Commit Graph

217 Commits

Author SHA1 Message Date
Matthew Wilcox
a76117dfd6 x86: Use pci_claim_resource
Instead of open-coding pci_find_parent_resource and request_resource,
just call pci_claim_resource.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 14:04:42 -07:00
Linus Torvalds
f0d5e12bd4 Merge branch 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (76 commits)
  x86, apic: Fix dummy apic read operation together with broken MP handling
  x86, apic: Restore irqs on fail paths
  x86: Print real IOAPIC version for x86-64
  x86: enable_update_mptable should be a macro
  sparseirq: Allow early irq_desc allocation
  x86, io-apic: Don't mark pin_programmed early
  x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled
  x86, irq: update_mptable needs pci_routeirq
  x86: don't call read_apic_id if !cpu_has_apic
  x86, apic: introduce io_apic_irq_attr
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix
  x86: read apic ID in the !acpi_lapic case
  x86: apic: Fixmap apic address even if apic disabled
  x86: display extended apic registers with print_local_APIC and cpu_debug code
  x86: read apic ID in the !acpi_lapic case
  x86: clean up and fix setup_clear/force_cpu_cap handling
  x86: apic: Check rev 3 fadt correctly for physical_apic bit
  x86/pci: update pirq_enable_irq() to setup io apic routing
  x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
  ...
2009-06-10 15:25:41 -07:00
Yinghai Lu
75e613cdc7 x86/pci: fix mmconfig detection with 32bit near 4g
Pascal reported and bisected a commit:
|	x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case

which broke one system system.

ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space

it didn't have
PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
anymore, and try to use 0xf000000 - 0xffffffff for mmconfig

For 32bit, mcfg_res->end could be 32bit only (if 64 resources aren't used)
So use end - 1 to pass the value in mcfg->end to avoid overflow.

We don't need to worry about the e820 path, they are always 64 bit.

Reported-by: Pascal Terjan <pterjan@mandriva.com>
Bisected-by: Pascal Terjan <pterjan@mandriva.com>
Tested-by: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-04 11:31:13 +01:00
Yinghai Lu
e5198075c6 x86, apic: introduce io_apic_irq_attr
according to Ingo, io_apic irq-setup related functions have too many
parameters with a repetitive signature.

So reduce related funcs to get less params by passing a pointer
to a newly defined io_apic_irq_attr structure.

v2: io_apic_irq ==> irq_attr
    triggering ==> trigger

v3: add set_io_apic_irq_attr

[ Impact: cleanup ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A08ACD3.2070401@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 08:38:55 +02:00
Ingo Molnar
6cda3eb62e Merge branch 'x86/apic' into irq/numa
Merge reason: both topics modify the APIC code but were able to do it in
              parallel so far. An upcoming patch generates a conflict so
              merge them to avoid the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 12:17:36 +02:00
Yinghai Lu
b9c61b7007 x86/pci: update pirq_enable_irq() to setup io apic routing
So we can set io apic routing only when enabling the device irq.

This is advantageous for IRQ descriptor allocation affinity: if we set up
the IO-APIC entry later, we have a chance to allocate the IRQ descriptor
later and know which device it is on and can set affinity accordingly.

[ Impact: standardize/enhance irq-enabling sequence for mptable irqs ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A01C46E.8000501@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:10 +02:00
Yinghai Lu
e20c06fd69 x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing().

[ Impact: extend function call API to prepare for new functionality ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A01C406.2040303@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:09 +02:00
Yinghai Lu
b10ceb5530 x86/PCI: don't bother with root quirks if _CRS is used
It will be overwriten later if _CRS is used, so don't bother to set it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 15:06:29 -07:00
Yinghai Lu
0e94ecd098 x86/PCI: set_pci_bus_resources_arch_default cleanups
Rename set_pci_bus_resources_arch_default to x86_pci_root_bus_res_quirks, move
the weak version from common.c to i386.c, and before calling, make sure it's a
root bus.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 14:47:46 -07:00
Matthew Wilcox
0bb1be3e30 x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86
Commit 30a18d6c3f introduced a new
function to set the PCI bus resources.  Unfortunately, neither the
author, nor the committers seemed to know that we already have somewhere
to do that -- pcibios_fixup_bus().  This patch moves the hook (used only
by the K8 code) into x86-specific code where it should have been in the
first place.

Cc: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 13:57:36 -07:00
Yinghai Lu
044cd80942 x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case
e820_all_mapped need end is (addr + size) instead of (addr + size - 1)

Cc: stable@kernel.org
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 13:56:26 -07:00
Suresh Siddha
5a3ae27605 x86, PAT: Remove duplicate memtype reserve in pci mmap
pci mmap code was doing memtype reserve for a while now. Recently we
added memtype tracking in remap_pfn_range, and pci code indirectly calls
remap_pfn_range. So, we don't need seperate tracking in pci code
anymore. Which means a patch that removes ~50 lines of code :-).

