Commit Graph

573 Commits

Author SHA1 Message Date
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Jiri Kosina
d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
David S. Miller
28b4d5cc17 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/net/pcmcia/fmvj18x_cs.c
	drivers/net/pcmcia/nmclan_cs.c
	drivers/net/pcmcia/xirc2ps_cs.c
	drivers/net/wireless/ray_cs.c
2009-12-05 15:22:26 -08:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Eric Paris
0bce952799 SELinux: print denials for buggy kernel with unknown perms
Historically we've seen cases where permissions are requested for classes
where they do not exist.  In particular we have seen CIFS forget to set
i_mode to indicate it is a directory so when we later check something like
remove_name we have problems since it wasn't defined in tclass file.  This
used to result in a avc which included the permission 0x2000 or something.
Currently the kernel will deny the operations (good thing) but will not
print ANY information (bad thing).  First the auditdeny field is no
extended to include unknown permissions.  After that is fixed the logic in
avc_dump_query to output this information isn't right since it will remove
the permission from the av and print the phrase "<NULL>".  This takes us
back to the behavior before the classmap rewrite.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-11-24 14:30:49 +11:00
Eric Dumazet
8964be4a9a net: rename skb->iif to skb->skb_iif
To help grep games, rename iif to skb_iif

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20 15:35:04 -08:00
Eric Paris
dd8dbf2e68 security: report the module name to security_module_request
For SELinux to do better filtering in userspace we send the name of the
module along with the AVC denial when a program is denied module_request.

Example output:

type=SYSCALL msg=audit(11/03/2009 10:59:43.510:9) : arch=x86_64 syscall=write success=yes exit=2 a0=3 a1=7fc28c0d56c0 a2=2 a3=7fffca0d7440 items=0 ppid=1727 pid=1729 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=unset comm=rpc.nfsd exe=/usr/sbin/rpc.nfsd subj=system_u:system_r:nfsd_t:s0 key=(null)
type=AVC msg=audit(11/03/2009 10:59:43.510:9) : avc:  denied  { module_request } for  pid=1729 comm=rpc.nfsd kmod="net-pf-10" scontext=system_u:system_r:nfsd_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=system

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-11-10 09:33:46 +11:00
Eric Paris
6e8e16c7bc SELinux: add .gitignore files for dynamic classes
The SELinux dynamic class work in c6d3aaa4e3
creates a number of dynamic header files and scripts.  Add .gitignore files
so git doesn't complain about these.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2009-10-24 09:42:27 +08:00
Stephen Smalley
b7f3008ad1 SELinux: fix locking issue introduced with c6d3aaa4e3
Ensure that we release the policy read lock on all exit paths from
security_compute_av.

Signed-off-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2009-10-20 09:22:07 +09:00
Stephen Smalley
941fc5b2bf selinux: drop remapping of netlink classes
Drop remapping of netlink classes and bypass of permission checking
based on netlink message type for policy version < 18.  This removes
compatibility code introduced when the original single netlink
security class used for all netlink sockets was split into
finer-grained netlink classes based on netlink protocol and when
permission checking was added based on netlink message type in Linux
2.6.8.  The only known distribution that shipped with SELinux and
policy < 18 was Fedora Core 2, which was EOL'd on 2005-04-11.

Given that the remapping code was never updated to address the
addition of newer netlink classes, that the corresponding userland
support was dropped in 2005, and that the assumptions made by the
remapping code about the fixed ordering among netlink classes in the
policy may be violated in the future due to the dynamic class/perm
discovery support, we should drop this compatibility code now.

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2009-10-07 21:56:46 +11:00
Stephen Smalley
8753f6bec3 selinux: generate flask headers during kernel build
Add a simple utility (scripts/selinux/genheaders) and invoke it to
generate the kernel-private class and permission indices in flask.h
and av_permissions.h automatically during the kernel build from the
security class mapping definitions in classmap.h.  Adding new kernel
classes and permissions can then be done just by adding them to classmap.h.

