Commit Graph

172 Commits

Author SHA1 Message Date
Michael Chan
bbe4297421 [BNX2]: Update version to 1.6.9.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 02:45:31 -08:00
Michael Chan
c09c262783 [BNX2]: Fix RX packet rot.
Packets can be left in the RX ring if the NAPI budget is reached.
This is caused by storing the latest rx index at the beginning of
bnx2_rx_int().  We may not process all the work up to this index
if the budget is reached and so some packets in the RX ring may rot
when we later check for more work using this stored rx index.

The fix is to not store this latest hw index and only store the
processed rx index.  We use a new function bnx2_get_hw_rx_cons()
to fetch the latest hw rx index.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 02:45:30 -08:00
Michael Chan
fb0c18bd1f [BNX2]: Add PHY_DIS_EARLY_DAC workaround.
5709 Ax and Bx chips all need this workaround.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-11 02:45:29 -08:00
Jiri Slaby
1977f03272 remove asm/bitops.h includes
remove asm/bitops.h includes

including asm/bitops directly may cause compile errors. don't include it
and include linux/bitops instead. next patch will deny including asm header
directly.

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:41 -07:00
Linus Torvalds
a57793651f Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (51 commits)
  [IPV6]: Fix again the fl6_sock_lookup() fixed locking
  [NETFILTER]: nf_conntrack_tcp: fix connection reopening fix
  [IPV6]: Fix race in ipv6_flowlabel_opt() when inserting two labels
  [IPV6]: Lost locking in fl6_sock_lookup
  [IPV6]: Lost locking when inserting a flowlabel in ipv6_fl_list
  [NETFILTER]: xt_sctp: fix mistake to pass a pointer where array is required
  [NET]: Fix OOPS due to missing check in dev_parse_header().
  [TCP]: Remove lost_retrans zero seqno special cases
  [NET]: fix carrier-on bug?
  [NET]: Fix uninitialised variable in ip_frag_reasm()
  [IPSEC]: Rename mode to outer_mode and add inner_mode
  [IPSEC]: Disallow combinations of RO and AH/ESP/IPCOMP
  [IPSEC]: Use the top IPv4 route's peer instead of the bottom
  [IPSEC]: Store afinfo pointer in xfrm_mode
  [IPSEC]: Add missing BEET checks
  [IPSEC]: Move type and mode map into xfrm_state.c
  [IPSEC]: Fix length check in xfrm_parse_spi
  [IPSEC]: Move ip_summed zapping out of xfrm6_rcv_spi
  [IPSEC]: Get nexthdr from caller in xfrm6_rcv_spi
  [IPSEC]: Move tunnel parsing for IPv4 out of xfrm4_input
  ...
2007-10-18 14:40:30 -07:00
Joe Perches
898eb71cb1 Add missing newlines to some uses of dev_<level> messages
Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:28 -07:00
Michael Chan
0c2bef4976 [BNX2]: Update version to 1.6.8.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17 19:26:28 -07:00
Michael Chan
239cd34327 [BNX2]: Fix Serdes WoL bug.
The bug is in the code in bnx2_set_power_state() that assumes copper
devices when setting up WoL.  This is no longer true after adding WoL
support for Serdes devices.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-17 19:26:15 -07:00
Michael Chan
6dee642158 [BNX2]: Refine napi poll loop.
Need to read and store sblk->status_idx before checking for more work.
The status idx is later written back to the hardware when enabling
interrupts to acknowledge how much work has been processed.  If the
order is reversed, we can end up acknowledging work we haven't
processed.

When completing bnx2_poll(), we should always break out of the while
loop and return work_done instead of returning 0.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-12 02:01:21 -07:00
David S. Miller
6f53576316 [NET]: Fix NAPI completion handling in some drivers.
In order for the list handling in net_rx_action() to be
correct, drivers must follow certain rules as stated by
this comment in net_rx_action():

		/* Drivers must not modify the NAPI state if they
		 * consume the entire weight.  In such cases this code
		 * still "owns" the NAPI instance and therefore can
		 * move the instance around on the list at-will.
		 */

A few drivers do not do this because they mix the budget checks
with reading hardware state, resulting in crashes like the one
reported by takano@axe-inc.co.jp.

BNX2 and TG3 are taken care of here, SKY2 fix is from Stephen
Hemminger.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11 18:08:29 -07:00
Michael Chan
32d1316b91 [BNX2]: Update version to 1.6.7.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:58 -07:00
Michael Chan
846f5c622f [BNX2]: Fix default WoL setting.
Change the default WoL setting to match the NVRAM's setting.  It
always defaulted to WoL disabled before and caused a lot of confusion
for users.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:57 -07:00
Michael Chan
489310a440 [BNX2]: Fix remote PHY media detection problems.
The remote PHY media type and link status can change between
->probe() and ->open().  For correct operation, we need to get the
new status again during ->open().

