Commit Graph

73 Commits

Author SHA1 Message Date
Kevin Hilman
c454194612 arm: Xilinx Zynq cleanup patches for v3.12
This branch contains these fixes:
 - SLCR cleanup
 - Hotplug cleanup
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iEYEABECAAYFAlITAu0ACgkQykllyylKDCEaRQCfSvHsoH+Pnucmj07bT63vCPLZ
 /iMAnRmVpjr2BR0nEoC2aFYGs2nprn/A
 =ueLK
 -----END PGP SIGNATURE-----

Merge tag 'zynq-cleanup-for-3.12' of git://git.xilinx.com/linux-xlnx into next/cleanup

From: Michal Simek:
arm: Xilinx Zynq cleanup patches for v3.12

This branch contains these fixes:
- SLCR cleanup
- Hotplug cleanup

* tag 'zynq-cleanup-for-3.12' of git://git.xilinx.com/linux-xlnx:
  arm: zynq: hotplug: Remove unreachable code
  arm: zynq: slcr: Use read-modify-write for register writes
  arm: zynq: slcr: Clean up #defines
  arm: zynq: slcr: Remove redundant header #includes

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-20 15:05:31 -07:00
Soren Brinkmann
b522877b53 arm: zynq: hotplug: Remove unreachable code
zynq_platform_do_lowpower() does never return. Hence remove
all code which relies on that function returning and consolidate the
remains.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-08-20 07:32:13 +02:00
Olof Johansson
8b2496a228 Here is the Samsung PWM cleanup series for you. Particular patches of the
series involve following modifications:
  1) fixing up few things in samsung_pwm_timer clocksource driver,
  2) moving remaining Samsung platforms to the new clocksource driver,
  3) removing old clocksource driver,
  4) adding new multiplatform- and DT-aware PWM driver,
  5) moving all Samsung platforms to use the new PWM driver,
  6) removing old PWM driver,
  7) removing all PWM-related code that is not used anymore.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.20 (GNU/Linux)
 
 iQIcBAABAgAGBQJSCT7XAAoJEIv3Hb8G/Xru/rcP/012END3oSxl+G1C0akZ+1Ko
 uZZXib9c1g7TzsE2lR1YRyZvKIylMEiETEupIf0gnliulSfQFKYN+0FMbqVfdYXZ
 fKYRA6rJV/b+lu6cY6E0Q12uXH1Cbrgk5Puqx09AXiR142E2DgCpt0A0aagYDff3
 P5nNxs1TcBTWcRdFgE5YytkdNtd9W5V87FEzctj4ENByXtayadcFPLjucmgfyrPo
 m763wmkoo6drnOnmpg+38yRKPm725tVami2Z0XN6FeFC7BYXa6VfqBdSkuhx8KDQ
 BbO2BUQeaLhpNM1LICfhD0w9VTXhPBLP1GA3qnNa9JCw+vO6dQEPwzMG9+gSKdqa
 jeFM9Vz11bqWfo5scI/5/tUxx2WOSqG3mq3LfMFKjRW6UCrUkVBYvBQCKHK6BF22
 Bnh5o5wpZDEHUJqjgdUeY+hjU6vhGTxa7VERZ1vBDn5h1EyLGq7YzLdEFdhaxRAk
 TShtoNXi7gD9JhoJkR5I4el5+I05sCdDS4NNNfoYTb2b/zxTpGzy+lZpBk3HuE+A
 fbe5zJVL4wsU88Li2vQ2oIUXOW2TIJDXAC1zV7N9GuIrDPxSPIoDcaFX68Ydfxy1
 h7jzXCxTgJdVXQV4An8aviQ4CIOtKkiWFoFlArS2CrroHhHYwhQznlwHQ1R7YTI1
 3ICxJdK4uPfQ1HQZQcxR
 =xmmW
 -----END PGP SIGNATURE-----

Merge tag 'v3.12-pwm-cleanup-for-olof' of git://github.com/tom3q/linux into next/cleanup

From Tomasz Figa:
Here is the Samsung PWM cleanup series. Particular patches of the series
involve following modifications:
 - fixing up few things in samsung_pwm_timer clocksource driver,
 - moving remaining Samsung platforms to the new clocksource driver,
 - removing old clocksource driver,
 - adding new multiplatform- and DT-aware PWM driver,
 - moving all Samsung platforms to use the new PWM driver,
 - removing old PWM driver,
 - removing all PWM-related code that is not used anymore.