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2009-10-07 21:56:44 +11:00
Stephen Smalley
c6d3aaa4e3 selinux: dynamic class/perm discovery
Modify SELinux to dynamically discover class and permission values
upon policy load, based on the dynamic object class/perm discovery
logic from libselinux.  A mapping is created between kernel-private
class and permission indices used outside the security server and the
policy values used within the security server.

The mappings are only applied upon kernel-internal computations;
similar mappings for the private indices of userspace object managers
is handled on a per-object manager basis by the userspace AVC.  The
interfaces for compute_av and transition_sid are split for kernel
vs. userspace; the userspace functions are distinguished by a _user
suffix.

The kernel-private class indices are no longer tied to the policy
values and thus do not need to skip indices for userspace classes;
thus the kernel class index values are compressed.  The flask.h
definitions were regenerated by deleting the userspace classes from
refpolicy's definitions and then regenerating the headers.  Going
forward, we can just maintain the flask.h, av_permissions.h, and
classmap.h definitions separately from policy as they are no longer
tied to the policy values.  The next patch introduces a utility to
automate generation of flask.h and av_permissions.h from the
classmap.h definitions.

The older kernel class and permission string tables are removed and
replaced by a single security class mapping table that is walked at
policy load to generate the mapping.  The old kernel class validation
logic is completely replaced by the mapping logic.

The handle unknown logic is reworked.  reject_unknown=1 is handled
when the mappings are computed at policy load time, similar to the old
handling by the class validation logic.  allow_unknown=1 is handled
when computing and mapping decisions - if the permission was not able
to be mapped (i.e. undefined, mapped to zero), then it is
automatically added to the allowed vector.  If the class was not able
to be mapped (i.e. undefined, mapped to zero), then all permissions
are allowed for it if allow_unknown=1.

avc_audit leverages the new security class mapping table to lookup the
class and permission names from the kernel-private indices.

The mdp program is updated to use the new table when generating the
class definitions and allow rules for a minimal boot policy for the
kernel.  It should be noted that this policy will not include any
userspace classes, nor will its policy index values for the kernel
classes correspond with the ones in refpolicy (they will instead match
the kernel-private indices).

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2009-10-07 21:56:42 +11:00
Eric Paris
af8ff04917 SELinux: reset the security_ops before flushing the avc cache
This patch resets the security_ops to the secondary_ops before it flushes
the avc.  It's still possible that a task on another processor could have
already passed the security_ops dereference and be executing an selinux hook
function which would add a new avc entry.  That entry would still not be
freed.  This should however help to reduce the number of needless avcs the
kernel has when selinux is disabled at run time.  There is no wasted
memory if selinux is disabled on the command line or not compiled.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-30 19:17:06 +10:00
Oleg Nesterov
0b7570e77f do_wait() wakeup optimization: change __wake_up_parent() to use filtered wakeup
Ratan Nalumasu reported that in a process with many threads doing
unnecessary wakeups.  Every waiting thread in the process wakes up to loop
through the children and see that the only ones it cares about are still
not ready.

Now that we have struct wait_opts we can change do_wait/__wake_up_parent
to use filtered wakeups.

We can make child_wait_callback() more clever later, right now it only
checks eligible_child().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ratan Nalumasu <rnalumasu@gmail.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24 07:20:59 -07:00
Eric Paris
5224ee0863 SELinux: do not destroy the avc_cache_nodep
The security_ops reset done when SELinux is disabled at run time is done
after the avc cache is freed and after the kmem_cache for the avc is also
freed.  This means that between the time the selinux disable code destroys
the avc_node_cachep another process could make a security request and could
try to allocate from the cache.  We are just going to leave the cachep around,
like we always have.

