Commit Graph

65 Commits

Author SHA1 Message Date
Mauro Carvalho Chehab
65390ea01c Merge branch 'patchwork' into v4l_for_linus
* patchwork: (496 commits)
  [media] v4l: tvp5150: Add missing break in set control handler
  [media] v4l: tvp5150: Don't inline the tvp5150_selmux() function
  [media] v4l: tvp5150: Compile tvp5150_link_setup out if !CONFIG_MEDIA_CONTROLLER
  [media] em28xx: don't store usb_device at struct em28xx
  [media] em28xx: use usb_interface for dev_foo() calls
  [media] em28xx: don't change the device's name
  [media] mn88472: fix chip id check on probe
  [media] mn88473: fix chip id check on probe
  [media] lirc: fix error paths in lirc_cdev_add()
  [media] s5p-mfc: Add support for MFC v8 available in Exynos 5433 SoCs
  [media] s5p-mfc: Rework clock handling
  [media] s5p-mfc: Don't keep clock prepared all the time
  [media] s5p-mfc: Kill all IS_ERR_OR_NULL in clocks management code
  [media] s5p-mfc: Remove dead conditional code
  [media] s5p-mfc: Ensure that clock is disabled before turning power off
  [media] s5p-mfc: Remove special clock rate management
  [media] s5p-mfc: Use printk_ratelimited for reporting ioctl errors
  [media] s5p-mfc: Set DMA_ATTR_ALLOC_SINGLE_PAGES
  [media] vivid: Set color_enc on HSV formats
  [media] v4l2-tpg: Init hv_enc field with a valid value
  ...
2016-12-15 08:38:35 -02:00
Sanjeev
7d56f0facd Doc: Correct typo, "Introdution" => "Introduction"
This corrects a set of spelling mistakes, probably from an
automated conversion.

Signed-off-by: Sanjeev Gupta <ghane0@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-12-01 10:44:08 -07:00
Kieran Bingham
4710b752e0 [media] v4l: Add Renesas R-Car FDP1 Driver
The FDP1 driver performs advanced de-interlacing on a memory 2 memory
based video stream, and supports conversion from YCbCr/YUV
to RGB pixel formats

Signed-off-by: Kieran Bingham <kieran+renesas@bingham.xyz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16 16:21:54 -02:00
Laurent Pinchart
446e412597 [media] v4l: ctrls: Add deinterlacing mode control
The menu control selects the operation mode of a video deinterlacer. The
menu entries are driver specific.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran@bingham.xyz>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-16 16:16:08 -02:00
Mauro Carvalho Chehab
8c27ceff36 docs: fix locations of several documents that got moved
The previous patch renamed several files that are cross-referenced
along the Kernel documentation. Adjust the links to point to
the right places.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24 08:12:35 -02:00
Mauro Carvalho Chehab
3907fae86e [media] cardlist: convert them to asciiart tables
Instead of using codeblock for the cardlists, use tables, in
order to improve their visual when presenting them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24 07:23:50 -02:00
Mauro Carvalho Chehab
9fd79cf350 [media] gspca-cardlist.rst: update camera names
For those cameras that were missing descriptions, update using
some web research:
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_STV0680.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_ZC3XX.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_KINECT.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SPCA561.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_VICAM.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_DTCS033.html
	https://bugs.launchpad.net/ubuntu/+source/linux/+bug/564979
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_PAC7302.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SONIXB.html
	https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SONIXJ.html

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24 07:22:40 -02:00
Mauro Carvalho Chehab
c3739983d4 [media] gspca-cardlist.rst: update cardlist from drivers USB IDs
There are several missing USB IDs that are defined on gspca
drivers. Add them.

