Various dodgy firmware might give us nodes and/or properties in the device
tree with conflicting names. That's generally ok, except for when we export
the device tree via /proc, so check when we're creating the proc device tree
and munge names accordingly.
Tested on a faked device tree with kexec, would be good if someone with
actual bogus firmware could try it, but just for completeness.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Adding bd_claim_by_kobject() function which takes kobject as additional
signature of holder device and creates sysfs symlinks between holder device
and claimed device. bd_release_from_kobject() is a counterpart of
bd_claim_by_kobject.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove all the CONFIG_SYSFS stuff. That's supposed to all be implemented up
in header files.
Yes, the CONFIG_SYSFS=n data structures will be a little larger than
necessary, but that's a tradeoff we can decide to make.
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Creating "slaves" and "holders" directories in /sys/block/<disk> and
creating "holders" directory under /sys/block/<disk>/<partition>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We can now make some code static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
.. it makes some of the code nicer.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
These were an unnecessary wart. Also only have one 'DefineSimpleCache..'
instead of two.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Current svc_expkey holds a pointer to the svc_export structure, so updates to
that structure have to be in-place, which is a wart on the whole cache
infrastruct. So we break that linkage and just do a second lookup.
If this became a performance issue, it would be possible to put a direct link
back in which was only used conditionally. i.e. when an object is replaced
in the cache, we set a flag in the old object. When dereferencing the link
from svc_expkey, if the flag is set, we drop the reference and do a fresh
lookup.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The 'auth_domain's are simply handles on internal data structures. They do
not cache information from user-space, and forcing them into the mold of a
'cache' misrepresents their true nature and causes confusion.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix accidental underflow of the atomic counter.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This functionality is also need for operation of autofs v5 direct mounts.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We have to have a valid sbi here, or we'd have oopsed already. (There's a
dereference of sbi->catatonic a few lines above)
Coverity #740
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch define a new autofs packet for autofs v5 and updates the waitq.c
functions to handle the additional packet type.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds expire logic for autofs direct mounts.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds a follow_link inode method for the root of an autofs direct
mount trigger. It also adds the corresponding mount options and updates the
show_mount method.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In order to be able to trigger a mount using the follow_link inode method the
nameidata struct that is passed in needs to have the vfsmount of the autofs
trigger not its parent.
During a path walk if an autofs trigger is mounted on a dentry, when the
follow_link method is called, the nameidata struct contains the vfsmount and
mountpoint dentry of the parent mount while the dentry that is passed in is
the root of the autofs trigger mount. I believe it is impossible to get the
vfsmount of the trigger mount, within the follow_link method, when only the
parent vfsmount and the root dentry of the trigger mount are known.
This patch updates the nameidata struct on entry to __do_follow_link if it
detects that it is out of date. It moves the path_to_nameidata to above
__do_follow_link to facilitate calling it from there. The dput_path is moved
as well as that seemed sensible. No changes are made to these two functions.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change the functions may_umount and may_umount_tree to boolean functions to
aid code readability.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rename the function simple_empty_nolock to __simple_empty in line with kernel
naming conventions.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Whitespace and formating changes to waitq code.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add show_options method to display autofs4 mount options in the proc
filesystem.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the update of i_atime from autofs4 in favour of having VFS update it.
i_atime is never used for expire in autofs4.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alter the expire semantics that define how "busyness" is determined.
Currently a last_used counter is updated on every revalidate from processes
other than the mount owner process group.
This patch changes that so that an expire candidate is busy only if it has a
reference count greater than the expected minimum, such as when there is an
open file or working directory in use.
This method is the only way that busyness can be established for direct mounts
within the new implementation. For consistency the expire semantic is made
the same for all mounts.
A side effect of the patch is that mounts which remain mounted unessessarily
in the presence of some GUI programs that scan the filesystem should now
expire.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix the case where an expire returns busy on a tree mount when it is in fact
not busy. This case was overlooked when the patch to prevent the expiring
away of "scaffolding" directories for tree mounts was applied.
The problem arises when a tree of mounts is a member of a map with other keys.
The current logic will not expire the tree if any other mount in the map is
busy. The solution is to maintain a "minimum" use count for each autofs
dentry and compare this to the actual dentry usage count during expire.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Simplify the expire tree traversal code by using a function from namespace.c
to calculate the next entry in the top down tree traversals carried out during
the expire operation.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change the names of the boolean functions autofs4_check_mount and
autofs4_check_tree to autofs4_mount_busy and autofs4_tree_busy respectively
and alters their return codes to suit in order to aid code readabilty.
A couple of white space cleanups are included as well.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Addresse a problem where stale dentrys stop mounts from happening.
When a mount point directory is pre-created and a non-existent entry within it
is requested a dentry ends up being created within the mount point directory
which stops future mounts. The problem is solved by ignoring negative,
unhashed dentrys in the mount point d_subdirs list.
Additionally the apparent cacheing of -ENOENT returns from requests is
removed. The test on d_time is a tautology and d_time is not initialised and
has an unexpected value. In short it doesn't do what it's meant to.
The cacheing of failed requests to the daemon is important and will be
followed up later.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change readdir routines to use the cursor based routines in libfs.c. This
removes reliance on old readdir code from 2.4 and should improve efficiency of
readdir in autofs4.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Whitespace and formating changes to lookup code.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Noted by Oleg Drokin:
We initialized an extra slot of struct kstatfs.spare, sometimes
causing stack corruption.
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Oleg Drokin <green@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
drivers/char/ftape/lowlevel/fdc-io.c: Correct a comment
Kconfig help: MTD_JEDECPROBE already supports Intel
Remove ugly debugging stuff
do_mounts.c: Minor ROOT_DEV comment cleanup
BUG_ON() Conversion in drivers/s390/block/dasd_devmap.c
BUG_ON() Conversion in mm/mempool.c
BUG_ON() Conversion in mm/memory.c
BUG_ON() Conversion in kernel/fork.c
BUG_ON() Conversion in ipc/sem.c
BUG_ON() Conversion in fs/ext2/
BUG_ON() Conversion in fs/hfs/
BUG_ON() Conversion in fs/dcache.c
BUG_ON() Conversion in fs/buffer.c
BUG_ON() Conversion in input/serio/hp_sdc_mlc.c
BUG_ON() Conversion in md/dm-table.c
BUG_ON() Conversion in md/dm-path-selector.c
BUG_ON() Conversion in drivers/isdn
BUG_ON() Conversion in drivers/char
BUG_ON() Conversion in drivers/mtd/
Now the only user who are using generic_ffs() is ntfs filesystem. This patch
isolates generic_ffs() as ntfs_ffs() for ntfs.