* tag 'v3.12-pwm-cleanup-for-olof' of git://github.com/tom3q/linux: (684 commits)
  ARM: SAMSUNG: Remove plat/regs-timer.h header
  ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header
  ARM: SAMSUNG: Remove pwm-clock infrastructure
  ARM: SAMSUNG: Remove old PWM timer platform devices
  pwm: Remove superseded pwm-samsung-legacy driver
  ARM: SAMSUNG: Modify board files to use new PWM platform device
  ARM: SAMSUNG: Rework private data handling in dev-backlight
  pwm: Add new pwm-samsung driver
  pwm: samsung: Rename to pwm-samsung-legacy
  ARM: SAMSUNG: Remove unused PWM timer IRQ chip code
  ARM: SAMSUNG: Remove old samsung-time driver
  ARM: SAMSUNG: Move all platforms to new clocksource driver
  ARM: SAMSUNG: Set PWM platform data
  ARM: SAMSUNG: Add new PWM platform device
  ARM: SAMSUNG: Unify base address definitions of timer block
  clocksource: samsung_pwm_timer: Handle suspend/resume correctly
  clocksource: samsung_pwm_timer: Do not use clocksource_mmio
  clocksource: samsung_pwm_timer: Cache clocksource register address
  clocksource: samsung_pwm_timer: Correct definition of AUTORELOAD bit
  clocksource: samsung_pwm_timer: Do not request PWM mem region
  + v3.11-rc4

Conflicts:
	arch/arm/Kconfig.debug

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-13 23:33:07 -07:00
Soren Brinkmann
3db9e86029 arm: zynq: slcr: Use read-modify-write for register writes
zynq_slcr_cpu_start/stop() ignored the current register state when
writing to a register. Fixing this by implementing proper
read-modify-write.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-07-26 14:14:41 +02:00
Soren Brinkmann
b5f177ff30 arm: zynq: slcr: Clean up #defines
Use a common naming scheme for register offset #defines:
Some of those used a '_OFFSET' suffix to distinguish them from others.
This scheme is used for all register offsets now.

Separate the register offset #defines from others and sort them in
increasing order.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-07-26 14:14:39 +02:00
Soren Brinkmann
c323f2a188 arm: zynq: slcr: Remove redundant header #includes
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-07-26 14:14:38 +02:00
Olof Johansson
47dcd3563e Now that we have a generic arch hook for broadcast we can remove the local
timer API entirely. Doing so will reduce code in ARM core, reduce the
 architecture dependencies of our timer drivers, and simplify the code because
 we no longer go through an architecture layer that is essentially a hotplug
 notifier.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABCAAGBQJRydGwAAoJENidgRMleOc9tMMP/Awy0ETkLHQkXdFdRNLQH7Jd
 BpDagzBkpt/U/qsh2Dy5Yhz7Qf/HQg6CwJK/b1apHguSPzNcSov+YS7ArPV+kuDY
 9OCF5wkVqPW7BPHlxJ+2QAjayIFUaBR+35kpiU+hv9Gkhs11oK90iAWxEIDUGzA6
 5miuOVJeyDEwV8des3NYmVVOKziHLJjX3fjMVnc2gxE6PLmOEUQ9t42bVU1aCfub
 pRMUXNuG+aFk8lRExPfs4wWfEKCOHrgJPSE4OPFp3pDJeqhFi5tXTiPBQ22FpNf5
 78fEDeguS0QS6f/3rGKSdGu/Yz5Lmcldv4tOkfzvNaZP7zhE18wKJu6bSCrZ/Onn
 MnhriYWZh+YgX1V8wTMFMPEV+OR+FJdN4C8PhvNWmMC1Xoq25HtrVQUP5aElgAJs
 mLcgTXxLYpvZH3jPxdtMR9IuDc+86qmFerGShWqp/1YaNHwpR8dNZxFyVNfw+FUL
 /GoAjk/6MsJlZUchiF7I8yp4jYyMcXcV8Bi4tgIAf5rJO9PZBpuxtyAL9uVHnL13
 pwkctMnMQwoP6AE9uYfbdnHCKJxF1hny4tKI5sNxAmK8I6bBkfibIZ3sNRAbSrY7
 56kV+tJrrgvgAUDkgdluyS9eFs26iHGPsHK4lmzJzFylWmvWFa8tWpP6G0kCa0wP
 A1XCqUOryLeL8enPV+z2
 =wZbm
 -----END PGP SIGNATURE-----

Merge tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup

From Stephen Boyd:

Now that we have a generic arch hook for broadcast we can remove the
local timer API entirely. Doing so will reduce code in ARM core, reduce
the architecture dependencies of our timer drivers, and simplify the code
because we no longer go through an architecture layer that is essentially
a hotplug notifier.

* tag 'remove-local-timers' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm:
  ARM: smp: Remove local timer API
  clocksource: time-armada-370-xp: Divorce from local timer API
  clocksource: time-armada-370-xp: Fix sparse warning
  ARM: msm: Divorce msm_timer from local timer API
  ARM: PRIMA2: Divorce timer-marco from local timer API
  ARM: EXYNOS4: Divorce mct from local timer API
  ARM: OMAP2+: Divorce from local timer API
  ARM: smp_twd: Divorce smp_twd from local timer API
  ARM: smp: Remove duplicate dummy timer implementation

Resolved a large number of conflicts due to __cpuinit cleanups, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23 16:54:15 -07:00
Vincent Stehlé
fe08bf9f46 ARM: zynq: fix compilation warning
Fix the following compilation warning:

  arch/arm/mach-zynq/common.c:110:2: warning: initialization from incompatible pointer type [enabled by default]
  arch/arm/mach-zynq/common.c:110:2: warning: (near initialization for ‘__mach_desc_XILINX_EP107.restart’) [enabled by default]

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: trivial@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23 11:04:04 -07:00
Paul Gortmaker
8bd26e3a7e arm: delete __cpuinit/__CPUINIT usage from all ARM users
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
and are flagged as __cpuinit  -- so if we remove the __cpuinit from
the arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
related content into no-ops as early as possible, since that will get
rid of these warnings.  In any case, they are temporary and harmless.

