Commit Graph

114 Commits

Author SHA1 Message Date
Linus Torvalds
5a7d8a2808 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This has been sitting in -next for a while with no objections and all
  MIPS defconfigs except one are building fine; that one platform got
  broken by another patch in your tree and I'm going to submit a patch
  separately.

   - a handful of fixes that didn't make 3.11
   - a few bits of Octeon 3 support with more to come for a later
     release
   - platform enhancements for Octeon, ath79, Lantiq, Netlogic and
     Ralink SOCs
   - a GPIO driver for the Octeon
   - some dusting off of the DECstation code
   - the usual dose of cleanups"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (65 commits)
  MIPS: DMA: Fix BUG due to smp_processor_id() in preemptible code
  MIPS: kexec: Fix random crashes while loading crashkernel
  MIPS: kdump: Skip walking indirection page for crashkernels
  MIPS: DECstation HRT calibration bug fixes
  MIPS: Export copy_from_user_page() (needed by lustre)
  MIPS: Add driver for the built-in PCI controller of the RT3883 SoC
  MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000
  MIPS: ralink: Add support for reset-controller API
  MIPS: ralink: mt7620: Add cpu-feature-override header
  MIPS: ralink: mt7620: Add spi clock definition
  MIPS: ralink: mt7620: Add wdt clock definition
  MIPS: ralink: mt7620: Improve clock frequency detection
  MIPS: ralink: mt7620: This SoC has EHCI and OHCI hosts
  MIPS: ralink: mt7620: Add verbose ram info
  MIPS: ralink: Probe clocksources from OF
  MIPS: ralink: Add support for systick timer found on newer ralink SoC
  MIPS: ralink: Add support for periodic timer irq
  MIPS: Netlogic: Built-in DTB for XLP2xx SoC boards
  MIPS: Netlogic: Add support for USB on XLP2xx
  MIPS: Netlogic: XLP2xx update for I2C controller
  ...
2013-09-12 16:14:49 -07:00
Stuart Longland
7848ea7902 kbuild: Add MIPS specific files to generated package.
A lot of 64-bit systems supported by Linux/MIPS have boot firmware or
bootloaders that only understand 32-bit ELF files, and as such, the vmlinux.32
target exists to support these systems.  Therefore, it'd be nice if the tar-pkg
target recognised this, and included the right version when packaging up a
binary of the kernel.

This updates buildtar to support MIPS targets.  MIPS may use 'vmlinux'
or 'vmlinux.32' depending on the target system.  This uses 'vmlinux.32'
in preference to 'vmlinux' where present (although I should check which
is newer), including either file as /boot/vmlinux-${version}.

Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1673/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-08-26 15:31:54 +02:00
Heinrich Schuchardt
95e2a7d807 Provide version number for Debian firmware package
scripts/package/builddeb is used to create Debian packages.
Currently the firmware package always gets the same version number
irrespective of the Kernel version.
The paths inside the firmware package depend on the Kernel
version.

With the patch supplied the Kernel version becomes part of the
Debian firmware package number.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-08-15 18:01:18 +02:00
Anisse Astier
c95182bf9b deb-pkg: add a hook argument to match debian hooks parameters
We now provide the installed image path to the kernel hooks.

This should allow the package to better integrate with debian hooks, and
should not be too disruptive of hooks supporting only one parameter.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-24 15:50:24 +02:00
Anisse Astier
9de7017644 deb-pkg: fix installed image path on parisc, mips and powerpc
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-24 15:50:23 +02:00
Anisse Astier
810e843746 deb-pkg: split debug symbols in their own package
This can reduce almost 3 times the size of the linux-image package,
while keeping the debug symbols available for this particular build, in
their own package.

This mimics the way kernels are built in debian, ubuntu, or with
make-kpkg, and comes at the price of a small slowdown in the building of
packages.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-24 15:50:23 +02:00
Anisse Astier
d20917670e deb-pkg: use KCONFIG_CONFIG instead of .config file directly
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-24 15:50:23 +02:00
Mike Marciniszyn
2174d29201 rpm-pkg: add generation of kernel-devel
Change the spec file to generate a kernel-devel module
allowing for compilation of external kernel modules.

