Commit Graph

71 Commits

Author SHA1 Message Date
Vasily Averin
dce200670d [SCSI] aic7xxx: reset handler selects a wrong command
To transport scsi reset command to device aic7xxx reset handler looks
at the driver's pending_list and searches any proper command. However
the search condition has been inverted: ahc_match_scb() returns TRUE
if a matched command is found. As a result the reset on required
devices did not turn out well, a correctly working neighbour device
may be surprised by the reset. aic7xxx reset handler reports about the
success, but really the original situation is not corrected yet.

Signed-off-by: Vasily Averin <vvs@sw.ru>

Naturally, there's a corresponding problem in the aic79xx driver, so
I've also added the same fix for that.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-28 12:28:26 -06:00
James Bottomley
8a87a0b631 Merge by hand (whitespace conflicts in libata.h)
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-10 08:29:07 -06:00
Olaf Hering
733482e445 [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reason
This patch removes almost all inclusions of linux/version.h.  The 3
#defines are unused in most of the touched files.

A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is
unfortunatly in linux/version.h.

There are also lots of #ifdef for long obsolete kernels, this was not
touched.  In a few places, the linux/version.h include was move to where
the LINUX_VERSION_CODE was used.

quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'`

search pattern:
/UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:57 -08:00
Christoph Hellwig
4065a413d7 [SCSI] aic79xx: remove scsi_assign_lock usage
just take the internal lock in queuecommand instead.  also switch
the only direct use of the internal lock to the wrappers used elsewhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 12:52:08 -06:00
Christoph Hellwig
6d5e9fd196 [SCSI] aic7xxx: remove scsi_assign_lock usage
just take the internal lock in queuecommand instead.  also switch
the only direct use of the internal lock to the wrappers used elsewhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 12:51:58 -06:00
Jeff Garzik
422c0d61d5 [SCSI] use scmd_id(), scmd_channel() throughout code
Wrap a highly common idiom.  Makes the code easier to read, helps pave
the way for sdev->{id,channel} removal, and adds a token that can easily
by grepped-for in the future.

There are a couple sdev_id() and scmd_printk() updates thrown in as well.

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 21:10:16 -05:00
Jeff Garzik
017560fca4 [SCSI] use sfoo_printk() in drivers
Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 21:04:15 -05:00
James Bottomley
97af50f60f [SCSI] aic7xxx/aic79xx: fix module removal path not to panic
In these drivers, scsi_remove_host() is called too late, at the point
it is called, the driver has already shut down too far to accept any
I/O that the shutdown might generate.  Any generated I/O actually
triggers a panic.

Fix this by calling scsi_remove_host() as early as possible and not
calling scsi_host_put() until just before we kfree the ahc_softc.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-02 15:32:25 -05:00
James Bottomley
a89f29f6ea [SCSI] aic7xxx: move to dma_get_required_mask() and correct 39 bit assumptions
This patch moves aic7xxx over to the dma_get_required_mask() API and
dumps its open coded memory check.

It also appears from this bug:

https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=167049

That 39 bit addressing doesn't work on older cards.  I surmise that the
AHC_LARGE_SCBS flag is the one that marks cards capable of using 39 bit
addressing, so I also folded that check into the code.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-13 14:24:48 -05:00
James Bottomley
17fa53da12 Merge by hand (conflicts in sd.c) 2005-09-06 17:52:54 -05:00
Christoph Hellwig
1ff927306e [SCSI] aic7xxx: remove aiclib.c
#include of C files and macro tricks to rename symbols are evil and just
cause trouble.  Let's doublicate the two functions as they're going to
go away soon enough anyway.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:46:07 -05:00
James Bottomley
7a93aef7fb Merge HEAD from ../scsi-misc-2.6-tmp 2005-08-28 11:18:35 -05:00
Christoph Hellwig
975f24bdc7 [SCSI] aiclib remove dead
remove lots of completely dead code from aiclib, there's not a lot left
and even what's left is rather useless.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-15 09:19:23 -05:00
Christoph Hellwig
85a46523ff [SCSI] aic79xx: sane pci probing
remove ahd_tailq and do sane pci probing.  ported over from aic7xxx.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-15 09:18:55 -05:00
Christoph Hellwig
d46b1d549e [SCSI] aic79xx: remove some dead code
remove some dead cruft, as done already in aic7xxx

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-15 09:18:12 -05:00
James Bottomley
3a4f5c60db [SCSI] aic7xxx: lost multifunction flags handling
From: Christoph Hellwig <hch@lst.de>