The ethtool link test and loopback test are also fixed to work with
remote PHY.  PHY loopback is simply skipped when remote PHY is
present.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:57 -07:00
Michael Chan
f74347d7ac [BNX2]: Update version to 1.6.6.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:08 -07:00
Michael Chan
ea1f8d5c3a [BNX2]: Optimize firmware loading.
This is a follow up to the patches from Denys Vlasenkos
<vda.linux@googlemail.com> to further optimize firmware loading.

1. In bnx2_init_cpus(), we allocate memory for decompression once
and use it repeatedly instead of doing this for every firmware image.

2. We eliminate the BSS and SBSS firmware sections in bnx2_fw*.h since
these are always zeros.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:54:07 -07:00
Denys Vlasenko
8336793baf [ZLIB]: Move bnx2 driver gzip unpacker into zlib.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:53:57 -07:00
Denys Vlasenko
b3448b0bde [BNX2]: factor out gzip unpacker
This patch modifies gzip unpacking code in bnx2 driver so that
it does not depend on bnx2 internals. I will move this code
out of the driver and into zlib in follow-on patch.

It can be useful in other drivers which need to store firmwares
or any other relatively big binary blobs - fonts, cursor bitmaps,
whatever.

Patch is run tested by Michael Chan (driver author).

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:53:57 -07:00
Jeff Garzik
b9f2c0440d [netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_count
These have been superceded by the new ->get_sset_count() hook.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:45 -07:00
Joe Perches
0795af5729 [NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()
This is nicer than the MAC_FMT stuff.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:42 -07:00
Jeff Garzik
88d3aafdae [ETHTOOL] Provide default behaviors for a few ethtool sub-ioctls
For the operations
	get-tx-csum
	get-sg
	get-tso
	get-ufo
the default ethtool_op_xxx behavior is fine for all drivers, so we
permit op==NULL to imply the default behavior.

This provides a more uniform behavior across all drivers, eliminating
ethtool(8) "ioctl not supported" errors on older drivers that had
not been updated for the latest sub-ioctls.

The ethtool_op_xxx() functions are left exported, in case anyone
wishes to call them directly from a driver-private implementation --
a not-uncommon case.  Should an ethtool_op_xxx() helper remain unused
for a while, except by net/core/ethtool.c, we can un-export it at a
later date.

[ Resolved conflicts with set/get value ethtool patch... -DaveM ]

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:17 -07:00
Denis Cheng
ff8ac60948 drivers/net/: all drivers/net/ cleanup with ARRAY_SIZE
Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:51:15 -07:00
Ralf Baechle
10d024c1b2 [NET]: Nuke SET_MODULE_OWNER macro.
It's been a useless no-op for long enough in 2.6 so I figured it's time to
remove it.  The number of people that could object because they're
maintaining unified 2.4 and 2.6 drivers is probably rather small.

[ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:13 -07:00
Stephen Hemminger
bea3348eef [NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.

In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.

The signature of the ->poll() call back goes from:

	int foo_poll(struct net_device *dev, int *budget)

to

	int foo_poll(struct napi_struct *napi, int budget)

The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract).  The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.

The napi_struct is to be embedded in the device driver private data
structures.

Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler.  Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.

With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.

Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.

[ Ported to current tree and all drivers converted.  Integrated
  Stephen's follow-on kerneldoc additions, and restored poll_list
  handling to the old style to fix mutual exclusion issues.  -DaveM ]

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:45 -07:00
Michael Chan
cd46171c72 [BNX2]: Add PHY workaround for 5709 A1.
Add the DIS_EARLY_DAC PHY workaround for 5709 A1.  Without it, link
sometimes does not come up.

Update version to 1.6.5.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-20 12:14:21 -07:00
Michael Chan
594a9dfae7 [BNX2]: Add write posting comment.
Add comment to explain why we cannot read back after chip reset
before delaying.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 15:39:42 -07:00
Arjan van de Ven
8e54588161 [BNX2]: Use msleep().
bnx2.c (incorrectly) sets current->state directly to
TASK_UNINTERRUPTIBLE, without going through set_task_state(). However
all the code wants to do is an msleep so just make it do that instead...

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 14:34:43 -07:00
Michael Chan
6caebb0229 [BNX2]: Fix suspend/resume problem.
The device would not resume properly if it was shutdown before the system
was suspended.  In such scenario where the netif_running state is 0,
bnx2_suspend() would not save the PCI state and so the memory enable bit
and bus master enable bit would be lost.

We fix this by always saving and restoring the PCI state in
bnx2_suspend() and bnx2_resume() regardless of netif_running() state.