SELinux:  Disabled at runtime.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff81122537>] kmem_cache_alloc+0x9a/0x185
PGD 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file:
CPU 1
Modules linked in:
Pid: 12, comm: khelper Not tainted 2.6.31-tip-05525-g0eeacc6-dirty #14819
System Product Name
RIP: 0010:[<ffffffff81122537>]  [<ffffffff81122537>]
kmem_cache_alloc+0x9a/0x185
RSP: 0018:ffff88003f9258b0  EFLAGS: 00010086
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000078c0129e
RDX: 0000000000000000 RSI: ffffffff8130b626 RDI: ffffffff81122528
RBP: ffff88003f925900 R08: 0000000078c0129e R09: 0000000000000001
R10: 0000000000000000 R11: 0000000078c0129e R12: 0000000000000246
R13: 0000000000008020 R14: ffff88003f8586d8 R15: 0000000000000001
FS:  0000000000000000(0000) GS:ffff880002b00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 0000000001001000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: ffffffff827bd420 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process khelper (pid: 12, threadinfo ffff88003f924000, task
ffff88003f928000)
Stack:
 0000000000000246 0000802000000246 ffffffff8130b626 0000000000000001
<0> 0000000078c0129e 0000000000000000 ffff88003f925a70 0000000000000002
<0> 0000000000000001 0000000000000001 ffff88003f925960 ffffffff8130b626
Call Trace:
 [<ffffffff8130b626>] ? avc_alloc_node+0x36/0x273
 [<ffffffff8130b626>] avc_alloc_node+0x36/0x273
 [<ffffffff8130b545>] ? avc_latest_notif_update+0x7d/0x9e
 [<ffffffff8130b8b4>] avc_insert+0x51/0x18d
 [<ffffffff8130bcce>] avc_has_perm_noaudit+0x9d/0x128
 [<ffffffff8130bf20>] avc_has_perm+0x45/0x88
 [<ffffffff8130f99d>] current_has_perm+0x52/0x6d
 [<ffffffff8130fbb2>] selinux_task_create+0x2f/0x45
 [<ffffffff81303bf7>] security_task_create+0x29/0x3f
 [<ffffffff8105c6ba>] copy_process+0x82/0xdf0
 [<ffffffff81091578>] ? register_lock_class+0x2f/0x36c
 [<ffffffff81091a13>] ? mark_lock+0x2e/0x1e1
 [<ffffffff8105d596>] do_fork+0x16e/0x382
 [<ffffffff81091578>] ? register_lock_class+0x2f/0x36c
 [<ffffffff810d9166>] ? probe_workqueue_execution+0x57/0xf9
 [<ffffffff81091a13>] ? mark_lock+0x2e/0x1e1
 [<ffffffff810d9166>] ? probe_workqueue_execution+0x57/0xf9
 [<ffffffff8100cdb2>] kernel_thread+0x82/0xe0
 [<ffffffff81078b1f>] ? ____call_usermodehelper+0x0/0x139
 [<ffffffff8100ce10>] ? child_rip+0x0/0x20
 [<ffffffff81078aea>] ? __call_usermodehelper+0x65/0x9a
 [<ffffffff8107a5c7>] run_workqueue+0x171/0x27e
 [<ffffffff8107a573>] ? run_workqueue+0x11d/0x27e
 [<ffffffff81078a85>] ? __call_usermodehelper+0x0/0x9a
 [<ffffffff8107a7bc>] worker_thread+0xe8/0x10f
 [<ffffffff810808e2>] ? autoremove_wake_function+0x0/0x63
 [<ffffffff8107a6d4>] ? worker_thread+0x0/0x10f
 [<ffffffff8108042e>] kthread+0x91/0x99
 [<ffffffff8100ce1a>] child_rip+0xa/0x20
 [<ffffffff8100c754>] ? restore_args+0x0/0x30
 [<ffffffff8108039d>] ? kthread+0x0/0x99
 [<ffffffff8100ce10>] ? child_rip+0x0/0x20
Code: 0f 85 99 00 00 00 9c 58 66 66 90 66 90 49 89 c4 fa 66 66 90 66 66 90
e8 83 34 fb ff e8 d7 e9 26 00 48 98 49 8b 94 c6 10 01 00 00 <48> 8b 1a 44
8b 7a 18 48 85 db 74 0f 8b 42 14 48 8b 04 c3 ff 42
RIP  [<ffffffff81122537>] kmem_cache_alloc+0x9a/0x185
 RSP <ffff88003f9258b0>
CR2: 0000000000000000
---[ end trace 42f41a982344e606 ]---