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Cc: Anton Altaparmakov <aia21@cantab.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The nanosleep cleanup allows to remove the data field of hrtimer. The
callback function can use container_of() to get it's own data. Since the
hrtimer structure is anyway embedded in other structures, this adds no
overhead.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the it_real_value from /proc/*/stat, during 1.2.x was the last time it
returned useful data (as it was directly maintained by the scheduler), now
it's only a waste of time to calculate it. Return 0 instead.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is no valid reason why we can't support "nobh" option for filesystems
with blocksize != PAGESIZE.
This patch lets them use "nobh" option for writeback mode for blocksize <
pagesize.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao recently added multi-block allocation support for ext3,
currently used only by DIO. I added support to map multiple blocks for
mpage_readpages(). This patch add support for ext3_get_block() to deal
with multi-block mapping. Basically it renames ext3_direct_io_get_blocks()
as ext3_get_block().
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Clean up a few little layout things and comments.
- Add a WARN_ON to a case which I was wondering about.
- Tune up some inlines.
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Now that get_block() can handle mapping multiple disk blocks, no need to have
->get_blocks(). This patch removes fs specific ->get_blocks() added for DIO
and makes it users use get_block() instead.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch changes mpage_readpages() and get_block() to get the disk mapping
information for multiple blocks at the same time.
b_size represents the amount of disk mapping that needs to mapped. On the
successful get_block() b_size indicates the amount of disk mapping thats
actually mapped. Only the filesystems who care to use this information and
provide multiple disk blocks at a time can choose to do so.
No changes are needed for the filesystems who wants to ignore this.
[akpm@osdl.org: cleanups]
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pass amount of disk needs to be mapped to get_block(). This way one can
modify the fs ->get_block() functions to map multiple blocks at the same time.
[akpm@osdl.org: performance tweak]
[akpm@osdl.org: remove unneeded assignments]
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Increase the size of the buffer_head b_size field (only) for 64 bit platforms.
Update some old and moldy comments in and around the structure as well.
The b_size increase allows us to perform larger mappings and allocations for
large I/O requests from userspace, which tie in with other changes allowing
the get_block_t() interface to map multiple blocks at once.
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Optimize the block reservation and the multiple block allocation: with the
knowledge of the total number of blocks ahead, set or adjust the reservation
window size properly (based on the number of blocks needed) before block
allocation happens: if there isn't any reservation yet, make sure the
reservation window equals to or greater than the number of blocks needed,
before create an reservation window; if a reservation window is already
exists, try to extends the window size to match the number of blocks to
allocate. This could increase the possibility of completing multiple blocks
allocation in a single request, as blocks are only allocated in the range of
the inode's reservation window.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update accounting information (quota, boundary checks, free blocks number etc)
in ext3_new_blocks().
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change ext3_try_to_allocate() (called via ext3_new_blocks()) to try to
allocate the requested number of blocks on a best effort basis: After
allocated the first block, it will always attempt to allocate the next few(up
to the requested size and not beyond the reservation window) adjacent blocks
at the same time.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add support for multiple block allocation in ext3-get-blocks().
Look up the disk block mapping and count the total number of blocks to
allocate, then pass it to ext3_new_block(), where the real block allocation is
performed. Once multiple blocks are allocated, prepare the branch with those
just allocated blocks info and finally splice the whole branch into the block
mapping tree.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently ext3_get_block() only maps or allocates one block at a time. This
is quite inefficient for sequential IO workload.
I have posted a early implements a simply multiple block map and allocation
with current ext3. The basic idea is allocating the 1st block in the existing
way, and attempting to allocate the next adjacent blocks on a best effort
basis. More description about the implementation could be found here:
http://marc.theaimsgroup.com/?l=ext2-devel&m=112162230003522&w=2
The following the latest version of the patch: break the original patch into 5
patches, re-worked some logicals, and fixed some bugs. The break ups are:
[patch 1] Adding map multiple blocks at a time in ext3_get_blocks()
[patch 2] Extend ext3_get_blocks() to support multiple block allocation
[patch 3] Implement multiple block allocation in ext3-try-to-allocate
(called via ext3_new_block()).
[patch 4] Proper accounting updates in ext3_new_blocks()
[patch 5] Adjust reservation window size properly (by the given number
of blocks to allocate) before block allocation to increase the
possibility of allocating multiple blocks in a single call.
Tests done so far includes fsx,tiobench and dbench. The following numbers
collected from Direct IO tests (1G file creation/read) shows the system time
have been greatly reduced (more than 50% on my 8 cpu system) with the patches.
1G file DIO write:
2.6.15 2.6.15+patches
real 0m31.275s 0m31.161s
user 0m0.000s 0m0.000s
sys 0m3.384s 0m0.564s
1G file DIO read:
2.6.15 2.6.15+patches
real 0m30.733s 0m30.624s
user 0m0.000s 0m0.004s
sys 0m0.748s 0m0.380s
Some previous test we did on buffered IO with using multiple blocks allocation
and delayed allocation shows noticeable improvement on throughput and system
time.
This patch:
Add support of mapping multiple blocks in one call.
This is useful for DIO reads and re-writes (where blocks are already
allocated), also is in line with Christoph's proposal of using getblocks() in
mpage_readpage() or mpage_readpages().
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Modify well over a dozen mempool users to call mempool_create_slab_pool()
rather than calling mempool_create() with extra arguments, saving about 30
lines of code and increasing readability.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch changes several mempool users, all of which are basically just
wrappers around kmalloc(), to use the common mempool_kmalloc/kfree, rather
than their own wrapper function, removing a bunch of duplicated code.
Signed-off-by: Matthew Dobson <colpatch@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update the NFSv4 server to use the new posix_lock_file_conf() interface.
Remove unnecessary (and race-prone) posix_test_file() calls.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Lockd and the NFSv4 server both exercise a race condition where
posix_test_lock() is called either before or after posix_lock_file() to
deal with a denied lock request due to a conflicting lock.
Remove the race condition for the NFSv4 server by adding a new conflicting
lock parameter to __posix_lock_file() , changing the name to
__posix_lock_file_conf().
Keep posix_lock_file() interface, add posix_lock_conf() interface, both
call __posix_lock_file_conf().
[akpm@osdl.org: Put the EXPORT_SYMBOL() where it belongs]
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
BUG instead of handling a case that should never happen.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I discovered on oprofile hunting on a SMP platform that dentry lookups were
slowed down because d_hash_mask, d_hash_shift and dentry_hashtable were in
a cache line that contained inodes_stat. So each time inodes_stats is
changed by a cpu, other cpus have to refill their cache line.
This patch moves some variables to the __read_mostly section, in order to
avoid false sharing. RCU dentry lookups can go full speed.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The return value of this function is never used, so let's be honest and
declare it as void.
