Commit Graph

82 Commits

Author SHA1 Message Date
Bob Moore
b1cd843be7 ACPICA: Disable preservation of SCI enable bit (SCI_EN)
Preserving this bit breaks some machines. Not preserving this bit
seems to work OK in all cases, even though this goes against the
ACPI spec.

http://bugzilla.kernel.org/show_bug.cgi?id=13289

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:41:34 -04:00
Lin Ming
3362a6badb ACPICA: Region deletion: Ensure region object is removed from handler list
Prevents a possible fault when a dynamic operation region is
deleted. ACPICA BZ 507.

http://acpica.org/bugzilla/show_bug.cgi?id=507

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Alex Chiang
c446eed618 ACPICA: Eliminate extra call to NsGetParentNode
Was called twice in the same function with the same parameter.
Alex Chiang.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Bob Moore
f5407af3f2 ACPICA: Simplify internal operation region interface
Changed address parameter to a simple offset. This removes the
need for the caller to access the region object to obtain the
physical address.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Bob Moore
3c59f96081 ACPICA: Update Load() to use operation region interfaces
Replace memory mapping with region access calls. Now, all region
accesses go through the region handler as they should.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Lin Ming
b2f7ddcfcb ACPICA: New: AcpiInstallMethod - install a single control method
This interface enables the override or creation of a single
control method. Useful to repair a bug or install a missing method.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Lin Ming
e0be6f5a98 ACPICA: Invalidate DdbHandle after table unload
Mark the DdbHandle as invalid after the table it refers to is
unloaded.  This is needed because the handle itself may not be
deleted after the table unload, depending on whether it has been
stored in a named object by the caller.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Lin Ming
06366c1492 ACPICA: Fix reference count issues for DdbHandle object
Fix a problem where the DdbHandle could be prematurely deleted,
possibly causing a fault.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:51 -04:00
Bob Moore
8c725bf937 ACPICA: Simplify and optimize NsGetNextNode function
Reduced parameter count and reduced code for this frequently
used function.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:50 -04:00
Bob Moore
474caffdc1 ACPICA: Additional validation of _PRT packages (resource mgr)
Fixes a possible fault when parsing an ill-formed _PRT package.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:35:50 -04:00
Bob Moore
a76b772736 ACPICA: Fix DebugObject output for DdbHandle objects
Was putting several extra spaces on the next line.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:32:24 -04:00
Bob Moore
315c728887 ACPICA: Fix allowable release order for ASL mutex objects
The ACPI 4.0 specification has been changed to make the SyncLevel
for mutex objects more useful. When releasing a mutex, the
synclevel of the mutex must now be the same as the current sync
level. This makes more sense. This change updates the code to
match the spec.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:32:24 -04:00
Bob Moore
10a3b461a2 ACPICA: Mutex support: Fix release ordering issue and current sync level
Fixes a problem where if multiple mutexes of the same sync level
are acquired but then not released in strict opposite order, the
current sync level becomes confused and can cause errors.
ACPICA BZ 471.

http://acpica.org/bugzilla/show_bug.cgi?id=471

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:32:24 -04:00
Bob Moore
2b09ce98a2 ACPICA: Fix implementation of AML BreakPoint operator (break to debugger)
The AML BreakPoint opcode will now cause a break into the AML
debugger if it is present/configured. This matches the expected
behavior per the ACPI specification. Previously, only a message
was output.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:50 -04:00
Bob Moore
ba9c3f550e ACPICA: Fix miscellaneous warnings under gcc 4+
Some possible warnings with gcc 4+, especially with extended warnings
enabled

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:49 -04:00
Bob Moore
e4c1ebfc65 ACPICA: Miscellaneous lint changes
Unused variables/headers, casting, etc.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:49 -04:00
Bob Moore
65259094c3 ACPICA: Fix possible dereference of null pointer
Fix dereference of possibly null pointer "Predefined" in the case
where the method is not one of the predefined methods.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:49 -04:00
Bob Moore
b21245a85e ACPICA: Fix printf format warnings for 64-bit build
Fix warnings caused by size_t and ACPI_SIZE changing to 64 bits.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:49 -04:00
Bob Moore
10b6575b5d ACPICA: Fix possible warnings for ACPI_THREAD_ID on 64-bit build
Warnings can be generated for printf-like statements that output
the ACPI_THREAD_ID on 64-bit builds, since this type can expand
to 64-bits depending on how it is defined. Use the %p format
specifier to allow the output to automatically expand to 64 bits.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:48 -04:00
Bob Moore
41bdd8e980 ACPICA: Remove unused global variables
Remove two unused/obsolete variables.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:48 -04:00
Bob Moore
33a1d461d2 ACPICA: Change behavior of object copy for mutex/event objects
When copying these internal objects, cannot simply copy the
underlying OS object. A new OS object must be created.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:48 -04:00
Bob Moore
8eb7b2477c ACPICA: Fix a few warnings for gcc 3.4.4
Mostly for acpiexec, one in the core subsystem.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:48 -04:00
Bob Moore
b74be6119e ACPICA: Update error/warning interfaces
Moved the module name and line number to the end of the message.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-27 00:30:48 -04:00
Len Brown
4e3507f718 Merge branches 'release', 'bugzilla-13032', 'bugzilla-13041+', 'bugzilla-13121', 'bugzilla-13165', 'bugzilla-13243', 'bugzilla-13259', 'resume-sci-en-regression', 'thermal-regression', 'tsc-regression' and 'asus-2.6.30' into release 2009-05-16 01:55:59 -04:00
Lin Ming
975b3c474c ACPI: resume: re-enable SCI-enable workaround
The BIOS bug workaround mistakenly got disabled
when we followed the ACPI specification more closely
by ignoring OS updates to that bit.

