   at once and still requires wmb() in del_timer/run_timers.

   The new implementation takes 2 locks sequentially and does not
   need memory barriers.

Currently ->base != NULL means that the timer is pending. In that case
->base.lock is used to lock the timer. __mod_timer also takes timer->lock
because ->base can be == NULL.

This patch uses timer->entry.next != NULL as indication that the timer is
pending. So it does __list_del(), entry->next = NULL instead of list_del()
when the timer is deleted.

The ->base field is used for hashed locking only, it is initialized
in init_timer() which sets ->base = per_cpu(tvec_bases). When the
tvec_bases.lock is locked, it means that all timers which are tied
to this base via timer->base are locked, and the base itself is locked
too.

So __run_timers/migrate_timers can safely modify all timers which could
be found on ->tvX lists (pending timers).

When the timer's base is locked, and the timer removed from ->entry list
(which means that _run_timers/migrate_timers can't see this timer), it is
possible to set timer->base = NULL and drop the lock: the timer remains
locked.

This patch adds lock_timer_base() helper, which waits for ->base != NULL,
locks the ->base, and checks it is still the same.

__mod_timer() schedules the timer on the local CPU and changes it's base.
However, it does not lock both old and new bases at once. It locks the
timer via lock_timer_base(), deletes the timer, sets ->base = NULL, and
unlocks old base. Then __mod_timer() locks new_base, sets ->base = new_base,
and adds this timer. This simplifies the code, because AB-BA deadlock is not
possible. __mod_timer() also ensures that the timer's base is not changed
while the timer's handler is running on the old base.

__run_timers(), del_timer() do not change ->base anymore, they only clear
pending flag.

So del_timer_sync() can test timer->base->running_timer == timer to detect
whether it is running or not.

We don't need timer_list->lock anymore, this patch kills it.

We also don't need barriers. del_timer() and __run_timers() used smp_wmb()
before clearing timer's pending flag. It was needed because __mod_timer()
did not lock old_base if the timer is not pending, so __mod_timer()->list_add()
could race with del_timer()->list_del(). With this patch these functions are
serialized through base->lock.

One problem. TIMER_INITIALIZER can't use per_cpu(tvec_bases). So this patch
adds global

        struct timer_base_s {
                spinlock_t lock;
                struct timer_list *running_timer;
        } __init_timer_base;

which is used by TIMER_INITIALIZER. The corresponding fields in tvec_t_base_s
struct are replaced by struct timer_base_s t_base.

It is indeed ugly. But this can't have scalability problems. The global
__init_timer_base.lock is used only when __mod_timer() is called for the first
time AND the timer was compile time initialized. After that the timer migrates
to the local CPU.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Renaud Lienhart <renaud.lienhart@free.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:16 -07:00
Christoph Lameter
5912100372 [PATCH] i386: Selectable Frequency of the Timer Interrupt
Make the timer frequency selectable. The timer interrupt may cause bus
and memory contention in large NUMA systems since the interrupt occurs
on each processor HZ times per second.

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:10 -07:00
David Woodhouse
9470178e62 AUDIT: Remove stray declaration of tsk from audit_receive_msg().
It's not used any more.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-22 15:40:55 +01:00
David Woodhouse
9ad9ad385b AUDIT: Wait for backlog to clear when generating messages.
Add a gfp_mask to audit_log_start() and audit_log(), to reduce the
amount of GFP_ATOMIC allocation -- most of it doesn't need to be 
GFP_ATOMIC. Also if the mask includes __GFP_WAIT, then wait up to
60 seconds for the auditd backlog to clear instead of immediately 
abandoning the message. 

The timeout should probably be made configurable, but for now it'll 
suffice that it only happens if auditd is actually running.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-22 15:04:33 +01:00
David Woodhouse
4a4cd633b5 AUDIT: Optimise the audit-disabled case for discarding user messages
Also exempt USER_AVC message from being discarded to preserve 
existing behaviour for SE Linux.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-22 14:56:47 +01:00
Paolo 'Blaisorblade' Giarrusso
b77d6adc92 [PATCH] uml: make hw_controller_type->release exist only for archs needing it
With Chris Wedgwood <cw@f00f.org>

As suggested by Chris, we can make the "just added" method ->release
conditional to UML only (better: to archs requesting it, i.e.  only UML
currently), so that other archs don't get this unneeded crud, and if UML
won't need it any more we can kill this.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:32 -07:00
Paolo 'Blaisorblade' Giarrusso
dbce706e25 [PATCH] uml: add and use generic hw_controller_type->release
With Chris Wedgwood <cw@f00f.org>

Currently UML must explicitly call the UML-specific
free_irq_by_irq_and_dev() for each free_irq call it's done.

This is needed because ->shutdown and/or ->disable are only called when the
last "action" for that irq is removed.

Instead, for UML shared IRQs (UML IRQs are very often, if not always,
shared), for each dev_id some setup is done, which must be cleared on the
release of that fd.  For instance, for each open console a new instance
(i.e.  new dev_id) of the same IRQ is requested().

Exactly, a fd is stored in an array (pollfds), which is after read by a
host thread and passed to poll().  Each event registered by poll() triggers
an interrupt.  So, for each free_irq() we must remove the corresponding
host fd from the table, which we do via this -release() method.

In this patch we add an appropriate hook for this, and remove all uses of
it by pointing the hook to the said procedure; this is safe to do since the
said procedure.

Also some cosmetic improvements are included.

This is heavily based on some work by Chris Wedgwood, which however didn't
get the patch merged for something I'd call a "misunderstanding" (the need
for this patch wasn't cleanly explained, thus adding the generic hook was
felt as undesirable).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
CC: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:32 -07:00
Hugh Dickins
45918e1a8b [PATCH] dup_mmap: update comment on new vma
Remove part of comment on linking new vma in dup_mmap: since anon_vma rmap
came in, try_to_unmap_one knows the vma without needing find_vma.  But add
a comment to note that here vma is inserted without mmap_sem.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:19 -07:00
Wolfgang Wander
1363c3cd86 [PATCH] Avoiding mmap fragmentation
Ingo recently introduced a great speedup for allocating new mmaps using the
free_area_cache pointer which boosts the specweb SSL benchmark by 4-5% and
causes huge performance increases in thread creation.