Some places where invalidatepage returned 0, I have inserted comments
suggesting a BUG_ON.
[akpm@osdl.org: JBD BUG fix]
[akpm@osdl.org: rework for git-nfs]
[akpm@osdl.org: don't go BUG in block_invalidate_page()]
Signed-off-by: Neil Brown <neilb@suse.de>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The only user ignores the return value, and the only instanace
(block_sync_page) always returns 0...
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Cc: Robert Love <rml@tech9.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It has been discovered that the remove_proc_entry has a race in the removing
of entries in the proc file system that are siblings. There's no protection
around the traversing and removing of elements that belong in the same
subdirectory.
This subdirectory list is protected in other areas by the BKL. So the BKL was
at first used to protect this area too, but unfortunately, remove_proc_entry
may be called with spinlocks held. The BKL may schedule, so this was not a
solution.
The final solution was to add a new global spin lock to protect this list,
called proc_subdir_lock. This lock now protects the list in
remove_proc_entry, and I also went around looking for other areas that this
list is modified and added this protection there too. Care must be taken
since these locations call several functions that may also schedule.
Since I don't see any location that these functions that modify the
subdirectory list are called by interrupts, the irqsave/restore versions of
the spin lock was _not_ used.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner and can better optimized away
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner and can better optimized away
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
* 'audit.b3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: (22 commits)
[PATCH] fix audit_init failure path
[PATCH] EXPORT_SYMBOL patch for audit_log, audit_log_start, audit_log_end and audit_format
[PATCH] sem2mutex: audit_netlink_sem
[PATCH] simplify audit_free() locking
[PATCH] Fix audit operators
[PATCH] promiscuous mode
[PATCH] Add tty to syscall audit records
[PATCH] add/remove rule update
[PATCH] audit string fields interface + consumer
[PATCH] SE Linux audit events
[PATCH] Minor cosmetic cleanups to the code moved into auditfilter.c
[PATCH] Fix audit record filtering with !CONFIG_AUDITSYSCALL
[PATCH] Fix IA64 success/failure indication in syscall auditing.
[PATCH] Miscellaneous bug and warning fixes
[PATCH] Capture selinux subject/object context information.
[PATCH] Exclude messages by message type
[PATCH] Collect more inode information during syscall processing.
[PATCH] Pass dentry, not just name, in fsnotify creation hooks.
[PATCH] Define new range of userspace messages.
[PATCH] Filter rule comparators
...
Fixed trivial conflict in security/selinux/hooks.c
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (103 commits)
SUNRPC,RPCSEC_GSS: spkm3--fix config dependencies
SUNRPC,RPCSEC_GSS: spkm3: import contexts using NID_cast5_cbc
LOCKD: Make nlmsvc_traverse_shares return void
LOCKD: nlmsvc_traverse_blocks return is unused
SUNRPC,RPCSEC_GSS: fix krb5 sequence numbers.
NFSv4: Dont list system.nfs4_acl for filesystems that don't support it.
SUNRPC,RPCSEC_GSS: remove unnecessary kmalloc of a checksum
SUNRPC: Ensure rpc_call_async() always calls tk_ops->rpc_release()
SUNRPC: Fix memory barriers for req->rq_received
NFS: Fix a race in nfs_sync_inode()
NFS: Clean up nfs_flush_list()
NFS: Fix a race with PG_private and nfs_release_page()
NFSv4: Ensure the callback daemon flushes signals
SUNRPC: Fix a 'Busy inodes' error in rpc_pipefs
NFS, NLM: Allow blocking locks to respect signals
NFS: Make nfs_fhget() return appropriate error values
NFSv4: Fix an oops in nfs4_fill_super
lockd: blocks should hold a reference to the nlm_file
NFSv4: SETCLIENTID_CONFIRM should handle NFS4ERR_DELAY/NFS4ERR_RESOURCE
NFSv4: Send the delegation stateid for SETATTR calls
...
8MB is not really very random, use 1GB (or more with larger page sizes)
instead.
Also use the low bits of the random generator output now instead of
throwing them away.
Only enabled on x86-64 right now. Other architectures need to add
a suitable STACK_RND_MASK
Cc: mingo@elte.hu
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2:
ocfs2: finally remove MLF* macros
ocfs2: don't use MLF* in the file system
ocfs2: don't use MLF* in dlm/ files
ocfs2: don't use MLF* in cluster/ files
[PATCH] ocfs2: dlm recovery fixes
[PATCH] ocfs2: fix hang in dlm lock resource mastery
ocfs2: use __attribute__ format
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (21 commits)
BUG_ON() Conversion in drivers/video/
BUG_ON() Conversion in drivers/parisc/
BUG_ON() Conversion in drivers/block/
BUG_ON() Conversion in sound/sparc/cs4231.c
BUG_ON() Conversion in drivers/s390/block/dasd.c
BUG_ON() Conversion in lib/swiotlb.c
BUG_ON() Conversion in kernel/cpu.c
BUG_ON() Conversion in ipc/msg.c
BUG_ON() Conversion in block/elevator.c
BUG_ON() Conversion in fs/coda/
BUG_ON() Conversion in fs/binfmt_elf_fdpic.c
BUG_ON() Conversion in input/serio/hil_mlc.c
BUG_ON() Conversion in md/dm-hw-handler.c
BUG_ON() Conversion in md/bitmap.c
The comment describing how MS_ASYNC works in msync.c is confusing
rcu: undeclared variable used in documentation
fix typos "wich" -> "which"
typo patch for fs/ufs/super.c
Fix simple typos
tabify drivers/char/Makefile
...
In binfmt_flat.c, the flat binary loader should check file descriptor table
and install the fd on the file.
Convert the function to single-exit and fix this bug.
Signed-off-by: "Luke Yang" <luke.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
nr_segs is unsigned long and thus cannot be negative. We checked against 0
few lines before.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Local variable i is unsigned int and thus cannot be negative.
(akpm: unsigneds shouldn't be called `i'. This value cannot possibly be
negative anyway).
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is a bug in direct-io on propagating write error up to the higher I/O
layer. When performing an async ODIRECT write to a block device, if a
device error occurred (like media error or disk is pulled), the error code
is only propagated from device driver to the DIO layer. The error code
stops at finished_one_bio(). The aysnc write, however, is supposedly have
a corresponding AIO event with appropriate return code (in this case -EIO).
Application which waits on the async write event, will hang forever since
such AIO event is lost forever (if such app did not use the timeout option
in io_getevents call. Regardless, an AIO event is lost).
The discovery of above bug leads to another discovery of potential race
window with dio->result. The fundamental problem is that dio->result is
overloaded with dual use: an indicator of fall back path for partial dio
write, and an error indicator used in the I/O completion path. In the
event of device error, the setting of -EIO to dio->result clashes with
value used to track partial write that activates the fall back path.