Also, recently we found out that the pci tracking is not working as we expect
it to work in some cases. Specifically, userlevel X mmap of pci, with some
recent version of X, is having a problem with vm_page_prot getting reset.
The pci tracking uses vm_page_prot to pass on the protection type from parent
to child during fork.
a) Parent does a pci mmap
b) We look at PAT and get either UC_MINUS or WC mapping for parent
c) Store that mapping type in vma vm_page_prot for future use
d) This thread does a fork
e) Fork results in mmap_ops ->open for the child process
f) We get the vm_page_prot from vma and reserve that type for the child process

But, between c) and e) above, the vma vm_page_prot is getting reset to zero.
This results in PAT reserve failing at the time of fork as in here.
http://marc.info/?l=linux-kernel&m=123858163103240&w=2

This cleanup makes the above problem go away as we do not depend on
vm_page_prot in our PAT code anymore.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-03 14:43:29 -07:00
Linus Torvalds
e76e5b2c66 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
2009-04-01 09:47:12 -07:00
Yinghai Lu
e42d1fe804 x86/PCI: make pci=lastbus=255 work when acpi is on
Impact: scan more peer root buses even acpi is used

Move pci_bios_fixup_peer_bridges out of pci_legacy_init and into
pci_subsys_init.  This allows pci_bios_fixup_peer_bridges to be called
even pci_apci_init is driving PCI initialization.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-26 16:07:49 -07:00
Pallipadi, Venkatesh
9cdec04938 x86, PAT, PCI: Change vma prot in pci_mmap to reflect inherited prot
While looking at the issue in the thread:

  http://marc.info/?l=dri-devel&m=123606627824556&w=2

noticed a bug in pci PAT code and memory type setting.

PCI mmap code did not set the proper protection in vma, when it
inherited protection in reserve_memtype. This bug only affects
the case where there exists a WC mapping before X does an mmap
with /proc or /sys pci interface. This will cause X userlevel
mmap from /proc or /sysfs to fail on fork.

Reported-by: Kevin Winchester <kjwinchester@gmail.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: <stable@kernel.org>
LKML-Reference: <20090323190720.GA16831@linux-os.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24 10:42:35 +01:00
Yinghai Lu
068258bc15 x86/PCI: host mmconfig detect clean up
Fix mmconfig detection to not assume a single mmconfig space in the
northbridge, paving the way for AMD fam10h + mcp55 CPUs.  On those, the
MSR has some range, but the mcp55 pci config will have another one.

Also helps the mcp55 + io55 case, where every one will have one range.

If it is mcp55, exclude the range that is used by CPU MSR, in other
words , if the CPU claims busses 0-255, the range in mcp55 is dropped,
because CPU HW will not route those ranges to mcp55 mmconfig to handle
it.

Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 11:40:22 -07:00
Ed Swierk
5546d6f568 x86/PCI: Detect mmconfig on nVidia MCP55
Detect and enable memory-mapped PCI configuration space on the nVidia
MCP55 southbridge.  Tested against 2.6.27.4 on an Arista Networks
development board with one MCP55, Coreboot firmware, no ACPI.

Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 11:34:37 -07:00
Yinghai Lu
dfadd9edff PCI/x86: detect host bridge config space size w/o using quirks
Many host bridges support a 4k config space, so check them directy
instead of using quirks to add them.

We only need to do this extra check for host bridges at this point,
because only host bridges are known to have extended address space
without also having a PCI-X/PCI-E caps.  Other devices with this
property could be done with quirks (if there are any).

As a bonus, we can remove the quirks for AMD host bridges with family
10h and 11h since they're not needed any more.

With this patch, we can get correct pci cfg size of new Intel CPUs/IOHs
with host bridges.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:17 -07:00
Bjorn Helgaas
7bc9e77dcc PCI/x86: format early dump like other PCI output
Use %02x:%02x.%d rather than %02x:%02x:%02x so PCI addresses
look the same as in other parts of the kernel.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19 19:29:18 -07:00
Bjorn Helgaas
600914ba52 PCI/x86: make early dump handle multi-function devices
The early "dump PCI config space" code skips many multi-function
devices.  This patch fixes that, so it dumps all devices in PCI
domain 0.

We should not skip the rest of the functions if CLASS_REVISION is
0xffffffff.  Often multi-function devices have gaps in the function ID
space, e.g., 1c.0 and 1c.2 exist but 1c.1 doesn't.  The CLASS_REVISION
of the non-existent 1c.1 function will appear to be 0xffffffff.

