As of commit fea82210 ("m68k: switch to saner kernel_execve() semantics")
the non-mmu m68k targets have trapped on booting. The execing of /bin/init
causes the exec path to try and return through a 0x0 return address - thus
trapping or otherwise hanging or crashing.
The problem isn't in the exec path as such though, but rather in the
m68knommu start_thread() macro. It is trying to clear the a6 register that
it assumes is part of a struct switch_stack below the thread registers on
our stack. But that is not what the stack frames look like when this is run.
So it ends up corrupting our call stack and zeroing out a function return
address that is sitting there.
The clearing of a6 was introduced many years ago in commit 7bf9a37d8d
("m68knommu: force stack alignment on ColdFire"). It used to work because
the kernel init exec code path had a short cut back to the exception return
code, and it didn't need to return through the calls on the stack.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
In our test lab, we have a simple SCTP client connecting to a SCTP
server via an IPVS load balancer. On some machines, load balancing
works, but on others the initial handshake just fails, thus no
SCTP connection whatsoever can be established!
We observed that the SCTP INIT-ACK handshake reply from the IPVS
machine to the client had a correct IP checksum, but corrupt SCTP
checksum when forwarded, thus on the client-side the packet was
dropped and an intial handshake retriggered until all attempts
run into the void.
To fix this issue, this patch i) adds a missing CHECKSUM_UNNECESSARY
after the full checksum (re-)calculation (as done in IPVS TCP and UDP
code as well), ii) calculates the checksum in little-endian format
(as fixed with the SCTP code in commit 4458f04c: sctp: Clean up sctp
checksumming code) and iii) refactors duplicate checksum code into a
common function. Tested by myself.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Pull media fixes from Mauro Carvalho Chehab:
"For a regression fix on a few radio drivers that were preventing radio
TX to work on those devices"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] radio: set vfl_dir correctly to fix modulator regression
Here are a few tiny USB fixes for 3.8-rc6.
Nothing major here, some host controller bug fixes to resolve a number
of bugs that people have reported, and a bunch of additional device ids
are added to a number of drivers (which caused code to be deleted from
the usb-storage driver, always nice.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlERRT4ACgkQMUfUDdst+ylxAQCghY23x/0vT9oCsrWZzKeOFOMB
J64AoNjVngpCpIcmh/yk1tgjSRSQu3dn
=p4nA
-----END PGP SIGNATURE-----
Merge tag 'usb-3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are a few tiny USB fixes for 3.8-rc6.
Nothing major here, some host controller bug fixes to resolve a number
of bugs that people have reported, and a bunch of additional device
ids are added to a number of drivers (which caused code to be deleted
from the usb-storage driver, always nice)"
* tag 'usb-3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
USB: storage: optimize to match the Huawei USB storage devices and support new switch command
USB: storage: Define a new macro for USB storage match rules
USB: ftdi_sio: add Zolix FTDI PID
USB: option: add Changhong CH690
USB: ftdi_sio: add PID/VID entries for ELV WS 300 PC II
USB: add OWL CM-160 support to cp210x driver
USB: EHCI: fix bug in scheduling periodic split transfers
USB: EHCI: fix for leaking isochronous data
USB: option: add support for Telit LE920
USB: qcserial: add Telit Gobi QDL device
USB: EHCI: fix timer bug affecting port resume
USB: UHCI: notify usbcore about port resumes
USB: EHCI: notify usbcore about port resumes
USB: add usb_hcd_{start,end}_port_resume
USB: EHCI: unlink one async QH at a time
USB: EHCI: remove ASS/PSS polling timeout
usb: Using correct way to clear usb3.0 device's remote wakeup feature.
usb: Prevent dead ports when xhci is not enabled
USB: XHCI: fix memory leak of URB-private data
drivers: xhci: fix incorrect bit test
...
Pull DMA mapping fixes from Marek Szyprowski:
"This pull request contains important bugfix patches for 9
architectures, which finally fixes broken allmodconfig builds
introduced in v3.8-rc1. Those architectures don't use dma_map_ops
based implementation and require manual update or additional dummy
implementations of the missing new dma-mapping api functions:
dma_mmap_coherent and dma_get_sgtable."