The downside of this patch is that it does lead to fragmentation in the
mmap-ed areas (visible via /proc/self/maps), such that some applications
that work fine under 2.4 kernels quickly run out of memory on any 2.6
kernel.

The problem is twofold:

  1) the free_area_cache is used to continue a search for memory where
     the last search ended.  Before the change new areas were always
     searched from the base address on.

     So now new small areas are cluttering holes of all sizes
     throughout the whole mmap-able region whereas before small holes
     tended to close holes near the base leaving holes far from the base
     large and available for larger requests.

  2) the free_area_cache also is set to the location of the last
     munmap-ed area so in scenarios where we allocate e.g.  five regions of
     1K each, then free regions 4 2 3 in this order the next request for 1K
     will be placed in the position of the old region 3, whereas before we
     appended it to the still active region 1, placing it at the location
     of the old region 2.  Before we had 1 free region of 2K, now we only
     get two free regions of 1K -> fragmentation.

The patch addresses thes issues by introducing yet another cache descriptor
cached_hole_size that contains the largest known hole size below the
current free_area_cache.  If a new request comes in the size is compared
against the cached_hole_size and if the request can be filled with a hole
below free_area_cache the search is started from the base instead.

The results look promising: Whereas 2.6.12-rc4 fragments quickly and my
(earlier posted) leakme.c test program terminates after 50000+ iterations
with 96 distinct and fragmented maps in /proc/self/maps it performs nicely
(as expected) with thread creation, Ingo's test_str02 with 20000 threads
requires 0.7s system time.

Taking out Ingo's patch (un-patch available per request) by basically
deleting all mentions of free_area_cache from the kernel and starting the
search for new memory always at the respective bases we observe: leakme
terminates successfully with 11 distinctive hardly fragmented areas in
/proc/self/maps but thread creating is gringdingly slow: 30+s(!) system
time for Ingo's test_str02 with 20000 threads.

Now - drumroll ;-) the appended patch works fine with leakme: it ends with
only 7 distinct areas in /proc/self/maps and also thread creation seems
sufficiently fast with 0.71s for 20000 threads.

Signed-off-by: Wolfgang Wander <wwc@rentec.com>
Credit-to: "Richard Purdie" <rpurdie@rpsys.net>
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu> (partly)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:16 -07:00
Martin Hicks
753ee72896 [PATCH] VM: early zone reclaim
This is the core of the (much simplified) early reclaim.  The goal of this
patch is to reclaim some easily-freed pages from a zone before falling back
onto another zone.

One of the major uses of this is NUMA machines.  With the default allocator
behavior the allocator would look for memory in another zone, which might be
off-node, before trying to reclaim from the current zone.

This adds a zone tuneable to enable early zone reclaim.  It is selected on a
per-zone basis and is turned on/off via syscall.

Adding some extra throttling on the reclaim was also required (patch
4/4).  Without the machine would grind to a crawl when doing a "make -j"
kernel build.  Even with this patch the System Time is higher on
average, but it seems tolerable.  Here are some numbers for kernbench
runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run:

			wall  user   sys   %cpu  ctx sw.  sleeps
			----  ----   ---   ----   ------  ------
No patch		1009  1384   847   258   298170   504402
w/patch, no reclaim     880   1376   667   288   254064   396745
w/patch & reclaim       1079  1385   926   252   291625   548873

These numbers are the average of 2 runs of 3 "make -j" runs done right
after system boot.  Run-to-run variability for "make -j" is huge, so
these numbers aren't terribly useful except to seee that with reclaim
the benchmark still finishes in a reasonable amount of time.

I also looked at the NUMA hit/miss stats for the "make -j" runs and the
reclaim doesn't make any difference when the machine is thrashing away.

Doing a "make -j8" on a single node that is filled with page cache pages
takes 700 seconds with reclaim turned on and 735 seconds without reclaim
(due to remote memory accesses).

The simple zone_reclaim syscall program is at
http://www.bork.org/~mort/sgi/zone_reclaim.c

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:14 -07:00
Ingo Molnar
39c715b717 [PATCH] smp_processor_id() cleanup
This patch implements a number of smp_processor_id() cleanup ideas that
Arjan van de Ven and I came up with.

The previous __smp_processor_id/_smp_processor_id/smp_processor_id API
spaghetti was hard to follow both on the implementational and on the
usage side.

Some of the complexity arose from picking wrong names, some of the
complexity comes from the fact that not all architectures defined
__smp_processor_id.

In the new code, there are two externally visible symbols:

 - smp_processor_id(): debug variant.

 - raw_smp_processor_id(): nondebug variant. Replaces all existing
   uses of _smp_processor_id() and __smp_processor_id(). Defined
   by every SMP architecture in include/asm-*/smp.h.

There is one new internal symbol, dependent on DEBUG_PREEMPT:

 - debug_smp_processor_id(): internal debug variant, mapped to
                             smp_processor_id().

Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new
lib/smp_processor_id.c file.  All related comments got updated and/or
clarified.

I have build/boot tested the following 8 .config combinations on x86:

 {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT}

I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT.  (Other
architectures are untested, but should work just fine.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:13 -07:00
David Woodhouse
f6a789d198 AUDIT: Spawn kernel thread to list filter rules.
If we have enough rules to fill the netlink buffer space, it'll 
deadlock because auditctl isn't ever actually going to read from the 
socket until we return, and we aren't going to return until it 
reads... so we spawn a kernel thread to spew out the list and then
exit.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-21 16:22:01 +01:00
Dmitry Torokhov
70f2817a43 [PATCH] sysfs: (rest) if show/store is missing return -EIO
sysfs: fix the rest of the kernel so if an attribute doesn't
       implement show or store method read/write will return
       -EIO instead of 0 or -EINVAL or -EPERM.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:03 -07:00
David Woodhouse
ae7b961b1c AUDIT: Report lookup flags with path/inode records.
When LOOKUP_PARENT is used, the inode which results is not the inode
found at the pathname. Report the flags so that this doesn't generate
misleading audit records.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-20 16:11:05 +01:00
David Woodhouse
f7056d64ae AUDIT: Really exempt auditd from having its actions audited.
We were only avoiding it on syscall exit before; now stop _everything_.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-20 16:07:33 +01:00
David Woodhouse
d6e0e1585a AUDIT: Drop user-generated messages immediately while auditing disabled.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-20 16:02:09 +01:00
David Woodhouse
0f45aa18e6 AUDIT: Allow filtering of user messages
Turn the field from a bitmask to an enumeration and add a list to allow 
filtering of messages generated by userspace. We also define a list for 
file system watches in anticipation of that feature.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-19 19:35:50 +01:00
David Woodhouse
0107b3cf32 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-06-18 08:36:46 +01:00
Ingo Molnar
caf2857ac6 [PATCH] timer exit cleanup
Do all timer zapping in exit_itimers.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-17 10:03:50 -07:00
Jan Kara
6df3cecbb9 [PATCH] cond_resched_lock() fix
On one path, cond_resched_lock() fails to return true if it dropped the lock.
We think this might be causing the crashes in JBD's log_do_checkpoint().