(The BIOS is supposed to update SCI_EN, not the OS)

http://bugzilla.kernel.org/show_bug.cgi?id=13289

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-15 22:27:49 -04:00
Len Brown
5199176341 ACPICA: use acpi.* modparam namespace
Add acpi/acpica/*.c to the acpi.* modparam namespace
so that any modparams we stick into ACPICA do not
expose ACPICA filenames to users.

There are currently only two modparams in ACPICA,
just recently added for
http://bugzilla.kernel.org/show_bug.cgi?id=13041

With this change, they become

acpi.gts=1
acpi.bfs=1

rather than

hwsleep.gts=1
hwsleep.bfs=1

Signed-off-by: Len Brown <len.brown@intel.com>
2009-05-07 15:24:31 -04:00
Robert Moore
53951bd57d acpica: validate package element more carefully in acpi_rs_get_pci_routing_table_length
acpi_rs_get_pci_routing_table_length is not performing sufficient
validation on the package returned from _PRT.  It assumes a package of
packages and fails/faults if this is not the case.

We should validate each subpackage when extracted from the parent
package, and not accept objects of the wrong type, since that will just
cause the scanning to fail (likely with a kernel oops).

This can only happen with a serious BIOS bug, and is accompanied by a
warning something like this:

  ACPI Warning (nspredef-0949): \_SB_.PCI0.PEG4._PRT: Return Package type mismatch at index 0 - found Integer, expected Package [20090320]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-02 11:48:37 -07:00
Len Brown
5f855a8f0c Merge branch 'bugzilla-13036' into release 2009-04-24 10:42:21 -04:00
Len Brown
04a2e6297d Merge branch 'bugzilla-12270' into release 2009-04-24 01:35:33 -04:00
Len Brown
a38d75fa2e Revert "ACPICA: delete check for AML access to port 0x81-83"
This reverts commit fdbdc7fc79.

That temporary quick-fix is no longer necessary,
as the previous patch, a65131e942,
"I/O port protection: update for windows compatibility"
should handle this issue for all ports, including this one.

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-24 00:32:52 -04:00
Lin Ming
a65131e942 I/O port protection: update for windows compatibility.
For windows compatibility,
1) On a port protection violation, simply ignore the request and
   do not return an exception (allow the control method to continue execution.)
2) If only part of the request overlaps a protected port,
   read/write the individual ports that are not protected.

http://bugzilla.kernel.org/show_bug.cgi?id=13036

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-24 00:25:55 -04:00
Len Brown
96f15efcea ACPI: Disable _GTS and _BFS support by default
Executing BIOS code paths not exercised by Windows
tends to get Linux into trouble.

However, if a system does benefit from _GTS or _BFS,
acpi.gts=1 an acpi.bfs=1 are now available to enable them.

http://bugzilla.kernel.org/show_bug.cgi?id=13041

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-17 23:32:20 -04:00
Zhang Rui
82babbb388 ACPI: Revert conflicting workaround for BIOS w/ mangled PRT entries
2f894ef9c8
in Linux-2.6.21 worked around BIOS with mangled _PRT entries:
http://bugzilla.kernel.org/show_bug.cgi?id=6859

d0e184abc5
worked around the same issue via ACPICA, and shipped in 2.6.27.

Unfortunately the two workarounds conflict:
http://bugzilla.kernel.org/show_bug.cgi?id=12270

So revert the Linux specific one.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-11 00:57:21 -04:00
Len Brown
8897c18595 Merge branches 'release', 'APERF', 'ARAT', 'misc', 'kelvin', 'device-lock' and 'bjorn.notify' into release 2009-04-07 18:18:42 -04:00
Len Brown
fdbdc7fc79 ACPICA: delete check for AML access to port 0x81-83
Sony laptops apparently write 4-bytes (rather than 1 byte)
to debug port 0x80, which spews error messages:

Denied AML access to port 0x00000080/4 (DMA1 0x0081-0x0083) [20090320]

http://bugzilla.kernel.org/show_bug.cgi?id=13036

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07 17:33:58 -04:00
Luca Tettamanti
2c03d07ad5 hwmon: Add Asus ATK0110 support
Asus boards have an ACPI interface for interacting with the hwmon (fan,
temperatures, voltages) subsystem; this driver exposes the relevant
information via the standard sysfs interface.