* 'fixes-for-v3.8-rc7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
xtensa: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
parisc: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
mn10300: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
m68k: Provide dma_mmap_coherent() and dma_get_sgtable()
frv: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
cris: Provide dma_mmap_coherent() and dma_get_sgtable()
c6x: Provide dummy dma_mmap_coherent() and dma_get_sgtable()
blackfin: Provide dma_mmap_coherent() and dma_get_sgtable()
avr32: Provide dma_mmap_coherent() and dma_get_sgtable()
We specifically do not update the disk i_size if there are ordered extents
outstanding for any area between the current disk_i_size and our ordered
extent so that we do not expose stale data. The problem is the check we
have only checks if the ordered extent starts at or after the current
disk_i_size, which doesn't take into account an ordered extent that starts
before the current disk_i_size and ends past the disk_i_size. Fix this by
checking if the extent ends past the disk_i_size. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
If we have an ordered extent before the ordered extent we are currently
completing that is after the current disk_i_size we will put our i_size
update into that ordered extent so that we do not expose stale data. The
problem is that if our disk i_size is updated past the previous ordered
extent we won't update the i_size with the pending i_size update. So check
the pending i_size update and if its above the current disk i_size we need
to go ahead and try to update. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
While running snapshot testscript created by Mitch and David,
the race between autodefrag and snapshot deletion can lead to
corruption of dead_root list so that we can get crash on
btrfs_clean_old_snapshots().
And besides autodefrag, scrub also does the same thing, ie. read
root first and get inode.
Here is the story(take autodefrag as an example):
(1) when we delete a snapshot or subvolume, it will set its root's
refs to zero and do a iput() on its own inode, and if this inode happens
to be the only active in-meory one in root's inode rbtree, it will add
itself to the global dead_roots list for later cleanup.
(2) after (1), the autodefrag thread may read another inode for defrag
and the inode is just in the deleted snapshot/subvolume, but all of these
are without checking if the root is still valid(refs > 0). So the end up
result is adding the deleted snapshot/subvolume's root to the global
dead_roots list AGAIN.
Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu.
So all we need to do is to take the lock to protect 'read root and get inode',
since we synchronize to wait for the rcu grace period before adding something
to the global dead_roots list.
Reported-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
When we fail to start a transaction, we need to release the reserved free space
and qgroup space, fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
If the checks at the beginning of btrfs_file_aio_write() fail, we needn't
decrease ->sync_writers, because we have not increased it. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
You can run into this problem where if somebody is fsyncing and writing out
the existing extents you will have removed the extent map from the em tree,
but it's still valid for the current fsync so we go ahead and write it. The
problem is we unconditionally try to merge it back into the em tree, but if
we've removed it from the em tree that will cause use after free problems.
Fix this to only merge if we are still a part of the tree. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Commit 1fb9fed6d4 ("IB/qib: Fix QP RCU sparse warning") broke QP
hash list deletion in qp_remove() badly.
This patch restores the former for loop behavior, while still fixing
the sparse warnings.
Cc: <stable@vger.kernel.org>
Reviewed-by: Gary Leshner <gary.s.leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Commit 08ff32352d ("mlx4: 64-byte CQE/EQE support") introduced a
regression where older guest VF drivers failed to load even when
64-byte EQEs/CQEs are disabled, since the PF wrongly advertises the
new context behaviour anyway. The failure looks like:
mlx4_core 0000:00:07.0: Unknown pf context behaviour
mlx4_core 0000:00:07.0: Failed to obtain slave caps
mlx4_core: probe of 0000:00:07.0 failed with error -38
Fix this by basing this advertisement on dev->caps.flags, which is the
operational capabilities used by the QUERY_FUNC_CAP command wrapper
(dev_cap->flags holds the firmware capabilities).
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
After commit b13912bbb4 ("IPoIB: Call skb_dst_drop() once skb is
enqueued for sending"), using connected mode and running multithreaded
iperf for long time, ie
iperf -c <IP> -P 16 -t 3600
results in a crash.
After the above-mentioned patch, the driver is calling skb_orphan() and
skb_dst_drop() after calling post_send() in ipoib_cm.c::ipoib_cm_send()
(also in ipoib_ib.c::ipoib_send())
The problem with this is, as is written in a comment in both routines,
"it's entirely possible that the completion handler will run before we
execute anything after the post_send()." This leads to running the
skb cleanup routines simultaneously in two different contexts.
The solution is to always perform the skb_orphan() and skb_dst_drop()
before queueing the send work request. If an error occurs, then it
will be no different than the regular case where dev_free_skb_any() in
the completion path, which is assumed to be after these two routines.
Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
the default of_gpio_simple_xlate() will make us fail while getting gpios
bigger than 32 by of_get_named_gpio() or related APIs.
this patch adds a specific of_xlate callback for sirf gpio_chip and fix
the problem.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since pinctrl-exynos can support exynos4 and exynos5 so changed
the option name to PINCTRL_EXYNOS for more clarity.
Cc: Thomas Abraham <Thomas.abraham@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull dlm fix from David Teigland:
"Thanks to Jana who reported the problem and was able to test this fix
so quickly."