Update version to 1.6.4.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-03 20:57:25 -07:00
Matthew Wilcox
313674afa8 [NET]: ethtool_perm_addr only has one implementation
All drivers implement ethtool get_perm_addr the same way -- by calling
the generic function.  So we can inline the generic function into the
caller and avoid going through the drivers.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31 14:00:29 -07:00
Michael Chan
dd121c4bbf [BNX2]: Update version to 1.6.3.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18 01:46:49 -07:00
Michael Chan
7ea6920ee9 [BNX2]: Use constants for stats ticks.
Change all stats related magic numbers to constants.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18 01:46:48 -07:00
Michael Chan
c2d3db8c7c [BNX2]: Add delay before reading firmware version.
The management firmware may still be loading during bnx2_init_one()
because of the D3hot -> D0 transition and the firmware version may
not be available without waiting a bit.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18 01:46:47 -07:00
Michael Chan
e30372c912 [BNX2]: Support NVRAM on 5709.
The NVRAM interface is slightly modified on the 5709.  To properly
support it, we need to change the buffered flag in the flash data
structure into multiple flags to indicate buffered operation, address
translation, and the use of write enable (WREN).  The 5709 flash
only requires the buffered operation bit to be set.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-18 01:46:46 -07:00
Michael Chan
6460d948f3 [NET]: Add ethtool support for NETIF_F_IPV6_CSUM devices.
Add ethtool utility function to set or clear IPV6_CSUM feature flag.
Modify tg3.c and bnx2.c to use this function when doing ethtool -K
to change tx checksum.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 19:07:52 -07:00
Linus Torvalds
de081fa517 Revert "[BNX2]: Seems to not need net/tcp.h"
This reverts commit 963bd949b1.  The
driver _does_ need the networking header files;

	  CC [M]  drivers/net/bnx2.o
	drivers/net/bnx2.c: In function 'bnx2_start_xmit':
	drivers/net/bnx2.c:5177: warning: implicit declaration of function 'tcp_optlen'
	drivers/net/bnx2.c:5181: error: invalid application of 'sizeof' to incomplete type 'struct ipv6hdr'
	drivers/net/bnx2.c:5202: error: invalid application of 'sizeof' to incomplete type 'struct tcphdr'
	drivers/net/bnx2.c:5207: warning: implicit declaration of function 'tcp_hdr'
	drivers/net/bnx2.c:5207: error: invalid type argument of '->'
	make[2]: *** [drivers/net/bnx2.o] Error 1
	make[1]: *** [drivers/net] Error 2
	make: *** [drivers] Error 2

Cc: Ilpo Jävinen <ilpo.jarvinen@helsinki.fi>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12 16:42:13 -07:00
Linus Torvalds
21ba0f88ae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
  PCI: Only build PCI syscalls on architectures that want them
  PCI: limit pci_get_bus_and_slot to domain 0
  PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
  PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
  PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
  PCI: hotplug: pciehp: wait for 1 second after power off slot
  PCI: pci_set_power_state(): check for PM capabilities earlier
  PCI: cpci_hotplug: Convert to use the kthread API
  PCI: add pci_try_set_mwi
  PCI: pcie: remove SPIN_LOCK_UNLOCKED
  PCI: ROUND_UP macro cleanup in drivers/pci
  PCI: remove pci_dac_dma_... APIs
  PCI: pci-x-pci-express-read-control-interfaces cleanups
  PCI: Fix typo in include/linux/pci.h
  PCI: pci_ids, remove double or more empty lines
  PCI: pci_ids, add atheros and 3com_2 vendors
  PCI: pci_ids, reorder some entries
  PCI: i386: traps, change VENDOR to DEVICE
  PCI: ATM: lanai, change VENDOR to DEVICE
  PCI: Change all drivers to use pci_device->revision
  ...
2007-07-12 13:40:57 -07:00
Auke Kok
44c10138fd PCI: Change all drivers to use pci_device->revision
Instead of all drivers reading pci config space to get the revision
ID, they can now use the pci_device->revision member.

This exposes some issues where drivers where reading a word or a dword
for the revision number, and adding useless error-handling around the
read. Some drivers even just read it for no purpose of all.

In devices where the revision ID is being copied over and used in what
appears to be the equivalent of hotpath, I have left the copy code
and the cached copy as not to influence the driver's performance.