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-23 11:16:20 -07:00
Eric Paris
4e6d0bffd3 SELinux: flush the avc before disabling SELinux
Before SELinux is disabled at boot it can create AVC entries.  This patch
will flush those entries before disabling SELinux.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-14 12:34:11 +10:00
Eric Paris
008574b111 SELinux: seperate avc_cache flushing
Move the avc_cache flushing into it's own function so it can be reused when
disabling SELinux.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-14 12:34:09 +10:00
Eric Paris
ed868a5698 Creds: creds->security can be NULL is selinux is disabled
__validate_process_creds should check if selinux is actually enabled before
running tests on the selinux portion of the credentials struct.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-14 12:34:07 +10:00
David P. Quigley
ddd29ec659 sysfs: Add labeling support for sysfs
This patch adds a setxattr handler to the file, directory, and symlink
inode_operations structures for sysfs. The patch uses hooks introduced in the
previous patch to handle the getting and setting of security information for
the sysfs inodes. As was suggested by Eric Biederman the struct iattr in the
sysfs_dirent structure has been replaced by a structure which contains the
iattr, secdata and secdata length to allow the changes to persist in the event
that the inode representing the sysfs_dirent is evicted. Because sysfs only
stores this information when a change is made all the optional data is moved
into one dynamically allocated field.

This patch addresses an issue where SELinux was denying virtd access to the PCI
configuration entries in sysfs. The lack of setxattr handlers for sysfs
required that a single label be assigned to all entries in sysfs. Granting virtd
access to every entry in sysfs is not an acceptable solution so fine grained
labeling of sysfs is required such that individual entries can be labeled
appropriately.

[sds:  Fixed compile-time warnings, coding style, and setting of inode security init flags.]

Signed-off-by: David P. Quigley <dpquigl@tycho.nsa.gov>
Signed-off-by: Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-10 10:11:29 +10:00
David P. Quigley
1ee65e37e9 LSM/SELinux: inode_{get,set,notify}secctx hooks to access LSM security context information.
This patch introduces three new hooks. The inode_getsecctx hook is used to get
all relevant information from an LSM about an inode. The inode_setsecctx is
used to set both the in-core and on-disk state for the inode based on a context
derived from inode_getsecctx.The final hook inode_notifysecctx will notify the
LSM of a change for the in-core state of the inode in question. These hooks are
for use in the labeled NFS code and addresses concerns of how to set security
on an inode in a multi-xattr LSM. For historical reasons Stephen Smalley's
explanation of the reason for these hooks is pasted below.

Quote Stephen Smalley

inode_setsecctx:  Change the security context of an inode.  Updates the
in core security context managed by the security module and invokes the
fs code as needed (via __vfs_setxattr_noperm) to update any backing
xattrs that represent the context.  Example usage:  NFS server invokes
this hook to change the security context in its incore inode and on the
backing file system to a value provided by the client on a SETATTR
operation.

inode_notifysecctx:  Notify the security module of what the security
context of an inode should be.  Initializes the incore security context
managed by the security module for this inode.  Example usage:  NFS
client invokes this hook to initialize the security context in its
incore inode to the value provided by the server for the file when the
server returned the file's attributes to the client.

Signed-off-by: David P. Quigley <dpquigl@tycho.nsa.gov>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-10 10:11:24 +10:00
David Howells
ee18d64c1f KEYS: Add a keyctl to install a process's session keyring on its parent [try #6]
Add a keyctl to install a process's session keyring onto its parent.  This
replaces the parent's session keyring.  Because the COW credential code does
not permit one process to change another process's credentials directly, the
change is deferred until userspace next starts executing again.  Normally this
will be after a wait*() syscall.

