Commit Graph

21 Commits

Author SHA1 Message Date
Alex Chiang
268a03a42d PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS
There is no way to interact with a physical PCI slot without
sysfs, so encode the dependency and prevent this build error:

	drivers/pci/slot.c: In function 'pci_hp_create_module_link':
	drivers/pci/slot.c:327: error: 'module_kset' undeclared

This patch _should_ make pci-sysfs.o depend on CONFIG_SYSFS too,
but we cannot (yet) because the PCI core merrily assumes the
existence of sysfs:

	drivers/built-in.o: In function `pci_bus_add_device':
	drivers/pci/bus.c:89: undefined reference to `pci_create_sysfs_dev_files'
	drivers/built-in.o: In function `pci_stop_dev':
	drivers/pci/remove.c:24: undefined reference to `pci_remove_sysfs_dev_files'

So do the minimal bit for now and figure out how to untangle it
later.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fix-suggested-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-18 13:57:24 -07:00
Alex Chiang
12a9da0fcb PCI Hotplug: cpqphp: don't use pci_find_slot()
Convert uses of pci_find_slot to modern API.

In the conversion sites, we end up calling pci_dev_put() right away.

This may seem like it misses the entire point of doing something like
pci_get_bus_and_slot(), since we drop the reference so soon, but it turns
out we don't actually do much with the returned pci_dev.

I plan on untangling cpqphp further, but clearly cpqphp never worried too
much about a properly refcounted pci_dev anyway. For now, this conversion
seems reasonable, as it gets rid of the last in-tree caller of pci_find_slot.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:16 -07:00
Michael Ellerman
3f3b902ed8 powerpc/pseries: The RPA PCI hotplug driver depends on EEH
The RPA PCI hotplug driver calls EEH routines, so should depend on
EEH. Also PPC_PSERIES implies PPC64, so remove that.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2009-03-12 15:10:02 -04:00
Greg Kroah-Hartman
3b57eff02c PCI Hotplug: the ibm driver is not dependant on PCI_LEGACY
This was marked incorrectly for some reason.  Allow the ibmphp driver to
be built even if PCI_LEGACY is not enabled.

Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:46:57 -07:00
Greg Kroah-Hartman
33ae6ef26d PCI Hotplug: make cpcihp driver use modern apis
This removes the depandancy of the cpcihp driver from the PCI_LEGACY
config option by removing its usage of the pci_find_bus() function.


Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:46:56 -07:00
Kristen Carlson Accardi
1ec87280eb PCI: hotplug: remove Experimental
Remove EXPERIMENTAL from PCI Hot Plug.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:19 -08:00
Jeff Garzik
bd3989e006 PCI: Add Kconfig option to disable deprecated pci_find_* API
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:17 -08:00
Jan Engelhardt
d4770143fe PCI hotplug: Use menuconfig objects
Use menuconfigs instead of menus, so the whole menu can be disabled at
once instead of going through all options.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Cc: Scott Murray <scottm@somanetworks.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:42 -07:00
Kenji Kaneshige
3d9c18872f shpchp: remove CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE
The CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE config option is not
needed because polling mechanism for shpc hotplug events can be
enabled through module option 'shpchp_poll_mode'. This patch removes
CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 15:50:05 -08:00
Don Mullis
bf4735a46a [PATCH] Kconfig refactoring for better menu nesting
Refactor Kconfig content to maximize nesting of menus by menuconfig and
xconfig.

Tested by simultaneously running `make xconfig` with and without
patch, and comparing displays.

Signed-off-by: Don Mullis <dwm@meer.net>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:55:39 -08:00
Matt LaPlante
cab00891c5 Still more typo fixes
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:36:44 +02:00
Len Brown
da547d775f Merge trivial low-risk suspend hotkey bugzilla-5918 into release 2006-08-20 21:49:29 -04:00
Kristen Carlson Accardi
b5240b32b9 ACPIPHP: allow acpiphp to build without ACPI_DOCK
Change the build options for acpiphp so that it may build without being
dependent on the ACPI_DOCK option, but yet does not allow the option of
acpiphp being built-in when dock is built as a module.
This does not change the previous patch for ACPI_IBM_DOCK Kconfig.

For the following matrix of config options, I built an i386 kernel.

Dock		acpiphp		should it build?	confirmed
y		y		y			y
y		n		y			y
y		m		y			y
m		y		no - acpiphp should	acpiphp was 
				     convert to m	converted to m
m		n		y			y
m		m		y			y
n		y		y			y
n		n		y			y
n		m		y			y


Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-08-16 01:00:07 -04:00
Dave Jones
f0c1dc0730 PCI: remove dead HOTPLUG_PCI_SHPC_PHPRM_LEGACY option.
Nothing in the tree references this config option.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-11 14:06:05 -07:00
Linus Torvalds
c80dc60b03 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: ACPI_DOCK: Initialize the atomic notifier list
  ACPI: acpi_os_allocate() fixes
  ACPI: SBS: fix initialization, sem2mutex
  ACPI: add 'const' to several ACPI file_operations
  ACPI: delete some defaults from ACPI Kconfig
  ACPI: "Device `[%s]' is not power manageable" make message debug only
  ACPI: ACPI_DOCK Kconfig
  Revert "Revert "ACPI: dock driver""
  ACPI: acpi_os_get_thread_id() returns current
  ACPI: ACPICA 20060707
2006-07-10 15:14:38 -07:00
Andrew Morton
135c294fa3 [PATCH] don't select CONFIG_HOTPLUG
It's useful to be able to turn off CONFIG_HOTPLUG for compile-coverage testing
and for section-checking coverage.  But a few things go and select
CONFIG_HOTPLUG, making it a royal PITA to turn the thing off.

It's only turnable offable if CONFIG_EMBEDDED anyway.  So let's make those
things depend on HOTPLUG, not select it.

Cc: Greg KH <greg@kroah.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:12 -07:00
Len Brown
8d7bff6c08 ACPI: ACPI_DOCK Kconfig
HOTPLUG_PCI_ACPI depends on ACPI_DOCK
ACPI_IBM_DOCK depends on ACPI_DOCK=n
ACPI_DOCK is EXPERIMENTAL, though that doesn't seem to mean much

Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-09 22:09:57 -04:00
Pavel Machek
654143ee3a [PATCH] PCI Hotplug: fix up Kconfig help text
Remove reference to pcihpfs that no longer exists.

Signed-off-by: Pavel Machek <pavel@suse.cz>
2006-01-31 18:00:11 -08:00
Len Brown
76f5858482 [ACPI] delete CONFIG_ACPI_BUS
it is a synonym for CONFIG_ACPI

Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-24 12:11:34 -04:00
Prarit Bhargava
6f354b014b [IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver code
This patch is the SGI hotplug driver and additional changes required for
the driver.  These modifications include changes to the SN io_init.c code
for memory management, the inclusion of new SAL calls to enable and disable
PCI slots, and a hotplug-style driver.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06 15:29:53 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00