Commit Graph

281 Commits

Author SHA1 Message Date
Stefan Richter
9154df538f ieee1394: remove #include <asm/semaphore.h>
These includes in ieee1394_core and eth1394 are obsolete.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:18:50 +02:00
Stefan Richter
9951903e61 ieee1394: shrink tlabel pools, remove tpool semaphores
This patch reduces the size of struct hpsb_host and also removes
semaphores from ieee1394_transactions.c.  On i386, struct hpsb_host
shrinks from 10656 bytes to 6688 bytes.  This is accomplished by
 - using a single wait_queue for hpsb_get_tlabel instead of many
   instances of semaphores,
 - using a single lock to serialize access to all tlabel pools (the
   protected code regions are small, i.e. lock contention very low),
 - omitting the sysfs attribute tlabels_allocations.

Drawback:  In the rare case that a process needs to sleep because all
transaction labels for the node are temporarily exhausted, it is also
woken up if a tlabel for a different node became free, checks for an
available tlabel, and is put to sleep again.  The check is not costly
and the situation occurs extremely rarely.  (Tlabels are typically
only exhausted if there was no context switch to the khpsbpkt thread
which recycles tlables.)  Therefore the benefit of reduced tpool size
outweighs this drawback.

The sysfs attributes tlabels_free and tlabels_mask are not compiled
anymore unless CONFIG_IEEE1394_VERBOSEDEBUG is set.

The by far biggest member of struct hpsb_host, the struct csr_control
csr (5272 bytes on i386), is now placed at the end of struct hpsb_host.

Note, hpsb_get_tlabel calls the macro wait_event_interruptible with a
condition argument which has a side effect (allocation of a tlabel and
manipulation of the packet).  This side effect happens only if the
condition is true.  The patch relies on wait_event_interruptible not
evaluating the condition again after it became true.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 19:17:13 +02:00
Stefan Richter
9b4f2e9576 ieee1394: merge from Linus
Conflicts: drivers/ieee1394/hosts.c
Patch "lockdep: annotate ieee1394 skb-queue-head locking" was meddling
with patch "ieee1394: fix kerneldoc of hpsb_alloc_host".

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2006-09-17 18:19:31 +02:00
Danny Tholen
7334bb4ae9 [PATCH] 1394: fix for recently added firewire patch that breaks things on ppc
Recently a patch was added for preliminary suspend/resume handling on
!PPC_PMAC.  However, this broke both suspend and firewire on powerpc
because it saves the pci state after the device has already been disabled.

This moves the save state to before the pmac specific code.

Signed-off-by: Danny Tholen <obiwan@mailmij.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Collins <bcollins@ubuntu.com>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:28 -07:00
Stefan Richter
e31f59ce59 [PATCH] ieee1394: sbp2: enable auto spin-up for Maxtor disks
At least Maxtor OneTouch III require a "start stop unit" command after auto
spin-down before the next access can proceed.  This patch activates the
responsible code in scsi_mod for all Maxtor SBP-2 disks.
https://bugzilla.novell.com/show_bug.cgi?id=183011

Maybe that should be done for all SBP-2 disks, but better be cautious.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06 08:57:48 -07:00
Ingo Molnar
d378834840 [PATCH] lockdep: annotate ieee1394 skb-queue-head locking
ieee1394 reuses the skb infrastructure of the networking code, and uses two
skb-head queues: ->pending_packet_queue and hpsbpkt_queue.  The latter is used
in the usual fashion: processed from a kernel thread.  The other one,
->pending_packet_queue is also processed from hardirq context (f.e.  in
hpsb_bus_reset()), which is not what the networking code usually does (which
completes from softirq or process context).  This locking assymetry can be
totally correct if done carefully, but it can also be dangerous if networking
helper functions are reused, which could assume traditional networking use.

It would probably be more robust to push this completion into a workqueue -
but technically the code can be 100% correct, and lockdep has to be taught
about it.  The solution is to split the ->pending_packet_queue skb-head->lock
class from the networking lock-class by using a private lock-validator key.

Has no effect on non-lockdep kernels.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:08 -07:00
Stefan Richter
3c6c65f5ed [PATCH] ieee1394: fix kerneldoc of hpsb_alloc_host
There was stuff between the comment and the function.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:37 -04:00
Stefan Richter
cab8d154e2 [PATCH] ieee1394: nodemgr: convert nodemgr_serialize semaphore to mutex
Another trivial sem2mutex conversion.

Side note:  nodemgr_serialize's purpose, when introduced in linux1394's
revision 529 in July 2002, was to protect several data structures which
are now largely handled by or together with Linux' driver core and are
now protected by the LDM's own mechanisms.  It may very well be possible
to remove this mutex now.  But fully parallelized node scanning is on
our long-term TODO list anyway; the mutex will certainly go away then.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:36 -04:00
Stefan Richter
d2f119fe31 [PATCH] ieee1394: nodemgr: switch to kthread api, replace reset semaphore
Convert nodemgr's host thread from kernel_thread to kthread and its
sleep/restart mechanism from a counting semaphore to a schedule()/
wake_up_process() scheme.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:35 -04:00
Stefan Richter
3a632fe232 [PATCH] ieee1394: nodemgr: make module parameter ignore_drivers writable
Nodemgr's ignore_drivers variable is exposed as a module load parameter
(therefore also as a sysfs attribute below /sys/module) and additionally
as an attribute below /sys/bus/ieee1394.  Since the latter is writable,
make the former writable too.

Note, the bus's attribute ignore_drivers is only relevant to newly added
units, not to present or suspended or resuming units.  Those have their
own attribute ignore_driver.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:35 -04:00
Stefan Richter
40fd89cc54 [PATCH] ieee1394: nodemgr: do not spawn kernel_thread for sysfs rescan
nodemgr.c::fw_set_rescan() is used to re-run the driver core over
nodemgr's representation of unit directories in order to initiate
protocol driver probes.  It is initiated via write access to one of
nodemgr's sysfs attributes.  The purpose is to attach drivers to
units after switching a unit's ignore_driver attribute from 1 to 0.

It is not really necessary to fork a kernel_thread for this job.  The
call to kernel_thread() can be eliminated to avoid the deprecated API
and to simplify the code a bit.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:34 -04:00
Stefan Richter
1ee0dc51fb [PATCH] ieee1394: nodemgr: remove unnecessary includes
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:33 -04:00
Stefan Richter
45289bf6ac [PATCH] ieee1394: raw1394: remove redundant counting semaphore
An already existing wait queue replaces raw1394's complete_sem which was
maintained in parallel to the wait queue.  The role of the semaphore's
counter is taken over by a direct check of what was really counted:  The
presence of items in the list of completed requests.

Notes:

 - raw1394_release() sleeps uninterruptibly until all requests were
   completed.  This is the same behaviour as before the patch.

 - The macros wait_event and wait_event_interruptible are called with a
   condition argument which has a side effect, i.e. manipulation of the
   requests list.  This side effect happens only if the condition is
   true.  The patch relies on the fact that wait_event[_interruptible]
   does not evaluate the condition again after it became true.