To support this, three new security hooks have been provided:
cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in
the blank security creds and key_session_to_parent() - which asks the LSM if
the process may replace its parent's session keyring.

The replacement may only happen if the process has the same ownership details
as its parent, and the process has LINK permission on the session keyring, and
the session keyring is owned by the process, and the LSM permits it.

Note that this requires alteration to each architecture's notify_resume path.
This has been done for all arches barring blackfin, m68k* and xtensa, all of
which need assembly alteration to support TIF_NOTIFY_RESUME.  This allows the
replacement to be performed at the point the parent process resumes userspace
execution.

This allows the userspace AFS pioctl emulation to fully emulate newpag() and
the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to
alter the parent process's PAG membership.  However, since kAFS doesn't use
PAGs per se, but rather dumps the keys into the session keyring, the session
keyring of the parent must be replaced if, for example, VIOCSETTOK is passed
the newpag flag.

This can be tested with the following program:

	#include <stdio.h>
	#include <stdlib.h>
	#include <keyutils.h>

	#define KEYCTL_SESSION_TO_PARENT	18

	#define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0)

	int main(int argc, char **argv)
	{
		key_serial_t keyring, key;
		long ret;

		keyring = keyctl_join_session_keyring(argv[1]);
		OSERROR(keyring, "keyctl_join_session_keyring");

		key = add_key("user", "a", "b", 1, keyring);
		OSERROR(key, "add_key");

		ret = keyctl(KEYCTL_SESSION_TO_PARENT);
		OSERROR(ret, "KEYCTL_SESSION_TO_PARENT");

		return 0;
	}

Compiled and linked with -lkeyutils, you should see something like:

	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	355907932 --alswrv   4043    -1   \_ keyring: _uid.4043
	[dhowells@andromeda ~]$ /tmp/newpag
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	1055658746 --alswrv   4043  4043   \_ user: a
	[dhowells@andromeda ~]$ /tmp/newpag hello
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: hello
	340417692 --alswrv   4043  4043   \_ user: a

Where the test program creates a new session keyring, sticks a user key named
'a' into it and then installs it on its parent.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 21:29:22 +10:00
David Howells
e0e817392b CRED: Add some configurable debugging [try #6]
Add a config option (CONFIG_DEBUG_CREDENTIALS) to turn on some debug checking
for credential management.  The additional code keeps track of the number of
pointers from task_structs to any given cred struct, and checks to see that
this number never exceeds the usage count of the cred struct (which includes
all references, not just those from task_structs).

Furthermore, if SELinux is enabled, the code also checks that the security
pointer in the cred struct is never seen to be invalid.

This attempts to catch the bug whereby inode_has_perm() faults in an nfsd
kernel thread on seeing cred->security be a NULL pointer (it appears that the
credential struct has been previously released):

	http://www.kerneloops.org/oops.php?number=252883

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-02 21:29:01 +10:00
Paul Moore
ed6d76e4c3 selinux: Support for the new TUN LSM hooks
Add support for the new TUN LSM hooks: security_tun_dev_create(),
security_tun_dev_post_create() and security_tun_dev_attach().  This includes
the addition of a new object class, tun_socket, which represents the socks
associated with TUN devices.  The _tun_dev_create() and _tun_dev_post_create()
hooks are fairly similar to the standard socket functions but _tun_dev_attach()
is a bit special.  The _tun_dev_attach() is unique because it involves a
domain attaching to an existing TUN device and its associated tun_socket
object, an operation which does not exist with standard sockets and most
closely resembles a relabel operation.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: Eric Paris <eparis@parisplace.org>
Signed-off-by: James Morris <jmorris@namei.org>
2009-09-01 08:29:52 +10:00
Amerigo Wang
bc6a6008e5 selinux: adjust rules for ATTR_FORCE
As suggested by OGAWA Hirofumi in thread:
http://lkml.org/lkml/2009/8/7/132, we should let selinux_inode_setattr()
to match our ATTR_* rules.  ATTR_FORCE should not force things like
ATTR_SIZE.