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-13 20:58:58 -07:00
David Woodhouse
1c3f45ab2f Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-06-02 16:39:11 +01:00
Roman Zippel
ae92ef8a44 [PATCH] flush icache in correct context
flush_icache_range() is used in two different situation - in binfmt_elf.c &
co for user space mappings and module.c for kernel modules.  On m68k
flush_icache_range() doesn't know which data to flush, as it has separate
address spaces and the pointer argument can be valid in either address
space.

First I considered splitting flush_icache_range(), but this patch is
simpler.  Setting the correct context gives flush_icache_range() enough
information to flush the correct data.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31 14:54:18 -07:00
John Hawkes
b60c1f6ffd [PATCH] drop note_interrupt() for per-CPU for proper scaling
The "unhandled interrupts" catcher, note_interrupt(), increments a global
desc->irq_count and grossly damages scaling of very large systems, e.g.,
>192p ia64 Altix, because of this highly contented cacheline, especially
for timer interrupts.  384p is severely crippled, and 512p is unuseable.

All calls to note_interrupt() can be disabled by booting with "noirqdebug",
but this disables the useful interrupt checking for all interrupts.

I propose eliminating note_interrupt() for all per-CPU interrupts.  This
was the behavior of linux-2.6.10 and earlier, but in 2.6.11 a code
restructuring added a call to note_interrupt() for per-CPU interrupts.
Besides, note_interrupt() is a bit racy for concurrent CPU calls anyway, as
the desc->irq_count++ increment isn't atomic (which, if done, would make
scaling even worse).

Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-28 11:14:00 -07:00
Paul Jackson
2efe86b809 [PATCH] cpuset exit NULL dereference fix
There is a race in the kernel cpuset code, between the code
to handle notify_on_release, and the code to remove a cpuset.
The notify_on_release code can end up trying to access a
cpuset that has been removed.  In the most common case, this
causes a NULL pointer dereference from the routine cpuset_path.
However all manner of bad things are possible, in theory at least.

The existing code decrements the cpuset use count, and if the
count goes to zero, processes the notify_on_release request,
if appropriate.  However, once the count goes to zero, unless we
are holding the global cpuset_sem semaphore, there is nothing to
stop another task from immediately removing the cpuset entirely,
and recycling its memory.

The obvious fix would be to always hold the cpuset_sem
semaphore while decrementing the use count and dealing with
notify_on_release.  However we don't want to force a global
semaphore into the mainline task exit path, as that might create
a scaling problem.

The actual fix is almost as easy - since this is only an issue
for cpusets using notify_on_release, which the top level big
cpusets don't normally need to use, only take the cpuset_sem
for cpusets using notify_on_release.

This code has been run for hours without a hiccup, while running
a cpuset create/destroy stress test that could crash the existing
kernel in seconds.  This patch applies to the current -linus
git kernel.

Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Simon Derr <simon.derr@bull.net>
Acked-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-27 08:07:26 -07:00
David Woodhouse
8f37d47c9b AUDIT: Record working directory when syscall arguments are pathnames
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-27 12:17:28 +01:00
David Woodhouse
7551ced334 AUDIT: Defer freeing aux items until audit_free_context()
While they were all just simple blobs it made sense to just free them
as we walked through and logged them. Now that there are pointers to
other objects which need refcounting, we might as well revert to
_only_ logging them in audit_log_exit(), and put the code to free them
properly in only one place -- in audit_free_aux().

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
----------------------------------------------------------
2005-05-26 12:04:57 +01:00
Kirill Korotaev
c33880aadd [PATCH] sigkill priority fix
If SIGKILL does not have priority, we cannot instantly kill task before it
makes some unexpected job.  It can be critical, but we were unable to
reproduce this easily until Heiko Carstens <Heiko.Carstens@de.ibm.com>
reported this problem on LKML.

Signed-Off-By: Kirill Korotaev <dev@sw.ru>
Signed-Off-By: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-24 20:08:13 -07:00
David Woodhouse
99e45eeac8 AUDIT: Escape comm when logging task info
It comes from the user; it needs to be escaped.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-23 21:57:41 +01:00
David Woodhouse
bccf6ae083 AUDIT: Unify auid reporting, put arch before syscall number
These changes make processing of audit logs easier. Based on a patch
from Steve Grubb <sgrubb@redhat.com>

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-23 21:35:28 +01:00
David Woodhouse
bfb4496e72 AUDIT: Assign serial number to non-syscall messages
Move audit_serial() into audit.c and use it to generate serial numbers 
on messages even when there is no audit context from syscall auditing.  
This allows us to disambiguate audit records when more than one is 
generated in the same millisecond.

Based on a patch by Steve Grubb after he observed the problem.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 21:08:09 +01:00
Samuel Thibault
10f02d1c59 [PATCH] spin_unlock_bh() and preempt_check_resched()
In _spin_unlock_bh(lock):
	do { \
		_raw_spin_unlock(lock); \
		preempt_enable(); \
		local_bh_enable(); \
		__release(lock); \
	} while (0)

there is no reason for using preempt_enable() instead of a simple
preempt_enable_no_resched()

Since we know bottom halves are disabled, preempt_schedule() will always
return at once (preempt_count!=0), and hence preempt_check_resched() is
useless here...