 - The diffstat looks unfavorable with respect to added lines of code.
   However 19 of them are comments, and some are due to separation of
   existing code blocks into two small helper functions.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:33 -04:00
Stefan Richter
438bd525e5 [PATCH] ieee1394: dv1394: sem2mutex conversion
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (not runtime-tested)
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:32 -04:00
Stefan Richter
d8831d5554 [PATCH] ieee1394: clean up declarations of hpsb_*_config_rom
hpsb_update_config_rom() is defined in csr.c, not hosts.c.
hpsb_get_config_rom() does not exist.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:31 -04:00
Stefan Richter
d83e7d8e7e [PATCH] ieee1394: remove unused macros HPSB_PANIC and HPSB_TRACE
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:31 -04:00
Stefan Richter
66faadfac3 [PATCH] ieee1394: remove redundant code from ieee1394_hotplug.h
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:30 -04:00
Stefan Richter
de4394f13c [PATCH] ieee1394: update #include directives in midlayer header files
Remove unnecessary includes, add missing includes.
Use forward type declarations for some structs.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:29 -04:00
Stefan Richter
e1d118f16d [PATCH] ieee1394: coding style and comment fixes in midlayer header files
Adjust tabulators, line wraps, empty lines, and comment style.
Update comments in ieee1394_transactions.h and highlevel.h.
Fix typo in comment in csr.h.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:28 -04:00
Stefan Richter
2b01b80b94 [PATCH] ieee1394: replace __inline__ by inline
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:28 -04:00
Stefan Richter
433a87d528 [PATCH] ieee1394: skip dummy loop in build_speed_map
The last loop in ieee1394 core's speed calculation is not required
unless ieee1394.h::IEEE1394_SPEED_MAX is changed from its current value
of 3.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:02:27 -04:00
Stefan Richter
f0cbefe63c [PATCH] ieee1394: fix calculation of csr->expire
This variant of calculate_expire() is more correct and easier to read.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:01:59 -04:00
Stefan Richter
31a379e106 [PATCH] ieee1394: sbp2: enable auto spin-up for Maxtor disks
At least Maxtor OneTouch III require a "start stop unit" command after
auto spin-down before the next access can proceed.  This patch activates
the responsible code in scsi_mod for all Maxtor SBP-2 disks.
https://bugzilla.novell.com/show_bug.cgi?id=183011

Maybe that should be done for all SBP-2 disks, but better be cautious.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 12:01:58 -04:00
Stefan Richter
d7530a1e76 [PATCH] ieee1394: fix cosmetic problem in speed probe
If ieee1394.h::IEEE1394_SPEED_MAX is bigger than the actual speed of an
1394b host adapter and the speed to another 1394b node was probed, a
bigger speed than actually used was kept in host->speed[n].  The only
resulting problem so far was sbp2 displaying bogus values in the syslog,
e.g. S3200 for actual S800 connections if IEEE1394_SPEED_MAX was S3200.
But other high-level drivers which access this field could get into more
trouble.  (Eth1394 is the only other in-tree driver which does so.  It
seems it is not affected.)

Nodemgr now clips this value according to the host adapter's link speed.

A pointer expression in nodemgr_check_speed is also changed for clarity.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-07-03 00:03:59 -04:00
Thomas Gleixner
272ee69c65 [PATCH] irq-flags: firewire: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@debian.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:50 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Greg Kroah-Hartman
2427ddd8fa [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:24:00 -07:00
Greg Kroah-Hartman
e29419fffc [PATCH] 64bit resource: fix up printks for resources in misc drivers
This is needed if we wish to change the size of the resource structures.

Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:23:59 -07:00
Linus Torvalds
da206c9e68 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  typo fixes
  Clean up 'inline is not at beginning' warnings for usb storage
  Storage class should be first
  i386: Trivial typo fixes
  ixj: make ixj_set_tone_off() static
  spelling fixes
  fix paniced->panicked typos
  Spelling fixes for Documentation/atomic_ops.txt
  move acknowledgment for Mark Adler to CREDITS
  remove the bouncing email address of David Campbell
2006-06-26 13:33:14 -07:00
Akinobu Mita
179e09172a [PATCH] drivers: use list_move()
This patch converts the combination of list_del(A) and list_add(A, B) to
list_move(A, B) under drivers/.

Acked-by: Corey Minyard <minyard@mvista.com>
Cc: Ben Collins <bcollins@debian.org>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Alasdair Kergon <dm-devel@redhat.com>
Cc: Gerd Knorr <kraxel@bytesex.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frank Pavlic <fpavlic@de.ibm.com>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Cc: Andrew Vasquez <linux-driver@qlogic.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:18 -07:00
Andreas Mohr
d6e05edc59 spelling fixes
acquired (aquired)
contiguous (contigious)
successful (succesful, succesfull)
surprise (suprise)
whether (weather)
some other misspellings

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26 18:35:02 +02:00
Stefan Richter
09a9a45dc6 [PATCH] ieee1394: nodemgr: do not peek into struct semaphore
Also revert patch "frv: ieee1394 is borken on frv", as it no longer is.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:00:54 -07:00
Al Viro
a73df4dfdb [PATCH] frv: ieee1394 is borken on frv
The ieee1394 assumes it may make direct use of ->count in the semaphore
structure.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Ben Collins <bcollins@ubuntu.com>
Cc: Jody McIntyre <scjody@modernduck.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:55 -07:00
Linus Torvalds
34641a58a2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6: (28 commits)
  eth1394: replace __constant_htons by htons
  ieee1394: adjust code formatting in highlevel.c
  ieee1394: hl_irqs_lock is taken in hardware interrupt context
  ieee1394_core: switch to kthread API
  ieee1394: sbp2: Kconfig fix
  ieee1394: add preprocessor constant for invalid csr address
  sbp2: fix deregistration of status fifo address space
  [PATCH] eth1394: endian fixes
  Fix broken suspend/resume in ohci1394
  sbp2: use __attribute__((packed)) for on-the-wire structures
  sbp2: provide helptext for CONFIG_IEEE1394_SBP2_PHYS_DMA and mark it experimental
  Update feature removal of obsolete raw1394 ISO requests.
  sbp2: fix S800 transfers if phys_dma is off
  sbp2: remove ohci1394 specific constant
  ohci1394: make phys_dma parameter read-only
  ohci1394: set address range properties
  ieee1394: extend lowlevel API for address range properties
  sbp2: log number of supported concurrent logins
  sbp2: remove manipulation of inquiry response
  ieee1394: save RAM by using a single tlabel for broadcast transactions
  ...
2006-06-20 20:01:16 -07:00
David S. Miller
c6387a48cf [SPARC]: Kill __irq_itoa().
This ugly hack was long overdue to die.

It was a way to print out Sparc interrupts in a more freindly format,
since IRQ numbers were arbitrary opaque 32-bit integers which vectored
into PIL levels.  These 32-bit integers were not necessarily in the
0-->NR_IRQS range, but the PILs they vectored to were.