The missing entries were found/created using the following script:

<script>
use strict;
use File::Find;

my $src = "drivers/media/usb/gspca/";
my $table = 0;
my %data;

my $id;

my $len = 0;

open IN, "Documentation/media/v4l-drivers/gspca-cardlist.rst";
while (<IN>) {
	if (m/^=+\s+=+\s+=+$/) {
		$table++;
		next;
	}
	next if ($table != 2);
	if (m/^(\S+)\s+(\S+)\s+(.*)/) {
		$id = "$1_$2";
		$data{$id}->{driver} = $1;
		$data{$id}->{usb_id} = $2;
		$data{$id}->{name} = $3;
		$data{$id}->{valid} = 0;

		$len = length($3) if (length($3) > $len);
	}
}
close IN;

sub parse_dir {
        my $file = $File::Find::name;

	open IN, $file;

	my $driver = $file;

	$driver =~ s,($src),,;

	$driver =~ s,/.*,,;
	$driver =~ s,\.c$,,;

	while (<IN>) {
		next if (m,/\*.*USB_DEVICE,);
		if (m/USB_DEVICE[^\(]*\(\s*0x(\S+)\s*\,\s*0x(\S+)\)(.*)/) {
			my $n = "$1:$2";
			my $o = $3;
			$id = "${driver}_$n";

			$data{$id}->{valid} = 1;

			next if (defined $data{$id}->{driver});

			$data{$id}->{driver} = $driver;
			$data{$id}->{usb_id} = $n;

			if ($o =~ m,\/\*\s*(.*)\*\/,) {
				$n = $1;
				$n =~ s/\s+//;
				$data{$id}->{name} = $n;
			} else {
				$data{$id}->{name} = "";
			}
		}
	}
	close IN;
}

find({wanted => \&parse_dir, no_chdir => 1}, $src);

print "The gspca cards list\n";
print "====================\n\n";
print "The modules for the gspca webcam drivers are:\n\n";
print "- gspca_main: main driver\n";
print "- gspca\\_\\ *driver*: subdriver module with *driver* as follows\n\n";
print "=========	=========	" . "=" x $len . "\n";
print "*driver*	vend:prod	Device\n";
print "=========	=========	" . "=" x $len . "\n";

foreach my $id (sort { $data{$a}->{usb_id} . $data{$a}->{driver} cmp $data{$b}->{usb_id} . $data{$b}->{driver} } keys %data) {
	next if (!$data{$id}->{valid});

	my $s = sprintf "%-15s %s\t%s\n",
		$data{$id}->{driver}, $data{$id}->{usb_id}, $data{$id}->{name};

	# Replace tabs by spaces
	$s =~ s/[ \t]+$//;
        $s =~ s<^ {8}> <\t>;
        $s =~ s<^ {1,7}\t> <\t>;
        $s =~ s< {1,7}\t> <\t>;

	printf $s;
}
print "=========	=========	" . "=" x $len . "\n";
</script>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24 07:22:01 -02:00
Mauro Carvalho Chehab
959fe10443 [media] gspca-cardlist.rst: sort entries and adjust table margins
Some entries are out of order.

While here, clear spaces/tabs.

The content remains the same, with the exeption of one duplicated
entry from the same driver, where two different brand names share
the same entry. The content of such cell was merged, using a
comma.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-24 07:19:59 -02:00
Hans Verkuil
09d6e35fdf [media] v4l-drivers/fourcc.rst: fix typo
Linux4Linux -> Video4Linux

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-19 12:54:07 -03:00
Stephen Backway
dd9ad4fbf0 [media] cx23885: Add support for Hauppauge WinTV quadHD ATSC version
Add support for the Hauppauge WinTV quadHD ATSC version.
IR support has not been provided, all 4 tuners, demodulators etc are working.
Further documentation can be found on Linux TV wiki.

Signed-off-by: Stephen Backway <stev391@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-24 16:20:16 -03:00
Mauro Carvalho Chehab
8d4b231af9 [media] docs-rst: fix some .. note:: occurrences
On some places, either an space or the second ':' is missing.

Fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-22 10:36:57 -03:00
Mauro Carvalho Chehab
e653062450 [media] docs-rst: v4l2-drivers book: adjust column margins
A few tables are not properly output on LaTeX format.

Fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-22 10:35:20 -03:00
Mauro Carvalho Chehab
b6b6e67824 [media] docs-rst: better use the .. note:: tag
Change multi-line note tags to be more symetric, e. g. not starting
the text together witht the tag.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-22 10:02:29 -03:00
Mauro Carvalho Chehab
d271d3d9b3 [media] cx23885-cardlist.rst: add a new card
add card Hauppauge WinTV-QuadHD-DVB to the list.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23 08:14:48 -03:00
Mauro Carvalho Chehab
d888f8d7d8 [media] doc-rst: Fix license for the media books
The kAPI, v4l-drivers and dvb-drivers never used the
GNU FDL license. The addition of such license header were
just due to copy-and-paste. So, let's fix it.