This fixes it by using "preempt_enable_no_resched()" instead of the
"preempt_enable()", and thus avoids the useless preempt_check_resched()
just before re-enabling bottom halves.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-21 10:46:48 -07:00
Steve Grubb
326e9c8ba6 AUDIT: Fix inconsistent use of loginuid vs. auid, signed vs. unsigned
The attached patch changes all occurrences of loginuid to auid. It also 
changes everything to %u that is an unsigned type.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 00:22:31 +01:00
Steve Grubb
05474106a4 AUDIT: Fix AVC_USER message passing.
The original AVC_USER message wasn't consolidated with the new range of
user messages. The attached patch fixes the kernel so the old messages 
work again.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 00:18:37 +01:00
Stephen Smalley
011161051b AUDIT: Avoid sleeping function in SElinux AVC audit.
This patch changes the SELinux AVC to defer logging of paths to the audit
framework upon syscall exit, by saving a reference to the (dentry,vfsmount)
pair in an auxiliary audit item on the current audit context for processing
by audit_log_exit.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 00:15:52 +01:00
Paul Jackson
b39c4fab25 [PATCH] cpusets+hotplug+preepmt broken
This patch removes the entwining of cpusets and hotplug code in the "No
more Mr.  Nice Guy" case of sched.c move_task_off_dead_cpu().

Since the hotplug code is holding a spinlock at this point, we cannot take
the cpuset semaphore, cpuset_sem, as would seem to be required either to
update the tasks cpuset, or to scan up the nested cpuset chain, looking for
the nearest cpuset ancestor that still has some CPUs that are online.  So
we just punt and blast the tasks cpus_allowed with all bits allowed.

This reverts these lines of code to what they were before the cpuset patch.
 And it updates the cpuset Doc file, to match.

The one known alternative to this that seems to work came from Dinakar
Guniguntala, and required the hotplug code to take the cpuset_sem semaphore
much earlier in its processing.  So far as we know, the increased locking
entanglement between cpusets and hot plug of this alternative approach is
not worth doing in this case.

Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-20 15:48:19 -07:00
David Woodhouse
fb19b4c6aa AUDIT: Honour audit_backlog_limit again.
The limit on the number of outstanding audit messages was inadvertently
removed with the switch to queuing skbs directly for sending by a kernel
thread. Put it back again.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 14:55:56 +01:00
David Woodhouse
7063e6c717 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-05-19 11:54:00 +01:00
David Woodhouse
7ca0026495 AUDIT: Quis Custodiet Ipsos Custodes?
Nobody does. Really, it gets very silly if auditd is recording its
own actions.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 11:23:13 +01:00
David Woodhouse
b7d1125817 AUDIT: Send netlink messages from a separate kernel thread
netlink_unicast() will attempt to reallocate and will free messages if
the socket's rcvbuf limit is reached unless we give it an infinite 
timeout. So do that, from a kernel thread which is dedicated to spewing
stuff up the netlink socket.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 10:56:58 +01:00
Steve Grubb
168b717395 AUDIT: Clean up logging of untrusted strings
* If vsnprintf returns -1, it will mess up the sk buffer space accounting. 
This is fixed by not calling skb_put with bogus len values.

* audit_log_hex was a loop that called audit_log_vformat with %02X for each 
character. This is very inefficient since conversion from unsigned character 
to Ascii representation is essentially masking, shifting, and byte lookups. 
Also, the length of the converted string is well known - it's twice the 
original. Fixed by rewriting the function.

* audit_log_untrustedstring had no comments. This makes it hard for 
someone to understand what the string format will be.

* audit_log_d_path was never fixed to use untrustedstring. This could mess
up user space parsers. This was fixed to make a temp buffer, call d_path, 
and log temp buffer using untrustedstring. 

From: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 10:24:22 +01:00
David Woodhouse
209aba0324 AUDIT: Treat all user messages identically.
It's silly to have to add explicit entries for new userspace messages
as we invent them. Just treat all messages in the user range the same.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-18 10:21:07 +01:00
David Brownell
82428b62aa [PATCH] Driver Core: pm diagnostics update, check for errors
This patch includes various tweaks in the messaging that appears during
system pm state transitions:

  * Warn about certain illegal calls in the device tree, like resuming
    child before parent or suspending parent before child.  This could
    happen easily enough through sysfs, or in some cases when drivers
    use device_pm_set_parent().

  * Be more consistent about dev_dbg() tracing ... do it for resume() and
    shutdown() too, and never if the driver doesn't have that method.

  * Say which type of system sleep state is being entered.

Except for the warnings, these only affect debug messaging.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17 14:54:54 -07:00
William Lee Irwin III
dfaa9c94b1 [PATCH] profile.c: `schedule' parsing fix
profile=schedule parsing is not quite what it should be.  First, str[7] is
'e', not ',', but then even if it did fall through, prof_on =
SCHED_PROFILING would be clobbered inside if (get_option(...)) So a small
amount of rearrangement is done in this patch to correct it.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:21 -07:00
Matt Mackall
3c0547ba8b [PATCH] add_preferred_console() build fix
Move add_preferred_console out of CONFIG_PRINTK so serial console does the
right thing.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:19 -07:00
Zhang, Yanmin
4f167fb491 [PATCH] spurious interrupt fix
On my IA64 machine, after kernel 2.6.12-rc3 boots, an edge-triggered
interrupt (IRQ 46) keeps triggered over and over again.  There is no IRQ 46
interrupt action handler.  It has lots of impact on performance.

Kernel 2.6.10 and its prior versions have no the problem.  Basically,
kernel 2.6.10 will mask the spurious edge interrupt if the interrupt is
triggered for the second time and its status includes
IRQ_DISABLE|IRQ_PENDING.

Originally, IA64 kernel has its own specific _irq_desc definitions in file
arch/ia64/kernel/irq.c.  The definition initiates _irq_desc[irq].status to
IRQ_DISABLE.  Since kernel 2.6.11, it was moved to architecture independent
codes, i.e.  kernel/irq/handle.c, but kernel/irq/handle.c initiates
_irq_desc[irq].status to 0 instead of IRQ_DISABLE.

Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:18 -07:00
David Woodhouse
3ec3b2fba5 AUDIT: Capture sys_socketcall arguments and sockaddrs
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-17 12:08:48 +01:00
David Woodhouse
5e014b10ef AUDIT: fix max_t thinko.
Der... if you use max_t it helps if you give it a type. 