This removes all the ARM uses of the __cpuinit macros from C code,
and all __CPUINIT from assembly code.  It also had two ".previous"
section statements that were paired off against __CPUINIT
(aka .section ".cpuinit.text") that also get removed here.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:52 -04:00
Arnd Bergmann
514a590847 ARM: zynq: use DT_MACHINE_START
The zynq platform code only supports DT based booting, so we
should use DT_MACHINE_START rather than MACHINE_START.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Simek <michal.simek@xilinx.com>
2013-07-05 23:07:39 +02:00
Linus Torvalds
ee1a8d402e ARM SoC device tree changes
These changes from 30 individual branches for the most part update device
 tree files, but there are also a few source code changes that have crept
 in this time, usually in order to atomically move over a driver from
 using hardcoded data to DT probing.
 
 A number of platforms change their DT files to use the C preprocessor,
 which is causing a bit of churn, but that is hopefully only this once.
 
 There are a few conflicts with the other branches unfortunately:
 
 * in exynos5440.dtsi and kirkwood-6281.dtsi, device nodes are added
   from multiple branches. Need to be careful to have the right
   set of closing braces as git gets this one wrong.
 
 * In kirkwood.dtsi, one 'ranges' line got split into two lines, while
   another line got added. Order of the lines does not matter.
 
 * in sama5d3.dtsi, some cleanup was merged the wrong way, causing
   a bogus conflict. We want the 'dmas' and 'dma-names' properties
   to get added here.
 
 * Two lines got removed independently in arch/arm/mach-mxs/mach-mxs.c
 
 * Contents get added independently in arch/arm/mach-omap2/cclock33xx_data.c
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnpGCrR//JCVInAQI50RAAsXbH1SGvjKJemXhRkFloPDYpCbgdDUFr
 ChUbjNV1xsY/jaNCfMa5/Qo7lgz/Ot7BpJef9fZn7ret+dc7nchqe/4iIkAokAUh
 E4ao9D1dP5aAA0ihdbSQHCZtR/0SUR81h6BoOVuo/1mvEiBaFbWAeYe8/6LJd9II
 OU1w9bDmjfZWYFUXs+j2VF76ueZQ+kz69XDKZUGtkqN76m1AL8lGDurj5jxvyllF
 VJns8d9q2nr2q9PferfajK6rkOIPaTpwKblxZHUgobCyOitZaiZM0NgF733TsNM6
 HXmhDhkcn7T81+SiHVfigJ/nxo9UgU4zNJCODF3WZIwGIj3FbxvCOpdCYi2NhCO8
 oLcgDk57tpoKpB3gvAmYVQHP9FIepFa/WAWyPIADA7PkpYrwgc4v+cLEHXpd8SRv
 viLLIa5QuNdMeaK+Md9OKmKZFd7uFD9jiMtmdm6IpEVDDjMgoteb2XSoEtNebmtY
 MfbW4okn118a2dFKKaPTKcXVW/a5FRp2JGfB0A58RQHaJWj3JsY1bFn/xWPEpTOA
 IWB/HHMln0LYTL2AXN9HcaL1jnGI1Wq5eWBurX+cXQ/ij1A6jfoRKYglx7AQqOHj
 iWcGYtKLLJCgiWFnLSwcljZhfoYr0/z7rhns6yo7/vhN0riy+M84OgN4HbAmUzc1
 Bgy9PnJTNo8=
 =8PtJ
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...
2013-07-02 14:23:01 -07:00
Linus Torvalds
3883cbb6c1 ARM SoC specific changes
These changes are all to SoC-specific code, a total of 33 branches on
 17 platforms were pulled into this. Like last time, Renesas sh-mobile
 is now the platform with the most changes, followed by OMAP and EXYNOS.
 
 Two new platforms, TI Keystone and Rockchips RK3xxx are added in
 this branch, both containing almost no platform specific code at all,
 since they are using generic subsystem interfaces for clocks, pinctrl,
 interrupts etc. The device drivers are getting merged through the
 respective subsystem maintainer trees.
 
 One more SoC (u300) is now multiplatform capable and several others
 (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
 towards that goal with this series but need more work.
 