It was also pointed out that it is impossible to use dio->result to track
partial write and at the same time to track error returned from device
driver. Because direct_io_work can only determines whether it is a partial
write at the end of io submission and in mid stream of those io submission,
a return code could be coming back from the driver. Thus messing up all
the subsequent logic.
Proposed fix is to separating out error code returned by the IO completion
path from partial IO submit tracking. A new variable is added to dio
structure specifically to track io error returned in the completion path.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Acked-by: Zach Brown <zach.brown@oracle.com>
Acked-by: Suparna Bhattacharya <suparna@in.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As Pekka Enberg pointed out, with the if still following the else, you can
still get a null uid written to the disk if you specify a default uid= without
uid=forget. In other words, if the desktop user is uid=1000 and the mount
option uid=1000 is given ( which is done on ubuntu automatically and probably
other distributions that use hal ), then if any other user besides uid 1000
owns a file then a 0 will be written to the media as the owning uid instead.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Correct some error handling on the compat version of the nfsservctl()
system. It was detecting errors while copying in the arguments from user
space, but then attempting to use the arguments anyway. This didn't seem
so good.
Signed-off-by: Peter Staubach <staubach@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If I mount ext2 "rw", I want it to say "rw", not "rw,nogrpid".
I caught this writing an automated regression test script for the busybox
mount command. The symptom is
/dev/loop0 on /images/ext2.dir type ext2 (rw,nogrpid)
instead of:
/dev/loop0 on /images/ext2.dir type ext2 (rw)
The behavior was introduced by git commit
8fc2751beb.
Signed-off-by: Rob Landley <rob@landley.net>
Cc: Mark Bellon <mbellon@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
As prepare_write, commit_write and readpage are allowed to return
AOP_TRUNCATE_PAGE, page_symlink should respond to them.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
fs/reiserfs/item_ops.c: In function 'indirect_print_item':
fs/reiserfs/item_ops.c:278: warning: 'num' may be used uninitialized in this function
(akpm: this is probably just gcc being dumb)
Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.fr>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The Coverity checker wasn't happy seeing a size_t compared with -ENODATA
and -ENOSYS.
Since the only place where size is set is through the result of
reiserfs_xattr_get() which is an int, we could simply make size an int.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Cc: Hans Reiser <reiser@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When EXT3FS_DEBUG is #define-d, the compile breaks due to #include file
issues.
Signed-off-by: Kirk True <kernel@kirkandsheila.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch reduces scheduling latency in shrink_dcache_sb() noticed during
remounting of big partitions with many cached dentries. The same latency
fix was applied to select_parent() long ago.
Signed-off-by: Denis Lunev <den@sw.ru>
Signed-off-by: Pavel Emelianov <xemul@sw.ru>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In here, I think the following order is more cache-friendly.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
freeze_bdev() uses a fsync_super() without sync_blockdev(). This patch
makes __fsync_super() and shares it.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Believe it or not, but in fs/minix/*, the oldest filesystem in the kernel,
something still can be fixed:
printk("new_inode: bit already set");
"\n" is missing!
While at it, I also removed periods from the end of error messages and made
capitalization uniform. Also s/i-node/inode/, s/printk (/printk(/
Signed-ff-by: Denis Vlasenko <vda@ilport.com.ua>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement the half-closed devices notifiation, by adding a new POLLRDHUP
(and its alias EPOLLRDHUP) bit to the existing poll/select sets. Since the
existing POLLHUP handling, that does not report correctly half-closed
devices, was feared to be changed, this implementation leaves the current
POLLHUP reporting unchanged and simply add a new bit that is set in the few
places where it makes sense. The same thing was discussed and conceptually
agreed quite some time ago:
http://lkml.org/lkml/2003/7/12/116
Since this new event bit is added to the existing Linux poll infrastruture,
even the existing poll/select system calls will be able to use it. As far
as the existing POLLHUP handling, the patch leaves it as is. The
pollrdhup-2.6.16.rc5-0.10.diff defines the POLLRDHUP for all the existing
archs and sets the bit in the six relevant files. The other attached diff
is the simple change required to sys/epoll.h to add the EPOLLRDHUP
definition.
There is "a stupid program" to test POLLRDHUP delivery here:
http://www.xmailserver.org/pollrdhup-test.c
It tests poll(2), but since the delivery is same epoll(2) will work equally.
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When SMBFS_DEBUG_VERBOSE is #define-d, the compile breaks:
fs/smbfs/inode.c:217: error: aggregate value used where an integer was expected
This is a simple matter of using the .tv_sec attribute of struct time_spec.
Signed-off-by: Kirk True <kernel@kirkandsheila.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There were a number of conflicting naming schemes used in the v9fs project.
The directory was fs/9p, but MAINTAINERS and Documentation referred to
v9fs. The module name itself was 9p2000, and the file system type was 9P.
This patch attempts to clean that up, changing all references to 9p in
order to match the directory name. We'll also start using 9p instead of
v9fs as our patch prefix.
There is also a minor consistency cleanup in the options changing the name
option to uname in order to more closely match the Plan 9 options.
Signed-off-by: Eric Van Hensbergevan <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update license boilerplate to specify GPLv2 and remove the (at your option
clause). This change was agreed to by all the copyright holders (approvals
can be found on v9fs-developer mailing list).
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
__getname, which in turn will call kmem_cache_alloc, may return NULL.
Coverity bug #977
Signed-off-by: Eugene Teo <eugene.teo@eugeneteo.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement a new way of creating special files. Instead of Tcreate+Twstat,
add one more field to Tcreate that contains special file description.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The code talks about these things called tids, which I eventually figured
out are tags.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Here is a new trans_fd.c that replaces the current trans_fd.c and
trans_sock.c.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use the new balance_dirty_pages_ratelimited_nr in reiserfs "largeio" file
write.
Signed-off-by: Hans Reiser <reiser@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clean up several places where gcc issues warnings when -W is specified.
Thanks to Neil for finding that.
Signed-off-by: Vladimir V. Saveliev <vs@namesys.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Hans Reiser <reiser@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Previous inotify work avoidance is good when inotify is completely unused,
but it breaks down if even a single watch is in place anywhere in the
system. Robin Holt notices that udev is one such culprit - it slows down a
512-thread application on a 512 CPU system from 6 seconds to 22 minutes.
Solve this by adding a flag in the dentry that tells inotify whether or not
its parent inode has a watch on it. Event queueing to parent will skip
taking locks if this flag is cleared. Setting and clearing of this flag on
all child dentries versus event delivery: this is no in terms of race
cases, and that was shown to be equivalent to always performing the check.