Note to self: Always just apply the tested patches, don't try to port 
them by hand. You're not clever enough.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13 18:50:33 +01:00
Steve Grubb
23f32d18aa AUDIT: Fix some spelling errors
I'm going through the kernel code and have a patch that corrects 
several spelling errors in comments.

From: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13 18:35:15 +01:00
Steve Grubb
c04049939f AUDIT: Add message types to audit records
This patch adds more messages types to the audit subsystem so that audit 
analysis is quicker, intuitive, and more useful.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
---
I forgot one type in the big patch. I need to add one for user space 
originating SE Linux avc messages. This is used by dbus and nscd.

-Steve
---
Updated to 2.6.12-rc4-mm1.
-dwmw2

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13 18:17:42 +01:00
David Woodhouse
9ea74f0655 AUDIT: Round up audit skb expansion to AUDIT_BUFSIZ.
Otherwise, we will be repeatedly reallocating, even if we're only
adding a few bytes at a time. Pointed out by Steve Grubb.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13 16:35:19 +01:00
Chris Wright
c1b773d87e Add audit_log_type
Add audit_log_type to allow callers to specify type and pid when logging.
Convert audit_log to wrapper around audit_log_type.  Could have
converted all audit_log callers directly, but common case is default
of type AUDIT_KERNEL and pid 0.  Update audit_log_start to take type
and pid values when creating a new audit_buffer.  Move sequences that
did audit_log_start, audit_log_format, audit_set_type, audit_log_end,
to simply call audit_log_type directly.  This obsoletes audit_set_type
and audit_set_pid, so remove them.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11 10:55:10 +01:00
Chris Wright
197c69c6af Move ifdef CONFIG_AUDITSYSCALL to header
Remove code conditionally dependent on CONFIG_AUDITSYSCALL from audit.c.
Move these dependencies to audit.h with the rest.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11 10:54:05 +01:00
Chris Wright
804a6a49d8 Audit requires CONFIG_NET
Audit now actually requires netlink.  So make it depend on CONFIG_NET, 
and remove the inline dependencies on CONFIG_NET.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11 10:52:45 +01:00
Chris Wright
5a241d7703 AUDIT: Properly account for alignment difference in nlmsg_len.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11 10:43:07 +01:00
David Woodhouse
eecb0a7338 AUDIT: Fix abuse of va_args.
We're not allowed to use args twice; we need to use va_copy.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-10 18:58:51 +01:00
David Woodhouse
e3b926b4c1 AUDIT: pass size argument to audit_expand().
Let audit_expand() know how much it's expected to grow the buffer, in 
the case that we have that information to hand.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-10 18:56:08 +01:00
Steve Grubb
8c5aa40c94 AUDIT: Fix reported length of audit messages.
We were setting nlmsg_len to skb->len, but we should be subtracting
the size of the header.

From: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-10 18:53:07 +01:00
David Woodhouse
4332bdd332 AUDIT: Honour gfp_mask in audit_buffer_alloc()
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06 15:59:57 +01:00
Chris Wright
5ac52f33b6 AUDIT: buffer audit msgs directly to skb
Drop the use of a tmp buffer in the audit_buffer, and just buffer
directly to the skb.  All header data that was temporarily stored in
the audit_buffer can now be stored directly in the netlink header in
the skb.  Resize skb as needed.  This eliminates the extra copy (and
the audit_log_move function which was responsible for copying).

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06 15:54:53 +01:00
Chris Wright
8fc6115c2a AUDIT: expand audit tmp buffer as needed
Introduce audit_expand and make the audit_buffer use a dynamic buffer
which can be resized.  When audit buffer is moved to skb it will not
be fragmented across skb's, so we can eliminate the sklist in the
audit_buffer.  During audit_log_move, we simply copy the full buffer
into a single skb, and then audit_log_drain sends it on.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06 15:54:17 +01:00
Chris Wright
16e1904e69 AUDIT: Add helper functions to allocate and free audit_buffers.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06 15:53:34 +01:00
Steve Grubb
c2f0c7c356 The attached patch addresses the problem with getting the audit daemon
shutdown credential information. It creates a new message type 
AUDIT_TERM_INFO, which is used by the audit daemon to query who issued the 
shutdown. 

It requires the placement of a hook function that gathers the information. The 
hook is after the DAC & MAC checks and before the function returns. Racing 
threads could overwrite the uid & pid - but they would have to be root and 
have policy that allows signalling the audit daemon. That should be a 
manageable risk.

The userspace component will be released later in audit 0.7.2. When it 
receives the TERM signal, it queries the kernel for shutdown information. 
When it receives it, it writes the message and exits. The message looks 
like this:

type=DAEMON msg=auditd(1114551182.000) auditd normal halt, sending pid=2650 
uid=525, auditd pid=1685

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06 12:38:39 +01:00
Domen Puncer
ebe8b54134 [PATCH] correctly name the Shell sort
As per http://www.nist.gov/dads/HTML/shellsort.html, this should be
referred to as a Shell sort.  Shell-Metzner is a misnomer.

Signed-off-by: Daniel Dickman <didickman@yahoo.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:50 -07:00
Paulo Marques
b7e4e85337 [PATCH] setitimer timer expires too early
It seems that the code responsible for this is in kernel/itimer.c:126:

	p->signal->real_timer.expires = jiffies + interval;
	add_timer(&p->signal->real_timer);

If you request an interval of, lets say 900 usecs, the interval given by
timeval_to_jiffies will be 1.

If you request this when we are half-way between two timer ticks, the
interval will only give 400 usecs.

If we want to guarantee that we never ever give intervals less than
requested, the simple solution would be to change that to:

	p->signal->real_timer.expires = jiffies + interval + 1;

This however will produce pathological cases, like having a idle system
being requested 1 ms timeouts will give systematically 2 ms timeouts,
whereas currently it simply gives a few usecs less than 1 ms.

The complex (and more computationally expensive) solution would be to
check the gettimeofday time, and compute the correct number of jiffies.
This way, if we request a 300 usecs timer 200 usecs inside the timer
tick, we can wait just one tick, but not if we are 800 usecs inside the
tick. This would also mean that we would have to lock preemption during
these computations to avoid races, etc.