This patch requires a new minimum RPM level of 4.0.3.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-23 14:36:44 +02:00
Mike Marciniszyn
41612378da rpm-pkg: install firmware files in kernel relative directory
Prior to this patch, firmware files were being installed
in /lib/firmware with a potential conflict with already
installed kernels.

firmware files are now installed in /lib/firmware/<release>
and packaged with the rest of the modules.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-23 14:36:44 +02:00
Mike Marciniszyn
3c9c7a14b6 rpm-pkg: add %post section to create initramfs and grub hooks
/sbin/installkernel is used to insure grub hooks are
inserted and the initramfs is created on the
target system.

The invokation installkernel will work with any
kernel as long as:
- /sbin/installkernel exists
- the kernel and sysem map files are readable

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-07-23 14:36:44 +02:00
Linus Torvalds
cb63fc2662 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:
 - fix for make headers_install argv explosion with too long path
 - scripts/setlocalversion does not call git update-index needlessly
 - fix for the src.rpm produced by make rpm-pkg.  The new make
   image_name can be useful also for other packaging tools.
 - scripts/mod/devicetable-offsets.o is not rebuilt during each make run
 - make modules_install dependency fix
 - scripts/sortextable portability fix
 - fix for kbuild to generate the output directory for all object files
   in subdirs.
 - a couple of minor fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: create directory for dir/file.o
  tools/include: use stdint types for user-space byteshift headers
  Makefile: Fix install error with make -j option
  Fix a build warning in scripts/mod/file2alias.c
  improve modalias building
  scripts/mod: Spelling s/DEVICEVTABLE/DEVICETABLE/
  kbuild: fix error when building from src rpm
  scripts/setlocalversion on write-protected source tree
  Makefile.lib: align DTB quiet_cmd
  kbuild: fix make headers_install when path is too long
2013-07-10 16:05:40 -07:00
Mike Marciniszyn
c398ff00f5 kbuild: fix error when building from src rpm
The following issue can be reproduced with Linus' tree on
an x86_64 server.

>+ cp /home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2.x86_64/boot/vmlinuz-3.9.2
>cp: missing destination file operand after
>/home/user/rpmbuild-test/BUILDROOT/kernel-3.9.2-1.x86_64/boot/vmlinuz-3.9.2'
>Try `cp --help' for more information.
>error: Bad exit status from /var/tmp/rpm-tmp.R4o0iI (%install)

Here are the commands to reproduce:

make defconfig
make rpm-pkg

Use the resulting src rpm to build as follows:

mkdir ~/rpmbuild-test
cd ~/rpmbuild-test
rpmbuild --rebuild --define "_topdir `pwd`" -vv ~/rpmbuild/SRPMS/kernel-3.10.0_rc1+-1.src.rpm

The issue is because the %install script uses $KBUILD_IMAGE and it hasn't
been set since it is only available in the kbuild system and not in the
%install script.

This patch adds a Makefile target to emit the image_name that can be used
and modifies the mkspec to use the dynamic name in %install.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-24 15:26:14 +02:00
Luiz Capitulino
f66ba56094 package: Makefile: unbreak binrpm-pkg target
Commit 6501320311 dropped the rpm spec as a
prerequisite for the binrpm-pkg target but forgot to update $< usage,
which causes the rule to break.

This commit fixes that by replacing $< with the spec name.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-05-16 09:46:45 +02:00
Michal Marek
a0f9c6f202 rpm-pkg: Remove pointless set -e statements
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-18 14:56:54 +02:00
Michal Marek
6501320311 rpm-pkg: Always regenerate the specfile
The *pkg targets are always run, so it makes no sense to cache the
generated specfile. This also fixes build errors when the specfile
becomes out of date, without the Makefile noticing it:

$ make rpm
  works
$ echo yadadada >localversion-test
$ make rpm
  fails, because kernel.spec assumes the old kernel release string

Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-18 14:56:54 +02:00
Michal Marek
403d3cc473 rpm-pkg: Do not write to the parent directory
Now that we only package explicitly listed files to the tarball, there
is no need to abuse the parent directory.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-18 14:56:53 +02:00
Michal Marek
6615d6c322 rpm-pkg: Do not package the whole source directory
The source tree can contain lots of uninteresting data like tag or
cscope files, packaging which slows down make rpm needlessly. It can
also break the build, if the tree contains an unrelated file named
*.spec. The downside of this change is that new subdirectories have to
be added to the KBUILD_ALLDIRS variable in the top-level Makefile. The
upside is that the behavior is more predictable.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-18 14:56:44 +02:00
Borislav Petkov
6bc6c9409d buildtar: Add ARCH to the archive name
When dealing with multiple sub-arches (like 32- and 64-bit on x86, for
example) generating a bunch of kernel tar archives with the same name
but for different sub-arches could get confusing and error-prone. Also,
the build process could overwrite otherwise unrelated builds and you
probably don't want that. So, add the architecture to the archive name
for more clarity and less shoot-yourself-in-the-foot practices.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-08 16:04:28 +02:00
Bin Wang
4c6e00cffc scripts/package/Makefile: compare objtree with srctree instead of test KBUILD_OUTPUT
KBUILD_OUTPUT is always empty here, so it is useless to test it. But
while use O=.., objtree and srctree will be different. I compare them
instead.

Signed-off-by: Bin Wang <wbin00@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-08 13:04:17 +02:00
David R. Bild
e0367a6156 kbuild: clear KBUILD_SRC when calling 'make' in RPM spec
'make rpm-pkg' and 'make binrpm-pkg' fail when the kernel source is
read-only.  Specifically, when the RPM spec generated by
scripts/package/mkspec is run, KBUILD_SRC happens to be set to the
source location and thus the invocation of 'make headers_install'
fails when an internal call to 'filechk' tries to write a file into
the source tree.

The fix is to clear KBUILD_SRC for the 'make headers_install'
invocation in the spec file, as is already done for the 'make
modules_install' invocation.

Signed-off-by: David R. Bild <drbild@umich.edu>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-02-22 10:57:32 +01:00
Linus Torvalds
ae3e462828 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild changes from Michal Marek:
 "The main part of kbuild for v3.7 contains:
   - Fix for scripts/Makefile.modpost to not choke on a '.ko' substring
     in the build directory path
   - Two warning fixes (modpost and main Makefile)
   - __compiletime_error works also with gcc 4.3
   - make tar{gz,bz2,xz}-pkg uses default compression settings instead
     of saving as many bytes as possible (this should actually be in the
     misc branch, I don't know why I applied it here)."

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  compiler-gcc4.h: correct verion check for __compiletime_error
  modpost: Permit .GCC.command.line sections
  Kbuild: use normal compression settings for tar*-pkg
  scripts/Makefile.modpost: error in finding modules from .mod files.
  kbuild: Remove useless warning while appending KCFLAGS
2012-10-12 10:27:27 +09:00
Andi Kleen
b589c8ae09 Kbuild: use normal compression settings for tar*-pkg
For large kernel configurations (like a distribution kernel)
targz-pkg takes a quite long time to just do the compression.
I clocked it at 15+mins for a SUSE kernel like config on a fast
system.  And tarxz and bzip2 are even slower.

The main reason is that the script that is doing the taring sets
the highest compression level (-9).  When I change it to just
use the defaults the gzip time for the same kernel goes down
to ~3 mins. I haven't tested xz and bzip, but I expect those
to be much faster too.

I'm not willing to wait that long for a small compression
gain. So just change the script to use the defaults.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-27 16:56:59 +02:00
Michal Marek
fe04ddf7c2 kbuild: Do not package /boot and /lib in make tar-pkg
There were reports of users destroying their Fedora installs by a kernel
tarball that replaces the /lib -> /usr/lib symlink. Let's remove the
toplevel directories from the tarball to prevent this from happening.

Reported-by: Andi Kleen <andi@firstfloor.org>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-27 16:26:19 +02:00
maximilian attems
5f011d7159 deb-pkg: Add all Makefiles to header package
I discovered that make deb-pkg does not add Makefile_32.cpu from
arch/x86 directory when doing i386 kernel build and package build.
Fix it by greedily adding all Makefiles.

Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-06-28 10:48:08 +02:00
maximilian attems
6607ddadf9 deb-pkg: Install linux-firmware-image in versioned dir
That way they don't file conflict with official firmware package:
 trying to overwrite '/lib/firmware/qlogic/1040.bin', which is
               also in package firmware-qlogic 0.35
..