The essential behaviour is that activity occuring _after_ a watch has been
added and _before_ it has been removed, will generate events.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Robert Love <rml@novell.com>
Cc: John McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I think it would be nice to put an usage warning in header of
lookup_instantiate_filp() to indicate it is unsafe to use it on anything
but regular files (even that is potentially unsafe, but there your ->open()
is usually in your hands anyway), so that others won't fall into the same
trap I did.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Introduce FMODE_EXEC file flag, to indicate that file is being opened for
execution. This is useful for distributed filesystems to maintain
consistent behavior for returning ETXTBUSY when opening for write and
execution happens on different nodes.
akpm:
Needed by Lustre at present. I assume their objective to to work towards
being able to install Lustre on an unmodified distro kernel, which seems
sane. It should have zero runtime cost.
Trond and Chuck indicate that NFS4 can probably use this too, for the same
thing.
Steven says it's also on the GFS todo list.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Chuck Lever <cel@citi.umich.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When an error occurs in reiserfs_file_write before any data is written, and
O_SYNC is set, the return code of generic_osync_write will overwrite the
error code, losing it.
This patch ensures that generic_osync_inode() doesn't run under an error
condition, losing the error. This duplicates the logic from
generic_file_buffered_write().
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Alexander Zarochentsev <zam@namesys.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reiserfs does not handle transaction ID overflow correctly. Transaction ID
== 0 causes reiserfs to crash. The patch fixes all places where the
transaction ID is incremented.
Signed-off-by: Alexander Zarochentsev <zam@namesys.com>
Signed-off-by: Hans Reiser <reiser@namesys.com>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes a bug in reiserfs truncate. A transaction might overflow
when truncating long highly fragmented file. The fix is to split
truncation into several transactions to avoid overflowing.
Signed-off-by: Vladimir V. Saveliev <vs@namesys.com>
Cc; Charles McColgan <cm@chuck.net>
Cc: Alexander Zarochentsev <zam@namesys.com>
Cc: Hans Reiser <reiser@namesys.com>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There's no reason for iprune_mutex being global.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It seems there is error check missing in open_namei for errors returned
through intent.open.file (from lookup_instantiate_filp).
If there is plain open performed, then such a check done inside
__path_lookup_intent_open called from path_lookup_open(), but when the open
is performed with O_CREAT flag set, then __path_lookup_intent_open is only
called with LOOKUP_PARENT set where no file opening can occur yet.
Later on lookup_hash is called where exact opening might take place and
intent.open.file may be filled. If it is filled with error value of some
sort, then we get kernel attempting to dereference this error value as
address (and corresponding oops) in nameidata_to_filp() called from
filp_open().
While this is relatively simple to workaround in ->lookup() method by just
checking lookup_instantiate_filp() return value and returning error as
needed, this is not so easy in ->d_revalidate(), where we can only return
"yes, dentry is valid" or "no, dentry is invalid, perform full lookup
again", and just returning 0 on error would cause extra lookup (with
potential extra costly RPCs).
So in short, I believe that there should be no difference in error handling
for opening a file and creating a file in open_namei() and propose this
simple patch as a solution.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The kjournald timer is currently on the kernel thread's stack and the journal
structure points at it. Save a pointer hop by moving the timer into the
journal structure.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The attached patch optimises d_find_alias() to only take the spinlock if
there's anything in the the inode's alias list. If there isn't, it returns
NULL immediately.
With respect to the superblock sharing patch, this should reduce by one the
number of times the dcache_lock is taken by nfs_lookup() for ordinary
directory lookups.
Only in the case where there's already a dentry for particular directory inode
(such as might happen when another mountpoint is rooted at that dentry) will
the lock then be taken the extra time.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
when starting lock mastery (excepting the recovery lock) wait on any nodes
needing recovery. fix one instance where lock resources were left attached
to the recovery list after recovery completed. ensure that the node_down
code is run uniformly regardless of which node found the dead node first.
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
fixes hangs in lock mastery related to refcounting on the mle structure
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Use the "format" attribute on ocfs2_error() and ocfs2_abort() so that the
compiler will warn when we get calls to those functions wrong.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner and can better optimized away
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
In filesystems with the meta block group flag on, ext3_bg_num_gdb() fails
to report the correct number of blocks used to store the group descriptor
backups in a given group. It happens because meta_bg follows a different
logic from the original ext3 backup placement in groups multiples of 3, 5
and 7.
Signed-off-by: Glauber de Oliveira Costa <glommer@br.ibm.com>
Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: Alex Tomas <alex@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If we don't want sys_newfstatat because __ARCH_WANT_STAT64 is defined, then
we certainly don't want compat_sys_newfstatat either.
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pull the guts out of do_fsync() - we can use it elsewhere.
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We need set_page_dirty() to return true if it actually transitioned the page
from a clean to dirty state. This wasn't right in a couple of places. Do a
kernel-wide audit, fix things up.
This leaves open the possibility of returning a negative errno from
set_page_dirty() sometime in the future. But we don't do that at present.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Instead of using for_each_cpu(i), we can use for_each_online_cpu(i).
When a CPU goes offline (ie removed from online map), it might have a non
null bh_accounting.nr, so this patch adds a transfer of this counter to an
online CPU counter.
We already have a hotcpu_notifier, (function buffer_cpu_notify()), where we
can do this bh_accounting.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Under I/O load it may take up to a dozen seconds to read all group
descriptors. This is what ext3_statfs() does. At the same time, we already
maintain global numbers of free inodes/blocks. Why don't we use them instead
of group reading and summing?
Cc: Ravikiran G Thirumalai <kiran@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove unused debugging macros from isofs. The referred debug functions do
not exist in the kernel.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change the kmem_cache_create calls for certain slab caches to support cpuset
memory spreading.
See the previous patches, cpuset_mem_spread, for an explanation of cpuset
memory spreading, and cpuset_mem_spread_slab_cache for the slab cache support
for memory spreading.
The slab caches marked for now are: dentry_cache, inode_cache, some xfs slab
caches, and buffer_head. This list may change over time. In particular,
other file system types that are used extensively on large NUMA systems may
want to allow for spreading their directory and inode slab cache entries.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Rewrap the overly long source code lines resulting from the previous
patch's addition of the slab cache flag SLAB_MEM_SPREAD. This patch
contains only formatting changes, and no function change.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD
memory spreading.
If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's
in a cpuset with the 'memory_spread_slab' option enabled goes to allocate
from such a slab cache, the allocations are spread evenly over all the
memory nodes (task->mems_allowed) allowed to that task, instead of favoring
allocation on the node local to the current cpu.