[hirofumi@mail.parknet.co.jp: tweaks]
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Eric Paris <eparis@redhat.com>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-21 14:25:30 +10:00
James Morris
ece13879e7 Merge branch 'master' into next
Conflicts:
	security/Kconfig

Manual fix.

Signed-off-by: James Morris <jmorris@namei.org>
2009-08-20 09:18:42 +10:00
Eric Paris
788084aba2 Security/SELinux: seperate lsm specific mmap_min_addr
Currently SELinux enforcement of controls on the ability to map low memory
is determined by the mmap_min_addr tunable.  This patch causes SELinux to
ignore the tunable and instead use a seperate Kconfig option specific to how
much space the LSM should protect.

The tunable will now only control the need for CAP_SYS_RAWIO and SELinux
permissions will always protect the amount of low memory designated by
CONFIG_LSM_MMAP_MIN_ADDR.

This allows users who need to disable the mmap_min_addr controls (usual reason
being they run WINE as a non-root user) to do so and still have SELinux
controls preventing confined domains (like a web server) from being able to
map some area of low memory.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-17 15:09:11 +10:00
Eric Paris
8cf948e744 SELinux: call cap_file_mmap in selinux_file_mmap
Currently SELinux does not check CAP_SYS_RAWIO in the file_mmap hook.  This
means there is no DAC check on the ability to mmap low addresses in the
memory space.  This function adds the DAC check for CAP_SYS_RAWIO while
maintaining the selinux check on mmap_zero.  This means that processes
which need to mmap low memory will need CAP_SYS_RAWIO and mmap_zero but will
NOT need the SELinux sys_rawio capability.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-17 15:08:48 +10:00
Thomas Liu
2bf4969032 SELinux: Convert avc_audit to use lsm_audit.h
Convert avc_audit in security/selinux/avc.c to use lsm_audit.h,
for better maintainability.

 - changed selinux to use common_audit_data instead of
    avc_audit_data
 - eliminated code in avc.c and used code from lsm_audit.h instead.

Had to add a LSM_AUDIT_NO_AUDIT to lsm_audit.h so that avc_audit
can call common_lsm_audit and do the pre and post callbacks without
doing the actual dump.  This makes it so that the patched version
behaves the same way as the unpatched version.

Also added a denied field to the selinux_audit_data private space,
once again to make it so that the patched version behaves like the
unpatched.

I've tested and confirmed that AVCs look the same before and after
this patch.

Signed-off-by: Thomas Liu <tliu@redhat.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-17 08:37:18 +10:00
Eric Paris
25354c4fee SELinux: add selinux_kernel_module_request
This patch adds a new selinux hook so SELinux can arbitrate if a given
process should be allowed to trigger a request for the kernel to try to
load a module.  This is a different operation than a process trying to load
a module itself, which is already protected by CAP_SYS_MODULE.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-14 11:18:40 +10:00
James Morris
314dabb83a SELinux: fix memory leakage in /security/selinux/hooks.c
Fix memory leakage in /security/selinux/hooks.c

The buffer always needs to be freed here; we either error
out or allocate more memory.

Reported-by: iceberg <strakh@ispras.ru>
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
2009-08-11 08:37:13 +10:00
Eric Paris
a2551df7ec Security/SELinux: seperate lsm specific mmap_min_addr
Currently SELinux enforcement of controls on the ability to map low memory
is determined by the mmap_min_addr tunable.  This patch causes SELinux to
ignore the tunable and instead use a seperate Kconfig option specific to how
much space the LSM should protect.

The tunable will now only control the need for CAP_SYS_RAWIO and SELinux
permissions will always protect the amount of low memory designated by
CONFIG_LSM_MMAP_MIN_ADDR.