 Also noteworthy is the work on PCI here, which is traditionally part of
 the SoC specific code. With the changes done by Thomas Petazzoni, we can
 now more easily have PCI host controller drivers as loadable modules and
 keep them separate from the platform code in drivers/pci/host. This has
 already led to the discovery that three platforms (exynos, spear and imx)
 are actually using an identical PCIe host controller and will be able
 to share a driver once support for spear and imx is added.
 
 Conflicts:
 * asm/glue-proc.h has one CPU type getting added that conflicts
   with another addition in 3.10-rc7
 * Simple context changes in arch/arm/Makefile and arch/arm/Kconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnpmCrR//JCVInAQLoFRAAyatR+MhVFwc91cO7yDw/mz81RO1V9jEd
 QMufoWi0BRfBsubqxnGlb510EEMTz7gxdrlYPILYNr8TqR+lNGhjKt2FQAjN3q2O
 IBvu4x8C+xcxnMNbkCnTQRxP/ziK6yCI6e7enQhwuMuJwvsnJtGbsqKi5ODMw6x0
 o5EQmIdj5NhhSJqJZPCmWsKbx100TH1UwaEnhNl0DSaFj51n3bVRrK6Nxce10GWZ
 HsS1/a63lq/YZLkwfUEvgin/PU9Jx5jMmqhlp3bZjG+f1ItdzJF+9IgS248vCIi2
 ystzWCH88Kh69UFcYFfCjeZe8H45XcP+Zykd8WC0DvF/a7Hwk5KTKE/ciT6RPRxb
 rkWW5EwjqZL9w9cU3rUHWtSVenayQMMEmCfksadr1AExyCrhPqfs9RINyBs2lK5a
 q2bdSFbXZsNzSyL+3yQAfChvRo1/2FdlFVQy+oVUCActV7L77Y7y6jl+b2qzFsSu
 xMKwvC/1vDXTvOnGk6A/qJu7yrHpqJrvw1eI+wnMswNBl7lCTgyyHnr5y8S092jI
 KU4hmSxsYP+y13HmKy4ewPy9DYJYBTSdReKfEFo79Dx8eqySAWjHFL/OPRqhCUYS
 kBq0eZpVZO7tJnHRaRz8n93wIYzb1UOhhgVwxdjPZF9L4d/jzh1BCv0OBWv8IXCu
 uWLAi92lL24=
 =0r9S
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...
2013-07-02 13:43:38 -07:00
Stephen Boyd
a894fcc2d0 ARM: smp_twd: Divorce smp_twd from local timer API
Separate the smp_twd timers from the local timer API. This will
allow us to remove ARM local timer support in the near future and
gets us closer to moving this driver to drivers/clocksource.

Tested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2013-06-24 17:45:58 -07:00
Soren Brinkmann
7fa5ac3fa2 arm: zynq: Remove board specific compatibility string
It is not necessary to have board specific compatibility strings
in the platform code. The board dts files can use the more generic
'xlnx,zynq-7000' string.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-17 10:32:25 +02:00
Michal Simek
88cd4e882d ARM: zynq: Not to rewrite jump code when starting address is 0x0
This configuration is used by remoteproc.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-17 07:35:31 +02:00
Soren Brinkmann
30e1e28598 arm: zynq: Migrate platform to clock controller
Migrate the Zynq platform and its drivers to use the new clock
controller driver.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
2013-05-27 09:21:22 +02:00
Maxime Ripard
7ac161c435 ARM: zynq: Remove init_irq declaration in machine description
Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is
specified") removed the need to explictly setup the init_irq field in
the machine description when using only irqchip_init. Remove that
declaration for zynq as well.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-21 16:32:16 +02:00
Linus Torvalds
fcba914542 ARM: arm-soc platform updates for 3.10, part 3
This is the third and smallest of the SoC specific updates.
 Changes include:
 
 * SMP support for the Xilinx zynq platform
 * Smaller imx changes
 * LPAE support for mvebu
 * Moving the orion5x, kirkwood, dove and mvebu platforms
   to a common "mbus" driver for their internal devices.
 