The following inode and similar caches are marked SLAB_MEM_SPREAD:
file cache
==== =====
fs/adfs/super.c adfs_inode_cache
fs/affs/super.c affs_inode_cache
fs/befs/linuxvfs.c befs_inode_cache
fs/bfs/inode.c bfs_inode_cache
fs/block_dev.c bdev_cache
fs/cifs/cifsfs.c cifs_inode_cache
fs/coda/inode.c coda_inode_cache
fs/dquot.c dquot
fs/efs/super.c efs_inode_cache
fs/ext2/super.c ext2_inode_cache
fs/ext2/xattr.c (fs/mbcache.c) ext2_xattr
fs/ext3/super.c ext3_inode_cache
fs/ext3/xattr.c (fs/mbcache.c) ext3_xattr
fs/fat/cache.c fat_cache
fs/fat/inode.c fat_inode_cache
fs/freevxfs/vxfs_super.c vxfs_inode
fs/hpfs/super.c hpfs_inode_cache
fs/isofs/inode.c isofs_inode_cache
fs/jffs/inode-v23.c jffs_fm
fs/jffs2/super.c jffs2_i
fs/jfs/super.c jfs_ip
fs/minix/inode.c minix_inode_cache
fs/ncpfs/inode.c ncp_inode_cache
fs/nfs/direct.c nfs_direct_cache
fs/nfs/inode.c nfs_inode_cache
fs/ntfs/super.c ntfs_big_inode_cache_name
fs/ntfs/super.c ntfs_inode_cache
fs/ocfs2/dlm/dlmfs.c dlmfs_inode_cache
fs/ocfs2/super.c ocfs2_inode_cache
fs/proc/inode.c proc_inode_cache
fs/qnx4/inode.c qnx4_inode_cache
fs/reiserfs/super.c reiser_inode_cache
fs/romfs/inode.c romfs_inode_cache
fs/smbfs/inode.c smb_inode_cache
fs/sysv/inode.c sysv_inode_cache
fs/udf/super.c udf_inode_cache
fs/ufs/super.c ufs_inode_cache
net/socket.c sock_inode_cache
net/sunrpc/rpc_pipe.c rpc_inode_cache
The choice of which slab caches to so mark was quite simple. I marked
those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache,
inode_cache, and buffer_head, which were marked in a previous patch. Even
though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same
potentially large file system i/o related slab caches as we need for memory
spreading.
Given that the rule now becomes "wherever you would have used a
SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use
the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain.
Future file system writers will just copy one of the existing file system
slab cache setups and tend to get it right without thinking.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Introduce a file fs/coda/coda_int.h with proper prototypes for some code.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a proper prototype for ext2_get_parent().
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- mux.c: v9fs_poll_mux() was inline but not static resuling in needless
object size bloat
- mux.c: remove all "inline"s: gcc should know best what to inline
- #if 0 the following unused global functions:
- 9p.c: v9fs_v9fs_t_flush()
- conv.c: v9fs_create_tauth()
- mux.c: v9fs_mux_rpcnb()
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a
duplicate of ARRAY_SIZE. Some trailing whitespaces are also deleted.
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Cc: David Howells <dhowells@redhat.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The meaning of MS_VERBOSE is backwards; if the bit is set, it really means,
"don't be verbose". This is confusing and counter-intuitive.
In addition, there is also no way to set the MS_VERBOSE flag in the
mount(8) program in util-linux, but interesting, it does define options
which would do the right thing if MS_SILENT were defined, which
unfortunately we do not:
#ifdef MS_SILENT
{ "quiet", 0, 0, MS_SILENT }, /* be quiet */
{ "loud", 0, 1, MS_SILENT }, /* print out messages. */
#endif
So the obvious fix is to deprecate the use of MS_VERBOSE and replace it
with MS_SILENT.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6:
NTFS: 2.1.27 - Various bug fixes and cleanups.
NTFS: Semaphore to mutex conversion.
NTFS: Handle the recently introduced -ENAMETOOLONG return value from
NTFS: Add a missing call to flush_dcache_mft_record_page() in
NTFS: Fix a bug in fs/ntfs/inode.c::ntfs_read_locked_index_inode() where we
NTFS: Improve comments on file attribute flags in fs/ntfs/layout.h.
NTFS: Limit name length in fs/ntfs/unistr.c::ntfs_nlstoucs() to maximum
NTFS: Remove all the make_bad_inode() calls. This should only be called
NTFS: Add support for sparse files which have a compression unit of 0.
NTFS: Fix comparison of $MFT and $MFTMirr to not bail out when there are
NTFS: Use buffer_migrate_page() for the ->migratepage function of all ntfs
NTFS: Fix a buggette in an "should be impossible" case handling where we
NTFS: Fix an (innocent) off-by-one error in the runlist code.
NTFS: Fix two compiler warnings on Alpha. Thanks to Andrew Morton for
* 'blktrace' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] Block queue IO tracing support (blktrace) as of 2006-03-23
[PATCH] relay: consolidate sendfile() and read() code
[PATCH] relay: add sendfile() support
[PATCH] relay: migrate from relayfs to a generic relay API
* git://oss.sgi.com:8090/oss/git/xfs-2.6: (71 commits)
[XFS] Sync up one/two other minor changes missed in previous merges.
[XFS] Reenable the noikeep (delete inode cluster space) option by default.
[XFS] Check that a page has dirty buffers before finding it acceptable for
[XFS] Fixup naming inconsistencies found by Pekka Enberg and one from Jan
[XFS] Explain the race closed by the addition of vn_iowait() to the start
[XFS] Fixing the error caused by the conflict between DIO Write's
[XFS] Fixing KDB's xrwtrc command, also added the current process id into
[XFS] Fix compiler warning from xfs_file_compat_invis_ioctl prototype.
[XFS] remove bogus INT_GET for u8 variables in xfs_dir_leaf.c
[XFS] endianess annotations for xfs_da_node_hdr_t
[XFS] endianess annotations for xfs_da_node_entry_t
[XFS] store xfs_attr_inactive_list_t in native endian
[XFS] store xfs_attr_sf_sort in native endian
[XFS] endianess annotations for xfs_attr_shortform_t
[XFS] endianess annotations for xfs_attr_leaf_name_remote_t
[XFS] endianess annotations for xfs_attr_leaf_name_local_t
[XFS] endianess annotations for xfs_attr_leaf_entry_t
[XFS] endianess annotations for xfs_attr_leaf_hdr_t
[XFS] remove bogus INT_GET on u8 variables in xfs_dir2_block.c
[XFS] endianess annotations for xfs_da_blkinfo_t
...
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
forgot to update a temporary variable so loading index inodes which
have an index allocation attribute failed.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
allowed by NTFS, i.e. 255 Unicode characters, not including the
terminating NULL (which is not stored on disk).
