Commit Graph

16 Commits

Author SHA1 Message Date
Matt Fleming
035ca59fe8 sh: Use correct mask when comparing PMB DATA array values
Previously we were masking the PMB DATA array values with the value of
__MEMORY_START | PMB_V, which misses some PFN bits off the mask.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
2010-04-25 20:44:23 +01:00
Paul Mundt
4a6feab0ee sh: __cpuinit annotate the CPU init path.
All of the regular CPU init path needs to be __cpuinit annotated for CPU
hotplug.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-21 12:20:42 +09:00
Paul Mundt
d01447b319 sh: Merge legacy and dynamic PMB modes.
This implements a bit of rework for the PMB code, which permits us to
kill off the legacy PMB mode completely. Rather than trusting the boot
loader to do the right thing, we do a quick verification of the PMB
contents to determine whether to have the kernel setup the initial
mappings or whether it needs to mangle them later on instead.

If we're booting from legacy mappings, the kernel will now take control
of them and make them match the kernel's initial mapping configuration.
This is accomplished by breaking the initialization phase out in to
multiple steps: synchronization, merging, and resizing. With the recent
rework, the synchronization code establishes page links for compound
mappings already, so we build on top of this for promoting mappings and
reclaiming unused slots.

At the same time, the changes introduced for the uncached helpers also
permit us to dynamically resize the uncached mapping without any
particular headaches. The smallest page size is more than sufficient for
mapping all of kernel text, and as we're careful not to jump to any far
off locations in the setup code the mapping can safely be resized
regardless of whether we are executing from it or not.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-18 18:13:51 +09:00
Paul Mundt
9edef28653 sh: uncached mapping helpers.
This adds some helper routines for uncached mapping support. This
simplifies some of the cases where we need to check the uncached mapping
boundaries in addition to giving us a centralized location for building
more complex manipulation on top of.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 16:28:00 +09:00
Paul Mundt
51becfd962 sh: PMB tidying.
Some overdue cleanup of the PMB code, killing off unused functionality
and duplication sprinkled about the tree.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 15:33:30 +09:00
Paul Mundt
3125ee72dc sh: Track the uncached mapping size.
This provides a variable for tracking the uncached mapping size, and uses
it for pretty printing the uncached lowmem range. Beyond this, we'll also
be building on top of this for figuring out from where the remainder of
P2 becomes usable when constructing unrelated mappings.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-21 15:54:31 +09:00
Paul Mundt
2023b843d7 sh: Rework P2 to only include kernel text.
This effectively neutralizes P2 by getting rid of P1 identity mapping
for all available memory and instead only establishes a single unbuffered
PMB entry (16MB -- the smallest available) that covers the kernel.

As using segmentation for abusing caching attributes in drivers is no
longer supported (and there are no drivers that can be enabled in 32-bit
mode that do this), this provides us with all of the uncached access
needs by the kernel itself.

Drivers and their ilk need to specify their caching attributes when
remapping through page tables, as usual.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-21 15:42:58 +09:00
Paul Mundt
77c2019fc1 sh: initial PMB mapping iteration by helper macro.
All of the cached/uncached mapping setup is duplicated for each size, and
also misses out on the 16MB case. Rather than duplicating the same iter
code for that we just consolidate it in to a helper macro that builds an
iter for each size. The 16MB case is then trivially bolted on at the end.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-21 14:19:41 +09:00
Matt Fleming
3d467676ab sh: Setup early PMB mappings.
More and more boards are going to start shipping that boot with the MMU
in 32BIT mode by default. Previously we relied on the bootloader to
setup PMB mappings for use by the kernel but we also need to cater for
boards whose bootloaders don't set them up.

If CONFIG_PMB_LEGACY is not enabled we have full control over our PMB
mappings and can compress our address space. Usually, the distance
between the the cached and uncached mappings of RAM is always 512MB,
however we can compress the distance to be the amount of RAM on the
board.

pmb_init() now becomes much simpler. It no longer has to calculate any
mappings, it just has to synchronise the software PMB table with the
hardware.

Tested on SDK7786 and SH7785LCR.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-18 19:33:10 +09:00
Paul Mundt
a0ab36689a sh: fixed PMB mode refactoring.
This introduces some much overdue chainsawing of the fixed PMB support.
fixed PMB was introduced initially to work around the fact that dynamic
PMB mode was relatively broken, though they were never intended to
converge. The main areas where there are differences are whether the
system is booted in 29-bit mode or 32-bit mode, and whether legacy
mappings are to be preserved. Any system booting in true 32-bit mode will
not care about legacy mappings, so these are roughly decoupled.

Regardless of the entry point, PMB and 32BIT are directly related as far
as the kernel is concerned, so we also switch back to having one select
the other.

With legacy mappings iterated through and applied in the initialization
path it's now possible to finally merge the two implementations and
permit dynamic remapping overtop of remaining entries regardless of
whether boot mappings are crafted by hand or inherited from the boot
loader.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-13 18:31:48 +09:00
Matt Fleming
b336f124b1 sh: CONFIG_PMB doesn't mean the MMU is in 32bit mode
CONFIG_PMB will eventually allow the MMU to be switched between 29-bit
and 32-bit mode dynamically at runtime.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10 21:51:23 +09:00
Tim Abbott
bbe215c231 sh: convert to use __HEAD and HEAD_TEXT macros.
This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-26 09:20:39 -07:00
Paul Mundt
740a3e677b sh: Enable skipping of bss on debug platforms for sh32 also.
This enables the same functionality that sh64 has for sh32. When running
on simulated hardware or via remote memory via the debug interface,
memory is gauranteed to be zero on boot already, and skipping the zeroing
of BSS has measurable boot time benefits.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:47 +09:00
Paul Mundt
972ad0e0d5 sh: disable initrd defaults in .empty_zero_page.
When using initramfs on systems that don't explicitly clear LOADER_TYPE,
unpack_to_rootfs() tramples tramples the range with the defaults taken
out of .empty_zero_page. This causes kernels with valid initramfs images
to bail out with crc or gzip magic mismatch errors after the second
unpack takes place on certain platform configurations.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16 14:55:07 +09:00
Stuart Menefy
7a2eacb759 sh: Provide a 29/32-bit physical hint for bootloaders.
Shoves a magic word in to the empty_zero_page section for the
bootloader to work out whether to start the kernel in 29-bit
or 32-bit mode.

[ Renesas CPUs already take care of the initial PMB mappings entirely
  in hardware and decide on 29-bit/32-bit physical depending on which
  pin powered up the CPU, so this is mostly for ST parts. -- PFM ].

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:57 +09:00
Paul Mundt
959f7d587e sh: Move over the SH-5 head.S and tlb.h.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:44 +09:00