Reported-by: Michael Prokop <mika@debian.org>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-06-28 10:46:25 +02:00
Lekensteyn
19a4b98895 builddeb: include autogenerated header files
After 303395ac3b, some headers are
autogenerated. Include these autogenerated headers (mainly
unistd_32_ia32.h) in out-of-tree builds to allow DKMS modules to be
built succesfully.

Signed-off-by: Peter Lekensteyn <lekensteyn@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-05-26 22:54:50 +02:00
Joerg Roedel
dddcbb7ce3 kbuild: Fix out-of-tree build for 'make deb-pkg'
The out-of-tree build is broken in 'make deb-pkg'. The
header checks and the header install works on the source and
not on the object tree.
While fixing this also replace the direct 'make' invocations
with the $MAKE variable to be consistent within the script.

Cc: maximilian attems <max@stro.at>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: debian-kernel@lists.debian.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-02-25 00:01:28 +01:00
Joerg Roedel
d7d357bc27 kbuild: Only build linux-image package for UML
For user-mode Linux the other packages are not required. So
only build the package with the linux-image in it.

Cc: maximilian attems <max@stro.at>
Cc: debian-kernel@lists.debian.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Tested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-02-24 23:55:23 +01:00
Joerg Roedel
a47b6c61f5 kbuild: Fix link to headers in 'make deb-pkg'
The Link to the kernel header files in the debian packages
point to the original build directory. This is a bad choice
if the packages were installed on a different machine. Fix
this in by manually re-creating the link in the builddeb
script.

Cc: maximilian attems <max@stro.at>
Cc: debian-kernel@lists.debian.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-02-24 23:54:29 +01:00
Ben Hutchings
6c63522460 builddeb: Don't create files in /tmp with predictable names
The current use of /tmp for file lists is insecure.  Put them under
$objtree/debian instead.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org  # 2.6.39+
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-02-18 22:33:26 +01:00
Paul Menzel
0f60be20ca scripts/package/Makefile: Fix typo: an deb -> a deb
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-29 21:15:07 +02:00
matt mooney
3bdccc880b package: Makefile: fix perf target bug
Specify --git-dir when building perf targets to allow out-of-tree
builds using O=<build-dir>.

The shell command in `git archive' had to be modified to allow proper
file name expansion of the files listed in MANIFEST.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-06-24 15:20:55 +02:00
Linus Torvalds
62af8163f9 Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: Create a kernel-headers RPM
  rpm-pkg: Fix when current directory is a symlink
  Replace '-' in kernel version with '_'
2011-05-25 12:03:47 -07:00
Arun Sharma
0bd41dfc9f kbuild: Create a kernel-headers RPM
To compile binaries which depend on new kernel interfaces, we need a
kernel-headers RPM

Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-24 18:28:29 +02:00
Michal Marek
857c7e4387 rpm-pkg: Fix when current directory is a symlink
The better fix would be to stop using the parent directory (principle of
least surprise), but as long as we use it, use it consistently.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-24 17:44:00 +02:00
Arun Sharma
e1287eb891 Replace '-' in kernel version with '_'
Removing the '-' results in hard to read filenames such as:
kernel-2.6.35.2000042g76e4caf-28.x86_64.rpm

kernel-2.6.35.2_000042_g76e4caf-28.x86_64.rpm is easier to
read.

Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-04 23:07:48 +02:00
Lucas De Marchi
25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Zdenek Kaspar
9a17f40048 kbuild: Add make tarxz-pkg build option
Signed-off-by: Zdenek Kaspar <zkaspar82@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-09 16:18:06 +01:00
Michal Marek
2d8ad87195 Merge commit 'v2.6.38-rc1' into kbuild/packaging 2011-03-09 16:15:44 +01:00
Nicolas de Pesloüan
9b4ce7bce5 deb-pkg: Fix building outside of source tree (O=...).
When building linux-headers package using deb-pkg, builddeb erroneously assume
current directory is the source tree. This is not true if building in another
directory, using make O=... deb-pkg.

This patch fix this problem.

Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Tested-by: Nikolai Kondrashov <spbnick@gmail.com>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-02-04 14:53:45 +01:00
maximilian attems
1b9a50d931 deb-pkg: Use $SRCARCH for include path
Fix x86 centric path to allow building kernel-header packages for
other architecture.