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
The biovec default mempool limit of 256 entries results in over 3MB of RAM
being permanently pinned, even on systems with only 128MB of RAM. Since
mempool tries to allocate from the system pool first, it makes sense to
reduce the size of the mempool fallbacks to a more reasonable limit of 1-5
entries -- enough for the system to be able to make progress even under
load.
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Acked-by: Jens Axboe <axboe@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When we stop allocating percpu memory for not-possible CPUs we must not touch
the percpu data for not-possible CPUs at all. The correct way of doing this
is to test cpu_possible() or to use for_each_cpu().
This patch is a kernel-wide sweep of all instances of NR_CPUS. I found very
few instances of this bug, if any. But the patch converts lots of open-coded
test to use the preferred helper macros.
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Christian Zankel <chris@zankel.net>
Cc: Philippe Elie <phil.el@wanadoo.fr>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eliminate a handful of cache references by keeping current in a register
instead of reloading (helps x86) and avoiding the overhead of a function
call. Inlining eventpoll_init_file() saves 24 bytes. Also reorder file
initialization to make writes occur more sequentially.
Signed-off-by: Benjamin LaHaise <bcrl@linux.intel.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The fat code uses the fat_lock always in a mutex way (taking and releasing
the lock in the same function), the patch below converts it into the new
mutex primitive. Please consider this patch for the code.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
ext3's truncate_sem is always released in the same function it's taken
and it otherwise is a mutex as well..
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: John McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Robert Love <rml@novell.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Convert fs/9p/mux.c from semaphore to mutex.
NOTE: fixed locking bugs in the process - the code was using semaphores
the other way around.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When quota is being turned off we assumed that all the references to dquots
were already dropped. That need not be true as inodes being deleted are
not on superblock's inodes list and hence we need not reach it when
removing quota references from inodes. So invalidate_dquots() has to wait
for all the users of dquots (as quota is already marked as turned off, no
new references can be acquired and so this is bound to happen rather
early). When we do this, we can also remove the iprune_sem locking as it
was protecting us against exactly the same problem when freeing inodes
icache memory.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1) Reduce the size of (struct fdtable) to exactly 64 bytes on 32bits
platforms, lowering kmalloc() allocated space by 50%.
2) Reduce the size of (files_struct), using a special 32 bits (or
64bits) embedded_fd_set, instead of a 1024 bits fd_set for the
close_on_exec_init and open_fds_init fields. This save some ram (248
bytes per task) as most tasks dont open more than 32 files. D-Cache
footprint for such tasks is also reduced to the minimum.
3) Reduce size of allocated fdset. Currently two full pages are
allocated, that is 32768 bits on x86 for example, and way too much. The
minimum is now L1_CACHE_BYTES.
UP and SMP should benefit from this patch, because most tasks will touch
only one cache line when open()/close() stdin/stdout/stderr (0/1/2),
(next_fd, close_on_exec_init, open_fds_init, fd_array[0 .. 2] being in the
same cache line)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus points out that ext3_readdir's readahead only cuts in when
ext3_readdir() is operating at the very start of the directory. So for large
directories we end up performing no readahead at all and we suck.
So take it all out and use the core VM's page_cache_readahead(). This means
that ext3 directory reads will use all of readahead's dynamic sizing goop.
Note that we're using the directory's filp->f_ra to hold the readahead state,
but readahead is actually being performed against the underlying blockdev's
address_space. Fortunately the readahead code is all set up to handle this.
Tested with printk. It works. I was struggling to find a real workload which
actually cared.
(The patch also exports page_cache_readahead() to GPL modules)
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix a duplicate block device line printed after the "Block device" header
in /proc/devices.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Centralize the page migration functions in anticipation of additional
tinkering. Creates a new file mm/migrate.c
1. Extract buffer_migrate_page() from fs/buffer.c
2. Extract central migration code from vmscan.c
3. Extract some components from mempolicy.c
4. Export pageout() and remove_from_swap() from vmscan.c
5. Make it possible to configure NUMA systems without page migration
and non-NUMA systems with page migration.
I had to so some #ifdeffing in mempolicy.c that may need a cleanup.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implementation of hugetlbfs_counter() is functionally equivalent to
atomic_inc_return(). Use the simpler atomic form.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
These days, hugepages are demand-allocated at first fault time. There's a
somewhat dubious (and racy) heuristic when making a new mmap() to check if
there are enough available hugepages to fully satisfy that mapping.
A particularly obvious case where the heuristic breaks down is where a
process maps its hugepages not as a single chunk, but as a bunch of
individually mmap()ed (or shmat()ed) blocks without touching and
instantiating the pages in between allocations. In this case the size of
each block is compared against the total number of available hugepages.
It's thus easy for the process to become overcommitted, because each block
mapping will succeed, although the total number of hugepages required by
all blocks exceeds the number available. In particular, this defeats such
a program which will detect a mapping failure and adjust its hugepage usage
downward accordingly.
The patch below addresses this problem, by strictly reserving a number of
physical hugepages for hugepage inodes which have been mapped, but not
instatiated. MAP_SHARED mappings are thus "safe" - they will fail on
mmap(), not later with an OOM SIGKILL. MAP_PRIVATE mappings can still
trigger an OOM. (Actually SHARED mappings can technically still OOM, but
only if the sysadmin explicitly reduces the hugepage pool between mapping
and instantiation)
This patch appears to address the problem at hand - it allows DB2 to start
correctly, for instance, which previously suffered the failure described
above.
This patch causes no regressions on the libhugetblfs testsuite, and makes a
test (designed to catch this problem) pass which previously failed (ppc64,
POWER5).
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Cc: William Lee Irwin III <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Now that compound page handling is properly fixed in the VM, move nommu
over to using compound pages rather than rolling their own refcounting.
nommu vm page refcounting is broken anyway, but there is no need to have
divergent code in the core VM now, nor when it gets fixed.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: David Howells <dhowells@redhat.com>
(Needs testing, please).
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
SLAB_NO_REAP is documented as an option that will cause this slab not to be
reaped under memory pressure. However, that is not what happens. The only
thing that SLAB_NO_REAP controls at the moment is the reclaim of the unused
slab elements that were allocated in batch in cache_reap(). Cache_reap()
is run every few seconds independently of memory pressure.
Could we remove the whole thing? Its only used by three slabs anyways and
I cannot find a reason for having this option.
There is an additional problem with SLAB_NO_REAP. If set then the recovery
of objects from alien caches is switched off. Objects not freed on the
same node where they were initially allocated will only be reused if a
certain amount of objects accumulates from one alien node (not very likely)
or if the cache is explicitly shrunk. (Strangely __cache_shrink does not
check for SLAB_NO_REAP)
Getting rid of SLAB_NO_REAP fixes the problems with alien cache freeing.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If a file is not found in v9fs_vfs_lookup, the function creates negative
dentry, but doesn't assign any dentry ops. This leaves the negative entry
in the cache (there is no d_delete to mark it for removal). If the file is
created outside of the mounted v9fs filesystem, the file shows up in the
directory with weird permissions.