The idea now is that we will increase NR_IRQS a little bit and use a
virtual<-->real IRQ number mapping scheme similar to PowerPC.

That makes this IRQ printing hack irrelevant, and furthermore only a
handful of drivers actually used __irq_itoa() making it even less
useful.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:21:29 -07:00
Ben Collins
7136b8073f eth1394: replace __constant_htons by htons
...and __constant_ntohs, __constant_ntohl, __constant_cpu_to_be32 too
where possible.  Htons and friends are resolved to constants in these
places anyway.  Also fix an endianess glitch in a log message, spotted
by Alexey Dobriyan.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:16:25 -04:00
Ben Collins
2c4b69bd7b ieee1394: adjust code formatting in highlevel.c
Replace spaces by tabulators, wrap lines at 80 columns, delete some
blank lines and superfluous braces.  Collapse some if()-within-if()
constructs.  Replace a literal CSR address by its preprocessor constant.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:16:16 -04:00
Ben Collins
445151932e ieee1394: hl_irqs_lock is taken in hardware interrupt context
ohci1394 and pcilynx call highlevel_host_reset from their hardware
interrupt handler (via hpsb_selfid_complete).  Therefore all readers and
writers of hl_irqs_lock have to disable interrupts.  Reported by Jiri
Slaby and J. A. Magallon.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:16:01 -04:00
Ben Collins
f654240f33 ieee1394_core: switch to kthread API
This gets also rid of the MODPOST warning "drivers/ieee1394/ieee1394.o -
Section mismatch: reference to .exit.text: from .smp_locks after '' (at
offset 0x18)".

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:15:50 -04:00
Ben Collins
dd082c6705 ieee1394: sbp2: Kconfig fix
We only support x86 and ppc, due to the use of bus_to_virt() and friends.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:15:40 -04:00
Ben Collins
6737231ead ieee1394: add preprocessor constant for invalid csr address
Replace occurrences of the magic value ~(u64)0 for invalid
CSR address spaces by a named constant for better readability.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:15:31 -04:00
Ben Collins
e269d27679 sbp2: fix deregistration of status fifo address space
The proper designator of an invalid CSR address is ~(u64)0, not (u64)0.
Use the correct value in initialization and deregistration.
Also, scsi_id->sbp2_lun does not need to be initialized twice.
(scsi_id was kzalloc'd.)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:15:20 -04:00
Ben Collins
02f4213fc4 [PATCH] eth1394: endian fixes
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:15:11 -04:00
Ben Collins
b21efb59c5 Fix broken suspend/resume in ohci1394
I've been experimenting to track down the cause of suspend/resume problems
on my Compaq Presario X1050 laptop:

http://bugzilla.kernel.org/show_bug.cgi?id=6075

Essentially the ACPI Embedded Controller and keyboard controller would
get into a bizarre, confused state after resume.

I found that unloading the ohci1394 module before suspend and reloading it
after resume made the problem go away.  Diffing the dmesg output from
resume, with and without the module loaded, I found that with the module
loaded I was missing these:

PM: Writing back config space on device 0000:02:00.0 at offset 1. (Was 2100080, writing 2100007)
PM: Writing back config space on device 0000:02:00.0 at offset 3. (Was 0, writing 8008)
PM: Writing back config space on device 0000:02:00.0 at offset 4. (Was 0, writing 90200000)
PM: Writing back config space on device 0000:02:00.0 at offset 5. (Was 1, writing 2401)
PM: Writing back config space on device 0000:02:00.0 at offset f. (Was 20000100, writing 2000010a)

The default PCI driver performs the pci_restore_state when no driver is
loaded for the device.  When the ohci1394 driver is loaded, it is supposed
to do this, however it appears not to do so.

I created the patch below and tested it, and it appears to resolve the
suspend problems I was having with the module loaded.  I only added in the
pci_save_state and pci_restore_state - however, though I know little of
this hardware, surely the driver should really be doing more than this when
suspending and resuming?  Currently it does almost nothing, what if there
are commands in progress, etc?

Signed-off-by: Robert Hancock <hancockr@shaw.ca>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Ben Collins <bcollins@debian.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:15:03 -04:00
Ben Collins
05db5055b1 sbp2: use __attribute__((packed)) for on-the-wire structures
It seems to have worked without the attribute during all the years
just because sizes of all struct members are multiples of 32 bits.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:14:47 -04:00
Ben Collins
bccbccdbf8 sbp2: provide helptext for CONFIG_IEEE1394_SBP2_PHYS_DMA and mark it experimental
It appears I will not get it fixed overnight.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:14:36 -04:00
Ben Collins
fd23ade80e sbp2: fix S800 transfers if phys_dma is off
If sbp2 is forced to move data via ARM handler, the maximum packet size
allowed for S800 transfers exceeds ohci1394's buffer size on platforms
where PAGE_SIZE is 4096.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:14:14 -04:00
Ben Collins
40ae6c5e88 sbp2: remove ohci1394 specific constant
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:13:49 -04:00
Ben Collins
fa9b73997c ohci1394: make phys_dma parameter read-only
Being able to switch physical DMA on and off at run time would be a nice
feature but a PITA to support by highlevel drivers and userspace apps.
Therefore allow it only to be set when the driver is being loaded.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:13:42 -04:00
Ben Collins
4611ed3803 ohci1394: set address range properties
This patch supplies the API extension introduced by patch
"ieee1394: extend lowlevel API for address range properties"
with proper addresses.

Like in patch ''ohci1394, sbp2: fix "scsi_add_device failed"
with PL-3507 based devices'', 1 TeraByte is chosen as physical
upper bound.  This leaves a window for the middle address range.
This choice is only relevant for adapters which actually have a
programmable pysical upper bound register.  (Only ALi and
Fujitsu adapters are known for this.  Most adapters have a fixed
bound at 4 GB.)  The middle address range is suitable for posted
writes.

AFAIK, PCILynx does not support physical DMA nor posted writes,
therefore no equivalent change in the pcilynx driver is necessary.
There is also a driver for GP2Lynx, although not in mainline Linux.
I assume this hardware does not support these OHCI features either.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:13:32 -04:00
Ben Collins
8aef63ff03 ieee1394: extend lowlevel API for address range properties
Host adapter hardware imposes certain restrictions and features on
address ranges.  Instead of hard-wire such ranges into the ieee1394
core or even into protocol drivers, let lowlevel drivers specify
these ranges via struct hpsb_host.

Patch "ohci1394: set address range properties" must be applied too,
else hpsb_allocate_and_register_addrspace() won't work properly.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:13:21 -04:00
Ben Collins
20f4578156 sbp2: log number of supported concurrent logins
Since this is useful information, promote it from a debug macro to
a regular log message.  The message appears only if the user set
exclusive_login=0, therefore won't clutter the logs in normal use.
Also update the comment on exclusive_login.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:13:11 -04:00
Ben Collins
fe42b05a99 sbp2: remove manipulation of inquiry response
This code became ineffective a few Linux releases ago and is not
required anyway.