 It would be good to get feedback on the location of the "mbus"
 driver. Since this is used on multiple platforms may potentially
 get shared with other architectures (powerpc and arm64), it
 was moved to drivers/bus/. We expect other similar drivers to
 get moved to the same place in order to avoid creating more
 top-level directories under drivers/ or cluttering up the
 messy drivers/misc/ even more.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYgifmCrR//JCVInAQLZ6A//VD38ocUx9RPC8rOgrkzQxcMTh3wFghoA
 BVvS8fcAmhZYA5+GpTYBm+5XH2Jvu6Pv0hrba8TOeEhyZJxiWA6vg0cWWmnvZLDC
 Q0uubhqIhv32I2Oq4uJb/VyzcCrQFrnjhw9HHphy7YlGKKBUFWrbgTaOypwbgXr9
 DnB7u04DvaKcUjZb4Y0HaUDM7qWMFDPbKKF5WMZPqjocnjsiBQ2JMw+2KByliWR3
 mCI+FdickpDYSVp9V9iRM6F73cItknjZIzQs1RYg/GSuPSWkWTdfzE1Blk/561Fo
 QDrNDhnXHlt+bmQRKGWel2gDWBZW47Wj+XkjGpWDFh+e/l3vNJq0hrzXizuRCLSw
 /2VefXyd3jNj8UWL3+GCA4dnw8fx14dgfNJ2iu7kg6l4ggwpJ05ToxabkLFlTRwy
 LloDFjswiTBi75YdQRQCV/95NIxvIQIkbytPrk5zQWVwg8ZXoicgzRRUL5gifLh+
 WE+zaY/A5e1fXN/XS70hvbp2ROZtfGOdunUR9XFR8KNqDoJDlqtrlV3Pjh75YY8G
 JUmCKQjzfubr5WHskPBGCtsSb1455MEIFVANEtlJyOEKp6ytXfpVvrrZtAvmD6Ep
 07dOqOgflnuZPk7H0JOf7mTf9L+fmNp4ubjRqcs9ZfPsEGoQFqBtpLF6JQbxUYGd
 j69lW3jEM3o=
 =rQsu
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates (part 3) from Arnd Bergmann:
 "This is the third and smallest of the SoC specific updates.  Changes
  include:

   - SMP support for the Xilinx zynq platform
   - Smaller imx changes
   - LPAE support for mvebu
   - Moving the orion5x, kirkwood, dove and mvebu platforms to a common
     "mbus" driver for their internal devices.

  It would be good to get feedback on the location of the "mbus" driver.
  Since this is used on multiple platforms may potentially get shared
  with other architectures (powerpc and arm64), it was moved to
  drivers/bus/.  We expect other similar drivers to get moved to the
  same place in order to avoid creating more top-level directories under
  drivers/ or cluttering up the messy drivers/misc/ even more."

* tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  ARM: imx: reset_controller may be disabled
  ARM: mvebu: Align the internal registers virtual base to support LPAE
  ARM: mvebu: Limit the DMA zone when LPAE is selected
  arm: plat-orion: remove addr-map code
  arm: mach-mv78xx0: convert to use the mvebu-mbus driver
  arm: mach-orion5x: convert to use mvebu-mbus driver
  arm: mach-dove: convert to use mvebu-mbus driver
  arm: mach-kirkwood: convert to use mvebu-mbus driver
  arm: mach-mvebu: convert to use mvebu-mbus driver
  ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock
  ARM i.MX53: tve_di clock is not part of the CCM, but of TVE
  ARM i.MX53: make tve_ext_sel propagate rate change to PLL
  ARM i.MX53: Remove unused tve_gate clkdev entry
  ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree
  ARM: i.MX5: Add PATA and SRTC clocks
  ARM: imx: do not bring up unavailable cores
  ARM: imx: add initial imx6dl support
  ARM: imx1: mm: add call to mxc_device_init
  ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS
  ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS
  ...
2013-05-07 11:02:18 -07:00
Linus Torvalds
6fa52ed33b ARM: arm-soc driver changes for 3.10
This is a rather large set of patches for device drivers that for one
 reason or another the subsystem maintainer preferred to get merged
 through the arm-soc tree. There are both new drivers as well as
 existing drivers that are getting converted from platform-specific
 code into standalone drivers using the appropriate subsystem
 specific interfaces.
 
 In particular, we can now have pinctrl, clk, clksource and irqchip
 drivers in one file per driver, without the need to call into
 platform specific interface, or to get called from platform specific
 code, as long as all information about the hardware is provided
 through a device tree.
 
 Most of the drivers we touch this time are for clocksource. Since
 now most of them are part of drivers/clocksource, I expect that we
 won't have to touch these again from arm-soc and can let the
 clocksource maintainers take care of these in the future.
 
 Another larger part of this series is specific to the exynos platform,
 which is seeing some significant effort in upstreaming and
 modernization of its device drivers this time around, which
 unfortunately is also the cause for the churn and a lot of the
 merge conflicts.
 