This fixes an incorrect size check that triggered for CONFIG_COMPAT
whether the code was actually doing compat or not. The incorrect write
size check broke userland (clvmd) when maximum resource name lengths are
used.
* 'fix-max-write' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: check the write size from user
Merge mix fixes from Andrew Morton.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (12 commits)
drivers/rtc/rtc-pl031.c: fix the missing operation on enable
drivers/rtc/rtc-isl1208.c: call rtc_update_irq() from the alarm irq handler
samples/seccomp: be less stupid about cross compiling
checkpatch: fix $Float creation of match variables
memcg: fix typo in kmemcg cache walk macro
mm: fix wrong comments about anon_vma lock
MAINTAINERS: update avr32 web ressources
mm/hugetlb: set PTE as huge in hugetlb_change_protection and remove_migration_pte
drivers/rtc/rtc-vt8500.c: fix year field in vt8500_rtc_set_time()
tools/vm: add .gitignore to ignore built binaries
thp: avoid dumping huge zero page
nilfs2: fix fix very long mount time issue
The RTC control register should be enabled in the process of
initializing.
Without this patch, I failed to enable RTC in Hisilicon Hi3620 SoC. The
register mapping section in RTC is always read as zero. So I doubt that
ST guys may already enable this register in bootloader. So they won't
meet this issue.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously the alarm event was not propagated into the RTC subsystem.
By adding a call to rtc_update_irq, this fixes a timeout problem with
the hwclock utility.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The seccomp filters are currently built for the build host, not for the
machine that they are going to run on, but they are also built for with
the -m32 flag if the kernel is built for a 32 bit machine, both of which
seems rather odd.
It broke allyesconfig on my machine, which is x86-64, but building for
32 bit ARM, with this error message:
In file included from /usr/include/stdio.h:28:0,
from samples/seccomp/bpf-fancy.c:15:
/usr/include/features.h:324:26: fatal error: bits/predefs.h: No such file or directory
because there are no 32 bit libc headers installed on this machine. We
should really be building all the samples for the target machine rather
than the build host, but since the infrastructure for that appears to be
missing right now, let's be a little bit smarter and not pass the '-m32'
flag to the HOSTCC when cross- compiling.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Morris <james.l.morris@oracle.com>
Acked-by: Will Drewry <wad@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 74349bcced ("checkpatch: add support for floating point
constants") added an unnecessary match variable that caused tests that
used a $Constant or $LvalOrFunc to have one too many matches.
This causes problems with usleep_range, min/max and other extended
tests.
Avoid using match variables in $Float.
Avoid using match variables in $Assignment too.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The macro for_each_memcg_cache_index contains a silly yet potentially
deadly mistake. Although the macro parameter is _idx, the loop tests
are done over i, not _idx.
This hasn't generated any problems so far, because all users use i as a
loop index. However, while playing with an extension of the code I
ended using another loop index and the compiler was quick to complain.
Unfortunately, this is not the kind of thing that testing reveals =(
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We use rwsem since commit 5a505085f0 ("mm/rmap: Convert the struct
anon_vma::mutex to an rwsem"). And most of comments are converted to
the new rwsem lock; while just 2 more missed from:
$ git grep 'anon_vma->mutex'
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Web resource http://avr32linux.org/ is no longer available. We add the
mirror of the web page foud at http://mirror.egtvedt.no/avr32linux.org/.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When setting a huge PTE, besides calling pte_mkhuge(), we also need to
call arch_make_huge_pte(), which we indeed do in make_huge_pte(), but we
forget to do in hugetlb_change_protection() and remove_migration_pte().
Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Hillf Danton <dhillf@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The year field is incorrectly masked when setting the date. If the year
is beyond 2099, the year field will be incorrectly updated in hardware.
This patch masks the year field correctly.
Signed-off-by: Edgar Toernig <froese@gmx.de>
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no .gitignore in tools/vm, so 'git status' always show built
binaries. To ignore this, add .gitignore.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No reason to preserve the huge zero page in core dumps.
Reported-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There exists a situation when GC can work in background alone without
any other filesystem activity during significant time.
The nilfs_clean_segments() method calls nilfs_segctor_construct() that
updates superblocks in the case of NILFS_SC_SUPER_ROOT and
THE_NILFS_DISCONTINUED flags are set. But when GC is working alone the
nilfs_clean_segments() is called with unset THE_NILFS_DISCONTINUED flag.
As a result, the update of superblocks doesn't occurred all this time
and in the case of SPOR superblocks keep very old values of last super
root placement.
SYMPTOMS:
Trying to mount a NILFS2 volume after SPOR in such environment ends with
very long mounting time (it can achieve about several hours in some
cases).