I've searched the archives but couldn't find this particular issue being
discussed before.

Attached is a patch to do the simple solution, in case anybody thinks
that it should be used.

Signed-Off-By: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:41 -07:00
Ananth N Mavinakayanahalli
64f562c6df [PATCH] kprobes: Allow multiple kprobes at the same address
Allow registration of multiple kprobes at an address in an architecture
agnostic way.  Corresponding handlers will be invoked in a sequence.  But,
a kprobe and a jprobe can't (yet) co-exist at the same address.

Signed-off-by: Ananth N Mavinakayanahalli <amavin@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:39 -07:00
Prasanna S Panchamukhi
04dea5f932 [PATCH] Kprobes: Oops! in unregister_kprobe()
kernel oops!  when unregister_kprobe() is called on a non-registered
kprobe.  This patch fixes the above problem by checking if the probe exists
before unregistering.

Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:39 -07:00
Anton Blanchard
7d12e522ba [PATCH] ppc64: remove hidden -fno-omit-frame-pointer for schedule.c
While looking at code generated by gcc4.0 I noticed some functions still
had frame pointers, even after we stopped ppc64 from defining
CONFIG_FRAME_POINTER.  It turns out kernel/Makefile hardwires
-fno-omit-frame-pointer on when compiling schedule.c.

Create CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER and define it on architectures
that dont require frame pointers in sched.c code.

(akpm: blame me for the name)

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:32 -07:00
David Woodhouse
075d6eb16d [PATCH] ppc32: platform-specific functions missing from kallsyms.
The PPC32 kernel puts platform-specific functions into separate sections so
that unneeded parts of it can be freed when we've booted and actually
worked out what we're running on today.

This makes kallsyms ignore those functions, because they're not between
_[se]text or _[se]inittext.  Rather than teaching kallsyms about the
various pmac/chrp/etc sections, this patch adds '_[se]extratext' markers
for kallsyms.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:31 -07:00
David Woodhouse
bfd4bda097 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-05-05 13:59:37 +01:00
Linus Torvalds
897f5ab2cd Automatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git 2005-05-04 19:52:45 -07:00
Herbert Xu
2a0a6ebee1 [NETLINK]: Synchronous message processing.
Let's recap the problem.  The current asynchronous netlink kernel
message processing is vulnerable to these attacks:

1) Hit and run: Attacker sends one or more messages and then exits
before they're processed.  This may confuse/disable the next netlink
user that gets the netlink address of the attacker since it may
receive the responses to the attacker's messages.

Proposed solutions:

a) Synchronous processing.
b) Stream mode socket.
c) Restrict/prohibit binding.

2) Starvation: Because various netlink rcv functions were written
to not return until all messages have been processed on a socket,
it is possible for these functions to execute for an arbitrarily
long period of time.  If this is successfully exploited it could
also be used to hold rtnl forever.

Proposed solutions:

a) Synchronous processing.
b) Stream mode socket.

Firstly let's cross off solution c).  It only solves the first
problem and it has user-visible impacts.  In particular, it'll
break user space applications that expect to bind or communicate
with specific netlink addresses (pid's).

So we're left with a choice of synchronous processing versus
SOCK_STREAM for netlink.

For the moment I'm sticking with the synchronous approach as
suggested by Alexey since it's simpler and I'd rather spend
my time working on other things.

However, it does have a number of deficiencies compared to the
stream mode solution:

1) User-space to user-space netlink communication is still vulnerable.

2) Inefficient use of resources.  This is especially true for rtnetlink
since the lock is shared with other users such as networking drivers.
The latter could hold the rtnl while communicating with hardware which
causes the rtnetlink user to wait when it could be doing other things.

3) It is still possible to DoS all netlink users by flooding the kernel
netlink receive queue.  The attacker simply fills the receive socket
with a single netlink message that fills up the entire queue.  The
attacker then continues to call sendmsg with the same message in a loop.

Point 3) can be countered by retransmissions in user-space code, however
it is pretty messy.

In light of these problems (in particular, point 3), we should implement
stream mode netlink at some point.  In the mean time, here is a patch
that implements synchronous processing.  

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-03 14:55:09 -07:00
Russ Anderson
012914dad2 [patch] MCA recovery module undefined symbol fix
The patch "MCA recovery improvements" added do_exit to mca_drv.c.
That's fine when the mca recovery code is built in the kernel
(CONFIG_IA64_MCA_RECOVERY=y) but breaks building the mca recovery
code as a module (CONFIG_IA64_MCA_RECOVERY=m).

Most users are currently building this as a module, as loading
and unloading the module provides a very convenient way to turn
on/off error recovery.

This patch exports do_exit, so mca_drv.c can build as a module.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-05-03 13:58:17 -07:00
Chris Wright
0dd8e06bda [PATCH] add new audit data to last skb
When adding more formatted audit data to an skb for delivery to userspace,
the kernel will attempt to reuse an skb that has spare room.  However, if
the audit message has already been fragmented to multiple skb's, the search
for spare room in the skb uses the head of the list.  This will corrupt the
audit message with trailing bytes being placed midway through the stream.
Fix is to look at the end of the list.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-03 14:01:15 +01:00
David Woodhouse
27b030d58c Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-05-03 08:14:09 +01:00
Adrian Bunk
408b664a7d [PATCH] make lots of things static
Another large rollup of various patches from Adrian which make things static
where they were needlessly exported.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:29 -07:00
Martin Waitz
67be2dd1ba [PATCH] DocBook: fix some descriptions
Some KernelDoc descriptions are updated to match the current code.
No code changes.

Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:26 -07:00
Pavel Pisa
4dc3b16ba1 [PATCH] DocBook: changes and extensions to the kernel documentation
I have recompiled Linux kernel 2.6.11.5 documentation for me and our
university students again.  The documentation could be extended for more
sources which are equipped by structured comments for recent 2.6 kernels.  I
have tried to proceed with that task.  I have done that more times from 2.6.0
time and it gets boring to do same changes again and again.  Linux kernel
compiles after changes for i386 and ARM targets.  I have added references to
some more files into kernel-api book, I have added some section names as well.
 So please, check that changes do not break something and that categories are
not too much skewed.