We should only look at the HEADER_TYPE of function zero.  Often the
"multi-function" is set in function zero, but not in other functions.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19 19:29:18 -07:00
Jan Beulich
821508d4ef x86: move a few device initialization objects into .devinit.rodata
Impact: debuggability and micro-optimization

Putting whatever is possible into the (final) .rodata section increases
the likelihood of catching memory corruption bugs early, and reduces
false cache line sharing.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <49B909A5.76E4.0078.0@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12 13:12:19 +01:00
Ingo Molnar
7b6aa335ca x86, apic: remove genapic.h
Impact: cleanup

Remove genapic.h and remove all references to it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 17:52:44 +01:00
Ingo Molnar
4f179d1218 x86, numaq: cleanups
Also move xquad_portio over to where it's allocated.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 22:30:14 +01:00
Ingo Molnar
9d45cf9e36 Merge branch 'x86/urgent' into x86/apic
Conflicts:
	arch/x86/mach-default/setup.c

Semantic merge:
	arch/x86/kernel/irqinit_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 22:30:01 +01:00
Ingo Molnar
1164dd0099 x86: move mach-default/*.h files to asm/
We are getting rid of subarchitecture support - move the hook files
to asm/. (These are now stale and should be replaced with more explicit
runtime mechanisms - but the transition is simpler this way.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-29 14:16:51 +01:00
Ingo Molnar
5a44632f77 x86, numaq: consolidate code
Move all the NUMAQ subarch definitions into numaq.c. With this it
ceases to depend on build-time subarch features.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 23:20:37 +01:00
Seth Heasley
57064d213d PCI: irq and pci_ids patch for Intel Tigerpoint DeviceIDs
This patch adds the Intel Tigerpoint LPC Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 09:46:08 -08:00
venkatesh.pallipadi@intel.com
afc7d20c84 x86 PAT: consolidate old memtype new memtype check into a function
Impact: cleanup

Move the new memtype old memtype allowed check to header so that is can be
shared by other users. Subsequent patch uses this in pat.c in remap_pfn_range()
code path. No functionality change in this patch.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-13 19:13:00 +01:00
Rafael J. Wysocki
16cf0ebc35 x86/PCI: Do not use interrupt links for devices using MSI-X
pcibios_enable_device() and pcibios_disable_device() don't handle
IRQs for devices that have MSI enabled and it should treat the
devices with MSI-X enabled in the same way.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:25 -08:00
Bjorn Helgaas
2b8c2efe44 x86/PCI: use dev_printk for PCI bus locality messages
Since pci_bus has a struct device, use dev_printk directly instead
of faking it by hand.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:19 -08:00
Bjorn Helgaas
904d6a3033 PCI: x86/visws: use generic INTx swizzle from PCI core
Use the generic pci_common_swizzle() instead of arch-specific code.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:16 -08:00
Bjorn Helgaas
b1c86792a0 PCI: x86: use generic pci_swizzle_interrupt_pin()
Use the generic pci_swizzle_interrupt_pin() instead of arch-specific code.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:54 -08:00
Bjorn Helgaas
12b955ff63 x86/PCI: minor logic simplications
Test "pin" immediately to simplify the subsequent code.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:49 -08:00
Bjorn Helgaas
f672c392b9 x86/PCI: use config space encoding for interrupt pins
Keep "pin" encoded as it is in the "Interrupt Pin" value in PCI config
space, i.e., 0=device doesn't use interrupts, 1=INTA, ..., 4=INTD.

This makes the bridge INTx swizzle match other architectures.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:49 -08:00
Bjorn Helgaas
878f2e50fd PCI: use config space encoding in pci_get_interrupt_pin()
This patch makes pci_get_interrupt_pin() return values encoded
the same way as the "Interrupt Pin" value in PCI config space,
i.e., 1=INTA, ..., 4=INTD.

pirq_bios_set() is the only in-tree caller of pci_get_interrupt_pin()
and pci_get_interrupt_pin() is not exported.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: hpa@zytor.com
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:48 -08:00
Jacob Pan
23a3600274 PCI: avoid early PCI mmconfig init if pci=noearly is given in cmdline
Early type 1 accesses can cause problems on some platforms, and
pci=noearly is supposed to prevent them from occurring.  However, early
mcfg probing code uses type 1 and  isn't protected by a check for
noearly.  This patch fixes that problem.

Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:46 -08:00
Bjorn Helgaas
0663a36284 x86/PCI: make PCI bus locality messages more meaningful
Change PCI bus locality messages so they have a bit more context
and look like the rest of PCI, e.g.,

    - bus 01 -> node 0
    - bus 04 -> node 0
    + pci 0000:01: bus on NUMA node 0
    + pci 0000:04: bus on NUMA node 0

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:45 -08:00
Ingo Molnar
104bafcfab PCI: Don't carp about BAR allocation failures in quiet boot
These are easy to trigger (more or less harmlessly) with multiple video
cards, since the ROM BAR will typically not be given any space by the
BIOS bridge setup.  No reason to punish quiet boot for this.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:42 -08:00
Andrew Patterson
0ef5f8f615 ACPI/PCI: PCI extended config _OSC support called when root bridge added
The _OSC capability OSC_EXT_PCI_CONFIG_SUPPORT is set when the root
bridge is added with pci_acpi_osc_support() if we can access PCI
extended config space.

This adds the function pci_ext_cfg_avail which returns true if we can
access PCI extended config space (offset greater than 0xff). It
currently only returns false if arch=x86 and raw_pci_ext_ops is not set
(which might happen if pci=nommcfg is set on the kernel command-line).

Signed-off-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:28 -08:00
Jaswinder Singh Rajput
824877111c x86, pci: move arch/x86/pci/pci.h to arch/x86/include/asm/pci_x86.h
Impact: cleanup

Now that arch/x86/pci/pci.h is used in a number of other places as well,
move the lowlevel x86 pci definitions into the architecture include files.
(not to be confused with the existing arch/x86/include/asm/pci.h file,
which provides public details about x86 PCI)

Tested on: X86_32_UP, X86_32_SMP and X86_64_SMP

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29 18:17:36 +01:00
Ingo Molnar
fa623d1b02 Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core 2008-12-23 16:27:23 +01:00
Andreas Herrmann
ffd565a8b8 x86: fixup config space size of CPU functions for AMD family 11h
Impact: extend allowed configuration space access on 11h CPUs from 256 to 4K

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-26 03:53:27 +01:00
H. Peter Anvin
14d7ca5c57 x86: attempt reboot via port CF9 if we have standard PCI ports
Impact: Changes reboot behavior.

If port CF9 seems to be safe to touch, attempt it before trying the
keyboard controller.  Port CF9 is not available on all chipsets (a
significant but decreasing number of modern chipsets don't implement
it), but port CF9 itself should in general be safe to poke (no ill
effects if unimplemented) on any system which has PCI Configuration
Method #1 or #2, as it falls inside the PCI configuration port range
in both cases.  No chipset without PCI is known to have port CF9,
either, although an explicit "pci=bios" would mean we miss this and
therefore don't use port CF9.  An explicit "reboot=pci" can be used to
force the use of port CF9.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-11 16:19:48 -08:00
Ingo Molnar
7a9787e1eb Merge commit 'v2.6.28-rc2' into x86/pci-ioapic-boot-irq-quirks 2008-10-28 16:26:12 +01:00
Seth Heasley
37a84ec668 x86/PCI: irq and pci_ids patch for Intel Ibex Peak DeviceIDs
This patch updates the Intel Ibex Peak (PCH) LPC and SMBus Controller
DeviceIDs.

The LPC Controller ID is set by Firmware within the range of
0x3b00-3b1f.  This range is included in pci_ids.h using min and max
values, and irq.c now has code to handle the range (in lieu of 32
additions to a SWITCH statement).

The SMBus Controller ID is a fixed-value and will not change.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:53:48 -07:00
Bjorn Helgaas
d768cb6929 x86/PCI: follow lspci device/vendor style
Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format
used by lspci(8).

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:53:43 -07:00
Ingo Molnar
c00193f9f0 Merge branches 'oprofile-v2' and 'timers/hpet' into x86/core-v4 2008-10-13 14:18:42 +02:00
Ingo Molnar
0afe2db213 Merge branch 'x86/unify-cpu-detect' into x86-v28-for-linus-phase4-D
Conflicts:
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/signal_64.c
	include/asm-x86/cpufeature.h
2008-10-11 20:23:20 +02:00
Ingo Molnar
d84705969f Merge branch 'x86/apic' into x86-v28-for-linus-phase4-B
Conflicts:
	arch/x86/kernel/apic_32.c
	arch/x86/kernel/apic_64.c
	arch/x86/kernel/setup.c
	drivers/pci/intel-iommu.c
	include/asm-x86/cpufeature.h
	include/asm-x86/dma-mapping.h
2008-10-11 20:17:36 +02:00
Ingo Molnar
5e51900be6 Merge commit 'v2.6.27-rc6' into x86/cleanups 2008-09-19 09:15:50 +02:00