 There is one new subsystem that gets merged as part of this series:
 the reset controller interface, which is a very simple interface
 for taking devices on the SoC out of reset or back into reset.
 Patches to use this interface on i.MX follow later in this merge
 window, and we are going to have other platforms (at least tegra
 and sirf) get converted in 3.11. This will let us get rid of
 platform specific callbacks in a number of platform independent
 device drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKUsAAoJEIwa5zzehBx3Ug4P/RqEen15hxS/NY8SIVRAU5c0
 G9ZiSPcLmvXGR/t1RZFeLWKaKOYRb2oW1EbXrlkddprkmg85RuQE/KMpCgzPPhVC
 Yrs8UaagMGblaLOjwavVjin/CUXZokRdMfsQoIyMGOezmVGFnv4d4Kt64IOf35DF
 24vDv/QO0BAI9k6m6WLqlWvSshb0IkW8r2LneRLnMEAVop7b1xkOxz0sR6l0LWfV
 6JAMXyTjJMg0t8uCVW/QyNdxcxINHhV4SYcNkzF3EZ7ol50OiJsT9fg0XW759+Wb
 vlX6Xuehg+CBOg+g3ZOZuR8JOEkOhAGRSzuJkk/TmLCCxc+ghnuYz8HArxh6GMHK
 KaxvogLIi0ZsD94A/BZIKkDtOLWlzdz2HBrYo9PTz8zrOz/gXhwQ3zq0jPccC5E0
 S+YYiobCBXepknF9301ti7wGD9VDzI8nmqOKG6tEBrD3xuO+RoBv+z4pBugN4/1C
 DlB19gOz60G5kniziL+wlmWER2qXmYrQZqS+s6+B2XoyoETC0Yij3Rck5vyC6qIK
 A2sni+Y9rzNOB9nzmnISP/UiGUffCy8AV4DZJjMSl0XkF4cpOXqRVGZ2nGB4tR5q
 GTOETcDCo5dvMDKX7Wfrz40CQzO39tnPCddg3OIS93ZwMpCeykIlb1FVL7RcsyF7
 3uikzYHlDo3C5pvtJ5TS
 =ZWk9
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...
2013-05-04 12:31:18 -07:00
Stephen Boyd
4c3ffffdbc ARM: Push selects for TWD/SCU into machine entries
The TWD and SCU configs are selected by default as long as
MSM_SCORPIONMP is false and/or MCT is false. Implementing the
logic this way certainly saves lines in the Kconfig but it
precludes those machines which select MSM_SCORPIONMP or MCT from
participating in the single zImage effort because when those
machines are combined with other SMP capable machines the TWD and
SCU are no longer selected by default.

Push the select out to the machine entries so that we can compile
these machines together and still select the appropriate configs.

Cc: Barry Song <baohua.song@csr.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Simon Horman <horms@verge.net.au>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Viresh Kumar <viresh.linux@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09 21:30:24 +02:00
Arnd Bergmann
797b3a9ee7 Merge branch 'gic/cleanup' into next/soc2
Both zynq and shmobile have conflicts against the gic cleanup
series, resolved here.

Conflicts:
	arch/arm/mach-shmobile/smp-emev2.c
	arch/arm/mach-shmobile/smp-r8a7779.c
	arch/arm/mach-shmobile/smp-sh73a0.c
	arch/arm/mach-zynq/platsmp.c
	drivers/gpio/gpio-pl061.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-08 18:59:19 +02:00
Michal Simek
c7c28b0fdd arm: zynq: Add hotplug support
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04 09:24:00 +02:00
Michal Simek
aa7eb2bb4e arm: zynq: Add smp support
Zynq is dual core Cortex A9 which starts always
at zero. Using simple trampoline ensure long jump
to secondary_startup code.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
2013-04-04 09:24:00 +02:00
Michal Simek
889faa8814 arm: zynq: Get rid of xilinx function prefix
Xilinx is vendor name not SoC name. Use zynq instead.

Also remove one checkpatch warning:
WARNING: static const char * array should probably be
static const char * const
+static const char *xilinx_dt_match[] = {

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04 09:23:58 +02:00
Michal Simek
96790f0a28 arm: zynq: Add support for system reset
Do system reset via slcr registers.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04 09:22:29 +02:00
Michal Simek
64b889b39e arm: zynq: Move slcr initialization to separate file
Create separate slcr driver instead of polluting common code.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04 09:22:29 +02:00
Michal Simek
732078c369 arm: zynq: Load scu baseaddress at run time
Use Cortex a9 cp15 to read scu baseaddress.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04 09:22:28 +02:00
Michal Simek
4f0f234fce arm: zynq: Move timer to generic location
Move zynq timer out of mach folder to generic location
and enable it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04 09:22:09 +02:00
Michal Simek
9e09dc5f7f arm: zynq: Do not use xilinx specific function names
Remove all xilinx specific names from the driver
because this is generic driver for cadence ttc.
xttc->ttc
ttcps->ttc
...

No functional changes in this driver.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04 09:22:02 +02:00
Michal Simek
c5263bb8b7 arm: zynq: Move timer to clocksource interface
Use clocksource timer initialization.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04 09:09:10 +02:00
Michal Simek
e932900a32 arm: zynq: Use standard timer binding
Use cdns,ttc because this driver is Cadence Rev06
Triple Timer Counter and everybody can use it
without xilinx specific function name or probing.