Note from Christoph Hellwig: scsi_cmnd.request_buffer is always a
scatterlist these days.  Checking random bites into it and then
mangling the data in sbp2_check_sbp2_response will cause really bad
memory corruption when you're not lucky enough to have the check not
trigger by luck.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:12:59 -04:00
Ben Collins
eaf88450d2 ieee1394: save RAM by using a single tlabel for broadcast transactions
Since broadcast transactions are already complete when the request has
been sent, the same transaction label can be reused all over again, see
IEEE 1394 7.3.2.5 and 6.2.4.3.  Therefore we can reduce the footprint
of struct hpsb_host by the size of one struct hpsb_tlabel_pool.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:12:49 -04:00
Ben Collins
647dcb5fae ieee1394: support for slow links or slow 1394b phy ports
Add support for the following types of hardware:
 + nodes that have a link speed < PHY speed
 + 1394b PHYs that are less than S800 capable
 + 1394b/1394a adapter cable between two 1394b PHYs
Also, S1600 and S3200 are now supported if IEEE1394_SPEED_MAX is raised.

A probing function is added to nodemgr's config ROM fetching routine
which adjusts the allowable speed if an access problem was encountered.
Pros and Cons of the approach:
 + minimum code footprint to support this less widely used hardware
 + nearly no overhead for unaffected hardware
 - ineffective before nodemgr began to read the ROM of affected nodes
 - ineffective if ieee1394 is loaded with disable_nodemgr=1
The speed map CSRs which are published to the bus are not touched by the
patch.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Hakan Ardo <hakan@debian.org>
Cc: Calculex <linux@calculex.com>
Cc: Robert J. Kosinski <robk@cmcherald.com>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:12:37 -04:00
Ben Collins
57fdb58fa5 ieee1394/ohci1394: CycleTooLong interrupt management
This patch modifies the ohci1394.c file to enable and manage the "cycle too
long" interrupt.
If this interrupt occurs, the "LinkControl.CycleMaster" bit of the host
controller is reseted. This implies, that the host controller does not send
"cycle start" packet anymore freezing then the isochronous communication.
The management of the interrupt added by the patch is that when the interrupt
occurs, the OHCI irq handler prints a kernel log warning and then sets the
"LinkControl.CycleMaster" bit again resuming the isochronous communication.

Signed-off-by: Jean-Baptiste Mur <jeanbaptiste@maunakeatech.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:12:21 -04:00
Ben Collins
7597028a83 raw1394: fix whitespace after x86_64 compat patch
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:12:10 -04:00
Ben Collins
fa7614de60 From: Arjan van de Ven <arjan@infradead.org>
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Ben Collins <bcollins@debian.org>
Cc: Jody McIntyre <scjody@modernduck.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:11:07 -04:00
Ben Collins
4b9a334703 sbp2: make TSB42AA9 workaround specific to Momobay CX-1
The workarounds are not required for DViCO Momobay FX-3A and AFAIR not
for Momobay CX-2. These contain an TSB42AA9A but feature the same
firmware_revision value as the older DViCO Momobay CX-1.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 18:10:18 -04:00
Ben Collins
ff34d3bddf ohci1394: Remove superfluous call to free_dma_rcv_ctx,
spotted by Adrian Bunk. Also remove some superfluous comments.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 17:53:31 -04:00
Ben Collins
9bb2bcdb4b ieee1394: speed up of dma_region_sync_for_cpu
when attempting to find the 'last' part of the dma region continue the
search from where we left off, instead of starting the search over.

Signed-off-by: Jim Westfall <jwestfall@surrealistic.net>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 17:52:59 -04:00
Ben Collins
f54b1bdff1 video1394: be quiet
When working with multiple cameras and intensive applications, our logs
get flooded with video1394 information which isn't of much interest.

Any objections to demoting these messages to debug messages?

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
2006-06-12 17:52:16 -04:00
Stefan Richter
829a1985e7 [PATCH] sbp2: fix check of return value of hpsb_allocate_and_register_addrspace()
From: Stefan Richter <stefanr@s5r6.in-berlin.de>

I added a failure check in patch "sbp2: variable status FIFO address (fix
login timeout)" --- alas for a wrong error value.  This is a bug since
Linux 2.6.16.  Leads to NULL pointer dereference if the call failed, and
bogus failure handling if call succeeded.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: <stable@kernel.org>
Cc: Ben Collins <bcollins@debian.org>
Cc: Jody McIntyre <scjody@modernduck.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-05 12:29:16 -07:00
Stefan Richter
a54c9d30db [PATCH] ohci1394, sbp2: fix "scsi_add_device failed" with PL-3507 based devices
Re-enable posted writes for status FIFO.

Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x
and older, this also fixes an interoperability regression since 2.6.16:

   http://bugzilla.kernel.org/show_bug.cgi?id=6356
   (sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Vanei Heidemann <linux@javanei.com.br>
Tested-by: Martin Putzlocher <mputzi@gmx.de> (chip type unconfirmed)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-17 21:32:22 -07:00
Stefan Richter
679c0cd2dd [PATCH] sbp2: add ability to override hardwired blacklist
In case the blacklist with workarounds for device bugs yields a false
positive, the module load parameter can now also be used as an override
instead of an addition to the blacklist.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-17 21:32:22 -07:00
Stefan Richter
e9a1c52c7b [PATCH] sbp2: add read_capacity workaround for iPod
Apple decided to copy some USB stupidity over to FireWire.

The sector number returned by iPods from read_capacity is one too many.
This may cause I/O errors, especially if the kernel is configured for EFI
partition support. We use the same workaround as usb-storage but have to
check for different model IDs.

	http://marc.theaimsgroup.com/?t=114233262300001
	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187409

Acknowledgements:
  Diagnosis and therapy by Mathieu Chouquet-Stringer <ml2news@free.fr>,
  additional data about affected and unaffected Apple hardware from
  Vladimir Kotal, Sander De Graaf, Bryan Olmstead and Hugh Dixon.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-17 21:32:21 -07:00
Stefan Richter
24d3bf884e [PATCH] sbp2: consolidate workarounds
Grand unification of the three types of workarounds we have so far.

The "skip mode page 8" workaround is now limited to devices which
pretend to be of TYPE_DISK instead of TYPE_RBC. This workaround is no
longer enabled for Initio bridges.

Patch update in anticipation of more workarounds:
 - Add module parameter "workarounds".
 - Deprecate parameter "force_inquiry_hack".
 - Compose the blacklist of a compound type for better readability and
   extensibility.
 - Remove a now unused #define.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-17 21:32:21 -07:00
Stefan Richter
24c7cd0630 [PATCH] sbp2: fix spinlock recursion
sbp2util_mark_command_completed takes a lock which was already taken by
sbp2scsi_complete_all_commands.  This is a regression in Linux 2.6.15.

 Reported by Kristian Harms at
	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187394

[ More complete commentary, as response to questions by Andrew: ]

> This changes the call environment for all implementations of
> ->Current_done().  Are they all safe to call under this lock?