As the media_kapi were part of device-drivers.tmp, it is
under GPL v2+.

The other two books is an agregation of files without any
license explicitly specified. So, they're all bound to the
Kernel's COPYING license. So, they're GPL v2 only.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23 08:03:24 -03:00
Mauro Carvalho Chehab
da83c888bf [media] doc-rst: better organize the media books
The uAPI book has 5 parts, but they lost numeration after
conversion to rst. Manually number those parts, and make
the main index with 1 depth, to only show the parts and
the annexes.

At each part, use :maxwidth: 5, in order to show a more
complete index.

While here, fix the cross-references between different
books.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23 08:03:24 -03:00
Mauro Carvalho Chehab
5b8700e9f9 [media] doc-rst: Fix some Sphinx warnings
Fix all remaining media warnings with ReST that are fixable
without changing at the Sphinx code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-23 08:03:24 -03:00
Mauro Carvalho Chehab
ef88f10eb8 [media] doc-rst: backward compatibility with older Sphinx versions
Sphinx is really evil when an older version finds an extra
attribute for the :toctree: tag: it simply ignores everything
and produce documents without any chapter inside!

As we're now using tags available only on Sphinx 1.4.x, we
need to use some creative ways to add a title before the
table of contents. Do that by using a css class.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-19 12:35:08 -03:00
Mauro Carvalho Chehab
e1813eda8e [media] doc-rst: better name the media books
The titles at the media books were misleading, and some books
were not numbered.

Rename the kAPI book to better reflect its contents, be more
consistent on the initial rst file for each book and better
name them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 15:01:20 -03:00
Mauro Carvalho Chehab
43efd1edc6 [media] get rid of Documentation/video4linux/lifeview.txt
Move the contents of this file to bttv.rst and saa7134.rst.

With that, we can finally remove Documentation/video4linux.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 14:28:58 -03:00
Mauro Carvalho Chehab
f0d17227d7 [media] cx88.rst: add contents of hauppauge-wintv-cx88-ir.txt
Import the contents of hauppauge-wintv-cx88-ir.txt, after
converted to ReST into cx88.rst file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 14:18:10 -03:00
Mauro Carvalho Chehab
2b8de4eabc [media] cx88.rst: add contents from not-in-cx2388x-datasheet.txt
There are some information about missing/wrong documentation at
cx231xx datasheet. Add it to the cx88 chapter.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 14:10:40 -03:00
Mauro Carvalho Chehab
d7b3ae79e1 [media] cx2341x.rst: add contents of README.vbi
Finally, adds the content of README.vbi at cx2341x.rst after
its conversion to ReST format.

Now, add information about this chipset and its driver is
inside a single chapter at the media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 14:07:10 -03:00
Mauro Carvalho Chehab
b3b7ea9aa7 [media] cx2341x: add contents of README.hm12
The README.hm12 file describes the proprietary format used
by this driver for raw format, called HM12. Add its description
at the document, after converted to ReST.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 14:01:51 -03:00
Mauro Carvalho Chehab
61116fbf20 [media] cx2341x.rst: add contents of fw-osd-api.txt
Convert it to ReST format and add to cx2341x.rst file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 13:56:43 -03:00
Mauro Carvalho Chehab
5e739096c2 [media] cx2341x.rst: add the contents of fw-upload.txt
Add the contents of fw-upload.txt, after converting it to
ReST format.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 13:45:27 -03:00
Mauro Carvalho Chehab
290bbbfe87 [media] cx2341x.rst: add contents of fw-memory.txt
Convert the content to ReST and add it at the cx231xx.rst
file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 13:42:17 -03:00
Mauro Carvalho Chehab
f8eb496f4c [media] cx2341x.rst: add contents of fw-dma.txt
Add the contents of fw-dma.txt, converted to ReST, and
drop the old file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 13:32:53 -03:00
Mauro Carvalho Chehab
d9b8a3f099 [media] cx2341x.rst: add the contents of fw-calling.txt
Convert it to ReST and add its contents at this file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 13:26:30 -03:00
Mauro Carvalho Chehab
91e71c2ba8 [media] cx2341x.rst: Add the contents of fw-encoder-api.txt
Convert its contents to ReST and add to cx2341x.rst.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 13:21:14 -03:00
Mauro Carvalho Chehab
81ef807e55 [media] cx2341x.rst: add fw-decoder-registers.txt content
Convert the contents of fw-decoder-registers.txt to ReST and
add it to cx2341x.rst file.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 13:16:31 -03:00
Mauro Carvalho Chehab
a785ddb868 [media] doc-rst: start adding documentation for cx2341x
move the contents of fw-decoder-api.txt to cx2341x and
convert it to ReST file, adding it to media/v4l-drivers