I have changed kernel-doc to accept "fastcall" and "asmlinkage" words reserved
by kernel convention.  Most of the other changes are modifications in the
comments to make kernel-doc happy, accept some parameters description and do
not bail out on errors.  Changed <pid> to @pid in the description, moved some
#ifdef before comments to correct function to comments bindings, etc.

You can see result of the modified documentation build at
  http://cmp.felk.cvut.cz/~pisa/linux/lkdb-2.6.11.tar.gz

Some more sources are ready to be included into kernel-doc generated
documentation.  Sources has been added into kernel-api for now.  Some more
section names added and probably some more chaos introduced as result of quick
cleanup work.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:25 -07:00
Jesper Juhl
7ed20e1ad5 [PATCH] convert that currently tests _NSIG directly to use valid_signal()
Convert most of the current code that uses _NSIG directly to instead use
valid_signal().  This avoids gcc -W warnings and off-by-one errors.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:14 -07:00
Stephen Rothwell
7d87e14c23 [PATCH] consolidate sys_shmat
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:12 -07:00
Paul E. McKenney
fbd568a3e6 [PATCH] Change synchronize_kernel to _rcu and _sched
This patch changes calls to synchronize_kernel(), deprecated in the earlier
"Deprecate synchronize_kernel, GPL replacement" patch to instead call the new
synchronize_rcu() and synchronize_sched() APIs.

Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:04 -07:00
Paul E. McKenney
9b06e81898 [PATCH] Deprecate synchronize_kernel, GPL replacement
The synchronize_kernel() primitive is used for quite a few different purposes:
waiting for RCU readers, waiting for NMIs, waiting for interrupts, and so on.
This makes RCU code harder to read, since synchronize_kernel() might or might
not have matching rcu_read_lock()s.  This patch creates a new
synchronize_rcu() that is to be used for RCU readers and a new
synchronize_sched() that is used for the rest.  These two new primitives
currently have the same implementation, but this is might well change with
additional real-time support.  Both new primitives are GPL-only, the old
primitive is deprecated.

Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:04 -07:00
Paul E. McKenney
66cf8f1443 [PATCH] kernel/rcupdate.c: make the exports EXPORT_SYMBOL_GPL
The gpl exports need to be put back.  Moving them to GPL -- but in a
measured manner, as I proposed on this list some months ago -- is fine.
Changing these particular exports precipitously is most definitely -not-
fine.  Here is my earlier proposal:

	http://marc.theaimsgroup.com/?l=linux-kernel&m=110520930301813&w=2

See below for a patch that puts the exports back, along with an updated
version of my earlier patch that starts the process of moving them to GPL.
I will also be following this message with RFC patches that introduce two
(EXPORT_SYMBOL_GPL) interfaces to replace synchronize_kernel(), which then
becomes deprecated.

Signed-off-by: <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:03 -07:00
Matt Mackall
d59745ce3e [PATCH] clean up kernel messages
Arrange for all kernel printks to be no-ops.  Only available if
CONFIG_EMBEDDED.

This patch saves about 375k on my laptop config and nearly 100k on minimal
configs.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:02 -07:00
Matt Mackall
e43379f10b [PATCH] nice and rt-prio rlimits
Add a pair of rlimits for allowing non-root tasks to raise nice and rt
priorities. Defaults to traditional behavior. Originally written by
Chris Wright.

The patch implements a simple rlimit ceiling for the RT (and nice) priorities
a task can set.  The rlimit defaults to 0, meaning no change in behavior by
default.  A value of 50 means RT priority levels 1-50 are allowed.  A value of
100 means all 99 privilege levels from 1 to 99 are allowed.  CAP_SYS_NICE is
blanket permission.

(akpm: see http://www.uwsg.iu.edu/hypermail/linux/kernel/0503.1/1921.html for
tips on integrating this with PAM).

Signed-off-by: Matt Mackall <mpm@selenic.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:00 -07:00
akpm@osdl.org
d59dd4620f [PATCH] use smp_mb/wmb/rmb where possible
Replace a number of memory barriers with smp_ variants.  This means we won't
take the unnecessary hit on UP machines.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:47 -07:00
Linus Torvalds
c06fec5022 Remove bogus BUG() in kernel/exit.c
It's old sanity checking that may have been useful for debugging, but
is just bogus these days.

Noticed by Mattia Belletti.
2005-04-29 09:37:07 -07:00
Steve Grubb
456be6cd90 [AUDIT] LOGIN message credentials
Attached is a new patch that solves the issue of getting valid credentials 
into the LOGIN message. The current code was assuming that the audit context 
had already been copied. This is not always the case for LOGIN messages.

To solve the problem, the patch passes the task struct to the function that 
emits the message where it can get valid credentials.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 17:30:07 +01:00
Chris Wright
37509e749d [AUDIT] Requeue messages at head of queue, up to audit_backlog
If netlink_unicast() fails, requeue the skb back at the head of the queue
it just came from, instead of the tail. And do so unless we've exceeded
the audit_backlog limit; not according to some other arbitrary limit.

From: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 17:19:14 +01:00
Serge Hallyn
c94c257c88 Add audit uid to netlink credentials
Most audit control messages are sent over netlink.In order to properly
log the identity of the sender of audit control messages, we would like
to add the loginuid to the netlink_creds structure, as per the attached
patch.

Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 16:27:17 +01:00
85c8721ff3 audit: update pointer to userspace tools, remove emacs mode tags 2005-04-29 16:23:29 +01:00
Peter Martuccelli
c7fcb0ee74 [AUDIT] Avoid using %*.*s format strings.
They don't seem to work correctly (investigation ongoing), but we don't
actually need to do it anyway.

Patch from Peter Martuccelli <peterm@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 16:10:24 +01:00
Steve Grubb
d812ddbb89 [AUDIT] Fix signedness of 'serial' in various routines.
Attached is a patch that corrects a signed/unsigned warning. I also noticed
that we needlessly init serial to 0. That only needs to occur if the kernel
was compiled without the audit system.

-Steve Grubb

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 16:09:52 +01:00
2fd6f58ba6 [AUDIT] Don't allow ptrace to fool auditing, log arch of audited syscalls.
We were calling ptrace_notify() after auditing the syscall and arguments,
but the debugger could have _changed_ them before the syscall was actually
invoked. Reorder the calls to fix that.