This allows users who need to disable the mmap_min_addr controls (usual reason
being they run WINE as a non-root user) to do so and still have SELinux
controls preventing confined domains (like a web server) from being able to
map some area of low memory.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-06 09:02:23 +10:00
Eric Paris
84336d1a77 SELinux: call cap_file_mmap in selinux_file_mmap
Currently SELinux does not check CAP_SYS_RAWIO in the file_mmap hook.  This
means there is no DAC check on the ability to mmap low addresses in the
memory space.  This function adds the DAC check for CAP_SYS_RAWIO while
maintaining the selinux check on mmap_zero.  This means that processes
which need to mmap low memory will need CAP_SYS_RAWIO and mmap_zero but will
NOT need the SELinux sys_rawio capability.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-06 09:02:21 +10:00
Oleg Nesterov
5bb459bb45 kernel: rename is_single_threaded(task) to current_is_single_threaded(void)
- is_single_threaded(task) is not safe unless task == current,
  we can't use task->signal or task->mm.

- it doesn't make sense unless task == current, the task can
  fork right after the check.

Rename it to current_is_single_threaded() and kill the argument.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-07-17 09:10:42 +10:00
James Morris
be940d6279 Revert "SELinux: Convert avc_audit to use lsm_audit.h"
This reverts commit 8113a8d80f.

The patch causes a stack overflow on my system during boot.

Signed-off-by: James Morris <jmorris@namei.org>
2009-07-13 10:39:36 +10:00
Thomas Liu
8113a8d80f SELinux: Convert avc_audit to use lsm_audit.h
Convert avc_audit in security/selinux/avc.c to use lsm_audit.h,
for better maintainability and for less code duplication.

 - changed selinux to use common_audit_data instead of
   avc_audit_data
 - eliminated code in avc.c and used code from lsm_audit.h instead.

I have tested to make sure that the avcs look the same before and
after this patch.

Signed-off-by: Thomas Liu <tliu@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-07-13 07:54:48 +10:00
Thomas Liu
89c86576ec selinux: clean up avc node cache when disabling selinux
Added a call to free the avc_node_cache when inside selinux_disable because
it should not waste resources allocated during avc_init if SELinux is disabled
and the cache will never be used.

Signed-off-by: Thomas Liu <tliu@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-06-25 08:29:16 +10:00
Ingo Molnar
9e48858f7d security: rename ptrace_may_access => ptrace_access_check
The ->ptrace_may_access() methods are named confusingly - the real
ptrace_may_access() returns a bool, while these security checks have
a retval convention.

Rename it to ptrace_access_check, to reduce the confusion factor.

[ Impact: cleanup, no code changed ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: James Morris <jmorris@namei.org>
2009-06-25 00:18:05 +10:00
Stephen Smalley
20dda18be9 selinux: restore optimization to selinux_file_permission
Restore the optimization to skip revalidation in selinux_file_permission
if nothing has changed since the dentry_open checks, accidentally removed by
389fb800.  Also remove redundant test from selinux_revalidate_file_permission.

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: Paul Moore <paul.moore@hp.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-06-23 08:19:58 +10:00
James Morris
d905163c5b Merge branch 'master' into next 2009-06-19 08:20:55 +10:00
KaiGai Kohei
44c2d9bdd7 Add audit messages on type boundary violations
The attached patch adds support to generate audit messages on two cases.

The first one is a case when a multi-thread process tries to switch its
performing security context using setcon(3), but new security context is
not bounded by the old one.

  type=SELINUX_ERR msg=audit(1245311998.599:17):        \
      op=security_bounded_transition result=denied      \
      oldcontext=system_u:system_r:httpd_t:s0           \
      newcontext=system_u:system_r:guest_webapp_t:s0

The other one is a case when security_compute_av() masked any permissions
due to the type boundary violation.

  type=SELINUX_ERR msg=audit(1245312836.035:32):	\
      op=security_compute_av reason=bounds              \
      scontext=system_u:object_r:user_webapp_t:s0       \
      tcontext=system_u:object_r:shadow_t:s0:c0         \
      tclass=file perms=getattr,open