Multi-function cards need to inherit the PCI flags from the master PCI
device.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-13 09:42:45 -05:00
akpm@osdl.org
0336ee5aed [SCSI] fix warning in aic7770.c
From: "Martin J. Bligh" <mbligh@mbligh.org>

drivers/scsi/aic7xxx/aic7770.c: In function `aic7770_config':
drivers/scsi/aic7xxx/aic7770.c:129: warning: unused variable `l'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12 12:28:10 -05:00
James Bottomley
a80b3424d9 [SCSI] aic79xx: fix boot panic with no hardware
There's a spurious (and illegal since it's marked __exit) call to
ahc_linux_exit() in ahc_linux_init() which causes a double list
deletion of the transport class; remove it.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-09 12:19:25 -05:00
akpm@osdl.org
a2ae85df80 [SCSI] aic79xx: needs to select SPI_TRANSPORT_ATTRS
without it you get this failure:

drivers/built-in.o(.text+0xdcccd): In function `ahd_linux_slave_configure':
drivers/scsi/aic7xxx/aic79xx_osm.c:636: undefined reference to `spi_dv_device'
drivers/built-in.o(.text+0xdd7b1): In function `ahd_send_async':
drivers/scsi/aic7xxx/aic79xx_osm.c:1652: undefined reference to `spi_display_xfer_agreement'
drivers/built-in.o(.init.text+0x7b4d): In function `ahd_linux_init':
drivers/scsi/aic7xxx/aic79xx_osm.c:2765: undefined reference to `spi_attach_transport'
drivers/built-in.o(.init.text+0x7c94):drivers/scsi/aic7xxx/aic79xx_osm.c:2774: undefined reference to `spi_release_transport'
drivers/built-in.o(.exit.text+0x72c): In function `ahd_linux_exit':
drivers/scsi/aic7xxx/aic79xx_osm.c:2783: undefined reference to `spi_release_transport'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-07 09:34:29 -05:00
James Bottomley
fc789a9399 [SCSI] aic7xxx/79xx: fix another potential panic due to a non existent target
I ran into this one sending bus resets across the hardware.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-05 16:49:15 -05:00
James Bottomley
79778a27be [SCSI] aic7xxx: upport all sequencer and core fixes from adaptec version 6.3.9
This patch upports all relevant code fixes and bumps the driver version
to 7.0 to signify starting a new tree.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-04 17:41:25 -05:00
Hannes Reinecke
52b5cfb355 [SCSI] aic79xx: fixup DT setting
this patch is just a cross-port of the fixup for aic7xxx DT settings.
As the same restrictions apply for aic79xx also (DT requires wide
transfers) the dt setting routine should be modified equivalently.
And an invalid period setting will be caught by ahd_find_syncrate()
anyway.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-04 17:39:55 -05:00
Linus Torvalds
6fb0caa423 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 2005-08-04 13:08:29 -07:00
James Bottomley
fdd0edf2ac [SCSI] fix aic7xxx performance issues since 2.6.12-rc2
Several people noticed we dropped quite a bit on benchmark figures.
OK, it was my fault but unfortunately I discovered I ran out of brown
paper bags a while ago and forgot to reorder them.

The issue is that a construct introduced in the conversion of the
driver to use the transport class keyed off whether the block request
was tagged or not.  However, the aic7xxx driver doesn't properly set
up the block layer TCQ (it uses the wrong API), so the driver now
things all requests are untagged and we keep it to a queue depth of a
single element.  Oops.

The fix is to use the correct TCQ API.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-04 13:38:59 -05:00
James Bottomley
88ff29a4a5 [SCSI] aic79xx: add hold_mcs to the transport parameters
since this card can support the setting, add it to the parameter list.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03 16:22:20 -05:00
James Bottomley
3f40d7d6ea [SCSI] aic79xx: fix up transport settings
There's a slight problem in the way you've done the transport
parameters; reading from the variables actually produces the current
settings, not the ones you just set (and there's usually a lag because
devices don't renegotiate until the next command goes over the bus).  If
you set the bit immediately, you get into the situation where the
transport parameters report something as being set even if the drive
cannot support it.

I patched the driver to do it this way and also corrected a panic in the
proc routines.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03 13:36:52 -05:00
Hannes Reinecke
a4b53a1180 [SCSI] aic79xx: DV parameter settings
This patch updates various scsi_transport_spi parameters with the actual
parameters used by the driver internally.
Domain Validation for all devices should now work properly.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03 11:48:03 -05:00
Hannes Reinecke
73a2546210 [SCSI] aic79xx: update to use scsi_transport_spi
This patch updates the aic79xx driver to take advantage of the
scsi_transport_spi infrastructure. Patch is quite a mess as some
procedures have been reshuffled to be closer to the aic7xxx driver.

Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03 11:45:14 -05:00
Hannes Reinecke
60a1321384 [SCSI] aic79xx: Remove busyq
From: Jeff Garzik <jgarzik@pobox.com>

This patch removes the busyq in aic79xx and uses the command-queue from 
the midlayer instead. Additionally some dead code is removed.