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 11:04:58 -03:00
Mauro Carvalho Chehab
d197a370d8 [media] doc-rst: add documentation for tuners
Convert bttv/Tuners to ReST and add it to the media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 10:38:35 -03:00
Mauro Carvalho Chehab
3f3edfd6d5 [media] doc-rst: add documentation for bttv driver
Convert it to ReST and add it to media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 10:30:59 -03:00
Mauro Carvalho Chehab
2287cb47fb [media] doc-rst: move bttv documentation to bttv.rst file
There were several files under Documentation/video4linux/bttv.

Instead of simply copying them to the rst folder, I opted to
merge into a single document and adjust the headers to
adjust the section levels and fix the cards tables.

There are two exceptions on the merge:

- The Tuners were renamed as a separate document, as they
  describe a separate driver;

- I removed the PROBLEMS section. It describes problems with
  the very first generation of 3D boards (Mistique/S3).
  It sounds very unlikely that someone would still need to
  install a bttv board on such hardware. Also, it is not
  very well written, IMHO.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-18 10:04:48 -03:00
Mauro Carvalho Chehab
2e97d6d301 [media] v4l-with-ir.rst: update it to reflect the current status
This document were really old. Update it to reflect the current
status of the IR drivers for TV.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:51:28 -03:00
Mauro Carvalho Chehab
31cae7ca8d [media] doc-rst: add documentation about IR on V4L boards
This section is outdated, but let's add it, after converting
to ReST, and then fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:51:28 -03:00
Mauro Carvalho Chehab
cff4c8acf2 [media] doc-rst: add vivid documentation
Convert it to ReST and add to media/v4l-drivers book.

As the sections here (and on other docs) are numbered,
let's also make this book auto-numbered.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:51:27 -03:00
Mauro Carvalho Chehab
7200e68967 [media] doc-rst: add documentation for Zoran driver
Convert it to ReST and add to media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:51:26 -03:00
Mauro Carvalho Chehab
a965d2024f [media] doc-rst: add documentation for uvcvideo
Convert it to ReST and add to media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:51:26 -03:00
Mauro Carvalho Chehab
c0d0138255 [media] doc-rst: add soc-camera documentation
Convert it to ReST format and add it at media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:51:25 -03:00
Mauro Carvalho Chehab
f1668f1d13 [media] doc-rst: add documentation for si476x
Convert it to ReST and add to media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:51:16 -03:00
Mauro Carvalho Chehab
b299357065 [media] doc-rst: add documentation for si4713
Convert it to ReST and add it to the media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:51:16 -03:00
Mauro Carvalho Chehab
b4a41387be [media] doc-rst: add documentation for si470x
Convert it to ReST and add to media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:51:15 -03:00
Mauro Carvalho Chehab
9cbfcd7cf2 [media] doc-rst: add sh_mobile_ceu_camera crop documentation
Convert it to ReST and add it to media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:51:14 -03:00
Mauro Carvalho Chehab
ae9d2873a8 [media] doc-rst: add documentation for saa7134
Convert it to ReST and add to the media/v4l-device book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:51:06 -03:00
Mauro Carvalho Chehab
6286d2b185 [media] doc-rst: add documentation for radiotrack
Convert it to ReST and add it to the media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:50:02 -03:00
Mauro Carvalho Chehab
f0bb8dd9ba [media] doc-rst: add pxa_camera documentation
Convert pxa_camera to ReST format and add it to the
media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:50:01 -03:00
Mauro Carvalho Chehab
1bb6f32af7 [media] doc-rst: add documentation for pvrusb2
Convert pvrusb2 documentation to ReST file and removed the note
about an html version of the documentation, as it is not
shipped inside the Kernel.

Add it to media/v4l-drivers book.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-17 22:50:01 -03:00