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2009-06-19 00:12:28 +10:00
KaiGai Kohei
caabbdc07d cleanup in ss/services.c
It is a cleanup patch to cut down a line within 80 columns.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
--
 security/selinux/ss/services.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
Signed-off-by: James Morris <jmorris@namei.org>
2009-06-18 21:53:44 +10:00
David S. Miller
9cbc1cb8cd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/scsi/fcoe/fcoe.c
	net/core/drop_monitor.c
	net/core/net-traces.c
2009-06-15 03:02:23 -07:00
Eric Dumazet
adf30907d6 net: skb->dst accessors
Define three accessors to get/set dst attached to a skb

struct dst_entry *skb_dst(const struct sk_buff *skb)

void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst)

void skb_dst_drop(struct sk_buff *skb)
This one should replace occurrences of :
dst_release(skb->dst)
skb->dst = NULL;

Delete skb->dst field

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03 02:51:04 -07:00
Eric Paris
850b0cee16 SELinux: define audit permissions for audit tree netlink messages
Audit trees defined 2 new netlink messages but the netlink mapping tables for
selinux permissions were not set up.  This patch maps these 2 new operations
to AUDIT_WRITE.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-06-03 07:44:53 +10:00
Stephen Smalley
c5642f4bba selinux: remove obsolete read buffer limit from sel_read_bool
On Tue, 2009-05-19 at 00:05 -0400, Eamon Walsh wrote:
> Recent versions of coreutils have bumped the read buffer size from 4K to
> 32K in several of the utilities.
>
> This means that "cat /selinux/booleans/xserver_object_manager" no longer
> works, it returns "Invalid argument" on F11.  getsebool works fine.
>
> sel_read_bool has a check for "count > PAGE_SIZE" that doesn't seem to
> be present in the other read functions.  Maybe it could be removed?

Yes, that check is obsoleted by the conversion of those functions to
using simple_read_from_buffer(), which will reduce count if necessary to
what is available in the buffer.

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-19 23:56:11 +10:00
Eric Paris
75834fc3b6 SELinux: move SELINUX_MAGIC into magic.h
The selinuxfs superblock magic is used inside the IMA code, but is being
defined in two places and could someday get out of sync.  This patch moves the
declaration into magic.h so it is only done once.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-19 08:19:00 +10:00
James Morris
d254117099 Merge branch 'master' into next 2009-05-08 17:56:47 +10:00
Stephen Smalley
65c90bca0d selinux: Fix send_sigiotask hook
The CRED patch incorrectly converted the SELinux send_sigiotask hook to
use the current task SID rather than the target task SID in its
permission check, yielding the wrong permission check.  This fixes the
hook function.  Detected by the ltp selinux testsuite and confirmed to
correct the test failure.

Signed-off-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-05 08:31:03 +10:00
Oleg Nesterov
ecd6de3c88 selinux: selinux_bprm_committed_creds() should wake up ->real_parent, not ->parent.
We shouldn't worry about the tracer if current is ptraced, exec() must not
succeed if the tracer has no rights to trace this task after cred changing.
But we should notify ->real_parent which is, well, real parent.

Also, we don't need _irq to take tasklist, and we don't need parent's
->siglock to wake_up_interruptible(real_parent->signal->wait_chldexit).
Since we hold tasklist, real_parent->signal must be stable. Otherwise
spin_lock(siglock) is not safe too and can't help anyway.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-04-30 09:08:48 +10:00
David Howells
3bcac0263f SELinux: Don't flush inherited SIGKILL during execve()
Don't flush inherited SIGKILL during execve() in SELinux's post cred commit
hook.  This isn't really a security problem: if the SIGKILL came before the
credentials were changed, then we were right to receive it at the time, and
should honour it; if it came after the creds were changed, then we definitely
should honour it; and in any case, all that will happen is that the process
will be scrapped before it ever returns to userspace.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-04-30 09:07:13 +10:00