This patch assigns the default v9fs dentry ops to the negative dentry.
Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
rewrite clustering. This prevents writing excessive amounts of clean data
when doing random rewrites of a cached file.
SGI-PV: 951193
SGI-Modid: xfs-linux-melb:xfs-kern:25531a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
of xfs_itruncate_start().
SGI-PV: 947420
SGI-Modid: xfs-linux-melb:xfs-kern:25527a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
conversion and concurrent truncate operations. Use vn_iowait to wait for
the completion of any pending DIOs. Since the truncate requires exclusive
IOLOCK, so this blocks any further DIO operations since DIO write also
needs exclusive IOBLOCK. This serves as a barrier and prevent any
potential starvation.
SGI-PV: 947420
SGI-Modid: xfs-linux-melb:xfs-kern:208088a
Signed-off-by: Yingping Lu <yingping@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
the trace.
SGI-PV: 948300
SGI-Modid: xfs-linux-melb:xfs-kern:208069a
Signed-off-by: Yingping Lu <yingping@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Add default selection of CRYPTO_CAST5 when selecting RPCSEC_GSS_SPKM3.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The nlmsvc_traverse_shares return value is always zero, hence useless.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Note that we never return non-zero.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Thanks to Frank Filz for pointing out that we list system.nfs4_acl extended
attribute even on filesystems where we don't actually support nfs4_acl.
This is inconsistent with the e.g. ext3 POSIX ACL behaviour, and seems to
annoy cp.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently this will not happen if we exit before rpc_new_task() was called.
Also fix up rpc_run_task() to do the same (for consistency).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
As pointed out by Oliver Neukum.
Cc: Maneesh Soni <maneesh@in.ibm.com>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These functions should only be used by the kobject core, and if any
driver tries to use them, bad things happen. Unexport them to try to
prevent this from happening.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I wanted to export a binary blob via debugfs, and although it was pretty easy
it seems like it'd be easier if there was a helper for it. It's a pity we need
the wrapper struct but I can't see a cleaner way to do it.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The following patch checks for existing sysfs_dirent before
preparing new one while creating sysfs directories and files.
Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
this converts fs/sysfs to kzalloc() usage.
compile tested with make allyesconfig
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert the kobj_map code to use a mutex instead of a semaphore. It
converts the single two users as well, genhd.c and char_dev.c.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When calling sysfs_remove_dir() don't allow any further sysfs functions
to work for this kobject anymore. This fixes a nasty USB cdc-acm oops
on disconnect.
Many thanks to Bob Copeland and Paul Fulghum for taking the time to
track this down.
Cc: Bob Copeland <email@bobcopeland.com>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch augments the collection of inode info during syscall
processing. It represents part of the functionality that was provided
by the auditfs patch included in RHEL4.
Specifically, it:
- Collects information for target inodes created or removed during
syscalls. Previous code only collects information for the target
inode's parent.
- Adds the audit_inode() hook to syscalls that operate on a file
descriptor (e.g. fchown), enabling audit to do inode filtering for
these calls.
- Modifies filtering code to check audit context for either an inode #
or a parent inode # matching a given rule.
- Modifies logging to provide inode # for both parent and child.
- Protect debug info from NULL audit_names.name.
[AV: folded a later typo fix from the same author]
Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The audit hooks (to be added shortly) will want to see dentry->d_inode
too, not just the name.
Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Kudos to Neil Brown for spotting the problem:
"in nfs_sync_inode, there is effectively the sequence:
nfs_wait_on_requests
nfs_flush_inode
nfs_commit_inode
This seems a bit racy to me as if the only requests are on the
->commit list, and nfs_commit_inode is called separately after
nfs_wait_on_requests completes, and before nfs_commit_inode start
(say: by nfs_write_inode) then none of these function will return
>0, yet there will be some pending request that aren't waited for."
The solution is to search for requests to wait upon, search for dirty
requests, and search for uncommitted requests while holding the
nfsi->req_lock
The patch also cleans up nfs_sync_inode(), getting rid of the redundant
FLUSH_WAIT flag. It turns out that we were always setting it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't need to set PG_private for readahead pages, since they never get
unlocked while I/O is in progress. However there is a small race in
nfs_readpage_release() whereby the page may be unlocked, and have
PG_private set.
Fix is to have PG_private set only for the case of writes...
Also fix a bug in nfs_clear_page_writeback(): Don't attempt to clear the
radix_tree tag if we've already deleted the radix tree entry.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the callback daemon is signalled, but is unable to exit because it still
has users, then we need to flush signals. If not, then svc_recv() can
never sleep, and so we hang.
If we flush signals, then we also have to be prepared to resend them when
we want the thread to exit.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently it returns NULL, which usually gets interpreted as ENOMEM. In
fact it can mean a host of issues.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The mount statistics patches introduced a call to nfs_free_iostats that is
not only redundant, but actually causes an oops.
Also fix a memory leak due to the lack of a call to nfs_free_iostats on
unmount.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The struct file_lock does not carry a properly initialised lock,
so don't copy it as if it were.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that we have aio writes, it is possible for dreq->outstanding to be
zero, but for the I/O not to have completed. Convert struct nfs_direct_req
to use a completion to signal when the I/O is done.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Introduced by NFS aio+dio patches.
Test plan:
Compile kernel with CONFIG_NFS enabled on 64-bit hardware.
Signed-off-by: Chuck Lever <cel@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The patch "stop abusing file_lock_list introduces a couple of bugs since
the locks may be copied and need to be removed from the lists when they are
destroyed.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently lockd directly access the file_lock_list from fs/locks.c.
It does so to mark locks granted or reclaimable. This is very
suboptimal, because a) lockd needs to poke into locks.c internals, and
b) it needs to iterate over all locks in the system for marking locks
granted or reclaimable.
This patch adds lists for granted and reclaimable locks to the nlm_host
structure instead, and adds locks to those.
nlmclnt_lock:
now adds the lock to h_granted instead of setting the
NFS_LCK_GRANTED, still O(1)
nlmclnt_mark_reclaim:
goes away completely, replaced by a list_splice_init.
Complexity reduced from O(locks in the system) to O(1)
reclaimer:
iterates over h_reclaim now, complexity reduced from
O(locks in the system) to O(locks per nlm_host)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When doing NLM_GRANTED requests, lockd may end up blocking if we use
rpc_create_client() due to the synchronous call to rpc_ping(). Instead, use
rpc_new_client().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently it uses nlmclnt_lookup_host(), which puts the resulting host
structure on a different list.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