Compile tested with make all{yes,mod}config on x86_64 and i386.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:10 -07:00
Ilpo Järvinen
963bd949b1 [BNX2]: Seems to not need net/tcp.h
Got bored to always recompile it for no reason.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:18:45 -07:00
Michael Chan
3a334b34b6 [BNX2]: Update version to 1.6.2.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:18:44 -07:00
Michael Chan
58fc2ea405 [BNX2]: Print management firmware version.
Add management firmware version for ethtool -i.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:18:38 -07:00
Michael Chan
df149d70e1 [BNX2]: Enhance the heartbeat.
In addition to the periodic heartbeat, we're adding a heartbeat
request interrupt when the heartbeat is late.  This is needed during
netpoll where the timer is not available.  -rt kernels will also
benefit since the timer is not as accurate.

[ We discussed this patch last time and we decided that the -rt
  kernel problem alone did not justify this patch.  I think the
  netpoll problem makes this patch necessary. ]

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:18:36 -07:00
Michael Chan
b8a7ce7bed [BNX2]: Reduce spurious INTA interrupts.
Spurious interrupts are often encountered especially on systems
using the 8259 PIC mode.  This is because the I/O write to deassert
the interrupt is posted and won't get to the chip immediately.  As
a result, the IRQ may remain asserted after the IRQ handler exits,
causing spurious interrupts.

Add read back to flush the I/O write to deassert the IRQ immediately.
We also store the last_status_idx immediately in the IRQ handler to
help detect whether the interrupt is ours or not when the IRQ is
entered again before ->poll gets called.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:18:35 -07:00
Michael Chan
9b1084b8f9 [BNX2]: Modify link up message.
Modify the link up dmesg to report remote copper or Serdes link.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:18:34 -07:00
Michael Chan
7b6b83474c [BNX2]: Add ethtool support for remote PHY.
Modify the driver's ethtool_ops->get_settings and set_settings
functions to support remote PHY.  Users control the remote copper
PHY settings by specifying link settings for the tp (twisted pair)
port.

The nway_reset function is also modified to support remote PHY.
mii-tool operations are not supported on remote PHY and we will
return -EOPNOTSUPP.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:18:33 -07:00
Michael Chan
0d8a657105 [BNX2]: Add support for remote PHY.
In blade servers, the Serdes PHY in 5708S can control the remote
copper PHY through autonegotiation on the backplane.  This patch adds
the logic to interface with the firmware to control the remote PHY
autonegotiation and to handle remote PHY link events.

When remote PHY is present, the 5708S Serdes device practically
becomes a copper device with full control over the 1000Base-T
link settings.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:18:32 -07:00
Michael Chan
deaf391b4c [BNX2]: Add bnx2_set_default_link().
Put existing code to setup the default link settings in this new
function.  This makes it easier to support the remote PHY feature in
the next few patches.

Also change ETHTOOL_ALL_FIBRE_SPEED to include 2500Mbps if supported.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:18:30 -07:00
Stephen Hemminger
d212f87b06 [NET]: IPV6 checksum offloading in network devices
The existing model for checksum offload does not correctly handle
devices that can offload IPV4 and IPV6 only. The NETIF_F_HW_CSUM flag
implies device can do any arbitrary protocol.

This patch:
 * adds NETIF_F_IPV6_CSUM for those devices
 * fixes bnx2 and tg3 devices that need it
 * add NETIF_F_IPV6_CSUM to ipv6 output (incl GSO)
 * fixes assumptions about NETIF_F_ALL_CSUM in nat
 * adjusts bridge union of checksumming computation

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:15:52 -07:00
Michael Chan
b91b9fd112 [BNX2]: Update version and reldate.
Update to version 1.5.11.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07 13:38:40 -07:00
Michael Chan
02537b0676 [BNX2]: Fix occasional counter corruption on 5708.
The statistics block DMA on 5708 can be messed up occasionally on the
average of about once per hour.  If the user is reading the counters
within one second after the corruption, the counters will be all
messed up.  One second later, the counters will be ok again until the
next corruption occurs.

The workaround is to disable the periodic statistics DMA.  Instead,
we manually trigger the DMA once a second in bnx2_timer().  This
manual trigger of the DMA avoids the problem.

As a consequence, we can only allow 0 or 1 second settings for
ethtool -C statistics block.

Thanks to Jean-Daniel Pauget <jd@disjunkt.com> and
CaT <cat@zip.com.au> for reporting this rare problem.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07 13:38:39 -07:00
Michael Chan
0aa38df7cd [BNX2]: Enable DMA on 5709.
Add missing code to enable DMA on 5709 A1.  The bit is a no-op on A0
and therefore can be set on all 5709 chips.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07 13:38:38 -07:00
Michael Chan
641bdcd56c [BNX2]: Add missing wait in bnx2_init_5709_context().
For correctness, we need to wait for the MEM_INIT bit to be cleared
in the BNX2_CTX_COMMAND register before proceeding.

[Added return -EBUSY when the MEM_INIT bit doesn't clear, suggested
by Jeff Garzik.]

Signed-off-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07 13:38:37 -07:00