Short answer: Yes, trust me.  ;-) Long answer:

The done() callbacks are passed on to sbp2 from the SCSI stack along
with each SCSI command via the queuecommand hook.  The done() callback
is safe to call in atomic context.  So does
Documentation/scsi/scsi_mid_low_api.txt say, and many if not all SCSI
low-level handlers rely on this fact.  So whatever this callback does,
it is "self-contained" and it won't conflict with sbp2's internal ORB
list handling.  In particular, it won't race with the
sbp2_command_orb_lock.

Moreover, sbp2 already calls the done() handler with
sbp2_command_orb_lock taken in sbp2scsi_complete_all_commands().  I
admit this is ultimately no proof of correctness, especially since this
portion of code introduced the spinlock recursion in the first place and
we didn't realize it since this code's submission before 2.6.15 until
now.  (I have learned a lesson from this.)

I stress-tested my patch on x86 uniprocessor with a preemptible SMP
kernel (alas I have no SMP machine yet) and made sure that all code
paths which involve the sbp2_command_orb_lock were gone through multiple
times.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-02 12:58:09 -07:00
Linus Torvalds
76babde121 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (67 commits)
  [PATCH] powerpc: Remove oprofile spinlock backtrace code
  [PATCH] powerpc: Add oprofile calltrace support to all powerpc cpus
  [PATCH] powerpc: Add oprofile calltrace support
  [PATCH] for_each_possible_cpu: ppc
  [PATCH] for_each_possible_cpu: powerpc
  [PATCH] lock PTE before updating it in 440/BookE page fault handler
  [PATCH] powerpc: Kill _machine and hard-coded platform numbers
  ppc: Fix compile error in arch/ppc/lib/strcase.c
  [PATCH] git-powerpc: WARN was a dumb idea
  [PATCH] powerpc: a couple of trivial compile warning fixes
  powerpc: remove OCP references
  powerpc: Make uImage default build output for MPC8540 ADS
  powerpc: move math-emu over to arch/powerpc
  powerpc: use memparse() for mem= command line parsing
  ppc: fix strncasecmp prototype
  [PATCH] powerpc: make ISA floppies work again
  [PATCH] powerpc: Fix some initcall return values
  [PATCH] powerpc: Workaround for pSeries RTAS bug
  [PATCH] spufs: fix __init/__exit annotations
  [PATCH] powerpc: add hvc backend for rtas
  ...
2006-03-29 11:28:30 -08:00
Jody McIntyre
94c2d01a53 ohci1394: cleanup the "Unexpected PCI resource length" warning.
This warning happens in practice because the resource length reported by
the chipset is too large.  This is not actually a problem, so don't warn
about it.  If it happens to be too small, warn about that, but with
a different message so people who are used to ignoring the old message
don't.

Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28 20:04:04 -05:00
Stefan Richter
d024ebc67e sbp2: misc debug logging cleanups
- move call of scsi_print_command from sbp2_send_command to the beginning of
   sbp2_queue_command to show also commands which are not sent
 - put sbp2's name into scsi_print_sense
 - use __FUNCTION__ in log messages
 - remove a few less useful log messages and comments

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28 20:03:55 -05:00
Stefan Richter
8f0525ff19 sbp2: proper treatment of DID_OK
Sbp2 relied on DID_OK to be defined as 0. Always shift DID_OK into the right
position anyway, and explicitly return DID_OK together with CHECK_CONDITION.
Also comment on some #if 0 code. The patch does not change current behaviour.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28 20:03:45 -05:00
Stefan Richter
23e93f1742 ieee1394: set read permission for parameter disable_irm
No need to hide it from /sys/module/ieee1394/parameters/.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28 20:03:34 -05:00
Stefan Richter
556640510d sbp2: check for ARM failure
Sbp2 did not check for successful registration of the lower address range
when CONFIG_IEEE1394_SBP2_PHYS_DMA was set. If hpsb_register_addrspace
failed, a "login timed-out" would occur which is misleading. Now sbp2 logs
a sensible error message.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28 19:59:42 -05:00
Stefan Richter
180a43044f ohci1394: clean up asynchronous and physical request filters programming
Various cleanups of how ohci1394 programs AsynchronousRequestFilter,
PhysicalRequestFilter, and physUpperBoundOffset. In particular, do not
rewrite registers within the bus reset interrupt handler if bus resets
do not affect the registers in the first place.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28 19:57:34 -05:00
Stefan Richter
c1d08eb6cd ieee1394: remove amdtp remains from ieee1394_core.h
since amdtp driver was deleted

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28 19:56:45 -05:00
Stefan Richter
a8748445e5 ieee1394: remove devfs support
Devfs has been disabled in the last kernel releases, so let's
remove it from ieee1394core, raw1394, video1394, dv1394.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Dan Dennedy <dan@dennedy.org>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28 19:55:41 -05:00
Jody McIntyre
e2f8165dc3 Signed-off-by: Jody McIntyre <scjody@modernduck.com> 2006-03-28 19:55:11 -05:00
Stefan Richter
147830f297 sbp2: prevent unloading of 1394 low-level driver
When a new SBP-2 unit is added, sbp2 now takes a reference on the 1394
low-level driver (ohci1394 or pcilynx).  This prevents the 1394 host driver
module from being unloaded, e.g. by an administrative routine cleanup of
unused kernel modules or when another 1394 driver which depends on ohci1394
is unloaded.

The reference is dropped when the SBP-2 unit was disconnected, when sbp2 is
unloaded or detached from the unit, or when addition of the SBP-2 unit failed.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-03-28 19:54:52 -05:00
Benjamin Herrenschmidt
e8222502ee [PATCH] powerpc: Kill _machine and hard-coded platform numbers
This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism.  With this,
board support files can simply declare a new machine type with a
macro, and implement a probe() function that uses the flattened
device-tree to detect if they apply for a given machine.

We now have a machine_is() macro that replaces the comparisons of
_machine with the various PLATFORM_* constants.  This commit also
changes various drivers to use the new macro instead of looking at
_machine.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 23:15:54 +11:00
Akinobu Mita
37d54111c1 [PATCH] bitops: hweight() related cleanup
By defining generic hweight*() routines

- hweight64() will be defined on all architectures
- hweight_long() will use architecture optimized hweight32() or hweight64()

I found two possible cleanups by these reasons.

Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:57:15 -08:00
Andi Kleen
4bc32c4d5c [PATCH] x86_64: Implement compat code for raw1394 read/write
Not for the ioctls so far because I was too lazy.

Cc: bcollins@debian.org
Cc: dan@dennedy.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-25 09:10:54 -08:00
Alexey Dobriyan
1f050a19e1 [PATCH] video1394: fix "return E;" typo
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Ben Collins <bcollins@debian.org>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-28 20:53:43 -08:00
Stefan Richter
a80614d1ad sbp2: update 36byte inquiry workaround (fix compatibility regression)
Since about Linux 2.6.14, sbp2's inquiry workaround did not work anymore
due to changes in the SCSI layer. Update it to become effective again.
Testing one of the two known affected bridges has shown that skip_ms_page_8
is required as well.