Also use standard dt description for timer
and also prepare for moving to clocksource
initialization.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-04-04 09:09:08 +02:00
Soren Brinkmann
87e4ee759f arm: zynq: timer: Set clock_event cpumask
The timers are common to both A9 cores, so let's set the clock
event struct's cpumask accordingly, to all possible CPUs.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28 13:27:28 +01:00
Soren Brinkmann
03377e5852 arm: zynq: timer: Fix comment style
Fixing multi line comment style at two locations.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28 13:27:27 +01:00
Soren Brinkmann
7a645976ae arm: zynq: timer: Remove redundant #includes
Some #includes are implicitly included through others, some are
just not needed.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28 13:27:25 +01:00
Soren Brinkmann
d16aaf47ee arm: zynq: timer: Align columns
Aligning the columns in a block of #defines, so that the values
are starting in the same colum on every line.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28 13:27:24 +01:00
Soren Brinkmann
ec5b849ed7 arm: zynq: timer: Remove unused #defines
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: John Linn <john.linn@xilinx.com>
Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28 13:27:23 +01:00
Soren Brinkmann
af7f032dba arm: zynq: timer: Remove unnecessary register write
Acknowedging an interrupt requires to read the interrupt register
only. The write was only required to work around a bug in
the QEMU implementation of the TTC, which is fixed.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28 13:27:21 +01:00
Soren Brinkmann
f184c5caa9 arm: zynq: timer: Replace PSS through PS
The acronym PSS is deprecated by Xilinx. The correct term, which is
also used in Xilinx documentation is PS (processing system).
This is just a search and replace:
 - s/PSS/PS/g
 - s/pss/ps/g

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2013-01-28 13:27:20 +01:00
Michal Simek
c067561759 arm: zynq: Add missing irqchip.h to common.c
The patch: "ARM: use common irqchip_init for GIC init"
(sha1: 0529e315bb)
should also add linux/irqchip.h header.

Error message:
arch/arm/mach-zynq/common.c:99:14: error: 'irqchip_init'
  undeclared here (not in a function)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-01-28 13:27:18 +01:00
Olof Johansson
f8060f5446 Initial irqchip init infrastructure and GIC and VIC clean-ups
This creates irqchip initialization infrastructure from Thomas
 Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips
 and adapted to use the new infrastructure. All DT enabled platforms
 using GIC and VIC are converted over to use the new irqchip_init.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJQ8ZobAAoJEMhvYp4jgsXiihIH/2VvxmSHZb0e3jN6AR0B42b7
 9EwX0IE0B23t91hNTwdzzmTJQYA7pMmWkgHNfd3vIeqSepJAmrVv/gp4iM9CtPwE
 KNh+kDWOK2ZsOH4Vb0lYRJHN8WQOIQHuCUr9+MdYLNOgf/pPL6G/Y9kv9A1e7fTC
 W+tFRjC5N1ilZMGyowX12L1wnwDk6kHzed6YV6bskC17cZ9/pg8PhSVbM4A/3kAv
 NXYKqbXJb+eCsWGXg/knZXOL6V9gBwvVYoe4O9X3nQ0226AWB9caad8l8tchAjRB
 fmrYF1tbkpOWPnLxhvQy5b5MJichJgTMJHh7RgiEcc/3f63kOljjlx4QKiqHvT0=
 =q7gm
 -----END PGP SIGNATURE-----

Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux into next/cleanup

From Rob Herring:

Initial irqchip init infrastructure and GIC and VIC clean-ups

This creates irqchip initialization infrastructure from Thomas
Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips
and adapted to use the new infrastructure. All DT enabled platforms
using GIC and VIC are converted over to use the new irqchip_init.

* tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux:
  irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h
  ARM: picoxcell: use common irqchip_init function
  ARM: spear: use common irqchip_init function
  irqchip: Move ARM VIC to drivers/irqchip
  ARM: samsung: remove unused tick.h
  ARM: remove unneeded vic.h includes
  ARM: remove mach .handle_irq for VIC users
  ARM: VIC: set handle_arch_irq in VIC initialization
  ARM: VIC: shrink down vic.h
  irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h
  ARM: use common irqchip_init for GIC init
  irqchip: Move ARM GIC to drivers/irqchip
  ARM: remove mach .handle_irq for GIC users
  ARM: GIC: set handle_arch_irq in GIC initialization
  ARM: GIC: remove direct use of gic_raise_softirq
  ARM: GIC: remove assembly ifdefs from gic.h
  ARM: mach-ux500: use SGI0 to wake up the other core
  arm: add set_handle_irq() to register the parent IRQ controller handler function
  irqchip: add basic infrastructure
  irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS

Fixed up massive merge conflicts with the timer cleanup due to adjacent changes:

Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-bcm/board_bcm.c
	arch/arm/mach-cns3xxx/cns3420vb.c
	arch/arm/mach-ep93xx/adssphere.c
	arch/arm/mach-ep93xx/edb93xx.c
	arch/arm/mach-ep93xx/gesbc9312.c
	arch/arm/mach-ep93xx/micro9.c
	arch/arm/mach-ep93xx/simone.c
	arch/arm/mach-ep93xx/snappercl15.c
	arch/arm/mach-ep93xx/ts72xx.c
	arch/arm/mach-ep93xx/vision_ep9307.c
	arch/arm/mach-highbank/highbank.c
	arch/arm/mach-imx/mach-imx6q.c
	arch/arm/mach-msm/board-dt-8960.c
	arch/arm/mach-netx/nxdb500.c
	arch/arm/mach-netx/nxdkn.c
	arch/arm/mach-netx/nxeb500hmi.c
	arch/arm/mach-nomadik/board-nhk8815.c
	arch/arm/mach-picoxcell/common.c
	arch/arm/mach-realview/realview_eb.c
	arch/arm/mach-realview/realview_pb1176.c
	arch/arm/mach-realview/realview_pb11mp.c
	arch/arm/mach-realview/realview_pba8.c
	arch/arm/mach-realview/realview_pbx.c
	arch/arm/mach-socfpga/socfpga.c
	arch/arm/mach-spear13xx/spear1310.c
	arch/arm/mach-spear13xx/spear1340.c
	arch/arm/mach-spear13xx/spear13xx.c
	arch/arm/mach-spear3xx/spear300.c
	arch/arm/mach-spear3xx/spear310.c
	arch/arm/mach-spear3xx/spear320.c
	arch/arm/mach-spear3xx/spear3xx.c
	arch/arm/mach-spear6xx/spear6xx.c
	arch/arm/mach-tegra/board-dt-tegra20.c
	arch/arm/mach-tegra/board-dt-tegra30.c
	arch/arm/mach-u300/core.c
	arch/arm/mach-ux500/board-mop500.c
	arch/arm/mach-ux500/cpu-db8500.c
	arch/arm/mach-versatile/versatile_ab.c
	arch/arm/mach-versatile/versatile_dt.c
	arch/arm/mach-versatile/versatile_pb.c
	arch/arm/mach-vexpress/v2m.c
	include/asm-generic/vmlinux.lds.h
2013-01-14 19:55:03 -08:00
Rob Herring
0529e315bb ARM: use common irqchip_init for GIC init
Convert all GIC DT initialization over to use common irqchip_init
function.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
2013-01-12 10:47:32 -06:00
Rob Herring
1d5cc604f4 ARM: remove mach .handle_irq for GIC users
Now that the GIC initialization sets up the handle_arch_irq pointer, we
can remove it for all machines and make it static.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Anton Vorontsov <avorontsov@mvista.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-12 10:47:20 -06:00
Stephen Warren
6bb27d7349 ARM: delete struct sys_timer
Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.

This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.html

Includes mach-omap2 fixes from Igor Grinberg.

Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-24 09:36:38 -07:00
Michal Simek
acda38aab6 ARM: zynq: Remove all unused mach headers
Remove empty unused mach/hardware.h.
mach/irqs.h is unused because SPARSE_IRQ are ON by default.
mach/timex.h is unused because of CONFIG_ARCH_MULTIPLATFORM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Josh Cartwright <josh.cartwright@ni.com>
2012-11-21 10:52:21 +01:00
Josh Cartwright
9a45eb691d ARM: zynq: add support for ARCH_MULTIPLATFORM
The majority of changes are necessary to remove dependencies on header
files within arch/arm/mach-zynq/include/mach:

  uncompress.h
    - Deleted. It is unused for ARCH_MULTIPLATFORM builds.

  uart.h:
    - Move uart definitions out of uart.h into debug/zynq.S, which is
      now the only user

  zynq_soc.h:
    - Move SCU address definitions into common.c.
    - Other #defines, such as PERIPHERAL_CLOCK_RATE, TTC0_BASE, etc, are
      unused and can be dropped

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-21 10:52:13 +01:00
Josh Cartwright
385f02b169 ARM: zynq: make use of debug_ll_io_init()
Convert low-level debugging routines to make use of debug_ll_io_init().
This is part of the preparation for ARCH_MULTIPLATFORM support for Zynq.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-21 10:52:05 +01:00
Josh Cartwright
667f2988e2 ARM: zynq: remove TTC early mapping
Now that the TTC driver has proper support for DT bindings, it is not
necessary for the registers to be mapped early.  They will be mapped
during clock initialization using of_iomap().  Remove the early mapping.

In addition, remove the extraneous zynq_soc.h include from the timer
driver.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-21 10:51:57 +01:00
Josh Cartwright
91dc985c5e ARM: zynq: add clk binding support to the ttc
Add support for retrieving TTC configuration from device tree.  This
includes the ability to pull information about the driving clocks from
the of_clk bindings.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-14 16:10:42 +01:00
Josh Cartwright
0f586fbf6f ARM: zynq: use zynq clk bindings
Make the Zynq platform use the newly created zynq clk bindings.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-14 16:10:32 +01:00
Josh Cartwright
e06f1a9ed7 ARM: zynq: dts: split up device tree
The purpose of the created zynq-7000.dtsi file is to describe the
hardware common to all Zynq 7000-based boards.  Also, get rid of the
zynq-ep107 device tree, since it is not hardware anyone can purchase.

Add a zc702 dts file based on the zynq-7000.dtsi.  Add it to the
dts/Makefile so it is built with the 'dtbs' target.

Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-12 13:24:48 +01:00