There are two different ACPI interfaces:
- an old one (based on RVLT/RFAN/RTMP)
- a new one (GGRP/GITM)
Both may be present but there a few cases (my board, sigh) where the
new interface is just an empty stub; the driver defaults to the old one
when both are present.
The old interface has received a considerable testing, but I'm still
awaiting confirmation from my tester that the new one is working as
expected (hence the debug code is still enabled).

Currently all the attributes are read-only, though a (partial) control
should be possible with a bit more work.

Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-04-07 15:32:59 +02:00
Len Brown
478c6a43fc Merge branch 'linus' into release
Conflicts:
	arch/x86/kernel/cpu/cpufreq/longhaul.c

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 02:14:15 -04:00
Bob Moore
03ef132b72 ACPICA: Fix index value in package warning message
For predefined method validation. Index value in warning message
could be off by one.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:06 -04:00
Bob Moore
f655630633 ACPICA: FADT: Favor 32-bit FACS and DSDT addresses
If both the 32-bit and 64-bit addresses are non-null, use the
32-bit address. Provides Windows compatibility.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:05 -04:00
Bob Moore
31fbc073a3 ACPICA: FADT: Favor 32-bit register addresses for compatibility
Use the 32-bit register addresses whenever they are non-zero. This
means that the 32-bit addresses are favored over the 64-bit
(GAS) addresses. The 64-bit addresses are only used if the 32-bit
addresses are zero. This change provides compatibility with all
versions of Windows. The worst case that this solves is when both
the 32-bit and 64-bit addresses are non-zero, but only the 32-bit
addresses are actually valid. This appears to happen in some
BIOSes because in this case, Windows uses the 32-bit addresses.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:05 -04:00
Bob Moore
f28ad2c3da ACPICA: Fix PCI configuration space port address range
Microsoft website uses 0xCF8-0xD00. Should be 0xCF8-0xCFF (Two
32-bit registers.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:05 -04:00
Bob Moore
ee6a0fbd0c ACPICA: Condense some protected ports
One entry in the protected port table eliminated. Added extra
comments to describe each table entry.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:05 -04:00
Bob Moore
91a56e631f ACPICA: Remove unused code, no functional change
Removed unused code for dump of args and locals. General cleanup
and splitting of long lines.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:04 -04:00
Lin Ming
c3dd25f4c1 ACPICA: Clear PM register write-only bits on reading
Affects PM1 Control register only. When reading the register, zero
the write-only bits as per the ACPI spec.  ACPICA BZ 443. Lin Ming.

http://www.acpica.org/bugzilla/show_bug.cgi?id=443

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:03 -04:00
Bob Moore
f9ca058430 ACPICA: Remove obsolete acpi_os_validate_address interface
This interface is no longer necessary. Requests should be validated
on a per-field basis, not on the entire operation region.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:03 -04:00
Bob Moore
7f07190390 ACPICA: New: I/O port protection
Protect certain I/O ports from reads/writes. Provides MS
compatibility. New module, hwvalid.c

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:03 -04:00
Bob Moore
20869dcfde ACPICA: Preserve all PM control reserved and ignored bits
As per the ACPI specification, preserve (read/modify/write) all
bits that are defined as either reserved or ignored (PM control
control registers only.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:03 -04:00
Bob Moore
8636f8d257 ACPICA: Change handling of PM1 Status register ignored bit
Ignored bits must be preserved according to the ACPI spec.
Usually this means a read/modify/write when writing to the
register.  However, for status registers, writing a one means
clear the event.  Writing a zero means preserve the event (do not
clear.) This behavior is clarified in the ACPI 4.0 spec, and the
ACPICA code now simply always writes a zero to the ignored bit.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:03 -04:00
Bob Moore
8a335a2331 ACPICA: Fix AcpiWalkNamespace race condition with table unload
Added a reader/writer locking mechanism to allow multiple
concurrent namespace walks (readers), but a dynamic table unload
will have exclusive access to the namespace. This fixes a problem
where a table unload could delete the portion of the namespace that
is currently being examined by a walk.  Adds a new file, utlock.c
that implements the reader/writer lock mechanism. ACPICA BZ 749.

http://www.acpica.org/bugzilla/show_bug.cgi?id=749

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:02 -04:00
Bob Moore
aab61b676a ACPICA: FADT: Fix extraneous length mismatch warning
Incorrect register length mismatch between the 32 and 64 bit
registers in some cases. Code was was checking the wrong pointer
for non-zero, should be looking at the address within the GAS
structure.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27 12:11:02 -04:00