Also, make force_inquiry_hack tunable via /sys/module/sbp2/parameters.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
(cherry picked from 99496037c6744fd938ffb8ccfc8fc91762322ff8 commit)
2006-02-23 00:29:31 -05:00
Stefan Richter
35bdddb83f sbp2: variable status FIFO address (fix login timeout)
Let the ieee1394 core select a suitable 1394 address range for sbp2's
status FIFO instead of using a fixed range. Since the core only selects
addresses which are guaranteed to be out of the "physical range" as per
OHCI 1.1, this patch also fixes an old bug:

OHCI controllers which implement a writeable PhysicalUpperBound register
included sbp2's status FIFO in the physical range. That way sbp2 was
never notified of a succesful login and always failed after timeout.
Affected OHCI host adapters include ALi and Fujitsu controllers.

As another side effect of this patch, the status FIFO is no longer
located in a range for which OHCI chips perform "posted writes". Each
status write now requires a response subaction. But since large data
transfers involve only few status writes, there is no measurable
decrease of I/O throughput. What's more, the status FIFO is now safe
from potential host bus errors. Nevertheless, posted writes could be
re-enabled by extensions to the ARM features of the 1394 stack.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
(cherry picked from b2d38cccad4ef80d6b672b8f89aae5fe2907b113 commit)
2006-02-23 00:28:52 -05:00
Stefan Richter
bf637ec3ef sbp2: fix another deadlock after disconnection
If there were commands enqueued but not completed before an SBP-2 unit
was unplugged (or an attempt to reconnect failed), knodemgrd or any
process which tried to remove the device would sleep uninterruptibly
in blk_execute_rq().  Therefore make sure that all commands are
completed when sbp2 retreats.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
(cherry picked from 61daa34c132c5d4ed8630e2c46e9bf2f0c7b3428 commit)
2006-02-23 00:25:08 -05:00
Al Viro
e30809fde5 [PATCH] don't mangle INQUIRY if cmddt or evpd bits are set
sbp2.c mangles INQUIRY response in a way that only applies to standard
inquiry data (i.e. when both cmddt and evpd bits are 0).  Leave other cases
alone; e.g. when asking for VPD the length of reply is in byte 3, not 4
and byte 4 is the first byte of device serial number.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-18 15:54:13 -05:00
Jody McIntyre
506eecde44 Actually remove amdtp.[ch], cmp.[ch].
The feature removal was done in 7301c8d3a0
but these files were not removed for some reason.

Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2006-01-16 19:21:57 -05:00
Christoph Hellwig
7ff92053dd [PATCH] don't include ioctl32.h in drivers
These days ioctl32.h is only used for communication of fs/compat.c and
fs/compat_ioctl.c and doesn't contain anything of interest to drivers.

Remove inclusion in various drivers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:34 -08:00
Dave Jones
8c1d286e6a [PATCH] don't freeze firewire on suspend.
We had a report from one loony user who tried out suspend to disk using a
swap partition on a firewire drive.  As the firewire thread was put to
sleep it didn't work out too well.

Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ben Collins <bcollins@debian.org>
Cc: Jody McIntyre <scjody@modernduck.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:43 -08:00
Jody McIntyre
0a75c23a00 Merge with http://kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2006-01-05 08:03:40 -05:00
Linus Torvalds
db9edfd7e3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6
Trivial manual merge fixup for usb_find_interface clashes.
2006-01-04 18:44:12 -08:00
Linus Torvalds
25c862cc9e Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild 2006-01-04 16:36:52 -08:00
Kay Sievers
312c004d36 [PATCH] driver core: replace "hotplug" by "uevent"
Leave the overloaded "hotplug" word to susbsystems which are handling
real devices. The driver core does not "plug" anything, it just exports
the state to userspace and generates events.

Signed-off-by: Kay Sievers <kay.sievers@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:08 -08:00
Brian Gerst
352dd1df32 gitignore: misc files
Ignore all files generated from *_shipped files, plus a few others.

Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-01-01 22:21:50 +01:00
Stefan Richter
eaceec7f6c sbp2: remove duplicate code from sbp2_start_device()
Use sbp2_remove_device() to free FIFO and ORB DMAs in a failure case.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-13 11:05:05 -05:00
Stefan Richter
cf8d2c0965 sbp2: split sbp2_create_command_orb() for better readability
sbp2_create_command_orb() code cleanup:
 - add two helper functions to reduce nesting depth
 - omit the return value which was always ignored
 - remove unnecessary declaration from sb2.h

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-13 11:05:03 -05:00
Stefan Richter
209171a17a ohci1394: log number of implemented isochronous contexts
Print the number of IR and IT contexts which a hardware implements
as an informational log message when ohci1394 initializes.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-13 11:05:00 -05:00
Stefan Richter
d51e86c18a ieee1394: write broadcast_channel only to select nodes (fixes device recognition)
Some old 1394-1995 SBP-2 bridges would hang if they received a broadcast write
request to BROADCAST_CHANNEL before the config ROM was read.  Affected devices
include Datafab MD2-FW2 2.5" HDD and SmartDisk VST FWCDRW-V8 portable CD writer.
The write request is now directed to specific nodes instead of being broadcast
to all nodes at once, and it is only performed if a previous read request at
this register succeeded.

Fixes an old interoperability problem which was perceived as a 2.6.14-specific
regression: http://marc.theaimsgroup.com/?t=113190586800003

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
(cherry picked from 61c7f775ca commit)
2005-12-12 23:21:12 -05:00
Stefan Richter
48622b7bde ieee1394: resume remote ports when starting a host (fixes device recognition)
After initializing an IEEE 1394 host, broadcast a resume packet.  This makes
remote nodes visible which suspended their ports while the host was down.
Such nodes had to be unplugged and replugged in order to be recognized.

Motorola DCT6200 cable reciever was affected, probably other devices too.
http://marc.theaimsgroup.com/?t=113202715800001

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
(cherry picked from 14c0fa243b commit)
2005-12-12 23:20:58 -05:00
Stefan Richter
dc3edd5412 sbp2: did not clean up after scsi_add_device() failed
If scsi_add_device() at the end of sbp2_start_device() fails, e.g. due to
transport errors during SCSI inquiry, sbp2 needs to log out of the device
and release all associated resources.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-12 23:03:30 -05:00
Stefan Richter
43863eba76 sbp2: delete sbp2scsi_direction_table
DMA_BIDIRECTIONAL data direction may be handled properly by Linux in the
future.  For now, reject it instead to convert it to another direction.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-12 23:03:24 -05:00
Stefan Richter
51c1d80e92 ieee1394: run high-level updates before high-level probes
After a bus reset, let nodemgr call high-level update hooks first for nodes
which do not need to be probed.  The main benefit is for a bus with more
than one SBP-2 device:  SBP-2 reconnects will be performed before SBP-2
logins, thus have a much higher chance to succeed, and their SCSI devices
will not be blocked much longer than necessary.  This was demonstrated for
Linux 2.4 by Dave Cinege a while ago.