REPRODUCING PATH:
1. It needs to use external USB HDD, disable automount and doesn't
make any additional filesystem activity on the NILFS2 volume.
2. Generate temporary file with size about 100 - 500 GB (for example,
dd if=/dev/zero of=<file_name> bs=1073741824 count=200). The size of
file defines duration of GC working.
3. Then it needs to delete file.
4. Start GC manually by means of command "nilfs-clean -p 0". When you
start GC by means of such way then, at the end, superblocks is updated
by once. So, for simulation of SPOR, it needs to wait sometime (15 -
40 minutes) and simply switch off USB HDD manually.
5. Switch on USB HDD again and try to mount NILFS2 volume. As a
result, NILFS2 volume will mount during very long time.
REPRODUCIBILITY: 100%
FIX:
This patch adds checking that superblocks need to update and set
THE_NILFS_DISCONTINUED flag before nilfs_clean_segments() call.
Reported-by: Sergey Alexandrov <splavgm@gmail.com>
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch addresses a long standing issue of the driver with the
mac80211 .flush() callback. Since implementing the .flush() callback
a number of issues have been fixed, but a WARN_ON_ONCE() was still
triggered because the timeout on the flush could still occur.
This patch changes the awkward design using msleep() into one using
a waitqueue. The waiting flush() context will kick the transmit dma
when it is idle and the timeout used waiting for the event is set
to 500 ms. Worst case there can be 64 frames outstanding for transmit
in the driver. At a rate of 1Mbps that would take 1.5 seconds assuming
MTU is 1500 bytes and ignoring retries. The WARN_ON_ONCE() is also
removed as this was put in to indicate the flush timeout as a reason
for the driver to stall. That was not happening since fixing endless
AMPDU retries with following upstream commit:
commit 85091fc0a7
Author: Arend van Spriel <arend@broadcom.com>
Date: Thu Feb 23 18:38:22 2012 +0100
brcm80211: smac: fix endless retry of A-MPDU transmissions
bugzilla: 42840 <https://bugzilla.kernel.org/show_bug.cgi?id=42840>
bugzilla@redhat: <https://bugzilla.redhat.com/show_bug.cgi?id=799168>
bugzilla@redhat: <https://bugzilla.redhat.com/show_bug.cgi?id=787649>
Cc: Jonathan Nieder <jrnieder@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Camaleón <noelamac@gmail.com>
Cc: Milan Bouchet-Valat <nalimilan@club-internet.fr>
Cc: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch unregisters the gpio chip before ssb gets unloaded.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch unregisters the gpio chip before bcma gets unloaded.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reported-by: Piotr Haber <phaber@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Kernel commits 41affd5 and 6539306 changed the locking in rtl_lps_leave()
from a spinlock to a mutex by doing the calls indirectly from a work queue
to reduce the time that interrupts were disabled. This change was fine for
most systems; however a scheduling while atomic bug was reported in
https://bugzilla.redhat.com/show_bug.cgi?id=903881. The backtrace indicates
that routine rtl_is_special(), which calls rtl_lps_leave() in three places
was entered in atomic context. These direct calls are replaced by putting a
request on the appropriate work queue.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-and-tested-by: Nathaniel Doherty <ntdoherty@gmail.com>
Cc: Nathaniel Doherty <ntdoherty@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Return EINVAL from write if the size is larger than
allowed. Do this before allocating kernel memory for
the bogus size, which could lead to OOM.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Tested-by: Jana Saout <jana@saout.de>
Signed-off-by: David Teigland <teigland@redhat.com>
Pull x86 fixes from Ingo Molnar:
"Three small fixlets"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel/cacheinfo: Shut up annoying warning
x86, doc: Boot protocol 2.12 is in 3.8
x86-64: Replace left over sti/cli in ia32 audit exit code
Pull scheduler fixes from Ingo Molnar:
"Three small fixlets"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Fix format string for 32-bit platforms
sched: Fix warning in kernel/sched/fair.c
sched/rt: Use root_domain of rt_rq not current processor
Pull perf fixes from Ingo Molnar:
"Three fixlets and two small (and low risk) hw-enablement changes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix event group context move
x86/perf: Add IvyBridge EP support
perf/x86: Fix P6 driver section warning
arch/x86/tools/insn_sanity.c: Identify source of messages
perf/x86: Enable Intel Lincroft/Penwell/Cloverview Atom support
Pull two small RCU fixlets from Ingo Molnar.
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Make rcu_nocb_poll an early_param instead of module_param
rcu: Prevent soft-lockup complaints about no-CBs CPUs