While we're touching ever call to audit_syscall_entry(), we also make it
take an extra argument: the architecture of the syscall which was made,
because some architectures allow more than one type of syscall.

Also add an explicit success/failure flag to audit_syscall_exit(), for
the benefit of architectures which return that in a condition register
rather than only returning a single register.

Change type of syscall return value to 'long' not 'int'.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 16:08:28 +01:00
Andrew Morton
81b7854d52 audit_log_untrustedstring() warning fix
kernel/audit.c: In function `audit_log_untrustedstring':
kernel/audit.c:736: warning: comparison is always false due to limited range of data type

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 15:59:11 +01:00
83c7d09173 AUDIT: Avoid log pollution by untrusted strings.
We log strings from userspace, such as arguments to open(). These could
be formatted to contain \n followed by fake audit log entries. Provide
a function for logging such strings, which gives a hex dump when the
string contains anything but basic printable ASCII characters. Use it
for logging filenames.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 15:54:44 +01:00
Christoph Lameter
9acf6597c5 [PATCH] time interpolator: Fix settimeofday inaccuracy
settimeofday will set the time a little bit too early on systems using
time interpolation since it subtracts the current interpolator offset
from the time. This used to be necessary with the code in 2.6.9 and earlier
but the new code resets the time interpolator after setting the time.
Thus the time is set too early and gettimeofday will return a time slightly
before the time specified with settimeofday if invoked immeditely after
settimeofday.

This removes the obsolete subtraction of the time interpolator offset
and makes settimeofday set the time accurately. 

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-28 08:13:58 -07:00
Tom 'spot' Callaway
a271c241a6 [SPARC]: Stop-A printk cleanup
This patch is incredibly trivial, but it does resolve some of the user
confusion as to what "L1-A" actually is.

Clarify printk message to refer to Stop-A (L1-A).

Gentoo has a virtually identical patch in their kernel sources.

Signed-off-by: Tom 'spot' Callaway <tcallawa@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-24 20:38:02 -07:00
Ingo Molnar
238628edb6 [PATCH] sched: fix signed comparisons of long long
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-18 10:58:36 -07:00
Stephen Smalley
219f081703 [PATCH] SELinux: fix deadlock on dcache lock
This fixes a deadlock on the dcache lock detected during testing at IBM
by moving the logging of the current executable information from the
SELinux avc_audit function to audit_log_exit (via an audit_log_task_info
helper) for processing upon syscall exit. 

For consistency, the patch also removes the logging of other
task-related information from avc_audit, deferring handling to
audit_log_exit instead. 

This allows simplification of the avc_audit code, allows the exe
information to be obtained more reliably, always includes the comm
information (useful for scripts), and avoids including bogus task
information for checks performed from irq or softirq. 

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by:  James Morris <jmorris@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-18 10:47:35 -07:00
Coywolf Qi Hunt
6c46ada700 [PATCH] reparent_to_init cleanup
This patch hides reparent_to_init().  reparent_to_init() should only be
called by daemonize().

Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:01 -07:00
Benoit Boissinot
9a8488965d [PATCH] cpuset: remove function attribute const
gcc-4 warns with
include/linux/cpuset.h:21: warning: type qualifiers ignored on function
return type

cpuset_cpus_allowed is declared with const
extern const cpumask_t cpuset_cpus_allowed(const struct task_struct *p);

First const should be __attribute__((const)), but the gcc manual
explains that:

"Note that a function that has pointer arguments and examines the data
pointed to must not be declared const. Likewise, a function that calls a
non-const function usually must not be const. It does not make sense for
a const function to return void."

The following patch remove const from the function declaration.

Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:59 -07:00
Lennert Buytenhek
b52402c783 [PATCH] pci enumeration on ixp2000: overflow in kernel/resource.c
IXP2000 (ARM-based) platforms use a separate 'struct resource' for PCI MEM
space.  Resource allocation for PCI BARs always fails because the 'root'
resource (the IXP2000 PCI MEM resource) always has the entire address space
(00000000-ffffffff) free, and find_resource() calculates the size of that
range as ffffffff-00000000+1=0, so all allocations fail because it thinks
there is no space.

(akpm: pls. double-check)

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:58 -07:00
Christoph Hellwig
6cae60feb6 [PATCH] kill #ifndef HAVE_ARCH_GET_SIGNAL_TO_DELIVER in signal.c
Now that no architectures defines HAVE_ARCH_GET_SIGNAL_TO_DELIVER anymore
this can go away.  It was a transitional hack only.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:47 -07:00
Bert Wesarg
31143a1204 [PATCH] kernel/param.c: don't use .max when .num is NULL in param_array_set()
there seems to be a bug, at least for me, in kernel/param.c for arrays with
.num == NULL.  If .num == NULL, the function param_array_set() uses &.max
for the call to param_array(), wich alters the .max value to the number of
arguments.  The result is, you can't set more array arguments as the last
time you set the parameter.

example:

# a module 'example' with
# static int array[10] = { 0, };
# module_param_array(array, int, NULL, 0644);

$ insmod example.ko array=1,2,3
$ cat /sys/module/example/parameters/array
1,2,3
$ echo "4,3,2,1" > /sys/module/example/parameters/array
$ dmesg | tail -n 1
kernel: array: can take only 3 arguments

Signed-off-by: Bert Wesarg <wesarg@informatik.uni-halle.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:42 -07:00
Alexander Nyberg
43117a0828 [PATCH] swsusp: SMP fix
Fix some smp_processor_id-in-preemptible warnings

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:39 -07:00
David S. Miller
51410d3c53 [PATCH] Fix get_compat_sigevent()
I have no idea how a bug like this lasted so long.  Anyways, obvious
memset()'ing of incorrect pointer.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:24:01 -07:00
James Bottomley
81ddef77bb [PATCH] re-export cancel_rearming_delayed_workqueue
This was unexported by Arjan because we have no current users.

However, during a conversion from tasklets to workqueues of the parisc led
functions, we ran across a case where this was needed.  In particular, the
open coded equivalent of cancel_rearming_delayed_workqueue was implemented
incorrectly, which is, I think, all the evidence necessary that this is a
useful API.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:23:59 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00