A better approach would be to perform time-consuming probes in parallel by a
subthread.  I actually plan to implement this for sbp2 but it may take a
while to get that done and tested.  Until then, this tweak is a huge
improvement for users with multiple SBP-2 devices.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-12 23:03:19 -05:00
Stefan Richter
e38dc0ae24 ieee1394: remove nonexistent functions from nodemgr.h
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-05 16:29:02 -05:00
Stefan Richter
61c7f775ca ieee1394: write broadcast_channel only to select nodes (fixes device recognition)
Some old 1394-1995 SBP-2 bridges would hang if they received a broadcast write
request to BROADCAST_CHANNEL before the config ROM was read.  Affected devices
include Datafab MD2-FW2 2.5" HDD and SmartDisk VST FWCDRW-V8 portable CD writer.
The write request is now directed to specific nodes instead of being broadcast
to all nodes at once, and it is only performed if a previous read request at
this register succeeded.

Fixes an old interoperability problem which was perceived as a 2.6.14-specific
regression: http://marc.theaimsgroup.com/?t=113190586800003

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-05 16:28:59 -05:00
Stefan Richter
741854e4f9 ieee1394: whitespace cleanup in hosts.[ch], ieee1394_core.[ch]
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-01 18:52:03 -05:00
Stefan Richter
546513f9fd ieee1394: hpsb_send_phy_config() cleanup
Eliminate some code in hpsb_send_phy_config() which is provided
by hpsb_make_phypacket().

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-01 18:52:01 -05:00
Stefan Richter
d7758461b9 ieee1394: add definitions for phy packet constants
Introduce new macros related to phy packets and use them in ieee1394_core and
nodemgr.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-01 18:51:56 -05:00
Stefan Richter
14c0fa243b ieee1394: resume remote ports when starting a host (fixes device recognition)
After initializing an IEEE 1394 host, broadcast a resume packet.  This makes
remote nodes visible which suspended their ports while the host was down.
Such nodes had to be unplugged and replugged in order to be recognized.

Motorola DCT6200 cable reciever was affected, probably other devices too.
http://marc.theaimsgroup.com/?t=113202715800001

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-12-01 18:51:52 -05:00
Jens-Michael Hoffmann
c64d472abc ieee1394/raw1394: LIndent fixes
This patch contains fixes by LIndent.

Signed-off-by: Jens-Michael Hoffmann <jensmh@gmx.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-22 12:37:10 -05:00
Jens-Michael Hoffmann
066ef9c2fb ieee1394/iso: LIndent fixes
This patch contains fixes by LIndent.

Signed-off-by: Jens-Michael Hoffmann <jensmh@gmx.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-22 12:35:23 -05:00
Jens-Michael Hoffmann
16c333a34a ieee1394/ieee1394_transactions: LIndent fixes
This patch contains fixes by LIndent.

Signed-off-by: Jens-Michael Hoffmann <jensmh@gmx.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-22 12:34:16 -05:00
Jens-Michael Hoffmann
6649e92d79 ieee1394/dma: LIndent fixes
This patch contains fixes by LIndent.

Signed-off-by: Jens-Michael Hoffmann <jensmh@gmx.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-22 12:18:28 -05:00
Jody McIntyre
a96074e76f csr1212: add check for !valid
Don't read the keyval if there's already a valid one in place.  May not be
necessary but shouldn't hurt.

Signed-off-by: Jody McIntyre <scjdy@steamballoon.com>
2005-11-22 12:17:14 -05:00
Jody McIntyre
5303a986c3 csr1212: check results of keyval reads
csr1212_parse_csr() did not properly check return values when reading
keyvals.  Fix this by using _csr1212_read_keyval() instead of
csr1212_get_keyval() and checking the return code.

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
2005-11-22 12:17:11 -05:00
Stefan Richter
b12479ddce raw1394: fix memory deallocation in modify_config_rom
raw1394: use correct deallocation macro for CSR cache

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-21 17:32:18 -05:00
Adrian Bunk
d734f92b0d drivers/ieee1394/raw1394.c: fix a NULL pointer
The coverity checker spotted that this was a NULL pointer dereference in
the "if (copy_from_user(...))" case since the next step is to
kfree(cache->filled_head).

There's no need to free cache at this point, and it's getting free'd
later.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-21 17:32:14 -05:00
Stefan Richter
977545e352 sbp2: slimmer interface to scsi_mod
- sbp2scsi_reset does not need to take host_lock
- sbp2scsi_reset, as our device reset handler, does not need to stand in as
  bus reset or host reset handler
- let scsi_mod use scsi_host_template.name instead of .info
  (sbp2 is not an emulation anway)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-19 21:35:22 -05:00
Damien Douxchamps
e4cda1654e Fix incorrect video1394 timestamps.
This patch fixes the incoherent timestamps generated by video1394 since
the single-buffer patch was applied in 2.6.11. Credits have also been
removed from the header and a "//" comment was changed to "/* */".

Signed-off-by: Damien Douxchamps <ddouxchamps@users.sf.net>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-19 21:32:03 -05:00
Adrian Bunk
e27d3014f3 Every file should #include the headers containing the prototypes for
it's global functions.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-19 21:23:48 -05:00
Jody McIntyre
963f48a116 sbp2_command_orb_lock must be held when accessing the _orb_inuse list.
Fixes an oops in sbp2util_find_command_for_SCpnt after sbp2scsi_abort:
https://bugzilla.novell.com/show_bug.cgi?id=113734

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
(cherry picked from 7945619794 commit)
2005-11-18 16:41:39 -05:00
Jody McIntyre
a9931a6e37 Merge with http://kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-11-18 00:18:25 -05:00
Jody McIntyre
7301c8d3a0 Remove amdtp, cmp drivers.
Remove the Audio and Music Data Transmission Protocol driver and the
Connection Management Procedures driver.  These are incomplete, have never
worked, and are better implemented in userland via raw1394 (see
http://freebob.sourceforge.net/ for example.)

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Adrian Bunk <bunk@stusta.de>
2005-11-18 00:16:26 -05:00
Nishanth Aravamudan
4de4ebc6d8 [PATCH] ieee1394: fix-up schedule_timeout() usage
Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:57 -08:00
Stefan Richter
ef797546a9 Remove definitions of unreferenced macros virt_to_page and vmalloc_32 from
dv1394 and video1394.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07 06:31:50 -05:00
Stefan Richter
8551158abc kmalloc/kzalloc changes:
dv1394, eth1394, ieee1394, ohci1394, pcilynx, raw1394, sbp2c, video1394:
 - use kzalloc
 - provide safer size arguments to kmalloc and kzalloc
 - omit some casts

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07 06:31:45 -05:00
Stefan Richter
7afa146776 Remove version strings from eth1394, ohci1394, sbp2.
Their version information is not trustworthy.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07 06:31:42 -05:00
Stefan Richter
a237f35fdd sbp2, ohci1394 cleanups:
sbp2: various code formatting cleanups
ohci1394: remove form feed characters

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07 06:31:39 -05:00
Ben Collins
e309fc6d71 sbp2: Remove our tracking of device type,
since we no longer need to worry about it.
Depends on patch "ieee1394: remove sbp2's TYPE_RBC and 10byte handling".

Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07 06:31:34 -05:00
Ben Collins
365c786f0b sbp2: Merge TYPE_RBC and 10byte removal patch from scsi maintainers.
Added more cleanups to remove unused code.

Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
2005-11-07 06:31:24 -05:00
Jody McIntyre
7945619794 sbp2_command_orb_lock must be held when accessing the _orb_inuse list.
Fixes an oops in sbp2util_find_command_for_SCpnt after sbp2scsi_abort:
https://bugzilla.novell.com/show_bug.cgi?id=113734

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2005-11-07 06:29:39 -05:00
Greg KH
6fbfddcb52 Merge ../bleed-2.6 2005-10-28 10:13:16 -07:00
Russell King
9480e307cd [PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacks
In PM v1, all devices were called at SUSPEND_DISABLE level.  Then
all devices were called at SUSPEND_SAVE_STATE level, and finally
SUSPEND_POWER_DOWN level.  However, with PM v2, to maintain
compatibility for platform devices, I arranged for the PM v2
suspend/resume callbacks to call the old PM v1 suspend/resume
callbacks three times with each level in order so that existing
drivers continued to work.

Since this is obsolete infrastructure which is no longer necessary,
we can remove it.  Here's an (untested) patch to do exactly that.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:56 -07:00
Greg Kroah-Hartman
53f4654272 [PATCH] Driver Core: fix up all callers of class_device_create()
The previous patch adding the ability to nest struct class_device
changed the paramaters to the call class_device_create().  This patch
fixes up all in-kernel users of the function.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:52 -07:00
Al Viro
b4e3ca1ab1 [PATCH] gfp_t: remaining bits of drivers/*
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:51 -07:00
Andy Wingo
4a9949d7ac [PATCH] raw1394: fix locking in the presence of SMP and interrupts
Changes all spinlocks that can be held during an irq handler to disable
interrupts while the lock is held.  Changes spin_[un]lock_irq to use the
irqsave/irqrestore variants for robustness and readability.

In raw1394.c:handle_iso_listen(), don't grab host_info_lock at all -- we're
not accessing host_info_list or host_count, and holding this lock while
trying to tasklet_kill the iso tasklet this can cause an ABBA deadlock if
ohci:dma_rcv_tasklet is running and tries to grab host_info_lock in
raw1394.c:receive_iso.  Test program attached reliably deadlocks all SMP
machines I have been able to test without this patch.

Signed-off-by: Andy Wingo <wingo@pobox.com>
Acked-by: Ben Collins <bcollins@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19 23:04:30 -07:00
Al Viro
dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Jody McIntyre
32e7a04faa [PATCH] ohci1394: less noise in dmesg
less noise in dmesg

Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:20 -07:00
Jody McIntyre
f31c9cf3bd [PATCH] ieee1394: delete legacy module aliases
amdtp, dv1394, raw1394, video1394:

Delete legacy module aliases.  The macros did not work and the aliases are not
needed nowadays.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre
3ae3d0d4ae [PATCH] eth1394: workaround limitation in rawiso routines
Work around limitation in rawiso routines.  Required with 1394b cards on
architectures where PAGE_SIZE is 4096.  Based on a previous patch by Ben
Collins.

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre
998150c3d3 [PATCH] ieee1394: remove superfluous include in csr1212
Remove superfluous include.

Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre
3256cc1398 [PATCH] ieee1394: trivial edits of a few comments
trivial edits of a few comments

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre
63bea35036 [PATCH] ieee1394: use time_before()
Use of time_before() macro, defined at linux/jiffies.h, which deal with
wrapping correctly and are nicer to read.

Signed-off-by: Marcelo Feitoza Parisi <marcelo@feitoza.com.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre
db2fd664f8 [PATCH] ieee1394: fix for debug output
Fix debug code so it prints the correct speed (was defaulting to 100, so
anything > 400 showed only 100).

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@debian.org>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre
e31a127c2f [PATCH] ieee1394: skip unnecessary pause when scanning config ROMs
Skip a superfluous pause that occured when the config ROM of a node was
scanned unsuccessfully.  This also occurs if a node without link wrongly
enables its "link active" self ID flag.  A GWCTech 6-port hub does this.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre
328699bf0f [PATCH] ieee1394: reorder activities after bus reset (fixes device detection)
Units were not detected if the local IRM performed a bus reset.  ("The root
node is not cycle master capable; selecting a new root node and resetting...",
often seen with iPods and other SBP-2 devices).  Rearrange the order of IRM
duties and node scanning.  TODO: Audit the ROM caching and parsing code for
underlying issues.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre
2bab359a50 [PATCH] sbp2: default to serialize_io=1
Set serialize_io=1 by default.  This is safer and required by seemingly more
and more hardware.  It causes little or no performance loss for S400 devices.
Performance of S800 1394b devices may drop by 25...30%.  Therefore make the
parameter's description and dmesg message clearer about performance impact.

Update description of the max_speed parameter too.  IEEE1394_SPEED_MAX is
currently S800.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:19 -07:00
Jody McIntyre
abd559b105 [PATCH] sbp2: fix deadlocks and delays on device removal/rmmod
Fixes for deadlocks of the ieee1394 and scsi subsystems and long delays in
futile error recovery attempts when SBP-2 devices are removed or drivers are
unloaded.

 - Complete commands quickly with DID_NO_CONNECT if the 1394 node is gone or if
   the 1394 low-level driver was unloaded.
 - Skip unnecessary work in the eh_abort_handler and eh_device_reset_handler if
   the node or 1394 low-level driver is gone.
 - Let scsi's high-level shut down gracefully when sbp2 is being unloaded or
   detached from the 1394 unit. A call to scsi_remove_device is added for this
   purpose, which requires us to store a scsi_device pointer.
 - scsi_device pointer is obtained from slave_alloc hook and cleared by
   slave_destroy. This avoids usage of the pointer after the scsi device was
   deleted e.g. by the user via scsi_mod's sysfs interface.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@steamballoon.com>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 12:41:18 -07:00
Linus Torvalds
35d91f75c2 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 2005-09-12 20:02:18 -07:00
James Bottomley
146f7262ee [SCSI] Alter the scsi_add_device() API to conform to what users expect
The original API returned either an ERR_PTR() or a refcounted sdev.
Unfortunately, if it's successful, you need to do a scsi_device_put() on
the sdev otherwise the refcounting is wrong.

Everyone seems to expect that scsi_add_device() should be callable
without doing the ref put, so alter the API so it is (we still have
__scsi_add_device with the original behaviour).

The only actual caller that needs altering is the one in firewire ...
not because it gets this right, but because it acts on the error if one
is returned.

Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-10 14:43:25 -05:00