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-15 00:42:44 +01:00
Linus Torvalds
1693ed284f Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  deb-pkg: s/hdr/kernel_headers_/ && s/header/libc_headers_/
  deb-pkg: Make deb-pkg generate a seperate linux-libc-dev deb
  kbuild: create linux-headers package in deb-pkg
  kbuild, deb-pkg: support overriding userland architecture
  kbuild, deb-pkg: select userland architecture based on UTS_MACHINE
  kbuild, deb-pkg: Fix build with paranoid umask
2011-01-10 08:28:38 -08:00
maximilian attems
ee81b786a0 deb-pkg: s/hdr/kernel_headers_/ && s/header/libc_headers_/
hdrpackage and headerpackage are not intuitive names,
use proposed alternatives by Michel Marek.

While touching them move the mkdir of the kernel_headers dir up
and fix it for paranoid umask.

CC: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-07 22:45:25 +01:00
maximilian attems
e68077856e deb-pkg: Make deb-pkg generate a seperate linux-libc-dev deb
userland dev likes latest incarnation of that userland API.
make it easy to also build it on make deb-pkg invocation:

dpkg-deb: building package `linux-libc-dev' in `../linux-libc-dev_2.6.32-rc6-4_amd64.deb'.

Last year patch rebased on top of latest deb-pkg changes.

Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-01-07 16:16:48 +01:00
Theodore Ts'o
cd8d60a20a kbuild: create linux-headers package in deb-pkg
Create a linux-headers-$KVER.deb package which can be used to build
external modules without having the source tree around.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-29 13:54:49 +01:00
Asbjoern Sloth Toennesen
55f88eccf9 kbuild, deb-pkg: support overriding userland architecture
Usefull if building for sparc64 userland, because the
sparc and sparc64 userlands use the same 64-bit kernel,
making it impossible to always select the correct userland
architecture for the resulting debian package.

Might also be usefull, if you want a i386 userland with a amd64 kernel.

Example usage:
	make KBUILD_DEBARCH=i386 deb-pkg

LKML-reference: <alpine.DEB.2.02.1011051437500.13287@aurora.sdinet.de>
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-20 16:52:31 +01:00
Asbjoern Sloth Toennesen
10f26fa642 kbuild, deb-pkg: select userland architecture based on UTS_MACHINE
Instead of creating the debian package for the compiling userland,
create it for a userland matching the kernel thats being compiled.

This patch supports all Lenny release architectures,
and Linux-based architecture candidates for Squeeze.

If it can't find a proper Debian userspace it displays a warning,
and fallback to let deb-gencontrol use the host's userspace arch.

Eg. with this patch the following make command:

	make ARCH=i386 deb-pkg

will output an i386 Debian package instead of an amd64 one,
when run on an amd64 machine.

Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-25 15:32:05 +01:00
maximilian attems
e86c2412c8 kbuild, deb-pkg: Fix build with paranoid umask
umask 077
make deb-pkg
<snipp ..>
dpkg-deb: building package `linux-image-2.6.36+' in `../linux-image-2.6.36+_2.6.36+-4_amd64.deb'.
dpkg-deb: control directory has bad permissions 700 (must be >=0755 and <=0775)
make[1]: *** [deb-pkg] Error 2

Reported-by: Bastian Blank <waldi@debian.org>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-11-11 16:32:43 +01:00
Linus Torvalds
2301b65b86 Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  scripts/package: don't break if %{_smp_mflags} isn't set
  kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it
2010-10-28 16:19:38 -07:00
Nishanth Aravamudan
c2d5a7300d scripts/package: don't break if %{_smp_mflags} isn't set
Same fix as in 13797b77d4 is needed for the "new"
line invoking _smp_mflags for modules_install. Without the fix, `make
binrpm-pkg` fails with:

+ make '%{_smp_mflags}' KBUILD_SRC= modules_install
make[2]: warning: jobserver unavailable: using -j1.  Add `+' to parent make rule.
make[2]: *** No rule to make target `%{_smp_mflags}'.  Stop.
error: Bad exit status from /var/tmp/rpm-tmp.8S9B9e (%install)

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-14 00:01:16 +02:00