Signed-off-by: Hannes Reinecke <hare@suse.de>

Fixed rejections

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03 11:25:36 -05:00
James Bottomley
84e66ee7ec [SCSI] aic7xxx: final fixes for DT handling
The aic7xxx can support Data Group transfers at periods > 12.5, so
eliminate that restriction.  Additionally wide is a requirement for DT
so ensure wide is set if users request DT.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-02 10:50:51 -05:00
Olaf Hering
f7c80c9f77 [PATCH] aic byteorder fixes after recent cleanup
Rebuild the aic7xxx firmware doesn't work anymore after this change
which appeared int 2.6.13-rc1:

   [SCSI] aic7xxx/aic79xx: remove useless byte order macro cruft

Two files did not include byteorder.h, resulting in aic dying with a panic

	"Unknown opcode encountered in seq program"

This fixes it for me.

Signed-off-by: Olaf Hering <olh@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-02 08:43:59 -07:00
James Bottomley
f7ff898ad3 [SCSI] aic7xxx: fix bug in DT handing
Basically DT isn't reported or handled at all.  The problem is that
lines of code like this:

spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ;

don't do what you think they do when spi_dt is a single bit variable.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30 10:44:38 -05:00
Olaf Hering
0a637a2cec [SCSI] aic byteorder fixes after recent cleanup
aic doesnt work anymore after this change which appeared int 2.6.13-rc1:
 [SCSI] aic7xxx/aic79xx: remove useless byte order macro cruft

 2 files did not include byteorder.h, aic died with panic
 "Unknown opcode encountered in seq program"
 This patch fixes it for me.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30 09:08:20 -05:00
Olaf Hering
44456d37b5 [PATCH] turn many #if $undefined_string into #ifdef $undefined_string
turn many #if $undefined_string into #ifdef $undefined_string to fix some
warnings after -Wno-def was added to global CFLAGS

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:08 -07:00
Christoph Hellwig
2a40342e0e [SCSI] aic7xxx: remove ahc_tailq
now that we do normal PCI probing there's no need to keep a list of
all HBAs.

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11 12:47:47 -05:00
Christoph Hellwig
dfd287f6ee [SCSI] aic7xxx: sane pci probing
always probe in bus order, avoid any reordering

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11 12:43:09 -05:00
Andrew Morton
cc33895abb [SCSI] aic79xx: ahd_linux_dev_reset() cleanup
Use the macros consistently in ahd_linux_dev_reset().

If ahd_linux_dev_reset() really can be called with local interrupts disabled
then yuk.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11 09:35:39 -05:00
James Bottomley
ace4e7185d [SCSI] aic7xxx: fix boot hang with Fujitsu drives
Apparently these are the only drives that try to negotiate IU and QAS
at u160 speeds.  The aic7xxx driver can't cope with this.  The fix is
to eliminate the IU and QAS setting routines.  I've #if 0'd them out,
just in case we ever get the sequencer documentation out of Adaptec,
since we'd then be able to fix the driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-03 10:44:21 -05:00
James Bottomley
c0df28cfe0 [SCSI] aic7xxx: correct target valid check in aic7xxx_proc.c
From: 	Andy Whitcroft <apw@shadowen.org>

Updated to remove the bogus translated target check.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26 12:22:30 -05:00
Jeff Garzik
e632ba11b8 aic7xxx/aic79xx_osm: revert completely bogus ahd_linux_queue() patch 2005-06-19 21:50:12 -04:00
James Bottomley
3237ee78fc merge by hand (fix up qla_os.c merge error) 2005-06-17 18:42:23 -05:00
Jeff Garzik
68b3aa7c98 [SCSI] allow sleeping in ->eh_bus_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:10 -05:00
Jeff Garzik
94d0e7b805 [SCSI] allow sleeping in ->eh_device_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:03 -05:00
Jeff Garzik
8fa728a268 [SCSI] allow sleeping in ->eh_abort_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:04:55 -05:00
James Bottomley
12021fff2b [SCSI] aic7xxx: fix the BIOS limits setting routines
Following the go around over the SONY DVD that needs artificial limits,
this should be the correct code for all cases (minus the debugging
prints).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-13 21:37:27 -05:00
Christoph Hellwig
d6cbbad729 [SCSI] aic7xxx: clean up eisa support
- the eisa layer only probes when it's actually safe, no need for
   a driver option
 - store the id table directly in linux format instead of convering
   at runtime

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11 18:45:06 -05:00
Christoph Hellwig
8eb3794257 [SCSI] aic7xxx: remove some dead wood
especially the now dead scsi_cmnd overlay

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11 18:44:12 -05:00
Christoph Hellwig
3d65692aed [SCSI] aic7xxx: remove ahc_find_softc
there's absolutely no reason not to trust the driver private data

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11 18:43:48 -05:00
Christoph Hellwig
e431223eca [SCSI] aic7xxx: do not check for duplicate pci ids
pci layer handles this just fine for us

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11 18:38:41 -05:00
Christoph Hellwig
765c4d45b8 [SCSI] aic7xxx/aic79xx: remove useless byte order macro cruft
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11 18:38:21 -05:00